maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/lib/Target/PowerPC/PPCLoopPreIncPrep.cpp

526 lines
18 KiB
C++
Raw Normal View History

[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
//===------ PPCLoopPreIncPrep.cpp - Loop Pre-Inc. AM Prep. Pass -----------===//
//
Update the file headers across all of the LLVM projects in the monorepo to reflect the new license. We understand that people may be surprised that we're moving the header entirely to discuss the new license. We checked this carefully with the Foundation's lawyer and we believe this is the correct approach. Essentially, all code in the project is now made available by the LLVM project under our new license, so you will see that the license headers include that license only. Some of our contributors have contributed code under our old license, and accordingly, we have retained a copy of our old license notice in the top-level files in each project and repository. llvm-svn: 351636
2019-01-19 16:50:56 +08:00
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
//
//===----------------------------------------------------------------------===//
//
// This file implements a pass to prepare loops for pre-increment addressing
// modes. Additional PHIs are created for loop induction variables used by
// load/store instructions so that the pre-increment forms can be used.
// Generically, this means transforming loops like this:
// for (int i = 0; i < n; ++i)
// array[i] = c;
// to look like this:
// T *p = array[-1];
// for (int i = 0; i < n; ++i)
// *++p = c;
//===----------------------------------------------------------------------===//
#define DEBUG_TYPE "ppc-loop-preinc-prep"
[AMDGPU, PowerPC, TableGen] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 289282
2016-12-10 06:06:55 +08:00
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
#include "PPC.h"
[AMDGPU, PowerPC, TableGen] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 289282
2016-12-10 06:06:55 +08:00
#include "PPCSubtarget.h"
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
#include "PPCTargetMachine.h"
[PowerPC] Fix PPCLoopPreIncPrep for depth > 1 loops This pass had the same problem as the data-prefetching pass: it was only checking for depth == 1 loops in practice. Fix that, add some debugging statements, and make sure that, when we grab an AddRec, it is for the loop we expect. llvm-svn: 234670
2015-04-11 08:33:08 +08:00
#include "llvm/ADT/DepthFirstIterator.h"
[AMDGPU, PowerPC, TableGen] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 289282
2016-12-10 06:06:55 +08:00
#include "llvm/ADT/SmallPtrSet.h"
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
#include "llvm/ADT/SmallSet.h"
[AMDGPU, PowerPC, TableGen] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 289282
2016-12-10 06:06:55 +08:00
#include "llvm/ADT/SmallVector.h"
[PowerPC] Check if the pre-increment PHI Node already exists Preparations to use the per-increment are sometimes done in the target independent pass Loop Strength Reduction. We try to detect them in the PowerPC specific pass so that they are not done twice and so that we do not add PHIs that are not required. Differential Revision: https://reviews.llvm.org/D36736 llvm-svn: 311332
2017-08-21 21:36:18 +08:00
#include "llvm/ADT/Statistic.h"
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
#include "llvm/Analysis/LoopInfo.h"
#include "llvm/Analysis/ScalarEvolution.h"
#include "llvm/Analysis/ScalarEvolutionExpander.h"
#include "llvm/Analysis/ScalarEvolutionExpressions.h"
Move Analysis/Utils/Local.h back to Transforms Review feedback from r328165. Split out just the one function from the file that's used by Analysis. (As chandlerc pointed out, the original change only moved the header and not the implementation anyway - which was fine for the one function that was used (since it's a template/inlined in the header) but not in general) llvm-svn: 333954
2018-06-05 05:23:21 +08:00
#include "llvm/Transforms/Utils/Local.h"
[AMDGPU, PowerPC, TableGen] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 289282
2016-12-10 06:06:55 +08:00
#include "llvm/IR/BasicBlock.h"
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
#include "llvm/IR/CFG.h"
#include "llvm/IR/Dominators.h"
[AMDGPU, PowerPC, TableGen] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 289282
2016-12-10 06:06:55 +08:00
#include "llvm/IR/Instruction.h"
#include "llvm/IR/Instructions.h"
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
#include "llvm/IR/IntrinsicInst.h"
Make DataLayout Non-Optional in the Module Summary: DataLayout keeps the string used for its creation. As a side effect it is no longer needed in the Module. This is "almost" NFC, the string is no longer canonicalized, you can't rely on two "equals" DataLayout having the same string returned by getStringRepresentation(). Get rid of DataLayoutPass: the DataLayout is in the Module The DataLayout is "per-module", let's enforce this by not duplicating it more than necessary. One more step toward non-optionality of the DataLayout in the module. Make DataLayout Non-Optional in the Module Module->getDataLayout() will never returns nullptr anymore. Reviewers: echristo Subscribers: resistor, llvm-commits, jholewinski Differential Revision: http://reviews.llvm.org/D7992 From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 231270
2015-03-05 02:43:29 +08:00
#include "llvm/IR/Module.h"
[PowerPC] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 291872
2017-01-13 08:58:58 +08:00
#include "llvm/IR/Type.h"
[AMDGPU, PowerPC, TableGen] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 289282
2016-12-10 06:06:55 +08:00
#include "llvm/IR/Value.h"
#include "llvm/Pass.h"
#include "llvm/Support/Casting.h"
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
Re-sort #include lines using my handy dandy ./utils/sort_includes.py script. This is in preparation for changes to lots of include lines. llvm-svn: 229088
2015-02-13 17:09:03 +08:00
#include "llvm/Transforms/Scalar.h"
Transforms: Introduce Transforms/Utils.h rather than spreading the declarations amongst Scalar.h and IPO.h Fixes layering - Transforms/Utils shouldn't depend on including a Scalar or IPO header, because Scalar and IPO depend on Utils. llvm-svn: 328717
2018-03-29 01:44:36 +08:00
#include "llvm/Transforms/Utils.h"
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
#include "llvm/Transforms/Utils/BasicBlockUtils.h"
[PowerPC] Handle loop predecessor invokes If a loop predecessor has an invoke as its terminator, and the return value from that invoke is used to determine the loop iteration space, then we can't insert a computation based on that value in the loop predecessor prior to the terminator (oops). If there's such an invoke, or just no predecessor for that matter, insert a new loop preheader. llvm-svn: 228488
2015-02-07 15:32:58 +08:00
#include "llvm/Transforms/Utils/LoopUtils.h"
[AMDGPU, PowerPC, TableGen] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 289282
2016-12-10 06:06:55 +08:00
#include <cassert>
#include <iterator>
#include <utility>
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
using namespace llvm;
// By default, we limit this to creating 16 PHIs (which is a little over half
// of the allocatable register set).
