Similar to D62188: a BitcodeFile's symbol table may be iterated twice, once in
--start-lib (lazy) state, and once in the non-lazy state. This patch
makes `parseLazy` save `symbols[i]` so that the non-lazy state does not need to
re-insert to the global symbol table. Avoiding a redundant `saver.save` may save
memory.
`Maximum resident set size (kbytes)` for a large --thinlto-index-only link:
* without the patch: 10164000
* with the patch: 10095716 (0.6% decrease)
Note: we can remove `saver.save` if `BitcodeCompiler::add` does not transfer the ownership
of `f.obj` in `checkError(ltoObj->add(std::move(f.obj), resols));`.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D116390
@tejohnson noticed that freeing MemoryBuffer instances right before
`lto->compile` can save RSS, likely because the memory can be reused by
LTO indexing (e.g. ThinLTO import/export lists).).
For ELFFileBase instances, symbol and section names are backed by MemoryBuffer,
so destroying MemoryBuffer would make some infrequent passes (parseSymbolVersion,
reportBackrefs) crash and make debugging difficult.
For a BitcodeFile, its content is completely unused, but destroying its
MemoryBuffer makes the buffer identifier inaccessible and may introduce
constraints for future changes.
This patch leverages madvise(MADV_DONTNEED) which achieves the major gain
without the latent issues.
`Maximum resident set size (kbytes): ` for a large --thinlto-index-only link:
* current behavior: 10146104KiB
* destroy MemoryBuffer instances: 8555240KiB
* madvise(MADV_DONTNEED) just bitcodeFiles and lazyBitcodeFiles: 8737372KiB
* madvise(MADV_DONTNEED) all MemoryBuffers: 8739796KiB (16% decrease)
Depends on D116366
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D116367
and remove associated make<XXX> calls.
gnuHash and sysvHash are unchanged, otherwise LinkerScript::discard would
destroy the objects which may be referenced by input section descriptions.
My x86-64 lld executable is 121+KiB smaller.
The new `lazy` state is the inverse of the previous `LazyObjFile::extracted`.
There are many advantages:
* previously when a LazyObjFile was extracted, a new ObjFile/BitcodeFile was created; now the file is reused, just with `lazy` cleared
* avoid the confusing transfer of `symbols` from LazyObjFile to the new file
* the `incompatible file:` diagnostic is unified with `is incompatible with`
* simpler code, smaller executable (6200+ bytes smaller on x86-64)
* make eager parsing feasible (for parallel section/symbol table initialization)
Calling `Allocate` with 0 size (when .symtab is absent, e.g.
`invalid/mips-invalid-options-descriptor.test`) may return a nullptr, which will
crash with -fsanitize=null (the underlying `Allocate` function is
LLVM_ATTRIBUTE_RETURNS_NONNULL).
* Avoid the name truncation quirk in SymbolTable::insert: the truncated name will be replaced by @@ again.
* Allow foo and foo@@v1 in different files to be diagnosed as duplicate definition error (GNU ld behavior)
* Avoid potential redundant strlen on symbol name due to StringRefZ in ObjFile<ELFT>::initializeSymbols
SHT_GNU_verdef is typically small, so it's unnecessary to reserve the vector.
While here, fix a hypothetical issue when SHT_GNU_verdef has non-increasing
version indexes, which don't happen with GNU ld, gold, ld.lld's output.
My x86-64 lld executable is 256 bytes smaller.
sizeof(ObjFile<ELF64LE>) is decreased from 344 to 272 on an ELF64 system.
In a large link with 30000 ObjFiles, this may be 2+MiB saving.
Change std::vector members to SmallVector, and std::string members to
SmallString<0> (these members typically don't benefit from small string optimization).
On Linux x86-64 the lld executable is ~6k smaller.
This fixes an issue introduced in D101996.
A weak reference in a shared library could be incorrectly reported if
there is another library that has a strong reference to the same symbol.
Differential Revision: https://reviews.llvm.org/D115041
When a comdat symbol is defined in both bitcode and regular object
files, which are contained in the same archive, the linker could lose
the flag that the symbol is used in the regular object file and allow
LTO to internalize it, which led to "error: undefined symbol".
The issue was introduced in D79300.
Differential Revision: https://reviews.llvm.org/D114801
The canonical term is "extract" (GNU ld documentation, Solaris's `-z *extract`
options). Avoid inventing a term and match --why-extract. (ld64 prefers "load"
but the word is overloaded too much)
Mostly MFC, except for --help messages and the header row in
--print-archive-stats output.
