[SystemZ] Use RXSBG

Extend the previous R.SBG patches to handle XORs.

llvm-svn: 186570

llvm/lib/Target/SystemZ/SystemZISelDAGToDAG.cpp

@@ -241,9 +241,9 @@ class SystemZDAGToDAGISel : public SelectionDAGISel {
   // Return the selected node on success, otherwise return null.
   SDNode *tryRISBGZero(SDNode *N);
 
-  // Try to use RISBG or ROSBG to implement OR node N.  Return the selected
+  // Try to use RISBG or Opcode to implement OR or XOR node N.
-  // node on success, otherwise return null.
+  // Return the selected node on success, otherwise return null.
-  SDNode *tryRISBGOrROSBG(SDNode *N);
+  SDNode *tryRxSBG(SDNode *N, unsigned Opcode);
 
   // If Op0 is null, then Node is a constant that can be loaded using:
   //
@@ -799,8 +799,8 @@ SDNode *SystemZDAGToDAGISel::tryRISBGZero(SDNode *N) {
   return convertTo(SDLoc(N), VT, SDValue(N, 0)).getNode();
 }
 
-SDNode *SystemZDAGToDAGISel::tryRISBGOrROSBG(SDNode *N) {
+SDNode *SystemZDAGToDAGISel::tryRxSBG(SDNode *N, unsigned Opcode) {
-  // Try treating each operand of N as the second operand of RISBG or ROSBG
+  // Try treating each operand of N as the second operand of the RxSBG
   // and see which goes deepest.
   RxSBGOperands RxSBG[] = { N->getOperand(0), N->getOperand(1) };
   unsigned Count[] = { 0, 0 };
@@ -817,15 +817,14 @@ SDNode *SystemZDAGToDAGISel::tryRISBGOrROSBG(SDNode *N) {
   SDValue Op0 = N->getOperand(I ^ 1);
 
   // Prefer IC for character insertions from memory.
-  if ((RxSBG[I].Mask & 0xff) == 0)
+  if (Opcode == SystemZ::ROSBG && (RxSBG[I].Mask & 0xff) == 0)
     if (LoadSDNode *Load = dyn_cast<LoadSDNode>(Op0.getNode()))
       if (Load->getMemoryVT() == MVT::i8)
         return 0;
 
   // See whether we can avoid an AND in the first operand by converting
   // ROSBG to RISBG.
-  unsigned Opcode = SystemZ::ROSBG;
+  if (Opcode == SystemZ::ROSBG && detectOrAndInsertion(Op0, RxSBG[I].Mask))
-  if (detectOrAndInsertion(Op0, RxSBG[I].Mask))
     Opcode = SystemZ::RISBG;
            
   EVT VT = N->getValueType(0);
@@ -913,9 +912,14 @@ SDNode *SystemZDAGToDAGISel::Select(SDNode *Node) {
   switch (Opcode) {
   case ISD::OR:
     if (Node->getOperand(1).getOpcode() != ISD::Constant)
-      ResNode = tryRISBGOrROSBG(Node);
+      ResNode = tryRxSBG(Node, SystemZ::ROSBG);
-    // Fall through.
+    goto or_xor;
+
   case ISD::XOR:
+    if (Node->getOperand(1).getOpcode() != ISD::Constant)
+      ResNode = tryRxSBG(Node, SystemZ::RXSBG);
+    // Fall through.
+  or_xor:
     // If this is a 64-bit operation in which both 32-bit halves are nonzero,
     // split the operation into two.
     if (!ResNode && Node->getValueType(0) == MVT::i64)
@@ -931,6 +935,7 @@ SDNode *SystemZDAGToDAGISel::Select(SDNode *Node) {
   case ISD::ROTL:
   case ISD::SHL:
   case ISD::SRL:
+    if (!ResNode)
       ResNode = tryRISBGZero(Node);
     break;
 

