The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D103084
Add a NativeDelegate API to pass new processes (forks) to LLGS,
and support detaching them via the 'D' packet. A 'D' packet without
a specific PID detaches all processes, otherwise it detaches either
the specified subprocess or the main process, depending on the passed
PID.
Differential Revision: https://reviews.llvm.org/D100191
This implements the interactive trace start and stop methods.
This diff ended up being much larger than I anticipated because, by doing it, I found that I had implemented in the beginning many things in a non optimal way. In any case, the code is much better now.
There's a lot of boilerplate code due to the gdb-remote protocol, but the main changes are:
- New tracing packets: jLLDBTraceStop, jLLDBTraceStart, jLLDBTraceGetBinaryData. The gdb-remote packet definitions are quite comprehensive.
- Implementation of the "process trace start|stop" and "thread trace start|stop" commands.
- Implementaiton of an API in Trace.h to interact with live traces.
- Created an IntelPTDecoder for live threads, that use the debugger's stop id as checkpoint for its internal cache.
- Added a functionality to stop the process in case "process tracing" is enabled and a new thread can't traced.
- Added tests
I have some ideas to unify the code paths for post mortem and live threads, but I'll do that in another diff.
Differential Revision: https://reviews.llvm.org/D91679
Add a minimal support for the multiprocess extension in lldb-server.
The server indicates support for it via qSupported, and accepts
thread-ids containing a PID. However, it still does not support
debugging more than one inferior, so any other PID value results
in an error.
Differential Revision: https://reviews.llvm.org/D98482
Depends on D89283.
The goal of this packet (jTraceGetSupportedType) is to be able to query the gdb-server for the tracing technology that can work for the current debuggeer, which can make the user experience simpler but allowing the user to simply type
thread trace start
to start tracing the current thread without even telling the debugger to use "intel-pt", for example. Similarly, `thread trace start [args...]` would accept args beloging to the working trace type.
Also, if the user typed
help thread trace start
We could directly show the help information of the trace type that is supported for the target, or mention instead that no tracing is supported, if that's the case.
I added some simple tests, besides, when I ran this on my machine with intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: {"description":"Intel Processor Trace","pluginName":"intel-pt"}
On a machine without intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: E00;
Reviewed By: clayborg, labath
Differential Revision: https://reviews.llvm.org/D90490
1. Extended the gdb-remote communication related classes with disk file/directory
completion functions;
2. Added two common completion functions RemoteDiskFiles and
RemoteDiskDirectories based on the functions above;
3. Added completion for these commands:
A. platform get-file <remote-file> <local-file>;
B. platform put-file <local-file> <remote-file>;
C. platform get-size <remote-file>;
D. platform settings -w <remote-dir>;
E. platform open file <remote-file>.
4. Added related tests for client and server;
5. Updated docs/lldb-platform-packets.txt.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D85284
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
Summary:
This is the first of a few patches I have to improve the performance of dynamic module loading on Android.
In this first diff I'll describe the context of my main motivation and will then link to it in the other diffs to avoid repeating myself.
## Motivation
I have a few scenarios where opening a specific feature on an Android app takes around 40s when lldb is attached to it. The reason for that is because 40 modules are dynamicly loaded at that point in time and each one of them is taking ~1s.
## The problem
To learn about new modules we have a breakpoint on a linker function that is called twice whenever a module is loaded. One time just before it's loaded (so lldb can check which modules are loaded) and another right after it's loaded (so lldb can check again which ones are loaded and calculate the diference).
It's figuring out which modules are loaded that is taking quite some time. This is currently done by traversing the linked list of loaded shared libraries that the linker maintains in memory. Each item in the linked list requires its own `x` packet sent to the gdb server (this is android so the network also plays a part). In my scenario there are 400+ loaded libraries and even though we read 0x800 worth of bytes at a time we still make ~180 requests that end up taking 150-200ms.
We also do this twice, once before the module is loaded (state = eAdd) and another right after (state = eConsistent) which easly adds up to ~400ms per module.
## A solution
**Implement `xfer:libraries-svr4` in lldb-server:**
I noticed in the code that loads the new modules that it had support for the `xfer:libraries-svr4` packet (added ~4 years ago to support the ds2 debug server) but we didn't support it in lldb-server. This single packet returns an xml list of all the loaded modules by the process. The advantage is that there's no more need to make 180 requests to read the linked list. Additionally this new requests takes around 10ms.
