llvm-project/llvm/test/Transforms/LoopSimplifyCFG/scev.ll

58 lines
1.6 KiB
LLVM
Raw Normal View History

; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
; RUN: opt -S -loop-simplifycfg -verify-scev < %s | FileCheck %s
; Verify that the scev information is still valid. Verification should not fail
define void @t_run_test() {
; CHECK-LABEL: @t_run_test(
; CHECK-NEXT: entry:
Generalize MergeBlockIntoPredecessor. Replace uses of MergeBasicBlockIntoOnlyPred. Summary: Two utils methods have essentially the same functionality. This is an attempt to merge them into one. 1. lib/Transforms/Utils/Local.cpp : MergeBasicBlockIntoOnlyPred 2. lib/Transforms/Utils/BasicBlockUtils.cpp : MergeBlockIntoPredecessor Prior to the patch: 1. MergeBasicBlockIntoOnlyPred Updates either DomTree or DeferredDominance Moves all instructions from Pred to BB, deletes Pred Asserts BB has single predecessor If address was taken, replace the block address with constant 1 (?) 2. MergeBlockIntoPredecessor Updates DomTree, LoopInfo and MemoryDependenceResults Moves all instruction from BB to Pred, deletes BB Returns if doesn't have a single predecessor Returns if BB's address was taken After the patch: Method 2. MergeBlockIntoPredecessor is attempting to become the new default: Updates DomTree or DeferredDominance, and LoopInfo and MemoryDependenceResults Moves all instruction from BB to Pred, deletes BB Returns if doesn't have a single predecessor Returns if BB's address was taken Uses of MergeBasicBlockIntoOnlyPred that need to be replaced: 1. lib/Transforms/Scalar/LoopSimplifyCFG.cpp Updated in this patch. No challenges. 2. lib/CodeGen/CodeGenPrepare.cpp Updated in this patch. i. eliminateFallThrough is straightforward, but I added using a temporary array to avoid the iterator invalidation. ii. eliminateMostlyEmptyBlock(s) methods also now use a temporary array for blocks Some interesting aspects: - Since Pred is not deleted (BB is), the entry block does not need updating. - The entry block was being updated with the deleted block in eliminateMostlyEmptyBlock. Added assert to make obvious that BB=SinglePred. - isMergingEmptyBlockProfitable assumes BB is the one to be deleted. - eliminateMostlyEmptyBlock(BB) does not delete BB on one path, it deletes its unique predecessor instead. - adding some test owner as subscribers for the interesting tests modified: test/CodeGen/X86/avx-cmp.ll test/CodeGen/AMDGPU/nested-loop-conditions.ll test/CodeGen/AMDGPU/si-annotate-cf.ll test/CodeGen/X86/hoist-spill.ll test/CodeGen/X86/2006-11-17-IllegalMove.ll 3. lib/Transforms/Scalar/JumpThreading.cpp Not covered in this patch. It is the only use case using the DeferredDominance. I would defer to Brian Rzycki to make this replacement. Reviewers: chandlerc, spatel, davide, brzycki, bkramer, javed.absar Subscribers: qcolombet, sanjoy, nemanjai, nhaehnle, jlebar, tpr, kbarton, RKSimon, wmi, arsenm, llvm-commits Differential Revision: https://reviews.llvm.org/D48202 llvm-svn: 335183
2018-06-21 06:01:04 +08:00
; CHECK-NEXT: br label %[[LOOP_PH:.*]]
; CHECK: [[LOOP_PH]]:
; CHECK-NEXT: br label %[[LOOP_BODY:.*]]
; CHECK: [[LOOP_BODY]]:
; CHECK-NEXT: [[IV:%.*]] = phi i32 [ 0, %[[LOOP_PH]] ], [ [[INC:%.*]], %[[LOOP_BODY]] ]
; CHECK-NEXT: [[INC]] = add i32 [[IV]], 1
; CHECK-NEXT: [[CMP:%.*]] = icmp ult i32 [[INC]], 10
Generalize MergeBlockIntoPredecessor. Replace uses of MergeBasicBlockIntoOnlyPred. Summary: Two utils methods have essentially the same functionality. This is an attempt to merge them into one. 1. lib/Transforms/Utils/Local.cpp : MergeBasicBlockIntoOnlyPred 2. lib/Transforms/Utils/BasicBlockUtils.cpp : MergeBlockIntoPredecessor Prior to the patch: 1. MergeBasicBlockIntoOnlyPred Updates either DomTree or DeferredDominance Moves all instructions from Pred to BB, deletes Pred Asserts BB has single predecessor If address was taken, replace the block address with constant 1 (?) 2. MergeBlockIntoPredecessor Updates DomTree, LoopInfo and MemoryDependenceResults Moves all instruction from BB to Pred, deletes BB Returns if doesn't have a single predecessor Returns if BB's address was taken After the patch: Method 2. MergeBlockIntoPredecessor is attempting to become the new default: Updates DomTree or DeferredDominance, and LoopInfo and MemoryDependenceResults Moves all instruction from BB to Pred, deletes BB Returns if doesn't have a single predecessor Returns if BB's address was taken Uses of MergeBasicBlockIntoOnlyPred that need to be replaced: 1. lib/Transforms/Scalar/LoopSimplifyCFG.cpp Updated in this patch. No challenges. 