maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/Transforms/LoopReroll/reduction.ll

133 lines
4.9 KiB
LLVM
Raw Normal View History

Add a loop rerolling pass This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The transformation aims to take loops like this: for (int i = 0; i < 3200; i += 5) { a[i] += alpha * b[i]; a[i + 1] += alpha * b[i + 1]; a[i + 2] += alpha * b[i + 2]; a[i + 3] += alpha * b[i + 3]; a[i + 4] += alpha * b[i + 4]; } and turn them into this: for (int i = 0; i < 3200; ++i) { a[i] += alpha * b[i]; } and loops like this: for (int i = 0; i < 500; ++i) { x[3*i] = foo(0); x[3*i+1] = foo(0); x[3*i+2] = foo(0); } and turn them into this: for (int i = 0; i < 1500; ++i) { x[i] = foo(0); } There are two motivations for this transformation: 1. Code-size reduction (especially relevant, obviously, when compiling for code size). 2. Providing greater choice to the loop vectorizer (and generic unroller) to choose the unrolling factor (and a better ability to vectorize). The loop vectorizer can take vector lengths and register pressure into account when choosing an unrolling factor, for example, and a pre-unrolled loop limits that choice. This is especially problematic if the manual unrolling was optimized for a machine different from the current target. The current implementation is limited to single basic-block loops only. The rerolling recognition should work regardless of how the loop iterations are intermixed within the loop body (subject to dependency and side-effect constraints), but the significant restriction is that the order of the instructions in each iteration must be identical. This seems sufficient to capture all current use cases. This pass is not currently enabled by default at any optimization level. llvm-svn: 194939
2013-11-17 07:59:05 +08:00
; RUN: opt < %s -loop-reroll -S | FileCheck %s
target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
target triple = "x86_64-unknown-linux-gnu"
define i32 @foo(i32* nocapture readonly %x) #0 {
entry:
br label %for.body
for.body: ; preds = %entry, %for.body
%indvars.iv = phi i64 [ 0, %entry ], [ %indvars.iv.next, %for.body ]
%r.029 = phi i32 [ 0, %entry ], [ %add12, %for.body ]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx = getelementptr inbounds i32, i32* %x, i64 %indvars.iv
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load i32, i32* %arrayidx, align 4
Add a loop rerolling pass This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The transformation aims to take loops like this: for (int i = 0; i < 3200; i += 5) { a[i] += alpha * b[i]; a[i + 1] += alpha * b[i + 1]; a[i + 2] += alpha * b[i + 2]; a[i + 3] += alpha * b[i + 3]; a[i + 4] += alpha * b[i + 4]; } and turn them into this: for (int i = 0; i < 3200; ++i) { a[i] += alpha * b[i]; } and loops like this: for (int i = 0; i < 500; ++i) { x[3*i] = foo(0); x[3*i+1] = foo(0); x[3*i+2] = foo(0); } and turn them into this: for (int i = 0; i < 1500; ++i) { x[i] = foo(0); } There are two motivations for this transformation: 1. Code-size reduction (especially relevant, obviously, when compiling for code size). 2. Providing greater choice to the loop vectorizer (and generic unroller) to choose the unrolling factor (and a better ability to vectorize). The loop vectorizer can take vector lengths and register pressure into account when choosing an unrolling factor, for example, and a pre-unrolled loop limits that choice. This is especially problematic if the manual unrolling was optimized for a machine different from the current target. The current implementation is limited to single basic-block loops only. The rerolling recognition should work regardless of how the loop iterations are intermixed within the loop body (subject to dependency and side-effect constraints), but the significant restriction is that the order of the instructions in each iteration must be identical. This seems sufficient to capture all current use cases. This pass is not currently enabled by default at any optimization level. llvm-svn: 194939
2013-11-17 07:59:05 +08:00
%add = add nsw i32 %0, %r.029
%1 = or i64 %indvars.iv, 1
