maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/DebugInfo/X86/fission-inline.ll

124 lines
5.7 KiB
LLVM
Raw Normal View History

DebugInfo: Use low_pc relative debug_ranges under fission when the CU has a low_pc Seems we were setting the base address on the wrong DwarfCompileUnit object so it wasn't being used when generating the ranges. llvm-svn: 236377
2015-05-02 10:31:49 +08:00
; RUN: llc -split-dwarf=Enable -O0 < %s -mtriple=x86_64-unknown-linux-gnu -filetype=obj > %t
; RUN: llvm-dwarfdump -debug-dump=info %t | FileCheck %s
; RUN: llvm-objdump -r %t | FileCheck --check-prefix=RELOCS %s
Provide gmlt-like inline scope information in the skeleton CU to facilitate symbolication without needing the .dwo files Clang -gsplit-dwarf self-host -O0, binary increases by 0.0005%, -O2, binary increases by 25%. A large binary inside Google, split-dwarf, -O0, and other internal flags (GDB index, etc) increases by 1.8%, optimized build is 35%. The size impact may be somewhat greater in .o files (I haven't measured that much - since the linked executable -O0 numbers seemed low enough) due to relocations. These relocations could be removed if we taught the llvm-symbolizer to handle indexed addressing in the .o file (GDB can't cope with this just yet, but GDB won't be reading this info anyway). Also debug_ranges could be shared between .o and .dwo, though ideally debug_ranges would get a schema that could used index(+offset) addressing, and move to the .dwo file, then we'd be back to sharing addresses in the address pool again. But for now, these sizes seem small enough to go ahead with this. Verified that no other DW_TAGs are produced into the .o file other than subprograms and inlined_subroutines. llvm-svn: 221306
2014-11-05 06:12:25 +08:00
; Test the emission of gmlt-like inlining information into the skeleton unit.
; This allows inline-aware symbolication/backtracing given only the linked
; executable, without needing access to the .dwos.
; A simple example of inlining generated with clang -gsplit-dwarf
; A member function is used to force emission of the declaration of the
; function into the .dwo file, which may be shared with other CUs in the dwo ;
; under fission, but should not be shared with the skeleton's CU. This also
; tests the general case of context emission, which is suppressed in gmlt-like
; data.
; Include a template just to test template parameters are not emitted in
; gmlt-like data.
; And some varargs to make sure DW_TAG_unspecified_parameters is not emitted.
; And a using declaration in a nested lexical_block... because that shouldn't
; be emitted either.
; Minor complication: after generating the LLVM IR, it was manually edited so
; that the 'f1()' call from f3 was reordered to appear between the two inlined
; f1 calls from f2. This causes f2's inlined_subroutine to use DW_AT_ranges,
; thus exercising range list generation/referencing which was buggy.
; struct foo {
; template<typename T>
; static void f2();
; static void f3(...);
; };
;
; void f1();
;
; template<typename T>
; inline __attribute__((always_inline)) void foo::f2() {
; f1();
; f1();
; }
;
; void foo::f3(...) {
; if (true) {
; f1();
; f2<int>();
; using ::foo;
; }
; }
; Check that we emit the usual gmlt-like data for this file, including brief
; descriptions of subprograms with inlined scopes.
; FIXME: Once tools support indexed addresses in the skeleton CU, we should use
; those (DW_FORM_addr would become DW_FORM_GNU_addr_index below) since those
; addresses will already be in the address pool anyway.
