maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/DebugInfo/Generic/incorrect-variable-debugloc.ll

391 lines
15 KiB
LLVM
Raw Normal View History

DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
; REQUIRES: object-emission
; RUN: %llc_dwarf -O2 -filetype=obj < %s | llvm-dwarfdump -debug-dump=info - | FileCheck %s
; This is a test case that's as reduced as I can get it, though I haven't fully
; understood the mechanisms by which this bug occurs, so perhaps there's further
; simplification to be had (it's certainly a bit non-obvious what's going on). I
; hesitate to hand-craft or otherwise simplify the IR compared to what Clang
; generates as this is a particular tickling of optimizations and debug location
; propagation I want a realistic example of.
; Generated with clang-tot -cc1 -g -O2 -w -std=c++11 -fsanitize=address,use-after-return -fcxx-exceptions -fexceptions -x c++ incorrect-variable-debug-loc.cpp -emit-llvm
; struct A {
; int m_fn1();
; };
;
; struct B {
; void __attribute__((always_inline)) m_fn2() { i = 0; }
; int i;
; };
;
; struct C {
; void m_fn3();
; int j;
; B b;
; };
;
; int fn1() {
; C A;
; A.b.m_fn2();
; A.m_fn3();
; }
; void C::m_fn3() {
; A().m_fn1();
; b.m_fn2();
; }
; CHECK: DW_TAG_structure_type
; CHECK-NEXT: DW_AT_name {{.*}} "C"
Make DW_AT_[MIPS_]linkage_name optional, and off by default for SCE. Mangled "linkage" names can be huge, and if the debugger (or other tools) have no use for them, the size savings can be very impressive (on the order of 40%). Add one test for controlling behavior, and modify a number of tests to either stop using linkage names, or make llc emit them (so these tests will still run when the default triple is for PS4). Differential Revision: http://reviews.llvm.org/D11374 llvm-svn: 244678
2015-08-12 05:36:45 +08:00
; CHECK: [[M_FN3_DECL:.*]]: DW_TAG_subprogram
; CHECK-NOT: {{DW_TAG|NULL}}
DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
; CHECK: DW_AT_name {{.*}} "m_fn3"
Make DW_AT_[MIPS_]linkage_name optional, and off by default for SCE. Mangled "linkage" names can be huge, and if the debugger (or other tools) have no use for them, the size savings can be very impressive (on the order of 40%). Add one test for controlling behavior, and modify a number of tests to either stop using linkage names, or make llc emit them (so these tests will still run when the default triple is for PS4). Differential Revision: http://reviews.llvm.org/D11374 llvm-svn: 244678
2015-08-12 05:36:45 +08:00
; CHECK: DW_AT_specification {{.*}} {[[M_FN3_DECL]]}
DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
; CHECK-NOT: DW_TAG
; CHECK: DW_TAG_formal_parameter
; CHECK-NOT: DW_TAG
; CHECK: DW_AT_name {{.*}} "this"
%struct.C = type { i32, %struct.B }
%struct.B = type { i32 }
%struct.A = type { i8 }
@llvm.global_ctors = appending global [1 x { i32, void ()* }] [{ i32, void ()* } { i32 1, void ()* @asan.module_ctor }]
@__asan_option_detect_stack_use_after_return = external global i32
@__asan_gen_ = private unnamed_addr constant [11 x i8] c"1 32 8 1 A\00", align 1
@__asan_gen_1 = private unnamed_addr constant [13 x i8] c"1 32 1 3 tmp\00", align 1
; Function Attrs: noreturn sanitize_address
DI: Reverse direction of subprogram -> function edge. Previously, subprograms contained a metadata reference to the function they described. Because most clients need to get or set a subprogram for a given function rather than the other way around, this created unneeded inefficiency. For example, many passes needed to call the function llvm::makeSubprogramMap() to build a mapping from functions to subprograms, and the IR linker needed to fix up function references in a way that caused quadratic complexity in the IR linking phase of LTO. This change reverses the direction of the edge by storing the subprogram as function-level metadata and removing DISubprogram's function field. Since this is an IR change, a bitcode upgrade has been provided. Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is attached to the PR. Differential Revision: http://reviews.llvm.org/D14265 llvm-svn: 252219
2015-11-06 06:03:56 +08:00
define i32 @_Z3fn1v() #0 !dbg !22 {
DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
entry:
%MyAlloca = alloca [64 x i8], align 32, !dbg !39
%0 = ptrtoint [64 x i8]* %MyAlloca to i64, !dbg !39
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load i32, i32* @__asan_option_detect_stack_use_after_return, !dbg !39
DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
%2 = icmp ne i32 %1, 0, !dbg !39
br i1 %2, label %3, label %5
; <label>:3 ; preds = %entry
%4 = call i64 @__asan_stack_malloc_0(i64 64, i64 %0), !dbg !39
br label %5
; <label>:5 ; preds = %entry, %3
%6 = phi i64 [ %0, %entry ], [ %4, %3 ], !dbg !39
%7 = add i64 %6, 32, !dbg !39
%8 = inttoptr i64 %7 to %struct.C*, !dbg !39
%9 = inttoptr i64 %6 to i64*, !dbg !39
store i64 1102416563, i64* %9, !dbg !39
%10 = add i64 %6, 8, !dbg !39
%11 = inttoptr i64 %10 to i64*, !dbg !39
store i64 ptrtoint ([11 x i8]* @__asan_gen_ to i64), i64* %11, !dbg !39
