This frequently leads to cases like:
ldr xD, [xN, :lo12:var]
add xA, xN, :lo12:var
ldr xD, [xA, #8]
where the ADD would have been needed anyway, and the two distinct addressing
modes can prevent the formation of an ldp. Because of how we handle ADRP
(aggressively forming an ADRP/ADD pseudo-inst at ISel time), this pattern also
results in duplicated ADRP instructions (one on its own to cover the ldr, and
one combined with the add).
llvm-svn: 223172
Such loops shouldn't be vectorized due to the loops form.
After applying loop-rotate (+simplifycfg) the tests again start to check
what they are intended to check.
llvm-svn: 223170
4i32 shuffles for single insertions into zero vectors lowers to X86vzmovl which was using (v)blendps - causing domain switch stalls. This patch fixes this by using (v)pblendw instead.
The updated tests on test/CodeGen/X86/sse41.ll still contain a domain stall due to the use of insertps - I'm looking at fixing this in a future patch.
Differential Revision: http://reviews.llvm.org/D6458
llvm-svn: 223165
We've long supported readcyclecounter on PPC64, but it is easier there (the
read of the 64-bit time-base register can be accomplished via a single
instruction). This now provides an implementation for PPC32 as well. On PPC32,
the time-base register is still 64 bits, but can only be read 32 bits at a time
via two separate SPRs. The ISA manual explains how to do this properly (it
involves re-reading the upper bits and looping if the counter has wrapped while
being read).
This requires PPC to implement a custom integer splitting legalization for the
READCYCLECOUNTER node, turning it into a target-specific SDAG node, which then
gets turned into a pseudo-instruction, which is then expanded to the necessary
sequence (which has three SPR reads, the comparison and the branch).
Thanks to Paul Hargrove for pointing out to me that this was still unimplemented.
llvm-svn: 223161
Reduce the number of nops emitted for stackmap shadows on AArch64 by counting
non-stackmap instructions up to the next branch target towards the requested
shadow.
<rdar://problem/14959522>
llvm-svn: 223156
Summary:
Like N32/N64, they must be passed in the upper bits of the register.
The new code could be merged with the existing if-statements but I've
refrained from doing this since it will make porting the O32 implementation
to tablegen harder later.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6463
llvm-svn: 223148
Previously .cpu directive in ARM assembler didnt switch to the new CPU and
therefore acted as a nop. This implemented real action for .cpu and eg.
allows to assembler FreeBSD kernel with -integrated-as.
llvm-svn: 223147
This is the third patch in a small series. It contains the CodeGen support for lowering the gc.statepoint intrinsic sequences (223078) to the STATEPOINT pseudo machine instruction (223085). The change also includes the set of helper routines and classes for working with gc.statepoints, gc.relocates, and gc.results since the lowering code uses them.
With this change, gc.statepoints should be functionally complete. The documentation will follow in the fourth change, and there will likely be some cleanup changes, but interested parties can start experimenting now.
I'm not particularly happy with the amount of code or complexity involved with the lowering step, but at least it's fairly well isolated. The statepoint lowering code is split into it's own files and anyone not working on the statepoint support itself should be able to ignore it.
During the lowering process, we currently spill aggressively to stack. This is not entirely ideal (and we have plans to do better), but it's functional, relatively straight forward, and matches closely the implementations of the patchpoint intrinsics. Most of the complexity comes from trying to keep relocated copies of values in the same stack slots across statepoints. Doing so avoids the insertion of pointless load and store instructions to reshuffle the stack. The current implementation isn't as effective as I'd like, but it is functional and 'good enough' for many common use cases.
In the long term, I'd like to figure out how to integrate the statepoint lowering with the register allocator. In principal, we shouldn't need to eagerly spill at all. The register allocator should do any spilling required and the statepoint should simply record that fact. Depending on how challenging that turns out to be, we may invest in a smarter global stack slot assignment mechanism as a stop gap measure.