static cl::opt<unsigned> MaxVars("ppc-preinc-prep-max-vars",
cl::Hidden, cl::init(16),
cl::desc("Potential PHI threshold for PPC preinc loop prep"));
[PowerPC] Check if the pre-increment PHI Node already exists Preparations to use the per-increment are sometimes done in the target independent pass Loop Strength Reduction. We try to detect them in the PowerPC specific pass so that they are not done twice and so that we do not add PHIs that are not required. Differential Revision: https://reviews.llvm.org/D36736 llvm-svn: 311332
2017-08-21 21:36:18 +08:00
STATISTIC(PHINodeAlreadyExists, "PHI node already in pre-increment form");
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
namespace {
class PPCLoopPreIncPrep : public FunctionPass {
public:
static char ID; // Pass ID, replacement for typeid
[AMDGPU, PowerPC, TableGen] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 289282
2016-12-10 06:06:55 +08:00
[PowerPC] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 291872
2017-01-13 08:58:58 +08:00
PPCLoopPreIncPrep() : FunctionPass(ID) {
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
initializePPCLoopPreIncPrepPass(*PassRegistry::getPassRegistry());
}
[PowerPC] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 291872
2017-01-13 08:58:58 +08:00
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
PPCLoopPreIncPrep(PPCTargetMachine &TM) : FunctionPass(ID), TM(&TM) {
initializePPCLoopPreIncPrepPass(*PassRegistry::getPassRegistry());
}
void getAnalysisUsage(AnalysisUsage &AU) const override {
AU.addPreserved<DominatorTreeWrapperPass>();
AU.addRequired<LoopInfoWrapperPass>();
AU.addPreserved<LoopInfoWrapperPass>();
[PM] Port ScalarEvolution to the new pass manager. This change makes ScalarEvolution a stand-alone object and just produces one from a pass as needed. Making this work well requires making the object movable, using references instead of overwritten pointers in a number of places, and other refactorings. I've also wired it up to the new pass manager and added a RUN line to a test to exercise it under the new pass manager. This includes basic printing support much like with other analyses. But there is a big and somewhat scary change here. Prior to this patch ScalarEvolution was never *actually* invalidated!!! Re-running the pass just re-wired up the various other analyses and didn't remove any of the existing entries in the SCEV caches or clear out anything at all. This might seem OK as everything in SCEV that can uses ValueHandles to track updates to the values that serve as SCEV keys. However, this still means that as we ran SCEV over each function in the module, we kept accumulating more and more SCEVs into the cache. At the end, we would have a SCEV cache with every value that we ever needed a SCEV for in the entire module!!! Yowzers. The releaseMemory routine would dump all of this, but that isn't realy called during normal runs of the pipeline as far as I can see. To make matters worse, there *is* actually a key that we don't update with value handles -- there is a map keyed off of Loop*s. Because LoopInfo *does* release its memory from run to run, it is entirely possible to run SCEV over one function, then over another function, and then lookup a Loop* from the second function but find an entry inserted for the first function! Ouch. To make matters still worse, there are plenty of updates that *don't* trip a value handle. It seems incredibly unlikely that today GVN or another pass that invalidates SCEV can update values in *just* such a way that a subsequent run of SCEV will incorrectly find lookups in a cache, but it is theoretically possible and would be a nightmare to debug. With this refactoring, I've fixed all this by actually destroying and recreating the ScalarEvolution object from run to run. Technically, this could increase the amount of malloc traffic we see, but then again it is also technically correct. ;] I don't actually think we're suffering from tons of malloc traffic from SCEV because if we were, the fact that we never clear the memory would seem more likely to have come up as an actual problem before now. So, I've made the simple fix here. If in fact there are serious issues with too much allocation and deallocation, I can work on a clever fix that preserves the allocations (while clearing the data) between each run, but I'd prefer to do that kind of optimization with a test case / benchmark that shows why we need such cleverness (and that can test that we actually make it faster). It's possible that this will make some things faster by making the SCEV caches have higher locality (due to being significantly smaller) so until there is a clear benchmark, I think the simple change is best. Differential Revision: http://reviews.llvm.org/D12063 llvm-svn: 245193
2015-08-17 10:08:17 +08:00
AU.addRequired<ScalarEvolutionWrapperPass>();
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
}
[PowerPC] Check if the pre-increment PHI Node already exists Preparations to use the per-increment are sometimes done in the target independent pass Loop Strength Reduction. We try to detect them in the PowerPC specific pass so that they are not done twice and so that we do not add PHIs that are not required. Differential Revision: https://reviews.llvm.org/D36736 llvm-svn: 311332
2017-08-21 21:36:18 +08:00
bool alreadyPrepared(Loop *L, Instruction* MemI,
const SCEV *BasePtrStartSCEV,
const SCEVConstant *BasePtrIncSCEV);
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
bool runOnFunction(Function &F) override;
bool runOnLoop(Loop *L);
void simplifyLoopLatch(Loop *L);
bool rotateLoop(Loop *L);
private:
[PowerPC] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 291872
2017-01-13 08:58:58 +08:00
PPCTargetMachine *TM = nullptr;
LPM: Stop threading `Pass *` through all of the loop utility APIs. NFC A large number of loop utility functions take a `Pass *` and reach into it to find out which analyses to preserve. There are a number of problems with this: - The APIs have access to pretty well any Pass state they want, so it's hard to tell what they may or may not do. - Other APIs have copied these and pass around a `Pass *` even though they don't even use it. Some of these just hand a nullptr to the API since the callers don't even have a pass available. - Passes in the new pass manager don't work like the current ones, so the APIs can't be used as is there. Instead, we should explicitly thread the analysis results that we actually care about through these APIs. This is both simpler and more reusable. llvm-svn: 255669