%12 = add i64 %6, 16, !dbg !39
%13 = inttoptr i64 %12 to i64*, !dbg !39
store i64 ptrtoint (i32 ()* @_Z3fn1v to i64), i64* %13, !dbg !39
%14 = lshr i64 %6, 3, !dbg !39
%15 = add i64 %14, 2147450880, !dbg !39
%16 = add i64 %15, 0, !dbg !39
%17 = inttoptr i64 %16 to i64*, !dbg !39
store i64 -868083117767659023, i64* %17, !dbg !39
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%i.i = getelementptr inbounds %struct.C, %struct.C* %8, i64 0, i32 1, i32 0, !dbg !39
DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
%18 = ptrtoint i32* %i.i to i64, !dbg !39
%19 = lshr i64 %18, 3, !dbg !39
%20 = add i64 %19, 2147450880, !dbg !39
%21 = inttoptr i64 %20 to i8*, !dbg !39
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%22 = load i8, i8* %21, !dbg !39
DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
%23 = icmp ne i8 %22, 0, !dbg !39
br i1 %23, label %24, label %30, !dbg !39
; <label>:24 ; preds = %5
%25 = and i64 %18, 7, !dbg !39
%26 = add i64 %25, 3, !dbg !39
%27 = trunc i64 %26 to i8, !dbg !39
%28 = icmp sge i8 %27, %22, !dbg !39
br i1 %28, label %29, label %30
; <label>:29 ; preds = %24
call void @__asan_report_store4(i64 %18), !dbg !39
call void asm sideeffect "", ""()
unreachable
; <label>:30 ; preds = %24, %5
store i32 0, i32* %i.i, align 4, !dbg !39, !tbaa !41
Reapply r257105 "[Verifier] Check that debug values have proper size" I originally reapplied this in 257550, but had to revert again due to bot breakage. The only change in this version is to allow either the TypeSize or the TypeAllocSize of the variable to be the one represented in debug info (hopefully in the future we can figure out how to encode the difference). Additionally, several bot failures following r257550, were due to optimizer bugs now fixed in r257787 and r257795. r257550 commit message was: ``` The follow extra changes were made to test cases: Manually making the variable be the actual type instead of a pointer to avoid pointer-size differences in generic code: LLVM :: DebugInfo/Generic/2010-03-24-MemberFn.ll LLVM :: DebugInfo/Generic/2010-04-06-NestedFnDbgInfo.ll LLVM :: DebugInfo/Generic/2010-05-03-DisableFramePtr.ll LLVM :: DebugInfo/Generic/varargs.ll Delete sizing information from debug info for the same reason (but the presence of the pointer was important to the test case): LLVM :: DebugInfo/Generic/restrict.ll LLVM :: DebugInfo/Generic/tu-composite.ll LLVM :: Linker/type-unique-type-array-a.ll LLVM :: Linker/type-unique-simple2.ll Fixing an incorrect DW_OP_deref LLVM :: DebugInfo/Generic/2010-05-03-OriginDIE.ll Fixing a missing DW_OP_deref LLVM :: DebugInfo/Generic/incorrect-variable-debugloc.ll Additionally, clang should no longer complain during bootstrap should no longer happen after r257534. The original commit message was: `` Summary: Teach the Verifier to make sure that the storage size given to llvm.dbg.declare or the value size given to llvm.dbg.value agree with what is declared in DebugInfo. This is implicitly assumed in a number of passes (e.g. in SROA). Additionally this catches a number of common mistakes, such as passing a pointer when a value was intended or vice versa. One complication comes from stack coloring which modifies the original IR when it merges allocas in order to make sure that if AA falls back to the IR it gets the correct result. However, given this new invariant, indiscriminately replacing one alloca by a different (differently sized one) is no longer valid. Fix this by just undefing out any use of the alloca in a dbg.declare in this case. Additionally, I had to fix a number of test cases. Of particular note: - I regenerated dbg-changes-codegen-branch-folding.ll from the given source as it was affected by the bug fixed in r256077 - two-cus-from-same-file.ll was changed to avoid having a variable-typed debug variable as that would depend on the target, even though this test is supposed to be generic - I had to manually declared size/align for reference type. See also the discussion for D14275/r253186. - fpstack-debuginstr-kill.ll required changing `double` to `long double` - most others were just a question of adding OP_deref `` ``` llvm-svn: 257850
2016-01-15 08:46:17 +08:00
tail call void @llvm.dbg.value(metadata %struct.C* %8, i64 0, metadata !27, metadata !DIExpression(DW_OP_deref)), !dbg !46
DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
call void @_ZN1C5m_fn3Ev(%struct.C* %8), !dbg !47
unreachable, !dbg !47
}
; Function Attrs: sanitize_address
DI: Reverse direction of subprogram -> function edge. Previously, subprograms contained a metadata reference to the function they described. Because most clients need to get or set a subprogram for a given function rather than the other way around, this created unneeded inefficiency. For example, many passes needed to call the function llvm::makeSubprogramMap() to build a mapping from functions to subprograms, and the IR linker needed to fix up function references in a way that caused quadratic complexity in the IR linking phase of LTO. This change reverses the direction of the edge by storing the subprogram as function-level metadata and removing DISubprogram's function field. Since this is an IR change, a bitcode upgrade has been provided. Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is attached to the PR. Differential Revision: http://reviews.llvm.org/D14265 llvm-svn: 252219