; CHECK: DW_TAG_subprogram
; CHECK-NEXT: DW_AT_name {{.*}} "f2<int>"
; CHECK-NOT: DW_
; CHECK: DW_TAG_subprogram
; CHECK-NEXT: DW_AT_low_pc [DW_FORM_addr]
; CHECK-NEXT: DW_AT_high_pc
; CHECK-NEXT: DW_AT_name {{.*}} "f3"
; CHECK-NOT: {{DW_|NULL}}
; CHECK: DW_TAG_inlined_subroutine
; CHECK-NEXT: DW_AT_abstract_origin {{.*}} "f2<int>"
; CHECK-NEXT: DW_AT_ranges
DebugInfo: Use low_pc relative debug_ranges under fission when the CU has a low_pc Seems we were setting the base address on the wrong DwarfCompileUnit object so it wasn't being used when generating the ranges. llvm-svn: 236377
2015-05-02 10:31:49 +08:00
; CHECK-NOT: {{DW_AT|DW_TAG|NULL}}
; CHECK: DW_AT_call_file
Provide gmlt-like inline scope information in the skeleton CU to facilitate symbolication without needing the .dwo files Clang -gsplit-dwarf self-host -O0, binary increases by 0.0005%, -O2, binary increases by 25%. A large binary inside Google, split-dwarf, -O0, and other internal flags (GDB index, etc) increases by 1.8%, optimized build is 35%. The size impact may be somewhat greater in .o files (I haven't measured that much - since the linked executable -O0 numbers seemed low enough) due to relocations. These relocations could be removed if we taught the llvm-symbolizer to handle indexed addressing in the .o file (GDB can't cope with this just yet, but GDB won't be reading this info anyway). Also debug_ranges could be shared between .o and .dwo, though ideally debug_ranges would get a schema that could used index(+offset) addressing, and move to the .dwo file, then we'd be back to sharing addresses in the address pool again. But for now, these sizes seem small enough to go ahead with this. Verified that no other DW_TAGs are produced into the .o file other than subprograms and inlined_subroutines. llvm-svn: 221306
2014-11-05 06:12:25 +08:00
; CHECK-NEXT: DW_AT_call_line {{.*}} (18)
; CHECK-NOT: DW_
DebugInfo: Use low_pc relative debug_ranges under fission when the CU has a low_pc Seems we were setting the base address on the wrong DwarfCompileUnit object so it wasn't being used when generating the ranges. llvm-svn: 236377
2015-05-02 10:31:49 +08:00
; RELOCS-NOT: RELOCATION RECORDS FOR [.rela.debug_ranges]
Provide gmlt-like inline scope information in the skeleton CU to facilitate symbolication without needing the .dwo files Clang -gsplit-dwarf self-host -O0, binary increases by 0.0005%, -O2, binary increases by 25%. A large binary inside Google, split-dwarf, -O0, and other internal flags (GDB index, etc) increases by 1.8%, optimized build is 35%. The size impact may be somewhat greater in .o files (I haven't measured that much - since the linked executable -O0 numbers seemed low enough) due to relocations. These relocations could be removed if we taught the llvm-symbolizer to handle indexed addressing in the .o file (GDB can't cope with this just yet, but GDB won't be reading this info anyway). Also debug_ranges could be shared between .o and .dwo, though ideally debug_ranges would get a schema that could used index(+offset) addressing, and move to the .dwo file, then we'd be back to sharing addresses in the address pool again. But for now, these sizes seem small enough to go ahead with this. Verified that no other DW_TAGs are produced into the .o file other than subprograms and inlined_subroutines. llvm-svn: 221306
2014-11-05 06:12:25 +08:00
; Function Attrs: uwtable
DI: Reverse direction of subprogram -> function edge. Previously, subprograms contained a metadata reference to the function they described. Because most clients need to get or set a subprogram for a given function rather than the other way around, this created unneeded inefficiency. For example, many passes needed to call the function llvm::makeSubprogramMap() to build a mapping from functions to subprograms, and the IR linker needed to fix up function references in a way that caused quadratic complexity in the IR linking phase of LTO. This change reverses the direction of the edge by storing the subprogram as function-level metadata and removing DISubprogram's function field. Since this is an IR change, a bitcode upgrade has been provided. Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is attached to the PR. Differential Revision: http://reviews.llvm.org/D14265 llvm-svn: 252219
2015-11-06 06:03:56 +08:00
define void @_ZN3foo2f3Ez(...) #0 align 2 !dbg !10 {
