Commit Graph

274 Commits

Author SHA1 Message Date
Ulrich Weigand 47f3649374 [SystemZ] Fix assertion failure in adjustSubwordCmp
When comparing a zero-extended value against a constant small enough to
be in range of the inner type, it doesn't matter whether a signed or
unsigned compare operation (for the outer type) is being used.  This is
why the code in adjustSubwordCmp had this assertion:

    assert(C.ICmpType == SystemZICMP::Any &&
           "Signedness shouldn't matter here.");

assuming the the caller had already detected that fact.  However, it
turns out that there cases, in particular with always-true or always-
false conditions that have not been eliminated when compiling at -O0,
where this is not true.

Instead of failing an assertion if C.ICmpType is not SystemZICMP::Any
here, we can simply *set* it safely to SystemZICMP::Any, however.

llvm-svn: 255786
2015-12-16 18:04:06 +00:00
NAKAMURA Takumi 50024613e7 llvm/test/CodeGen/SystemZ/alloca-04.ll REQUIRES asserts due to -debug-pass.
llvm-svn: 254230
2015-11-28 13:05:49 +00:00
Jonas Paulsson f12b925bb1 [Stack realignment] Handling of aligned allocas.
This patch implements dynamic realignment of stack objects for targets
with a non-realigned stack pointer. Behaviour in FunctionLoweringInfo
is changed so that for a target that has StackRealignable set to
false, over-aligned static allocas are considered to be variable-sized
objects and are handled with DYNAMIC_STACKALLOC nodes.

It would be good to group aligned allocas into a single big alloca as
an optimization, but this is yet todo.

SystemZ benefits from this, due to its stack frame layout.

New tests SystemZ/alloca-03.ll for aligned allocas, and
SystemZ/alloca-04.ll for "no-realign-stack" attribute on functions.

Review and help from Ulrich Weigand and Hal Finkel.

llvm-svn: 254227
2015-11-28 11:02:32 +00:00
Jonas Paulsson 8f0d2b7f1f [DAGCombiner] Bugfix for lost chain depenedency.
When MergeConsecutiveStores() combines two loads and two stores into
wider loads and stores, the chain users of both of the original loads
must be transfered to the new load, because it may be that a chain
user only depends on one of the loads.

New test case: test/CodeGen/SystemZ/dag-combine-01.ll

Reviewed by James Y Knight.

Bugzilla: https://llvm.org/bugs/show_bug.cgi?id=25310#c6
llvm-svn: 253779
2015-11-21 13:25:07 +00:00
Pete Cooper 67cf9a723b Revert "Change memcpy/memset/memmove to have dest and source alignments."
This reverts commit r253511.

This likely broke the bots in
http://lab.llvm.org:8011/builders/clang-ppc64-elf-linux2/builds/20202
http://bb.pgr.jp/builders/clang-3stage-i686-linux/builds/3787

llvm-svn: 253543
2015-11-19 05:56:52 +00:00
Pete Cooper 72bc23ef02 Change memcpy/memset/memmove to have dest and source alignments.
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html

These intrinsics currently have an explicit alignment argument which is
required to be a constant integer.  It represents the alignment of the
source and dest, and so must be the minimum of those.

This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments.  The alignment
argument itself is removed.

There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe.  For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.

For example, code which used to read:
  call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
  call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)

For out of tree owners, I was able to strip alignment from calls using sed by replacing:
  (call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
  $1i1 false)

and similarly for memmove and memcpy.

I then added back in alignment to test cases which needed it.

A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.

In IRBuilder itself, a new argument was added.  Instead of calling:
  CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
  CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)

There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool.  This is to prevent isVolatile here from passing its default
parameter to the source alignment.

Note, changes in future can now be made to codegen.  I didn't change anything here, but this
change should enable better memcpy code sequences.

Reviewed by Hal Finkel.

llvm-svn: 253511
2015-11-18 22:17:24 +00:00
Jonas Paulsson af722f8287 [SelectionDAGBuilder] Make sure DemoteReg ends up in right reg-class.
The virtual register containing the address for returned value on
stack should in the DAG be represented with a CopyFromReg node and not
a Register node. Otherwise, InstrEmitter will not make sure that it
ends up in the right register class for the target instruction.

SystemZ needs this, becuause the reg class for address registers is a
subset of the general 64 bit register class.

test/SystemZ/CodeGen/args-07.ll and args-04.ll updated to run with
-verify-machineinstrs.

Reviewed by Hal Finkel.

llvm-svn: 253461
2015-11-18 14:59:00 +00:00
Jonas Paulsson 45d5c673ec [SystemZ] Make the CCRegs regclass non-allocatable.
This was discovered to be necessary while running memchr-01.ll with
-verify-machinstrs, because it is not allowed to have a phys reg live
accross block boundaries while on SSA form, if the register is
allocatable (expect in entry block and landing pads).

In this test case, stringRRE pseudos are expanded after isel by adding
a loop block which produces a live out CC register. To make the test
pass, it was also necessary to not say that StringRRELoop pseudo uses
R0L, this is only true for the StringRRE opcode.

-verify-machineinstrs added to memchr-01.ll test.

New test case int-cmp-51.ll to test that MachineCSE can eliminate
an identical compare (which it couldn't do before).

Reviewed by Ulrich Weigand

llvm-svn: 251634
2015-10-29 16:13:55 +00:00
Jonas Paulsson 72640f1c9f [MachineVerifier] Analyze MachineMemOperands for mem-to-mem moves.
Since the verifier will give false reports if it incorrectly thinks MI is
loading or storing using an FI, it is necessary to scan memoperands and
find out how the FI is used in the instruction. This should be relatively
rare.

Needed to make CodeGen/SystemZ/spill-01.ll pass, which now runs with this flag.

Reviewed by Quentin Colombet.

llvm-svn: 251620
2015-10-29 08:28:35 +00:00
Jonas Paulsson 83553d0cac [SystemZ] LTGFR use regclass should be GR32, not GR64.
Discovered by testing int-cmp-44.ll with -verify-machineinstrs (added to
test run).

llvm-svn: 251299
2015-10-26 15:03:49 +00:00
Jonas Paulsson 7da3820882 [SystemZ] Also clear kill flag for index reg in splitMove().
Discovered by running fp-move-05.ll with -verify-machineinstrs (added
to test case run).

llvm-svn: 251298
2015-10-26 15:03:41 +00:00
Jonas Paulsson 9525b2c0c8 [SystemZ] Don't forget the CC def op on LTEBRCompare pseudos
Discovered by running fp-cmp-02.ll with -verify-machineinstrs (now added
to test run).

llvm-svn: 251297
2015-10-26 15:03:32 +00:00
Jonas Paulsson dab7407258 [SystemZ] Tie operands in SystemZShorteInst if MI becomes 2-address.
Discovered by testing fp-add-02.ll with -verify-machineinstrs.

Test case updated to always run with -verify-machineinstrs.

llvm-svn: 251296
2015-10-26 15:03:07 +00:00
Jonas Paulsson 17ad04535f Let MachineVerifier be aware of mem-to-mem instructions.
A mem-to-mem instruction (that both loads and stores), which store to an
FI, cannot pass the verifier since it thinks it is loading from the FI.

For the mem-to-mem instruction, do a looser check in visitMachineOperand()
and only check liveness at the reg-slot while analyzing a frame index operand.

Needed to make CodeGen/SystemZ/xor-01.ll pass with -verify-machineinstrs,
which now runs with this flag.

Reviewed by Evan Cheng and Quentin Colombet.

llvm-svn: 250885
2015-10-21 07:39:47 +00:00
Jonas Paulsson 5558536a4e [SystemZ] Comment fix in test/CodeGen/SystemZ/fp-cmp-05.ll
llvm-svn: 250828
2015-10-20 15:05:54 +00:00
Jonas Paulsson 28fa48de32 [SystemZ] CodeGen/SystemZ/asm-18.ll run with -verify-machineinstrs
Relates to the fixes of r249811.

llvm-svn: 249946
2015-10-10 07:20:23 +00:00
Jonas Paulsson 63a2b6862e [SystemZ] Fixes in the backend I/R.
expandPostRAPseudo():
STX -> 2 * STD: The first STD should not have the kill flag set for the address.

SystemZElimCompare:
BRC -> BRCT conversion: Don't forget to remove the CC<use,kill> operand.

Needed to make SystemZ/asm-17.ll pass with -verify-machineinstrs, which
now runs with this flag.

Reviewed by Ulrich Weigand.

llvm-svn: 249945
2015-10-10 07:14:24 +00:00
Ulrich Weigand f4d14f781f [SystemZ] Fix another assertion failure in tryBuildVectorShuffle
This fixes yet another scenario where tryBuildVectorShuffle would
attempt to create a BUILD_VECTOR node with an invalid combination
of types.  This can happen if the incoming BUILD_VECTOR has elements
of a type different from the vector element type, which is allowed
in certain cases as long as they are all the same type.

When one of these elements is used in the residual vector, and
UNDEF elements are added to fill up the residual vector, those
UNDEFs then have to use the type of the original element, not
the vector element type, or else the resulting BUILD_VECTOR
will have an invalid type combination.

llvm-svn: 249706
2015-10-08 17:46:59 +00:00
Jonas Paulsson 5d3fbd3733 [SystemZ] SystemZElimCompare pass improved.
Compare elimination extended to recognize load-and-test instructions used
for comparison and eliminate them the same way as with compare instructions.

Test case fp-cmp-05.ll updated to expect optimized results now also for z13.

The order of instruction shortening and compare elimination passes have been
changed so that opcodes do not have to be handled in both passes.

Reviewed by Ulrich Weigand.

llvm-svn: 249666
2015-10-08 07:40:23 +00:00
Jonas Paulsson 7c5ce10a07 [SystemZ] Use load-and-test for fp compare with 0 if vector support is present.
Since the LTxBRCompare instructions can't be used with vector registers, a
normal load-and-test instruction (with a modelled def operand) is used instead.

Reviewed by Ulrich Weigand.

llvm-svn: 249664
2015-10-08 07:40:16 +00:00
Jonas Paulsson 12629324a4 [SystemZ] Add some generic (floating point support) load instructions.
Add generic instructions for load complement, load negative and load positive
for fp32 and fp64, and let isel prefer them. They do not clobber CC, and so
give scheduler more freedom. SystemZElimCompare pass will convert them when it
can to the CC-setting variants.

Regression tests updated to expect the new opcodes in places where the old ones
where used. New test case SystemZ/fp-cmp-05.ll checks that
SystemZCompareElim.cpp can handle the new opcodes.

README.txt updated (bullet removed).

Note that fp128 is not yet handled, because it is relatively rare, and is a
bit trickier, because of the fact that l.dfr would operate on the sign bit of
one of the subregisters of a fp128, but we would not want to copy the other
sub-reg in case src and dst regs are not the same.

Reviewed by Ulrich Weigand.

llvm-svn: 249046
2015-10-01 18:12:28 +00:00
Ulrich Weigand 126caeb043 [SystemZ] Fix expansion of ISD::FPOW and ISD::FSINCOS
The ISD::FPOW and ISD::FSINCOS opcodes default to Legal, but there
is no legal instruction for those on SystemZ.  This could cause
LLVM internal errors.  Fixed by setting the operation action to
Expand for those opcodes.

Also added test cases for all other LLVM IR intrinsics that should
generate a library call.  (Those already work correctly since the
default operation action is fine.)

llvm-svn: 248180
2015-09-21 17:35:45 +00:00
Ulrich Weigand e861e6442c [SystemZ] Fix assertion failure in tryBuildVectorShuffle
Under certain circumstances, tryBuildVectorShuffle would attempt to
create a BUILD_VECTOR node with an invalid combination of types.
This happened when one of the components of the original BUILD_VECTOR
was itself a TRUNCATE node.  That TRUNCATE was stripped off during
intermediate processing to simplify code, but when adding the node
back to the result vector, we still need it to get the type right.

llvm-svn: 247694
2015-09-15 14:27:46 +00:00
Matt Arsenault d9c830154f Make MergeConsecutiveStores look at other stores on same chain
When combiner AA is enabled, look at stores on the same chain.
Non-aliasing stores are moved to the same chain so the existing
code fails because it expects to find an adajcent store on a consecutive
chain.

