line arguments and directories tree. The old toolchain selection heuristics
worked incorrectly when user has a reduced MIPS toolchain supports
the O32 ABI only.
Patch reviewed by Jonathan Roelofs, David Majnemer.
llvm-svn: 202873
This refactors some of the Darwin toolchain classification to give a more solid
distinction between the three primary Darwin platforms (OS X, IOS and IOS
simulator) so that a 4th choice can be added temporarily: embedded MachO
targets.
Longer term, this support will be factored out into a separate class and no
longer classified as "darwin-eabi", but the refactoring should still be useful.
llvm-svn: 197148
By adding a default config.excludes pattern we can avoid individual
suppressions in subdirectories.
This matches LLVM's lit.cfg which also excludes a few other common non-test
filenames for consistency.
llvm-svn: 194814
This adds a new option -fprofile-sample-use=filename to Clang. It
tells the driver to schedule the SampleProfileLoader pass and passes
on the name of the profile file to use.
llvm-svn: 194567
which doesn't use that multilib. As a consequence, fix Clang's support
for cross compiling environments that were relying on this quirk to
ensure the correct library search path ordering.
This also re-instates the new test cases from Rafael's r193528 for
cross-compiling to ARM on Ubuntu 13.10 without any of the changes to the
existing test cases (they were no longer needed).
This solution was the result of a lot of IRC debugging and trying to
understand *exactly* what quirk was being relied upon. It took some time
for me to figure out that it was the use of 'lib32' is a multilib that
was throwing a wrench in the works.
In case you are thinking that its silly to use a multilib of 'lib' at
all, entertainingly, GCC does so as well (you can see it with the
.../lib/../lib/crt1.o pattern it uses), and the 2-phase sequence of
search paths (multilib followed by non-multilib) has observable (if
dubious) consequences. =/ Yuck.
llvm-svn: 193601
With this patch we correctly determine that ubuntu's ARM tree is not biarch
and use "lib" istead of "lib32".
Without this patch the search inside the arm tree for the crt files was failing
and we would end up trying to use the i686 ones in lib32.
llvm-svn: 193528
which add another wrinkle to the installation of the libstdc++ headers.
Add at least some basic testing of the weirdnesses of Gentoo's layout.
llvm-svn: 189212
directory for programs used by the driver is actually the standard
behavior we want to be compatible with GCC cross compilers -- it isn't
specific to SUSE or any other distro.
Also start fleshing out testing of the different cross compilation
patterns, both with a new very bare-bones tree of cross compilers and by
extending the multilib trees. Currently, we don't correctly model doing
a cross compile using the non-triple target of a bi-arch GCC install,
but I'll add support for that (and tests) next.
llvm-svn: 184499
Sourcery CodeBench and modern FSF Mips toolchains require a bit more
complicated algorithm to calculate headers, libraries and sysroot paths
than implemented by Clang driver now. The main problem is that all these
paths depend on a set of command line arguments additionally to a target
triple value. For example, let $TC is a toolchain installation directory.
If we compile big-endian 32-bit mips code, crtbegin.o is in the
$TC/lib/gcc/mips-linux-gnu/4.7.2 folder and the toolchain's linker requires
--sysroot=$TC/mips-linux-gnu/libc argument. If we compile little-endian
32-bit soft-float mips code, crtbegin.o is in the
$TC/lib/gcc/mips-linux-gnu/4.7.2/soft-float/el folder and the toolchain's
linker requires --sysroot=$TC/mips-linux-gnu/libc/soft-float/el argument.
1. Calculate MultiarchSuffix using all necessary command line options and
use this MultiarchSuffix to detect crtbegin.o location in the
GCCInstallationDetector::ScanLibDirForGCCTriple() routine.
2. If a user does not provide --sysroot argument to the driver explicitly,
calculate new sysroot value based on command line options. Then use this
calculated sysroot path:
a. To populate a file search paths list in the Linux::Linux() constructor.
b. To find Mips toolchain specific include headers directories
in the Linux::AddClangSystemIncludeArgs() routine.
c. To provide -–sysroot argument for a linker.
Note:
- The FSF's tree slightly differs (folder names) and is not supported
yet.
- New addExternCSystemIncludeIfExits() routine is a temporary solution.
I plan to move path existence check to the addExternCSystemInclude()
routine by a separate commit.
The patch reviewed by Rafael Espindola.
http://llvm-reviews.chandlerc.com/D644
llvm-svn: 179934
linker via --dynamic-list instead of using --export-dynamic. This reduces the
size of the dynamic symbol table, and thus of the binary (in some cases by up
to ~30%).
llvm-svn: 177783
* Look for i686-linux-android under <sysroot>/lib/gcc.
