So that instructions like `lla a5, (0xFF + end) - 4` (supported by GNU as) can
be parsed.
Add a missing test that an operand like `foo + foo` is not allowed.
Reviewed By: jrtc27
Differential Revision: https://reviews.llvm.org/D92293
This enables bswap/bitreverse to combine with other GREVI patterns or each other without needing to add more special cases to the DAG combine or new DAG combines.
I've also enabled the existing GREVI combine for GREVIW so that it can pick up the i32 bswap/bitreverse on RV64 after they've been type legalized to GREVIW.
Differential Revision: https://reviews.llvm.org/D92253
GORCI performs an OR between each stage. So we need to ensure only
one stage is active before doing this combine.
Initial attempts at finding a test case for this failed due to
the order things get combined. It's most likely that we'll form
one stage of GREVI then combine to GORCI before the two stages of
GREVI are able to be formed and combined with each other to form
a multi stage GREVI.
Differential Revision: https://reviews.llvm.org/D92289
Not sure why bswap was treated specially. This also applies to bitreverse
or generic grevi. We can improve this in future patches.
For now I just wanted to get the consistency and the test coverage
as I plan to make some other changes around bswap.
We had an zexti32 after a sign_extend_inreg. The AND X, 0xffffffff
part of the zexti32 should never occur since SimplifyDemandedBits
from the sign_extend_inreg would have removed it.
We also had sexti32 as the root node of a pattern, but SelectionDAGISel
matches assertsext early before the tablegen based patterns are
evaluated.
These patterns are using zexti32 which matches either assertzexti32
or (and X, 0xffffffff). But if we match (and X, 0xffffffff) it will
remove the AND and the inputs may no longer have the zero bits
needed to guarantee the result has enough zeros.
This commit changes the patterns to only match assertzexti32.
I'm not sure how to test the broken case since the DIVUW/REMUW nodes
are created during type legalization, but type legalization won't
create an (and X, 0xfffffffff) directly on the inputs.
I've also changed the zexti32 on the root of the pattern to just
checking for AND. We were previously also matching assertzexti32,
but I doubt that pattern would ever occur.
Start with an assumption that FMA is faster than Fmul+FAdd. If thats not true
on some particular implementation we can add a tuning parameter in the future.
I've update the fmuladd test cases and added new test cases for fast math flag
based contraction.
Differential Revision: https://reviews.llvm.org/D91987
This is the logically correct thing to do. But it generates worse
code for i32 umin/umax on the rv64 due to type legalize requesting
zext even though the arguments are sext. Maybe we can teach type
legalizer to use sext for umin/umax for RISCV.
It's also producing possibly worse code on i64 on RV32 since we
still end up with selects that become branches. But this seems
like something we could improve in type legalization or DAG combine.
Hopefully this makes D92095 work for RISCV with Zbb.
This adds custom opcodes for FSLW/FSRW so we can type legalize
fshl/fshr without needing to match a sign_extend_inreg.
I've used the operand order from fshl/fshr to make the isel
pattern similar to the non-W form. It was also hard to decide
another order since the register instruction has the shift amount
as the second operand, but the immediate instruction has it as
the third operand.
Differential Revision: https://reviews.llvm.org/D91479
This is a special calling convention to be used by the GHC compiler.
Patch by Andreas Schwab (schwab)
Differential Revision: https://reviews.llvm.org/D89788
X86 was already specially marking fma as commutable which allowed
tablegen to autogenerate commuted patterns. This moves it to the target
independent definition and fix up the targets to remove now
unneeded patterns.
Unfortunately, the tests change because the commuted version of
the patterns are generating operands in a different than the
explicit patterns.
Differential Revision: https://reviews.llvm.org/D91842
We generate two 4 byte loads or two stores as part of the expansion.
Previously the MemOperand was set the same for both to cover the
full 8 bytes. Now we set a separate 4 byte mem operand for each
with a 4 byte offset for the high part.
Prior to this the DefaultMode was never selected, but RISCVGenDAGISel.inc, RISCVGenRegisterInfo.inc, RISCVGenGlobalISel.inc all ended up with extra table entries for that mode.
This patch removes the RV32 and uses DefaultMode for RV32. This impressively reduces the size of my release+asserts llc binary by about 270K. About 15K from RISCVGenDAGISel.inc, 1-2K from RISCVGenRegisterInfo.inc, but the vast majority from RISCVGenGlobalISel.inc.
Differential Revision: https://reviews.llvm.org/D90973
Previously we required a sra to pattern match these properly in isel. If the consumer didn't need the result sign extended we'll have an srl instead of sra and fail to match.
This patch switches to custom legalizing to GREVIW using portions of D91259.
Differential Revision: https://reviews.llvm.org/D91457
This should result in better utilization of RORIW since we
don't need to look for a SIGN_EXTEND_INREG that may not exist.
Also remove rotl/rotr isel matching to GREVI and just prefer RORI.
This is to keep consistency so we don't have to match ROLW/RORW
to GREVIW as well. I imagine RORI/RORIW performance will be the
same or better than GREVI.
Differential Revision: https://reviews.llvm.org/D91449
This moves the recognition of GREVI and GORCI from TableGen patterns
into a DAGCombine. This is done primarily to match "deeper" patterns in
the future, like (grevi (grevi x, 1) 2) -> (grevi x, 3).
TableGen is not best suited to matching patterns such as these as the compile
time of the DAG matchers quickly gets out of hand due to the expansion of
commutative permutations.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D91259
@tangxingxin1008 found a bug that regard vadd.vv v1, v3, a0 as a valid V
instruction. We should remove the VRegAsmOperand operand class and use
VR register class directly.
Patched by: tangxingxin1008, Hsiangkai
Differential Revision: https://reviews.llvm.org/D91712
This patch factors out the part of printInstruction that gets the
mnemonic string for a given MCInst. This is intended to be used
subsequently for the instruction-mix remarks to display the final
mnemonic (D90040).
Unfortunately making `getMnemonic` available to the AsmPrinter
seems to require making it virtual. Not sure if there's a way around
that with the current layering of the AsmPrinters.
Reviewed By: Paul-C-Anagnostopoulos
Differential Revision: https://reviews.llvm.org/D90039
We need to make sure the upper 32 bits are all ones to ensure the result is properly sign extended. Previously we only checked the lower 32 bits of the mask. I've also added a check that the shift amount is less than 32. Without that the original code asserts inside maskLeadingOnes if the SROI check is removed or the SROIW pattern is checked first. I've refactored the code to use early outs to reduce nesting.
I've also updated SLOIW matching with the same changes, but I couldn't find a broken test case with the existing code.
Differential Revision: https://reviews.llvm.org/D90961
Similar to the X86 and AMDGPU targets, this uses a macro to cut down on
repetitive and error-prone code when converting RISCVISD node names to
strings in getTargetNodeName.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D91414
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
-Use MCRegister instead of Register in MC layer.
-Move some enums from RISCVInstrInfo.h to RISCVBaseInfo.h to be with other TSFlags bits.
Differential Revision: https://reviews.llvm.org/D91114
The fshl and fshr intrinsics are defined to modulo their shift amount by the bitwidth of one of their inputs. The FSR/FSL instructions read one extra bit from the shift amount. If that bit is set the inputs are swapped. In order to preserve the semantics of the llvm intrinsics we need to make sure that the extra bit isn't set. DAG combine or instcombine may have removed any mask that was originally present.
We could be smarter here and try to use computeKnownBits to check if the bit is known zero, but wanted to start with correctness.
Differential Revision: https://reviews.llvm.org/D90905
We were creating RISCVISD::SELECT_CC nodes with Glue output that was never being used, and the tablegen SDNode had the SDNPInGlue flag instead of the SDNPOutGlue flag.
Since we don't seem to need the Glue just get rid of it from both places.
Differential Revision: https://reviews.llvm.org/D91199
This uses the shiftop PatFrags to handle the masked shift amount
and unmasked shift amount cases. That also checks XLen as part
of the masked amount check so we don't need separate RV32 and RV64
patterns.
Differential Revision: https://reviews.llvm.org/D91016
Bitconvert requires the bitwidth to match on both sides. On RV64
the GPR size is i64 so bitconvert between f32 isn't possible. The
node should never be generated so the pattern won't ever match, but
moving the patterns under IsRV32 makes it more obviously impossible.
It also moves it to a similar location to the patterns for the
custom nodes we use for RV64.
The multiply part of FMA is commutable, but TargetSelectionDAG.td
doesn't have it marked as commutable so tablegen won't automatically
create the additional patterns.
So manually add commuted patterns.
D80526 added custom lowering to pick the si lib call on RV64, but this custom handling is only enabled when the F and D extension are both disabled. This prevents the si library call from being used for double when F is enabled but D is not.
This patch changes the behavior so we always enable the Custom hook on RV64 and decide in ReplaceNodeResults if we should emit a libcall based on whether the FP type should be softened or not.
Differential Revision: https://reviews.llvm.org/D90817
The _F and _D registers are already sub/super registers. When one gets allocated all its aliases are already marked as allocated. We don't need to explicitly shadow it too.
I believe shadow is for calling conventions like 64-bit Windows on X86 where have rules like this
CCIfType<[i32], CCAssignToRegWithShadow<[ECX , EDX , R8D , R9D ],
[XMM0, XMM1, XMM2, XMM3]>>
For that calling convention the argument number determines which register is used regardless of how many scalars or vectors came before it.
Removing this removes a question I had in D90738.
Differential Revision: https://reviews.llvm.org/D90801
There is no FSLI instruction, but we can emulate it using FSRI by swapping operands and subtracting the immediate from the bitwidth.