2015-12-16 03:40:57 +08:00
DominatorTree *DT;
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
LoopInfo *LI;
ScalarEvolution *SE;
LPM: Stop threading `Pass *` through all of the loop utility APIs. NFC A large number of loop utility functions take a `Pass *` and reach into it to find out which analyses to preserve. There are a number of problems with this: - The APIs have access to pretty well any Pass state they want, so it's hard to tell what they may or may not do. - Other APIs have copied these and pass around a `Pass *` even though they don't even use it. Some of these just hand a nullptr to the API since the callers don't even have a pass available. - Passes in the new pass manager don't work like the current ones, so the APIs can't be used as is there. Instead, we should explicitly thread the analysis results that we actually care about through these APIs. This is both simpler and more reusable. llvm-svn: 255669
2015-12-16 03:40:57 +08:00
bool PreserveLCSSA;
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
};
[AMDGPU, PowerPC, TableGen] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 289282
2016-12-10 06:06:55 +08:00
} // end anonymous namespace
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
char PPCLoopPreIncPrep::ID = 0;
Make helper functions/classes/globals static. NFC. llvm-svn: 228410
2015-02-07 01:51:54 +08:00
static const char *name = "Prepare loop for pre-inc. addressing modes";
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
INITIALIZE_PASS_BEGIN(PPCLoopPreIncPrep, DEBUG_TYPE, name, false, false)
INITIALIZE_PASS_DEPENDENCY(LoopInfoWrapperPass)
[PM] Port ScalarEvolution to the new pass manager. This change makes ScalarEvolution a stand-alone object and just produces one from a pass as needed. Making this work well requires making the object movable, using references instead of overwritten pointers in a number of places, and other refactorings. I've also wired it up to the new pass manager and added a RUN line to a test to exercise it under the new pass manager. This includes basic printing support much like with other analyses. But there is a big and somewhat scary change here. Prior to this patch ScalarEvolution was never *actually* invalidated!!! Re-running the pass just re-wired up the various other analyses and didn't remove any of the existing entries in the SCEV caches or clear out anything at all. This might seem OK as everything in SCEV that can uses ValueHandles to track updates to the values that serve as SCEV keys. However, this still means that as we ran SCEV over each function in the module, we kept accumulating more and more SCEVs into the cache. At the end, we would have a SCEV cache with every value that we ever needed a SCEV for in the entire module!!! Yowzers. The releaseMemory routine would dump all of this, but that isn't realy called during normal runs of the pipeline as far as I can see. To make matters worse, there *is* actually a key that we don't update with value handles -- there is a map keyed off of Loop*s. Because LoopInfo *does* release its memory from run to run, it is entirely possible to run SCEV over one function, then over another function, and then lookup a Loop* from the second function but find an entry inserted for the first function! Ouch. To make matters still worse, there are plenty of updates that *don't* trip a value handle. It seems incredibly unlikely that today GVN or another pass that invalidates SCEV can update values in *just* such a way that a subsequent run of SCEV will incorrectly find lookups in a cache, but it is theoretically possible and would be a nightmare to debug. With this refactoring, I've fixed all this by actually destroying and recreating the ScalarEvolution object from run to run. Technically, this could increase the amount of malloc traffic we see, but then again it is also technically correct. ;] I don't actually think we're suffering from tons of malloc traffic from SCEV because if we were, the fact that we never clear the memory would seem more likely to have come up as an actual problem before now. So, I've made the simple fix here. If in fact there are serious issues with too much allocation and deallocation, I can work on a clever fix that preserves the allocations (while clearing the data) between each run, but I'd prefer to do that kind of optimization with a test case / benchmark that shows why we need such cleverness (and that can test that we actually make it faster). It's possible that this will make some things faster by making the SCEV caches have higher locality (due to being significantly smaller) so until there is a clear benchmark, I think the simple change is best. Differential Revision: http://reviews.llvm.org/D12063 llvm-svn: 245193
2015-08-17 10:08:17 +08:00
INITIALIZE_PASS_DEPENDENCY(ScalarEvolutionWrapperPass)
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
INITIALIZE_PASS_END(PPCLoopPreIncPrep, DEBUG_TYPE, name, false, false)
FunctionPass *llvm::createPPCLoopPreIncPrepPass(PPCTargetMachine &TM) {
return new PPCLoopPreIncPrep(TM);
}
namespace {
[AMDGPU, PowerPC, TableGen] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 289282
2016-12-10 06:06:55 +08:00
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
struct BucketElement {
BucketElement(const SCEVConstant *O, Instruction *I) : Offset(O), Instr(I) {}
BucketElement(Instruction *I) : Offset(nullptr), Instr(I) {}
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
const SCEVConstant *Offset;
Instruction *Instr;
};
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
struct Bucket {
Bucket(const SCEV *B, Instruction *I) : BaseSCEV(B),
Elements(1, BucketElement(I)) {}
const SCEV *BaseSCEV;
SmallVector<BucketElement, 16> Elements;
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
};
[AMDGPU, PowerPC, TableGen] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 289282
2016-12-10 06:06:55 +08:00
} // end anonymous namespace
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
static bool IsPtrInBounds(Value *BasePtr) {
Value *StrippedBasePtr = BasePtr;
while (BitCastInst *BC = dyn_cast<BitCastInst>(StrippedBasePtr))
StrippedBasePtr = BC->getOperand(0);
if (GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(StrippedBasePtr))
return GEP->isInBounds();
return false;
