Summary:
This adds the core AVR TableGen file, along with the register descriptions.
Lines in AVR.td which require other TableGen files which haven't been committed
yet are commented out.
This is a fairly trivial patch, and should only require a quick review.
I kept the line width smaller than 80 columns, but there are a few exceptions
because I'm not sure how to split a string over several lines.
Reviewers: stoklund
Subscribers: dylanmckay, agnat
Differential Revision: http://reviews.llvm.org/D14684
llvm-svn: 256120
MIPS .reginfo section provides information on the registers used by
the code in the object file. Linker should collect this information and
write .reginfo section in the output file. This section contains a union
of used registers masks taken from input .reginfo sections and final
value of the `_gp` symbol.
For details see the "Register Information" section in Chapter 4 in the
following document:
ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
The patch implements .reginfo sections handling with a couple missed
features: a) it does not put output .reginfo section into the separate
REGINFO segment; b) it does not merge `ri_cprmask` masks from input
section. These features will be implemented later.
Differential Revision: http://reviews.llvm.org/D15669
llvm-svn: 256119
Summary:
r250697 fixed the mapping for ARM mode. We have to do the same for Thumb2 otherwise the same llvm.arm.ssat() will generate different saturating amount for ARM and Thumb.
r250697: http://reviews.llvm.org/rL250697
Reviewers: rmaprath
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D15653
llvm-svn: 256115
With the support of value profiling added, the Indexed prof
reader gets less efficient. The prof reader initialization
used to be just reading the file header, but with VP support
added, initialization needs to walk through all profile keys
of ondisk hash table resulting in very poor locality and large
memory increase (keys are stored together with the profile data
in the mapped profile buffer). Even worse, when the reader is
used by the compiler (not llvm-profdata too), the penalty becomes
very high as compilation of each single module requires touching
profile data buffer for the whole program.
In this patch, the icall target values (MD5hash) are no longer eargerly
converted back to name strings when the data is read into memory. New
interface is added to to profile reader so that InstrProfSymtab can be
lazily created for Indexed profile reader on-demand. Creating of the
symtab is intended to be used by llvm-profdata tool for symbolic dumping
of VP data. It can be used with compiler (for legacy out of tree uses)
too but not recommended due to compile time and memory reasons
mentioned above.
Some other cleanups are also included: Function Addr to md5 map is now
consolated into InstrProfSymtab. InstrProfStringtab is no longer used and
eliminated.
llvm-svn: 256114
`CloneAndPruneIntoFromInst` sometimes RAUW's dead instructions with
`undef` before erasing them (to avoid deleting instructions that still
have uses). This changes the `WeakVH` in `OperandBundleCallSites` to
hold an `undef`, and we need to guard for this situation in eventuality
in `llvm::InlineFunction`.
llvm-svn: 256110
An error that is pretty easy to make is to use the lazy bitcode reader
and then do something like
if (V.use_empty())
The problem is that uses in unmaterialized functions are not accounted
for.
This patch adds asserts that all uses are known.
llvm-svn: 256105
Adds driver options named -glldb and -gsce to mean -g plus tuning for
lldb and SCE debuggers respectively; the existing -ggdb option does
the same for gdb. Existing options -ggdb0, -ggdb1 etc. unpack into
-ggdb -g<N>. (There will not be -glldb<N> or -gsce<N> options.) The
tuning gets a target-specific default in the driver, and is passed
into cc1 with the new -debugger-tuning option.
As fallout, fixes where '-gsplit-dwarf -g0' would ignore the -g0 part
on Linux.
Differential Revision: http://reviews.llvm.org/D15651
llvm-svn: 256104
The test will mainly be useful to check that the .s file assembles and relocates properly because vtables reference functions in their data section.
llvm-svn: 256102
Make personality functions, prefix data, and prologue data hungoff
operands of Function.
This is based on the email thread "[RFC] Clean up the way we store
optional Function data" on llvm-dev.
Thanks to sanjoyd, majnemer, rnk, loladiro, and dexonsmith for feedback!
Includes a fix to scrub value subclass data in dropAllReferences. Does not
use binary literals.