PR52408 reported an sh_info=0 instance. I have seen sh_info=0
independently before.
sh_info>=num_sections is probably very rare. Just use one diagnostic for
the two types of errors.
Delete invalid-relocations.test which is covered by invalid/bad-reloc-target.test
Differential Revision: https://reviews.llvm.org/D113466
For `InputSection` `.foo`, its `InputBaseSection::{areRelocsRela,firstRelocation,numRelocation}` basically
encode the information of `.rel[a].foo`. However, one uint32_t (the relocation section index)
suffices. See the implementation of `relsOrRelas`.
This change decreases sizeof(InputSection) from 184 to 176 on 64-bit Linux.
The maximum resident set size linking a large application (1.2G output) decreases by 0.39%.
Differential Revision: https://reviews.llvm.org/D112513
In PGO, a C++ external linkage function `foo` has a private counter
`__profc_foo` and a private `__profd_foo` in a `comdat nodeduplicate`.
A `__attribute__((weak))` function `foo` has a weak hidden counter `__profc_foo`
and a private `__profd_foo` in a `comdat nodeduplicate`.
In `ld.lld a.o b.o`, say a.o defines an external linkage `foo` and b.o
defines a weak `foo`. Currently we treat `comdat nodeduplicate` as `comdat any`,
ld.lld will incorrectly consider `b.o:__profc_foo` non-prevailing. In the worst
case when `b.o:__profd_foo` is retained and `b.o:__profc_foo` isn't, there will
be dangling reference causing an `undefined hidden symbol` error.
Add SelectionKind to `Comdat` in IRSymtab and let linkers ignore nodeduplicate comdat.
Differential Revision: https://reviews.llvm.org/D106228
The ELF specification says "The link editor honors the common definition and
ignores the weak ones." GNU ld and our Symbol::compare follow this, but the
--fortran-common code (D86142) made a mistake on the precedence.
Fixes https://bugs.llvm.org/show_bug.cgi?id=51082
Reviewed By: peter.smith, sfertile
Differential Revision: https://reviews.llvm.org/D105945
This is a follow up to https://reviews.llvm.org/D104080, and ca3bdb57fa (diff-e64a48fabe31db213a631fdc5f2acb51bdddf3f16a8fb2928784f4c579229585). The implementation of call graph profile was changed from a black box section to relocation approach. This was done to be compatible with post processing tools like strip/objcopy, and llvm equivalent. When they are invoked on object file before the final linking step with this new approach the symbol indices correctness is preserved.
The GNU binutils tools change the REL section to RELA section, unlike llvm tools. For example when strip -S is run on the ELF object files, as an intermediate step before linking. To preserve compatibility this patch extends implementation in LLD and ELFDumper to support both REL and RELA sections for call graph profile.
Reviewed By: MaskRay, jhenderson
Differential Revision: https://reviews.llvm.org/D105217
... even on targets preferring RELA. The section is only consumed by ld.lld
which can handle REL.
Follow-up to D104080 as I explained in the review. There are two advantages:
* The D104080 code only handles RELA, so arm/i386/mips32 etc may warn for -fprofile-use=/-fprofile-sample-use= usage.
* Decrease object file size for RELA targets
While here, change the relocation to relocate weights, instead of 0,1,2,3,..
I failed to catch the issue during review.
Currently when .llvm.call-graph-profile is created by llvm it explicitly encodes the symbol indices. This section is basically a black box for post processing tools. For example, if we run strip -s on the object files the symbol table changes, but indices in that section do not. In non-visible behavior indices point to wrong symbols. The visible behavior indices point outside of Symbol table: "invalid symbol index".
This patch changes the format by using R_*_NONE relocations to indicate the from/to symbols. The Frequency (Weight) will still be in the .llvm.call-graph-profile, but symbol information will be in relocation section. In LLD information from both sections is used to reconstruct call graph profile. Relocations themselves will never be applied.
With this approach post processing tools that handle relocations correctly work for this section also. Tools can add/remove symbols and as long as they handle relocation sections with this approach information stays correct.
Doing a quick experiment with clang-13.
The size went up from 107KB to 322KB, aggregate of all the input sections. Size of clang-13 binary is ~118MB. For users of -fprofile-use/-fprofile-sample-use the size of object files will go up slightly, it will not impact final binary size.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D104080
Currently, when reporting unresolved symbols in shared libraries, if an
undefined symbol is firstly seen in a regular object file that shadows
the reference for the same symbol in a shared object. As a result, the
error for the unresolved symbol in the shared library is not reported.