Reviewed by: atrick, ributzka
llvm-svn: 223137
Follow up from r222926. Also handle multiple destinations from merged
cases on multiple and subsequent phi instructions.
rdar://problem/19106978
llvm-svn: 223135
Go through implicit defs of CSMI and MI, and clear the kill flags on
their uses in all the instructions between CSMI and MI.
We might have made some of the kill flags redundant, consider:
subs ... %NZCV<imp-def> <- CSMI
csinc ... %NZCV<imp-use,kill> <- this kill flag isn't valid anymore
subs ... %NZCV<imp-def> <- MI, to be eliminated
csinc ... %NZCV<imp-use,kill>
Since we eliminated MI, and reused a register imp-def'd by CSMI
(here %NZCV), that register, if it was killed before MI, should have
that kill flag removed, because it's lifetime was extended.
Also, add an exhaustive testcase for the motivating example.
Reviewed by: Juergen Ributzka <juergen@apple.com>
llvm-svn: 223133
The blocking code originated in ARM, which is more aggressive about casting
types to a canonical representative before doing anything else, so I missed out
most vector HFAs and broke the ABI. This should fix it.
llvm-svn: 223126
Load instructions are inserted into loop preheaders when sinking stores
and later removed if not used by the SSA updater. Avoid sinking if the
loop has no preheader and avoid crashes. This fixes one more side effect
of not handling indirectbr instructions properly on LoopSimplify.
llvm-svn: 223119
Certain ARM instructions accept 32-bit immediate operands encoded as a 8-bit
integer value (0-255) and a 4-bit rotation (0-30, even). Current ARM assembly
syntax support in LLVM allows the decoded (32-bit) immediate to be specified
as a single immediate operand for such instructions:
mov r0, #4278190080
The ARMARM defines an extended assembly syntax allowing the encoding to be made
more explicit, as in:
mov r0, #255, #8 ; (same 32-bit value as above)
The behaviour of the two instructions can be different w.r.t flags, which is
documented under "Modified immediate constants" in ARMARM. This patch enables
support for this extended syntax at the MC layer.
llvm-svn: 223113
The default ARM floating-point mode does not support IEEE 754 mode exactly. Of
relevance to this patch is that input denormals are flushed to zero. The way in
which they're flushed to zero depends on the architecture,
* For VFPv2, it is implementation defined as to whether the sign of zero is
preserved.
* For VFPv3 and above, the sign of zero is always preserved when a denormal
is flushed to zero.
When FP support has been disabled, the strategy taken by this patch is to
assume the software support will mirror the behaviour of the hardware support
for the target *if it existed*. That is, for architectures which can only have
VFPv2, it is assumed the software will flush to positive zero. For later
architectures it is assumed the software will flush to zero preserving sign.
Change-Id: Icc5928633ba222a4ba3ca8c0df44a440445865fd
llvm-svn: 223110
System memory allocation functions, which are identified at the IR level by the
noalias attribute on the return value, must return a pointer into a memory region
disjoint from any other memory accessible to the caller. We can use this
property to simplify pointer comparisons between allocated memory and local
stack addresses and the addresses of global variables. Neither the stack nor
global variables can overlap with the region used by the memory allocator.
Fixes PR21556.
llvm-svn: 223093
The statepoint intrinsics are intended to enable precise root tracking through the compiler as to support garbage collectors of all types. The addition of the statepoint intrinsics to LLVM should have no impact on the compilation of any program which does not contain them. There are no side tables created, no extra metadata, and no inhibited optimizations.
A statepoint works by transforming a call site (or safepoint poll site) into an explicit relocation operation. It is the frontend's responsibility (or eventually the safepoint insertion pass we've developed, but that's not part of this patch series) to ensure that any live pointer to a GC object is correctly added to the statepoint and explicitly relocated. The relocated value is just a normal SSA value (as seen by the optimizer), so merges of relocated and unrelocated values are just normal phis. The explicit relocation operation, the fact the statepoint is assumed to clobber all memory, and the optimizers standard semantics ensure that the relocations flow through IR optimizations correctly.
This is the first patch in a small series. This patch contains only the IR parts; the documentation and backend support will be following separately. The entire series can be seen as one combined whole in http://reviews.llvm.org/D5683.