Because of how DAGCombiner tries these store combines,
MergeConsecutiveStores doesn't see the correct set of stores on the chain
when it visits the other stores. Each store individually has its chain
fixed before trying to merge consecutive stores, and then tries to merge
stores from that point before the other stores have been processed to
have their chains fixed. To fix this, attempt to use FindBetterChain
on any possibly neighboring stores in visitSTORE.

Suppose you have 4 32-bit stores that should be merged into 1 vector
store. One store would be visited first, fixing the chain. What happens is
because not all of the store chains have yet been fixed, 2 of the stores
are merged. The other 2 stores later have their chains fixed,
but because the other stores were already merged, they have different
memory types and merging the two different sized stores is not
supported and would be more difficult to handle.

llvm-svn: 246307
2015-08-28 17:31:28 +00:00
Simon Pilgrim 0750c84623 [DAGCombiner] Attempt to mask vectors before zero extension instead of after.
For cases where we TRUNCATE and then ZERO_EXTEND to a larger size (often from vector legalization), see if we can mask the source data and then ZERO_EXTEND (instead of after a ANY_EXTEND). This can help avoid having to generate a larger mask, and possibly applying it to several sub-vectors.

(zext (truncate x)) -> (zext (and(x, m))

Includes a minor patch to SystemZ to better recognise 8/16-bit zero extension patterns from RISBG bit-extraction code.

This is the first of a number of minor patches to help improve the conversion of byte masks to clear mask shuffles.

Differential Revision: http://reviews.llvm.org/D11764

llvm-svn: 245160
2015-08-15 13:27:30 +00:00
Ulrich Weigand a887f06214 [SystemZ] Support large LLVM IR struct return values
Recent mesa/llvmpipe crashes on SystemZ due to a failed assertion when
attempting to compile a routine with a return type of
  { <4 x float>, <4 x float>, <4 x float>, <4 x float> }
on a system without vector instruction support.

This is because after legalizing the vector type, we get a return value
consisting of 16 floats, which cannot all be returned in registers.

Usually, what should happen in this case is that the target's CanLowerReturn
routine rejects the return type, in which case SelectionDAG falls back to
implementing a structure return in memory via implicit reference.

However, the SystemZ target never actually implemented any CanLowerReturn
routine, and thus would accept any struct return type.

This patch fixes the crash by implementing CanLowerReturn.  As a side effect,
this also handles fp128 return values, fixing a todo that was noted in
SystemZCallingConv.td.

llvm-svn: 244889
2015-08-13 13:37:06 +00:00
Ulrich Weigand 9958c489bb [DAGCombiner] Account for getVectorIdxTy() when narrowing vector load
This patch makes ReplaceExtractVectorEltOfLoadWithNarrowedLoad convert
the element number from getVectorIdxTy() to PtrTy before doing pointer
arithmetic on it.  This is needed on z, where element numbers are i32
but pointers are i64.

Original patch by Richard Sandiford.

llvm-svn: 236530
2015-05-05 19:34:10 +00:00
Ulrich Weigand af2c618e2b [DAGCombiner] Fix ReplaceExtractVectorEltOfLoadWithNarrowedLoad for BE
For little-endian, the function would convert (extract_vector_elt (load X), Y)
to X + Y*sizeof(elt).  For big-endian it would instead use
X + sizeof(vec) - Y*sizeof(elt).  The big-endian case wasn't right since
vector index order always follows memory/array order, even for big-endian.
(Note that the current handling has to be wrong for Y==0 since it would
access beyond the end of the vector.)

Original patch by Richard Sandiford.

llvm-svn: 236529
2015-05-05 19:33:37 +00:00
Ulrich Weigand 2693c0a491 [LegalizeVectorTypes] Allow single loads and stores for more short vectors
When lowering a load or store for TypeWidenVector, the type legalizer
would use a single load or store if the associated integer type was legal.
E.g. it would load a v4i8 as an i32 if i32 was legal.

This patch extends that behavior to promoted integers as well as legal ones.
If the integer type for the full vector width is TypePromoteInteger,
the element type is going to be TypePromoteInteger too, and it's still
better to use a single promoting load or truncating store rather than N
individual promoting loads or truncating stores.  E.g. if you have a v2i8
on a target where i16 is promoted to i32, it's better to load the v2i8 as
an i16 rather than load both i8s individually.

Original patch by Richard Sandiford.

llvm-svn: 236528
2015-05-05 19:32:57 +00:00
Ulrich Weigand c1708b2618 [SystemZ] Add vector intrinsics
This adds intrinsics to allow access to all of the z13 vector instructions.
Note that instructions whose semantics can be described by standard LLVM IR
do not get any intrinsics.

For each instructions whose semantics *cannot* (fully) be described, we
define an LLVM IR target-specific intrinsic that directly maps to this
instruction.

For instructions that also set the condition code, the LLVM IR intrinsic
returns the post-instruction CC value as a second result.  Instruction
selection will attempt to detect code that compares that CC value against
constants and use the condition code directly instead.

Based on a patch by Richard Sandiford.

llvm-svn: 236527
2015-05-05 19:31:09 +00:00
Ulrich Weigand 5211f9ff4d [SystemZ] Mark v1i128 and v1f128 as unsupported
The ABI specifies that <1 x i128> and <1 x fp128> are supposed to be
passed in vector registers.  We do not yet support those types, and
some infrastructure is missing before we can do so.

In order to prevent accidentally generating code violating the ABI,
this patch adds checks to detect those types and error out if user
code attempts to use them.

llvm-svn: 236526
2015-05-05 19:30:05 +00:00
Ulrich Weigand cd2a1b5341 [SystemZ] Handle sub-128 vectors
The ABI allows sub-128 vectors to be passed and returned in registers,
with the vector occupying the upper part of a register.  We therefore
want to legalize those types by widening the vector rather than promoting
the elements.

The patch includes some simple tests for sub-128 vectors and also tests
that we can recognize various pack sequences, some of which use sub-128
vectors as temporary results.  One of these forms is based on the pack
sequences generated by llvmpipe when no intrinsics are used.

Signed unpacks are recognized as BUILD_VECTORs whose elements are
individually sign-extended.  Unsigned unpacks can have the equivalent
form with zero extension, but they also occur as shuffles in which some
elements are zero.

Based on a patch by Richard Sandiford.

llvm-svn: 236525
2015-05-05 19:29:21 +00:00
Ulrich Weigand 49506d78e7 [SystemZ] Add CodeGen support for scalar f64 ops in vector registers
The z13 vector facility includes some instructions that operate only on the
high f64 in a v2f64, effectively extending the FP register set from 16
to 32 registers.  It's still better to use the old instructions if the
operands happen to fit though, since the older instructions have a shorter
encoding.

Based on a patch by Richard Sandiford.

llvm-svn: 236524
2015-05-05 19:28:34 +00:00
Ulrich Weigand 80b3af7ab3 [SystemZ] Add CodeGen support for v4f32
The architecture doesn't really have any native v4f32 operations except
v4f32->v2f64 and v2f64->v4f32 conversions, with only half of the v4f32
elements being used.  Even so, using vector registers for <4 x float>
and scalarising individual operations is much better than generating
completely scalar code, since there's much less register pressure.
It's also more efficient to do v4f32 comparisons by extending to 2
v2f64s, comparing those, then packing the result.

This particularly helps with llvmpipe.

Based on a patch by Richard Sandiford.

llvm-svn: 236523
2015-05-05 19:27:45 +00:00
Ulrich Weigand cd808237b2 [SystemZ] Add CodeGen support for v2f64
This adds ABI and CodeGen support for the v2f64 type, which is natively
supported by z13 instructions.

Based on a patch by Richard Sandiford.

llvm-svn: 236522
2015-05-05 19:26:48 +00:00
Ulrich Weigand ce4c109585 [SystemZ] Add CodeGen support for integer vector types
This the first of a series of patches to add CodeGen support exploiting
the instructions of the z13 vector facility.  This patch adds support
for the native integer vector types (v16i8, v8i16, v4i32, v2i64).

When the vector facility is present, we default to the new vector ABI.
This is characterized by two major differences:
- Vector types are passed/returned in vector registers
  (except for unnamed arguments of a variable-argument list function).
- Vector types are at most 8-byte aligned.

The reason for the choice of 8-byte vector alignment is that the hardware
is able to efficiently load vectors at 8-byte alignment, and the ABI only
guarantees 8-byte alignment of the stack pointer, so requiring any higher
alignment for vectors would require dynamic stack re-alignment code.

However, for compatibility with old code that may use vector types, when
*not* using the vector facility, the old alignment rules (vector types
are naturally aligned) remain in use.

These alignment rules are not only implemented at the C language level
(implemented in clang), but also at the LLVM IR level.  This is done
by selecting a different DataLayout string depending on whether the
vector ABI is in effect or not.

Based on a patch by Richard Sandiford.

llvm-svn: 236521
2015-05-05 19:25:42 +00:00
Krzysztof Parzyszek a46c36b8f4 Allow memory intrinsics to be tail calls
llvm-svn: 234764
2015-04-13 17:16:45 +00:00
Ulrich Weigand 57c85f53ba [SystemZ] Support transactional execution on zEC12
The zEC12 provides the transactional-execution facility.  This is exposed
to users via a set of builtin routines on other compilers.  This patch
adds LLVM support to enable those builtins.  In partciular, the patch:

- adds the transactional-execution and processor-assist facilities
- adds MC support for all instructions provided by those facilities
- adds LLVM intrinsics for those instructions and hooks them up for CodeGen
- adds CodeGen support to optimize CC return value checking

Since this is first use of target-specific intrinsics on the platform,
the patch creates the include/llvm/IR/IntrinsicsSystemZ.td file and
hooks it up in Intrinsics.td.  I've also changed Triple::getArchTypePrefix
to return "s390" instead of "systemz", since the naming convention for
GCC intrinsics uses "s390" on the platform, and it neemed more straight-
forward to use the same convention for LLVM IR intrinsics.

An associated clang patch makes the intrinsics (and command line switches)
available at the source-language level.

