The current TLSDESC optimization code assumes:
```
leaq x@tlsdesc(%rip), %rax
call *x@tlscall(%rax) # adjacent
```
From https://gitlab.freedesktop.org/mesa/mesa/-/issues/5665 , it seems that the
two instructions may not be adjacent in GCC 10's output:
```
leaq x@tlsdesc(%rip), %rax
something else
call *x@tlscall(%rax)
```
This patch supports the case. While here, support non-RAX registers for
R_X86_64_GOTPC32_TLSDESC, in case the compiler generates inefficient:
```
leaq x@tlsdesc(%rip), %rcx # or %rdx, %rbx, %rdi, ...
movq %rcx, %rax
call *x@tlscall(%rax) # GNU ld/gold error for non-RAX
```
Differential Revision: https://reviews.llvm.org/D114416
This brings back the original version of D81359.
I have found several use cases now.
* Unlike GNU ld, LLD's relocation processing is one pass. If we decide to
optimize(relax) R_X86_64_{,REX_}GOTPCRELX, we will suppress GOT generation and
cannot undo the decision later. Optimizing R_X86_64_REX_GOTPCRELX can usually
make it easy to hit `relocation R_X86_64_REX_GOTPCRELX out of range` because
the distance to GOT is usually shorter. Without --no-relax, the user has to
recompile with `-Wa,-mrelax-relocations=no`.
* The option would help during my investigationg of the root cause of https://git.kernel.org/linus/09e43968db40c33a73e9ddbfd937f46d5c334924
* There is need for relaxation for AArch64 & RISC-V. Implementing this for
x86-64 improves consistency with little target-specific cost (two-line
X86_64.cpp change).
Reviewed By: alexander-shaposhnikov
Differential Revision: https://reviews.llvm.org/D113615
This change implements support for R_ARM_THM_JUMP8 relocation in
addition to R_ARM_THM_JUMP11 which is already supported by LLD.
Differential Revision: https://reviews.llvm.org/D21225
Many diagnostics use `getErrorPlace` or `getErrorLocation` to report a location.
In the presence of line table debug information, `getErrorPlace` uses a source
file location and ignores the object file location. However, the object file
location is sometimes more useful.
This patch changes "undefined symbol" and "out of range" diagnostics to report
both object/source file locations. Other diagnostics can use similar format if
needed.
The key idea is to let `InputSectionBase::getLocation` report the object file
location and use `getSrcMsg` for source file/line information. `getSrcMsg`
doesn't leverage `STT_FILE` information yet, but I think the temporary lack of
the functionality is ok.
For the ARM "branch and link relocation" diagnostic, I arbitrarily place the
source file location at the end of the line. The diagnostic is not very common
so its formatting doesn't need to be pretty.
Differential Revision: https://reviews.llvm.org/D112518
For `InputSection` `.foo`, its `InputBaseSection::{areRelocsRela,firstRelocation,numRelocation}` basically
encode the information of `.rel[a].foo`. However, one uint32_t (the relocation section index)
suffices. See the implementation of `relsOrRelas`.
This change decreases sizeof(InputSection) from 184 to 176 on 64-bit Linux.
The maximum resident set size linking a large application (1.2G output) decreases by 0.39%.
Differential Revision: https://reviews.llvm.org/D112513
For a function call (using the default `-fplt`), GCC `-mcmodel=large` generates an assembly modifier which
leads to an R_X86_64_PLTOFF64 relocation. In real world,
http://git.ageinghacker.net/jitter (used by GNU poke) uses `-mcmodel=large`.
R_X86_64_PLTOFF64's formula is (if preemptible) `L - GOT + A` or (if non-preemptible) `S - GOT + A`
where `GOT` is (confusingly) the address of `.got.plt`
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D112386
Most architectures use .got instead of .got.plt, so switching the default can
minimize customization.
This fixes an issue for SPARC V9 which uses .got .
AVR, AMDGPU, and MSP430 don't seem to use _GLOBAL_OFFSET_TABLE_.