If referencing sections in regular object files are discarded because of
'--gc-sections', no reports about such symbols are generated, and the
linker finishes successfully, generating an output image that fails on
the run.
The patch fixes the issue by keeping symbols, which should be checked,
for each shared library separately.
Differential Revision: https://reviews.llvm.org/D101996
In future patches I will be setting the IsText parameter frequently so I will refactor the args to be in the following order. I have removed the FileSize parameter because it is never used.
```
static ErrorOr<std::unique_ptr<MemoryBuffer>>
getFile(const Twine &Filename, bool IsText = false,
bool RequiresNullTerminator = true, bool IsVolatile = false);
static ErrorOr<std::unique_ptr<MemoryBuffer>>
getFileOrSTDIN(const Twine &Filename, bool IsText = false,
bool RequiresNullTerminator = true);
static ErrorOr<std::unique_ptr<MB>>
getFileAux(const Twine &Filename, uint64_t MapSize, uint64_t Offset,
bool IsText, bool RequiresNullTerminator, bool IsVolatile);
static ErrorOr<std::unique_ptr<WritableMemoryBuffer>>
getFile(const Twine &Filename, bool IsVolatile = false);
```
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D99182
This change introduces support for zero flag ELF section groups to lld.
lld already supports COMDAT sections, which in ELF are a special type of
ELF section groups. These are generally useful to enable linker GC where
you want a group of sections to always travel together, that is to be
either retained or discarded as a whole, but without the COMDAT
semantics. Other ELF linkers already support zero flag ELF section
groups and this change helps us reach feature parity.
Differential Revision: https://reviews.llvm.org/D96636
When parsing an object file, LLD interleaves undefined symbol resolution (which
may recursively fetch other lazy objects) with defined symbol resolution.
This may lead to surprising results, e.g. if an object file defines currently
undefined symbols and references another lazy symbol, we may interleave defined
symbols with the lazy fetch, potentially leading to the defined symbols
resolving to different files.
As an example, if both `a.a(a.o)` and `a.a(b.o)` define `foo` (not in COMDAT
group, or in different COMDAT groups) and `__profd_foo` (in COMDAT group
`__profd_foo`). LLD may resolve `foo` to `a.a(a.o)` and `__profd_foo` to
`b.a(b.o)`, i.e. different files.
```
parse ArchiveFile a.a
entry fetches a.a(a.o)
parse ObjectFile a.o
define entry
define foo
reference b
b fetches a.a(b.o)
parse ObjectFile b.o
define prevailing __profd_foo
define (ignored) non-prevailing __profd_foo
```
Assuming a set of interconnected symbols are defined all or none in several lazy
objects. Arguably making them resolve to the same file is preferable than making
them resolve to different files (some are lazy objects).
The main argument favoring the new behavior is the stability. The relative order
between a defined symbol and an undefined symbol does not change the symbol
resolution behavior. Only the relative order between two undefined symbols can
affect fetching behaviors.
---
The real world case is reduced from a Fuchsia PGO usage: `a.a(a.o)` has a
constructor within COMDAT group C5 while `a.a(b.o)` has a constructor within
COMDAT group C2. Because they use different group signatures, they are not
de-duplicated. It is not entirely whether Clang behavior is entirely conforming.
LLD selects the PGO counter section (`__profd_*`) from `a.a(b.o)` and the
constructor section from `a.a(a.o)`. The `__profd_*` is a SHF_LINK_ORDER section
linking to its own non-prevailing constructor section, so LLD errors
`sh_link points to discarded section`. This patch fixes the error.
Differential Revision: https://reviews.llvm.org/D95985
The current diagnostic has confused users. The new wording is adapted from one suggested by Ian Lance Taylor.
Differential Revision: https://reviews.llvm.org/D95917
Add support for linking powerpcle code in LLD.
Rewrite lld/test/ELF/emulation-ppc.s to use a shared check block and add powerpcle tests.
Update tests.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D93917
This patch changes the archive handling to enable the semantics needed
for legacy FORTRAN common blocks and block data. When we have a COMMON
definition of a symbol and are including an archive, LLD will now
search the members for global/weak defintions to override the COMMON
symbol. The previous LLD behavior (where a member would only be included
if it satisifed some other needed symbol definition) can be re-enabled with the
option '-no-fortran-common'.
Differential Revision: https://reviews.llvm.org/D86142
Fangrui Song