For reference, the transactional-execution instructions are documented
in the z/Architecture Principles of Operation for the zEC12:
http://publibfp.boulder.ibm.com/cgi-bin/bookmgr/download/DZ9ZR009.pdf
The associated builtins are documented in the GCC manual:
http://gcc.gnu.org/onlinedocs/gcc/S_002f390-System-z-Built-in-Functions.html


Index: llvm-head/lib/Target/SystemZ/SystemZOperators.td
===================================================================
--- llvm-head.orig/lib/Target/SystemZ/SystemZOperators.td
+++ llvm-head/lib/Target/SystemZ/SystemZOperators.td
@@ -79,6 +79,9 @@ def SDT_ZI32Intrinsic       : SDTypeProf
 def SDT_ZPrefetch           : SDTypeProfile<0, 2,
                                             [SDTCisVT<0, i32>,
                                              SDTCisPtrTy<1>]>;
+def SDT_ZTBegin             : SDTypeProfile<0, 2,
+                                            [SDTCisPtrTy<0>,
+                                             SDTCisVT<1, i32>]>;
 
 //===----------------------------------------------------------------------===//
 // Node definitions
@@ -180,6 +183,15 @@ def z_prefetch          : SDNode<"System
                                  [SDNPHasChain, SDNPMayLoad, SDNPMayStore,
                                   SDNPMemOperand]>;
 
+def z_tbegin            : SDNode<"SystemZISD::TBEGIN", SDT_ZTBegin,
+                                 [SDNPHasChain, SDNPOutGlue, SDNPMayStore,
+                                  SDNPSideEffect]>;
+def z_tbegin_nofloat    : SDNode<"SystemZISD::TBEGIN_NOFLOAT", SDT_ZTBegin,
+                                 [SDNPHasChain, SDNPOutGlue, SDNPMayStore,
+                                  SDNPSideEffect]>;
+def z_tend              : SDNode<"SystemZISD::TEND", SDTNone,
+                                 [SDNPHasChain, SDNPOutGlue, SDNPSideEffect]>;
+
 //===----------------------------------------------------------------------===//
 // Pattern fragments
 //===----------------------------------------------------------------------===//
Index: llvm-head/lib/Target/SystemZ/SystemZInstrFormats.td
===================================================================
--- llvm-head.orig/lib/Target/SystemZ/SystemZInstrFormats.td
+++ llvm-head/lib/Target/SystemZ/SystemZInstrFormats.td
@@ -473,6 +473,17 @@ class InstSS<bits<8> op, dag outs, dag i
   let Inst{15-0}  = BD2;
 }
 
+class InstS<bits<16> op, dag outs, dag ins, string asmstr, list<dag> pattern>
+  : InstSystemZ<4, outs, ins, asmstr, pattern> {
+  field bits<32> Inst;
+  field bits<32> SoftFail = 0;
+
+  bits<16> BD2;
+
+  let Inst{31-16} = op;
+  let Inst{15-0}  = BD2;
+}
+
 //===----------------------------------------------------------------------===//
 // Instruction definitions with semantics
 //===----------------------------------------------------------------------===//
Index: llvm-head/lib/Target/SystemZ/SystemZInstrInfo.td
===================================================================
--- llvm-head.orig/lib/Target/SystemZ/SystemZInstrInfo.td
+++ llvm-head/lib/Target/SystemZ/SystemZInstrInfo.td
@@ -1362,6 +1362,60 @@ let Defs = [CC] in {
 }
 
 //===----------------------------------------------------------------------===//
+// Transactional execution
+//===----------------------------------------------------------------------===//
+
+let Predicates = [FeatureTransactionalExecution] in {
+  // Transaction Begin
+  let hasSideEffects = 1, mayStore = 1,
+      usesCustomInserter = 1, Defs = [CC] in {
+    def TBEGIN : InstSIL<0xE560,
+                         (outs), (ins bdaddr12only:$BD1, imm32zx16:$I2),
+                         "tbegin\t$BD1, $I2",
+                         [(z_tbegin bdaddr12only:$BD1, imm32zx16:$I2)]>;
+    def TBEGIN_nofloat : Pseudo<(outs), (ins bdaddr12only:$BD1, imm32zx16:$I2),
+                                [(z_tbegin_nofloat bdaddr12only:$BD1,
+                                                   imm32zx16:$I2)]>;
+    def TBEGINC : InstSIL<0xE561,
+                          (outs), (ins bdaddr12only:$BD1, imm32zx16:$I2),
+                          "tbeginc\t$BD1, $I2",
+                          [(int_s390_tbeginc bdaddr12only:$BD1,
+                                             imm32zx16:$I2)]>;
+  }
+
+  // Transaction End
+  let hasSideEffects = 1, Defs = [CC], BD2 = 0 in
+    def TEND : InstS<0xB2F8, (outs), (ins), "tend", [(z_tend)]>;
+
+  // Transaction Abort
+  let hasSideEffects = 1, isTerminator = 1, isBarrier = 1 in
+    def TABORT : InstS<0xB2FC, (outs), (ins bdaddr12only:$BD2),
+                       "tabort\t$BD2",
+                       [(int_s390_tabort bdaddr12only:$BD2)]>;
+
+  // Nontransactional Store
+  let hasSideEffects = 1 in
+    def NTSTG : StoreRXY<"ntstg", 0xE325, int_s390_ntstg, GR64, 8>;
+
+  // Extract Transaction Nesting Depth
+  let hasSideEffects = 1 in
+    def ETND : InherentRRE<"etnd", 0xB2EC, GR32, (int_s390_etnd)>;
+}
+
+//===----------------------------------------------------------------------===//
+// Processor assist
+//===----------------------------------------------------------------------===//
+
+let Predicates = [FeatureProcessorAssist] in {
+  let hasSideEffects = 1, R4 = 0 in
+    def PPA : InstRRF<0xB2E8, (outs), (ins GR64:$R1, GR64:$R2, imm32zx4:$R3),
+                      "ppa\t$R1, $R2, $R3", []>;
+  def : Pat<(int_s390_ppa_txassist GR32:$src),
+            (PPA (INSERT_SUBREG (i64 (IMPLICIT_DEF)), GR32:$src, subreg_l32),
+                 0, 1)>;
+}
+
+//===----------------------------------------------------------------------===//
 // Miscellaneous Instructions.
 //===----------------------------------------------------------------------===//
 
Index: llvm-head/lib/Target/SystemZ/SystemZProcessors.td
===================================================================
--- llvm-head.orig/lib/Target/SystemZ/SystemZProcessors.td
+++ llvm-head/lib/Target/SystemZ/SystemZProcessors.td
@@ -60,6 +60,16 @@ def FeatureMiscellaneousExtensions : Sys
   "Assume that the miscellaneous-extensions facility is installed"
 >;
 
+def FeatureTransactionalExecution : SystemZFeature<
+  "transactional-execution", "TransactionalExecution",
+  "Assume that the transactional-execution facility is installed"
+>;
+
+def FeatureProcessorAssist : SystemZFeature<
+  "processor-assist", "ProcessorAssist",
+  "Assume that the processor-assist facility is installed"
+>;
+
 def : Processor<"generic", NoItineraries, []>;
 def : Processor<"z10", NoItineraries, []>;
 def : Processor<"z196", NoItineraries,
@@ -70,4 +80,5 @@ def : Processor<"zEC12", NoItineraries,
                 [FeatureDistinctOps, FeatureLoadStoreOnCond, FeatureHighWord,
                  FeatureFPExtension, FeaturePopulationCount,
                  FeatureFastSerialization, FeatureInterlockedAccess1,
-                 FeatureMiscellaneousExtensions]>;
+                 FeatureMiscellaneousExtensions,
+                 FeatureTransactionalExecution, FeatureProcessorAssist]>;
Index: llvm-head/lib/Target/SystemZ/SystemZSubtarget.cpp
===================================================================
--- llvm-head.orig/lib/Target/SystemZ/SystemZSubtarget.cpp
+++ llvm-head/lib/Target/SystemZ/SystemZSubtarget.cpp
@@ -40,6 +40,7 @@ SystemZSubtarget::SystemZSubtarget(const
       HasLoadStoreOnCond(false), HasHighWord(false), HasFPExtension(false),
       HasPopulationCount(false), HasFastSerialization(false),
       HasInterlockedAccess1(false), HasMiscellaneousExtensions(false),
+      HasTransactionalExecution(false), HasProcessorAssist(false),
       TargetTriple(TT), InstrInfo(initializeSubtargetDependencies(CPU, FS)),
       TLInfo(TM, *this), TSInfo(*TM.getDataLayout()), FrameLowering() {}
 
Index: llvm-head/lib/Target/SystemZ/SystemZSubtarget.h
===================================================================
--- llvm-head.orig/lib/Target/SystemZ/SystemZSubtarget.h
+++ llvm-head/lib/Target/SystemZ/SystemZSubtarget.h
@@ -42,6 +42,8 @@ protected:
   bool HasFastSerialization;
   bool HasInterlockedAccess1;
   bool HasMiscellaneousExtensions;
+  bool HasTransactionalExecution;
+  bool HasProcessorAssist;
 
 private:
   Triple TargetTriple;
@@ -102,6 +104,12 @@ public:
     return HasMiscellaneousExtensions;
   }
 
+  // Return true if the target has the transactional-execution facility.
+  bool hasTransactionalExecution() const { return HasTransactionalExecution; }
+
+  // Return true if the target has the processor-assist facility.
+  bool hasProcessorAssist() const { return HasProcessorAssist; }
+
   // Return true if GV can be accessed using LARL for reloc model RM
   // and code model CM.
   bool isPC32DBLSymbol(const GlobalValue *GV, Reloc::Model RM,
Index: llvm-head/lib/Support/Triple.cpp
===================================================================
--- llvm-head.orig/lib/Support/Triple.cpp
+++ llvm-head/lib/Support/Triple.cpp
@@ -92,7 +92,7 @@ const char *Triple::getArchTypePrefix(Ar
   case sparcv9:
   case sparc:       return "sparc";
 
-  case systemz:     return "systemz";
+  case systemz:     return "s390";
 
   case x86:
   case x86_64:      return "x86";
Index: llvm-head/include/llvm/IR/Intrinsics.td
===================================================================
--- llvm-head.orig/include/llvm/IR/Intrinsics.td
+++ llvm-head/include/llvm/IR/Intrinsics.td
@@ -634,3 +634,4 @@ include "llvm/IR/IntrinsicsNVVM.td"
 include "llvm/IR/IntrinsicsMips.td"
 include "llvm/IR/IntrinsicsR600.td"
 include "llvm/IR/IntrinsicsBPF.td"
+include "llvm/IR/IntrinsicsSystemZ.td"
Index: llvm-head/include/llvm/IR/IntrinsicsSystemZ.td
===================================================================
--- /dev/null
+++ llvm-head/include/llvm/IR/IntrinsicsSystemZ.td
@@ -0,0 +1,46 @@
+//===- IntrinsicsSystemZ.td - Defines SystemZ intrinsics ---*- tablegen -*-===//
+//
+//                     The LLVM Compiler Infrastructure
+//
+// This file is distributed under the University of Illinois Open Source
+// License. See LICENSE.TXT for details.
+//
+//===----------------------------------------------------------------------===//
+//
+// This file defines all of the SystemZ-specific intrinsics.
+//
+//===----------------------------------------------------------------------===//
+
+//===----------------------------------------------------------------------===//
+//
+// Transactional-execution intrinsics
+//
+//===----------------------------------------------------------------------===//
+
+let TargetPrefix = "s390" in {
+  def int_s390_tbegin : Intrinsic<[llvm_i32_ty], [llvm_ptr_ty, llvm_i32_ty],
+                                  [IntrNoDuplicate]>;
+
+  def int_s390_tbegin_nofloat : Intrinsic<[llvm_i32_ty],
+                                          [llvm_ptr_ty, llvm_i32_ty],
+                                          [IntrNoDuplicate]>;
+
+  def int_s390_tbeginc : Intrinsic<[], [llvm_ptr_ty, llvm_i32_ty],
+                                   [IntrNoDuplicate]>;
+
+  def int_s390_tabort : Intrinsic<[], [llvm_i64_ty],
+                                  [IntrNoReturn, Throws]>;
+
+  def int_s390_tend : GCCBuiltin<"__builtin_tend">,
+                      Intrinsic<[llvm_i32_ty], []>;
+
+  def int_s390_etnd : GCCBuiltin<"__builtin_tx_nesting_depth">,
+                      Intrinsic<[llvm_i32_ty], [], [IntrNoMem]>;
+
+  def int_s390_ntstg : Intrinsic<[], [llvm_i64_ty, llvm_ptr64_ty],
+                                 [IntrReadWriteArgMem]>;
+
+  def int_s390_ppa_txassist : GCCBuiltin<"__builtin_tx_assist">,
+                              Intrinsic<[], [llvm_i32_ty]>;
+}
+
Index: llvm-head/lib/Target/SystemZ/SystemZ.h
===================================================================
--- llvm-head.orig/lib/Target/SystemZ/SystemZ.h
+++ llvm-head/lib/Target/SystemZ/SystemZ.h
@@ -68,6 +68,18 @@ const unsigned CCMASK_TM_MSB_0       = C
 const unsigned CCMASK_TM_MSB_1       = CCMASK_2 | CCMASK_3;
 const unsigned CCMASK_TM             = CCMASK_ANY;
 