Provide gmlt-like inline scope information in the skeleton CU to facilitate symbolication without needing the .dwo files Clang -gsplit-dwarf self-host -O0, binary increases by 0.0005%, -O2, binary increases by 25%. A large binary inside Google, split-dwarf, -O0, and other internal flags (GDB index, etc) increases by 1.8%, optimized build is 35%. The size impact may be somewhat greater in .o files (I haven't measured that much - since the linked executable -O0 numbers seemed low enough) due to relocations. These relocations could be removed if we taught the llvm-symbolizer to handle indexed addressing in the .o file (GDB can't cope with this just yet, but GDB won't be reading this info anyway). Also debug_ranges could be shared between .o and .dwo, though ideally debug_ranges would get a schema that could used index(+offset) addressing, and move to the .dwo file, then we'd be back to sharing addresses in the address pool again. But for now, these sizes seem small enough to go ahead with this. Verified that no other DW_TAGs are produced into the .o file other than subprograms and inlined_subroutines. llvm-svn: 221306
2014-11-05 06:12:25 +08:00
entry:
call void @_Z2f1v(), !dbg !26
call void @_Z2f1v(), !dbg !25
call void @_Z2f1v(), !dbg !28
ret void, !dbg !29
}
declare void @_Z2f1v() #1
attributes #0 = { uwtable "less-precise-fpmad"="false" "no-frame-pointer-elim"="true" "no-frame-pointer-elim-non-leaf" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
attributes #1 = { "less-precise-fpmad"="false" "no-frame-pointer-elim"="true" "no-frame-pointer-elim-non-leaf" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
!llvm.dbg.cu = !{!0}
!llvm.module.flags = !{!22, !23}
!llvm.ident = !{!24}
[PR27284] Reverse the ownership between DICompileUnit and DISubprogram. Currently each Function points to a DISubprogram and DISubprogram has a scope field. For member functions the scope is a DICompositeType. DIScopes point to the DICompileUnit to facilitate type uniquing. Distinct DISubprograms (with isDefinition: true) are not part of the type hierarchy and cannot be uniqued. This change removes the subprograms list from DICompileUnit and instead adds a pointer to the owning compile unit to distinct DISubprograms. This would make it easy for ThinLTO to strip unneeded DISubprograms and their transitively referenced debug info. Motivation ---------- Materializing DISubprograms is currently the most expensive operation when doing a ThinLTO build of clang. We want the DISubprogram to be stored in a separate Bitcode block (or the same block as the function body) so we can avoid having to expensively deserialize all DISubprograms together with the global metadata. If a function has been inlined into another subprogram we need to store a reference the block containing the inlined subprogram. Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script that updates LLVM IR testcases to the new format. http://reviews.llvm.org/D19034 <rdar://problem/25256815> llvm-svn: 266446
2016-04-15 23:57:41 +08:00
!0 = distinct !DICompileUnit(language: DW_LANG_C_plus_plus, producer: "clang version 3.6.0 ", isOptimized: false, splitDebugFilename: "fission-inline.dwo", emissionKind: FullDebug, file: !1, enums: !2, retainedTypes: !3, globals: !2, imports: !18)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!1 = !DIFile(filename: "fission-inline.cpp", directory: "/tmp/dbginfo")
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!2 = !{}
!3 = !{!4}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!4 = !DICompositeType(tag: DW_TAG_structure_type, name: "foo", line: 1, size: 8, align: 8, file: !1, elements: !5, identifier: "_ZTS3foo")
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!5 = !{!6}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!6 = !DISubprogram(name: "f3", linkageName: "_ZN3foo2f3Ez", line: 4, isLocal: false, isDefinition: false, flags: DIFlagPrototyped, isOptimized: false, scopeLine: 4, file: !1, scope: !"_ZTS3foo", type: !7)
!7 = !DISubroutineType(types: !8)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!8 = !{null, null}