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx3 = getelementptr inbounds i32, i32* %x, i64 %1
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load i32, i32* %arrayidx3, align 4
Add a loop rerolling pass This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The transformation aims to take loops like this: for (int i = 0; i < 3200; i += 5) { a[i] += alpha * b[i]; a[i + 1] += alpha * b[i + 1]; a[i + 2] += alpha * b[i + 2]; a[i + 3] += alpha * b[i + 3]; a[i + 4] += alpha * b[i + 4]; } and turn them into this: for (int i = 0; i < 3200; ++i) { a[i] += alpha * b[i]; } and loops like this: for (int i = 0; i < 500; ++i) { x[3*i] = foo(0); x[3*i+1] = foo(0); x[3*i+2] = foo(0); } and turn them into this: for (int i = 0; i < 1500; ++i) { x[i] = foo(0); } There are two motivations for this transformation: 1. Code-size reduction (especially relevant, obviously, when compiling for code size). 2. Providing greater choice to the loop vectorizer (and generic unroller) to choose the unrolling factor (and a better ability to vectorize). The loop vectorizer can take vector lengths and register pressure into account when choosing an unrolling factor, for example, and a pre-unrolled loop limits that choice. This is especially problematic if the manual unrolling was optimized for a machine different from the current target. The current implementation is limited to single basic-block loops only. The rerolling recognition should work regardless of how the loop iterations are intermixed within the loop body (subject to dependency and side-effect constraints), but the significant restriction is that the order of the instructions in each iteration must be identical. This seems sufficient to capture all current use cases. This pass is not currently enabled by default at any optimization level. llvm-svn: 194939
2013-11-17 07:59:05 +08:00
%add4 = add nsw i32 %add, %2
%3 = or i64 %indvars.iv, 2
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx7 = getelementptr inbounds i32, i32* %x, i64 %3
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%4 = load i32, i32* %arrayidx7, align 4
Add a loop rerolling pass This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The transformation aims to take loops like this: for (int i = 0; i < 3200; i += 5) { a[i] += alpha * b[i]; a[i + 1] += alpha * b[i + 1]; a[i + 2] += alpha * b[i + 2]; a[i + 3] += alpha * b[i + 3]; a[i + 4] += alpha * b[i + 4]; } and turn them into this: for (int i = 0; i < 3200; ++i) { a[i] += alpha * b[i]; } and loops like this: for (int i = 0; i < 500; ++i) { x[3*i] = foo(0); x[3*i+1] = foo(0); x[3*i+2] = foo(0); } and turn them into this: for (int i = 0; i < 1500; ++i) { x[i] = foo(0); } There are two motivations for this transformation: 1. Code-size reduction (especially relevant, obviously, when compiling for code size). 2. Providing greater choice to the loop vectorizer (and generic unroller) to choose the unrolling factor (and a better ability to vectorize). The loop vectorizer can take vector lengths and register pressure into account when choosing an unrolling factor, for example, and a pre-unrolled loop limits that choice. This is especially problematic if the manual unrolling was optimized for a machine different from the current target. The current implementation is limited to single basic-block loops only. The rerolling recognition should work regardless of how the loop iterations are intermixed within the loop body (subject to dependency and side-effect constraints), but the significant restriction is that the order of the instructions in each iteration must be identical. This seems sufficient to capture all current use cases. This pass is not currently enabled by default at any optimization level. llvm-svn: 194939
2013-11-17 07:59:05 +08:00
%add8 = add nsw i32 %add4, %4
%5 = or i64 %indvars.iv, 3
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx11 = getelementptr inbounds i32, i32* %x, i64 %5
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%6 = load i32, i32* %arrayidx11, align 4
