maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/Mips/msa/arithmetic_float.ll

456 lines
14 KiB
LLVM
Raw Normal View History

[mips][msa] MSA requires FR=1 mode (64-bit FPU register file). Report fatal error when using it in FR=0 mode. llvm-svn: 191498
2013-09-27 18:08:31 +08:00
; RUN: llc -march=mips -mattr=+msa,+fp64 < %s | FileCheck %s
[mips][msa] Build all the tests in little and big endian modes and correct an incorrect test. Summary: This patch (correctly) breaks some MSA tests by exposing the cases when SelectionDAG::getConstant() produces illegal types. These have been temporarily marked XFAIL and the XFAIL flag will be removed when SelectionDAG::getConstant() is fixed. There are three categories of failure: * Immediate instructions are not selected in one endian mode. * Immediates used in ldi.[bhwd] must be different according to endianness. (this only affects cases where the 'wrong' ldi is used to load the correct bitpattern. E.g. (bitcast:v2i64 (build_vector:v4i32 ...))) * Non-immediate instructions that rely on immediates affected by the previous two categories as part of their match pattern. For example, the bset match pattern is the vector equivalent of 'ws | (1 << wt)'. One test needed correcting to expect different output depending on whether big or little endian was in use. This test was test/CodeGen/Mips/msa/basic_operations.ll and experiences the second category of failure shown above. The little endian version of this test is named basic_operations_little.ll and will be merged back into basic_operations.ll in a follow up commit now that FileCheck supports multiple check prefixes. Reviewers: bkramer, jacksprat, dsanders Reviewed By: dsanders CC: llvm-commits Differential Revision: http://llvm-reviews.chandlerc.com/D1972 llvm-svn: 194806
2013-11-15 19:04:16 +08:00
; RUN: llc -march=mipsel -mattr=+msa,+fp64 < %s | FileCheck %s
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
define void @add_v4f32(<4 x float>* %c, <4 x float>* %a, <4 x float>* %b) nounwind {
; CHECK: add_v4f32:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <4 x float>, <4 x float>* %a
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.w [[R1:\$w[0-9]+]], 0($5)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load <4 x float>, <4 x float>* %b
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.w [[R2:\$w[0-9]+]], 0($6)
%3 = fadd <4 x float> %1, %2
; CHECK-DAG: fadd.w [[R3:\$w[0-9]+]], [[R1]], [[R2]]
store <4 x float> %3, <4 x float>* %c
; CHECK-DAG: st.w [[R3]], 0($4)
ret void
; CHECK: .size add_v4f32
}
define void @add_v2f64(<2 x double>* %c, <2 x double>* %a, <2 x double>* %b) nounwind {
; CHECK: add_v2f64:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <2 x double>, <2 x double>* %a
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.d [[R1:\$w[0-9]+]], 0($5)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load <2 x double>, <2 x double>* %b
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.d [[R2:\$w[0-9]+]], 0($6)
%3 = fadd <2 x double> %1, %2
; CHECK-DAG: fadd.d [[R3:\$w[0-9]+]], [[R1]], [[R2]]
store <2 x double> %3, <2 x double>* %c
; CHECK-DAG: st.d [[R3]], 0($4)
ret void
; CHECK: .size add_v2f64
}
define void @sub_v4f32(<4 x float>* %c, <4 x float>* %a, <4 x float>* %b) nounwind {
; CHECK: sub_v4f32:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <4 x float>, <4 x float>* %a