}
static Value *GetPointerOperand(Value *MemI) {
if (LoadInst *LMemI = dyn_cast<LoadInst>(MemI)) {
return LMemI->getPointerOperand();
} else if (StoreInst *SMemI = dyn_cast<StoreInst>(MemI)) {
return SMemI->getPointerOperand();
} else if (IntrinsicInst *IMemI = dyn_cast<IntrinsicInst>(MemI)) {
if (IMemI->getIntrinsicID() == Intrinsic::prefetch)
return IMemI->getArgOperand(0);
}
[AMDGPU, PowerPC, TableGen] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 289282
2016-12-10 06:06:55 +08:00
return nullptr;
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
}
bool PPCLoopPreIncPrep::runOnFunction(Function &F) {
Add optimization bisect opt-in calls for PowerPC passes Differential Revision: http://reviews.llvm.org/D19554 llvm-svn: 267769
2016-04-28 03:39:32 +08:00
if (skipFunction(F))
return false;
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
LI = &getAnalysis<LoopInfoWrapperPass>().getLoopInfo();
[PM] Port ScalarEvolution to the new pass manager. This change makes ScalarEvolution a stand-alone object and just produces one from a pass as needed. Making this work well requires making the object movable, using references instead of overwritten pointers in a number of places, and other refactorings. I've also wired it up to the new pass manager and added a RUN line to a test to exercise it under the new pass manager. This includes basic printing support much like with other analyses. But there is a big and somewhat scary change here. Prior to this patch ScalarEvolution was never *actually* invalidated!!! Re-running the pass just re-wired up the various other analyses and didn't remove any of the existing entries in the SCEV caches or clear out anything at all. This might seem OK as everything in SCEV that can uses ValueHandles to track updates to the values that serve as SCEV keys. However, this still means that as we ran SCEV over each function in the module, we kept accumulating more and more SCEVs into the cache. At the end, we would have a SCEV cache with every value that we ever needed a SCEV for in the entire module!!! Yowzers. The releaseMemory routine would dump all of this, but that isn't realy called during normal runs of the pipeline as far as I can see. To make matters worse, there *is* actually a key that we don't update with value handles -- there is a map keyed off of Loop*s. Because LoopInfo *does* release its memory from run to run, it is entirely possible to run SCEV over one function, then over another function, and then lookup a Loop* from the second function but find an entry inserted for the first function! Ouch. To make matters still worse, there are plenty of updates that *don't* trip a value handle. It seems incredibly unlikely that today GVN or another pass that invalidates SCEV can update values in *just* such a way that a subsequent run of SCEV will incorrectly find lookups in a cache, but it is theoretically possible and would be a nightmare to debug. With this refactoring, I've fixed all this by actually destroying and recreating the ScalarEvolution object from run to run. Technically, this could increase the amount of malloc traffic we see, but then again it is also technically correct. ;] I don't actually think we're suffering from tons of malloc traffic from SCEV because if we were, the fact that we never clear the memory would seem more likely to have come up as an actual problem before now. So, I've made the simple fix here. If in fact there are serious issues with too much allocation and deallocation, I can work on a clever fix that preserves the allocations (while clearing the data) between each run, but I'd prefer to do that kind of optimization with a test case / benchmark that shows why we need such cleverness (and that can test that we actually make it faster). It's possible that this will make some things faster by making the SCEV caches have higher locality (due to being significantly smaller) so until there is a clear benchmark, I think the simple change is best. Differential Revision: http://reviews.llvm.org/D12063 llvm-svn: 245193
2015-08-17 10:08:17 +08:00
SE = &getAnalysis<ScalarEvolutionWrapperPass>().getSE();
LPM: Stop threading `Pass *` through all of the loop utility APIs. NFC A large number of loop utility functions take a `Pass *` and reach into it to find out which analyses to preserve. There are a number of problems with this: - The APIs have access to pretty well any Pass state they want, so it's hard to tell what they may or may not do. - Other APIs have copied these and pass around a `Pass *` even though they don't even use it. Some of these just hand a nullptr to the API since the callers don't even have a pass available. - Passes in the new pass manager don't work like the current ones, so the APIs can't be used as is there. Instead, we should explicitly thread the analysis results that we actually care about through these APIs. This is both simpler and more reusable. llvm-svn: 255669
2015-12-16 03:40:57 +08:00
auto *DTWP = getAnalysisIfAvailable<DominatorTreeWrapperPass>();
DT = DTWP ? &DTWP->getDomTree() : nullptr;
PreserveLCSSA = mustPreserveAnalysisID(LCSSAID);
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
bool MadeChange = false;
[PowerPC] Really iterate over all loops in PPCLoopDataPrefetch/PPCLoopPreIncPrep When I fixed these a couple of days ago to iterate over all loops, not just depth == 1 loops, I inadvertently made it such that we'd only look at the first top-level loop. Make sure that we really look at all of them. llvm-svn: 234705
2015-04-13 01:18:56 +08:00
for (auto I = LI->begin(), IE = LI->end(); I != IE; ++I)
for (auto L = df_begin(*I), LE = df_end(*I); L != LE; ++L)
MadeChange |= runOnLoop(*L);
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
return MadeChange;
}
[PowerPC] Check if the pre-increment PHI Node already exists Preparations to use the per-increment are sometimes done in the target independent pass Loop Strength Reduction. We try to detect them in the PowerPC specific pass so that they are not done twice and so that we do not add PHIs that are not required. Differential Revision: https://reviews.llvm.org/D36736 llvm-svn: 311332
2017-08-21 21:36:18 +08:00
// In order to prepare for the pre-increment a PHI is added.
// This function will check to see if that PHI already exists and will return
// true if it found an existing PHI with the same start and increment as the
// one we wanted to create.