Add a loop rerolling pass This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The transformation aims to take loops like this: for (int i = 0; i < 3200; i += 5) { a[i] += alpha * b[i]; a[i + 1] += alpha * b[i + 1]; a[i + 2] += alpha * b[i + 2]; a[i + 3] += alpha * b[i + 3]; a[i + 4] += alpha * b[i + 4]; } and turn them into this: for (int i = 0; i < 3200; ++i) { a[i] += alpha * b[i]; } and loops like this: for (int i = 0; i < 500; ++i) { x[3*i] = foo(0); x[3*i+1] = foo(0); x[3*i+2] = foo(0); } and turn them into this: for (int i = 0; i < 1500; ++i) { x[i] = foo(0); } There are two motivations for this transformation: 1. Code-size reduction (especially relevant, obviously, when compiling for code size). 2. Providing greater choice to the loop vectorizer (and generic unroller) to choose the unrolling factor (and a better ability to vectorize). The loop vectorizer can take vector lengths and register pressure into account when choosing an unrolling factor, for example, and a pre-unrolled loop limits that choice. This is especially problematic if the manual unrolling was optimized for a machine different from the current target. The current implementation is limited to single basic-block loops only. The rerolling recognition should work regardless of how the loop iterations are intermixed within the loop body (subject to dependency and side-effect constraints), but the significant restriction is that the order of the instructions in each iteration must be identical. This seems sufficient to capture all current use cases. This pass is not currently enabled by default at any optimization level. llvm-svn: 194939
2013-11-17 07:59:05 +08:00
%add12 = add nsw i32 %add8, %6
%indvars.iv.next = add nuw nsw i64 %indvars.iv, 4
%7 = trunc i64 %indvars.iv.next to i32
%cmp = icmp slt i32 %7, 400
br i1 %cmp, label %for.body, label %for.end
; CHECK-LABEL: @foo
; CHECK: for.body:
; CHECK: %indvar = phi i64 [ %indvar.next, %for.body ], [ 0, %entry ]
; CHECK: %r.029 = phi i32 [ 0, %entry ], [ %add, %for.body ]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
; CHECK: %arrayidx = getelementptr inbounds i32, i32* %x, i64 %indvar
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
; CHECK: %0 = load i32, i32* %arrayidx, align 4
Add a loop rerolling pass This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The transformation aims to take loops like this: for (int i = 0; i < 3200; i += 5) { a[i] += alpha * b[i]; a[i + 1] += alpha * b[i + 1]; a[i + 2] += alpha * b[i + 2]; a[i + 3] += alpha * b[i + 3]; a[i + 4] += alpha * b[i + 4]; } and turn them into this: for (int i = 0; i < 3200; ++i) { a[i] += alpha * b[i]; } and loops like this: for (int i = 0; i < 500; ++i) { x[3*i] = foo(0); x[3*i+1] = foo(0); x[3*i+2] = foo(0); } and turn them into this: for (int i = 0; i < 1500; ++i) { x[i] = foo(0); } There are two motivations for this transformation: 1. Code-size reduction (especially relevant, obviously, when compiling for code size). 2. Providing greater choice to the loop vectorizer (and generic unroller) to choose the unrolling factor (and a better ability to vectorize). The loop vectorizer can take vector lengths and register pressure into account when choosing an unrolling factor, for example, and a pre-unrolled loop limits that choice. This is especially problematic if the manual unrolling was optimized for a machine different from the current target. The current implementation is limited to single basic-block loops only. The rerolling recognition should work regardless of how the loop iterations are intermixed within the loop body (subject to dependency and side-effect constraints), but the significant restriction is that the order of the instructions in each iteration must be identical. This seems sufficient to capture all current use cases. This pass is not currently enabled by default at any optimization level. llvm-svn: 194939
2013-11-17 07:59:05 +08:00
; CHECK: %add = add nsw i32 %0, %r.029
; CHECK: %indvar.next = add i64 %indvar, 1