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.w [[R1:\$w[0-9]+]], 0($5)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load <4 x float>, <4 x float>* %b
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.w [[R2:\$w[0-9]+]], 0($6)
%3 = fsub <4 x float> %1, %2
; CHECK-DAG: fsub.w [[R3:\$w[0-9]+]], [[R1]], [[R2]]
store <4 x float> %3, <4 x float>* %c
; CHECK-DAG: st.w [[R3]], 0($4)
ret void
; CHECK: .size sub_v4f32
}
define void @sub_v2f64(<2 x double>* %c, <2 x double>* %a, <2 x double>* %b) nounwind {
; CHECK: sub_v2f64:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <2 x double>, <2 x double>* %a
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.d [[R1:\$w[0-9]+]], 0($5)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load <2 x double>, <2 x double>* %b
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.d [[R2:\$w[0-9]+]], 0($6)
%3 = fsub <2 x double> %1, %2
; CHECK-DAG: fsub.d [[R3:\$w[0-9]+]], [[R1]], [[R2]]
store <2 x double> %3, <2 x double>* %c
; CHECK-DAG: st.d [[R3]], 0($4)
ret void
; CHECK: .size sub_v2f64
}
define void @mul_v4f32(<4 x float>* %c, <4 x float>* %a, <4 x float>* %b) nounwind {
; CHECK: mul_v4f32:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <4 x float>, <4 x float>* %a
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.w [[R1:\$w[0-9]+]], 0($5)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load <4 x float>, <4 x float>* %b
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.w [[R2:\$w[0-9]+]], 0($6)
%3 = fmul <4 x float> %1, %2
; CHECK-DAG: fmul.w [[R3:\$w[0-9]+]], [[R1]], [[R2]]
store <4 x float> %3, <4 x float>* %c
; CHECK-DAG: st.w [[R3]], 0($4)
ret void
; CHECK: .size mul_v4f32
}
define void @mul_v2f64(<2 x double>* %c, <2 x double>* %a, <2 x double>* %b) nounwind {
; CHECK: mul_v2f64:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <2 x double>, <2 x double>* %a
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.d [[R1:\$w[0-9]+]], 0($5)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load <2 x double>, <2 x double>* %b
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.d [[R2:\$w[0-9]+]], 0($6)
%3 = fmul <2 x double> %1, %2
; CHECK-DAG: fmul.d [[R3:\$w[0-9]+]], [[R1]], [[R2]]
store <2 x double> %3, <2 x double>* %c
; CHECK-DAG: st.d [[R3]], 0($4)
ret void
; CHECK: .size mul_v2f64
}
[mips][msa] Added support for matching fmadd.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192430
2013-10-11 18:14:25 +08:00
define void @fma_v4f32(<4 x float>* %d, <4 x float>* %a, <4 x float>* %b,
<4 x float>* %c) nounwind {
; CHECK: fma_v4f32:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <4 x float>, <4 x float>* %a
[mips][msa] Added support for matching fmadd.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192430
2013-10-11 18:14:25 +08:00
; CHECK-DAG: ld.w [[R1:\$w[0-9]+]], 0($5)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load <4 x float>, <4 x float>* %b
[mips][msa] Added support for matching fmadd.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192430
2013-10-11 18:14:25 +08:00
; CHECK-DAG: ld.w [[R2:\$w[0-9]+]], 0($6)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%3 = load <4 x float>, <4 x float>* %c
[mips][msa] Added support for matching fmadd.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192430
2013-10-11 18:14:25 +08:00
; CHECK-DAG: ld.w [[R3:\$w[0-9]+]], 0($7)