**More efficient usage of the `xfer:libraries-svr4` packet in lldb:**
When `xfer:libraries-svr4` is available the Process class has a `LoadModules` function that requests this packet and then loads or unloads modules based on the current list of loaded modules by the process.
This is the function that is used by the DYLDRendezvous class to get the list of loaded modules before and after the module is loaded. However, this is really not needed since the LoadModules function already loaded or unloaded the modules accordingly. I changed this strategy to call LoadModules only once (after the process has loaded the module).
**Bugs**
I found a few issues in lldb while implementing this and have submitted independent patches for them.
I tried to devide this into multiple logical patches to make it easier to review and discuss.
## Tests
I wanted to put these set of diffs up before having all the tests up and running to start having them reviewed from a techical point of view. I'm also having some trouble making the tests running on linux so I need more time to make that happen.
# This diff
The `xfer` packages follow the same protocol, they are requested with `xfer:<object>:<read|write>:<annex>:<offset,length>` and a return that starts with `l` or `m` depending if the offset and length covers the entire data or not. Before implementing the `xfer:libraries-svr4` I refactored the `xfer:auxv` to generically handle xfer packets so we can easly add new ones.
The overall structure of the function ends up being:
* Parse the packet into its components: object, offset etc.
* Depending on the object do its own logic to generate the data.
* Return the data based on its size, the requested offset and length.
Reviewers: clayborg, xiaobai, labath
Reviewed By: labath
Subscribers: mgorny, krytarowski, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62499
llvm-svn: 362982
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch removes the comments following the header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
Differential revision: https://reviews.llvm.org/D54385
llvm-svn: 346625
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
While trying to use this header I noticed that it is not in the include
folder. Move it to there and update all #includes to reference that file
correctly.
llvm-svn: 327996
Summary:
This patch adds support for sending strings along with
error codes in the reply packets. The implementation is
based on the feedback recieved in the lldb-dev mailing
list. The patch also adds an extra packet for the client
to query if the server has the capability to provide
strings along with error replys.
Reviewers: labath, jingham, sas, lldb-commits, clayborg
Reviewed By: labath, clayborg
Differential Revision: https://reviews.llvm.org/D34945
llvm-svn: 307768
Summary:
The changes consist of new packets for trace manipulation and
trace collection. The new packets are also documented. The packets
are capable of providing custom trace specific parameters to start
tracing and also retrieve such configuration from the server.
Reviewers: clayborg, lldb-commits, tberghammer, labath, zturner
Reviewed By: clayborg, labath
Subscribers: krytarowski, lldb-commits
Differential Revision: https://reviews.llvm.org/D32585
llvm-svn: 303972
This patch makes adjustments to header file includes in
lldbUtility based on recommendations by the iwyu tool
(include-what-you-use). The goal here is to make sure that
all files include the exact set of headers which are needed
for that file only, to eliminate cases of dead includes (e.g.
someone deleted some code but forgot to delete the header
includes that that code necessitated), and to eliminate the
case where header includes are picked up transitively.
llvm-svn: 299676
Summary: QPassSignals package allows lldb client to tell lldb-server to ignore certain types of signals and re-inject them back to inferior without stopping execution.
Reviewers: jmajors, labath
Subscribers: danalbert, srhines, emaste, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30286
Author: Eugene Zemtsov <ezemtsov@google.com>
llvm-svn: 296101
Summary:
This adds the jModulesInfo packet, which is the equivalent of qModulesInfo, but it enables us to
query multiple modules at once. This makes a significant speed improvement in case the
application has many (over a hundred) modules, and the communication link has a non-negligible
latency. This functionality is accessed by ProcessGdbRemote::PrefetchModuleSpecs(), which does
the caching. GetModuleSpecs() is modified to first consult the cache before asking the remote
stub. PrefetchModuleSpecs is currently only called from POSIX-DYLD dynamic loader plugin, after
it reads the list of modules from the inferior memory, but other uses are possible.
This decreases the attach time to an android application by about 40%.