bool PPCLoopPreIncPrep::alreadyPrepared(Loop *L, Instruction* MemI,
const SCEV *BasePtrStartSCEV,
const SCEVConstant *BasePtrIncSCEV) {
BasicBlock *BB = MemI->getParent();
if (!BB)
return false;
BasicBlock *PredBB = L->getLoopPredecessor();
BasicBlock *LatchBB = L->getLoopLatch();
if (!PredBB || !LatchBB)
return false;
// Run through the PHIs and see if we have some that looks like a preparation
iterator_range<BasicBlock::phi_iterator> PHIIter = BB->phis();
for (auto & CurrentPHI : PHIIter) {
PHINode *CurrentPHINode = dyn_cast<PHINode>(&CurrentPHI);
if (!CurrentPHINode)
continue;
if (!SE->isSCEVable(CurrentPHINode->getType()))
continue;
const SCEV *PHISCEV = SE->getSCEVAtScope(CurrentPHINode, L);
const SCEVAddRecExpr *PHIBasePtrSCEV = dyn_cast<SCEVAddRecExpr>(PHISCEV);
if (!PHIBasePtrSCEV)
continue;
const SCEVConstant *PHIBasePtrIncSCEV =
dyn_cast<SCEVConstant>(PHIBasePtrSCEV->getStepRecurrence(*SE));
if (!PHIBasePtrIncSCEV)
continue;
if (CurrentPHINode->getNumIncomingValues() == 2) {
if ( (CurrentPHINode->getIncomingBlock(0) == LatchBB &&
CurrentPHINode->getIncomingBlock(1) == PredBB) ||
(CurrentPHINode->getIncomingBlock(1) == LatchBB &&
CurrentPHINode->getIncomingBlock(0) == PredBB) ) {
if (PHIBasePtrSCEV->getStart() == BasePtrStartSCEV &&
PHIBasePtrIncSCEV == BasePtrIncSCEV) {
// The existing PHI (CurrentPHINode) has the same start and increment
// as the PHI that we wanted to create.
++PHINodeAlreadyExists;
return true;
}
}
}
}
return false;
}
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
bool PPCLoopPreIncPrep::runOnLoop(Loop *L) {
bool MadeChange = false;
// Only prep. the inner-most loop
if (!L->empty())
return MadeChange;
Rename DEBUG macro to LLVM_DEBUG. The DEBUG() macro is very generic so it might clash with other projects. The renaming was done as follows: - git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g' - git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM - Manual change to APInt - Manually chage DOCS as regex doesn't match it. In the transition period the DEBUG() macro is still present and aliased to the LLVM_DEBUG() one. Differential Revision: https://reviews.llvm.org/D43624 llvm-svn: 332240
2018-05-14 20:53:11 +08:00
LLVM_DEBUG(dbgs() << "PIP: Examining: " << *L << "\n");
[PowerPC] Fix PPCLoopPreIncPrep for depth > 1 loops This pass had the same problem as the data-prefetching pass: it was only checking for depth == 1 loops in practice. Fix that, add some debugging statements, and make sure that, when we grab an AddRec, it is for the loop we expect. llvm-svn: 234670
2015-04-11 08:33:08 +08:00
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
BasicBlock *Header = L->getHeader();
const PPCSubtarget *ST =
TM ? TM->getSubtargetImpl(*Header->getParent()) : nullptr;
[STLExtras] Add distance() for ranges, pred_size(), and succ_size() This commit adds a wrapper for std::distance() which works with ranges. As it would be a common case to write `distance(predecessors(BB))`, this also introduces `pred_size()` and `succ_size()` helpers to make that easier to write. Differential Revision: https://reviews.llvm.org/D46668 llvm-svn: 332057
2018-05-11 07:01:54 +08:00
unsigned HeaderLoopPredCount = pred_size(Header);
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
// Collect buckets of comparable addresses used by loads and stores.
SmallVector<Bucket, 16> Buckets;
for (Loop::block_iterator I = L->block_begin(), IE = L->block_end();
I != IE; ++I) {
for (BasicBlock::iterator J = (*I)->begin(), JE = (*I)->end();
J != JE; ++J) {
Value *PtrValue;
Instruction *MemI;
if (LoadInst *LMemI = dyn_cast<LoadInst>(J)) {
MemI = LMemI;
PtrValue = LMemI->getPointerOperand();
} else if (StoreInst *SMemI = dyn_cast<StoreInst>(J)) {
MemI = SMemI;
PtrValue = SMemI->getPointerOperand();
} else if (IntrinsicInst *IMemI = dyn_cast<IntrinsicInst>(J)) {
if (IMemI->getIntrinsicID() == Intrinsic::prefetch) {
MemI = IMemI;
PtrValue = IMemI->getArgOperand(0);
} else continue;
} else continue;
unsigned PtrAddrSpace = PtrValue->getType()->getPointerAddressSpace();
if (PtrAddrSpace)
continue;
// There are no update forms for Altivec vector load/stores.
if (ST && ST->hasAltivec() &&
PtrValue->getType()->getPointerElementType()->isVectorTy())
continue;
if (L->isLoopInvariant(PtrValue))
continue;
[PowerPC] Fix PPCLoopPreIncPrep for depth > 1 loops This pass had the same problem as the data-prefetching pass: it was only checking for depth == 1 loops in practice. Fix that, add some debugging statements, and make sure that, when we grab an AddRec, it is for the loop we expect. llvm-svn: 234670
2015-04-11 08:33:08 +08:00
const SCEV *LSCEV = SE->getSCEVAtScope(PtrValue, L);
if (const SCEVAddRecExpr *LARSCEV = dyn_cast<SCEVAddRecExpr>(LSCEV)) {
if (LARSCEV->getLoop() != L)
continue;
[PowerPC] Don't make it as pre-inc candidate if displacement isn't 4's multiple for i64 pre-inc load/store For the below case, pre-inc prep think it's a good candidate to use pre-inc for the bucket, but 64bit integer load/store update (pre-inc) instruction on Power requires the displacement field should be DS-form (4's multiple). Since it can't satisfy the constraint, we have to do some fix ups later. As below, the original load/stores could be well-form, it makes things worse. unsigned long long result = 0; unsigned long long foo(char *p, unsigned long long n) { for (unsigned long long i = 0; i < n; i++) { unsigned long long x1 = *(unsigned long long *)(p - 50000 + i); unsigned long long x2 = *(unsigned long long *)(p - 61024 + i); unsigned long long x3 = *(unsigned long long *)(p - 62048 + i); unsigned long long x4 = *(unsigned long long *)(p - 64096 + i); result *= x1 * x2 * x3 * x4; } return result; } Patch by jedilyn(Kewen Lin). Differential Revision: https://reviews.llvm.org/D48813 --This line, and those below, will be ignored-- M lib/Target/PowerPC/PPCLoopPreIncPrep.cpp A test/CodeGen/PowerPC/preincprep-i64-check.ll llvm-svn: 336074
2018-07-02 13:46:09 +08:00
// See getPreIndexedAddressParts, the displacement for LDU/STDU has to
// be 4's multiple (DS-form). For i64 loads/stores when the displacement
// fits in a 16-bit signed field but isn't a multiple of 4, it will be
// useless and possible to break some original well-form addressing mode
// to make this pre-inc prep for it.