2. lib/CodeGen/CodeGenPrepare.cpp Updated in this patch. i. eliminateFallThrough is straightforward, but I added using a temporary array to avoid the iterator invalidation. ii. eliminateMostlyEmptyBlock(s) methods also now use a temporary array for blocks Some interesting aspects: - Since Pred is not deleted (BB is), the entry block does not need updating. - The entry block was being updated with the deleted block in eliminateMostlyEmptyBlock. Added assert to make obvious that BB=SinglePred. - isMergingEmptyBlockProfitable assumes BB is the one to be deleted. - eliminateMostlyEmptyBlock(BB) does not delete BB on one path, it deletes its unique predecessor instead. - adding some test owner as subscribers for the interesting tests modified: test/CodeGen/X86/avx-cmp.ll test/CodeGen/AMDGPU/nested-loop-conditions.ll test/CodeGen/AMDGPU/si-annotate-cf.ll test/CodeGen/X86/hoist-spill.ll test/CodeGen/X86/2006-11-17-IllegalMove.ll 3. lib/Transforms/Scalar/JumpThreading.cpp Not covered in this patch. It is the only use case using the DeferredDominance. I would defer to Brian Rzycki to make this replacement. Reviewers: chandlerc, spatel, davide, brzycki, bkramer, javed.absar Subscribers: qcolombet, sanjoy, nemanjai, nhaehnle, jlebar, tpr, kbarton, RKSimon, wmi, arsenm, llvm-commits Differential Revision: https://reviews.llvm.org/D48202 llvm-svn: 335183
2018-06-21 06:01:04 +08:00
; CHECK-NEXT: br i1 [[CMP]], label %[[LOOP_BODY]], label %[[EXIT:.*]]
; CHECK: [[EXIT]]:
; CHECK-NEXT: br label %[[LOOP_BODY2:.*]]
; CHECK: [[LOOP_BODY2]]:
; CHECK-NEXT: [[IV2:%.*]] = phi i32 [ 0, %[[EXIT]] ], [ [[INC2:%.*]], %[[LOOP_BODY2]] ]
; CHECK-NEXT: [[INC2]] = add i32 [[IV2]], 1
; CHECK-NEXT: [[CMP2:%.*]] = icmp ult i32 [[INC2]], 10
Generalize MergeBlockIntoPredecessor. Replace uses of MergeBasicBlockIntoOnlyPred. Summary: Two utils methods have essentially the same functionality. This is an attempt to merge them into one. 1. lib/Transforms/Utils/Local.cpp : MergeBasicBlockIntoOnlyPred 2. lib/Transforms/Utils/BasicBlockUtils.cpp : MergeBlockIntoPredecessor Prior to the patch: 1. MergeBasicBlockIntoOnlyPred Updates either DomTree or DeferredDominance Moves all instructions from Pred to BB, deletes Pred Asserts BB has single predecessor If address was taken, replace the block address with constant 1 (?) 2. MergeBlockIntoPredecessor Updates DomTree, LoopInfo and MemoryDependenceResults Moves all instruction from BB to Pred, deletes BB Returns if doesn't have a single predecessor Returns if BB's address was taken After the patch: Method 2. MergeBlockIntoPredecessor is attempting to become the new default: Updates DomTree or DeferredDominance, and LoopInfo and MemoryDependenceResults Moves all instruction from BB to Pred, deletes BB Returns if doesn't have a single predecessor Returns if BB's address was taken Uses of MergeBasicBlockIntoOnlyPred that need to be replaced: 1. lib/Transforms/Scalar/LoopSimplifyCFG.cpp Updated in this patch. No challenges. 2. lib/CodeGen/CodeGenPrepare.cpp Updated in this patch. i. eliminateFallThrough is straightforward, but I added using a temporary array to avoid the iterator invalidation. ii. eliminateMostlyEmptyBlock(s) methods also now use a temporary array for blocks Some interesting aspects: - Since Pred is not deleted (BB is), the entry block does not need updating. - The entry block was being updated with the deleted block in eliminateMostlyEmptyBlock. Added assert to make obvious that BB=SinglePred. - isMergingEmptyBlockProfitable assumes BB is the one to be deleted. - eliminateMostlyEmptyBlock(BB) does not delete BB on one path, it deletes its unique predecessor instead. - adding some test owner as subscribers for the interesting tests modified: test/CodeGen/X86/avx-cmp.ll test/CodeGen/AMDGPU/nested-loop-conditions.ll test/CodeGen/AMDGPU/si-annotate-cf.ll test/CodeGen/X86/hoist-spill.ll test/CodeGen/X86/2006-11-17-IllegalMove.ll 3. lib/Transforms/Scalar/JumpThreading.cpp Not covered in this patch. It is the only use case using the DeferredDominance. I would defer to Brian Rzycki to make this replacement. Reviewers: chandlerc, spatel, davide, brzycki, bkramer, javed.absar Subscribers: qcolombet, sanjoy, nemanjai, nhaehnle, jlebar, tpr, kbarton, RKSimon, wmi, arsenm, llvm-commits Differential Revision: https://reviews.llvm.org/D48202 llvm-svn: 335183
2018-06-21 06:01:04 +08:00
; CHECK-NEXT: br i1 [[CMP2]], label %[[LOOP_BODY2]], label %[[EXIT2:.*]]
; CHECK: [[EXIT2]]:
; CHECK-NEXT: ret void
;
entry:
br label %loop.ph
loop.ph:
br label %loop.header
loop.header:
%iv = phi i32 [0, %loop.ph], [%inc, %loop.body]
br label %loop.body1
loop.body1:
br label %loop.body
loop.body:
%inc = add i32 %iv, 1
%cmp = icmp ult i32 %inc, 10
br i1 %cmp, label %loop.header, label %exit
exit:
br label %loop.body2
loop.body2:
%iv2 = phi i32 [0, %exit], [%inc2, %loop.body2]
%inc2 = add i32 %iv2, 1
%cmp2 = icmp ult i32 %inc2, 10
br i1 %cmp2, label %loop.body2, label %exit2
exit2:
ret void
}