Differential Revision: https://reviews.llvm.org/D90826
To accommodate frame layouts that have both fixed and scalable objects
on the stack, describing a stack location or offset using a pointer + uint64_t
is not sufficient. For this reason, we've introduced the StackOffset class,
which models both the fixed- and scalable sized offsets.
The TargetFrameLowering::getFrameIndexReference is made to return a StackOffset,
so that this can be used in other interfaces, such as to eliminate frame indices
in PEI or to emit Debug locations for variables on the stack.
This patch is purely mechanical and doesn't change the behaviour of how
the result of this function is used for fixed-sized offsets. The patch adds
various checks to assert that the offset has no scalable component, as frame
offsets with a scalable component are not yet supported in various places.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D90018
The operations in these patterns shouldn't be effected by sign
bits. And the pattern is starting from a sign_extend_inreg so
we aren't expecting sign bits to be passed through either.
Differential Revision: https://reviews.llvm.org/D90739
fsl/fsr take their shift amount in $rs2 or an immediate. The
sources are $rs1 and $rs3.
fshl/fshr ISD opcodes both concatenate operand 0 in the high bits and
operand 1 in the lower bits. fshl returns the high bits after
shifting and fshr returns the low bits. So a shift amount of 0
returns operand 0 for fshl and operand 1 for fshr.
fsl/fsr concatenate their operands in different orders such that
$rs1 will be returned for a shift amount of 0. So $rs1 needs to
come from operand 0 of fshl and operand 1 of fshr.
Differential Revision: https://reviews.llvm.org/D90735
riscv_sllw/srlw only reads the lower 32 bits of the first operand.
And the lower 5 bits of the second operands. Whether the upper
32 bits of the input are sign bits or not doesn't matter.
Also use ineg and not to shorten the patterns.
Differential Revision: https://reviews.llvm.org/D90668
We need to ensure the upper 32 bits of the mask are zero.
So that the srl shifts zeroes into the lower 32 bits.
Differential Revision: https://reviews.llvm.org/D90585
We don't need custom matching, we just a need a predicate to check
the immediate is greater than 32. We can use the existing ImmSub32
to adjust the immediate.
I've also used the new predicate in the other location that used
ImmSub32. I tried to create a test case where we would break without
the greater than 32 check on that pattern, but DAG combine defeated me.
Still seemed safer to have it.
Differential Revision: https://reviews.llvm.org/D90546
DAGCombine doesn't canonicalize rotl/rotr with immediate so we
need patterns for both.
Remove the custom matcher for rotl to RORI and just use a SDNodeXForm
to convert the immediate instead. Doing this gives priority to the
rev32/rev16 versions of grevi over rori since an explicit immediate
is more precise than any immediate. I also added rotr patterns for
rev32/rev16. And removed the (or (shl), (shr)) patterns that should be
combined to rotl by DAG combine.
There is at least one other grev pattern that probably needs a
another rotr pattern, but we need more test coverage first.
Differential Revision: https://reviews.llvm.org/D90575
ADDI often has a frameindex in operand 1, but consumers of this
interface, such as MachineSink, tend to call getReg() on the Destination
and Source operands, leading to the following crash when building
FreeBSD after this implementation was added in 8cf6778d30:
```
clang: llvm/include/llvm/CodeGen/MachineOperand.h:359: llvm::Register llvm::MachineOperand::getReg() const: Assertion `isReg() && "This is not a register operand!"' failed.
PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace, preprocessed source, and associated run script.
Stack dump:
#0 0x00007f4286f9b4d0 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) llvm/lib/Support/Unix/Signals.inc:563:0
#1 0x00007f4286f9b587 PrintStackTraceSignalHandler(void*) llvm/lib/Support/Unix/Signals.inc:630:0
#2 0x00007f4286f9926b llvm::sys::RunSignalHandlers() llvm/lib/Support/Signals.cpp:71:0
#3 0x00007f4286f9ae52 SignalHandler(int) llvm/lib/Support/Unix/Signals.inc:405:0
#4 0x00007f428646ffd0 (/lib/x86_64-linux-gnu/libc.so.6+0x3efd0)
#5 0x00007f428646ff47 raise /build/glibc-2ORdQG/glibc-2.27/signal/../sysdeps/unix/sysv/linux/raise.c:51:0
#6 0x00007f42864718b1 abort /build/glibc-2ORdQG/glibc-2.27/stdlib/abort.c:81:0
#7 0x00007f428646142a __assert_fail_base /build/glibc-2ORdQG/glibc-2.27/assert/assert.c:89:0
#8 0x00007f42864614a2 (/lib/x86_64-linux-gnu/libc.so.6+0x304a2)
#9 0x00007f428d4078e2 llvm::MachineOperand::getReg() const llvm/include/llvm/CodeGen/MachineOperand.h:359:0
#10 0x00007f428d8260e7 attemptDebugCopyProp(llvm::MachineInstr&, llvm::MachineInstr&) llvm/lib/CodeGen/MachineSink.cpp:862:0
#11 0x00007f428d826442 performSink(llvm::MachineInstr&, llvm::MachineBasicBlock&, llvm::MachineInstrBundleIterator<llvm::MachineInstr, false>, llvm::SmallVectorImpl<llvm::MachineInstr*>&) llvm/lib/CodeGen/MachineSink.cpp:918:0
#12 0x00007f428d826e27 (anonymous namespace)::MachineSinking::SinkInstruction(llvm::MachineInstr&, bool&, std::map<llvm::MachineBasicBlock*, llvm::SmallVector<llvm::MachineBasicBlock*, 4u>, std::less<llvm::MachineBasicBlock*>, std::allocator<std::pair<llvm::MachineBasicBlock* const, llvm::SmallVector<llvm::MachineBasicBlock*, 4u> > > >&) llvm/lib/CodeGen/MachineSink.cpp:1073:0
#13 0x00007f428d824a2c (anonymous namespace)::MachineSinking::ProcessBlock(llvm::MachineBasicBlock&) llvm/lib/CodeGen/MachineSink.cpp:410:0
#14 0x00007f428d824513 (anonymous namespace)::MachineSinking::runOnMachineFunction(llvm::MachineFunction&) llvm/lib/CodeGen/MachineSink.cpp:340:0
```
Thus, check that operand 1 is also a register in the condition.
Reviewed By: arichardson, luismarques
Differential Revision: https://reviews.llvm.org/D89090
The code is looking for (sext_inreg (or (shl X, C2), (shr (and Y, C3), C1))).
We need to ensure X and Y are the same.
Differential Revision: https://reviews.llvm.org/D90580
As discussed on D90322, some MSVC builds are failing with is_trivially_copyable static asserts (see D86126) - we can avoid this by not using the std::pair<unsigned,unsigned> which held both the FP+DP Registers, just handle the FP register and convert to DP on the fly.
This reverts 781917254d and recommits
781917254d.
I've changed getRegForInlineAsmConstraint to not use a std::pair
of Register in a previous commit. Hopefully that fixes the reported
issue with expensive checks on Windows. I'm still not sure exactly
why this commit removing an include affected a different file.
Original message:
RISCVRegisterInfo.h is part of the CodeGen layer. The Utils library
is intended to be shared with the MC layer so shouldn't use files
from the CodeGen layer.
The register enum names are already available from
RISCVMCTargetDesc.h. It appears what was coming from this include
was a transitive include of the Register class which I've replaced
with MCRegister. Register has a constructor from MCRegister so it
should be convertible.
The return value of this interface still uses an 'unsigned' on all
targets. So we convert Register back to unsigned at the end.
I'm hoping this will prevent the issue that caused the revert of
D90322.
Just return the new node, which is the standard practice.
I also noticed what appeared to be an unnecessary attempt at
creating an ANY_EXTEND where the type should already be correct.
I replace with an assert to verify the type.
Differential Revision: https://reviews.llvm.org/D90444
This combine makes two calls to SimplifyDemandedBits, one for the LHS and one
for the RHS. If the LHS call returns true, we don't make the RHS call. When
SimplifyDemandedBits makes a change, it will add the nodes around the change to
the DAG combiner worklist. If the simplification happens on the first recursion
step, the N will get added to the worklist. But if the simplification happens
deeper in the recursion, then N will not be revisited until the next time the
DAG combiner runs.
This patch explicitly addes N to the worklist anytime a Simplification is made.
Without this we might miss additional simplifications on the LHS or never
simplify the RHS. Special care also needs to be taken to not add N if it has
been CSEd by the simplification. There are similar examples in DAGCombiner and
the X86 target, but I don't have a test for it for RISC-V. I've also returned
SDValue(N, 0) instead of SDValue() so DAGCombiner knows a change was made and
will update its Statistic variable.
The test here was constructed so that 2 simplifications happen to the LHS.
Without this fix one happens in the post type legalization DAG combine and the
other happens after LegalizeDAG. This prevents the RHS from ever being
simplified causing the left and right shift to clear the upper 32 bits of the
RHS to be left behind.
Differential Revision: https://reviews.llvm.org/D90339
RISCVRegisterInfo.h is part of the CodeGen layer. The Utils library
is intended to be shared with the MC layer so shouldn't use files
from the CodeGen layer.
The register enum names are already available from
RISCVMCTargetDesc.h. It appears what was coming from this include
was a transitive include of the Register class which I've replaced
with MCRegister. Register has a constructor from MCRegister so it
should be convertible.
- The goal of this patch is improve option compatible with RISCV-V GCC,
-mcpu support on GCC side will sent patch in next few days.
- -mtune only affect the pipeline model and non-arch/extension related
target feature, e.g. instruction fusion; in td file it called
TuneFeatures, which is introduced by X86 back-end[1].