Fix loop rerolling pass failure with non-consant loop lower bound The loop rerolling pass was failing with an assertion failure from a failed cast on loops like this: void foo(int *A, int *B, int m, int n) { for (int i = m; i < n; i+=4) { A[i+0] = B[i+0] * 4; A[i+1] = B[i+1] * 4; A[i+2] = B[i+2] * 4; A[i+3] = B[i+3] * 4; } } The code was casting the SCEV-expanded code for the new induction variable to a phi-node. When the loop had a non-constant lower bound, the SCEV expander would end the code expansion with an add insted of a phi node and the cast would fail. It looks like the cast to a phi node was only needed to get the induction variable value coming from the backedge to compute the end of loop condition. This patch changes the loop reroller to compare the induction variable to the number of times the backedge is taken instead of the iteration count of the loop. In other words, we stop the loop when the current value of the induction variable == IterationCount-1. Previously, the comparison was comparing the induction variable value from the next iteration == IterationCount. This problem only seems to occur on 32-bit targets. For some reason, the loop is not rerolled on 64-bit targets. PR18290 llvm-svn: 198425
2014-01-04 01:20:01 +08:00
; CHECK: %exitcond = icmp eq i64 %indvar, 399
Add a loop rerolling pass This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The transformation aims to take loops like this: for (int i = 0; i < 3200; i += 5) { a[i] += alpha * b[i]; a[i + 1] += alpha * b[i + 1]; a[i + 2] += alpha * b[i + 2]; a[i + 3] += alpha * b[i + 3]; a[i + 4] += alpha * b[i + 4]; } and turn them into this: for (int i = 0; i < 3200; ++i) { a[i] += alpha * b[i]; } and loops like this: for (int i = 0; i < 500; ++i) { x[3*i] = foo(0); x[3*i+1] = foo(0); x[3*i+2] = foo(0); } and turn them into this: for (int i = 0; i < 1500; ++i) { x[i] = foo(0); } There are two motivations for this transformation: 1. Code-size reduction (especially relevant, obviously, when compiling for code size). 2. Providing greater choice to the loop vectorizer (and generic unroller) to choose the unrolling factor (and a better ability to vectorize). The loop vectorizer can take vector lengths and register pressure into account when choosing an unrolling factor, for example, and a pre-unrolled loop limits that choice. This is especially problematic if the manual unrolling was optimized for a machine different from the current target. The current implementation is limited to single basic-block loops only. The rerolling recognition should work regardless of how the loop iterations are intermixed within the loop body (subject to dependency and side-effect constraints), but the significant restriction is that the order of the instructions in each iteration must be identical. This seems sufficient to capture all current use cases. This pass is not currently enabled by default at any optimization level. llvm-svn: 194939
2013-11-17 07:59:05 +08:00
; CHECK: br i1 %exitcond, label %for.end, label %for.body
; CHECK: ret
for.end: ; preds = %for.body
ret i32 %add12
}
define float @bar(float* nocapture readonly %x) #0 {
entry:
br label %for.body
for.body: ; preds = %entry, %for.body
%indvars.iv = phi i64 [ 0, %entry ], [ %indvars.iv.next, %for.body ]
%r.029 = phi float [ 0.0, %entry ], [ %add12, %for.body ]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx = getelementptr inbounds float, float* %x, i64 %indvars.iv
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load float, float* %arrayidx, align 4
Add a loop rerolling pass This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The transformation aims to take loops like this: for (int i = 0; i < 3200; i += 5) { a[i] += alpha * b[i]; a[i + 1] += alpha * b[i + 1]; a[i + 2] += alpha * b[i + 2]; a[i + 3] += alpha * b[i + 3]; a[i + 4] += alpha * b[i + 4]; } and turn them into this: for (int i = 0; i < 3200; ++i) { a[i] += alpha * b[i]; } and loops like this: for (int i = 0; i < 500; ++i) { x[3*i] = foo(0); x[3*i+1] = foo(0); x[3*i+2] = foo(0); } and turn them into this: for (int i = 0; i < 1500; ++i) { x[i] = foo(0); } There are two motivations for this transformation: 1. Code-size reduction (especially relevant, obviously, when compiling for code size). 