%4 = tail call <4 x float> @llvm.fma.v4f32 (<4 x float> %1, <4 x float> %2,
<4 x float> %3)
; CHECK-DAG: fmadd.w [[R1]], [[R2]], [[R3]]
store <4 x float> %4, <4 x float>* %d
; CHECK-DAG: st.w [[R1]], 0($4)
ret void
; CHECK: .size fma_v4f32
}
define void @fma_v2f64(<2 x double>* %d, <2 x double>* %a, <2 x double>* %b,
<2 x double>* %c) nounwind {
; CHECK: fma_v2f64:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <2 x double>, <2 x double>* %a
[mips][msa] Added support for matching fmadd.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192430
2013-10-11 18:14:25 +08:00
; CHECK-DAG: ld.d [[R1:\$w[0-9]+]], 0($5)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load <2 x double>, <2 x double>* %b
[mips][msa] Added support for matching fmadd.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192430
2013-10-11 18:14:25 +08:00
; CHECK-DAG: ld.d [[R2:\$w[0-9]+]], 0($6)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%3 = load <2 x double>, <2 x double>* %c
[mips][msa] Added support for matching fmadd.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192430
2013-10-11 18:14:25 +08:00
; CHECK-DAG: ld.d [[R3:\$w[0-9]+]], 0($7)
%4 = tail call <2 x double> @llvm.fma.v2f64 (<2 x double> %1, <2 x double> %2,
<2 x double> %3)
; CHECK-DAG: fmadd.d [[R1]], [[R2]], [[R3]]
store <2 x double> %4, <2 x double>* %d
; CHECK-DAG: st.d [[R1]], 0($4)
ret void
; CHECK: .size fma_v2f64
}
[mips][msa] Added support for matching fmsub.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192435
2013-10-11 18:27:32 +08:00
define void @fmsub_v4f32(<4 x float>* %d, <4 x float>* %a, <4 x float>* %b,
<4 x float>* %c) nounwind {
; CHECK: fmsub_v4f32:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <4 x float>, <4 x float>* %a
[mips][msa] Added support for matching fmsub.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192435
2013-10-11 18:27:32 +08:00
; CHECK-DAG: ld.w [[R1:\$w[0-9]+]], 0($5)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load <4 x float>, <4 x float>* %b
[mips][msa] Added support for matching fmsub.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192435
2013-10-11 18:27:32 +08:00
; CHECK-DAG: ld.w [[R2:\$w[0-9]+]], 0($6)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%3 = load <4 x float>, <4 x float>* %c
[mips][msa] Added support for matching fmsub.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192435
2013-10-11 18:27:32 +08:00
; CHECK-DAG: ld.w [[R3:\$w[0-9]+]], 0($7)
%4 = fmul <4 x float> %2, %3
%5 = fsub <4 x float> %1, %4
; CHECK-DAG: fmsub.w [[R1]], [[R2]], [[R3]]
store <4 x float> %5, <4 x float>* %d
; CHECK-DAG: st.w [[R1]], 0($4)
ret void
; CHECK: .size fmsub_v4f32
}
define void @fmsub_v2f64(<2 x double>* %d, <2 x double>* %a, <2 x double>* %b,
<2 x double>* %c) nounwind {
; CHECK: fmsub_v2f64:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <2 x double>, <2 x double>* %a
[mips][msa] Added support for matching fmsub.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192435
2013-10-11 18:27:32 +08:00
; CHECK-DAG: ld.d [[R1:\$w[0-9]+]], 0($5)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load <2 x double>, <2 x double>* %b
[mips][msa] Added support for matching fmsub.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192435
2013-10-11 18:27:32 +08:00
; CHECK-DAG: ld.d [[R2:\$w[0-9]+]], 0($6)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%3 = load <2 x double>, <2 x double>* %c