+// Condition-code mask assignments for TRANSACTION_BEGIN.
+const unsigned CCMASK_TBEGIN_STARTED       = CCMASK_0;
+const unsigned CCMASK_TBEGIN_INDETERMINATE = CCMASK_1;
+const unsigned CCMASK_TBEGIN_TRANSIENT     = CCMASK_2;
+const unsigned CCMASK_TBEGIN_PERSISTENT    = CCMASK_3;
+const unsigned CCMASK_TBEGIN               = CCMASK_ANY;
+
+// Condition-code mask assignments for TRANSACTION_END.
+const unsigned CCMASK_TEND_TX   = CCMASK_0;
+const unsigned CCMASK_TEND_NOTX = CCMASK_2;
+const unsigned CCMASK_TEND      = CCMASK_TEND_TX | CCMASK_TEND_NOTX;
+
 // The position of the low CC bit in an IPM result.
 const unsigned IPM_CC = 28;
 
Index: llvm-head/lib/Target/SystemZ/SystemZISelLowering.h
===================================================================
--- llvm-head.orig/lib/Target/SystemZ/SystemZISelLowering.h
+++ llvm-head/lib/Target/SystemZ/SystemZISelLowering.h
@@ -146,6 +146,15 @@ enum {
   // Perform a serialization operation.  (BCR 15,0 or BCR 14,0.)
   SERIALIZE,
 
+  // Transaction begin.  The first operand is the chain, the second
+  // the TDB pointer, and the third the immediate control field.
+  // Returns chain and glue.
+  TBEGIN,
+  TBEGIN_NOFLOAT,
+
+  // Transaction end.  Just the chain operand.  Returns chain and glue.
+  TEND,
+
   // Wrappers around the inner loop of an 8- or 16-bit ATOMIC_SWAP or
   // ATOMIC_LOAD_<op>.
   //
@@ -318,6 +327,7 @@ private:
   SDValue lowerSTACKSAVE(SDValue Op, SelectionDAG &DAG) const;
   SDValue lowerSTACKRESTORE(SDValue Op, SelectionDAG &DAG) const;
   SDValue lowerPREFETCH(SDValue Op, SelectionDAG &DAG) const;
+  SDValue lowerINTRINSIC_W_CHAIN(SDValue Op, SelectionDAG &DAG) const;
 
   // If the last instruction before MBBI in MBB was some form of COMPARE,
   // try to replace it with a COMPARE AND BRANCH just before MBBI.
@@ -355,6 +365,10 @@ private:
   MachineBasicBlock *emitStringWrapper(MachineInstr *MI,
                                        MachineBasicBlock *BB,
                                        unsigned Opcode) const;
+  MachineBasicBlock *emitTransactionBegin(MachineInstr *MI,
+                                          MachineBasicBlock *MBB,
+                                          unsigned Opcode,
+                                          bool NoFloat) const;
 };
 } // end namespace llvm
 
Index: llvm-head/lib/Target/SystemZ/SystemZISelLowering.cpp
===================================================================
--- llvm-head.orig/lib/Target/SystemZ/SystemZISelLowering.cpp
+++ llvm-head/lib/Target/SystemZ/SystemZISelLowering.cpp
@@ -20,6 +20,7 @@
 #include "llvm/CodeGen/MachineInstrBuilder.h"
 #include "llvm/CodeGen/MachineRegisterInfo.h"
 #include "llvm/CodeGen/TargetLoweringObjectFileImpl.h"
+#include "llvm/IR/Intrinsics.h"
 #include <cctype>
 
 using namespace llvm;
@@ -304,6 +305,9 @@ SystemZTargetLowering::SystemZTargetLowe
   // Codes for which we want to perform some z-specific combinations.
   setTargetDAGCombine(ISD::SIGN_EXTEND);
 
+  // Handle intrinsics.
+  setOperationAction(ISD::INTRINSIC_W_CHAIN, MVT::Other, Custom);
+
   // We want to use MVC in preference to even a single load/store pair.
   MaxStoresPerMemcpy = 0;
   MaxStoresPerMemcpyOptSize = 0;
@@ -1031,6 +1035,53 @@ prepareVolatileOrAtomicLoad(SDValue Chai
   return DAG.getNode(SystemZISD::SERIALIZE, DL, MVT::Other, Chain);
 }
 
+// Return true if Op is an intrinsic node with chain that returns the CC value
+// as its only (other) argument.  Provide the associated SystemZISD opcode and
+// the mask of valid CC values if so.
+static bool isIntrinsicWithCCAndChain(SDValue Op, unsigned &Opcode,
+                                      unsigned &CCValid) {
+  unsigned Id = cast<ConstantSDNode>(Op.getOperand(1))->getZExtValue();
+  switch (Id) {
+  case Intrinsic::s390_tbegin:
+    Opcode = SystemZISD::TBEGIN;
+    CCValid = SystemZ::CCMASK_TBEGIN;
+    return true;
+
+  case Intrinsic::s390_tbegin_nofloat:
+    Opcode = SystemZISD::TBEGIN_NOFLOAT;
+    CCValid = SystemZ::CCMASK_TBEGIN;
+    return true;
+
+  case Intrinsic::s390_tend:
+    Opcode = SystemZISD::TEND;
+    CCValid = SystemZ::CCMASK_TEND;
+    return true;
+
+  default:
+    return false;
+  }
+}
+
+// Emit an intrinsic with chain with a glued value instead of its CC result.
+static SDValue emitIntrinsicWithChainAndGlue(SelectionDAG &DAG, SDValue Op,
+                                             unsigned Opcode) {
+  // Copy all operands except the intrinsic ID.
+  unsigned NumOps = Op.getNumOperands();
+  SmallVector<SDValue, 6> Ops;
+  Ops.reserve(NumOps - 1);
+  Ops.push_back(Op.getOperand(0));
+  for (unsigned I = 2; I < NumOps; ++I)
+    Ops.push_back(Op.getOperand(I));
+
+  assert(Op->getNumValues() == 2 && "Expected only CC result and chain");
+  SDVTList RawVTs = DAG.getVTList(MVT::Other, MVT::Glue);
+  SDValue Intr = DAG.getNode(Opcode, SDLoc(Op), RawVTs, Ops);
+  SDValue OldChain = SDValue(Op.getNode(), 1);
+  SDValue NewChain = SDValue(Intr.getNode(), 0);
+  DAG.ReplaceAllUsesOfValueWith(OldChain, NewChain);
+  return Intr;
+}
+
 // CC is a comparison that will be implemented using an integer or
 // floating-point comparison.  Return the condition code mask for
 // a branch on true.  In the integer case, CCMASK_CMP_UO is set for
@@ -1588,9 +1639,53 @@ static void adjustForTestUnderMask(Selec
   C.CCMask = NewCCMask;
 }
 
+// Return a Comparison that tests the condition-code result of intrinsic
+// node Call against constant integer CC using comparison code Cond.
+// Opcode is the opcode of the SystemZISD operation for the intrinsic
+// and CCValid is the set of possible condition-code results.
+static Comparison getIntrinsicCmp(SelectionDAG &DAG, unsigned Opcode,
+                                  SDValue Call, unsigned CCValid, uint64_t CC,
+                                  ISD::CondCode Cond) {
+  Comparison C(Call, SDValue());
+  C.Opcode = Opcode;
+  C.CCValid = CCValid;
+  if (Cond == ISD::SETEQ)
+    // bit 3 for CC==0, bit 0 for CC==3, always false for CC>3.
+    C.CCMask = CC < 4 ? 1 << (3 - CC) : 0;
+  else if (Cond == ISD::SETNE)
+    // ...and the inverse of that.
+    C.CCMask = CC < 4 ? ~(1 << (3 - CC)) : -1;
+  else if (Cond == ISD::SETLT || Cond == ISD::SETULT)
+    // bits above bit 3 for CC==0 (always false), bits above bit 0 for CC==3,
+    // always true for CC>3.
+    C.CCMask = CC < 4 ? -1 << (4 - CC) : -1;
+  else if (Cond == ISD::SETGE || Cond == ISD::SETUGE)
+    // ...and the inverse of that.
+    C.CCMask = CC < 4 ? ~(-1 << (4 - CC)) : 0;
+  else if (Cond == ISD::SETLE || Cond == ISD::SETULE)
+    // bit 3 and above for CC==0, bit 0 and above for CC==3 (always true),
+    // always true for CC>3.
+    C.CCMask = CC < 4 ? -1 << (3 - CC) : -1;
+  else if (Cond == ISD::SETGT || Cond == ISD::SETUGT)
+    // ...and the inverse of that.
+    C.CCMask = CC < 4 ? ~(-1 << (3 - CC)) : 0;
+  else
+    llvm_unreachable("Unexpected integer comparison type");
+  C.CCMask &= CCValid;
+  return C;
+}
+
 // Decide how to implement a comparison of type Cond between CmpOp0 with CmpOp1.
 static Comparison getCmp(SelectionDAG &DAG, SDValue CmpOp0, SDValue CmpOp1,
                          ISD::CondCode Cond) {
+  if (CmpOp1.getOpcode() == ISD::Constant) {
+    uint64_t Constant = cast<ConstantSDNode>(CmpOp1)->getZExtValue();
+    unsigned Opcode, CCValid;
+    if (CmpOp0.getOpcode() == ISD::INTRINSIC_W_CHAIN &&
+        CmpOp0.getResNo() == 0 && CmpOp0->hasNUsesOfValue(1, 0) &&
+        isIntrinsicWithCCAndChain(CmpOp0, Opcode, CCValid))
+      return getIntrinsicCmp(DAG, Opcode, CmpOp0, CCValid, Constant, Cond);
+  }
   Comparison C(CmpOp0, CmpOp1);
   C.CCMask = CCMaskForCondCode(Cond);
   if (C.Op0.getValueType().isFloatingPoint()) {
@@ -1632,6 +1727,17 @@ static Comparison getCmp(SelectionDAG &D
 
 // Emit the comparison instruction described by C.
 static SDValue emitCmp(SelectionDAG &DAG, SDLoc DL, Comparison &C) {
+  if (!C.Op1.getNode()) {
+    SDValue Op;
+    switch (C.Op0.getOpcode()) {
+    case ISD::INTRINSIC_W_CHAIN:
+      Op = emitIntrinsicWithChainAndGlue(DAG, C.Op0, C.Opcode);
+      break;
+    default:
+      llvm_unreachable("Invalid comparison operands");
+    }
+    return SDValue(Op.getNode(), Op->getNumValues() - 1);
+  }
   if (C.Opcode == SystemZISD::ICMP)
     return DAG.getNode(SystemZISD::ICMP, DL, MVT::Glue, C.Op0, C.Op1,
                        DAG.getConstant(C.ICmpType, MVT::i32));
@@ -1713,7 +1819,6 @@ SDValue SystemZTargetLowering::lowerSETC
 }
 
 SDValue SystemZTargetLowering::lowerBR_CC(SDValue Op, SelectionDAG &DAG) const {
-  SDValue Chain    = Op.getOperand(0);
   ISD::CondCode CC = cast<CondCodeSDNode>(Op.getOperand(1))->get();
   SDValue CmpOp0   = Op.getOperand(2);
   SDValue CmpOp1   = Op.getOperand(3);
@@ -1723,7 +1828,7 @@ SDValue SystemZTargetLowering::lowerBR_C
   Comparison C(getCmp(DAG, CmpOp0, CmpOp1, CC));
   SDValue Glue = emitCmp(DAG, DL, C);
   return DAG.getNode(SystemZISD::BR_CCMASK, DL, Op.getValueType(),
-                     Chain, DAG.getConstant(C.CCValid, MVT::i32),
+                     Op.getOperand(0), DAG.getConstant(C.CCValid, MVT::i32),
                      DAG.getConstant(C.CCMask, MVT::i32), Dest, Glue);
 }
 