2015-11-06 06:03:56 +08:00
define void @_ZN1C5m_fn3Ev(%struct.C* nocapture %this) #1 align 2 !dbg !28 {
DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
entry:
%MyAlloca = alloca [64 x i8], align 32, !dbg !48
%0 = ptrtoint [64 x i8]* %MyAlloca to i64, !dbg !48
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load i32, i32* @__asan_option_detect_stack_use_after_return, !dbg !48
DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
%2 = icmp ne i32 %1, 0, !dbg !48
br i1 %2, label %3, label %5
; <label>:3 ; preds = %entry
%4 = call i64 @__asan_stack_malloc_0(i64 64, i64 %0), !dbg !48
br label %5
; <label>:5 ; preds = %entry, %3
%6 = phi i64 [ %0, %entry ], [ %4, %3 ], !dbg !48
%7 = add i64 %6, 32, !dbg !48
%8 = inttoptr i64 %7 to %struct.A*, !dbg !48
%9 = inttoptr i64 %6 to i64*, !dbg !48
store i64 1102416563, i64* %9, !dbg !48
%10 = add i64 %6, 8, !dbg !48
%11 = inttoptr i64 %10 to i64*, !dbg !48
store i64 ptrtoint ([13 x i8]* @__asan_gen_1 to i64), i64* %11, !dbg !48
%12 = add i64 %6, 16, !dbg !48
%13 = inttoptr i64 %12 to i64*, !dbg !48
store i64 ptrtoint (void (%struct.C*)* @_ZN1C5m_fn3Ev to i64), i64* %13, !dbg !48
%14 = lshr i64 %6, 3, !dbg !48
%15 = add i64 %14, 2147450880, !dbg !48
%16 = add i64 %15, 0, !dbg !48
%17 = inttoptr i64 %16 to i64*, !dbg !48
store i64 -868083113472691727, i64* %17, !dbg !48
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
tail call void @llvm.dbg.value(metadata %struct.C* %this, i64 0, metadata !30, metadata !DIExpression()), !dbg !48
DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
%call = call i32 @_ZN1A5m_fn1Ev(%struct.A* %8), !dbg !49
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%i.i = getelementptr inbounds %struct.C, %struct.C* %this, i64 0, i32 1, i32 0, !dbg !50
DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
%18 = ptrtoint i32* %i.i to i64, !dbg !50
%19 = lshr i64 %18, 3, !dbg !50
%20 = add i64 %19, 2147450880, !dbg !50
%21 = inttoptr i64 %20 to i8*, !dbg !50
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%22 = load i8, i8* %21, !dbg !50
DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
%23 = icmp ne i8 %22, 0, !dbg !50
br i1 %23, label %24, label %30, !dbg !50
; <label>:24 ; preds = %5
%25 = and i64 %18, 7, !dbg !50
%26 = add i64 %25, 3, !dbg !50
%27 = trunc i64 %26 to i8, !dbg !50
%28 = icmp sge i8 %27, %22, !dbg !50
br i1 %28, label %29, label %30
; <label>:29 ; preds = %24
call void @__asan_report_store4(i64 %18), !dbg !50
call void asm sideeffect "", ""()
unreachable
; <label>:30 ; preds = %24, %5
store i32 0, i32* %i.i, align 4, !dbg !50, !tbaa !41
store i64 1172321806, i64* %9, !dbg !52
%31 = icmp ne i64 %6, %0, !dbg !52
br i1 %31, label %32, label %39, !dbg !52
; <label>:32 ; preds = %30
%33 = add i64 %15, 0, !dbg !52
%34 = inttoptr i64 %33 to i64*, !dbg !52
store i64 -723401728380766731, i64* %34, !dbg !52
%35 = add i64 %6, 56, !dbg !52
%36 = inttoptr i64 %35 to i64*, !dbg !52
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%37 = load i64, i64* %36, !dbg !52
DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
%38 = inttoptr i64 %37 to i8*, !dbg !52
store i8 0, i8* %38, !dbg !52
br label %42, !dbg !52
; <label>:39 ; preds = %30
%40 = add i64 %15, 0, !dbg !52
%41 = inttoptr i64 %40 to i64*, !dbg !52
store i64 0, i64* %41, !dbg !52
br label %42, !dbg !52
; <label>:42 ; preds = %39, %32
ret void, !dbg !52
}
declare i32 @_ZN1A5m_fn1Ev(%struct.A*) #2
; Function Attrs: nounwind readnone
Move the complex address expression out of DIVariable and into an extra argument of the llvm.dbg.declare/llvm.dbg.value intrinsics. Previously, DIVariable was a variable-length field that has an optional reference to a Metadata array consisting of a variable number of complex address expressions. In the case of OpPiece expressions this is wasting a lot of storage in IR, because when an aggregate type is, e.g., SROA'd into all of its n individual members, the IR will contain n copies of the DIVariable, all alike, only differing in the complex address reference at the end. By making the complex address into an extra argument of the dbg.value/dbg.declare intrinsics, all of the pieces can reference the same variable and the complex address expressions can be uniqued across the CU, too. Down the road, this will allow us to move other flags, such as "indirection" out of the DIVariable, too. The new intrinsics look like this: declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr) declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr) This patch adds a new LLVM-local tag to DIExpressions, so we can detect and pretty-print DIExpression metadata nodes. What this patch doesn't do: This patch does not touch the "Indirect" field in DIVariable; but moving that into the expression would be a natural next step. http://reviews.llvm.org/D4919 rdar://problem/17994491 Thanks to dblaikie and dexonsmith for reviewing this patch! Note: I accidentally committed a bogus older version of this patch previously. llvm-svn: 218787