Reviewed by: atrick, ributzka
llvm-svn: 223078
Summary:
".weak" symbols cannot be consumed by ptxas (PR21685). This patch makes the
weak directive in MCAsmPrinter customizable, and disables emitting ".weak"
symbols for NVPTX.
Test Plan: weak-linkage.ll
Reviewers: jholewinski
Reviewed By: jholewinski
Subscribers: majnemer, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D6455
llvm-svn: 223077
r208210 introduced an optimization that improves the vector select
codegen by doing the setcc on vectors directly.
This is a problem they the setcc operands are i1s, because the
optimization would create vectors of i1, which aren't legal.
Part of PR21549.
Differential Revision: http://reviews.llvm.org/D6308
llvm-svn: 223075
r213378 improved f16 bitcasts, so that they go directly through subregs,
instead of through the stack. That code now causes an assertion failure
for bitcasts from other 16-bits types (most importantly v2i8).
Correct that by doing the custom lowering for i16 bitcasts only when the
input is an f16.
Part of PR21549.
Differential Revision: http://reviews.llvm.org/D6307
llvm-svn: 223074
The MachineVerifier used to check that there was always exactly one
unconditional branch to a non-landingpad (normal) successor.
If that normal successor to an invoke BB is unreachable, it seems
reasonable to only have one successor, the landing pad.
On targets other than AArch64 (and on AArch64 with a different testcase),
the branch folder turns the branch to the landing pad into a fallthrough.
The MachineVerifier, which relies on AnalyzeBranch, is unable to check
the condition, and doesn't complain. However, it does in this specific
testcase, where the branch to the landing pad remained.
Make the MachineVerifier accept it.
llvm-svn: 223059
An unreachable default destination can be exploited by other optimizations, and
SDag lowering is now prepared to handle them efficiently.
For example, branches to the unreachable destination will be optimized away,
such as in the case of range checks for switch lookup tables.
On 64-bit Linux, this reduces the size of a clang bootstrap by 80 kB (and
Chromium by 30 kB).
llvm-svn: 223050
This can significantly reduce the size of the switch, allowing for more
efficient lowering.
I also worked with the idea of exploiting unreachable defaults by
omitting the range check for jump tables, but always ended up with a
non-neglible binary size increase. It might be worth looking into some more.
llvm-svn: 223049
The explicit set of destination types is not fully redundant when lazy loading
since the TypeFinder will not find types used only in function bodies.
This keeps the logic to drop the name of mapped types since it still helps
with avoiding further renaming.
llvm-svn: 223043
Summary:
PowerPC DWARF unwind info defined CFA as SP + offset even in a function
where the stack had been dynamically realigned. This clearly doesn't
work because the offset from SP to CFA is not a constant. Fix it by
defining CFA as BP instead.
This was causing the AddressSanitizer null_deref test to fail 50% of
the time, depending on whether SP happened to be 32-byte aligned on
entry to a particular function or not.
Reviewers: willschm, uweigand, hfinkel
Reviewed By: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6410
llvm-svn: 222996
Add checkDecodedInstruction for post-decode checking of instructions, to catch
the corner cases like HVC that don't fit into the general pattern. Needed to
check for an invalid condition field in instruction encoding despite HVC not
taking a predicate.
Patch by Matthew Wahab.
Change-Id: I48e28de981d7a9e43569594da3c45fb478b4f795
llvm-svn: 222992
This commit fixes a bug in stack protector pass where edge weights were not set
when new basic blocks were added to lists of successor basic blocks.
Differential Revision: http://reviews.llvm.org/D5766
llvm-svn: 222987
Instead of keeping an explicit set, just drop the names of types we choose
to map to some other type.
This has the advantage that the name of the unused will not cause the context
to rename types on module read.
llvm-svn: 222986
Add assembler support for the fixed-point cache-inhibited load/store
instructions. These are hypervisor-level only, so don't get too excited ;)
Fixes PR21650.
llvm-svn: 222976
Tim Northover