@@ -2561,6 +2666,30 @@ SDValue SystemZTargetLowering::lowerPREF
                                  Node->getMemoryVT(), Node->getMemOperand());
 }
 
+// Return an i32 that contains the value of CC immediately after After,
+// whose final operand must be MVT::Glue.
+static SDValue getCCResult(SelectionDAG &DAG, SDNode *After) {
+  SDValue Glue = SDValue(After, After->getNumValues() - 1);
+  SDValue IPM = DAG.getNode(SystemZISD::IPM, SDLoc(After), MVT::i32, Glue);
+  return DAG.getNode(ISD::SRL, SDLoc(After), MVT::i32, IPM,
+                     DAG.getConstant(SystemZ::IPM_CC, MVT::i32));
+}
+
+SDValue
+SystemZTargetLowering::lowerINTRINSIC_W_CHAIN(SDValue Op,
+                                              SelectionDAG &DAG) const {
+  unsigned Opcode, CCValid;
+  if (isIntrinsicWithCCAndChain(Op, Opcode, CCValid)) {
+    assert(Op->getNumValues() == 2 && "Expected only CC result and chain");
+    SDValue Glued = emitIntrinsicWithChainAndGlue(DAG, Op, Opcode);
+    SDValue CC = getCCResult(DAG, Glued.getNode());
+    DAG.ReplaceAllUsesOfValueWith(SDValue(Op.getNode(), 0), CC);
+    return SDValue();
+  }
+
+  return SDValue();
+}
+
 SDValue SystemZTargetLowering::LowerOperation(SDValue Op,
                                               SelectionDAG &DAG) const {
   switch (Op.getOpcode()) {
@@ -2634,6 +2763,8 @@ SDValue SystemZTargetLowering::LowerOper
     return lowerSTACKRESTORE(Op, DAG);
   case ISD::PREFETCH:
     return lowerPREFETCH(Op, DAG);
+  case ISD::INTRINSIC_W_CHAIN:
+    return lowerINTRINSIC_W_CHAIN(Op, DAG);
   default:
     llvm_unreachable("Unexpected node to lower");
   }
@@ -2674,6 +2805,9 @@ const char *SystemZTargetLowering::getTa
     OPCODE(SEARCH_STRING);
     OPCODE(IPM);
     OPCODE(SERIALIZE);
+    OPCODE(TBEGIN);
+    OPCODE(TBEGIN_NOFLOAT);
+    OPCODE(TEND);
     OPCODE(ATOMIC_SWAPW);
     OPCODE(ATOMIC_LOADW_ADD);
     OPCODE(ATOMIC_LOADW_SUB);
@@ -3501,6 +3635,50 @@ SystemZTargetLowering::emitStringWrapper
   return DoneMBB;
 }
 
+// Update TBEGIN instruction with final opcode and register clobbers.
+MachineBasicBlock *
+SystemZTargetLowering::emitTransactionBegin(MachineInstr *MI,
+                                            MachineBasicBlock *MBB,
+                                            unsigned Opcode,
+                                            bool NoFloat) const {
+  MachineFunction &MF = *MBB->getParent();
+  const TargetFrameLowering *TFI = Subtarget.getFrameLowering();
+  const SystemZInstrInfo *TII = Subtarget.getInstrInfo();
+
+  // Update opcode.
+  MI->setDesc(TII->get(Opcode));
+
+  // We cannot handle a TBEGIN that clobbers the stack or frame pointer.
+  // Make sure to add the corresponding GRSM bits if they are missing.
+  uint64_t Control = MI->getOperand(2).getImm();
+  static const unsigned GPRControlBit[16] = {
+    0x8000, 0x8000, 0x4000, 0x4000, 0x2000, 0x2000, 0x1000, 0x1000,
+    0x0800, 0x0800, 0x0400, 0x0400, 0x0200, 0x0200, 0x0100, 0x0100
+  };
+  Control |= GPRControlBit[15];
+  if (TFI->hasFP(MF))
+    Control |= GPRControlBit[11];
+  MI->getOperand(2).setImm(Control);
+
+  // Add GPR clobbers.
+  for (int I = 0; I < 16; I++) {
+    if ((Control & GPRControlBit[I]) == 0) {
+      unsigned Reg = SystemZMC::GR64Regs[I];
+      MI->addOperand(MachineOperand::CreateReg(Reg, true, true));
+    }
+  }
+
+  // Add FPR clobbers.
+  if (!NoFloat && (Control & 4) != 0) {
+    for (int I = 0; I < 16; I++) {
+      unsigned Reg = SystemZMC::FP64Regs[I];
+      MI->addOperand(MachineOperand::CreateReg(Reg, true, true));
+    }
+  }
+
+  return MBB;
+}
+
 MachineBasicBlock *SystemZTargetLowering::
 EmitInstrWithCustomInserter(MachineInstr *MI, MachineBasicBlock *MBB) const {
   switch (MI->getOpcode()) {
@@ -3742,6 +3920,12 @@ EmitInstrWithCustomInserter(MachineInstr
     return emitStringWrapper(MI, MBB, SystemZ::MVST);
   case SystemZ::SRSTLoop:
     return emitStringWrapper(MI, MBB, SystemZ::SRST);
+  case SystemZ::TBEGIN:
+    return emitTransactionBegin(MI, MBB, SystemZ::TBEGIN, false);
+  case SystemZ::TBEGIN_nofloat:
+    return emitTransactionBegin(MI, MBB, SystemZ::TBEGIN, true);
+  case SystemZ::TBEGINC:
+    return emitTransactionBegin(MI, MBB, SystemZ::TBEGINC, true);
   default:
     llvm_unreachable("Unexpected instr type to insert");
   }
Index: llvm-head/test/CodeGen/SystemZ/htm-intrinsics.ll
===================================================================
--- /dev/null
+++ llvm-head/test/CodeGen/SystemZ/htm-intrinsics.ll
@@ -0,0 +1,352 @@
+; Test transactional-execution intrinsics.
+;
+; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=zEC12 | FileCheck %s
+
+declare i32 @llvm.s390.tbegin(i8 *, i32)
+declare i32 @llvm.s390.tbegin.nofloat(i8 *, i32)
+declare void @llvm.s390.tbeginc(i8 *, i32)
+declare i32 @llvm.s390.tend()
+declare void @llvm.s390.tabort(i64)
+declare void @llvm.s390.ntstg(i64, i64 *)
+declare i32 @llvm.s390.etnd()
+declare void @llvm.s390.ppa.txassist(i32)
+
+; TBEGIN.
+define void @test_tbegin() {
+; CHECK-LABEL: test_tbegin:
+; CHECK-NOT: stmg
+; CHECK: std %f8,
+; CHECK: std %f9,
+; CHECK: std %f10,
+; CHECK: std %f11,
+; CHECK: std %f12,
+; CHECK: std %f13,
+; CHECK: std %f14,
+; CHECK: std %f15,
+; CHECK: tbegin 0, 65292
+; CHECK: ld %f8,
+; CHECK: ld %f9,
+; CHECK: ld %f10,
+; CHECK: ld %f11,
+; CHECK: ld %f12,
+; CHECK: ld %f13,
+; CHECK: ld %f14,
+; CHECK: ld %f15,
+; CHECK: br %r14
+  call i32 @llvm.s390.tbegin(i8 *null, i32 65292)
+  ret void
+}
+
+; TBEGIN (nofloat).
+define void @test_tbegin_nofloat1() {
+; CHECK-LABEL: test_tbegin_nofloat1:
+; CHECK-NOT: stmg
+; CHECK-NOT: std
+; CHECK: tbegin 0, 65292
+; CHECK: br %r14
+  call i32 @llvm.s390.tbegin.nofloat(i8 *null, i32 65292)
+  ret void
+}
+
+; TBEGIN (nofloat) with integer CC return value.
+define i32 @test_tbegin_nofloat2() {
+; CHECK-LABEL: test_tbegin_nofloat2:
+; CHECK-NOT: stmg
+; CHECK-NOT: std
+; CHECK: tbegin 0, 65292
+; CHECK: ipm %r2
+; CHECK: srl %r2, 28
+; CHECK: br %r14
+  %res = call i32 @llvm.s390.tbegin.nofloat(i8 *null, i32 65292)
+  ret i32 %res
+}
+
+; TBEGIN (nofloat) with implicit CC check.
+define void @test_tbegin_nofloat3(i32 *%ptr) {
+; CHECK-LABEL: test_tbegin_nofloat3:
+; CHECK-NOT: stmg
+; CHECK-NOT: std
+; CHECK: tbegin 0, 65292
+; CHECK: jnh  {{\.L*}}
+; CHECK: mvhi 0(%r2), 0
+; CHECK: br %r14
+  %res = call i32 @llvm.s390.tbegin.nofloat(i8 *null, i32 65292)
+  %cmp = icmp eq i32 %res, 2
+  br i1 %cmp, label %if.then, label %if.end
+
+if.then:                                          ; preds = %entry
+  store i32 0, i32* %ptr, align 4
+  br label %if.end
+
+if.end:                                           ; preds = %if.then, %entry
+  ret void
+}
+
+; TBEGIN (nofloat) with dual CC use.
+define i32 @test_tbegin_nofloat4(i32 %pad, i32 *%ptr) {
+; CHECK-LABEL: test_tbegin_nofloat4:
+; CHECK-NOT: stmg
+; CHECK-NOT: std
+; CHECK: tbegin 0, 65292
+; CHECK: ipm %r2
+; CHECK: srl %r2, 28
+; CHECK: cijlh %r2, 2,  {{\.L*}}
+; CHECK: mvhi 0(%r3), 0
+; CHECK: br %r14
+  %res = call i32 @llvm.s390.tbegin.nofloat(i8 *null, i32 65292)
+  %cmp = icmp eq i32 %res, 2
+  br i1 %cmp, label %if.then, label %if.end
+
+if.then:                                          ; preds = %entry
+  store i32 0, i32* %ptr, align 4
+  br label %if.end
+
+if.end:                                           ; preds = %if.then, %entry
+  ret i32 %res
+}
+
+; TBEGIN (nofloat) with register.
+define void @test_tbegin_nofloat5(i8 *%ptr) {
+; CHECK-LABEL: test_tbegin_nofloat5:
+; CHECK-NOT: stmg
+; CHECK-NOT: std
+; CHECK: tbegin 0(%r2), 65292
+; CHECK: br %r14
+  call i32 @llvm.s390.tbegin.nofloat(i8 *%ptr, i32 65292)
+  ret void
+}
+
+; TBEGIN (nofloat) with GRSM 0x0f00.
+define void @test_tbegin_nofloat6() {
+; CHECK-LABEL: test_tbegin_nofloat6:
+; CHECK: stmg %r6, %r15,
+; CHECK-NOT: std
+; CHECK: tbegin 0, 3840
+; CHECK: br %r14
+  call i32 @llvm.s390.tbegin.nofloat(i8 *null, i32 3840)
+  ret void
+}
+
+; TBEGIN (nofloat) with GRSM 0xf100.
+define void @test_tbegin_nofloat7() {
+; CHECK-LABEL: test_tbegin_nofloat7:
+; CHECK: stmg %r8, %r15,
+; CHECK-NOT: std
+; CHECK: tbegin 0, 61696
+; CHECK: br %r14
+  call i32 @llvm.s390.tbegin.nofloat(i8 *null, i32 61696)
+  ret void
+}
+
+; TBEGIN (nofloat) with GRSM 0xfe00 -- stack pointer added automatically.
+define void @test_tbegin_nofloat8() {
+; CHECK-LABEL: test_tbegin_nofloat8:
+; CHECK-NOT: stmg
+; CHECK-NOT: std
+; CHECK: tbegin 0, 65280
+; CHECK: br %r14
+  call i32 @llvm.s390.tbegin.nofloat(i8 *null, i32 65024)
+  ret void
+}
+
+; TBEGIN (nofloat) with GRSM 0xfb00 -- no frame pointer needed.
+define void @test_tbegin_nofloat9() {
+; CHECK-LABEL: test_tbegin_nofloat9:
+; CHECK: stmg %r10, %r15,
+; CHECK-NOT: std
+; CHECK: tbegin 0, 64256
+; CHECK: br %r14
+  call i32 @llvm.s390.tbegin.nofloat(i8 *null, i32 64256)
+  ret void
+}
+
+; TBEGIN (nofloat) with GRSM 0xfb00 -- frame pointer added automatically.
+define void @test_tbegin_nofloat10(i64 %n) {
+; CHECK-LABEL: test_tbegin_nofloat10:
+; CHECK: stmg %r11, %r15,
+; CHECK-NOT: std
+; CHECK: tbegin 0, 65280
+; CHECK: br %r14
+  %buf = alloca i8, i64 %n
+  call i32 @llvm.s390.tbegin.nofloat(i8 *null, i32 64256)
+  ret void
+}
+
+; TBEGINC.
+define void @test_tbeginc() {
+; CHECK-LABEL: test_tbeginc:
+; CHECK-NOT: stmg
+; CHECK-NOT: std
+; CHECK: tbeginc 0, 65288
+; CHECK: br %r14
+  call void @llvm.s390.tbeginc(i8 *null, i32 65288)
+  ret void
+}
+
+; TEND with integer CC return value.
+define i32 @test_tend1() {
+; CHECK-LABEL: test_tend1:
+; CHECK: tend
+; CHECK: ipm %r2
+; CHECK: srl %r2, 28
+; CHECK: br %r14
+  %res = call i32 @llvm.s390.tend()
+  ret i32 %res
+}
+
+; TEND with implicit CC check.
+define void @test_tend3(i32 *%ptr) {
+; CHECK-LABEL: test_tend3:
+; CHECK: tend
+; CHECK: je  {{\.L*}}
+; CHECK: mvhi 0(%r2), 0
+; CHECK: br %r14
+  %res = call i32 @llvm.s390.tend()
+  %cmp = icmp eq i32 %res, 2
+  br i1 %cmp, label %if.then, label %if.end
+
+if.then:                                          ; preds = %entry
+  store i32 0, i32* %ptr, align 4
+  br label %if.end
+
+if.end:                                           ; preds = %if.then, %entry
+  ret void
+}
+
+; TEND with dual CC use.
+define i32 @test_tend2(i32 %pad, i32 *%ptr) {
+; CHECK-LABEL: test_tend2:
+; CHECK: tend
+; CHECK: ipm %r2
+; CHECK: srl %r2, 28
+; CHECK: cijlh %r2, 2,  {{\.L*}}
+; CHECK: mvhi 0(%r3), 0
+; CHECK: br %r14
+  %res = call i32 @llvm.s390.tend()
+  %cmp = icmp eq i32 %res, 2
+  br i1 %cmp, label %if.then, label %if.end
+
+if.then:                                          ; preds = %entry
+  store i32 0, i32* %ptr, align 4
+  br label %if.end
+
+if.end:                                           ; preds = %if.then, %entry
+  ret i32 %res
+}
+
+; TABORT with register only.
+define void @test_tabort1(i64 %val) {
+; CHECK-LABEL: test_tabort1:
+; CHECK: tabort 0(%r2)
+; CHECK: br %r14
+  call void @llvm.s390.tabort(i64 %val)
+  ret void
+}
+
+; TABORT with immediate only.
+define void @test_tabort2(i64 %val) {
+; CHECK-LABEL: test_tabort2:
+; CHECK: tabort 1234
+; CHECK: br %r14
+  call void @llvm.s390.tabort(i64 1234)
+  ret void
+}
+
+; TABORT with register + immediate.
+define void @test_tabort3(i64 %val) {
+; CHECK-LABEL: test_tabort3:
+; CHECK: tabort 1234(%r2)
+; CHECK: br %r14
+  %sum = add i64 %val, 1234
+  call void @llvm.s390.tabort(i64 %sum)
+  ret void
+}
+
+; TABORT with out-of-range immediate.
+define void @test_tabort4(i64 %val) {
+; CHECK-LABEL: test_tabort4:
+; CHECK: tabort 0({{%r[1-5]}})
+; CHECK: br %r14
+  call void @llvm.s390.tabort(i64 4096)
+  ret void
+}
+
+; NTSTG with base pointer only.
+define void @test_ntstg1(i64 *%ptr, i64 %val) {
+; CHECK-LABEL: test_ntstg1:
+; CHECK: ntstg %r3, 0(%r2)
+; CHECK: br %r14
+  call void @llvm.s390.ntstg(i64 %val, i64 *%ptr)
+  ret void
+}
+
+; NTSTG with base and index.
+; Check that VSTL doesn't allow an index.
+define void @test_ntstg2(i64 *%base, i64 %index, i64 %val) {
+; CHECK-LABEL: test_ntstg2:
+; CHECK: sllg [[REG:%r[1-5]]], %r3, 3
+; CHECK: ntstg %r4, 0([[REG]],%r2)
+; CHECK: br %r14
+  %ptr = getelementptr i64, i64 *%base, i64 %index
+  call void @llvm.s390.ntstg(i64 %val, i64 *%ptr)
+  ret void
+}
+
+; NTSTG with the highest in-range displacement.
+define void @test_ntstg3(i64 *%base, i64 %val) {
+; CHECK-LABEL: test_ntstg3:
+; CHECK: ntstg %r3, 524280(%r2)
+; CHECK: br %r14
+  %ptr = getelementptr i64, i64 *%base, i64 65535
+  call void @llvm.s390.ntstg(i64 %val, i64 *%ptr)
+  ret void
+}
+
+; NTSTG with an out-of-range positive displacement.
+define void @test_ntstg4(i64 *%base, i64 %val) {
+; CHECK-LABEL: test_ntstg4:
+; CHECK: ntstg %r3, 0({{%r[1-5]}})
+; CHECK: br %r14
+  %ptr = getelementptr i64, i64 *%base, i64 65536
+  call void @llvm.s390.ntstg(i64 %val, i64 *%ptr)
+  ret void
+}
+
+; NTSTG with the lowest in-range displacement.
+define void @test_ntstg5(i64 *%base, i64 %val) {
+; CHECK-LABEL: test_ntstg5:
+; CHECK: ntstg %r3, -524288(%r2)
+; CHECK: br %r14
+  %ptr = getelementptr i64, i64 *%base, i64 -65536
+  call void @llvm.s390.ntstg(i64 %val, i64 *%ptr)
+  ret void
+}
+
+; NTSTG with an out-of-range negative displacement.
+define void @test_ntstg6(i64 *%base, i64 %val) {
+; CHECK-LABEL: test_ntstg6:
+; CHECK: ntstg %r3, 0({{%r[1-5]}})
+; CHECK: br %r14
+  %ptr = getelementptr i64, i64 *%base, i64 -65537
+  call void @llvm.s390.ntstg(i64 %val, i64 *%ptr)
+  ret void
+}
+
+; ETND.
+define i32 @test_etnd() {
+; CHECK-LABEL: test_etnd:
+; CHECK: etnd %r2
+; CHECK: br %r14
+  %res = call i32 @llvm.s390.etnd()
+  ret i32 %res
+}
+
+; PPA (Transaction-Abort Assist)
+define void @test_ppa_txassist(i32 %val) {
+; CHECK-LABEL: test_ppa_txassist:
+; CHECK: ppa %r2, 0, 1
+; CHECK: br %r14
+  call void @llvm.s390.ppa.txassist(i32 %val)
+  ret void
+}
+
Index: llvm-head/test/MC/SystemZ/insn-bad-zEC12.s
===================================================================
--- llvm-head.orig/test/MC/SystemZ/insn-bad-zEC12.s
+++ llvm-head/test/MC/SystemZ/insn-bad-zEC12.s
@@ -3,6 +3,22 @@
 # RUN: FileCheck < %t %s
 