2014-10-02 02:55:02 +08:00
declare void @llvm.dbg.value(metadata, i64, metadata, metadata) #3
DebugInfo: Assert that DbgVariables have associated DIEs This was previously committed in r209680 and reverted in r209683 after it caused sanitizer builds to crash. The issue seems to be that the DebugLoc associated with dbg.value IR intrinsics isn't necessarily accurate. Instead, we duplicate the DIVariables and add an InlinedAt field to them to record their location. We were using this InlinedAt field to compute the LexicalScope for the variable, but not using it in the abstract DbgVariable construction and mapping. This resulted in a formal parameter to the current concrete function, correctly having no InlinedAt information, but incorrectly having a DebugLoc that described an inlined location within the function... thus an abstract DbgVariable was created for the variable, but its DIE was never constructed (since the LexicalScope had no such variable). This DbgVariable was silently ignored (by testing for a non-null DIE on the abstract DbgVariable). So, fix this by using the right scoping information when constructing abstract DbgVariables. In the long run, I suspect we want to undo the work that added this second kind of location tracking and fix the places where the DebugLoc propagation on the dbg.value intrinsic fails. This will shrink debug info (by not duplicating DIVariables), make it more efficient (by not having to construct new DIVariable metadata nodes to try to map back to a single variable), and benefit all instructions. But perhaps there are insurmountable issues with DebugLoc quality that I'm unaware of... I just don't know how we can't /just keep the DebugLoc from the dbg.declare to the dbg.values and never get this wrong/. Some history context: http://llvm.org/viewvc/llvm-project?view=revision&revision=135629 http://llvm.org/viewvc/llvm-project?view=revision&revision=137253 llvm-svn: 209984
2014-06-01 11:38:13 +08:00
define internal void @asan.module_ctor() {
tail call void @__asan_init_v3()
ret void
}
declare void @__asan_init_v3()
declare void @__asan_report_load1(i64)
declare void @__asan_load1(i64)
declare void @__asan_report_load2(i64)
declare void @__asan_load2(i64)
declare void @__asan_report_load4(i64)
declare void @__asan_load4(i64)
declare void @__asan_report_load8(i64)
declare void @__asan_load8(i64)
declare void @__asan_report_load16(i64)
declare void @__asan_load16(i64)
declare void @__asan_report_store1(i64)
declare void @__asan_store1(i64)
declare void @__asan_report_store2(i64)
declare void @__asan_store2(i64)
declare void @__asan_report_store4(i64)
declare void @__asan_store4(i64)
declare void @__asan_report_store8(i64)
declare void @__asan_store8(i64)
declare void @__asan_report_store16(i64)
declare void @__asan_store16(i64)
declare void @__asan_report_load_n(i64, i64)
declare void @__asan_report_store_n(i64, i64)
declare void @__asan_loadN(i64, i64)
declare void @__asan_storeN(i64, i64)
declare i8* @__asan_memmove(i8*, i8*, i64)
declare i8* @__asan_memcpy(i8*, i8*, i64)
declare i8* @__asan_memset(i8*, i32, i64)
declare void @__asan_handle_no_return()
declare void @__sanitizer_cov()
declare void @__sanitizer_ptr_cmp(i64, i64)
declare void @__sanitizer_ptr_sub(i64, i64)
declare i64 @__asan_stack_malloc_0(i64, i64)
declare void @__asan_stack_free_0(i64, i64, i64)
declare i64 @__asan_stack_malloc_1(i64, i64)
declare void @__asan_stack_free_1(i64, i64, i64)
declare i64 @__asan_stack_malloc_2(i64, i64)
declare void @__asan_stack_free_2(i64, i64, i64)
declare i64 @__asan_stack_malloc_3(i64, i64)
declare void @__asan_stack_free_3(i64, i64, i64)
declare i64 @__asan_stack_malloc_4(i64, i64)
declare void @__asan_stack_free_4(i64, i64, i64)
declare i64 @__asan_stack_malloc_5(i64, i64)
declare void @__asan_stack_free_5(i64, i64, i64)
declare i64 @__asan_stack_malloc_6(i64, i64)
declare void @__asan_stack_free_6(i64, i64, i64)
declare i64 @__asan_stack_malloc_7(i64, i64)
declare void @__asan_stack_free_7(i64, i64, i64)
declare i64 @__asan_stack_malloc_8(i64, i64)
declare void @__asan_stack_free_8(i64, i64, i64)
declare i64 @__asan_stack_malloc_9(i64, i64)
declare void @__asan_stack_free_9(i64, i64, i64)
declare i64 @__asan_stack_malloc_10(i64, i64)
declare void @__asan_stack_free_10(i64, i64, i64)
declare void @__asan_poison_stack_memory(i64, i64)
declare void @__asan_unpoison_stack_memory(i64, i64)
declare void @__asan_before_dynamic_init(i64)
declare void @__asan_after_dynamic_init()
declare void @__asan_register_globals(i64, i64)
declare void @__asan_unregister_globals(i64, i64)
declare void @__sanitizer_cov_module_init(i64)
attributes #0 = { noreturn sanitize_address "less-precise-fpmad"="false" "no-frame-pointer-elim"="false" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "no-realign-stack" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