2. Providing greater choice to the loop vectorizer (and generic unroller) to choose the unrolling factor (and a better ability to vectorize). The loop vectorizer can take vector lengths and register pressure into account when choosing an unrolling factor, for example, and a pre-unrolled loop limits that choice. This is especially problematic if the manual unrolling was optimized for a machine different from the current target. The current implementation is limited to single basic-block loops only. The rerolling recognition should work regardless of how the loop iterations are intermixed within the loop body (subject to dependency and side-effect constraints), but the significant restriction is that the order of the instructions in each iteration must be identical. This seems sufficient to capture all current use cases. This pass is not currently enabled by default at any optimization level. llvm-svn: 194939
2013-11-17 07:59:05 +08:00
%add = fadd float %0, %r.029
%1 = or i64 %indvars.iv, 1
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx3 = getelementptr inbounds float, float* %x, i64 %1
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load float, float* %arrayidx3, align 4
Add a loop rerolling pass This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The transformation aims to take loops like this: for (int i = 0; i < 3200; i += 5) { a[i] += alpha * b[i]; a[i + 1] += alpha * b[i + 1]; a[i + 2] += alpha * b[i + 2]; a[i + 3] += alpha * b[i + 3]; a[i + 4] += alpha * b[i + 4]; } and turn them into this: for (int i = 0; i < 3200; ++i) { a[i] += alpha * b[i]; } and loops like this: for (int i = 0; i < 500; ++i) { x[3*i] = foo(0); x[3*i+1] = foo(0); x[3*i+2] = foo(0); } and turn them into this: for (int i = 0; i < 1500; ++i) { x[i] = foo(0); } There are two motivations for this transformation: 1. Code-size reduction (especially relevant, obviously, when compiling for code size). 2. Providing greater choice to the loop vectorizer (and generic unroller) to choose the unrolling factor (and a better ability to vectorize). The loop vectorizer can take vector lengths and register pressure into account when choosing an unrolling factor, for example, and a pre-unrolled loop limits that choice. This is especially problematic if the manual unrolling was optimized for a machine different from the current target. The current implementation is limited to single basic-block loops only. The rerolling recognition should work regardless of how the loop iterations are intermixed within the loop body (subject to dependency and side-effect constraints), but the significant restriction is that the order of the instructions in each iteration must be identical. This seems sufficient to capture all current use cases. This pass is not currently enabled by default at any optimization level. llvm-svn: 194939
2013-11-17 07:59:05 +08:00
%add4 = fadd float %add, %2
%3 = or i64 %indvars.iv, 2
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx7 = getelementptr inbounds float, float* %x, i64 %3
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%4 = load float, float* %arrayidx7, align 4
Add a loop rerolling pass This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The transformation aims to take loops like this: for (int i = 0; i < 3200; i += 5) { a[i] += alpha * b[i]; a[i + 1] += alpha * b[i + 1]; a[i + 2] += alpha * b[i + 2]; a[i + 3] += alpha * b[i + 3]; a[i + 4] += alpha * b[i + 4]; } and turn them into this: for (int i = 0; i < 3200; ++i) { a[i] += alpha * b[i]; } and loops like this: for (int i = 0; i < 500; ++i) { x[3*i] = foo(0); x[3*i+1] = foo(0); x[3*i+2] = foo(0); } and turn them into this: for (int i = 0; i < 1500; ++i) { x[i] = foo(0); } There are two motivations for this transformation: 1. Code-size reduction (especially relevant, obviously, when compiling for code size). 2. Providing greater choice to the loop vectorizer (and generic unroller) to choose the unrolling factor (and a better ability to vectorize). The loop vectorizer can take vector lengths and register pressure into account when choosing an unrolling factor, for example, and a pre-unrolled loop limits that choice. This is especially problematic if the manual unrolling was optimized for a machine different from the current target. The current implementation is limited to single basic-block loops only. The rerolling recognition should work regardless of how the loop iterations are intermixed within the loop body (subject to dependency and side-effect constraints), but the significant restriction is that the order of the instructions in each iteration must be identical. This seems sufficient to capture all current use cases. This pass is not currently enabled by default at any optimization level. llvm-svn: 194939