 #CHECK: error: invalid operand
+#CHECK: ntstg	%r0, -524289
+#CHECK: error: invalid operand
+#CHECK: ntstg	%r0, 524288
+
+	ntstg	%r0, -524289
+	ntstg	%r0, 524288
+
+#CHECK: error: invalid operand
+#CHECK: ppa	%r0, %r0, -1
+#CHECK: error: invalid operand
+#CHECK: ppa	%r0, %r0, 16
+
+	ppa	%r0, %r0, -1
+	ppa	%r0, %r0, 16
+
+#CHECK: error: invalid operand
 #CHECK: risbgn	%r0,%r0,0,0,-1
 #CHECK: error: invalid operand
 #CHECK: risbgn	%r0,%r0,0,0,64
@@ -22,3 +38,47 @@
 	risbgn	%r0,%r0,-1,0,0
 	risbgn	%r0,%r0,256,0,0
 
+#CHECK: error: invalid operand
+#CHECK: tabort	-1
+#CHECK: error: invalid operand
+#CHECK: tabort	4096
+#CHECK: error: invalid use of indexed addressing
+#CHECK: tabort	0(%r1,%r2)
+
+	tabort	-1
+	tabort	4096
+	tabort	0(%r1,%r2)
+
+#CHECK: error: invalid operand
+#CHECK: tbegin	-1, 0
+#CHECK: error: invalid operand
+#CHECK: tbegin	4096, 0
+#CHECK: error: invalid use of indexed addressing
+#CHECK: tbegin	0(%r1,%r2), 0
+#CHECK: error: invalid operand
+#CHECK: tbegin	0, -1
+#CHECK: error: invalid operand
+#CHECK: tbegin	0, 65536
+
+	tbegin	-1, 0
+	tbegin	4096, 0
+	tbegin	0(%r1,%r2), 0
+	tbegin	0, -1
+	tbegin	0, 65536
+
+#CHECK: error: invalid operand
+#CHECK: tbeginc	-1, 0
+#CHECK: error: invalid operand
+#CHECK: tbeginc	4096, 0
+#CHECK: error: invalid use of indexed addressing
+#CHECK: tbeginc	0(%r1,%r2), 0
+#CHECK: error: invalid operand
+#CHECK: tbeginc	0, -1
+#CHECK: error: invalid operand
+#CHECK: tbeginc	0, 65536
+
+	tbeginc	-1, 0
+	tbeginc	4096, 0
+	tbeginc	0(%r1,%r2), 0
+	tbeginc	0, -1
+	tbeginc	0, 65536
Index: llvm-head/test/MC/SystemZ/insn-good-zEC12.s
===================================================================
--- llvm-head.orig/test/MC/SystemZ/insn-good-zEC12.s
+++ llvm-head/test/MC/SystemZ/insn-good-zEC12.s
@@ -1,6 +1,48 @@
 # For zEC12 and above.
 # RUN: llvm-mc -triple s390x-linux-gnu -mcpu=zEC12 -show-encoding %s | FileCheck %s
 