- -mtune accept all valid option for -mcpu and extra alias processor
option, e.g. `generic`, `rocket` and `sifive-7-series`, the purpose is
option compatible with RISCV-V GCC.
- Processor alias for -mtune will resolve according the current target arch,
rv32 or rv64, e.g. `rocket` will resolve to `rocket-rv32` or `rocket-rv64`.
- Interaction between -mcpu and -mtune:
* -mtune has higher priority than -mcpu for pipeline model and
TuneFeatures.
[1] https://reviews.llvm.org/D85165
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D89025
Implement vmsge{u}.vx pseudo instruction.
According to RISC-V V specification, there are different scenarios for this
pseudo instruction. I list them below.
unmasked va >= x
pseudoinstruction: vmsge{u}.vx vd, va, x
expansion: vmslt{u}.vx vd, va, x; vmnand.mm vd, vd, vd
masked va >= x, vd != v0
pseudoinstruction: vmsge{u}.vx vd, va, x, v0.t
expansion: vmslt{u}.vx vd, va, x, v0.t; vmxor.mm vd, vd, v0
masked va >= x, vd == v0
pseudoinstruction: vmsge{u}.vx vd, va, x, v0.t, vt
expansion: vmslt{u}.vx vt, va, x; vmandnot.mm vd, vd, vt
Use pseudo instruction to model vmsge{u}.vx. The pseudo instruction will convert
to different expansion according to the condition.
Differential Revision: https://reviews.llvm.org/D84732
Changes TTI function getIntImmCostInst to take an additional Instruction parameter,
which enables us to be able to check it is part of a min(max())/max(min()) pattern that will match SSAT.
We can then mark the constant used as free to prevent it being hoisted so SSAT can still be generated.
Required minor changes in some non-ARM backends to allow for the optional parameter to be included.
Differential Revision: https://reviews.llvm.org/D87457
Scheduling information is of little value when they may disrupt the
pipeline. This patch allows omitting the scheduling information for CSR
instructions while still setting `SchedMachineModel::CompleteModel`. For
specific cases, any scheduling information added will be used by the
scheduler.
Differential revision: https://reviews.llvm.org/D85366
This does not result in changes for any of the current tests, but it might
improve debug information in some cases.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D86522
Currenlty assume x18 is used as pointer to shadow call stack. User shall pass
flags:
"-fsanitize=shadow-call-stack -ffixed-x18"
Runtime supported is needed to setup x18.
If SCS is desired, all parts of the program should be built with -ffixed-x18 to
maintain inter-operatability.
There's no particuluar reason that we must use x18 as SCS pointer. Any register
may be used, as long as it does not have designated purpose already, like RA or
passing call arguments.
Differential Revision: https://reviews.llvm.org/D84414
We weren't using this before, so none of the MachineFunction CFG edges had the
branch probability information added. As a result, block placement later in the
pipeline was flying blind.
This is enabled only with optimizations enabled like SelectionDAG.
Differential Revision: https://reviews.llvm.org/D86824
There's a special case in hasAttribute for None when pImpl is null. If pImpl is not null we dispatch to pImpl->hasAttribute which will always return false for Attribute::None.
So if we just want to check for None its sufficient to just check that pImpl is null. Which can even be done inline.
This patch adds a helper for that case which I hope will speed up our getSubtargetImpl implementations.
Differential Revision: https://reviews.llvm.org/D86744
Since the canonical floatig-point move is fsgnj rd, rs, rs, we should
handle this case in RISCVInstrInfo::isAsCheapAsAMove().
Reviewed By: lenary
Differential Revision: https://reviews.llvm.org/D86518
The isTriviallyRematerializable hook is only called for instructions that are
tagged as isAsCheapAsAMove. Since ADDI 0 is used for "mv" it should definitely
be marked with "isAsCheapAsAMove". This change avoids one stack spill in most of
the atomic-rmw.ll tests functions. It also avoids stack spills in two of our
out-of-tree CHERI tests.
ORI/XORI with zero may or may not be the same as a move micro-architecturally,
but since we are already doing it for register == x0, we might as well
do the same if the immediate is zero.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D86480
Implements the assemble and disassemble support of RISCV Vector
extension zvamo instructions, base on the 0.9 spec version.
Reviewed by HsiangKai
Differential Revision: https://reviews.llvm.org/D85069
PseudoBRIND had seemingly inherited incorrect annotations denoting it as
a call instruction and that it defines X1/ra. This caused excess
save/restore code to be emitted for ra.
Differential Revision: https://reviews.llvm.org/D86286
In SelectionDAGBuilder always translate the fshl and fshr intrinsics to
FSHL and FSHR (or ROTL and ROTR) instead of lowering them to shifts and
ORs. Improve the legalization of FSHL and FSHR to avoid code quality
regressions.
Differential Revision: https://reviews.llvm.org/D77152
This ensures that we never encode an instruction which is unavailable,
such as if we explicitly insert a forbidden instruction when lowering.
This is particularly important on RISC-V given its high degree of
modularity, and will become increasingly important as new standard
extensions appear.
Reviewed By: asb, lenary
Differential Revision: https://reviews.llvm.org/D85015
This implements the assemble and disassemble support of RISCV Vector
extension Zvlsseg instructions, base on the 0.9 spec version.
Reviewed by HsiangKai
Differential Revision: https://reviews.llvm.org/D84416
The RISC-V Privileged Specification 1.11 defines `mcountinhibit`, which
has the same numeric CSR value as `mucounteren` from 1.09.1. This patch
enables the use of the old `mucounteren` name.
Patch by Yuichi Sugiyama.
Reviewed By: lenary, jrtc27, pzheng
Differential Revision: https://reviews.llvm.org/D85067
This fixes the "Unable to insert indirect branch" fatal error sometimes
seen when generating position-independent code.
Patch by msizanoen1
Reviewed By: jrtc27
Differential Revision: https://reviews.llvm.org/D84833
This patch implements initial backend support for a -mtune CPU controlled by a "tune-cpu" function attribute. If the attribute is not present X86 will use the resolved CPU from target-cpu attribute or command line.
This patch adds MC layer support a tune CPU. Each CPU now has two sets of features stored in their GenSubtargetInfo.inc tables . These features lists are passed separately to the Processor and ProcessorModel classes in tablegen. The tune list defaults to an empty list to avoid changes to non-X86. This annoyingly increases the size of static tables on all target as we now store 24 more bytes per CPU. I haven't quantified the overall impact, but I can if we're concerned.
One new test is added to X86 to show a few tuning features with mismatched tune-cpu and target-cpu/target-feature attributes to demonstrate independent control. Another new test is added to demonstrate that the scheduler model follows the tune CPU.
I have not added a -mtune to llc/opt or MC layer command line yet. With no attributes we'll just use the -mcpu for both. MC layer tools will always follow the normal CPU for tuning.
Differential Revision: https://reviews.llvm.org/D85165
Summary:
1. gcc uses `-march` and `-mtune` flag to chose arch and
pipeline model, but clang does not have `-mtune` flag,
we uses `-mcpu` to chose both infos.
2. Add SiFive e31 and u54 cpu which have default march
and pipeline model.
3. Specific `-mcpu` with rocket-rv[32|64] would select
pipeline model only, and use the driver's arch choosing
logic to get default arch.
Reviewers: lenary, asb, evandro, HsiangKai
Reviewed By: lenary, asb, evandro
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D71124
This patch provides optimization of bit manipulation operations by
enabling the +experimental-b target feature.
It adds matching of single block patterns of instructions to specific
bit-manip instructions from the ternary subset (zbt subextension) of the
experimental B extension of RISC-V.
It adds also the correspondent codegen tests.
This patch is based on Claire Wolf's proposal for the bit manipulation
extension of RISCV:
https://github.com/riscv/riscv-bitmanip/blob/master/bitmanip-0.92.pdf
Differential Revision: https://reviews.llvm.org/D79875
This patch provides optimization of bit manipulation operations by
enabling the +experimental-b target feature.
It adds matching of single block patterns of instructions to specific
bit-manip instructions from the single-bit subset (zbs subextension) of
the experimental B extension of RISC-V.
It adds also the correspondent codegen tests.
This patch is based on Claire Wolf's proposal for the bit manipulation
extension of RISCV:
https://github.com/riscv/riscv-bitmanip/blob/master/bitmanip-0.92.pdf
Differential Revision: https://reviews.llvm.org/D79874
This patch provides optimization of bit manipulation operations by
enabling the +experimental-b target feature.
It adds matching of single block patterns of instructions to specific
bit-manip instructions belonging to both the permutation and the base
subsets of the experimental B extension of RISC-V.
It adds also the correspondent codegen tests.
This patch is based on Claire Wolf's proposal for the bit manipulation
extension of RISCV:
https://github.com/riscv/riscv-bitmanip/blob/master/bitmanip-0.92.pdf
Differential Revision: https://reviews.llvm.org/D79873
This patch provides optimization of bit manipulation operations by
enabling the +experimental-b target feature.
It adds matching of single block patterns of instructions to specific
bit-manip instructions from the permutation subset (zbp subextension) of
the experimental B extension of RISC-V.
It adds also the correspondent codegen tests.
This patch is based on Claire Wolf's proposal for the bit manipulation
extension of RISCV:
https://github.com/riscv/riscv-bitmanip/blob/master/bitmanip-0.92.pdf
Differential Revision: https://reviews.llvm.org/D79871
This patch provides optimization of bit manipulation operations by
enabling the +experimental-b target feature.
It adds matching of single block patterns of instructions to specific
bit-manip instructions from the base subset (zbb subextension) of the
experimental B extension of RISC-V.
It adds also the correspondent codegen tests.