2013-11-17 07:59:05 +08:00
%add8 = fadd float %add4, %4
%5 = or i64 %indvars.iv, 3
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx11 = getelementptr inbounds float, float* %x, i64 %5
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%6 = load float, float* %arrayidx11, align 4
Add a loop rerolling pass This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The transformation aims to take loops like this: for (int i = 0; i < 3200; i += 5) { a[i] += alpha * b[i]; a[i + 1] += alpha * b[i + 1]; a[i + 2] += alpha * b[i + 2]; a[i + 3] += alpha * b[i + 3]; a[i + 4] += alpha * b[i + 4]; } and turn them into this: for (int i = 0; i < 3200; ++i) { a[i] += alpha * b[i]; } and loops like this: for (int i = 0; i < 500; ++i) { x[3*i] = foo(0); x[3*i+1] = foo(0); x[3*i+2] = foo(0); } and turn them into this: for (int i = 0; i < 1500; ++i) { x[i] = foo(0); } There are two motivations for this transformation: 1. Code-size reduction (especially relevant, obviously, when compiling for code size). 2. Providing greater choice to the loop vectorizer (and generic unroller) to choose the unrolling factor (and a better ability to vectorize). The loop vectorizer can take vector lengths and register pressure into account when choosing an unrolling factor, for example, and a pre-unrolled loop limits that choice. This is especially problematic if the manual unrolling was optimized for a machine different from the current target. The current implementation is limited to single basic-block loops only. The rerolling recognition should work regardless of how the loop iterations are intermixed within the loop body (subject to dependency and side-effect constraints), but the significant restriction is that the order of the instructions in each iteration must be identical. This seems sufficient to capture all current use cases. This pass is not currently enabled by default at any optimization level. llvm-svn: 194939
2013-11-17 07:59:05 +08:00
%add12 = fadd float %add8, %6
%indvars.iv.next = add nuw nsw i64 %indvars.iv, 4
%7 = trunc i64 %indvars.iv.next to i32
%cmp = icmp slt i32 %7, 400
br i1 %cmp, label %for.body, label %for.end
; CHECK-LABEL: @bar
; CHECK: for.body:
; CHECK: %indvar = phi i64 [ %indvar.next, %for.body ], [ 0, %entry ]
; CHECK: %r.029 = phi float [ 0.000000e+00, %entry ], [ %add, %for.body ]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
; CHECK: %arrayidx = getelementptr inbounds float, float* %x, i64 %indvar
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
; CHECK: %0 = load float, float* %arrayidx, align 4
Add a loop rerolling pass This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The transformation aims to take loops like this: for (int i = 0; i < 3200; i += 5) { a[i] += alpha * b[i]; a[i + 1] += alpha * b[i + 1]; a[i + 2] += alpha * b[i + 2]; a[i + 3] += alpha * b[i + 3]; a[i + 4] += alpha * b[i + 4]; } and turn them into this: for (int i = 0; i < 3200; ++i) { a[i] += alpha * b[i]; } and loops like this: for (int i = 0; i < 500; ++i) { x[3*i] = foo(0); x[3*i+1] = foo(0); x[3*i+2] = foo(0); } and turn them into this: for (int i = 0; i < 1500; ++i) { x[i] = foo(0); } There are two motivations for this transformation: 1. Code-size reduction (especially relevant, obviously, when compiling for code size). 2. Providing greater choice to the loop vectorizer (and generic unroller) to choose the unrolling factor (and a better ability to vectorize). The loop vectorizer can take vector lengths and register pressure into account when choosing an unrolling factor, for example, and a pre-unrolled loop limits that choice. This is especially problematic if the manual unrolling was optimized for a machine different from the current target. The current implementation is limited to single basic-block loops only. The rerolling recognition should work regardless of how the loop iterations are intermixed within the loop body (subject to dependency and side-effect constraints), but the significant restriction is that the order of the instructions in each iteration must be identical. This seems sufficient to capture all current use cases. This pass is not currently enabled by default at any optimization level. llvm-svn: 194939