+#CHECK: etnd	%r0                     # encoding: [0xb2,0xec,0x00,0x00]
+#CHECK: etnd	%r15                    # encoding: [0xb2,0xec,0x00,0xf0]
+#CHECK: etnd	%r7                     # encoding: [0xb2,0xec,0x00,0x70]
+
+	etnd	%r0
+	etnd	%r15
+	etnd	%r7
+
+#CHECK: ntstg	%r0, -524288            # encoding: [0xe3,0x00,0x00,0x00,0x80,0x25]
+#CHECK: ntstg	%r0, -1                 # encoding: [0xe3,0x00,0x0f,0xff,0xff,0x25]
+#CHECK: ntstg	%r0, 0                  # encoding: [0xe3,0x00,0x00,0x00,0x00,0x25]
+#CHECK: ntstg	%r0, 1                  # encoding: [0xe3,0x00,0x00,0x01,0x00,0x25]
+#CHECK: ntstg	%r0, 524287             # encoding: [0xe3,0x00,0x0f,0xff,0x7f,0x25]
+#CHECK: ntstg	%r0, 0(%r1)             # encoding: [0xe3,0x00,0x10,0x00,0x00,0x25]
+#CHECK: ntstg	%r0, 0(%r15)            # encoding: [0xe3,0x00,0xf0,0x00,0x00,0x25]
+#CHECK: ntstg	%r0, 524287(%r1,%r15)   # encoding: [0xe3,0x01,0xff,0xff,0x7f,0x25]
+#CHECK: ntstg	%r0, 524287(%r15,%r1)   # encoding: [0xe3,0x0f,0x1f,0xff,0x7f,0x25]
+#CHECK: ntstg	%r15, 0                 # encoding: [0xe3,0xf0,0x00,0x00,0x00,0x25]
+
+	ntstg	%r0, -524288
+	ntstg	%r0, -1
+	ntstg	%r0, 0
+	ntstg	%r0, 1
+	ntstg	%r0, 524287
+	ntstg	%r0, 0(%r1)
+	ntstg	%r0, 0(%r15)
+	ntstg	%r0, 524287(%r1,%r15)
+	ntstg	%r0, 524287(%r15,%r1)
+	ntstg	%r15, 0
+
+#CHECK: ppa	%r0, %r0, 0             # encoding: [0xb2,0xe8,0x00,0x00]
+#CHECK: ppa	%r0, %r0, 15            # encoding: [0xb2,0xe8,0xf0,0x00]
+#CHECK: ppa	%r0, %r15, 0            # encoding: [0xb2,0xe8,0x00,0x0f]
+#CHECK: ppa	%r4, %r6, 7             # encoding: [0xb2,0xe8,0x70,0x46]
+#CHECK: ppa	%r15, %r0, 0            # encoding: [0xb2,0xe8,0x00,0xf0]
+
+	ppa	%r0, %r0, 0
+	ppa	%r0, %r0, 15
+	ppa	%r0, %r15, 0
+	ppa	%r4, %r6, 7
+	ppa	%r15, %r0, 0
+
 #CHECK: risbgn	%r0, %r0, 0, 0, 0       # encoding: [0xec,0x00,0x00,0x00,0x00,0x59]
 #CHECK: risbgn	%r0, %r0, 0, 0, 63      # encoding: [0xec,0x00,0x00,0x00,0x3f,0x59]
 #CHECK: risbgn	%r0, %r0, 0, 255, 0     # encoding: [0xec,0x00,0x00,0xff,0x00,0x59]
@@ -17,3 +59,68 @@
 	risbgn	%r15,%r0,0,0,0
 	risbgn	%r4,%r5,6,7,8
 
+#CHECK: tabort	0                       # encoding: [0xb2,0xfc,0x00,0x00]
+#CHECK: tabort	0(%r1)                  # encoding: [0xb2,0xfc,0x10,0x00]
+#CHECK: tabort	0(%r15)                 # encoding: [0xb2,0xfc,0xf0,0x00]
+#CHECK: tabort	4095                    # encoding: [0xb2,0xfc,0x0f,0xff]
+#CHECK: tabort	4095(%r1)               # encoding: [0xb2,0xfc,0x1f,0xff]
+#CHECK: tabort	4095(%r15)              # encoding: [0xb2,0xfc,0xff,0xff]
+
+	tabort	0
+	tabort	0(%r1)
+	tabort	0(%r15)
+	tabort	4095
+	tabort	4095(%r1)
+	tabort	4095(%r15)
+
+#CHECK: tbegin	0, 0                    # encoding: [0xe5,0x60,0x00,0x00,0x00,0x00]
+#CHECK: tbegin	4095, 0                 # encoding: [0xe5,0x60,0x0f,0xff,0x00,0x00]
+#CHECK: tbegin	0, 0                    # encoding: [0xe5,0x60,0x00,0x00,0x00,0x00]
+#CHECK: tbegin	0, 1                    # encoding: [0xe5,0x60,0x00,0x00,0x00,0x01]
+#CHECK: tbegin	0, 32767                # encoding: [0xe5,0x60,0x00,0x00,0x7f,0xff]
+#CHECK: tbegin	0, 32768                # encoding: [0xe5,0x60,0x00,0x00,0x80,0x00]
+#CHECK: tbegin	0, 65535                # encoding: [0xe5,0x60,0x00,0x00,0xff,0xff]
+#CHECK: tbegin	0(%r1), 42              # encoding: [0xe5,0x60,0x10,0x00,0x00,0x2a]
+#CHECK: tbegin	0(%r15), 42             # encoding: [0xe5,0x60,0xf0,0x00,0x00,0x2a]
+#CHECK: tbegin	4095(%r1), 42           # encoding: [0xe5,0x60,0x1f,0xff,0x00,0x2a]
+#CHECK: tbegin	4095(%r15), 42          # encoding: [0xe5,0x60,0xff,0xff,0x00,0x2a]
+
+	tbegin	0, 0
+	tbegin	4095, 0
+	tbegin	0, 0
+	tbegin	0, 1
+	tbegin	0, 32767
+	tbegin	0, 32768
+	tbegin	0, 65535
+	tbegin	0(%r1), 42
+	tbegin	0(%r15), 42
+	tbegin	4095(%r1), 42
+	tbegin	4095(%r15), 42
+
+#CHECK: tbeginc	0, 0                    # encoding: [0xe5,0x61,0x00,0x00,0x00,0x00]
+#CHECK: tbeginc	4095, 0                 # encoding: [0xe5,0x61,0x0f,0xff,0x00,0x00]
+#CHECK: tbeginc	0, 0                    # encoding: [0xe5,0x61,0x00,0x00,0x00,0x00]
+#CHECK: tbeginc	0, 1                    # encoding: [0xe5,0x61,0x00,0x00,0x00,0x01]
+#CHECK: tbeginc	0, 32767                # encoding: [0xe5,0x61,0x00,0x00,0x7f,0xff]
+#CHECK: tbeginc	0, 32768                # encoding: [0xe5,0x61,0x00,0x00,0x80,0x00]
+#CHECK: tbeginc	0, 65535                # encoding: [0xe5,0x61,0x00,0x00,0xff,0xff]
+#CHECK: tbeginc	0(%r1), 42              # encoding: [0xe5,0x61,0x10,0x00,0x00,0x2a]
+#CHECK: tbeginc	0(%r15), 42             # encoding: [0xe5,0x61,0xf0,0x00,0x00,0x2a]
+#CHECK: tbeginc	4095(%r1), 42           # encoding: [0xe5,0x61,0x1f,0xff,0x00,0x2a]
+#CHECK: tbeginc	4095(%r15), 42          # encoding: [0xe5,0x61,0xff,0xff,0x00,0x2a]
+
+	tbeginc	0, 0
+	tbeginc	4095, 0
+	tbeginc	0, 0
+	tbeginc	0, 1
+	tbeginc	0, 32767
+	tbeginc	0, 32768
+	tbeginc	0, 65535
+	tbeginc	0(%r1), 42
+	tbeginc	0(%r15), 42
+	tbeginc	4095(%r1), 42
+	tbeginc	4095(%r15), 42
+
+#CHECK: tend                            # encoding: [0xb2,0xf8,0x00,0x00]
+
+	tend
Index: llvm-head/test/MC/SystemZ/insn-bad-z196.s
===================================================================
--- llvm-head.orig/test/MC/SystemZ/insn-bad-z196.s
+++ llvm-head/test/MC/SystemZ/insn-bad-z196.s
@@ -244,6 +244,11 @@
 	cxlgbr	%f0, 16, %r0, 0
 	cxlgbr	%f2, 0, %r0, 0
 
+#CHECK: error: {{(instruction requires: transactional-execution)?}}
+#CHECK: etnd	%r7
+
+	etnd	%r7
+
 #CHECK: error: invalid operand
 #CHECK: fidbra	%f0, 0, %f0, -1
 #CHECK: error: invalid operand
@@ -546,6 +551,16 @@
 	locr	%r0,%r0,-1
 	locr	%r0,%r0,16
 
+#CHECK: error: {{(instruction requires: transactional-execution)?}}
+#CHECK: ntstg	%r0, 524287(%r1,%r15)
+
+	ntstg	%r0, 524287(%r1,%r15)
+
+#CHECK: error: {{(instruction requires: processor-assist)?}}
+#CHECK: ppa	%r4, %r6, 7
+
+	ppa	%r4, %r6, 7
+
 #CHECK: error: {{(instruction requires: miscellaneous-extensions)?}}
 #CHECK: risbgn	%r1, %r2, 0, 0, 0
 
@@ -690,3 +705,24 @@
 	stocg	%r0,-524289,1
 	stocg	%r0,524288,1
 	stocg	%r0,0(%r1,%r2),1
+
+#CHECK: error: {{(instruction requires: transactional-execution)?}}
+#CHECK: tabort	4095(%r1)
+
+	tabort	4095(%r1)
+
+#CHECK: error: {{(instruction requires: transactional-execution)?}}
+#CHECK: tbegin	4095(%r1), 42
+
+	tbegin	4095(%r1), 42
+
+#CHECK: error: {{(instruction requires: transactional-execution)?}}
+#CHECK: tbeginc	4095(%r1), 42
+
+	tbeginc	4095(%r1), 42
+
+#CHECK: error: {{(instruction requires: transactional-execution)?}}
+#CHECK: tend
+
+	tend
+
Index: llvm-head/test/MC/Disassembler/SystemZ/insns.txt
===================================================================
--- llvm-head.orig/test/MC/Disassembler/SystemZ/insns.txt
+++ llvm-head/test/MC/Disassembler/SystemZ/insns.txt
@@ -2503,6 +2503,15 @@
 # CHECK: ear %r15, %a15
 0xb2 0x4f 0x00 0xff
 
+# CHECK: etnd %r0
+0xb2 0xec 0x00 0x00
+
+# CHECK: etnd %r15
+0xb2 0xec 0x00 0xf0
+
+# CHECK: etnd %r7
+0xb2 0xec 0x00 0x70
+
 # CHECK: fidbr %f0, 0, %f0
 0xb3 0x5f 0x00 0x00
 
@@ -6034,6 +6043,36 @@
 # CHECK: ny %r15, 0
 0xe3 0xf0 0x00 0x00 0x00 0x54
 
+# CHECK: ntstg %r0, -524288
+0xe3 0x00 0x00 0x00 0x80 0x25
+
+# CHECK: ntstg %r0, -1
+0xe3 0x00 0x0f 0xff 0xff 0x25
+
+# CHECK: ntstg %r0, 0
+0xe3 0x00 0x00 0x00 0x00 0x25
+
+# CHECK: ntstg %r0, 1
+0xe3 0x00 0x00 0x01 0x00 0x25
+
+# CHECK: ntstg %r0, 524287
+0xe3 0x00 0x0f 0xff 0x7f 0x25
+
+# CHECK: ntstg %r0, 0(%r1)
+0xe3 0x00 0x10 0x00 0x00 0x25
+
+# CHECK: ntstg %r0, 0(%r15)
+0xe3 0x00 0xf0 0x00 0x00 0x25
+
+# CHECK: ntstg %r0, 524287(%r1,%r15)
+0xe3 0x01 0xff 0xff 0x7f 0x25
+
+# CHECK: ntstg %r0, 524287(%r15,%r1)
+0xe3 0x0f 0x1f 0xff 0x7f 0x25
+
+# CHECK: ntstg %r15, 0
+0xe3 0xf0 0x00 0x00 0x00 0x25
+
 # CHECK: oc 0(1), 0
 0xd6 0x00 0x00 0x00 0x00 0x00
 