Reviewers: clayborg
Subscribers: tberghammer, lldb-commits, danalbert
Differential Revision: https://reviews.llvm.org/D24236
llvm-svn: 280919
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
rnb_err_t
RNBRemote::HandlePacket_stop_process (const char *p)
{
if (!DNBProcessInterrupt(m_ctx.ProcessID()))
HandlePacket_last_signal (NULL);
return rnb_success;
}
In the call to DNBProcessInterrupt we did:
nub_bool_t
DNBProcessInterrupt(nub_process_t pid)
{
MachProcessSP procSP;
if (GetProcessSP (pid, procSP))
return procSP->Interrupt();
return false;
}
This would always return false. It would cause HandlePacket_stop_process to always call "HandlePacket_last_signal (NULL);" which would send an extra stop reply packet _if_ the process is stopped. On a machine with enough cores, it would call DNBProcessInterrupt(...) and then HandlePacket_last_signal(NULL) so quickly that it will never send out an extra stop reply packet. But if the machine is slow enough or doesn't have enough cores, it could cause the call to HandlePacket_last_signal() to actually succeed and send an extra stop reply packet. This would cause problems up in GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse() where it would get the first stop reply packet and then possibly return or execute an async packet. If it returned, then the next packet that was sent will get the second stop reply as its response. If it executes an async packet, the async packet will get the wrong response.
To fix this I did the following:
1 - in debugserver, I fixed "bool MachProcess::Interrupt()" to return true if it sends the signal so we avoid sending the stop reply twice on slower machines
2 - Added a log line to RNBRemote::HandlePacket_stop_process() to say if we ever send an extra stop reply so we will see this in the darwin console output if this does happen
3 - Added response validators to StringExtractorGDBRemote so that we can verify some responses to some packets.
4 - Added validators to packets that often follow stop reply packets like the "m" packet for memory reads, JSON packets since "jThreadsInfo" is often sent immediately following a stop reply.
5 - Modified GDBRemoteCommunicationClient::SendPacketAndWaitForResponseNoLock() to validate responses. Any "StringExtractorGDBRemote &response" that contains a valid response verifier will verify the response and keep looking for correct responses up to 3 times. This will help us get back on track if we do get extra stop replies. If a StringExtractorGDBRemote does not have a response validator, it will accept any packet in response.
6 - In GDBRemoteCommunicationClient::SendPacketAndWaitForResponse we copy the response validator from the "response" argument over into m_async_response so that if we send the packet by interrupting the running process, we can validate the response we actually get in GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse()
7 - Modified GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse() to always check for an extra stop reply packet for 100ms when the process is interrupted. We were already doing this because we might interrupt a process with a \x03 packet, yet the process was in the process of stopping due to another reason. This race condition could cause an extra stop reply packet because the GDB remote protocol says if a \x03 packet is sent while the process is stopped, we should send a stop reply packet back. Now we always check for an extra stop reply packet when we manually interrupt a process.
The issue was showing up when our IDE would attempt to set a breakpoint while the process is running and this would happen:
--> \x03
<-- $T<stop reply 1>
--> z0,AAAAA,BB (set breakpoint)
<-- $T<stop reply 1> (incorrect extra stop reply packet)
--> c
<-- OK (response from z0 packet)
Now all packet traffic was off by one response. Since we now have a validator on the response for "z" packets, we do this:
--> \x03
<-- $T<stop reply 1>
--> z0,AAAAA,BB (set breakpoint)
<-- $T<stop reply 1> (Ignore this because this can't be the response to z0 packets)
<-- OK -- (we are back on track as this is a valid response to z0)
...
As time goes on we should add more packet validators.
<rdar://problem/22859505>
llvm-svn: 265086
The standard remote debugging workflow with gdb is to start the
application on the remote host under gdbserver (e.g.: gdbserver :5039
a.out) and then connect to it with gdb.
The same workflow is supported by debugserver/lldb-gdbserver with a very
similar syntax but to access all features of lldb we need to be
connected also to an lldb-platform instance running on the target.
Before this change this had to be done manually with starting a separate
lldb-platform on the target machine and then connecting to it with lldb
before connecting to the process.
This change modifies the behavior of "platform connect" with
automatically connecting to the process instance if it was started by
the remote platform. With this command replacing gdbserver in a gdb
based worflow is usually as simple as replacing the command to execute
gdbserver with executing lldb-platform.