[mips][msa] Added support for matching fmsub.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192435
2013-10-11 18:27:32 +08:00
; CHECK-DAG: ld.d [[R3:\$w[0-9]+]], 0($7)
%4 = fmul <2 x double> %2, %3
%5 = fsub <2 x double> %1, %4
; CHECK-DAG: fmsub.d [[R1]], [[R2]], [[R3]]
store <2 x double> %5, <2 x double>* %d
; CHECK-DAG: st.d [[R1]], 0($4)
ret void
; CHECK: .size fmsub_v2f64
}
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
define void @fdiv_v4f32(<4 x float>* %c, <4 x float>* %a, <4 x float>* %b) nounwind {
; CHECK: fdiv_v4f32:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <4 x float>, <4 x float>* %a
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.w [[R1:\$w[0-9]+]], 0($5)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load <4 x float>, <4 x float>* %b
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.w [[R2:\$w[0-9]+]], 0($6)
%3 = fdiv <4 x float> %1, %2
; CHECK-DAG: fdiv.w [[R3:\$w[0-9]+]], [[R1]], [[R2]]
store <4 x float> %3, <4 x float>* %c
; CHECK-DAG: st.w [[R3]], 0($4)
ret void
; CHECK: .size fdiv_v4f32
}
define void @fdiv_v2f64(<2 x double>* %c, <2 x double>* %a, <2 x double>* %b) nounwind {
; CHECK: fdiv_v2f64:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <2 x double>, <2 x double>* %a
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.d [[R1:\$w[0-9]+]], 0($5)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load <2 x double>, <2 x double>* %b
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.d [[R2:\$w[0-9]+]], 0($6)
%3 = fdiv <2 x double> %1, %2
; CHECK-DAG: fdiv.d [[R3:\$w[0-9]+]], [[R1]], [[R2]]
store <2 x double> %3, <2 x double>* %c
; CHECK-DAG: st.d [[R3]], 0($4)
ret void
; CHECK: .size fdiv_v2f64
}
[mips][msa] Added partial support for matching fmax_a from normal IR (i.e. not intrinsics) This covers the case where fmax_a can be used to implement ISD::FABS. llvm-svn: 191296
2013-09-24 21:02:08 +08:00
define void @fabs_v4f32(<4 x float>* %c, <4 x float>* %a) nounwind {
; CHECK: fabs_v4f32:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <4 x float>, <4 x float>* %a
[mips][msa] Added partial support for matching fmax_a from normal IR (i.e. not intrinsics) This covers the case where fmax_a can be used to implement ISD::FABS. llvm-svn: 191296
2013-09-24 21:02:08 +08:00
; CHECK-DAG: ld.w [[R1:\$w[0-9]+]], 0($5)
%2 = tail call <4 x float> @llvm.fabs.v4f32 (<4 x float> %1)
; CHECK-DAG: fmax_a.w [[R3:\$w[0-9]+]], [[R1]], [[R1]]
store <4 x float> %2, <4 x float>* %c
; CHECK-DAG: st.w [[R3]], 0($4)
ret void
; CHECK: .size fabs_v4f32
}
define void @fabs_v2f64(<2 x double>* %c, <2 x double>* %a) nounwind {
; CHECK: fabs_v2f64:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <2 x double>, <2 x double>* %a
[mips][msa] Added partial support for matching fmax_a from normal IR (i.e. not intrinsics) This covers the case where fmax_a can be used to implement ISD::FABS. llvm-svn: 191296
2013-09-24 21:02:08 +08:00
; CHECK-DAG: ld.d [[R1:\$w[0-9]+]], 0($5)
%2 = tail call <2 x double> @llvm.fabs.v2f64 (<2 x double> %1)
; CHECK-DAG: fmax_a.d [[R3:\$w[0-9]+]], [[R1]], [[R1]]
store <2 x double> %2, <2 x double>* %c
; CHECK-DAG: st.d [[R3]], 0($4)
ret void
; CHECK: .size fabs_v2f64
}
[mips][msa] Added support for matching fexp2 from normal IR (i.e. not intrinsics) llvm-svn: 193239
2013-10-23 18:36:52 +08:00
define void @fexp2_v4f32(<4 x float>* %c, <4 x float>* %a) nounwind {