(As I mentioned in https://reviews.llvm.org/D62609#1534158 ,
the condition for using bti c for executable can be loosened.)
In two cases the address of a PLT may escape:
* canonical PLT entry for a STT_FUNC
* non-preemptible STT_GNU_IFUNC which is converted to STT_FUNC
The first case can be detected with `needsPltAddr`.
The second case is not straightforward to detect because for the Relocations.cpp
created `directSym`, it's difficult to know whether the associated `sym` has
exercised the `!needsPlt(expr)` code path. Just use the conservative `isInIplt`
condition. A non-preemptible ifunc not referenced by non-GOT-generating
non-PLT-generating relocations will have an unneeded `bti c`, but the cost is acceptable.
The second case fixes a bug as well: a -shared link may have non-preemptible ifunc.
Before the patch we did not emit `bti c` and could be wrong if the PLT address escaped.
GNU ld doesn't handle the case: `relocation R_AARCH64_ADR_PREL_PG_HI21 against STT_GNU_IFUNC symbol 'ifunc2' isn't handled by elf64_aarch64_final_link_relocate` (https://sourceware.org/bugzilla/show_bug.cgi?id=28370)
For -shared, if BTI is enabled but PAC is disabled, the PLT entry size increases
from 16 to 24 because we have to select the PLT scheme early, but the cost is
acceptable.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D110217
This patch is a followup patch to https://reviews.llvm.org/D105760 which adds this relocation. This handles the relocation in lld.
The s_branch family of instruction does the following:
PC = PC + signext(simm * 4) + 4
so we we do the opposite on the target address before writing it in the instruction stream.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D105761
Since D100490 this case is diagnosed for -z rel. This commit implements
R_AARCH64_TLSDESC cases for AArch64::getImplicitAddend() and
AArch64::relocate(). However, there are probably further relocation types
that need to be handled for full support of -z rel.
Fixes https://bugs.llvm.org/show_bug.cgi?id=47009
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D100544
I found this missing case with the new --check-dynamic-relocation flag
while running the lld tests with --apply-dynamic-relocs enabled by default.
This is the same as D101452 just for RISC-V
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101454
I found this missing case with the new --check-dynamic-relocation flag
while running the lld tests with --apply-dynamic-relocs enabled by default.
This also fixes a broken CHECK in lld/test/ELF/x86-64-gotpc-relax.s:
The test wasn't using CHECK-NEXT, so it was passing despite the output
actually containing relocations. I am not sure when this changed, but I
think this behaviour is correct.
Found with D101450 + enabling --apply-dynamic-relocs by default.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101452
There used to be many cases where addends for Elf_Rel were not emitted in
the final object file (mostly when building for MIPS64 since the input .o
files use RELA but the output uses REL). These cases have been fixed since,
but this patch adds a check to ensure that the written values are correct.
It is based on a previous patch that I added to the CHERI fork of LLD since
we were using MIPS64 as a baseline. The work has now almost entirely
shifted to RISC-V and Arm Morello (which use Elf_Rela), but I thought
it would be useful to upstream our local changes anyway.
This patch adds a (hidden) command line flag --check-dynamic-relocations
that can be used to enable these checks. It is also on by default in
assertions builds for targets that handle all dynamic relocations kinds
that LLD can emit in Target::getImplicitAddend(). Currently this is
enabled for ARM, MIPS, and I386.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101450
D62727 removed GotEntrySize and GotPltEntrySize with a comment that they
are always equal to wordsize(), but that is not entirely true: X32 has a
word size of 4, but needs 8-byte GOT entries. This restores gotEntrySize
for both, adjusted for current naming conventions, but defaults it to
config->wordsize to keep things simple for architectures other than
x86_64.
This partially reverts D62727.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D102509
The `e_flags` for a ELF file targeting the AVR ISA contains two fields at the time of writing:
- A 7-bit integer field specifying the ISA revision being targeted
- A 1-bit flag specifying whether the object files being linked are suited for applying the relaxations at link time
The linked ELF file is blessed with the arch revision shared among all the files.
