maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/AMDGPU/GlobalISel/inst-select-anyext.mir

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

218 lines
5.3 KiB
Plaintext
Raw Normal View History

AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
# NOTE: Assertions have been autogenerated by utils/update_mir_test_checks.py
AMDGPU/GlobalISel: Don't assume instruction can be erased when selecting exts The G_ANYEXT handling can end up reaching selectCOPY, which mutates the instruction in place. llvm-svn: 366915
2019-07-25 00:05:53 +08:00
# RUN: llc -march=amdgcn -run-pass=instruction-select -verify-machineinstrs %s -o - | FileCheck %s -check-prefixes=GCN
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
# RUN: llc -march=amdgcn -mcpu=gfx1010 -run-pass=instruction-select -verify-machineinstrs %s -o - | FileCheck %s -check-prefixes=GCN
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
---
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
name: anyext_sgpr_s16_to_sgpr_s32
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
legalized: true
regBankSelected: true
body: |
bb.0:
liveins: $sgpr0
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
; GCN-LABEL: name: anyext_sgpr_s16_to_sgpr_s32
AMDGPU: Relax 32-bit SGPR register class Mostly use SReg_32 instead of SReg_32_XM0 for arbitrary values. This will allow the register coalescer to do a better job eliminating copies to m0. For GlobalISel, as a terrible hack, use SGPR_32 for things that should use SCC until booleans are solved. llvm-svn: 375267
2019-10-19 02:26:37 +08:00
; GCN: [[COPY:%[0-9]+]]:sreg_32 = COPY $sgpr0
AMDGPU/GlobalISel: Don't assume instruction can be erased when selecting exts The G_ANYEXT handling can end up reaching selectCOPY, which mutates the instruction in place. llvm-svn: 366915
2019-07-25 00:05:53 +08:00
; GCN: $sgpr0 = COPY [[COPY]]
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
%0:sgpr(s32) = COPY $sgpr0
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
%1:sgpr(s16) = G_TRUNC %0
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
%2:sgpr(s32) = G_ANYEXT %1
$sgpr0 = COPY %2
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
...
---
AMDGPU/GlobalISel: Fix selecting broken copies for s32->s64 anyext These should probably not be legal in the first place, but that might also be a pain.
2020-07-23 09:07:03 +08:00
name: anyext_sgpr_s32_to_sgpr_s64
legalized: true
regBankSelected: true
tracksRegLiveness: true
body: |
bb.0:
liveins: $sgpr0
; GCN-LABEL: name: anyext_sgpr_s32_to_sgpr_s64
; GCN: liveins: $sgpr0
; GCN: [[COPY:%[0-9]+]]:sreg_32 = COPY $sgpr0
; GCN: [[DEF:%[0-9]+]]:sreg_32 = IMPLICIT_DEF
; GCN: [[REG_SEQUENCE:%[0-9]+]]:sreg_64 = REG_SEQUENCE [[COPY]], %subreg.sub0, [[DEF]], %subreg.sub1
; GCN: S_ENDPGM 0, implicit [[REG_SEQUENCE]]
%0:sgpr(s32) = COPY $sgpr0
%1:sgpr(s64) = G_ANYEXT %0
S_ENDPGM 0, implicit %1
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
AMDGPU/GlobalISel: Fix selecting broken copies for s32->s64 anyext These should probably not be legal in the first place, but that might also be a pain.
2020-07-23 09:07:03 +08:00
...
---
name: anyext_sgpr_s16_to_sgpr_s64
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
legalized: true
regBankSelected: true
AMDGPU/GlobalISel: Fix selecting broken copies for s32->s64 anyext These should probably not be legal in the first place, but that might also be a pain.
2020-07-23 09:07:03 +08:00
tracksRegLiveness: true
body: |
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
bb.0:
liveins: $sgpr0
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
; GCN-LABEL: name: anyext_sgpr_s16_to_sgpr_s64
AMDGPU/GlobalISel: Fix selecting broken copies for s32->s64 anyext These should probably not be legal in the first place, but that might also be a pain.
2020-07-23 09:07:03 +08:00
; GCN: liveins: $sgpr0
AMDGPU: Relax 32-bit SGPR register class Mostly use SReg_32 instead of SReg_32_XM0 for arbitrary values. This will allow the register coalescer to do a better job eliminating copies to m0. For GlobalISel, as a terrible hack, use SGPR_32 for things that should use SCC until booleans are solved. llvm-svn: 375267
2019-10-19 02:26:37 +08:00
; GCN: [[COPY:%[0-9]+]]:sreg_32 = COPY $sgpr0
AMDGPU/GlobalISel: Fix selecting broken copies for s32->s64 anyext These should probably not be legal in the first place, but that might also be a pain.