This patch is based on Claire Wolf's proposal for the bit manipulation
extension of RISCV:
https://github.com/riscv/riscv-bitmanip/blob/master/bitmanip-0.92.pdf
Differential Revision: https://reviews.llvm.org/D79870
Summary:
Without these, the generic branch relaxation pass will underestimate the
range required for branches spanning these and we can end up with
"fixup value out of range" errors rather than relaxing the branches.
Some of the instructions in the expansion may end up being compressed
but exactly determining that is awkward, and these conservative values
should be safe, if slightly suboptimal in rare cases.
Reviewers: asb, lenary, luismarques, lewis-revill
Reviewed By: asb, luismarques
Subscribers: hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, jfb, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, evandro, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77443
Because of the layout of stores (that don't have a destination operand)
this check is exactly the same as the one in
RISCVInstrInfo::isLoadFromStackSlot.
Differential Revision: https://reviews.llvm.org/D81805
The GlobalISelEmitter is stricter about matching timm instruction
outputs to timm inputs (although in an accidental sort of way that
doesn't hit a proper import failure error). Also, apparently no
intrinsic patterns were importing since the ID enum declaration was
missing.
Since the `RISCVExpandPseudo` pass has been split from
`RISCVExpandAtomicPseudo` pass, it would be nice to run the former as
early as possible (The latter has to be run as late as possible to
ensure correctness). Running earlier means we can reschedule these pairs
as we see fit.
Running earlier in the machine pass pipeline is good, but would mean
teaching many more passes about `hasLabelMustBeEmitted`. Splitting the
basic blocks also pessimises possible optimisations because some
optimisations are MBB-local, and others are disabled if the block has
its address taken (which is notionally what `hasLabelMustBeEmitted`
means).
This patch uses a new approach of setting the pre-instruction symbol on
the AUIPC instruction to a temporary symbol and referencing that. This
avoids splitting the basic block, but allows us to reference exactly the
instruction that we need to. Notionally, this approach seems more
correct because we do actually want to address a specific instruction.
This then allows the pass to be moved much earlier in the pass pipeline,
before both scheduling and register allocation. However, to do so we
must leave the MIR in SSA form (by not redefining registers), and so use
a virtual register for the intermediate value. By using this virtual
register, this pass now has to come before register allocation.
Reviewed By: luismarques, asb
Differential Revision: https://reviews.llvm.org/D82988
For an addition with an immediate in specific ranges, a pair of
addi-addi can be generated instead of the ordinary lui-addi-add serial.
Reviewed By: MaskRay, luismarques
Differential Revision: https://reviews.llvm.org/D82262
... to shift/add or shift/sub.
Do not enable it on riscv32 with the M extension where decomposeMulByConstant
may not be an optimization.
Reviewed By: luismarques, MaskRay
Differential Revision: https://reviews.llvm.org/D82660
We can often fold an ADDI into the offset of load/store instructions:
(load (addi base, off1), off2) -> (load base, off1+off2)
(store val, (addi base, off1), off2) -> (store val, base, off1+off2)
This is possible when the off1+off2 continues to fit the 12-bit immediate.
We remove the previous restriction where we would never fold the ADDIs if
the load/stores had nonzero offsets. We now do the fold the the resulting
constant still fits a 12-bit immediate, or if off1 is a variable's address
and we know based on that variable's alignment that off1+offs2 won't overflow.
Differential Revision: https://reviews.llvm.org/D79690
The pass to split atomic and non-atomic RISC-V pseudo-instructions was itself
split into two passes in D79635 / commit rG2cb0644f90b7, with the splitting of
non-atomic instructions being moved to the PreSched2 phase. A comment was
added to D79635 detailing a case where this caused problems, so this commit
moves the non-atomic split pass back to the PreEmitPass2 phase. This allows
the bulk of the changes from D79635 to remain committed, while addressing the
the reported problem (the pass split is now almost NFC). Once the root problem
is fixed we can move the (non-atomic) instruction splitting pass back to
earlier in the pipeline.
The pass to split atomic and non-atomic RISC-V pseudo-instructions was itself
split into two passes in D79635 / commit rG2cb0644f90b7, with the splitting of
non-atomic instructions being moved to the PreSched2 phase. A comment was
added to D79635 detailing a case where this caused problems, so this commit
moves the non-atomic split pass back to the PreEmitPass2 phase. This allows
the bulk of the changes from D79635 to remain committed, while addressing the
the reported problem (the pass split is now almost NFC). Once the root problem
is fixed we can move the (non-atomic) instruction splitting pass back to
earlier in the pipeline.
Summary:
This implements two hooks that attempt to avoid control flow for RISC-V. RISC-V
will lower SELECTs into control flow, which is not a great idea.
The hook `hasMultipleConditionRegisters()` turns off the following
DAGCombiner folds:
select(C0|C1, x, y) <=> select(C0, x, select(C1, x, y))
select(C0&C1, x, y) <=> select(C0, select(C1, x, y), y)
The second hook `setJumpIsExpensive` controls a flag that has a similar purpose
and is used in CodeGenPrepare and the SelectionDAGBuilder.
Both of these have the effect of ensuring more logic is done before fewer jumps.
Note: with the `B` extension, we may be able to lower select into a conditional
move instruction, so at some point these hooks will need to be guarded based on
enabled extensions.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D79268
Extracts the atomic pseudo-instructions' splitting from `riscv-expand-pseudo`
/ `RISCVExpandPseudo` into its own pass, `riscv-expand-atomic-pseudo` /
`RISCVExpandAtomicPseudo`. This allows for the expansion of atomic operations
to continue to happen late (the new pass is added in `addPreEmitPass2`, so
those expansions continue to happen in the same place), while the remaining
pseudo-instructions can now be expanded earlier and benefit from more
optimization passes. The nonatomics pass is now added in `addPreSched2`.
Differential Revision: https://reviews.llvm.org/D79635
Assemble/disassemble RISC-V V extension instructions according to
latest version spec in https://github.com/riscv/riscv-v-spec/.
I have tested this patch using GNU toolchain. The encoding is aligned
to GNU assembler output. In this patch, there is a test case for each
instruction at least.
The V register definition is just for assemble/disassemble. Its type
is not important in this stage. I think it will be reviewed and modified
as we want to do codegen for scalable vector types.
This patch does not include Zvamo, Zvlsseg, and Zvediv.
Differential revision: https://reviews.llvm.org/D69987
Since i32 is not legal in riscv64,
it always promoted to i64 before emitting lib call and
for conversions like float/double to int and float/double to unsigned int
wrong lib call was emitted. This commit fix it using custom lowering.
Differential Revision: https://reviews.llvm.org/D80526
Currently, some fairly arbitrary subset of overriden methods in
RISCVISelLowering are private rather than public (which is the
visibility they have in TargetLowering). I suspect this is a holdover
from too closely copying another backend.
D78545 pointed out this can be difficult for some downstream patches,
and nobody has come forward to suggest a reason for keeping the
visibility as-is.
This commit simply makes all overridden methods match the public
visiblity of the parent.
Differential Revision: https://reviews.llvm.org/D79928
Let the codegen recognized the nomerge attribute and disable branch folding when the attribute is given
Differential Revision: https://reviews.llvm.org/D79537
Summary:
RISC-V uses a post-select peephole pass to optimise
`(load/store (ADDI $reg, %lo(addr)), 0)` into `(load/store $reg, %lo(addr))`.
This peephole wasn't firing for accesses to constant pools, which is how we
materialise most floating point constants.
This adds support for the constantpool case, which improves code generation for
lots of small FP loading examples. I have not added any tests because this
structure is well-covered by the `fp-imm.ll` testcases, as well as almost
all other uses of floating point constants in the RISC-V backend tests.
Reviewed By: luismarques, asb
Differential Revision: https://reviews.llvm.org/D79523
Summary:
RISC-V uses a post-select peephole pass to optimise
`(load/store (ADDI $reg, %lo(addr)), 0)` into `(load/store $reg, %lo(addr))`.
This peephole wasn't firing for accesses to constant pools, which is how we
materialise most floating point constants.
This adds support for the constantpool case, which improves code generation for
lots of small FP loading examples. I have not added any tests because this
structure is well-covered by the `fp-imm.ll` testcases, as well as almost
all other uses of floating point constants in the RISC-V backend tests.
Reviewed By: luismarques, asb
Differential Revision: https://reviews.llvm.org/D79523
This patch stores the alignment for ConstantPoolSDNode as an
Align and updates the getConstantPool interface to take a MaybeAlign.
Removing getAlignment() will be done as a follow up.
Differential Revision: https://reviews.llvm.org/D79436
Summary:
The RISC-V debug register was named dscratch in a previous draft of the RISC-V
debug mode spec. The number of registers has been increased to 2 in the latest
ratified version of the debug mode spec and the registers were named dscratch0
and dscratch1. We still support using the old register name "dscratch", but it
would be disassembled as "dscratch0" with this change.
Reviewers: apazos, asb, lenary, luismarques
Reviewed By: asb
Subscribers: hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, sameer.abuasal, evandro, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78764
Make the kind of cost explicit throughout the cost model which,
apart from making the cost clear, will allow the generic parts to
calculate better costs. It will also allow some backends to
approximate and correlate the different costs if they wish. Another
benefit is that it will also help simplify the cost model around
immediate and intrinsic costs, where we currently have multiple APIs.
RFC thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-April/141263.html
Differential Revision: https://reviews.llvm.org/D79002
Summary:
The current lowering of `select` on RISC-V uses a branch instruction to load a
register with one or other value. This is inefficient, especially in the case of
small constants that can be computed easily.