; CHECK: fexp2_v4f32:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <4 x float>, <4 x float>* %a
[mips][msa] Added support for matching fexp2 from normal IR (i.e. not intrinsics) llvm-svn: 193239
2013-10-23 18:36:52 +08:00
; CHECK-DAG: ld.w [[R1:\$w[0-9]+]], 0($5)
%2 = tail call <4 x float> @llvm.exp2.v4f32 (<4 x float> %1)
; CHECK-DAG: ldi.w [[R3:\$w[0-9]+]], 1
; CHECK-DAG: ffint_u.w [[R4:\$w[0-9]+]], [[R3]]
; CHECK-DAG: fexp2.w [[R4:\$w[0-9]+]], [[R3]], [[R1]]
store <4 x float> %2, <4 x float>* %c
; CHECK-DAG: st.w [[R4]], 0($4)
ret void
; CHECK: .size fexp2_v4f32
}
define void @fexp2_v2f64(<2 x double>* %c, <2 x double>* %a) nounwind {
; CHECK: fexp2_v2f64:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <2 x double>, <2 x double>* %a
[mips][msa] Added support for matching fexp2 from normal IR (i.e. not intrinsics) llvm-svn: 193239
2013-10-23 18:36:52 +08:00
; CHECK-DAG: ld.d [[R1:\$w[0-9]+]], 0($5)
%2 = tail call <2 x double> @llvm.exp2.v2f64 (<2 x double> %1)
; CHECK-DAG: ldi.d [[R3:\$w[0-9]+]], 1
; CHECK-DAG: ffint_u.d [[R4:\$w[0-9]+]], [[R3]]
; CHECK-DAG: fexp2.d [[R4:\$w[0-9]+]], [[R3]], [[R1]]
store <2 x double> %2, <2 x double>* %c
; CHECK-DAG: st.d [[R4]], 0($4)
ret void
; CHECK: .size fexp2_v2f64
}
define void @fexp2_v4f32_2(<4 x float>* %c, <4 x float>* %a) nounwind {
; CHECK: fexp2_v4f32_2:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <4 x float>, <4 x float>* %a
[mips][msa] Added support for matching fexp2 from normal IR (i.e. not intrinsics) llvm-svn: 193239
2013-10-23 18:36:52 +08:00
; CHECK-DAG: ld.w [[R1:\$w[0-9]+]], 0($5)
%2 = tail call <4 x float> @llvm.exp2.v4f32 (<4 x float> %1)
%3 = fmul <4 x float> <float 2.0, float 2.0, float 2.0, float 2.0>, %2
Fix fmul combines with constant splat vectors Fixes things like fmul x, 2 -> fadd x, x llvm-svn: 215820
2014-08-16 18:14:19 +08:00
; CHECK-DAG: ldi.w [[R3:\$w[0-9]+]], 1
; CHECK-DAG: ffint_u.w [[R4:\$w[0-9]+]], [[R3]]
[mips][msa] Added support for matching fexp2 from normal IR (i.e. not intrinsics) llvm-svn: 193239
2013-10-23 18:36:52 +08:00
; CHECK-DAG: fexp2.w [[R5:\$w[0-9]+]], [[R4]], [[R1]]
store <4 x float> %3, <4 x float>* %c
; CHECK-DAG: st.w [[R5]], 0($4)
ret void
; CHECK: .size fexp2_v4f32_2
}
define void @fexp2_v2f64_2(<2 x double>* %c, <2 x double>* %a) nounwind {
; CHECK: fexp2_v2f64_2:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <2 x double>, <2 x double>* %a
[mips][msa] Added support for matching fexp2 from normal IR (i.e. not intrinsics) llvm-svn: 193239
2013-10-23 18:36:52 +08:00
; CHECK-DAG: ld.d [[R1:\$w[0-9]+]], 0($5)
%2 = tail call <2 x double> @llvm.exp2.v2f64 (<2 x double> %1)
%3 = fmul <2 x double> <double 2.0, double 2.0>, %2
Fix fmul combines with constant splat vectors Fixes things like fmul x, 2 -> fadd x, x llvm-svn: 215820
2014-08-16 18:14:19 +08:00
; CHECK-DAG: ldi.d [[R2:\$w[0-9]+]], 1
; CHECK-DAG: ffint_u.d [[R3:\$w[0-9]+]], [[R2]]
[mips][msa] Added support for matching fexp2 from normal IR (i.e. not intrinsics) llvm-svn: 193239
2013-10-23 18:36:52 +08:00
; CHECK-DAG: fexp2.d [[R4:\$w[0-9]+]], [[R3]], [[R1]]
store <2 x double> %3, <2 x double>* %c
; CHECK-DAG: st.d [[R4]], 0($4)
ret void
; CHECK: .size fexp2_v2f64_2
}
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
define void @fsqrt_v4f32(<4 x float>* %c, <4 x float>* %a) nounwind {
