maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/ARM/interrupt-attr.ll

135 lines
4.1 KiB
LLVM
Raw Normal View History

ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; RUN: llc -mtriple=arm-none-none-eabi -mcpu=cortex-a15 -o - %s | FileCheck --check-prefix=CHECK-A %s
; RUN: llc -mtriple=thumb-none-none-eabi -mcpu=cortex-a15 -o - %s | FileCheck --check-prefix=CHECK-A-THUMB %s
ARM MachO: sort out isTargetDarwin/isTargetIOS/... checks. The ARM backend has been using most of the MachO related subtarget checks almost interchangeably, and since the only target it's had to run on has been IOS (which is all three of MachO, Darwin and IOS) it's worked out OK so far. But we'd like to support embedded targets under the "*-*-none-macho" triple, which means everything starts falling apart and inconsistent behaviours emerge. This patch should pick a reasonably sensible set of behaviours for the new triple (and any others that come along, with luck). Some choices were debatable (notably FP == r7 or r11), but we can revisit those later when deficiencies become apparent. llvm-svn: 198617
2014-01-06 22:28:05 +08:00
; RUN: llc -mtriple=thumb-apple-none-macho -mcpu=cortex-m3 -o - %s | FileCheck --check-prefix=CHECK-M %s
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
declare arm_aapcscc void @bar()
@bigvar = global [16 x i32] zeroinitializer
define arm_aapcscc void @irq_fn() alignstack(8) "interrupt"="IRQ" {
; Must save all registers except banked sp and lr (we save lr anyway because
; we actually need it at the end to execute the return ourselves).
; Also need special function return setting pc and CPSR simultaneously.
; CHECK-A-LABEL: irq_fn:
If a function needs a frame pointer, but r11 (aka fp) has not been used, remove it from the list of unspilled registers. Otherwise the following attempt to keep the stack aligned by picking an extra GPR register to spill will not work as it picks up r11. llvm-svn: 208129
2014-05-07 04:43:01 +08:00
; CHECK-A: push {r0, r1, r2, r3, r10, r11, r12, lr}
; CHECK-A: add r11, sp, #20
; CHECK-A-NOT: sub sp, sp, #{{[0-9]+}}
Fix large stack alignment codegen for ARM and Thumb2 targets This partially fixes PR13007 (ARM CodeGen fails with large stack alignment): for ARM and Thumb2 targets, but not for Thumb1, as it seems stack alignment for Thumb1 targets hasn't been supported at all. Producing an aligned stack pointer is done by zero-ing out the lower bits of the stack pointer. The BIC instruction was used for this. However, the immediate field of the BIC instruction only allows to encode an immediate that can zero out up to a maximum of the 8 lower bits. When a larger alignment is requested, a BIC instruction cannot be used; llvm was silently producing incorrect code in this case. This commit fixes code generation for large stack aligments by using the BFC instruction instead, when the BFC instruction is available. When not, it uses 2 instructions: a right shift, followed by a left shift to zero out the lower bits. The lowering of ARM::Int_eh_sjlj_dispatchsetup still has code that unconditionally uses BIC to realign the stack pointer, so it very likely has the same problem. However, I wasn't able to produce a test case for that. This commit adds an assert so that the compiler will fail the assert instead of silently generating wrong code if this is ever reached. llvm-svn: 225446
2015-01-08 23:09:14 +08:00
; CHECK-A: bfc sp, #0, #3
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; CHECK-A: bl bar
If a function needs a frame pointer, but r11 (aka fp) has not been used, remove it from the list of unspilled registers. Otherwise the following attempt to keep the stack aligned by picking an extra GPR register to spill will not work as it picks up r11. llvm-svn: 208129
2014-05-07 04:43:01 +08:00
; CHECK-A: sub sp, r11, #20
; CHECK-A: pop {r0, r1, r2, r3, r10, r11, r12, lr}
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; CHECK-A: subs pc, lr, #4
; CHECK-A-THUMB-LABEL: irq_fn:
ARM: r12 is callee-saved for interrupt handlers For A- and R-class processors, r12 is not normally callee-saved, but is for interrupt handlers. See AAPCS, 5.3.1.1, "Use of IP by the linker". llvm-svn: 201089
2014-02-10 22:24:23 +08:00
; CHECK-A-THUMB: push.w {r0, r1, r2, r3, r4, r7, r12, lr}
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; CHECK-A-THUMB: add r7, sp, #20