if (PtrValue->getType()->getPointerElementType()->isIntegerTy(64)) {
if (const SCEVConstant *StepConst =
dyn_cast<SCEVConstant>(LARSCEV->getStepRecurrence(*SE))) {
const APInt &ConstInt = StepConst->getValue()->getValue();
if (ConstInt.isSignedIntN(16) && ConstInt.srem(4) != 0)
continue;
}
}
[PowerPC] Fix PPCLoopPreIncPrep for depth > 1 loops This pass had the same problem as the data-prefetching pass: it was only checking for depth == 1 loops in practice. Fix that, add some debugging statements, and make sure that, when we grab an AddRec, it is for the loop we expect. llvm-svn: 234670
2015-04-11 08:33:08 +08:00
} else {
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
continue;
[PowerPC] Fix PPCLoopPreIncPrep for depth > 1 loops This pass had the same problem as the data-prefetching pass: it was only checking for depth == 1 loops in practice. Fix that, add some debugging statements, and make sure that, when we grab an AddRec, it is for the loop we expect. llvm-svn: 234670
2015-04-11 08:33:08 +08:00
}
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
bool FoundBucket = false;
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
for (auto &B : Buckets) {
const SCEV *Diff = SE->getMinusSCEV(LSCEV, B.BaseSCEV);
if (const auto *CDiff = dyn_cast<SCEVConstant>(Diff)) {
B.Elements.push_back(BucketElement(CDiff, MemI));
FoundBucket = true;
break;
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
}
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
}
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
if (!FoundBucket) {
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
if (Buckets.size() == MaxVars)
return MadeChange;
Buckets.push_back(Bucket(LSCEV, MemI));
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
}
}
}
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
if (Buckets.empty())
[PowerPC] Handle loop predecessor invokes If a loop predecessor has an invoke as its terminator, and the return value from that invoke is used to determine the loop iteration space, then we can't insert a computation based on that value in the loop predecessor prior to the terminator (oops). If there's such an invoke, or just no predecessor for that matter, insert a new loop preheader. llvm-svn: 228488
2015-02-07 15:32:58 +08:00
return MadeChange;
BasicBlock *LoopPredecessor = L->getLoopPredecessor();
// If there is no loop predecessor, or the loop predecessor's terminator
// returns a value (which might contribute to determining the loop's
// iteration space), insert a new preheader for the loop.
if (!LoopPredecessor ||
[PowerPC] Fix PPCLoopPreIncPrep for depth > 1 loops This pass had the same problem as the data-prefetching pass: it was only checking for depth == 1 loops in practice. Fix that, add some debugging statements, and make sure that, when we grab an AddRec, it is for the loop we expect. llvm-svn: 234670
2015-04-11 08:33:08 +08:00
!LoopPredecessor->getTerminator()->getType()->isVoidTy()) {
[MemorySSA] Teach LoopSimplify to preserve MemorySSA. Summary: Preserve MemorySSA in LoopSimplify, in the old pass manager, if the analysis is available. Do not preserve it in the new pass manager. Update tests. Subscribers: nemanjai, jlebar, javed.absar, Prazek, kbarton, zzheng, jsji, llvm-commits, george.burgess.iv, chandlerc Tags: #llvm Differential Revision: https://reviews.llvm.org/D60833 llvm-svn: 360270
2019-05-09 01:05:36 +08:00
LoopPredecessor = InsertPreheaderForLoop(L, DT, LI, nullptr, PreserveLCSSA);
[PowerPC] Fix PPCLoopPreIncPrep for depth > 1 loops This pass had the same problem as the data-prefetching pass: it was only checking for depth == 1 loops in practice. Fix that, add some debugging statements, and make sure that, when we grab an AddRec, it is for the loop we expect. llvm-svn: 234670
2015-04-11 08:33:08 +08:00
if (LoopPredecessor)
MadeChange = true;
}
[PowerPC] Handle loop predecessor invokes If a loop predecessor has an invoke as its terminator, and the return value from that invoke is used to determine the loop iteration space, then we can't insert a computation based on that value in the loop predecessor prior to the terminator (oops). If there's such an invoke, or just no predecessor for that matter, insert a new loop preheader. llvm-svn: 228488
2015-02-07 15:32:58 +08:00
if (!LoopPredecessor)
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
return MadeChange;
Rename DEBUG macro to LLVM_DEBUG. The DEBUG() macro is very generic so it might clash with other projects. The renaming was done as follows: - git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g' - git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM - Manual change to APInt - Manually chage DOCS as regex doesn't match it. In the transition period the DEBUG() macro is still present and aliased to the LLVM_DEBUG() one. Differential Revision: https://reviews.llvm.org/D43624 llvm-svn: 332240
2018-05-14 20:53:11 +08:00
LLVM_DEBUG(dbgs() << "PIP: Found " << Buckets.size() << " buckets\n");
[PowerPC] Fix PPCLoopPreIncPrep for depth > 1 loops This pass had the same problem as the data-prefetching pass: it was only checking for depth == 1 loops in practice. Fix that, add some debugging statements, and make sure that, when we grab an AddRec, it is for the loop we expect. llvm-svn: 234670
2015-04-11 08:33:08 +08:00
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
SmallSet<BasicBlock *, 16> BBChanged;
for (unsigned i = 0, e = Buckets.size(); i != e; ++i) {
// The base address of each bucket is transformed into a phi and the others
// are rewritten as offsets of that variable.