; CHECK: fsqrt_v4f32:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <4 x float>, <4 x float>* %a
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.w [[R1:\$w[0-9]+]], 0($5)
%2 = tail call <4 x float> @llvm.sqrt.v4f32 (<4 x float> %1)
; CHECK-DAG: fsqrt.w [[R3:\$w[0-9]+]], [[R1]]
store <4 x float> %2, <4 x float>* %c
; CHECK-DAG: st.w [[R3]], 0($4)
ret void
; CHECK: .size fsqrt_v4f32
}
define void @fsqrt_v2f64(<2 x double>* %c, <2 x double>* %a) nounwind {
; CHECK: fsqrt_v2f64:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <2 x double>, <2 x double>* %a
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
; CHECK-DAG: ld.d [[R1:\$w[0-9]+]], 0($5)
%2 = tail call <2 x double> @llvm.sqrt.v2f64 (<2 x double> %1)
; CHECK-DAG: fsqrt.d [[R3:\$w[0-9]+]], [[R1]]
store <2 x double> %2, <2 x double>* %c
; CHECK-DAG: st.d [[R3]], 0($4)
ret void
; CHECK: .size fsqrt_v2f64
}
[mips][msa] Added support for matching ffint_[us].[wd], and ftrunc_[us].[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192429
2013-10-11 18:00:06 +08:00
define void @ffint_u_v4f32(<4 x float>* %c, <4 x i32>* %a) nounwind {
; CHECK: ffint_u_v4f32:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <4 x i32>, <4 x i32>* %a
[mips][msa] Added support for matching ffint_[us].[wd], and ftrunc_[us].[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192429
2013-10-11 18:00:06 +08:00
; CHECK-DAG: ld.w [[R1:\$w[0-9]+]], 0($5)
%2 = uitofp <4 x i32> %1 to <4 x float>
; CHECK-DAG: ffint_u.w [[R3:\$w[0-9]+]], [[R1]]
store <4 x float> %2, <4 x float>* %c
; CHECK-DAG: st.w [[R3]], 0($4)
ret void
; CHECK: .size ffint_u_v4f32
}
define void @ffint_u_v2f64(<2 x double>* %c, <2 x i64>* %a) nounwind {
; CHECK: ffint_u_v2f64:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <2 x i64>, <2 x i64>* %a
[mips][msa] Added support for matching ffint_[us].[wd], and ftrunc_[us].[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192429
2013-10-11 18:00:06 +08:00
; CHECK-DAG: ld.d [[R1:\$w[0-9]+]], 0($5)
%2 = uitofp <2 x i64> %1 to <2 x double>
; CHECK-DAG: ffint_u.d [[R3:\$w[0-9]+]], [[R1]]
store <2 x double> %2, <2 x double>* %c
; CHECK-DAG: st.d [[R3]], 0($4)
ret void
; CHECK: .size ffint_u_v2f64
}
define void @ffint_s_v4f32(<4 x float>* %c, <4 x i32>* %a) nounwind {
; CHECK: ffint_s_v4f32:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <4 x i32>, <4 x i32>* %a
[mips][msa] Added support for matching ffint_[us].[wd], and ftrunc_[us].[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192429
2013-10-11 18:00:06 +08:00
; CHECK-DAG: ld.w [[R1:\$w[0-9]+]], 0($5)
%2 = sitofp <4 x i32> %1 to <4 x float>
; CHECK-DAG: ffint_s.w [[R3:\$w[0-9]+]], [[R1]]
store <4 x float> %2, <4 x float>* %c
; CHECK-DAG: st.w [[R3]], 0($4)
ret void
; CHECK: .size ffint_s_v4f32
}
define void @ffint_s_v2f64(<2 x double>* %c, <2 x i64>* %a) nounwind {
; CHECK: ffint_s_v2f64:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <2 x i64>, <2 x i64>* %a
[mips][msa] Added support for matching ffint_[us].[wd], and ftrunc_[us].[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192429
2013-10-11 18:00:06 +08:00
; CHECK-DAG: ld.d [[R1:\$w[0-9]+]], 0($5)
%2 = sitofp <2 x i64> %1 to <2 x double>
; CHECK-DAG: ffint_s.d [[R3:\$w[0-9]+]], [[R1]]
store <2 x double> %2, <2 x double>* %c
; CHECK-DAG: st.d [[R3]], 0($4)
ret void
; CHECK: .size ffint_s_v2f64
}
define void @ftrunc_u_v4f32(<4 x i32>* %c, <4 x float>* %a) nounwind {