Generate the DWARF stack frame decode operations in the function prologue for ARM/Thumb functions. Patch by Keith Walker! llvm-svn: 201423
2014-02-15 01:19:07 +08:00
; CHECK-A-THUMB: mov r4, sp
Fix large stack alignment codegen for ARM and Thumb2 targets This partially fixes PR13007 (ARM CodeGen fails with large stack alignment): for ARM and Thumb2 targets, but not for Thumb1, as it seems stack alignment for Thumb1 targets hasn't been supported at all. Producing an aligned stack pointer is done by zero-ing out the lower bits of the stack pointer. The BIC instruction was used for this. However, the immediate field of the BIC instruction only allows to encode an immediate that can zero out up to a maximum of the 8 lower bits. When a larger alignment is requested, a BIC instruction cannot be used; llvm was silently producing incorrect code in this case. This commit fixes code generation for large stack aligments by using the BFC instruction instead, when the BFC instruction is available. When not, it uses 2 instructions: a right shift, followed by a left shift to zero out the lower bits. The lowering of ARM::Int_eh_sjlj_dispatchsetup still has code that unconditionally uses BIC to realign the stack pointer, so it very likely has the same problem. However, I wasn't able to produce a test case for that. This commit adds an assert so that the compiler will fail the assert instead of silently generating wrong code if this is ever reached. llvm-svn: 225446
2015-01-08 23:09:14 +08:00
; CHECK-A-THUMB: bfc r4, #0, #3
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; CHECK-A-THUMB: bl bar
; CHECK-A-THUMB: sub.w r4, r7, #20
; CHECK-A-THUMB: mov sp, r4
ARM: r12 is callee-saved for interrupt handlers For A- and R-class processors, r12 is not normally callee-saved, but is for interrupt handlers. See AAPCS, 5.3.1.1, "Use of IP by the linker". llvm-svn: 201089
2014-02-10 22:24:23 +08:00
; CHECK-A-THUMB: pop.w {r0, r1, r2, r3, r4, r7, r12, lr}
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; CHECK-A-THUMB: subs pc, lr, #4
; Normal AAPCS function (r0-r3 pushed onto stack by hardware, lr set to
; appropriate sentinel so no special return needed).
ARM MachO: sort out isTargetDarwin/isTargetIOS/... checks. The ARM backend has been using most of the MachO related subtarget checks almost interchangeably, and since the only target it's had to run on has been IOS (which is all three of MachO, Darwin and IOS) it's worked out OK so far. But we'd like to support embedded targets under the "*-*-none-macho" triple, which means everything starts falling apart and inconsistent behaviours emerge. This patch should pick a reasonably sensible set of behaviours for the new triple (and any others that come along, with luck). Some choices were debatable (notably FP == r7 or r11), but we can revisit those later when deficiencies become apparent. llvm-svn: 198617
2014-01-06 22:28:05 +08:00
; CHECK-M-LABEL: irq_fn:
ARM: When spilling extra registers for alignment, prefer low registers on all Thumb targets. This makes it more likely that we can use the 16-bit push and pop instructions on Thumb-2, saving around 4 bytes per function. Differential Revision: http://reviews.llvm.org/D9165 llvm-svn: 235637
2015-04-24 04:31:26 +08:00
; CHECK-M: push.w {r4, r7, r11, lr}
ARM: use AAPCS-style prologues for embedded MachO. Darwin prologues save their GPRs in two stages: a narrow push of r0-r7 & lr, followed by a wide push of the remaining registers if there are any. AAPCS uses a single push.w instruction. It turns out that, on average, enough registers get pushed that code is smaller in the AAPCS prologue, which is a nice property for M-class programmers. They also have other options available for back-traces, so can hopefully deal with the fact that FP & LR aren't adjacent in memory. rdar://problem/15909583 llvm-svn: 209895
2014-05-30 21:23:06 +08:00
; CHECK-M: add.w r11, sp, #8
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; CHECK-M: mov r4, sp