llvm/test/CodeGen/SystemZ/rxsbg-01.ll

@@ -0,0 +1,112 @@
+; Test sequences that can use RXSBG.
+;
+; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
+
+; Test the simple case.
+define i32 @f1(i32 %a, i32 %b) {
+; CHECK-LABEL: f1:
+; CHECK: rxsbg %r2, %r3, 59, 59, 0
+; CHECK: br %r14
+  %andb = and i32 %b, 16
+  %xor = xor i32 %a, %andb
+  ret i32 %xor
+}
+
+; ...and again with i64.
+define i64 @f2(i64 %a, i64 %b) {
+; CHECK-LABEL: f2:
+; CHECK: rxsbg %r2, %r3, 59, 59, 0
+; CHECK: br %r14
+  %andb = and i64 %b, 16
+  %xor = xor i64 %a, %andb
+  ret i64 %xor
+}
+
+; Test a case where wraparound is needed.
+define i32 @f3(i32 %a, i32 %b) {
+; CHECK-LABEL: f3:
+; CHECK: rxsbg %r2, %r3, 63, 60, 0
+; CHECK: br %r14
+  %andb = and i32 %b, -7
+  %xor = xor i32 %a, %andb
+  ret i32 %xor
+}
+
+; ...and again with i64.
+define i64 @f4(i64 %a, i64 %b) {
+; CHECK-LABEL: f4:
+; CHECK: rxsbg %r2, %r3, 63, 60, 0
+; CHECK: br %r14
+  %andb = and i64 %b, -7
+  %xor = xor i64 %a, %andb
+  ret i64 %xor
+}
+
+; Test a case with just a shift.
+define i32 @f6(i32 %a, i32 %b) {
+; CHECK-LABEL: f6:
+; CHECK: rxsbg %r2, %r3, 32, 51, 12
+; CHECK: br %r14
+  %shlb = shl i32 %b, 12
+  %xor = xor i32 %a, %shlb
+  ret i32 %xor
+}
+
+; ...and again with i64.
+define i64 @f7(i64 %a, i64 %b) {
+; CHECK-LABEL: f7:
+; CHECK: rxsbg %r2, %r3, 0, 51, 12
+; CHECK: br %r14
+  %shlb = shl i64 %b, 12
+  %xor = xor i64 %a, %shlb
+  ret i64 %xor
+}
+
+; Test a case with just a rotate (using XOR for the rotate combination too,
+; to test that this kind of rotate does get recognised by the target-
+; independent code).  This can't use RXSBG.
+define i32 @f8(i32 %a, i32 %b) {
+; CHECK-LABEL: f8:
+; CHECK: rll {{%r[0-5]}}
+; CHECK: xr {{%r[0-5]}}
+; CHECK: br %r14
+  %shlb = shl i32 %b, 30
+  %shrb = lshr i32 %b, 2
+  %rotlb = xor i32 %shlb, %shrb
+  %xor = xor i32 %a, %rotlb
+  ret i32 %xor
+}
+
+; ...and again with i64, which can use RXSBG for the rotate.
+define i64 @f9(i64 %a, i64 %b) {
+; CHECK-LABEL: f9:
+; CHECK: rxsbg %r2, %r3, 0, 63, 47
+; CHECK: br %r14
+  %shlb = shl i64 %b, 47
+  %shrb = lshr i64 %b, 17
+  %rotlb = xor i64 %shlb, %shrb
+  %xor = xor i64 %a, %rotlb
+  ret i64 %xor
+}
+
+; Test a case with a shift and AND.
+define i32 @f10(i32 %a, i32 %b) {
+; CHECK-LABEL: f10:
+; CHECK: rxsbg %r2, %r3, 56, 59, 4
+; CHECK: br %r14
+  %shlb = shl i32 %b, 4
+  %andb = and i32 %shlb, 240
+  %xor = xor i32 %a, %andb
+  ret i32 %xor
+}
+
+; ...and again with i64.
+define i64 @f11(i64 %a, i64 %b) {
+; CHECK-LABEL: f11:
+; CHECK: rxsbg %r2, %r3, 56, 59, 4
+; CHECK: br %r14
+  %shlb = shl i64 %b, 4
+  %andb = and i64 %shlb, 240
+  %xor = xor i64 %a, %andb
+  ret i64 %xor
+}