@@ -6346,6 +6385,21 @@
 # CHECK: popcnt %r7, %r8
 0xb9 0xe1 0x00 0x78
 
+# CHECK: ppa %r0, %r0, 0
+0xb2 0xe8 0x00 0x00
+
+# CHECK: ppa %r0, %r0, 15
+0xb2 0xe8 0xf0 0x00
+
+# CHECK: ppa %r0, %r15, 0
+0xb2 0xe8 0x00 0x0f
+
+# CHECK: ppa %r4, %r6, 7
+0xb2 0xe8 0x70 0x46
+
+# CHECK: ppa %r15, %r0, 0
+0xb2 0xe8 0x00 0xf0
+
 # CHECK: risbg %r0, %r0, 0, 0, 0
 0xec 0x00 0x00 0x00 0x00 0x55
 
@@ -8062,6 +8116,93 @@
 # CHECK: sy %r15, 0
 0xe3 0xf0 0x00 0x00 0x00 0x5b
 
+# CHECK: tabort 0
+0xb2 0xfc 0x00 0x00
+
+# CHECK: tabort 0(%r1)
+0xb2 0xfc 0x10 0x00
+
+# CHECK: tabort 0(%r15)
+0xb2 0xfc 0xf0 0x00
+
+# CHECK: tabort 4095
+0xb2 0xfc 0x0f 0xff
+
+# CHECK: tabort 4095(%r1)
+0xb2 0xfc 0x1f 0xff
+
+# CHECK: tabort 4095(%r15)
+0xb2 0xfc 0xff 0xff
+
+# CHECK: tbegin 0, 0
+0xe5 0x60 0x00 0x00 0x00 0x00
+
+# CHECK: tbegin 4095, 0
+0xe5 0x60 0x0f 0xff 0x00 0x00
+
+# CHECK: tbegin 0, 0
+0xe5 0x60 0x00 0x00 0x00 0x00
+
+# CHECK: tbegin 0, 1
+0xe5 0x60 0x00 0x00 0x00 0x01
+
+# CHECK: tbegin 0, 32767
+0xe5 0x60 0x00 0x00 0x7f 0xff
+
+# CHECK: tbegin 0, 32768
+0xe5 0x60 0x00 0x00 0x80 0x00
+
+# CHECK: tbegin 0, 65535
+0xe5 0x60 0x00 0x00 0xff 0xff
+
+# CHECK: tbegin 0(%r1), 42
+0xe5 0x60 0x10 0x00 0x00 0x2a
+
+# CHECK: tbegin 0(%r15), 42
+0xe5 0x60 0xf0 0x00 0x00 0x2a
+
+# CHECK: tbegin 4095(%r1), 42
+0xe5 0x60 0x1f 0xff 0x00 0x2a
+
+# CHECK: tbegin 4095(%r15), 42
+0xe5 0x60 0xff 0xff 0x00 0x2a
+
+# CHECK: tbeginc 0, 0
+0xe5 0x61 0x00 0x00 0x00 0x00
+
+# CHECK: tbeginc 4095, 0
+0xe5 0x61 0x0f 0xff 0x00 0x00
+
+# CHECK: tbeginc 0, 0
+0xe5 0x61 0x00 0x00 0x00 0x00
+
+# CHECK: tbeginc 0, 1
+0xe5 0x61 0x00 0x00 0x00 0x01
+
+# CHECK: tbeginc 0, 32767
+0xe5 0x61 0x00 0x00 0x7f 0xff
+
+# CHECK: tbeginc 0, 32768
+0xe5 0x61 0x00 0x00 0x80 0x00
+
+# CHECK: tbeginc 0, 65535
+0xe5 0x61 0x00 0x00 0xff 0xff
+
+# CHECK: tbeginc 0(%r1), 42
+0xe5 0x61 0x10 0x00 0x00 0x2a
+
+# CHECK: tbeginc 0(%r15), 42
+0xe5 0x61 0xf0 0x00 0x00 0x2a
+
+# CHECK: tbeginc 4095(%r1), 42
+0xe5 0x61 0x1f 0xff 0x00 0x2a
+
+# CHECK: tbeginc 4095(%r15), 42
+0xe5 0x61 0xff 0xff 0x00 0x2a
+
+# CHECK: tend
+0xb2 0xf8 0x00 0x00
+
 # CHECK: tm 0, 0
 0x91 0x00 0x00 0x00
 

llvm-svn: 233803
2015-04-01 12:51:43 +00:00
Ulrich Weigand 371d10a4eb [SystemZ] Support RISBGN instruction on zEC12
So far, we do not yet support any instruction specific to zEC12.
Most of the facilities added with zEC12 are indeed not very useful
to compiler code generation, but there is one exception: the
miscellaneous-extensions facility provides the RISBGN instruction,
which is a variant of RISBG that does not set the condition code.

Add support for this facility, MC support for RISBGN, and CodeGen
support for prefering RISBGN over RISBG on zEC12, unless we can
actually make use of the condition code set by RISBG.

llvm-svn: 233690
2015-03-31 12:58:17 +00:00
Ulrich Weigand b401218ca2 [SystemZ] Use POPCNT instruction on z196
We already exploit a number of instructions specific to z196,
but not yet POPCNT.  Add support for the population-count
facility, MC support for the POPCNT instruction, CodeGen
support for using POPCNT, and implement the getPopcntSupport
TargetTransformInfo hook.

llvm-svn: 233689
2015-03-31 12:56:33 +00:00
Ulrich Weigand 1f6666a49c [SystemZ] Provide basic TargetTransformInfo implementation
This hooks up the TargetTransformInfo machinery for SystemZ,
and provides an implementation of getIntImmCost.

In addition, the patch adds the isLegalICmpImmediate and
isLegalAddImmediate TargetLowering overrides, and updates
a couple of test cases where we now generate slightly
better code.

llvm-svn: 233688
2015-03-31 12:52:27 +00:00
Ulrich Weigand b8d76fb7ca [SystemZ] Fix LLVM crash on unoptimized code
Compiling the following function with -O0 would crash, since LLVM would
hit an assertion in getTestUnderMaskCond:

  int test(unsigned long x)
  {
    return x >= 0 && x <= 15;
  }

Fixed by detecting the case in the caller of getTestUnderMaskCond.

llvm-svn: 233541
2015-03-30 13:46:59 +00:00
David Blaikie 41fe3a495d Change SystemZ large tests to use the existing long_tests property
(this is already used in Clang for a couple of tests)

Reviewers: uweigand

Differential Revision: http://reviews.llvm.org/D7965

llvm-svn: 230998
2015-03-02 19:34:11 +00:00
David Blaikie 2c302a8dfa Update SystemZ/Large test generators to handle new gep IR syntax
llvm-svn: 230810
2015-02-27 23:29:39 +00:00
David Blaikie d7e13b0eb2 Update SystemZ/Large test generators to handle new load IR syntax
llvm-svn: 230809
2015-02-27 23:29:33 +00:00
David Blaikie a79ac14fa6 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

llvm-svn: 230794
2015-02-27 21:17:42 +00:00
David Blaikie 79e6c74981 [opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.

This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.

* This doesn't modify gep operators, only instructions (operators will be
  handled separately)

* Textual IR changes only. Bitcode (including upgrade) and changing the
  in-memory representation will be in separate changes.

* geps of vectors are transformed as:
    getelementptr <4 x float*> %x, ...
  ->getelementptr float, <4 x float*> %x, ...
  Then, once the opaque pointer type is introduced, this will ultimately look
  like:
    getelementptr float, <4 x ptr> %x
  with the unambiguous interpretation that it is a vector of pointers to float.

* address spaces remain on the pointer, not the type:
    getelementptr float addrspace(1)* %x
  ->getelementptr float, float addrspace(1)* %x
  Then, eventually:
    getelementptr float, ptr addrspace(1) %x

Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.

update.py:
import fileinput
import sys
import re

ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile(       r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")

def conv(match, line):
  if not match:
    return line
  line = match.groups()[0]
  if len(match.groups()[5]) == 0:
    line += match.groups()[2]
  line += match.groups()[3]
  line += ", "
  line += match.groups()[1]
  line += "\n"
  return line

for line in sys.stdin:
  if line.find("getelementptr ") == line.find("getelementptr inbounds"):
    if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
      line = conv(re.match(ibrep, line), line)
  elif line.find("getelementptr ") != line.find("getelementptr ("):
    line = conv(re.match(normrep, line), line)
  sys.stdout.write(line)

apply.sh:
for name in "$@"
do
  python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
  rm -f "$name.tmp"
done

The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh

After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).

The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7636

llvm-svn: 230786
2015-02-27 19:29:02 +00:00
Ulrich Weigand 7db6918e2b [SystemZ] Support all TLS access models - CodeGen part
The current SystemZ back-end only supports the local-exec TLS access model.
This patch adds all required CodeGen support for the other TLS models, which
means in particular:

- Expand initial-exec TLS accesses by loading TLS offsets from the GOT
  using @indntpoff relocations.

- Expand general-dynamic and local-dynamic accesses by generating the
  appropriate calls to __tls_get_offset.  Note that this routine has
  a non-standard ABI and requires loading the GOT pointer into %r12,
  so the patch also adds support for the GLOBAL_OFFSET_TABLE ISD node.

- Add a new platform-specific optimization pass to remove redundant
  __tls_get_offset calls in the local-dynamic model (modeled after
  the corresponding X86 pass).

- Add test cases verifying all access models and optimizations.

llvm-svn: 229654
2015-02-18 09:13:27 +00:00
Ulrich Weigand bd039299c0 Use the integrated assembler as default on SystemZ
This was already done in clang, this commit now uses the integrated
assembler as default when using LLVM tools directly.

A number of test cases deliberately using an invalid instruction in
inline asm now have to use -no-integrated-as.

llvm-svn: 225820
2015-01-13 19:45:16 +00:00
Duncan P. N. Exon Smith be7ea19b58 IR: Make metadata typeless in assembly
Now that `Metadata` is typeless, reflect that in the assembly.  These
are the matching assembly changes for the metadata/value split in
r223802.

  - Only use the `metadata` type when referencing metadata from a call
    intrinsic -- i.e., only when it's used as a `Value`.

  - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode`
    when referencing it from call intrinsics.

So, assembly like this:

    define @foo(i32 %v) {
      call void @llvm.foo(metadata !{i32 %v}, metadata !0)
      call void @llvm.foo(metadata !{i32 7}, metadata !0)
      call void @llvm.foo(metadata !1, metadata !0)
      call void @llvm.foo(metadata !3, metadata !0)
      call void @llvm.foo(metadata !{metadata !3}, metadata !0)
      ret void, !bar !2
    }
    !0 = metadata !{metadata !2}
    !1 = metadata !{i32* @global}
    !2 = metadata !{metadata !3}
    !3 = metadata !{}

turns into this:

    define @foo(i32 %v) {
      call void @llvm.foo(metadata i32 %v, metadata !0)
      call void @llvm.foo(metadata i32 7, metadata !0)
      call void @llvm.foo(metadata i32* @global, metadata !0)
      call void @llvm.foo(metadata !3, metadata !0)
      call void @llvm.foo(metadata !{!3}, metadata !0)
      ret void, !bar !2
    }
    !0 = !{!2}
    !1 = !{i32* @global}
    !2 = !{!3}
    !3 = !{}

I wrote an upgrade script that handled almost all of the tests in llvm
and many of the tests in cfe (even handling many `CHECK` lines).  I've
attached it (or will attach it in a moment if you're speedy) to PR21532
to help everyone update their out-of-tree testcases.

This is part of PR21532.

llvm-svn: 224257
2014-12-15 19:07:53 +00:00