Fix large stack alignment codegen for ARM and Thumb2 targets This partially fixes PR13007 (ARM CodeGen fails with large stack alignment): for ARM and Thumb2 targets, but not for Thumb1, as it seems stack alignment for Thumb1 targets hasn't been supported at all. Producing an aligned stack pointer is done by zero-ing out the lower bits of the stack pointer. The BIC instruction was used for this. However, the immediate field of the BIC instruction only allows to encode an immediate that can zero out up to a maximum of the 8 lower bits. When a larger alignment is requested, a BIC instruction cannot be used; llvm was silently producing incorrect code in this case. This commit fixes code generation for large stack aligments by using the BFC instruction instead, when the BFC instruction is available. When not, it uses 2 instructions: a right shift, followed by a left shift to zero out the lower bits. The lowering of ARM::Int_eh_sjlj_dispatchsetup still has code that unconditionally uses BIC to realign the stack pointer, so it very likely has the same problem. However, I wasn't able to produce a test case for that. This commit adds an assert so that the compiler will fail the assert instead of silently generating wrong code if this is ever reached. llvm-svn: 225446
2015-01-08 23:09:14 +08:00
; CHECK-M: bfc r4, #0, #3
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; CHECK-M: mov sp, r4
ARM: do not generate BLX instructions on Cortex-M CPUs. Particularly on MachO, we were generating "blx _dest" instructions on M-class CPUs, which don't actually exist. They happen to get fixed up by the linker into valid "bl _dest" instructions (which is why such a massive issue has remained largely undetected), but we shouldn't rely on that. llvm-svn: 214959
2014-08-06 19:13:14 +08:00
; CHECK-M: bl _bar
ARM: use AAPCS-style prologues for embedded MachO. Darwin prologues save their GPRs in two stages: a narrow push of r0-r7 & lr, followed by a wide push of the remaining registers if there are any. AAPCS uses a single push.w instruction. It turns out that, on average, enough registers get pushed that code is smaller in the AAPCS prologue, which is a nice property for M-class programmers. They also have other options available for back-traces, so can hopefully deal with the fact that FP & LR aren't adjacent in memory. rdar://problem/15909583 llvm-svn: 209895
2014-05-30 21:23:06 +08:00
; CHECK-M: sub.w r4, r11, #8
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; CHECK-M: mov sp, r4
ARM: When spilling extra registers for alignment, prefer low registers on all Thumb targets. This makes it more likely that we can use the 16-bit push and pop instructions on Thumb-2, saving around 4 bytes per function. Differential Revision: http://reviews.llvm.org/D9165 llvm-svn: 235637
2015-04-24 04:31:26 +08:00
; CHECK-M: pop.w {r4, r7, r11, pc}
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
call arm_aapcscc void @bar()
ret void
}
ARM: r12 is callee-saved for interrupt handlers For A- and R-class processors, r12 is not normally callee-saved, but is for interrupt handlers. See AAPCS, 5.3.1.1, "Use of IP by the linker". llvm-svn: 201089
2014-02-10 22:24:23 +08:00
; We don't push/pop r12, as it is banked for FIQ
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
define arm_aapcscc void @fiq_fn() alignstack(8) "interrupt"="FIQ" {
; CHECK-A-LABEL: fiq_fn:
; CHECK-A: push {r0, r1, r2, r3, r4, r5, r6, r7, r11, lr}
; 32 to get past r0, r1, ..., r7
; CHECK-A: add r11, sp, #32
; CHECK-A: sub sp, sp, #{{[0-9]+}}
Fix large stack alignment codegen for ARM and Thumb2 targets This partially fixes PR13007 (ARM CodeGen fails with large stack alignment): for ARM and Thumb2 targets, but not for Thumb1, as it seems stack alignment for Thumb1 targets hasn't been supported at all. Producing an aligned stack pointer is done by zero-ing out the lower bits of the stack pointer. The BIC instruction was used for this. However, the immediate field of the BIC instruction only allows to encode an immediate that can zero out up to a maximum of the 8 lower bits. When a larger alignment is requested, a BIC instruction cannot be used; llvm was silently producing incorrect code in this case. This commit fixes code generation for large stack aligments by using the BFC instruction instead, when the BFC instruction is available. When not, it uses 2 instructions: a right shift, followed by a left shift to zero out the lower bits. The lowering of ARM::Int_eh_sjlj_dispatchsetup still has code that unconditionally uses BIC to realign the stack pointer, so it very likely has the same problem. However, I wasn't able to produce a test case for that. This commit adds an assert so that the compiler will fail the assert instead of silently generating wrong code if this is ever reached. llvm-svn: 225446
2015-01-08 23:09:14 +08:00
; CHECK-A: bfc sp, #0, #3
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; [...]