attributes #1 = { sanitize_address "less-precise-fpmad"="false" "no-frame-pointer-elim"="false" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "no-realign-stack" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
attributes #2 = { "less-precise-fpmad"="false" "no-frame-pointer-elim"="false" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "no-realign-stack" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
attributes #3 = { nounwind readnone }
!llvm.dbg.cu = !{!0}
!llvm.module.flags = !{!36, !37}
!llvm.ident = !{!38}
[PR27284] Reverse the ownership between DICompileUnit and DISubprogram. Currently each Function points to a DISubprogram and DISubprogram has a scope field. For member functions the scope is a DICompositeType. DIScopes point to the DICompileUnit to facilitate type uniquing. Distinct DISubprograms (with isDefinition: true) are not part of the type hierarchy and cannot be uniqued. This change removes the subprograms list from DICompileUnit and instead adds a pointer to the owning compile unit to distinct DISubprograms. This would make it easy for ThinLTO to strip unneeded DISubprograms and their transitively referenced debug info. Motivation ---------- Materializing DISubprograms is currently the most expensive operation when doing a ThinLTO build of clang. We want the DISubprogram to be stored in a separate Bitcode block (or the same block as the function body) so we can avoid having to expensively deserialize all DISubprograms together with the global metadata. If a function has been inlined into another subprogram we need to store a reference the block containing the inlined subprogram. Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script that updates LLVM IR testcases to the new format. http://reviews.llvm.org/D19034 <rdar://problem/25256815> llvm-svn: 266446
2016-04-15 23:57:41 +08:00
!0 = distinct !DICompileUnit(language: DW_LANG_C_plus_plus, producer: "clang version 3.5.0 ", isOptimized: true, emissionKind: FullDebug, file: !1, enums: !2, retainedTypes: !3, globals: !2, imports: !2)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!1 = !DIFile(filename: "<stdin>", directory: "/tmp/dbginfo")
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!2 = !{}
!3 = !{!4, !14}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!4 = !DICompositeType(tag: DW_TAG_structure_type, name: "C", line: 10, size: 64, align: 32, file: !5, elements: !6, identifier: "_ZTS1C")
!5 = !DIFile(filename: "incorrect-variable-debug-loc.cpp", directory: "/tmp/dbginfo")
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!6 = !{!7, !9, !10}
DebugInfo: Remove MDString-based type references Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around DIType*. It is no longer legal to refer to a DICompositeType by its 'identifier:', and DIBuilder no longer retains all types with an 'identifier:' automatically. Aside from the bitcode upgrade, this is mainly removing logic to resolve an MDString-based reference to an actualy DIType. The commits leading up to this have made the implicit type map in DICompileUnit's 'retainedTypes:' field superfluous. This does not remove DITypeRef, DIScopeRef, DINodeRef, and DITypeRefArray, or stop using them in DI-related metadata. Although as of this commit they aren't serving a useful purpose, there are patchces under review to reuse them for CodeView support. The tests in LLVM were updated with deref-typerefs.sh, which is attached to the thread "[RFC] Lazy-loading of debug info metadata": http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html llvm-svn: 267296
2016-04-24 05:08:00 +08:00
!7 = !DIDerivedType(tag: DW_TAG_member, name: "j", line: 12, size: 32, align: 32, file: !5, scope: !4, baseType: !8)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!8 = !DIBasicType(tag: DW_TAG_base_type, name: "int", size: 32, align: 32, encoding: DW_ATE_signed)
DebugInfo: Remove MDString-based type references Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around DIType*. It is no longer legal to refer to a DICompositeType by its 'identifier:', and DIBuilder no longer retains all types with an 'identifier:' automatically. Aside from the bitcode upgrade, this is mainly removing logic to resolve an MDString-based reference to an actualy DIType. The commits leading up to this have made the implicit type map in DICompileUnit's 'retainedTypes:' field superfluous. This does not remove DITypeRef, DIScopeRef, DINodeRef, and DITypeRefArray, or stop using them in DI-related metadata. Although as of this commit they aren't serving a useful purpose, there are patchces under review to reuse them for CodeView support. The tests in LLVM were updated with deref-typerefs.sh, which is attached to the thread "[RFC] Lazy-loading of debug info metadata": http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html llvm-svn: 267296
2016-04-24 05:08:00 +08:00
!9 = !DIDerivedType(tag: DW_TAG_member, name: "b", line: 13, size: 32, align: 32, offset: 32, file: !5, scope: !4, baseType: !14)