By implementing the TargetLowering::convertSelectOfConstantsToMath hook, some of
the simpler cases are covered that let us avoid introducing a branch in these
cases.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D79260
Summary:
This patch addresses some weird assembly sequences we were seeing during
comparing floats. In particular, comparing a float to itself tells you whether
it is NaN or not, which we were doing correctly, but with an extra unneeded
`and` instruction.
This patch specialises the existing patterns to remove the `and` instructions
when both their operands are the same.
Reviewed By: luismarques, asb
Differential Revision: https://reviews.llvm.org/D78908
Preserving liveness can be useful even late in the pipeline, if we're
doing substantial optimization work afterwards. (See, for example,
D76065.) Teach MachineOutliner how to correctly set live-ins on the
basic block in outlined functions.
Differential Revision: https://reviews.llvm.org/D78605
Summary:
Before this patch, `relaxInstruction` takes three arguments, the first
argument refers to the instruction before relaxation and the third
argument is the output instruction after relaxation. There are two quite
strange things:
1) The first argument's type is `const MCInst &`, the third
argument's type is `MCInst &`, but they may be aliased to the same
variable
2) The backends of ARM, AMDGPU, RISC-V, Hexagon assume that the third
argument is a fresh uninitialized `MCInst` even if `relaxInstruction`
may be called like `relaxInstruction(Relaxed, STI, Relaxed)` in a
loop.
In this patch, we drop the thrid argument, and let `relaxInstruction`
directly modify the given instruction. Also, this patch fixes the bug https://bugs.llvm.org/show_bug.cgi?id=45580, which is introduced by D77851, and
breaks the assumption of ARM, AMDGPU, RISC-V, Hexagon.
Reviewers: Razer6, MaskRay, jyknight, asb, luismarques, enderby, rtaylor, colinl, bcain
Reviewed By: Razer6, MaskRay, bcain
Subscribers: bcain, nickdesaulniers, nathanchance, wuzish, annita.zhang, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, tpr, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78364
This adds the instruction encoding and mnenomics for the proposed
RISC-V Bit Manipulation extension (version 0.92). It is implemented with
each category of instruction as its own target feature, with the 'b'
extension feature enabling all options. Since this extension is not yet
ratified, all target features are prefixed with 'experimental-' to note
their status.
Differential Revision: https://reviews.llvm.org/D65649
This implements the instruction analysis required to print branch
targets as part of llvm-objdump's disassembly.
Note, this only handles those branches which can be analyzed in a single
instruction, a future patch will handle multiple-instruction patterns,
such as AUIPC/LUI+JALR instruction pairs.
Differential Revision: https://reviews.llvm.org/D77567
Summary:
Currently, the comparison argument used for ATOMIC_CMP_XCHG is legalised
with GetPromotedInteger, which leaves the upper bits of the value
undefind. Since this is used for comparing in an LR/SC loop with a
full-width comparison, we must sign extend it. We introduce a new
getExtendForAtomicCmpSwapArg to complement getExtendForAtomicOps, since
many targets have compare-and-swap instructions (or pseudos) that
correctly handle an any-extend input, and the existing function
determines the extension of the result, whereas we are concerned with
the input.
This is related to https://reviews.llvm.org/D58829, which solved the
issue for ATOMIC_CMP_SWAP_WITH_SUCCESS, but not the simpler
ATOMIC_CMP_SWAP.
Reviewers: asb, lenary, efriedma
Reviewed By: asb
Subscribers: arichardson, hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, jfb, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, evandro, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74453
For the downstream RISCV maintenance, it would be easier to inherent
RISCVISelDAGToDAG by including header and only override the method that needs
to be customized for the provider non-standard ISA extension without touching
RISCVISelDAGToDAG.cpp which may cause conflict when upgrading the downstream
LLVM version.
Differential Revision: https://reviews.llvm.org/D77117
Leverage ARM ELF build attribute section to create ELF attribute section
for RISC-V. Extract the common part of parsing logic for this section
into ELFAttributeParser.[cpp|h] and ELFAttributes.[cpp|h].
Differential Revision: https://reviews.llvm.org/D74023
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jyknight, sdardis, nemanjai, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, jfb, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77059
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: dylanmckay, sdardis, nemanjai, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76551
-fuse-init-array is now the CC1 default but TargetLoweringObjectFileELF::UseInitArray still defaults to false.
The following two unknown OS target triples continue using .ctors/.dtors because InitializeELF is not called.
clang -target i386 -c a.c
clang -target x86_64 -c a.c
This cleanup fixes this as a bonus.
X86SpeculativeLoadHardeningPass::tracePredStateThroughCall can call
MCContext::createTempSymbol before TargetLoweringObjectFileELF::Initialize().
We need to call TargetLoweringObjectFileELF::Initialize() ealier.
test/CodeGen/X86/speculative-load-hardening-indirect.ll
Differential Revision: https://reviews.llvm.org/D71360
UseInitArray is now the CC1 default but TargetLoweringObjectFileELF::UseInitArray still defaults to false.
The following two unknown OS target triples continue using .ctors/.dtors because InitializeELF is not called.
clang -target i386 -c a.c
clang -target x86_64 -c a.c
This cleanup fixes this as a bonus.
Differential Revision: https://reviews.llvm.org/D71360
This reverts commit e9f22fd429.
When building with -DLLVM_USE_SANITIZER="Thread", check-llvm has 70
failing tests with this revision, and 29 without this revision.
Floating point positive zero can be selected using fmv.w.x / fmv.d.x /
fcvt.d.w and the zero source register.
Differential Revision: https://reviews.llvm.org/D75729
This patch generates TableGen descriptions for the specified register
banks which contain a list of register sizes corresponding to the
available HwModes. The appropriate size is used during codegen according
to the current HwMode. As this HwMode was not available on generation,
it is set upon construction of the RegisterBankInfo class. Targets
simply need to provide the HwMode argument to the
<target>GenRegisterBankInfo constructor.
The RISC-V RegisterBankInfo constructor has been updated accordingly
(plus an unused argument removed).
Differential Revision: https://reviews.llvm.org/D76007
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jholewinski, arsenm, dschuff, jyknight, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76348
For context, the proposed RISC-V bit manipulation extension has a subset
of instructions which require one of two SubtargetFeatures to be
enabled, 'zbb' or 'zbp', and there is no defined feature which both of
these can imply to use as a constraint either (see comments in D65649).
AssemblerPredicates allow multiple SubtargetFeatures to be declared in
the "AssemblerCondString" field, separated by commas, and this means
that the two features must both be enabled. There is no equivalent to
say that _either_ feature X or feature Y must be enabled, short of
creating a dummy SubtargetFeature for this purpose and having features X
and Y imply the new feature.
To solve the case where X or Y is needed without adding a new feature,
and to better match a typical TableGen style, this replaces the existing
"AssemblerCondString" with a dag "AssemblerCondDag" which represents the
same information. Two operators are defined for use with
AssemblerCondDag, "all_of", which matches the current behaviour, and
"any_of", which adds the new proposed ORing features functionality.
This was originally proposed in the RFC at
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139138.html
Changes to all current backends are mechanical to support the replaced
functionality, and are NFCI.
At this stage, it is illegal to combine features with ands and ors in a
single AssemblerCondDag. I suspect this case is sufficiently rare that
adding more complex changes to support it are unnecessary.
Differential Revision: https://reviews.llvm.org/D74338
The patch fixes some typos and introduces ReadFMemBase, ReadFSGNJ32,
ReadFSGNJ64, WriteFSGNJ32, WriteFSGNJ64, ReadFMinMax32, ReadFMinMax64,
WriteFMinMax32, WriteFMinMax64, so the target CPU with different pipeline model
could use them to describe latency.
Differential Revision: https://reviews.llvm.org/D75515
When running under LTO, it is common to not specify the architecture
spec, which is used for setting up the target machine, and instead rely
on features specified in each function to generate the correct
instructions.
This works for the code generator, but the RISC-V backend uses the
AsmPrinter to do instruction compression, which does not see these
features but instead uses a MCSubtargetInfo object to see whether
compression is enabled. Since this is configured based on the
TargetMachine at startup, it will result in compressed instructions not
being emitted when it has not been given the 'c' TargetFeature, but the
function has it.
This changes the RISCVAsmPrinter to re-initialize the STI feature set
based on the current MachineFunction, such that compressed instructions
are now correctly emitted regardless of the method used to enable them.
Differential revision: https://reviews.llvm.org/D73339
Implement TargetLowering callback mayBeEmittedAsTailCall for riscv in CodeGenPrepare,
which will duplicate return instructions to enable tailcall optimization.
Differential Revision: https://reviews.llvm.org/D73699
CallPreservedMask is used to describe the register liveness after a
function call. The function call in an interrupt handler should use the same
CallPreservedMask as normal functions. So that only callee save registers
can live through the function call.
This patch adds the support required for using the __riscv_save and
__riscv_restore libcalls to implement a size-optimization for prologue
and epilogue code, whereby the spill and restore code of callee-saved
registers is implemented by common functions to reduce code duplication.
Logic is also included to ensure that if both this optimization and
shrink wrapping are enabled then the prologue and epilogue code can be
safely inserted into the basic blocks chosen by shrink wrapping.
Differential Revision: https://reviews.llvm.org/D62686
Summary:
Add a new method (tryParseRegister) that attempts to parse a register specification.
MASM allows the use of IFDEF <register>, as well as IFDEF <symbol>. To accommodate this, we make it possible to check whether a register specification can be parsed at the current location, without failing the entire parse if it can't.
Reviewers: thakis
Reviewed By: thakis
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73486
ADDI(C.ADDI) may achieve better code size than XORI, since XORI has no C extension.
This patch transforms two patterns and gets almost equivalent results.