; CHECK: ftrunc_u_v4f32:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <4 x float>, <4 x float>* %a
[mips][msa] Added support for matching ffint_[us].[wd], and ftrunc_[us].[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192429
2013-10-11 18:00:06 +08:00
; CHECK-DAG: ld.w [[R1:\$w[0-9]+]], 0($5)
%2 = fptoui <4 x float> %1 to <4 x i32>
; CHECK-DAG: ftrunc_u.w [[R3:\$w[0-9]+]], [[R1]]
store <4 x i32> %2, <4 x i32>* %c
; CHECK-DAG: st.w [[R3]], 0($4)
ret void
; CHECK: .size ftrunc_u_v4f32
}
define void @ftrunc_u_v2f64(<2 x i64>* %c, <2 x double>* %a) nounwind {
; CHECK: ftrunc_u_v2f64:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <2 x double>, <2 x double>* %a
[mips][msa] Added support for matching ffint_[us].[wd], and ftrunc_[us].[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192429
2013-10-11 18:00:06 +08:00
; CHECK-DAG: ld.d [[R1:\$w[0-9]+]], 0($5)
%2 = fptoui <2 x double> %1 to <2 x i64>
; CHECK-DAG: ftrunc_u.d [[R3:\$w[0-9]+]], [[R1]]
store <2 x i64> %2, <2 x i64>* %c
; CHECK-DAG: st.d [[R3]], 0($4)
ret void
; CHECK: .size ftrunc_u_v2f64
}
define void @ftrunc_s_v4f32(<4 x i32>* %c, <4 x float>* %a) nounwind {
; CHECK: ftrunc_s_v4f32:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <4 x float>, <4 x float>* %a
[mips][msa] Added support for matching ffint_[us].[wd], and ftrunc_[us].[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192429
2013-10-11 18:00:06 +08:00
; CHECK-DAG: ld.w [[R1:\$w[0-9]+]], 0($5)
%2 = fptosi <4 x float> %1 to <4 x i32>
; CHECK-DAG: ftrunc_s.w [[R3:\$w[0-9]+]], [[R1]]
store <4 x i32> %2, <4 x i32>* %c
; CHECK-DAG: st.w [[R3]], 0($4)
ret void
; CHECK: .size ftrunc_s_v4f32
}
define void @ftrunc_s_v2f64(<2 x i64>* %c, <2 x double>* %a) nounwind {
; CHECK: ftrunc_s_v2f64:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load <2 x double>, <2 x double>* %a
[mips][msa] Added support for matching ffint_[us].[wd], and ftrunc_[us].[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192429
2013-10-11 18:00:06 +08:00
; CHECK-DAG: ld.d [[R1:\$w[0-9]+]], 0($5)
%2 = fptosi <2 x double> %1 to <2 x i64>
; CHECK-DAG: ftrunc_s.d [[R3:\$w[0-9]+]], [[R1]]
store <2 x i64> %2, <2 x i64>* %c
; CHECK-DAG: st.d [[R3]], 0($4)
ret void
; CHECK: .size ftrunc_s_v2f64
}
[mips][msa] Added partial support for matching fmax_a from normal IR (i.e. not intrinsics) This covers the case where fmax_a can be used to implement ISD::FABS. llvm-svn: 191296
2013-09-24 21:02:08 +08:00
declare <4 x float> @llvm.fabs.v4f32(<4 x float> %Val)
declare <2 x double> @llvm.fabs.v2f64(<2 x double> %Val)
[mips][msa] Added support for matching fexp2 from normal IR (i.e. not intrinsics) llvm-svn: 193239
2013-10-23 18:36:52 +08:00
declare <4 x float> @llvm.exp2.v4f32(<4 x float> %val)
declare <2 x double> @llvm.exp2.v2f64(<2 x double> %val)
[mips][msa] Added support for matching fmadd.[wd] from normal IR (i.e. not intrinsics) llvm-svn: 192430
2013-10-11 18:14:25 +08:00
declare <4 x float> @llvm.fma.v4f32(<4 x float> %a, <4 x float> %b,
<4 x float> %c)
declare <2 x double> @llvm.fma.v2f64(<2 x double> %a, <2 x double> %b,
<2 x double> %c)
[mips][msa] Added test cases that were supposed to be part of r190507, r190509, r190512, and r190518. llvm-svn: 190522
2013-09-11 20:39:25 +08:00
declare <4 x float> @llvm.sqrt.v4f32(<4 x float> %Val)
declare <2 x double> @llvm.sqrt.v2f64(<2 x double> %Val)