!10 = !DISubprogram(name: "m_fn3", linkageName: "_ZN1C5m_fn3Ev", line: 11, isLocal: false, isDefinition: false, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: true, scopeLine: 11, file: !5, scope: !4, type: !11)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!11 = !DISubroutineType(types: !12)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!12 = !{null, !13}
DebugInfo: Remove MDString-based type references Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around DIType*. It is no longer legal to refer to a DICompositeType by its 'identifier:', and DIBuilder no longer retains all types with an 'identifier:' automatically. Aside from the bitcode upgrade, this is mainly removing logic to resolve an MDString-based reference to an actualy DIType. The commits leading up to this have made the implicit type map in DICompileUnit's 'retainedTypes:' field superfluous. This does not remove DITypeRef, DIScopeRef, DINodeRef, and DITypeRefArray, or stop using them in DI-related metadata. Although as of this commit they aren't serving a useful purpose, there are patchces under review to reuse them for CodeView support. The tests in LLVM were updated with deref-typerefs.sh, which is attached to the thread "[RFC] Lazy-loading of debug info metadata": http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html llvm-svn: 267296
2016-04-24 05:08:00 +08:00
!13 = !DIDerivedType(tag: DW_TAG_pointer_type, size: 64, align: 64, flags: DIFlagArtificial | DIFlagObjectPointer, baseType: !4)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!14 = !DICompositeType(tag: DW_TAG_structure_type, name: "B", line: 5, size: 32, align: 32, file: !5, elements: !15, identifier: "_ZTS1B")
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!15 = !{!16, !17}
DebugInfo: Remove MDString-based type references Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around DIType*. It is no longer legal to refer to a DICompositeType by its 'identifier:', and DIBuilder no longer retains all types with an 'identifier:' automatically. Aside from the bitcode upgrade, this is mainly removing logic to resolve an MDString-based reference to an actualy DIType. The commits leading up to this have made the implicit type map in DICompileUnit's 'retainedTypes:' field superfluous. This does not remove DITypeRef, DIScopeRef, DINodeRef, and DITypeRefArray, or stop using them in DI-related metadata. Although as of this commit they aren't serving a useful purpose, there are patchces under review to reuse them for CodeView support. The tests in LLVM were updated with deref-typerefs.sh, which is attached to the thread "[RFC] Lazy-loading of debug info metadata": http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html llvm-svn: 267296
2016-04-24 05:08:00 +08:00
!16 = !DIDerivedType(tag: DW_TAG_member, name: "i", line: 7, size: 32, align: 32, file: !5, scope: !14, baseType: !8)
!17 = !DISubprogram(name: "m_fn2", linkageName: "_ZN1B5m_fn2Ev", line: 6, isLocal: false, isDefinition: false, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: true, scopeLine: 6, file: !5, scope: !14, type: !18)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!18 = !DISubroutineType(types: !19)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!19 = !{null, !20}
DebugInfo: Remove MDString-based type references Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around DIType*. It is no longer legal to refer to a DICompositeType by its 'identifier:', and DIBuilder no longer retains all types with an 'identifier:' automatically. Aside from the bitcode upgrade, this is mainly removing logic to resolve an MDString-based reference to an actualy DIType. The commits leading up to this have made the implicit type map in DICompileUnit's 'retainedTypes:' field superfluous. This does not remove DITypeRef, DIScopeRef, DINodeRef, and DITypeRefArray, or stop using them in DI-related metadata. Although as of this commit they aren't serving a useful purpose, there are patchces under review to reuse them for CodeView support. The tests in LLVM were updated with deref-typerefs.sh, which is attached to the thread "[RFC] Lazy-loading of debug info metadata": http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html llvm-svn: 267296
2016-04-24 05:08:00 +08:00
!20 = !DIDerivedType(tag: DW_TAG_pointer_type, size: 64, align: 64, flags: DIFlagArtificial | DIFlagObjectPointer, baseType: !14)