; 32 must match above
; CHECK-A: sub sp, r11, #32
; CHECK-A: pop {r0, r1, r2, r3, r4, r5, r6, r7, r11, lr}
; CHECK-A: subs pc, lr, #4
ARM MachO: sort out isTargetDarwin/isTargetIOS/... checks. The ARM backend has been using most of the MachO related subtarget checks almost interchangeably, and since the only target it's had to run on has been IOS (which is all three of MachO, Darwin and IOS) it's worked out OK so far. But we'd like to support embedded targets under the "*-*-none-macho" triple, which means everything starts falling apart and inconsistent behaviours emerge. This patch should pick a reasonably sensible set of behaviours for the new triple (and any others that come along, with luck). Some choices were debatable (notably FP == r7 or r11), but we can revisit those later when deficiencies become apparent. llvm-svn: 198617
2014-01-06 22:28:05 +08:00
; CHECK-A-THUMB-LABEL: fiq_fn:
; CHECK-M-LABEL: fiq_fn:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%val = load volatile [16 x i32], [16 x i32]* @bigvar
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
store volatile [16 x i32] %val, [16 x i32]* @bigvar
ret void
}
define arm_aapcscc void @swi_fn() alignstack(8) "interrupt"="SWI" {
; CHECK-A-LABEL: swi_fn:
ARM: r12 is callee-saved for interrupt handlers For A- and R-class processors, r12 is not normally callee-saved, but is for interrupt handlers. See AAPCS, 5.3.1.1, "Use of IP by the linker". llvm-svn: 201089
2014-02-10 22:24:23 +08:00
; CHECK-A: push {r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11, r12, lr}
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; CHECK-A: add r11, sp, #44
; CHECK-A: sub sp, sp, #{{[0-9]+}}
Fix large stack alignment codegen for ARM and Thumb2 targets This partially fixes PR13007 (ARM CodeGen fails with large stack alignment): for ARM and Thumb2 targets, but not for Thumb1, as it seems stack alignment for Thumb1 targets hasn't been supported at all. Producing an aligned stack pointer is done by zero-ing out the lower bits of the stack pointer. The BIC instruction was used for this. However, the immediate field of the BIC instruction only allows to encode an immediate that can zero out up to a maximum of the 8 lower bits. When a larger alignment is requested, a BIC instruction cannot be used; llvm was silently producing incorrect code in this case. This commit fixes code generation for large stack aligments by using the BFC instruction instead, when the BFC instruction is available. When not, it uses 2 instructions: a right shift, followed by a left shift to zero out the lower bits. The lowering of ARM::Int_eh_sjlj_dispatchsetup still has code that unconditionally uses BIC to realign the stack pointer, so it very likely has the same problem. However, I wasn't able to produce a test case for that. This commit adds an assert so that the compiler will fail the assert instead of silently generating wrong code if this is ever reached. llvm-svn: 225446
2015-01-08 23:09:14 +08:00
; CHECK-A: bfc sp, #0, #3
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; [...]
; CHECK-A: sub sp, r11, #44
ARM: r12 is callee-saved for interrupt handlers For A- and R-class processors, r12 is not normally callee-saved, but is for interrupt handlers. See AAPCS, 5.3.1.1, "Use of IP by the linker". llvm-svn: 201089
2014-02-10 22:24:23 +08:00
; CHECK-A: pop {r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11, r12, lr}
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; CHECK-A: subs pc, lr, #0
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%val = load volatile [16 x i32], [16 x i32]* @bigvar
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
store volatile [16 x i32] %val, [16 x i32]* @bigvar
ret void
}
define arm_aapcscc void @undef_fn() alignstack(8) "interrupt"="UNDEF" {
; CHECK-A-LABEL: undef_fn:
If a function needs a frame pointer, but r11 (aka fp) has not been used, remove it from the list of unspilled registers. Otherwise the following attempt to keep the stack aligned by picking an extra GPR register to spill will not work as it picks up r11. llvm-svn: 208129
2014-05-07 04:43:01 +08:00
; CHECK-A: push {r0, r1, r2, r3, r10, r11, r12, lr}
; CHECK-A: add r11, sp, #20
; CHECK-A-NOT: sub sp, sp, #{{[0-9]+}}
Fix large stack alignment codegen for ARM and Thumb2 targets This partially fixes PR13007 (ARM CodeGen fails with large stack alignment): for ARM and Thumb2 targets, but not for Thumb1, as it seems stack alignment for Thumb1 targets hasn't been supported at all. Producing an aligned stack pointer is done by zero-ing out the lower bits of the stack pointer. The BIC instruction was used for this. However, the immediate field of the BIC instruction only allows to encode an immediate that can zero out up to a maximum of the 8 lower bits. When a larger alignment is requested, a BIC instruction cannot be used; llvm was silently producing incorrect code in this case. This commit fixes code generation for large stack aligments by using the BFC instruction instead, when the BFC instruction is available. When not, it uses 2 instructions: a right shift, followed by a left shift to zero out the lower bits. The lowering of ARM::Int_eh_sjlj_dispatchsetup still has code that unconditionally uses BIC to realign the stack pointer, so it very likely has the same problem. However, I wasn't able to produce a test case for that. This commit adds an assert so that the compiler will fail the assert instead of silently generating wrong code if this is ever reached. llvm-svn: 225446
2015-01-08 23:09:14 +08:00
; CHECK-A: bfc sp, #0, #3
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; [...]