2020-07-23 09:07:03 +08:00
; GCN: [[DEF:%[0-9]+]]:sreg_32 = IMPLICIT_DEF
; GCN: [[REG_SEQUENCE:%[0-9]+]]:sreg_64 = REG_SEQUENCE [[COPY]], %subreg.sub0, [[DEF]], %subreg.sub1
; GCN: S_ENDPGM 0, implicit [[REG_SEQUENCE]]
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
%0:sgpr(s32) = COPY $sgpr0
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
%1:sgpr(s16) = G_TRUNC %0
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
%2:sgpr(s64) = G_ANYEXT %1
AMDGPU/GlobalISel: Fix selecting broken copies for s32->s64 anyext These should probably not be legal in the first place, but that might also be a pain.
2020-07-23 09:07:03 +08:00
S_ENDPGM 0, implicit %2
...
---
name: anyext_vgpr_s32_to_vgpr_s64
legalized: true
regBankSelected: true
tracksRegLiveness: true
body: |
bb.0:
liveins: $vgpr0
; GCN-LABEL: name: anyext_vgpr_s32_to_vgpr_s64
; GCN: liveins: $vgpr0
; GCN: [[COPY:%[0-9]+]]:vgpr_32 = COPY $vgpr0
; GCN: [[DEF:%[0-9]+]]:vgpr_32 = IMPLICIT_DEF
; GCN: [[REG_SEQUENCE:%[0-9]+]]:vreg_64 = REG_SEQUENCE [[COPY]], %subreg.sub0, [[DEF]], %subreg.sub1
; GCN: S_ENDPGM 0, implicit [[REG_SEQUENCE]]
%0:vgpr(s32) = COPY $vgpr0
%1:vgpr(s64) = G_ANYEXT %0
S_ENDPGM 0, implicit %1
...
---
name: anyext_vgpr_s16_to_vgpr_s64
legalized: true
regBankSelected: true
tracksRegLiveness: true
body: |
bb.0:
liveins: $vgpr0
; GCN-LABEL: name: anyext_vgpr_s16_to_vgpr_s64
; GCN: liveins: $vgpr0
; GCN: [[COPY:%[0-9]+]]:vgpr_32 = COPY $vgpr0
; GCN: [[DEF:%[0-9]+]]:vgpr_32 = IMPLICIT_DEF
; GCN: [[REG_SEQUENCE:%[0-9]+]]:vreg_64 = REG_SEQUENCE [[COPY]], %subreg.sub0, [[DEF]], %subreg.sub1
; GCN: S_ENDPGM 0, implicit [[REG_SEQUENCE]]
%0:vgpr(s32) = COPY $vgpr0
%1:vgpr(s16) = G_TRUNC %0
%2:vgpr(s64) = G_ANYEXT %1
S_ENDPGM 0, implicit %2
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
...
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
# vcc is an invalid extension source
# ---
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
# name: anyext_vcc_s1_to_vgpr_s32
# legalized: true
# regBankSelected: true
# body: |
# bb.0:
# liveins: $vgpr0
AMDGPU/GlobalISel: Use and instead of BFE with inline immediate Zext from s1 is the only case where this should do anything with the current legal extensions. llvm-svn: 364760
2019-07-01 21:22:06 +08:00
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
# %0:vgpr(s32) = COPY $vgpr0
# %1:vcc(s1) = G_ICMP intpred(eq), %0, %0
# %2:vgpr(s32) = G_ANYEXT %1
# $vgpr0 = COPY %2
# ...
AMDGPU/GlobalISel: Use and instead of BFE with inline immediate Zext from s1 is the only case where this should do anything with the current legal extensions. llvm-svn: 364760
2019-07-01 21:22:06 +08:00
---
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
name: anyext_sgpr_s1_to_sgpr_s32
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
legalized: true
regBankSelected: true
body: |
bb.0:
liveins: $sgpr0
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
; GCN-LABEL: name: anyext_sgpr_s1_to_sgpr_s32
AMDGPU: Relax 32-bit SGPR register class Mostly use SReg_32 instead of SReg_32_XM0 for arbitrary values. This will allow the register coalescer to do a better job eliminating copies to m0. For GlobalISel, as a terrible hack, use SGPR_32 for things that should use SCC until booleans are solved. llvm-svn: 375267
2019-10-19 02:26:37 +08:00
; GCN: [[COPY:%[0-9]+]]:sreg_32 = COPY $sgpr0
AMDGPU/GlobalISel: Don't assume instruction can be erased when selecting exts The G_ANYEXT handling can end up reaching selectCOPY, which mutates the instruction in place. llvm-svn: 366915
2019-07-25 00:05:53 +08:00
; GCN: $sgpr0 = COPY [[COPY]]
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
%0:sgpr(s32) = COPY $sgpr0
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
%1:sgpr(s1) = G_TRUNC %0
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
%2:sgpr(s32) = G_ANYEXT %1
$sgpr0 = COPY %2
...
---
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
name: anyext_vgpr_s1_to_vgpr_s32
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
legalized: true
regBankSelected: true
body: |
bb.0:
liveins: $vgpr0
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
; GCN-LABEL: name: anyext_vgpr_s1_to_vgpr_s32
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
; GCN: [[COPY:%[0-9]+]]:vgpr_32 = COPY $vgpr0
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
; GCN: $vgpr0 = COPY [[COPY]]
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
%0:vgpr(s32) = COPY $vgpr0
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
%1:vgpr(s1) = G_TRUNC %0
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
%2:vgpr(s32) = G_ANYEXT %1
$vgpr0 = COPY %2
...