2013-11-17 07:59:05 +08:00
; CHECK: %add = fadd float %0, %r.029
; CHECK: %indvar.next = add i64 %indvar, 1
Fix loop rerolling pass failure with non-consant loop lower bound The loop rerolling pass was failing with an assertion failure from a failed cast on loops like this: void foo(int *A, int *B, int m, int n) { for (int i = m; i < n; i+=4) { A[i+0] = B[i+0] * 4; A[i+1] = B[i+1] * 4; A[i+2] = B[i+2] * 4; A[i+3] = B[i+3] * 4; } } The code was casting the SCEV-expanded code for the new induction variable to a phi-node. When the loop had a non-constant lower bound, the SCEV expander would end the code expansion with an add insted of a phi node and the cast would fail. It looks like the cast to a phi node was only needed to get the induction variable value coming from the backedge to compute the end of loop condition. This patch changes the loop reroller to compare the induction variable to the number of times the backedge is taken instead of the iteration count of the loop. In other words, we stop the loop when the current value of the induction variable == IterationCount-1. Previously, the comparison was comparing the induction variable value from the next iteration == IterationCount. This problem only seems to occur on 32-bit targets. For some reason, the loop is not rerolled on 64-bit targets. PR18290 llvm-svn: 198425
2014-01-04 01:20:01 +08:00
; CHECK: %exitcond = icmp eq i64 %indvar, 399
Add a loop rerolling pass This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The transformation aims to take loops like this: for (int i = 0; i < 3200; i += 5) { a[i] += alpha * b[i]; a[i + 1] += alpha * b[i + 1]; a[i + 2] += alpha * b[i + 2]; a[i + 3] += alpha * b[i + 3]; a[i + 4] += alpha * b[i + 4]; } and turn them into this: for (int i = 0; i < 3200; ++i) { a[i] += alpha * b[i]; } and loops like this: for (int i = 0; i < 500; ++i) { x[3*i] = foo(0); x[3*i+1] = foo(0); x[3*i+2] = foo(0); } and turn them into this: for (int i = 0; i < 1500; ++i) { x[i] = foo(0); } There are two motivations for this transformation: 1. Code-size reduction (especially relevant, obviously, when compiling for code size). 2. Providing greater choice to the loop vectorizer (and generic unroller) to choose the unrolling factor (and a better ability to vectorize). The loop vectorizer can take vector lengths and register pressure into account when choosing an unrolling factor, for example, and a pre-unrolled loop limits that choice. This is especially problematic if the manual unrolling was optimized for a machine different from the current target. The current implementation is limited to single basic-block loops only. The rerolling recognition should work regardless of how the loop iterations are intermixed within the loop body (subject to dependency and side-effect constraints), but the significant restriction is that the order of the instructions in each iteration must be identical. This seems sufficient to capture all current use cases. This pass is not currently enabled by default at any optimization level. llvm-svn: 194939
2013-11-17 07:59:05 +08:00
; CHECK: br i1 %exitcond, label %for.end, label %for.body
; CHECK: ret
for.end: ; preds = %for.body
ret float %add12
}
[LoopReroll] Don't crash on dead code If a PHI has no users, don't crash; bail gracefully. This shouldn't happen often, but we can make no guarantees that previous passes didn't leave dead code around. llvm-svn: 229405
2015-02-17 01:01:52 +08:00
define i32 @foo_unusedphi(i32* nocapture readonly %x) #0 {
entry:
br label %for.body
for.body: ; preds = %entry, %for.body