Differential revision: http://reviews.llvm.org/D14952
llvm-svn: 255016
Summary:
This commit adds support for binary memory reads ($x) to lldb-server. It also removes the "0x"
prefix from the $x client packet, to make it more compatible with the old $m packet. This allows
us to use almost the same code for handling both packet types. I have verified that debugserver
correctly handles $x packets even without the leading "0x". I have added a test which verifies
that the stub returns the same memory contents for both kinds of memory reads ($x and $m).
Reviewers: tberghammer, jasonmolenda
Subscribers: iancottrell, lldb-commits
Differential Revision: http://reviews.llvm.org/D13695
llvm-svn: 250295
Summary:
This commit adds initial support for the jThreadsInfo packet to lldb-server. The current
implementation does not expedite inferior memory. I have also added a description of the new
packet to our protocol documentation (mostly taken from Greg's earlier commit message).
Reviewers: clayborg, ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11187
llvm-svn: 242402
Summary:
- Consolidate Unix signals selection in UnixSignals.
- Make Unix signals available from platform.
- Add jSignalsInfo packet to retrieve Unix signals from remote platform.
- Get a copy of the platform signal for each remote process.
- Update SB API for signals.
- Update signal utility in test suite.
Reviewers: ovyalov, clayborg
Subscribers: chaoren, jingham, labath, emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11094
llvm-svn: 242101
Summary:
This patch is the beginnings of support for Non-stop mode in the remote protocol. Letting a user examine stopped threads, while other threads execute freely.
Non-stop mode is enabled using the setting target.non-stop-mode, which sends a QNonStop packet when establishing the remote connection.
Changes are also made to treat the '?' stop reply packet differently in non-stop mode, according to spec https://sourceware.org/gdb/current/onlinedocs/gdb/Remote-Non_002dStop.html#Remote-Non_002dStop.
A setting for querying the remote for default thread on setup is also included.
Handling of '%' async notification packets will be added next.
Reviewers: clayborg
Subscribers: lldb-commits, ADodds, ted, deepak2427
Differential Revision: http://reviews.llvm.org/D9656
llvm-svn: 237239
Processes running on a remote target can already send $O messages
to send stdout but there is no way to send stdin to a remote
inferior.
This allows processes using the API to pump stdin into a remote
inferior process.
It fixes a hang in TestProcessIO.py when running against a remote
target.
llvm-svn: 228419
The issue was GDBRemoteCommunication::CheckForPacket() already fixes up any prefixed bytes (0x7d followed by value that is XOR'ed with 0x20). If we do this again, we cause binary packets to lose bytes.
This allows lldb-platform to be able to upload binaries and debug them remotely.
llvm-svn: 218002
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
Example code:
remote_platform = lldb.SBPlatform("remote-macosx");
remote_platform.SetWorkingDirectory("/private/tmp")
debugger.SetSelectedPlatform(remote_platform)
connect_options = lldb.SBPlatformConnectOptions("connect://localhost:1111");
err = remote_platform.ConnectRemote(connect_options)
if err.Success():
print >> result, 'Connected to remote platform:'
print >> result, 'hostname: %s' % (remote_platform.GetHostname())
src = lldb.SBFileSpec("/Applications/Xcode.app/Contents/SharedFrameworks/LLDB.framework", False)
dst = lldb.SBFileSpec()
# copy src to platform working directory since "dst" is empty
err = remote_platform.Install(src, dst);
if err.Success():
print >> result, '%s installed successfully' % (src)
else:
print >> result, 'error: failed to install "%s": %s' % (src, err)
Implemented many calls needed in lldb-platform to be able to install a directory that contains symlinks, file and directories.
The remote lldb-platform can now launch GDB servers on the remote system so that remote debugging can be spawned through the remote platform when connected to a remote platform.
The API in SBPlatform is subject to change and will be getting many new functions.
llvm-svn: 195273
Summary:
This merge brings in the improved 'platform' command that knows how to
interface with remote machines; that is, query OS/kernel information, push
and pull files, run shell commands, etc... and implementation for the new
communication packets that back that interface, at least on Darwin based
operating systems via the POSIXPlatform class. Linux support is coming soon.