* This patch also slightly enhance the test suite for
Android GCC toolchain detection.
llvm-svn: 169557
paths
- Inherit from Linux rather than ToolChain
- Override AddClangSystemIncludeArgs and AddClangCXXStdlibIncludeArgs
to properly set include paths.
llvm-svn: 169495
is not a directory, Driver::GetProgramPath() routine does not try to append
the program name as a "path component" to it. It just joins the "prefix" with
the program name and checks the resulting path existence.
The patch reviewed by Rafael Espindola.
llvm-svn: 167114
crtfastmath.o contains routines to set the floating point flags to a faster,
unsafe mode. Linking it in speeds up code dealing with denormals significantly
(PR14024).
For now this is only enabled on linux where I can test it and crtfastmath.o is
widely available. We may want to provide a similar file with compiler-rt
eventually and/or enable it on other platforms too.
llvm-svn: 165240
1. Add mipsel-linux-android to the list of valid MIPS target triples.
2. Add <gcc install path>/mips-r2 to the list of toolchain specific path
prefixes if target is mipsel-linux-android.
The patch reviewed by Logan Chien.
llvm-svn: 165131
The Freescale SDK is based on OpenEmbedded, and this might be useful
for other OpenEmbedded-based configurations as well.
With minor modifications, patch by Tobias von Koch!
llvm-svn: 164177
This change adds detection of C++ headers and libraries paths when
building with the standalone toolchain from Android NDK. They are in a
slightly unusual place.
llvm-svn: 163109
Patch from Michel Dänzer, sent our way via Jeremy Huddleston who added
64-bit support. I just added one other place where powerpc64-linux-gnu
was missing (we only had powerpc64-unknown-linux-gnu).
I've also added a tree to test out the debian multiarch stuff. I don't
use debian regularly, so I'm not certain this is entirely accurate. If
anyone wants to check it against a debian system and fix any
inaccuracies, fire away. This way at least folks can see how this is
*supposed* to be tested.
It'd be particularly good to get the Debian MIPS toolchains tested in
this way.
llvm-svn: 151482
by -target and similar options. As discussed in PR 12026, the change
broke support for target-prefixed tools, i.e. calling x86_64--linux-ld
when compiling for x86_64--linux. Improve the test cases added
originally in r149083 to not require execution, just executable files.
Document the hack with appropiate FIXME comments.
llvm-svn: 151185
both actually tests what it wants to, doesn't have bogus and broken
assertions in it, and is also formatted much more cleanly and
consistently. Probably still some more that can be improved here, but
its much better.
Original commit message:
----
Try to unbreak the FreeBSD toolchain's detection of 32-bit targets
inside a 64-bit freebsd machine with the 32-bit compatibility layer
installed. The FreeBSD image always has the /usr/lib32 directory, so
test for the more concrete existence of crt1.o. Also enhance the tests
for freebsd to clarify what these trees look like and exercise the new
code.
Thanks to all the FreeBSD folks for helping me understand what caused
the failure and how we might fix it. =] That helps a lot. Also, yay
build bots.
llvm-svn: 149011
Original log:
Author: chandlerc <chandlerc@91177308-0d34-0410-b5e6-96231b3b80d8>
Date: Wed Jan 25 21:32:31 2012 +0000
Try to unbreak the FreeBSD toolchain's detection of 32-bit targets
inside a 64-bit freebsd machine with the 32-bit compatibility layer
installed. The FreeBSD image always has the /usr/lib32 directory, so
test for the more concrete existence of crt1.o. Also enhance the tests
for freebsd to clarify what these trees look like and exercise the new
code.
Thanks to all the FreeBSD folks for helping me understand what caused
the failure and how we might fix it. =] That helps a lot. Also, yay
build bots.
llvm-svn: 148993
inside a 64-bit freebsd machine with the 32-bit compatibility layer
installed. The FreeBSD image always has the /usr/lib32 directory, so
test for the more concrete existence of crt1.o. Also enhance the tests
for freebsd to clarify what these trees look like and exercise the new
code.
Thanks to all the FreeBSD folks for helping me understand what caused
the failure and how we might fix it. =] That helps a lot. Also, yay
build bots.
llvm-svn: 148981
freebsd test so that it's behavior isn't dependent on the filesystem of
the host running the tests. This should revive the build bots at least.
The tests and the trees still need a lot of love to make them as useful
and easy to maintain as linux-ld.c.
llvm-svn: 148949
Simon Atanasyan