[PR27284] Reverse the ownership between DICompileUnit and DISubprogram. Currently each Function points to a DISubprogram and DISubprogram has a scope field. For member functions the scope is a DICompositeType. DIScopes point to the DICompileUnit to facilitate type uniquing. Distinct DISubprograms (with isDefinition: true) are not part of the type hierarchy and cannot be uniqued. This change removes the subprograms list from DICompileUnit and instead adds a pointer to the owning compile unit to distinct DISubprograms. This would make it easy for ThinLTO to strip unneeded DISubprograms and their transitively referenced debug info. Motivation ---------- Materializing DISubprograms is currently the most expensive operation when doing a ThinLTO build of clang. We want the DISubprogram to be stored in a separate Bitcode block (or the same block as the function body) so we can avoid having to expensively deserialize all DISubprograms together with the global metadata. If a function has been inlined into another subprogram we need to store a reference the block containing the inlined subprogram. Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script that updates LLVM IR testcases to the new format. http://reviews.llvm.org/D19034 <rdar://problem/25256815> llvm-svn: 266446
2016-04-15 23:57:41 +08:00
!22 = distinct !DISubprogram(name: "fn1", linkageName: "_Z3fn1v", line: 16, isLocal: false, isDefinition: true, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: true, unit: !0, scopeLine: 16, file: !5, scope: !23, type: !24, variables: !26)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!23 = !DIFile(filename: "incorrect-variable-debug-loc.cpp", directory: "/tmp/dbginfo")
!24 = !DISubroutineType(types: !25)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!25 = !{!8}
!26 = !{!27}
DebugInfo: Remove MDString-based type references Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around DIType*. It is no longer legal to refer to a DICompositeType by its 'identifier:', and DIBuilder no longer retains all types with an 'identifier:' automatically. Aside from the bitcode upgrade, this is mainly removing logic to resolve an MDString-based reference to an actualy DIType. The commits leading up to this have made the implicit type map in DICompileUnit's 'retainedTypes:' field superfluous. This does not remove DITypeRef, DIScopeRef, DINodeRef, and DITypeRefArray, or stop using them in DI-related metadata. Although as of this commit they aren't serving a useful purpose, there are patchces under review to reuse them for CodeView support. The tests in LLVM were updated with deref-typerefs.sh, which is attached to the thread "[RFC] Lazy-loading of debug info metadata": http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html llvm-svn: 267296
2016-04-24 05:08:00 +08:00
!27 = !DILocalVariable(name: "A", line: 17, scope: !22, file: !23, type: !4)
!28 = distinct !DISubprogram(name: "m_fn3", linkageName: "_ZN1C5m_fn3Ev", line: 21, isLocal: false, isDefinition: true, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: true, unit: !0, scopeLine: 21, file: !5, scope: !4, type: !11, declaration: !10, variables: !29)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!29 = !{!30}
DI: Remove DW_TAG_arg_variable and DW_TAG_auto_variable Remove the fake `DW_TAG_auto_variable` and `DW_TAG_arg_variable` tags, using `DW_TAG_variable` in their place Stop exposing the `tag:` field at all in the assembly format for `DILocalVariable`. Most of the testcase updates were generated by the following sed script: find test/ -name "*.ll" -o -name "*.mir" | xargs grep -l 'DILocalVariable' | xargs sed -i '' \ -e 's/tag: DW_TAG_arg_variable, //' \ -e 's/tag: DW_TAG_auto_variable, //' There were only a handful of tests in `test/Assembly` that I needed to update by hand. (Note: a follow-up could change `DILocalVariable::DILocalVariable()` to set the tag to `DW_TAG_formal_parameter` instead of `DW_TAG_variable` (as appropriate), instead of having that logic magically in the backend in `DbgVariable`. I've added a FIXME to that effect.) llvm-svn: 243774
2015-08-01 02:58:39 +08:00
!30 = !DILocalVariable(name: "this", arg: 1, flags: DIFlagArtificial | DIFlagObjectPointer, scope: !28, type: !31)
DebugInfo: Remove MDString-based type references Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around DIType*. It is no longer legal to refer to a DICompositeType by its 'identifier:', and DIBuilder no longer retains all types with an 'identifier:' automatically. Aside from the bitcode upgrade, this is mainly removing logic to resolve an MDString-based reference to an actualy DIType. The commits leading up to this have made the implicit type map in DICompileUnit's 'retainedTypes:' field superfluous. This does not remove DITypeRef, DIScopeRef, DINodeRef, and DITypeRefArray, or stop using them in DI-related metadata. Although as of this commit they aren't serving a useful purpose, there are patchces under review to reuse them for CodeView support. The tests in LLVM were updated with deref-typerefs.sh, which is attached to the thread "[RFC] Lazy-loading of debug info metadata": http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html llvm-svn: 267296
2016-04-24 05:08:00 +08:00
!31 = !DIDerivedType(tag: DW_TAG_pointer_type, size: 64, align: 64, baseType: !4)
!32 = distinct !DISubprogram(name: "m_fn2", linkageName: "_ZN1B5m_fn2Ev", line: 6, isLocal: false, isDefinition: true, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: true, unit: !0, scopeLine: 6, file: !5, scope: !14, type: !18, declaration: !17, variables: !33)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!33 = !{!34}