The behaviour in case of mismatch is purposefully different than the one implemented in libbfd: LLD will raise a fatal error while libbfd silently picks a default value of `avr2`.
The relaxation-ready flag is handled as done by libbfd, in order for it to appear in the linked object every source object must be tagged with it.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D99754
There is a bug when initial exec is relaxed to local exec.
In the following situation:
InitExec.c
```
extern __thread unsigned TGlobal;
unsigned getConst(unsigned*);
unsigned addVal(unsigned, unsigned*);
unsigned GetAddrT() {
return addVal(getConst(&TGlobal), &TGlobal);
}
```
Def.c
```
__thread unsigned TGlobal;
unsigned getConst(unsigned* A) {
return *A + 3;
}
unsigned addVal(unsigned A, unsigned* B) {
return A + *B;
}
```
The problem is in InitExec.c but Def.c is required if you want to link the example and see the problem.
To compile everything:
```
clang -O3 -mcpu=pwr10 -c InitExec.c
clang -O3 -mcpu=pwr10 -c Def.c
ld.lld InitExec.o Def.o -o IeToLe
```
If you objdump the problem object file:
```
$ llvm-objdump -dr --mcpu=pwr10 InitExec.o
```
you will get the following assembly:
```
0000000000000000 <GetAddrT>:
0: a6 02 08 7c mflr 0
4: f0 ff c1 fb std 30, -16(1)
8: 10 00 01 f8 std 0, 16(1)
c: d1 ff 21 f8 stdu 1, -48(1)
10: 00 00 10 04 00 00 60 e4 pld 3, 0(0), 1
0000000000000010: R_PPC64_GOT_TPREL_PCREL34 TGlobal
18: 14 6a c3 7f add 30, 3, 13
0000000000000019: R_PPC64_TLS TGlobal
1c: 78 f3 c3 7f mr 3, 30
20: 01 00 00 48 bl 0x20
0000000000000020: R_PPC64_REL24_NOTOC getConst
24: 78 f3 c4 7f mr 4, 30
28: 30 00 21 38 addi 1, 1, 48
2c: 10 00 01 e8 ld 0, 16(1)
30: f0 ff c1 eb ld 30, -16(1)
34: a6 03 08 7c mtlr 0
38: 00 00 00 48 b 0x38
0000000000000038: R_PPC64_REL24_NOTOC addVal
```
The lines of interest are:
```
10: 00 00 10 04 00 00 60 e4 pld 3, 0(0), 1
0000000000000010: R_PPC64_GOT_TPREL_PCREL34 TGlobal
18: 14 6a c3 7f add 30, 3, 13
0000000000000019: R_PPC64_TLS TGlobal
1c: 78 f3 c3 7f mr 3, 30
```
Which once linked gets turned into:
```
10010210: ff ff 03 06 00 90 6d 38 paddi 3, 13, -28672, 0
10010218: 00 00 00 60 nop
1001021c: 78 f3 c3 7f mr 3, 30
```
The problem is that register 30 is never set after the optimization.
Therefore it is not correct to relax the above instructions by replacing
the add instruction with a nop.
Instead the add instruction should be replaced with a copy (mr) instruction.
If the add uses the same resgiter as input and as ouput then it is safe to
continue to replace the add with a nop.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D95262
In AArch32 ARM, the PC reads two instructions ahead of the currently
executiing instruction. This evaluates to 8 in ARM state and 4 in
Thumb state. Branch instructions on AArch32 compensate for this by
subtracting the PC bias from the addend. For a branch to symbol this
will result in an addend of -8 in ARM state and -4 in Thumb state.
The existing ARM Target::inBranchRange function accounted for this
implict addend within the function meaning that if the addend were
to be taken into account by the caller then it would be double
counted. This complicates the interface for all Targets as callers
wanting to account for addends had to account for the ARM PC-bias.
In certain situations such as:
https://github.com/ClangBuiltLinux/linux/issues/1305
the PC-bias compensation code didn't match up. In particular
normalizeExistingThunk() didn't put the PC-bias back in as Arm
thunks did not store the addend.