---
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
name: anyext_sgpr_s1_to_vgpr_s32
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
legalized: true
regBankSelected: true
body: |
bb.0:
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
liveins: $sgpr0
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
; GCN-LABEL: name: anyext_sgpr_s1_to_vgpr_s32
; GCN: [[COPY:%[0-9]+]]:sreg_32 = COPY $sgpr0
; GCN: $sgpr0 = COPY [[COPY]]
%0:sgpr(s32) = COPY $sgpr0
%1:sgpr(s1) = G_TRUNC %0
%2:sgpr(s32) = G_ANYEXT %1
$sgpr0 = COPY %2
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
...
---
name: anyext_vgpr_s16_to_vgpr_s32
legalized: true
regBankSelected: true
body: |
bb.0:
liveins: $vgpr0
; GCN-LABEL: name: anyext_vgpr_s16_to_vgpr_s32
AMDGPU/GlobalISel: Don't assume instruction can be erased when selecting exts The G_ANYEXT handling can end up reaching selectCOPY, which mutates the instruction in place. llvm-svn: 366915
2019-07-25 00:05:53 +08:00
; GCN: [[COPY:%[0-9]+]]:vgpr_32 = COPY $vgpr0
; GCN: $vgpr0 = COPY [[COPY]]
AMDGPU: Select G_SEXT/G_ZEXT/G_ANYEXT llvm-svn: 364308
2019-06-25 21:18:11 +08:00
%0:vgpr(s32) = COPY $vgpr0
%1:vgpr(s16) = G_TRUNC %0
%2:vgpr(s32) = G_ANYEXT %1
$vgpr0 = COPY %2
...
AMDGPU/GlobalISel: Replace handling of boolean values This solves selection failures with generated selection patterns, which would fail due to inferring the SGPR reg bank for virtual registers with a set register class instead of VCC bank. Use instruction selection would constrain the virtual register to a specific class, so when the def was selected later the bank no longer was set to VCC. Remove the SCC reg bank. SCC isn't directly addressable, so it requires copying from SCC to an allocatable 32-bit register during selection, so these might as well be treated as 32-bit SGPR values. Now any scalar boolean value that will produce an outupt in SCC should be widened during RegBankSelect to s32. Any s1 value should be a vector boolean during selection. This makes the vcc register bank unambiguous with a normal SGPR during selection. Summary of how this should now work: - G_TRUNC is always a no-op, and never should use a vcc bank result. - SALU boolean operations should be promoted to s32 in RegBankSelect apply mapping - An s1 value means vcc bank at selection. The exception is for legalization artifacts that use s1, which are never VCC. All other contexts should infer the VCC register classes for s1 typed registers. The LLT for the register is now needed to infer the correct register class. Extensions with vcc sources should be legalized to a select of constants during RegBankSelect. - Copy from non-vcc to vcc ensures high bits of the input value are cleared during selection. - SALU boolean inputs should ensure the inputs are 0/1. This includes select, conditional branches, and carry-ins. There are a few somewhat dirty details. One is that G_TRUNC/G_*EXT selection ignores the usual register-bank from register class functions, and can't handle truncates with VCC result banks. I think this is OK, since the artifacts are specially treated anyway. This does require some care to avoid producing cases with vcc. There will also be no 100% reliable way to verify this rule is followed in selection in case of register classes, and violations manifests themselves as invalid copy instructions much later. Standard phi handling also only considers the bank of the result register, and doesn't insert copies to make the source banks match. This doesn't work for vcc, so we have to manually correct phi inputs in this case. We should add a verifier check to make sure there are no phis with mixed vcc and non-vcc register bank inputs. There's also some duplication with the LegalizerHelper, and some code which should live in the helper. I don't see a good way to share special knowledge about what types to use for intermediate operations depending on the bank for example. Using the helper to replace extensions with selects also seems somewhat awkward to me. Another issue is there are some contexts calling getRegBankFromRegClass that apparently don't have the LLT type for the register, but I haven't yet run into a real issue from this. This also introduces new unnecessary instructions in most cases, since we don't yet try to optimize out the zext when the source is known to come from a compare.
2019-11-03 00:30:59 +08:00
# The source register already has an assigned register class that
# should not be interpreted as vcc.
---
name: anyext_regclass_sgpr_s1_to_sgpr_s32
legalized: true
regBankSelected: true
body: |
bb.0:
liveins: $sgpr0
; GCN-LABEL: name: anyext_regclass_sgpr_s1_to_sgpr_s32
; GCN: [[COPY:%[0-9]+]]:sreg_32 = COPY $sgpr0
; GCN: $sgpr0 = COPY [[COPY]]
%0:sgpr(s32) = COPY $sgpr0
%1:sreg_32(s1) = G_TRUNC %0
%2:sgpr(s32) = G_ANYEXT %1
$sgpr0 = COPY %2
...