DI: Remove DW_TAG_arg_variable and DW_TAG_auto_variable Remove the fake `DW_TAG_auto_variable` and `DW_TAG_arg_variable` tags, using `DW_TAG_variable` in their place Stop exposing the `tag:` field at all in the assembly format for `DILocalVariable`. Most of the testcase updates were generated by the following sed script: find test/ -name "*.ll" -o -name "*.mir" | xargs grep -l 'DILocalVariable' | xargs sed -i '' \ -e 's/tag: DW_TAG_arg_variable, //' \ -e 's/tag: DW_TAG_auto_variable, //' There were only a handful of tests in `test/Assembly` that I needed to update by hand. (Note: a follow-up could change `DILocalVariable::DILocalVariable()` to set the tag to `DW_TAG_formal_parameter` instead of `DW_TAG_variable` (as appropriate), instead of having that logic magically in the backend in `DbgVariable`. I've added a FIXME to that effect.) llvm-svn: 243774
2015-08-01 02:58:39 +08:00
!34 = !DILocalVariable(name: "this", arg: 1, flags: DIFlagArtificial | DIFlagObjectPointer, scope: !32, type: !35)
DebugInfo: Remove MDString-based type references Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around DIType*. It is no longer legal to refer to a DICompositeType by its 'identifier:', and DIBuilder no longer retains all types with an 'identifier:' automatically. Aside from the bitcode upgrade, this is mainly removing logic to resolve an MDString-based reference to an actualy DIType. The commits leading up to this have made the implicit type map in DICompileUnit's 'retainedTypes:' field superfluous. This does not remove DITypeRef, DIScopeRef, DINodeRef, and DITypeRefArray, or stop using them in DI-related metadata. Although as of this commit they aren't serving a useful purpose, there are patchces under review to reuse them for CodeView support. The tests in LLVM were updated with deref-typerefs.sh, which is attached to the thread "[RFC] Lazy-loading of debug info metadata": http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html llvm-svn: 267296
2016-04-24 05:08:00 +08:00
!35 = !DIDerivedType(tag: DW_TAG_pointer_type, size: 64, align: 64, baseType: !14)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!36 = !{i32 2, !"Dwarf Version", i32 4}
DebugInfo: Move new hierarchy into place Move the specialized metadata nodes for the new debug info hierarchy into place, finishing off PR22464. I've done bootstraps (and all that) and I'm confident this commit is NFC as far as DWARF output is concerned. Let me know if I'm wrong :). The code changes are fairly mechanical: - Bumped the "Debug Info Version". - `DIBuilder` now creates the appropriate subclass of `MDNode`. - Subclasses of DIDescriptor now expect to hold their "MD" counterparts (e.g., `DIBasicType` expects `MDBasicType`). - Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp` for printing comments. - Big update to LangRef to describe the nodes in the new hierarchy. Feel free to make it better. Testcase changes are enormous. There's an accompanying clang commit on its way. If you have out-of-tree debug info testcases, I just broke your build. - `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to update all the IR testcases. - Unfortunately I failed to find way to script the updates to CHECK lines, so I updated all of these by hand. This was fairly painful, since the old CHECKs are difficult to reason about. That's one of the benefits of the new hierarchy. This work isn't quite finished, BTW. The `DIDescriptor` subclasses are almost empty wrappers, but not quite: they still have loose casting checks (see the `RETURN_FROM_RAW()` macro). Once they're completely gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I also expect to make a few schema changes now that it's easier to reason about everything. llvm-svn: 231082
2015-03-04 01:24:31 +08:00
!37 = !{i32 2, !"Debug Info Version", i32 3}
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!38 = !{!"clang version 3.5.0 "}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!39 = !DILocation(line: 6, scope: !32, inlinedAt: !40)
!40 = !DILocation(line: 18, scope: !22)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!41 = !{!42, !43, i64 0}
[TBAAVerifier] Be stricter around verifying scalar nodes This fixes the issue exposed in PR31393, where we weren't trying sufficiently hard to diagnose bad TBAA metadata. This does reduce the variety in the error messages we print out, but I think the tradeoff of verifying more, simply and quickly overrules the need for more helpful error messags here. llvm-svn: 290713
2016-12-29 23:47:05 +08:00
!42 = !{!"struct", !43, i64 0}
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!43 = !{!"int", !44, i64 0}
!44 = !{!"omnipotent char", !45, i64 0}
!45 = !{!"Simple C/C++ TBAA"}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!46 = !DILocation(line: 17, scope: !22)
!47 = !DILocation(line: 19, scope: !22)
!48 = !DILocation(line: 0, scope: !28)
!49 = !DILocation(line: 22, scope: !28)
!50 = !DILocation(line: 6, scope: !32, inlinedAt: !51)
!51 = !DILocation(line: 23, scope: !28)
!52 = !DILocation(line: 24, scope: !28)