Differential Revision: https://reviews.llvm.org/D71774
When the FP exists, the FP base CFI directive offset should take the size of variable arguments into account.
Differential Revision: https://reviews.llvm.org/D73862
Remove code from LegalizeTypes that allowed this to work.
We were already using BUILD_PAIR for this in some places so this
standardizes on a single way to do this.
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, jyknight, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73885
Summary:
Implements the jump pseudo-instruction, which is used in e.g. the Linux kernel.
Reviewers: asb, lenary
Reviewed By: lenary
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73178
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Pipeline scheduler model for the RISC-V Rocket micro-architecture using the
MIScheduler interface. Support for both 32 and 64-bit Rocket cores is
implemented.
Differential revision: https://reviews.llvm.org/D68685
Summary:
Previously, we would erroneously turn %pcrel_lo(label), where label has
a %pcrel_hi against a weak symbol, into %pcrel_lo(label + offset), as
evaluatePCRelLo would believe the target independent logic was going to
fold it. Moreover, even if that were fixed, shouldForceRelocation lacks
an MCAsmLayout and thus cannot evaluate the %pcrel_hi fixup to a value
and check the symbol, so we would then erroneously constant-fold the
%pcrel_lo whilst leaving the %pcrel_hi intact. After D72197, this same
sequence also occurs for symbols with global binding, which is triggered
in real-world code.
Instead, as discussed in D71978, we introduce a new FKF_IsTarget flag to
avoid these kinds of issues. All the resolution logic happens in one
place, with no coordination required between RISCAsmBackend and
RISCVMCExpr to ensure they implement the same logic twice. Although the
implementation of %pcrel_hi can be left as target independent, we make
it target dependent to ensure that they are handled identically to
%pcrel_lo, otherwise we risk one of them being constant folded but the
other being preserved. This also allows us to properly support fixup
pairs where the instructions are in different fragments.
Reviewers: asb, lenary, efriedma
Reviewed By: efriedma
Subscribers: arichardson, hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73211
1. if users don't specific -mattr, the default target-feature come
from IR attribute.
2. fixed bug and re-land this patch
Reviewers: lenary, asb
Reviewed By: lenary
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70837
These names have been changed from CamelCase to camelCase, but there were
many places (comments mostly) that still used the old names.
This change is NFC.
Except AMDGPU/R600RegisterInfo (a bunch of MIR tests seem to have
problems), every target overrides it with true. PostMachineScheduler
requires livein information. Not providing it can cause assertion
failures in ScheduleDAGInstrs::addSchedBarrierDeps().
This include file was created in October and has a "using namespace llvm". This seems to get exposed to other include files and finally onto cpp files. While this somewhat okay for llvm itself, its bad for other projects that use llvm as a library and includes a header file that picks this up. This was found by ISPC which has some class names at gloal scope with the same names as LLVM.
It looks like RISCV accidentally became dependent on this. I fixed it by reordering some includes in the RISCV code, but maybe we want to change the TableGenEmitter to put "namespace llvm {" in the generated file instead? But we probably want to do the simplest thing first so we can merge it to 10.0.
Differential Revision: https://reviews.llvm.org/D72895
if users don't specific -mattr, the default target-feature come
from IR attribute.
Reviewers: lenary, asb
Reviewed By: lenary, asb
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70837
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: merge_guards_bot, luismarques, smeenai, ldionne, lenary, s.egerton, pzheng, sameer.abuasal, MaskRay, wuzish, echristo, Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
Enabling shrink wrapping requires ensuring the insertion point of the
epilogue is correct for MBBs without a terminator, in which case the
instruction to adjust the stack pointer is the last instruction in the
block.
Differential Revision: https://reviews.llvm.org/D62190
Summary: These seem to be the machine operand types currently needed by the
RISC-V target.
Reviewers: asb, lenary
Reviewed By: lenary
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72275
Summary:
It is useful to keep statistics on how many instructions we have
compressed, so we can see if future changes are increasing or decreasing this
number.
Reviewers: asb, luismarques
Reviewed By: asb, luismarques
Subscribers: xbolva00, sameer.abuasal, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67495
Summary:
AMO memory operands use a custom parser in order to accept both (reg)
and 0(reg). However, the validation predicate used for these operands
was only checking that they were registers, and not the register class,
so non-GPRs (such as FPRs) were also accepted. Thus, fix this by making
the predicate check that they are GPRs.
Reviewers: asb, lenary
Reviewed By: asb, lenary
Subscribers: hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72471
The argument is llvm::null() everywhere except llvm::errs() in
llvm-objdump in -DLLVM_ENABLE_ASSERTIONS=On builds. It is used by no
target but X86 in -DLLVM_ENABLE_ASSERTIONS=On builds.
If we ever have the needs to add verbose log to disassemblers, we can
record log with a member function, instead of passing it around as an
argument.
Only PPC seems to be using it, and only checks some simple cases and
doesn't distinguish between FP. Just switch to using LLT to simplify
use from GlobalISel.
Summary:
This is analogous to D58943, which correctly finds the corresponding
fixup. However, when linker relaxations are disabled and we evaluate the
fixup, we need to also ensure we use an offset of 0 rather than the size
of the previous fragment.
Reviewers: asb, efriedma, lenary
Reviewed By: efriedma
Subscribers: hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71978
printInst prints a branch/call instruction as `b offset` (there are many
variants on various targets) instead of `b address`.
It is a convention to use address instead of offset in most external
symbolizers/disassemblers. This difference makes `llvm-objdump -d`
output unsatisfactory.
Add `uint64_t Address` to printInst(), so that it can pass the argument to
printInstruction(). `raw_ostream &OS` is moved to the last to be
consistent with other print* methods.
The next step is to pass `Address` to printInstruction() (generated by
tablegen from the instruction set description). We can gradually migrate
targets to print addresses instead of offsets.
In any case, downstream projects which don't know `Address` can pass 0 as
the argument.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D72172
When the "disable-tail-calls" attribute was added, checks were added for
it in various backends. Now this code has proliferated, and it is
something the target is responsible for checking. Move that
responsibility back to the ISels (fast, global, and SD).
There's no major functionality change, except for targets that never
implemented this check.
This LLVM attribute was originally added in
d9699bc7bd (2015).
Reviewers: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D72118
This allows us to delete InlineAsm::Constraint_i workarounds in
SelectionDAGISel::SelectInlineAsmMemoryOperand overrides and
TargetLowering::getInlineAsmMemConstraint overrides.
They were introduced to X86 in r237517 to prevent crashes for
constraints like "=*imr". They were later copied to other targets.
Summary: Instead of crashing due to the `llvm_unreachable`, provide a proper
error when invalid fixups/relocations are encountered.
Reviewers: asb, lenary
Reviewed By: asb
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71536
This patch enables the machine outliner for RISC-V and adds the
necessary logic for checking whether sequences can be safely outlined,
and describing how they should be outlined. Outlined functions are
called using the register t0 (x5) as the return address register, which
must be available for an occurrence of a sequence to be safely outlined.
Differential Revision: https://reviews.llvm.org/D66210
expected failed test (RV32IF-ILP32F) will be fixed in a subsequent patch.
Reviewers: efriedma, lenary, asb
Reviewed By: efriedma, lenary
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70116
This fixes an assertion failure that triggers inside
getMemOperandWithOffset when Machine Sinking calls it on a MachineInstr
that is not a memory operation.
Different backends implement getMemOperandWithOffset differently: some
return false on non-memory MachineInstrs, others assert.
The Machine Sinking pass in at least SinkingPreventsImplicitNullCheck
relies on getMemOperandWithOffset to return false on non-memory
MachineInstrs, instead of asserting.
This patch updates the documentation on getMemOperandWithOffset that it
should return false on any MachineInstr it cannot handle, instead of
asserting. It also adapts the in-tree backends accordingly where
necessary.
Differential Revision: https://reviews.llvm.org/D71359
Currently -fuse-init-array option is not effective when target triple
does not specify os, on x86,x86_64.
i.e.
// -fuse-init-array is not honored.
$ clang -target i386 -fuse-init-array test.c -S
// -fuse-init-array is honored.
$ clang -target i386-linux -fuse-init-array test.c -S
This patch fixes first case.
And does cleanup.
Reviewers: rnk, craig.topper, fhahn, echristo
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D71360
Summary:
This copy ensures that debug location information is kept for
compressed instructions. There are places where both compressInstruction and
uncompressInstruction are called that were not doing this copy, discarding some
debug info.
This change merely moves the copy into the generated file, so you cannot forget
to copy the location over when compressing or uncompressing.
Reviewers: asb, luismarques
Reviewed By: luismarques
Subscribers: sameer.abuasal, aprantl, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67493
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
object file size.
- Incremental step towards decoupling target intrinsics.
The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.
Part of PR34259
Reviewers: efriedma, echristo, MaskRay
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D71320
Soon Intrinsic::ID will be a plain integer, so this overload will not be
possible.
Rename both overloads to ensure that downstream targets observe this as
a build failure instead of a runtime failure.
Split off from D71320
Reviewers: efriedma
Differential Revision: https://reviews.llvm.org/D71381
This adds support for printing improved missing feature error messages
from the assembler, which now indicates which feature caused the parse
to fail.
Differential Revision: https://reviews.llvm.org/D69899
Summary:
Forcing Local Exec TLS requires the use of copy relocations. Copy
relocations need special handling in the runtime linker when being used
against TLS symbols, which is present in glibc, but not in FreeBSD nor
musl, and so cannot be relied upon. Moreover, copy relocations are a
hack that embed the size of an object in the ABI when it otherwise
wouldn't be, and break protected symbols (which are expected to be DSO
local), whilst also wasting space, thus they should be avoided whenever
possible. As discussed in D70398, RISC-V should move away from forcing
Local Exec, and instead use Initial Exec like other targets, with
possible linker relaxation to follow. The RISC-V GCC maintainers also
intend to adopt this more-conventional behaviour (see
https://github.com/riscv/riscv-elf-psabi-doc/issues/122).
