Summary:
Preserve chain dependecies between old and new loads constructed to
prevent loads from reordering below later stores.
Fixes PR34088.
Reviewers: craig.topper, spatel, RKSimon, efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36528
llvm-svn: 310604
In FoldConstantArithmetic, handle BUILD_VECTOR nodes that do implicit truncation on the elements.
This is similar to what is done in FoldConstantVectorArithmetic.
Differential Revision:
https://reviews.llvm.org/D36506
llvm-svn: 310593
This patch is in 2 parts:
1 - replace combineBT's use of SimplifyDemandedBits (hasOneUse only) with SelectionDAG::GetDemandedBits to more aggressively determine the lower bits used by BT.
2 - update SelectionDAG::GetDemandedBits to support ANY_EXTEND - if the demanded bits are only in the non-extended portion, then peek through and demand from the source value and then ANY_EXTEND that if we found a match.
Differential Revision: https://reviews.llvm.org/D35896
llvm-svn: 309486
This patch moves the DAGCombiner::GetDemandedBits function to SelectionDAG::GetDemandedBits as a first step towards making it easier for targets to get to the source of any demanded bits without the limitations of SimplifyDemandedBits.
Differential Revision: https://reviews.llvm.org/D35841
llvm-svn: 308983
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
Relanding after rewriting undef.ll test to avoid host-dependant
endianness.
As discussed in D34087, rewrite areNonVolatileConsecutiveLoads using
generic checks. Also, propagate missing local handling from there to
BaseIndexOffset checks.
Tests of note:
* test/CodeGen/X86/build-vector* - Improved.
* test/CodeGen/BPF/undef.ll - Improved store alignment allows an
additional store merge
* test/CodeGen/X86/clear_upper_vector_element_bits.ll - This is a
case we already do not handle well. Here, the DAG is improved, but
scheduling causes a code size degradation.
Reviewers: RKSimon, craig.topper, spatel, andreadb, filcab
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D34472
llvm-svn: 307114
As discussed in D34087, rewrite areNonVolatileConsecutiveLoads using
generic checks. Also, propagate missing local handling from there to
BaseIndexOffset checks.
Tests of note:
* test/CodeGen/X86/build-vector* - Improved.
* test/CodeGen/BPF/undef.ll - Improved store alignment allows an
additional store merge
* test/CodeGen/X86/clear_upper_vector_element_bits.ll - This is a
case we already do not handle well. Here, the DAG is improved, but
scheduling causes a code size degradation.
Reviewers: RKSimon, craig.topper, spatel, andreadb, filcab
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D34472
llvm-svn: 306819
When SelectionDAG expands memcpy (or memmove) call into a sequence of load and store instructions, it disregards dereferenceable flag even the source pointer is known to be dereferenceable.
This results in an assertion failure if SelectionDAG commonizes a load instruction generated for memcpy with another load instruction for the source pointer.
This patch makes SelectionDAG to set the dereferenceable flag for the load instructions properly to avoid the assertion failure.
Differential Revision: https://reviews.llvm.org/D34467
llvm-svn: 306209
This step is just intended to reduce code duplication rather than change any functionality.
A follow-up would be to replace PPCTargetLowering::spliceIntoChain() usage with this new helper.
Differential Revision: https://reviews.llvm.org/D33649
llvm-svn: 305192
This prevents against assertion errors like PR32659 which occur from a
replacement deleting a node after it's been added to the list argument
of RemoveDeadNodes. The specific failure from PR32659 does not
currently happen, but it is still potentially possible. The underlying
cause is that the callers of the change dfunction builds up a list of
nodes to delete after having moved their uses and it possible that a
move of a later node will cause a previously deleted nodes to be
deleted.
Reviewers: bkramer, spatel, davide
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33731
llvm-svn: 305070
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
Currently getOptimalMemOpType returns i32 for large enough sizes without
checking for alignment, leading to poor code generation when misaligned accesses
aren't permitted as we generate a word store then later split it up into byte
stores. This means we inadvertantly go over the MaxStoresPerMemcpy limit and for
memset we splat the memset value into a word then immediately split it up
again.
Fix this by leaving it up to FindOptimalMemOpLowering to figure out which type
to use, but also fix a bug there where it wasn't correctly checking if
misaligned memory accesses are allowed.
Differential Revision: https://reviews.llvm.org/D33442
llvm-svn: 303990
Refactor the strlen optimization code to work for both strlen and wcslen.
This especially helps with programs in the wild where people pass
L"string"s to const std::wstring& function parameters and the wstring
constructor gets inlined.
This also fixes a lingerind API problem/bug in getConstantStringInfo()
where zeroinitializers would always give you an empty string (without a
length) back regardless of the actual length of the initializer which
did not work well in the TrimAtNul==false causing the PR mentioned
below.