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
// We have a choice now of which instruction's memory operand we use as the
// base for the generated PHI. Always picking the first instruction in each
// bucket does not work well, specifically because that instruction might
// be a prefetch (and there are no pre-increment dcbt variants). Otherwise,
// the choice is somewhat arbitrary, because the backend will happily
// generate direct offsets from both the pre-incremented and
// post-incremented pointer values. Thus, we'll pick the first non-prefetch
// instruction in each bucket, and adjust the recurrence and other offsets
Remove trailing space sed -Ei 's/[[:space:]]+$//' include/**/*.{def,h,td} lib/**/*.{cpp,h} llvm-svn: 338293
2018-07-31 03:41:25 +08:00
// accordingly.
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
for (int j = 0, je = Buckets[i].Elements.size(); j != je; ++j) {
if (auto *II = dyn_cast<IntrinsicInst>(Buckets[i].Elements[j].Instr))
if (II->getIntrinsicID() == Intrinsic::prefetch)
continue;
// If we'd otherwise pick the first element anyway, there's nothing to do.
if (j == 0)
break;
// If our chosen element has no offset from the base pointer, there's
// nothing to do.
if (!Buckets[i].Elements[j].Offset ||
Buckets[i].Elements[j].Offset->isZero())
break;
const SCEV *Offset = Buckets[i].Elements[j].Offset;
Buckets[i].BaseSCEV = SE->getAddExpr(Buckets[i].BaseSCEV, Offset);
for (auto &E : Buckets[i].Elements) {
if (E.Offset)
E.Offset = cast<SCEVConstant>(SE->getMinusSCEV(E.Offset, Offset));
else
E.Offset = cast<SCEVConstant>(SE->getNegativeSCEV(Offset));
}
std::swap(Buckets[i].Elements[j], Buckets[i].Elements[0]);
break;
}
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
const SCEVAddRecExpr *BasePtrSCEV =
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
cast<SCEVAddRecExpr>(Buckets[i].BaseSCEV);
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
if (!BasePtrSCEV->isAffine())
continue;
Rename DEBUG macro to LLVM_DEBUG. The DEBUG() macro is very generic so it might clash with other projects. The renaming was done as follows: - git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g' - git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM - Manual change to APInt - Manually chage DOCS as regex doesn't match it. In the transition period the DEBUG() macro is still present and aliased to the LLVM_DEBUG() one. Differential Revision: https://reviews.llvm.org/D43624 llvm-svn: 332240
2018-05-14 20:53:11 +08:00
LLVM_DEBUG(dbgs() << "PIP: Transforming: " << *BasePtrSCEV << "\n");
[PowerPC] Fix PPCLoopPreIncPrep for depth > 1 loops This pass had the same problem as the data-prefetching pass: it was only checking for depth == 1 loops in practice. Fix that, add some debugging statements, and make sure that, when we grab an AddRec, it is for the loop we expect. llvm-svn: 234670
2015-04-11 08:33:08 +08:00
assert(BasePtrSCEV->getLoop() == L &&
"AddRec for the wrong loop?");
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
// The instruction corresponding to the Bucket's BaseSCEV must be the first
// in the vector of elements.
Instruction *MemI = Buckets[i].Elements.begin()->Instr;
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
Value *BasePtr = GetPointerOperand(MemI);
assert(BasePtr && "No pointer operand");
[opaque pointer type] gep API migration llvm-svn: 232279
2015-03-15 05:20:51 +08:00
Type *I8Ty = Type::getInt8Ty(MemI->getParent()->getContext());
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
Type *I8PtrTy = Type::getInt8PtrTy(MemI->getParent()->getContext(),
BasePtr->getType()->getPointerAddressSpace());
const SCEV *BasePtrStartSCEV = BasePtrSCEV->getStart();
if (!SE->isLoopInvariant(BasePtrStartSCEV, L))
continue;
const SCEVConstant *BasePtrIncSCEV =
dyn_cast<SCEVConstant>(BasePtrSCEV->getStepRecurrence(*SE));
if (!BasePtrIncSCEV)
continue;
BasePtrStartSCEV = SE->getMinusSCEV(BasePtrStartSCEV, BasePtrIncSCEV);
if (!isSafeToExpand(BasePtrStartSCEV, *SE))
continue;
Rename DEBUG macro to LLVM_DEBUG. The DEBUG() macro is very generic so it might clash with other projects. The renaming was done as follows: - git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g' - git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM - Manual change to APInt - Manually chage DOCS as regex doesn't match it. In the transition period the DEBUG() macro is still present and aliased to the LLVM_DEBUG() one. Differential Revision: https://reviews.llvm.org/D43624 llvm-svn: 332240
2018-05-14 20:53:11 +08:00
LLVM_DEBUG(dbgs() << "PIP: New start is: " << *BasePtrStartSCEV << "\n");
[PowerPC] Fix PPCLoopPreIncPrep for depth > 1 loops This pass had the same problem as the data-prefetching pass: it was only checking for depth == 1 loops in practice. Fix that, add some debugging statements, and make sure that, when we grab an AddRec, it is for the loop we expect. llvm-svn: 234670
2015-04-11 08:33:08 +08:00
[PowerPC] Check if the pre-increment PHI Node already exists Preparations to use the per-increment are sometimes done in the target independent pass Loop Strength Reduction. We try to detect them in the PowerPC specific pass so that they are not done twice and so that we do not add PHIs that are not required. Differential Revision: https://reviews.llvm.org/D36736 llvm-svn: 311332
2017-08-21 21:36:18 +08:00
if (alreadyPrepared(L, MemI, BasePtrStartSCEV, BasePtrIncSCEV))
continue;
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
PHINode *NewPHI = PHINode::Create(I8PtrTy, HeaderLoopPredCount,
MemI->hasName() ? MemI->getName() + ".phi" : "",
Header->getFirstNonPHI());
DataLayout is mandatory, update the API to reflect it with references. Summary: Now that the DataLayout is a mandatory part of the module, let's start cleaning the codebase. This patch is a first attempt at doing that. This patch is not exactly NFC as for instance some places were passing a nullptr instead of the DataLayout, possibly just because there was a default value on the DataLayout argument to many functions in the API. Even though it is not purely NFC, there is no change in the validation. I turned as many pointer to DataLayout to references, this helped figuring out all the places where a nullptr could come up. I had initially a local version of this patch broken into over 30 independant, commits but some later commit were cleaning the API and touching part of the code modified in the previous commits, so it seemed cleaner without the intermediate state. Test Plan: Reviewers: echristo Subscribers: llvm-commits From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 231740
2015-03-10 10:37:25 +08:00
SCEVExpander SCEVE(*SE, Header->getModule()->getDataLayout(), "pistart");
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
Value *BasePtrStart = SCEVE.expandCodeFor(BasePtrStartSCEV, I8PtrTy,
LoopPredecessor->getTerminator());
// Note that LoopPredecessor might occur in the predecessor list multiple
// times, and we need to add it the right number of times.