Differential Revision: http://reviews.llvm.org/D13829
llvm-svn: 256095
Make personality functions, prefix data, and prologue data hungoff
operands of Function.
This is based on the email thread "[RFC] Clean up the way we store
optional Function data" on llvm-dev.
Thanks to sanjoyd, majnemer, rnk, loladiro, and dexonsmith for feedback!
Includes a fix to scrub value subclass data in dropAllReferences.
Differential Revision: http://reviews.llvm.org/D13829
llvm-svn: 256093
Creator and lookup interfaces are added to this symtab class.
The new interfaces will be used by InstrProf Readers and writer.
A unit test is also added for the new APIs.
llvm-svn: 256092
Make personality functions, prefix data, and prologue data hungoff
operands of Function.
This is based on the email thread "[RFC] Clean up the way we store
optional Function data" on llvm-dev.
Thanks to sanjoyd, majnemer, rnk, loladiro, and dexonsmith for feedback!
Differential Revision: http://reviews.llvm.org/D13829
llvm-svn: 256090
The patch configure ELF header flags for MIPS target. For now the flags
are hard coded. In fact they depends on ELF flags of input object files
and selected emulation.
Differential Revision: http://reviews.llvm.org/D15575
llvm-svn: 256089
llc_dwarf adds an mtriple, which forces this to use COFF, causing
the test to fail. Hopefully using regular llc without the triple
will work fine everywhere
llvm-svn: 256084
Summary:
The analysis of shader inputs was completely wrong. We were passing the
wrong index to AttributeSet::hasAttribute() and the logic for which
inputs where in SGPRs was wrong too.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D15608
llvm-svn: 256082
As shown by the included test case, it's reasonable to end up with constant references during base pointer calculation. The code actually handled this case just fine, we only had the assert to help isolate problems under the belief that constant references shouldn't be present in IR generated by managed frontends. This turned out to be wrong on two fronts: 1) Manual Jacobs is working on a language with constant references, and b) we found a case where the optimizer does create them in practice.
llvm-svn: 256079
Reapplies r256063, except instead of frugally re-using an LLVM enum,
we define a Clang enum, to avoid exposing too much LLVM interface.
Differential Revision: http://reviews.llvm.org/D15650
llvm-svn: 256078
Summary:
First up is instcombine, where in the dbg.declare -> dbg.value conversion,
the llvm.dbg.value needs to be called on the actual loaded value, rather
than the address (since the whole point of this transformation is to be
able to get rid of the alloca). Further, now that that's cleaned up, we
can remove a hack in the backend, that would add an implicit OP_deref if
the argument to dbg.value was an alloca. This stems from before the
existence of DIExpression and is no longer necessary since the deref can
be expressed explicitly.
Now, in order to make sure that the tests pass with this change, we need to
correct the printing of DEBUG_VALUE comments to take into account the
expression, which wasn't taken into account before.
Unfortunately, for both these changes, there were a number of incorrect
test cases (mostly the wrong number of DW_OP_derefs, but also a couple
where the test itself was broken more badly). aprantl and I have gone
through and adjusted these test case in order to make them pass with
these fixes and in some cases to make sure they're actually testing
what they are meant to test.
Reviewers: aprantl
Subscribers: dsanders
Differential Revision: http://reviews.llvm.org/D14186
llvm-svn: 256077
noduplicate prevents unrolling of small loops that happen to have
barriers in them. If a loop has a barrier in it, it is OK to duplicate
it for the unroll.
llvm-svn: 256075
Summary:
When copying aggregate registers within the same register class, there may
be an overlap between source and destination that forces us to do the copy
backwards.
Do the simplest possible thing that guarantees the correct order of moves
when there are overlaps, and does whatever when there is no overlap. (The
last part forces some trivial adjustments to test cases.)
Together with r255906, this fixes a VM fault in Unreal Elemental Demo.
While at it, change the generation of kill and def flags to something that
looks more reasonable. This method is used very late during compilation, so
it probably doesn't matter in practice, and to be honest, I don't know if
this change is actually correct because the semantics in connection with
aggregate registers vs. sub-registers are not clear to me.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93264
Reviewers: arsenm, tstellarAMD
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D15622
llvm-svn: 256072
Dylan McKay