If a function needs a frame pointer, but r11 (aka fp) has not been used, remove it from the list of unspilled registers. Otherwise the following attempt to keep the stack aligned by picking an extra GPR register to spill will not work as it picks up r11. llvm-svn: 208129
2014-05-07 04:43:01 +08:00
; CHECK-A: sub sp, r11, #20
; CHECK-A: pop {r0, r1, r2, r3, r10, r11, r12, lr}
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; CHECK-A: subs pc, lr, #0
call void @bar()
ret void
}
define arm_aapcscc void @abort_fn() alignstack(8) "interrupt"="ABORT" {
; CHECK-A-LABEL: abort_fn:
If a function needs a frame pointer, but r11 (aka fp) has not been used, remove it from the list of unspilled registers. Otherwise the following attempt to keep the stack aligned by picking an extra GPR register to spill will not work as it picks up r11. llvm-svn: 208129
2014-05-07 04:43:01 +08:00
; CHECK-A: push {r0, r1, r2, r3, r10, r11, r12, lr}
; CHECK-A: add r11, sp, #20
; CHECK-A-NOT: sub sp, sp, #{{[0-9]+}}
Fix large stack alignment codegen for ARM and Thumb2 targets This partially fixes PR13007 (ARM CodeGen fails with large stack alignment): for ARM and Thumb2 targets, but not for Thumb1, as it seems stack alignment for Thumb1 targets hasn't been supported at all. Producing an aligned stack pointer is done by zero-ing out the lower bits of the stack pointer. The BIC instruction was used for this. However, the immediate field of the BIC instruction only allows to encode an immediate that can zero out up to a maximum of the 8 lower bits. When a larger alignment is requested, a BIC instruction cannot be used; llvm was silently producing incorrect code in this case. This commit fixes code generation for large stack aligments by using the BFC instruction instead, when the BFC instruction is available. When not, it uses 2 instructions: a right shift, followed by a left shift to zero out the lower bits. The lowering of ARM::Int_eh_sjlj_dispatchsetup still has code that unconditionally uses BIC to realign the stack pointer, so it very likely has the same problem. However, I wasn't able to produce a test case for that. This commit adds an assert so that the compiler will fail the assert instead of silently generating wrong code if this is ever reached. llvm-svn: 225446
2015-01-08 23:09:14 +08:00
; CHECK-A: bfc sp, #0, #3
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; [...]
If a function needs a frame pointer, but r11 (aka fp) has not been used, remove it from the list of unspilled registers. Otherwise the following attempt to keep the stack aligned by picking an extra GPR register to spill will not work as it picks up r11. llvm-svn: 208129
2014-05-07 04:43:01 +08:00
; CHECK-A: sub sp, r11, #20
; CHECK-A: pop {r0, r1, r2, r3, r10, r11, r12, lr}
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
; CHECK-A: subs pc, lr, #4
call void @bar()
ret void
}
@var = global double 0.0
; We don't save VFP regs, since it would be a massive overhead in the general
; case.
define arm_aapcscc void @floating_fn() alignstack(8) "interrupt"="IRQ" {
; CHECK-A-LABEL: floating_fn:
; CHECK-A-NOT: vpush
; CHECK-A-NOT: vstr
; CHECK-A-NOT: vstm
; CHECK-A: vadd.f64 {{d[0-9]+}}, {{d[0-9]+}}, {{d[0-9]+}}
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%lhs = load volatile double, double* @var
%rhs = load volatile double, double* @var
ARM: support interrupt attribute This function-attribute modifies the callee-saved register list and function epilogue (specifically the return instruction) so that a routine is suitable for use as an interrupt-handler of the specified type without disrupting user-mode applications. rdar://problem/14207019 llvm-svn: 191766
2013-10-01 22:33:28 +08:00
%sum = fadd double %lhs, %rhs
store double %sum, double* @var
ret void
}