The simplest fix for the problem is to add the PC bias in
normalizeExistingThunk when restoring the addend. However I think
it is worth refactoring the Arm inBranchRange implementation so
that fewer calls to getPCBias are needed for other Targets. I
wasn't able to remove getPCBias completely but hopefully the
Relocations.cpp code is simpler now.
In principle a test could be written to replicate the linux kernel
build failure but I wasn't able to reproduce with a small example
that I could build up from scratch.
Fixes https://github.com/ClangBuiltLinux/linux/issues/1305
Differential Revision: https://reviews.llvm.org/D97550
R_PPC64_ADDR16_HI represents bits 16-31 of a 32-bit value
R_PPC64_ADDR16_HIGH represents bits 16-31 of a 64-bit value.
In the Linux kernel, `LOAD_REG_IMMEDIATE_SYM` defined in `arch/powerpc/include/asm/ppc_asm.h`
uses @l, @high, @higher, @highest to load the 64-bit value of a symbol.
Fixes https://github.com/ClangBuiltLinux/linux/issues/1260
The commit 18aa0be36e changed the default GotBaseSymInGotPlt to true
for AArch64. This is different than binutils, where
_GLOBAL_OFFSET_TABLE_ points at the start or .got.
It seems to not intefere with current relocations used by LLVM. However
as indicated by PR#40357 [1] gcc generates R_AARCH64_LD64_GOTPAGE_LO15
for -pie (in fact it also generated the relocation for -fpic).
This change is requires to correctly handle R_AARCH64_LD64_GOTPAGE_LO15
by lld from objects generated by gcc.
[1] https://bugs.llvm.org/show_bug.cgi?id=40357
The scope of R_TLS (TP offset relocation types (TPREL/TPOFF) used for the
local-exec TLS model) is actually narrower than its name may imply. R_TLS_NEG
is only used by Solaris R_386_TLS_LE_32.
Rename them so that they will be less confusing.
Reviewed By: grimar, psmith, rprichard
Differential Revision: https://reviews.llvm.org/D93467
clang may produce `movl x@GOTPCREL+4(%rip), %eax` when loading the high 32 bits
of the address of a global variable in -fpic/-fpie mode.
If assembled by GNU as, the fixup emits an R_X86_64_GOTPCRELX with an
addend != -4. The instruction loads from the GOT entry with an offset
and thus it is incorrect to relax the instruction.
If assembled by the integrated assembler, we emit R_X86_64_GOTPCREL for
relocations that definitely cannot be relaxed (D92114), so this patch is not
needed.
This patch disables the relaxation, which is compatible with the implementation in GNU ld
("Add R_X86_64_[REX_]GOTPCRELX support to gas and ld").
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D91993
With this change, `TargetInfo::adjustRelaxExpr` is only related to TLS
relaxations and a subsequent clean-up can delete the `data` parameter.
Differential Revision: https://reviews.llvm.org/D92079
While MC did not produce R_X86_64_GOTPCRELX for test/binop instructions
(movl/adcl/addl/andl/...) before the previous commit, this code path has been
exercised by -fno-integrated-as for GNU as since 2016: -no-pie relaxing
may incorrectly access loc[-3] and produce a corrupted instruction.
Simply handle test/binop R_X86_64_GOTPCRELX like R_X86_64_GOTPCREL.
Add support to LLD for PC Relative Thread Local Storage for Local Dynamic.
This patch adds support for two relocations: R_PPC64_GOT_TLSLD_PCREL34 and
R_PPC64_DTPREL34.
The Local Dynamic code is:
```
pla r3, x@got@tlsld@pcrel R_PPC64_GOT_TLSLD_PCREL34
bl __tls_get_addr@notoc(x@tlsld) R_PPC64_TLSLD
R_PPC64_REL24_NOTOC
...
paddi r9, r3, x@dtprel R_PPC64_DTPREL34
```
After relaxation to Local Exec:
```
paddi r3, r13, 0x1000
nop
...
paddi r9, r3, x@dtprel R_PPC64_DTPREL34
```
Reviewed By: NeHuang, sfertile
Differential Revision: https://reviews.llvm.org/D87504
Add Thread Local Storage support for the 34 bit relocation R_PPC64_GOT_TLSGD_PCREL34 used in General Dynamic.