%indvars.iv = phi i64 [ 0, %entry ], [ %indvars.iv.next, %for.body ]
%r.029 = phi i32 [ 0, %entry ], [ %add12, %for.body ]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx = getelementptr inbounds i32, i32* %x, i64 %indvars.iv
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load i32, i32* %arrayidx, align 4
[LoopReroll] Don't crash on dead code If a PHI has no users, don't crash; bail gracefully. This shouldn't happen often, but we can make no guarantees that previous passes didn't leave dead code around. llvm-svn: 229405
2015-02-17 01:01:52 +08:00
%add = add nsw i32 %0, %0
%1 = or i64 %indvars.iv, 1
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx3 = getelementptr inbounds i32, i32* %x, i64 %1
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load i32, i32* %arrayidx3, align 4
[LoopReroll] Don't crash on dead code If a PHI has no users, don't crash; bail gracefully. This shouldn't happen often, but we can make no guarantees that previous passes didn't leave dead code around. llvm-svn: 229405
2015-02-17 01:01:52 +08:00
%add4 = add nsw i32 %add, %2
%3 = or i64 %indvars.iv, 2
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx7 = getelementptr inbounds i32, i32* %x, i64 %3
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%4 = load i32, i32* %arrayidx7, align 4
[LoopReroll] Don't crash on dead code If a PHI has no users, don't crash; bail gracefully. This shouldn't happen often, but we can make no guarantees that previous passes didn't leave dead code around. llvm-svn: 229405
2015-02-17 01:01:52 +08:00
%add8 = add nsw i32 %add4, %4
%5 = or i64 %indvars.iv, 3
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx11 = getelementptr inbounds i32, i32* %x, i64 %5
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%6 = load i32, i32* %arrayidx11, align 4
[LoopReroll] Don't crash on dead code If a PHI has no users, don't crash; bail gracefully. This shouldn't happen often, but we can make no guarantees that previous passes didn't leave dead code around. llvm-svn: 229405
2015-02-17 01:01:52 +08:00
%add12 = add nsw i32 %add8, %6
%indvars.iv.next = add nuw nsw i64 %indvars.iv, 4
%7 = trunc i64 %indvars.iv.next to i32
%cmp = icmp slt i32 %7, 400
br i1 %cmp, label %for.body, label %for.end
; CHECK-LABEL: @foo_unusedphi
; The above is just testing for a crash - no specific output expected.
; CHECK: ret
for.end: ; preds = %for.body
ret i32 %add12
}
Add a loop rerolling pass This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The transformation aims to take loops like this: for (int i = 0; i < 3200; i += 5) { a[i] += alpha * b[i]; a[i + 1] += alpha * b[i + 1]; a[i + 2] += alpha * b[i + 2]; a[i + 3] += alpha * b[i + 3]; a[i + 4] += alpha * b[i + 4]; } and turn them into this: for (int i = 0; i < 3200; ++i) { a[i] += alpha * b[i]; } and loops like this: for (int i = 0; i < 500; ++i) { x[3*i] = foo(0); x[3*i+1] = foo(0); x[3*i+2] = foo(0); } and turn them into this: for (int i = 0; i < 1500; ++i) { x[i] = foo(0); } There are two motivations for this transformation: 1. Code-size reduction (especially relevant, obviously, when compiling for code size). 2. Providing greater choice to the loop vectorizer (and generic unroller) to choose the unrolling factor (and a better ability to vectorize). The loop vectorizer can take vector lengths and register pressure into account when choosing an unrolling factor, for example, and a pre-unrolled loop limits that choice. This is especially problematic if the manual unrolling was optimized for a machine different from the current target. The current implementation is limited to single basic-block loops only. The rerolling recognition should work regardless of how the loop iterations are intermixed within the loop body (subject to dependency and side-effect constraints), but the significant restriction is that the order of the instructions in each iteration must be identical. This seems sufficient to capture all current use cases. This pass is not currently enabled by default at any optimization level. llvm-svn: 194939
2013-11-17 07:59:05 +08:00
attributes #0 = { nounwind readonly uwtable }