for (pred_iterator PI = pred_begin(Header), PE = pred_end(Header);
PI != PE; ++PI) {
if (*PI != LoopPredecessor)
continue;
NewPHI->addIncoming(BasePtrStart, LoopPredecessor);
}
PowerPC: Remove implicit ilist iterator conversions, NFC llvm-svn: 250787
2015-10-20 09:07:37 +08:00
Instruction *InsPoint = &*Header->getFirstInsertionPt();
[opaque pointer type] gep API migration llvm-svn: 232279
2015-03-15 05:20:51 +08:00
GetElementPtrInst *PtrInc = GetElementPtrInst::Create(
I8Ty, NewPHI, BasePtrIncSCEV->getValue(),
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
MemI->hasName() ? MemI->getName() + ".inc" : "", InsPoint);
PtrInc->setIsInBounds(IsPtrInBounds(BasePtr));
for (pred_iterator PI = pred_begin(Header), PE = pred_end(Header);
PI != PE; ++PI) {
if (*PI == LoopPredecessor)
continue;
NewPHI->addIncoming(PtrInc, *PI);
}
Instruction *NewBasePtr;
if (PtrInc->getType() != BasePtr->getType())
NewBasePtr = new BitCastInst(PtrInc, BasePtr->getType(),
PtrInc->hasName() ? PtrInc->getName() + ".cast" : "", InsPoint);
else
NewBasePtr = PtrInc;
if (Instruction *IDel = dyn_cast<Instruction>(BasePtr))
BBChanged.insert(IDel->getParent());
BasePtr->replaceAllUsesWith(NewBasePtr);
RecursivelyDeleteTriviallyDeadInstructions(BasePtr);
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
// Keep track of the replacement pointer values we've inserted so that we
// don't generate more pointer values than necessary.
SmallPtrSet<Value *, 16> NewPtrs;
NewPtrs.insert( NewBasePtr);
for (auto I = std::next(Buckets[i].Elements.begin()),
IE = Buckets[i].Elements.end(); I != IE; ++I) {
Value *Ptr = GetPointerOperand(I->Instr);
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
assert(Ptr && "No pointer operand");
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
if (NewPtrs.count(Ptr))
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
continue;
Instruction *RealNewPtr;
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
if (!I->Offset || I->Offset->getValue()->isZero()) {
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
RealNewPtr = NewBasePtr;
} else {
Instruction *PtrIP = dyn_cast<Instruction>(Ptr);
if (PtrIP && isa<Instruction>(NewBasePtr) &&
cast<Instruction>(NewBasePtr)->getParent() == PtrIP->getParent())
[AMDGPU, PowerPC, TableGen] Fix some Clang-tidy modernize and Include What You Use warnings; other minor fixes (NFC). llvm-svn: 289282
2016-12-10 06:06:55 +08:00
PtrIP = nullptr;
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
else if (isa<PHINode>(PtrIP))
PowerPC: Remove implicit ilist iterator conversions, NFC llvm-svn: 250787
2015-10-20 09:07:37 +08:00
PtrIP = &*PtrIP->getParent()->getFirstInsertionPt();
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
else if (!PtrIP)
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
PtrIP = I->Instr;
[opaque pointer type] gep API migration llvm-svn: 232279
2015-03-15 05:20:51 +08:00
GetElementPtrInst *NewPtr = GetElementPtrInst::Create(
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
I8Ty, PtrInc, I->Offset->getValue(),
I->Instr->hasName() ? I->Instr->getName() + ".off" : "", PtrIP);
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
if (!PtrIP)
NewPtr->insertAfter(cast<Instruction>(PtrInc));
NewPtr->setIsInBounds(IsPtrInBounds(Ptr));
RealNewPtr = NewPtr;
}
if (Instruction *IDel = dyn_cast<Instruction>(Ptr))
BBChanged.insert(IDel->getParent());
Instruction *ReplNewPtr;
if (Ptr->getType() != RealNewPtr->getType()) {
ReplNewPtr = new BitCastInst(RealNewPtr, Ptr->getType(),
Ptr->hasName() ? Ptr->getName() + ".cast" : "");
ReplNewPtr->insertAfter(RealNewPtr);
} else
ReplNewPtr = RealNewPtr;
Ptr->replaceAllUsesWith(ReplNewPtr);
RecursivelyDeleteTriviallyDeadInstructions(Ptr);
[PowerPC] Fix LoopPreIncPrep not to depend on SCEV constant simplifications Under most circumstances, if SCEV can simplify X-Y to a constant, then it can also simplify Y-X to a constant. However, there is no guarantee that this is always true, and concensus is not to consider that a correctness bug in SCEV (although it is undesirable). PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and prefetches) into buckets, where in each bucket the relative pointer offsets are constant. We used to keep each bucket as a multimap, where SCEV's subtraction operation was used to define the ordering predicate. Instead, use a fixed SCEV base expression for each bucket, record the constant offsets from that base expression, and adjust it later, if desirable, once all pointers have been collected. Doing it this way should be more compile-time efficient than the previous scheme (in addition to making the implementation less sensitive to SCEV simplification quirks). Fixes PR25170. llvm-svn: 252417
2015-11-08 16:04:40 +08:00
NewPtrs.insert(RealNewPtr);
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
}
MadeChange = true;
}
for (Loop::block_iterator I = L->block_begin(), IE = L->block_end();
I != IE; ++I) {
if (BBChanged.count(*I))
DeleteDeadPHIs(*I);
}
return MadeChange;
}