The compiler will produce code that looks like:
```
pla r3, x@got@tlsgd@pcrel R_PPC64_GOT_TLSGD_PCREL34
bl __tls_get_addr@notoc(x@tlsgd) R_PPC64_TLSGD
R_PPC64_REL24_NOTOC
```
LLD should be able to correctly compute the relocation for R_PPC64_GOT_TLSGD_PCREL34 as well as do the following two relaxations where possible:
General Dynamic to Local Exec:
```
paddi r3, r13, x@tprel
nop
```
and General Dynamic to Initial Exec:
```
pld r3, x@got@tprel@pcrel
add r3, r3, r13
```
Note:
This patch adds support for the PC Relative (no TOC) version of General Dynamic on top of the existing support for the TOC version of General Dynamic.
The ABI does not provide any way to tell by looking only at the relocation `R_PPC64_TLSGD` when it is being used in a TOC instruction sequence or and when it is being used in a no TOC sequence. The TOC sequence should always be 4 byte aligned. This patch adds one to the offset of the relocation when it is being used in a no TOC sequence. In this way LLD can tell by looking at the alignment of the offset of `R_PPC64_TLSGD` whether or not it is being used as part of a TOC or no TOC sequence.
Reviewed By: NeHuang, sfertile, MaskRay
Differential Revision: https://reviews.llvm.org/D87318
Add Thread Local Storage support for the 34 bit relocation R_PPC64_GOT_TLSGD_PCREL34 used in General Dynamic.
The compiler will produce code that looks like:
```
pla r3, x@got@tlsgd@pcrel R_PPC64_GOT_TLSGD_PCREL34
bl __tls_get_addr@notoc(x@tlsgd) R_PPC64_TLSGD
R_PPC64_REL24_NOTOC
```
LLD should be able to correctly compute the relocation for R_PPC64_GOT_TLSGD_PCREL34 as well as do the following two relaxations where possible:
General Dynamic to Local Exec:
```
paddi r3, r13, x@tprel
nop
```
and General Dynamic to Initial Exec:
```
pld r3, x@got@tprel@pcrel
add r3, r3, r13
```
Note:
This patch adds support for the PC Relative (no TOC) version of General Dynamic on top of the existing support for the TOC version of General Dynamic.
The ABI does not provide any way to tell by looking only at the relocation `R_PPC64_TLSGD` when it is being used in a TOC instruction sequence or and when it is being used in a no TOC sequence. The TOC sequence should always be 4 byte aligned. This patch adds one to the offset of the relocation when it is being used in a no TOC sequence. In this way LLD can tell by looking at the alignment of the offset of `R_PPC64_TLSGD` whether or not it is being used as part of a TOC or no TOC sequence.
Reviewed By: NeHuang, sfertile, MaskRay
Differential Revision: https://reviews.llvm.org/D87318
Add Thread Local Storage Initial Exec support to LLD.
This patch adds the computation for the relocations as well as the relaxation from Initial Exec to Local Exec.
Initial Exec:
```
pld r9, x@got@tprel@pcrel
add r9, r9, x@tls@pcrel
```
or
```
pld r9, x@got@tprel@pcrel
lbzx r10, r9, x@tls@pcrel
```
Note that @tls@pcrel is actually encoded as R_PPC64_TLS with a one byte displacement.
For the above examples relaxing Intitial Exec to Local Exec:
```
paddi r9, r9, x@tprel
nop
```
or
```
paddi r9, r13, x@tprel
lbz r10, 0(r9)
```
Reviewed By: nemanjai, MaskRay, #powerpc
Differential Revision: https://reviews.llvm.org/D86893
Fangrui Song