Reviewers: asb, MaskRay
Reviewed By: MaskRay
Subscribers: emaste, krytarowski, hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, llvm-commits, bsdjhb
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70649
Summary: Adds tablegen patterns to explicitly handle fcopysign where the
magnitude and sign arguments have different types, due to the sign value casts
being removed the by DAGCombiner. Support for RV32IF follows in a separate
commit. Adds tests for all relevant scenarios except RV32IF.
Reviewers: lenary
Reviewed By: lenary
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70678
Summary:
Most libraries are defined in the lib/ directory but there are also a
few libraries defined in tools/ e.g. libLLVM, libLTO. I'm defining
"Component Libraries" as libraries defined in lib/ that may be included in
libLLVM.so. Explicitly marking the libraries in lib/ as component
libraries allows us to remove some fragile checks that attempt to
differentiate between lib/ libraries and tools/ libraires:
1. In tools/llvm-shlib, because
llvm_map_components_to_libnames(LIB_NAMES "all") returned a list of
all libraries defined in the whole project, there was custom code
needed to filter out libraries defined in tools/, none of which should
be included in libLLVM.so. This code assumed that any library
defined as static was from lib/ and everything else should be
excluded.
With this change, llvm_map_components_to_libnames(LIB_NAMES, "all")
only returns libraries that have been added to the LLVM_COMPONENT_LIBS
global cmake property, so this custom filtering logic can be removed.
Doing this also fixes the build with BUILD_SHARED_LIBS=ON
and LLVM_BUILD_LLVM_DYLIB=ON.
2. There was some code in llvm_add_library that assumed that
libraries defined in lib/ would not have LLVM_LINK_COMPONENTS or
ARG_LINK_COMPONENTS set. This is only true because libraries
defined lib lib/ use LLVMBuild.txt and don't set these values.
This code has been fixed now to check if the library has been
explicitly marked as a component library, which should now make it
easier to remove LLVMBuild at some point in the future.
I have tested this patch on Windows, MacOS and Linux with release builds
and the following combinations of CMake options:
- "" (No options)
- -DLLVM_BUILD_LLVM_DYLIB=ON
- -DLLVM_LINK_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_BUILD_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_LINK_LLVM_DYLIB=ON
Reviewers: beanz, smeenai, compnerd, phosek
Reviewed By: beanz
Subscribers: wuzish, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, mgorny, mehdi_amini, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, dang, Jim, lenary, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70179
Summary:
The RISC-V backend used to generate `add <reg>, x0, <reg>` in a few
instances. It seems most places no longer generate this sequence.
This is semantically equivalent to `addi <reg>, <reg>, 0`, but the
latter has the advantage of being noted to be the canonical instruction
to be used for moves (which microarchitectures can and should recognise
as such).
The changed testcases use instruction aliases - `mv <reg>, <reg>` is an
alias for `addi <reg>, <reg>, 0`.
Reviewers: luismarques
Reviewed By: luismarques
Subscribers: hiraditya, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70124
Summary: Removes CFI CFA directives that could incorrectly propagate
beyond the basic block they were inteded for. Specifically it removes
the epilogue CFI directives. See the branch_and_tail_call test for an
example of the issue. Should fix the stack unwinding issues caused by
the incorrect directives.
Reviewers: asb, lenary, shiva0217
Reviewed By: lenary
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69723
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
Summary: Removes CFI CFA directives that could incorrectly propagate
beyond the basic block they were inteded for. Specifically it removes
the epilogue CFI directives. See the branch_and_tail_call test for an
example of the issue. Should fix the stack unwinding issues caused by
the incorrect directives.
Reviewers: asb, lenary, shiva0217
Reviewed By: lenary
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69723
Summary: When using the split sp adjustment and using the frame-pointer
we were still emitting CFI CFA directives based on the sp value. The
final sp-based offset also didn't reflect the two-stage sp adjust. There
remain CFI issues that aren't related to the split sp adjustment, and
thus will be addressed in a separate patch.
Reviewers: asb, lenary, shiva0217
Reviewed By: lenary, shiva0217
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69385
Summary: Adds tests necessary to properly show the impact of other
patches that affect the emission of CFI directives.
Reviewers: asb, lenary
Reviewed By: lenary
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69721
The following testcase
function:
.Lpcrel_label1:
auipc a0, %pcrel_hi(other_function)
addi a1, a0, %pcrel_lo(.Lpcrel_label1)
.p2align 2 # Causes a new fragment to be emitted
.type other_function,@function
other_function:
ret
exposes an odd behaviour in which only the %pcrel_hi relocation is
evaluated but not the %pcrel_lo.
$ llvm-mc -triple riscv64 -filetype obj t.s | llvm-objdump -d -r -
<stdin>: file format ELF64-riscv
Disassembly of section .text:
0000000000000000 function:
0: 17 05 00 00 auipc a0, 0
4: 93 05 05 00 mv a1, a0
0000000000000004: R_RISCV_PCREL_LO12_I other_function+4
0000000000000008 other_function:
8: 67 80 00 00 ret
The reason seems to be that in RISCVAsmBackend::shouldForceRelocation we
only consider the fragment but in RISCVMCExpr::evaluatePCRelLo we
consider the section. This usually works but there are cases where the
section may still be the same but the fragment may be another one. In
that case we end forcing a %pcrel_lo relocation without any %pcrel_hi.
This patch makes RISCVAsmBackend::shouldForceRelocation use the section,
if any, to determine if the relocation must be forced or not.
Differential Revision: https://reviews.llvm.org/D60657
Summary: Introduces the `InstrInfo::areMemAccessesTriviallyDisjoint`
hook. The test could check for instruction reorderings, but to avoid
being brittle it just checks instruction dependencies.
Reviewers: asb, lenary
Reviewed By: lenary
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67046
Summary: The hook should work for any RISC-V register. Non-allocatable registers
do not need to be reserved, for the remaining the hook will only succeed
if you pass clang the -ffixed-xX flag. This builds upon D67185, which
currently only allows reserving GPRs.
Reviewers: asb, lenary
Reviewed By: lenary
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69130
Summary:
Until this commit, these have lowered to a call to abort().
`llvm.trap()` now lowers to `unimp`, which should trap on all systems.
`llvm.debugtrap()` now lowers to `ebreak`, which is exactly what this
instruction is for.
Reviewers: asb, luismarques
Reviewed By: asb
Subscribers: hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69390
Complete fp16 support by ensuring that load extension / truncate store
operations are properly expanded.
Reviewers: asb, lenary
Reviewed By: lenary
Differential Revision: https://reviews.llvm.org/D69246
MipsMCAsmInfo was using '$' prefix for Mips32 and '.L' for Mips64
regardless of -target-abi option. By passing MCTargetOptions to MCAsmInfo
we can find out Mips ABI and pick appropriate prefix.
Tags: #llvm, #clang, #lldb
Differential Revision: https://reviews.llvm.org/D66795
This adds support for reserving GPRs such that the compiler will not
choose a register for register allocation. The implementation follows
the same design as for AArch64; each reserved register becomes a target
feature and used for getting the reserved registers for a given
MachineFunction. The backend checks that it does not need to write to
any reserved register; if it does a relevant error is generated.
Differential Revision: https://reviews.llvm.org/D67185
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68993
llvm-svn: 375084
Summary:
This patch implements the `TargetInstrInfo::verifyInstruction` hook for RISC-V. Currently the hook verifies the machine instruction's immediate operands, to check if the immediates are within the expected bounds. Without the hook invalid immediates are not detected except when doing assembly parsing, so they are silently emitted (including being truncated when emitting object code).
The bounds information is specified in tablegen by using the `OperandType` definition, which sets the `MCOperandInfo`'s `OperandType` field. Several RISC-V-specific immediate operand types were created, which extend the `MCInstrDesc`'s `OperandType` `enum`.
To have the hook called with `llc` pass it the `-verify-machineinstrs` option. For Clang add the cmake build config `-DLLVM_ENABLE_EXPENSIVE_CHECKS=True`, or temporarily patch `TargetPassConfig::addVerifyPass`.
Review concerns:
- The patch adds immediate operand type checks that cover at least the base ISA. There are several other operand types for the C extension and one type for the F/D extensions that were left out of this initial patch because they introduced further design concerns that I felt were best evaluated separately.
- Invalid register classes (e.g. passing a GPR register where a GPRC is expected) are already caught, so were not included.
- This design makes the more abstract `MachineInstr` verification depend on MC layer definitions, which arguably is not the cleanest design, but is in line with how things are done in other parts of the target and LLVM in general.
- There is some duplication of logic already present in the `MCOperandPredicate`s. Since the `MachineInstr` and `MCInstr` notions of immediates are fundamentally different, this is currently necessary.
Reviewers: asb, lenary
Reviewed By: lenary
Subscribers: hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67397
llvm-svn: 375006
LLVM may annotate the function with fastcc if there has only one caller
and there're no other caller out of the module and the function is not
naked or contain variable arguments.
The fastcc functions could pass the arguments by the caller saved registers.
Differential Revision: https://reviews.llvm.org/D68559
llvm-svn: 374857
We would like to split the SP adjustment to reduce the instructions in
prologue and epilogue as the following case. In this way, the offset of
the callee saved register could fit in a single store.
add sp,sp,-2032
sw ra,2028(sp)
sw s0,2024(sp)
sw s1,2020(sp)
sw s3,2012(sp)
sw s4,2008(sp)
add sp,sp,-64
Differential Revision: https://reviews.llvm.org/D68011
llvm-svn: 373688
These old aliases were renamed, but are still used by some projects (eg newlib).