Note that the fixed getConstantStringInfo() needed fixes to SelectionDAG
memcpy lowering and may lead to some cases for out-of-bounds
zeroinitializer accesses not getting optimized anymore. So some code
with UB may produce out of bound memory reads now instead of just
producing zeros.
The refactoring "accidentally" fixes http://llvm.org/PR32124
Differential Revision: https://reviews.llvm.org/D32839
llvm-svn: 303461
This patch adds min/max population count, leading/trailing zero/one bit counting methods.
The min methods return answers based on bits that are known without considering unknown bits. The max methods give answers taking into account the largest count that unknown bits could give.
Differential Revision: https://reviews.llvm.org/D32931
llvm-svn: 302925
- This change allows targets to opt-in to using them instead of the log2
shufflevector algorithm.
- The SLP and Loop vectorizers have the common code to do shuffle reductions
factored out into LoopUtils, and now have a unified interface for generating
reductions regardless of the preference of the target. LoopUtils now uses TTI
to determine what kind of reductions the target wants to handle.
- For CodeGen, basic legalization support is added.
Differential Revision: https://reviews.llvm.org/D30086
llvm-svn: 302514
This adds routines for reseting KnownBits to unknown, making the value all zeros or all ones. It also adds methods for querying if the value is zero, all ones or unknown.
Differential Revision: https://reviews.llvm.org/D32637
llvm-svn: 302262
This patch adds zext, sext, and trunc methods to KnownBits and uses them where possible.
Differential Revision: https://reviews.llvm.org/D32784
llvm-svn: 302088
PR31088 demonstrated that we were assuming that only integers require promotion from <1 x iX> types, when in fact float types may require it as well - in this case half floats.
This patch adds support for extension/truncation for both integer and float types.
Differential Revision: https://reviews.llvm.org/D32391
llvm-svn: 301910
This is the SelectionDAG version of D32521. If know where at least one 1 is located in the input to these intrinsics we can place an upper bound on the number of bits needed to represent the count and thus increase the number of known zeros in the output.
I think we can also refine this further for CTTZ_UNDEF/CTLZ_UNDEF by assuming that the answer will never be BitWidth. I've left this out for now because it caused other test failures across multiple targets. Usually because of turning ADD into OR based on this new information.
I'll fix CTPOP in a future patch.
Differential Revision: https://reviews.llvm.org/D32692
llvm-svn: 301806
Summary: As per discution on how to get better codegen an large int legalization, it became clear that using a glue for the carry was preventing several desirable optimizations. Passing the carry down as a value allow for more flexibility.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D29872
llvm-svn: 301775
Summary: This patch adds isNegative, isNonNegative for querying whether the sign bit is known. It also adds makeNegative and makeNonNegative for controlling the sign bit.
Reviewers: RKSimon, spatel, davide
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32651
llvm-svn: 301747
Reapplied r299221 after fix for nondeterminism in ThinLTO builder (rL301599), with extra check for implicit truncation of inserted element.
llvm-svn: 301644
This patch replaces the separate APInts for KnownZero/KnownOne with a single KnownBits struct. This is similar to what was done to ValueTracking's version recently.
This is largely a mechanical transformation from KnownZero to Known.Zero.
Differential Revision: https://reviews.llvm.org/D32569
llvm-svn: 301620
This patch uses various APInt methods to reduce the number of temporary APInts. These were all found while working through converting SelectionDAG's computeKnownBits to also use the KnownBits struct recently added to the ValueTracking version.
llvm-svn: 301618
This patch introduces a new KnownBits struct that wraps the two APInt used by computeKnownBits. This allows us to treat them as more of a unit.
Initially I've just altered the signatures of computeKnownBits and InstCombine's simplifyDemandedBits to pass a KnownBits reference instead of two separate APInt references. I'll do similar to the SelectionDAG version of computeKnownBits/simplifyDemandedBits as a separate patch.
I've added a constructor that allows initializing both APInts to the same bit width with a starting value of 0. This reduces the repeated pattern of initializing both APInts. Once place default constructed the APInts so I added a default constructor for those cases.
Going forward I would like to add more methods that will work on the pairs. For example trunc, zext, and sext occur on both APInts together in several places. We should probably add a clear method that can be used to clear both pieces. Maybe a method to check for conflicting information. A method to return (Zero|One) so we don't write it out everywhere. Maybe a method for (Zero|One).isAllOnesValue() to determine if all bits are known. I'm sure there are many other methods we can come up with.
Differential Revision: https://reviews.llvm.org/D32376
llvm-svn: 301432
This reverts commit r301105, 4, 3 and 1, as a follow up of the previous
revert, which broke even more bots.
For reference:
Revert "[APInt] Use operator<<= where possible. NFC"
Revert "[APInt] Use operator<<= instead of shl where possible. NFC"
Revert "[APInt] Use ashInPlace where possible."
PR32754.
llvm-svn: 301111
Nirav Dave