llvm-project/llvm/test/CodeGen/AMDGPU/rsq.ll

75 lines
3.0 KiB
LLVM
Raw Normal View History

; RUN: llc -march=amdgcn -mattr=-fp32-denormals -verify-machineinstrs -enable-unsafe-fp-math < %s | FileCheck -check-prefix=SI-UNSAFE -check-prefix=SI %s
; RUN: llc -march=amdgcn -mattr=-fp32-denormals -verify-machineinstrs < %s | FileCheck -check-prefix=SI-SAFE -check-prefix=SI %s
declare i32 @llvm.amdgcn.workitem.id.x() nounwind readnone
declare float @llvm.sqrt.f32(float) nounwind readnone
declare double @llvm.sqrt.f64(double) nounwind readnone
; SI-LABEL: {{^}}rsq_f32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td llvm-svn: 221350
2014-11-05 22:50:53 +08:00
; SI: v_rsq_f32_e32
; SI: s_endpgm
define void @rsq_f32(float addrspace(1)* noalias %out, float addrspace(1)* noalias %in) nounwind {
%val = load float, float addrspace(1)* %in, align 4
%sqrt = call float @llvm.sqrt.f32(float %val) nounwind readnone
%div = fdiv float 1.0, %sqrt
store float %div, float addrspace(1)* %out, align 4
ret void
}
; SI-LABEL: {{^}}rsq_f64:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td llvm-svn: 221350
2014-11-05 22:50:53 +08:00
; SI-UNSAFE: v_rsq_f64_e32
; SI-SAFE: v_sqrt_f64_e32
; SI: s_endpgm
define void @rsq_f64(double addrspace(1)* noalias %out, double addrspace(1)* noalias %in) nounwind {
%val = load double, double addrspace(1)* %in, align 4
%sqrt = call double @llvm.sqrt.f64(double %val) nounwind readnone
%div = fdiv double 1.0, %sqrt
store double %div, double addrspace(1)* %out, align 4
ret void
}
; SI-LABEL: {{^}}rsq_f32_sgpr:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td llvm-svn: 221350
2014-11-05 22:50:53 +08:00
; SI: v_rsq_f32_e32 {{v[0-9]+}}, {{s[0-9]+}}
; SI: s_endpgm
define void @rsq_f32_sgpr(float addrspace(1)* noalias %out, float %val) nounwind {
%sqrt = call float @llvm.sqrt.f32(float %val) nounwind readnone
%div = fdiv float 1.0, %sqrt
store float %div, float addrspace(1)* %out, align 4
ret void
}
; Recognize that this is rsqrt(a) * rcp(b) * c,
; not 1 / ( 1 / sqrt(a)) * rcp(b) * c.
; SI-LABEL: @rsqrt_fmul
; SI-DAG: buffer_load_dword [[A:v[0-9]+]], {{v\[[0-9]+:[0-9]+\]}}, {{s\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_load_dword [[B:v[0-9]+]], {{v\[[0-9]+:[0-9]+\]}}, {{s\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:4
; SI-DAG: buffer_load_dword [[C:v[0-9]+]], {{v\[[0-9]+:[0-9]+\]}}, {{s\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8
; SI-UNSAFE-DAG: v_rsq_f32_e32 [[RSQA:v[0-9]+]], [[A]]
; SI-UNSAFE-DAG: v_rcp_f32_e32 [[RCPB:v[0-9]+]], [[B]]
; SI-UNSAFE-DAG: v_mul_f32_e32 [[TMP:v[0-9]+]], [[RCPB]], [[RSQA]]
; SI-UNSAFE: v_mul_f32_e32 [[RESULT:v[0-9]+]], [[TMP]], [[C]]
; SI-UNSAFE: buffer_store_dword [[RESULT]]
; SI-SAFE-NOT: v_rsq_f32
; SI: s_endpgm
define void @rsqrt_fmul(float addrspace(1)* %out, float addrspace(1)* %in) {
%tid = call i32 @llvm.amdgcn.workitem.id.x() nounwind readnone
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%out.gep = getelementptr float, float addrspace(1)* %out, i32 %tid
%gep.0 = getelementptr float, float addrspace(1)* %in, i32 %tid
%gep.1 = getelementptr float, float addrspace(1)* %gep.0, i32 1
%gep.2 = getelementptr float, float addrspace(1)* %gep.0, i32 2
%a = load volatile float, float addrspace(1)* %gep.0
%b = load volatile float, float addrspace(1)* %gep.1
%c = load volatile float, float addrspace(1)* %gep.2
%x = call float @llvm.sqrt.f32(float %a)
%y = fmul float %x, %b
%z = fdiv float %c, %y
store float %z, float addrspace(1)* %out.gep
ret void
}