Differential Revision: https://reviews.llvm.org/D68392
llvm-svn: 373618
The new names for FPRs ensure that the Register values within the same class are
enumerated consecutively (the order is determined by the `LessRecordRegister`
function object). Where there were tables mapping between 32- and 64-bit FPRs
(and vice versa) this patch replaces them with Register arithmetic. The
enumeration order between different register classes is expected to continue to
be arbitrary, although it does impact the conversion from the (overloaded) asm
FPR names to Register values, and therefore might require updates to the target
if the sorting algorithm is changed. Static asserts were added to ensure that
changes to the ordering that would impact the current implementation are
detected.
Differential Revision: https://reviews.llvm.org/D67423
llvm-svn: 373096
This reverts r372314, reapplying r372285 and the commits which depend
on it (r372286-r372293, and r372296-r372297)
This was missing one switch to getTargetConstant in an untested case.
llvm-svn: 372338
This broke the Chromium build, causing it to fail with e.g.
fatal error: error in backend: Cannot select: t362: v4i32 = X86ISD::VSHLI t392, Constant:i8<15>
See llvm-commits thread of r372285 for details.
This also reverts r372286, r372287, r372288, r372289, r372290, r372291,
r372292, r372293, r372296, and r372297, which seemed to depend on the
main commit.
> Encode them directly as an imm argument to G_INTRINSIC*.
>
> Since now intrinsics can now define what parameters are required to be
> immediates, avoid using registers for them. Intrinsics could
> potentially want a constant that isn't a legal register type. Also,
> since G_CONSTANT is subject to CSE and legalization, transforms could
> potentially obscure the value (and create extra work for the
> selector). The register bank of a G_CONSTANT is also meaningful, so
> this could throw off future folding and legalization logic for AMDGPU.
>
> This will be much more convenient to work with than needing to call
> getConstantVRegVal and checking if it may have failed for every
> constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
> immarg operands, many of which need inspection during lowering. Having
> to find the value in a register is going to add a lot of boilerplate
> and waste compile time.
>
> SelectionDAG has always provided TargetConstant for constants which
> should not be legalized or materialized in a register. The distinction
> between Constant and TargetConstant was somewhat fuzzy, and there was
> no automatic way to force usage of TargetConstant for certain
> intrinsic parameters. They were both ultimately ConstantSDNode, and it
> was inconsistently used. It was quite easy to mis-select an
> instruction requiring an immediate. For SelectionDAG, start emitting
> TargetConstant for these arguments, and using timm to match them.
>
> Most of the work here is to cleanup target handling of constants. Some
> targets process intrinsics through intermediate custom nodes, which
> need to preserve TargetConstant usage to match the intrinsic
> expectation. Pattern inputs now need to distinguish whether a constant
> is merely compatible with an operand or whether it is mandatory.
>
> The GlobalISelEmitter needs to treat timm as a special case of a leaf
> node, simlar to MachineBasicBlock operands. This should also enable
> handling of patterns for some G_* instructions with immediates, like
> G_FENCE or G_EXTRACT.
>
> This does include a workaround for a crash in GlobalISelEmitter when
> ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372314
Encode them directly as an imm argument to G_INTRINSIC*.
Since now intrinsics can now define what parameters are required to be
immediates, avoid using registers for them. Intrinsics could
potentially want a constant that isn't a legal register type. Also,
since G_CONSTANT is subject to CSE and legalization, transforms could
potentially obscure the value (and create extra work for the
selector). The register bank of a G_CONSTANT is also meaningful, so
this could throw off future folding and legalization logic for AMDGPU.
This will be much more convenient to work with than needing to call
getConstantVRegVal and checking if it may have failed for every
constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
immarg operands, many of which need inspection during lowering. Having
to find the value in a register is going to add a lot of boilerplate
and waste compile time.
SelectionDAG has always provided TargetConstant for constants which
should not be legalized or materialized in a register. The distinction
between Constant and TargetConstant was somewhat fuzzy, and there was
no automatic way to force usage of TargetConstant for certain
intrinsic parameters. They were both ultimately ConstantSDNode, and it
was inconsistently used. It was quite easy to mis-select an
instruction requiring an immediate. For SelectionDAG, start emitting
TargetConstant for these arguments, and using timm to match them.
Most of the work here is to cleanup target handling of constants. Some
targets process intrinsics through intermediate custom nodes, which
need to preserve TargetConstant usage to match the intrinsic
expectation. Pattern inputs now need to distinguish whether a constant
is merely compatible with an operand or whether it is mandatory.
The GlobalISelEmitter needs to treat timm as a special case of a leaf
node, simlar to MachineBasicBlock operands. This should also enable
handling of patterns for some G_* instructions with immediates, like
G_FENCE or G_EXTRACT.
This does include a workaround for a crash in GlobalISelEmitter when
ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372285
Most of the test changes are trivial instruction reorderings and differing
register allocations, without any obvious performance impact.
Differential Revision: https://reviews.llvm.org/D66973
llvm-svn: 372106
Summary:
Now that llvm-objdump allows target-specific options, we match the
`no-aliases` and `numeric` options for RISC-V, as supported by GNU objdump.
This is done by overriding the variables used for the command-line options, so
that the command-line options are still supported.
This patch updates all tests using `llvm-objdump -riscv-no-aliases` to use
`llvm-objdump -M no-aliases`.
Reviewers: luismarques, asb
Reviewed By: luismarques, asb
Subscribers: pzheng, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66139
llvm-svn: 371534
Summary:
This is an option primarily to use during testing. Instead of always
printing registers using their ABI names, this allows a user to request they
are printed with their architectural name.
This is then used in the register constraint tests to ensure the mapping
between architectural and abi names is correct.
Reviewers: asb, luismarques
Reviewed By: asb
Subscribers: pzheng, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65950
llvm-svn: 371531
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: nemanjai, javed.absar, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, s.egerton, pzheng, ychen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67267
llvm-svn: 371212
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jyknight, sdardis, nemanjai, javed.absar, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67229
llvm-svn: 371200
Summary:
This patch renames functions that takes or returns alignment as log2, this patch will help with the transition to llvm::Align.
The renaming makes it explicit that we deal with log(alignment) instead of a power of two alignment.
A few renames uncovered dubious assignments:
- `MirParser`/`MirPrinter` was expecting powers of two but `MachineFunction` and `MachineBasicBlock` were using deal with log2(align). This patch fixes it and updates the documentation.
- `MachineBlockPlacement` exposes two flags (`align-all-blocks` and `align-all-nofallthru-blocks`) supposedly interpreted as power of two alignments, internally these values are interpreted as log2(align). This patch updates the documentation,
- `MachineFunctionexposes` exposes `align-all-functions` also interpreted as power of two alignment, internally this value is interpreted as log2(align). This patch updates the documentation,
Reviewers: lattner, thegameg, courbet
Subscribers: dschuff, arsenm, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, Jim, s.egerton, llvm-commits, courbet
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65945
llvm-svn: 371045
The patch fixed the issue that RV64 didn't clear the upper bits
when return complex floating value with lp64 ABI.
float _Complex
complex_add(float _Complex a, float _Complex b)
{
return a + b;
}
RealResult = zero_extend(RealA + RealB)
ImageResult = ImageA + ImageB
Return (RealResult | (ImageResult << 32))
The patch introduces shouldExtendTypeInLibCall target hook to suppress
the AssertZext generation when lowering floating LibCall.
Thanks to Eli's comments from the Bugzilla
https://bugs.llvm.org/show_bug.cgi?id=42820
Differential Revision: https://reviews.llvm.org/D65497
llvm-svn: 370275
Prefer `MCFixupKind` where possible and add getTargetKind() to
convert to `unsigned` when needed rather than scattering cast
operators around the place.
Differential Revision: https://reviews.llvm.org/D59890
llvm-svn: 369720
The hint instructions are enabled by default (if the standard C extension is
enabled). To disable them pass -mattr=-rvc-hints.
Differential Revision: https://reviews.llvm.org/D62592
llvm-svn: 369528
Follow binutils in using RISCV_32_PCREL for the FDE initial location. As
explained in the relevant binutils commit
<a6cbf936e3>,
the ADD/SUB pair of relocations is problematic in the presence of linker
relaxation.
This patch has the same end goal as D64715 but includes test changes and
avoids adding a new global VariantKind to MCExpr.h (preferring
RISCVMCExpr VKs like the rest of the RISC-V backend).
Differential Revision: https://reviews.llvm.org/D66419
llvm-svn: 369375
The current behavior of shouldForceRelocation forces relocations for the
majority of fixups when relaxation is enabled. This makes sense for
fixups which incorporate symbols but is unnecessary for simple data
fixups where the fixup target is already resolved to an absolute value.
Differential Revision: https://reviews.llvm.org/D63404
Patch by Edward Jones.
llvm-svn: 369257
Only in public interfaces that have not yet been converted should there remain
registers with unsigned type.
Differential Revision: https://reviews.llvm.org/D66252
llvm-svn: 369114
This patch allows symbols followed by an expression for an offset to be
parsed as bare symbols.
Differential Revision: https://reviews.llvm.org/D57332
llvm-svn: 369097
This allows arguments with the constraint A to be lowered to input nodes
for RISC-V, which implies a memory address stored in a register.
This patch adds the minimal amount of code required to get operands with
the right constraints to compile.
https://reviews.llvm.org/D54296
llvm-svn: 369095
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Craig Topper