Verified the test suite runs cleanly on Linux (x86_64), build OK on Mac OS
X Mountain Lion.
Additional improvements (not in the source SVN branch 'lldb-platform-work'):
- cmake build scripts for lldb-platform
- cleanup test suite
- documentation stub for qPlatform_RunCommand
- use log class instead of printf() directly
- reverted work-in-progress-looking changes from test/types/TestAbstract.py that work towards running the test suite remotely.
- add new logging category 'platform'
Reviewers: Matt Kopec, Greg Clayton
Review: http://llvm-reviews.chandlerc.com/D1493
llvm-svn: 189295
the CommandInterpreter where it was always being used.
Make sure that Modules can track their object file offsets correctly to
allow opening of sub object files (like the "__commpage" on darwin).
Modified the Platforms to be able to launch processes. The first part of this
move is the platform soon will become the entity that launches your program
and when it does, it uses a new ProcessLaunchInfo class which encapsulates
all process launching settings. This simplifies the internal APIs needed for
launching. I want to slowly phase out process launching from the process
classes, so for now we can still launch just as we used to, but eventually
the platform is the object that should do the launching.
Modified the Host::LaunchProcess in the MacOSX Host.mm to correctly be able
to launch processes with all of the new eLaunchFlag settings. Modified any
code that was manually launching processes to use the Host::LaunchProcess
functions.
Fixed an issue where lldb_private::Args had implicitly defined copy
constructors that could do the wrong thing. This has now been fixed by adding
an appropriate copy constructor and assignment operator.
Make sure we don't add empty ModuleSP entries to a module list.
Fixed the commpage module creation on MacOSX, but we still need to train
the MacOSX dynamic loader to not get rid of it when it doesn't have an entry
in the all image infos.
Abstracted many more calls from in ProcessGDBRemote down into the
GDBRemoteCommunicationClient subclass to make the classes cleaner and more
efficient.
Fixed the default iOS ARM register context to be correct and also added support
for targets that don't support the qThreadStopInfo packet by selecting the
current thread (only if needed) and then sending a stop reply packet.
Debugserver can now start up with a --unix-socket (-u for short) and can
then bind to port zero and send the port it bound to to a listening process
on the other end. This allows the GDB remote platform to spawn new GDB server
instances (debugserver) to allow platform debugging.
llvm-svn: 129351
GDBRemoteCommunicationServer classes. This involved adding a new packet
named "qSpeedTest" which can test the speed of a packet send/response pairs
using a wide variety of send/recv packet sizes.
Added a few new connection classes: one for shared memory, and one for using
mach messages (Apple only). The mach message stuff is experimental and not
working yet, but added so I don't lose the code. The shared memory stuff
uses pretty standard calls to setup shared memory.
llvm-svn: 128837
class now implements the Host functionality for a lot of things that make
sense by default so that subclasses can check:
int
PlatformSubclass::Foo ()
{
if (IsHost())
return Platform::Foo (); // Let the platform base class do the host specific stuff
// Platform subclass specific code...
int result = ...
return result;
}
Added new functions to the platform:
virtual const char *Platform::GetUserName (uint32_t uid);
virtual const char *Platform::GetGroupName (uint32_t gid);
The user and group names are cached locally so that remote platforms can avoid
sending packets multiple times to resolve this information.
Added the parent process ID to the ProcessInfo class.
Added a new ProcessInfoMatch class which helps us to match processes up
and changed the Host layer over to using this new class. The new class allows
us to search for processs:
1 - by name (equal to, starts with, ends with, contains, and regex)
2 - by pid
3 - And further check for parent pid == value, uid == value, gid == value,
euid == value, egid == value, arch == value, parent == value.
This is all hookup up to the "platform process list" command which required
adding dumping routines to dump process information. If the Host class
implements the process lookup routines, you can now lists processes on
your local machine:
machine1.foo.com % lldb
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari
94727 244 username usergroup username usergroup x86_64-apple-darwin Xcode
92742 92710 username usergroup username usergroup i386-apple-darwin debugserver
This of course also works remotely with the lldb-platform:
machine1.foo.com % lldb-platform --listen 1234
machine2.foo.com % lldb
(lldb) platform create remote-macosx
Platform: remote-macosx
Connected: no
(lldb) platform connect connect://localhost:1444
Platform: remote-macosx
Triple: x86_64-apple-darwin
OS Version: 10.6.7 (10J869)
Kernel: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
Hostname: machine1.foo.com
Connected: yes
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99556 244 username usergroup username usergroup x86_64-apple-darwin trustevaluation
99548 65539 username usergroup username usergroup x86_64-apple-darwin lldb
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari
The lldb-platform implements everything with the Host:: layer, so this should
"just work" for linux. I will probably be adding more stuff to the Host layer
for launching processes and attaching to processes so that this support should
eventually just work as well.