[PR27284] Reverse the ownership between DICompileUnit and DISubprogram. Currently each Function points to a DISubprogram and DISubprogram has a scope field. For member functions the scope is a DICompositeType. DIScopes point to the DICompileUnit to facilitate type uniquing. Distinct DISubprograms (with isDefinition: true) are not part of the type hierarchy and cannot be uniqued. This change removes the subprograms list from DICompileUnit and instead adds a pointer to the owning compile unit to distinct DISubprograms. This would make it easy for ThinLTO to strip unneeded DISubprograms and their transitively referenced debug info. Motivation ---------- Materializing DISubprograms is currently the most expensive operation when doing a ThinLTO build of clang. We want the DISubprogram to be stored in a separate Bitcode block (or the same block as the function body) so we can avoid having to expensively deserialize all DISubprograms together with the global metadata. If a function has been inlined into another subprogram we need to store a reference the block containing the inlined subprogram. Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script that updates LLVM IR testcases to the new format. http://reviews.llvm.org/D19034 <rdar://problem/25256815> llvm-svn: 266446
2016-04-15 23:57:41 +08:00
!10 = distinct !DISubprogram(name: "f3", linkageName: "_ZN3foo2f3Ez", line: 15, isLocal: false, isDefinition: true, flags: DIFlagPrototyped, isOptimized: false, unit: !0, scopeLine: 15, file: !1, scope: !"_ZTS3foo", type: !7, declaration: !6, variables: !2)
!11 = distinct !DISubprogram(name: "f2<int>", linkageName: "_ZN3foo2f2IiEEvv", line: 10, isLocal: false, isDefinition: true, flags: DIFlagPrototyped, isOptimized: false, unit: !0, scopeLine: 10, file: !1, scope: !"_ZTS3foo", type: !12, templateParams: !14, declaration: !17, variables: !2)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!12 = !DISubroutineType(types: !13)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!13 = !{null}
!14 = !{!15}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!15 = !DITemplateTypeParameter(name: "T", type: !16)
!16 = !DIBasicType(tag: DW_TAG_base_type, name: "int", size: 32, align: 32, encoding: DW_ATE_signed)
!17 = !DISubprogram(name: "f2<int>", linkageName: "_ZN3foo2f2IiEEvv", line: 10, isLocal: false, isDefinition: false, flags: DIFlagPrototyped, isOptimized: false, scopeLine: 10, file: !1, scope: !"_ZTS3foo", type: !12, templateParams: !14)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!18 = !{!19}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!19 = !DIImportedEntity(tag: DW_TAG_imported_declaration, line: 19, scope: !20, entity: !"_ZTS3foo")
!20 = distinct !DILexicalBlock(line: 16, column: 13, file: !1, scope: !21)
!21 = distinct !DILexicalBlock(line: 16, column: 7, file: !1, scope: !10)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!22 = !{i32 2, !"Dwarf Version", i32 4}
DebugInfo: Move new hierarchy into place Move the specialized metadata nodes for the new debug info hierarchy into place, finishing off PR22464. I've done bootstraps (and all that) and I'm confident this commit is NFC as far as DWARF output is concerned. Let me know if I'm wrong :). The code changes are fairly mechanical: - Bumped the "Debug Info Version". - `DIBuilder` now creates the appropriate subclass of `MDNode`. - Subclasses of DIDescriptor now expect to hold their "MD" counterparts (e.g., `DIBasicType` expects `MDBasicType`). - Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp` for printing comments. - Big update to LangRef to describe the nodes in the new hierarchy. Feel free to make it better. Testcase changes are enormous. There's an accompanying clang commit on its way. If you have out-of-tree debug info testcases, I just broke your build. - `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to update all the IR testcases. - Unfortunately I failed to find way to script the updates to CHECK lines, so I updated all of these by hand. This was fairly painful, since the old CHECKs are difficult to reason about. That's one of the benefits of the new hierarchy. This work isn't quite finished, BTW. The `DIDescriptor` subclasses are almost empty wrappers, but not quite: they still have loose casting checks (see the `RETURN_FROM_RAW()` macro). Once they're completely gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I also expect to make a few schema changes now that it's easier to reason about everything. llvm-svn: 231082
2015-03-04 01:24:31 +08:00
!23 = !{i32 2, !"Debug Info Version", i32 3}
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!24 = !{!"clang version 3.6.0 "}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!25 = !DILocation(line: 17, column: 5, scope: !20)
!26 = !DILocation(line: 11, column: 3, scope: !11, inlinedAt: !27)
!27 = !DILocation(line: 18, column: 5, scope: !20)
!28 = !DILocation(line: 12, column: 3, scope: !11, inlinedAt: !27)
!29 = !DILocation(line: 21, column: 1, scope: !10)