Modified the target to be able to be created with an architecture that differs
from the main executable. This is needed for iOS debugging since we can have
an "armv6" binary which can run on an "armv7" machine, so we want to be able
to do:
% lldb
(lldb) platform create remote-ios
(lldb) file --arch armv7 a.out
Where "a.out" is an armv6 executable. The platform then can correctly decide
to open all "armv7" images for all dependent shared libraries.
Modified the disassembly to show the current PC value. Example output:
(lldb) disassemble --frame
a.out`main:
0x1eb7: pushl %ebp
0x1eb8: movl %esp, %ebp
0x1eba: pushl %ebx
0x1ebb: subl $20, %esp
0x1ebe: calll 0x1ec3 ; main + 12 at test.c:18
0x1ec3: popl %ebx
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf
0x1edb: leal 213(%ebx), %eax
0x1ee1: movl %eax, (%esp)
0x1ee4: calll 0x1f1e ; puts
0x1ee9: calll 0x1f0c ; getchar
0x1eee: movl $20, (%esp)
0x1ef5: calll 0x1e6a ; sleep_loop at test.c:6
0x1efa: movl $12, %eax
0x1eff: addl $20, %esp
0x1f02: popl %ebx
0x1f03: leave
0x1f04: ret
This can be handy when dealing with the new --line options that was recently
added:
(lldb) disassemble --line
a.out`main + 13 at test.c:19
18 {
-> 19 printf("Process: %i\n\n", getpid());
20 puts("Press any key to continue..."); getchar();
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf
Modified the ModuleList to have a lookup based solely on a UUID. Since the
UUID is typically the MD5 checksum of a binary image, there is no need
to give the path and architecture when searching for a pre-existing
image in an image list.
Now that we support remote debugging a bit better, our lldb_private::Module
needs to be able to track what the original path for file was as the platform
knows it, as well as where the file is locally. The module has the two
following functions to retrieve both paths:
const FileSpec &Module::GetFileSpec () const;
const FileSpec &Module::GetPlatformFileSpec () const;
llvm-svn: 128563
On Mac OS X we now have 3 platforms:
PlatformDarwin - must be subclassed to fill in the missing pure virtual funcs
but this implements all the common functionality between
remote-macosx and remote-ios. It also allows for another
platform to be used (remote-gdb-server for now) when doing
remote connections. Keeping this pluggable will allow for
flexibility.
PlatformMacOSX - Now implements both local and remote macosx desktop platforms.
PlatformRemoteiOS - Remote only iOS that knows how to locate SDK files in the
cached SDK locations on the host.
A new agnostic platform has been created:
PlatformRemoteGDBServer - this implements the platform using the GDB remote
protocol and uses the built in lldb_private::Host
static functions to implement many queries.
llvm-svn: 128193
platform connect <args>
platform disconnect
Each platform can decide the args they want to use for "platform connect". I
will need to add a function that gets the connect options for the current
platform as each one can have different options and argument counts.
Hooked up more functionality in the PlatformMacOSX and PlatformRemoteiOS.
Also started an platform agnostic PlatformRemoteGDBServer.cpp which can end
up being used by one or more actual platforms. It can also be specialized and
allow for platform specific commands.
llvm-svn: 128123
GDBRemoteCommunication - The base GDB remote communication class
GDBRemoteCommunicationClient - designed to be used for clients the connect to
a remote GDB server
GDBRemoteCommunicationServer - designed to be used on the server side of a
GDB server implementation.
llvm-svn: 128070
enabled LLVM make style building and made this compile LLDB on Mac OS X. We
can now iterate on this to make the build work on both linux and macosx.
llvm-svn: 108009
Raphael Isemann