maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/clang/test/Modules/rebuild.m

44 lines
2.2 KiB
Mathematica
Raw Normal View History

Add a "signature" to AST files to verify that they haven't changed Since the order of the IDs in the AST file (e.g. DeclIDs, SelectorIDs) is not stable, it is not safe to load an AST file that depends on another AST file that has been rebuilt since the importer was built, even if "nothing changed". We previously used size and modtime to check this, but I've seen cases where a module rebuilt quickly enough to foil this check and caused very hard to debug build errors. To save cycles when we're loading the AST, we just generate a random nonce value and check that it hasn't changed when we load an imported module, rather than actually hash the whole file. This is slightly complicated by the fact that we need to verify the signature inside addModule, since we might otherwise consider that a mdoule is "OutOfDate" when really it is the importer that is out of date. I didn't see any regressions in module load time after this change. llvm-svn: 220493
2014-10-24 02:05:36 +08:00
// RUN: rm -rf %t
// Build Module and set its timestamp
[modules] Simplify -cc1 interface for enabling implicit module maps. We used to have a flag to enable module maps, and two more flags to enable implicit module maps. This is all redundant; we don't need any flag for enabling module maps in the abstract, and we don't usually have -fno- flags for -cc1. We now have just a single flag, -fimplicit-module-maps, that enables implicitly searching the file system for module map files and loading them. The driver interface is unchanged for now. We should probably rename -fmodule-maps to -fimplicit-module-maps at some point. llvm-svn: 239789
2015-06-16 08:08:24 +08:00
// RUN: echo '@import Module;' | %clang_cc1 -fmodules -fimplicit-module-maps -fmodules-cache-path=%t -fdisable-module-hash -fsyntax-only -F %S/Inputs -x objective-c -
Add a "signature" to AST files to verify that they haven't changed Since the order of the IDs in the AST file (e.g. DeclIDs, SelectorIDs) is not stable, it is not safe to load an AST file that depends on another AST file that has been rebuilt since the importer was built, even if "nothing changed". We previously used size and modtime to check this, but I've seen cases where a module rebuilt quickly enough to foil this check and caused very hard to debug build errors. To save cycles when we're loading the AST, we just generate a random nonce value and check that it hasn't changed when we load an imported module, rather than actually hash the whole file. This is slightly complicated by the fact that we need to verify the signature inside addModule, since we might otherwise consider that a mdoule is "OutOfDate" when really it is the importer that is out of date. I didn't see any regressions in module load time after this change. llvm-svn: 220493
2014-10-24 02:05:36 +08:00
// RUN: touch -m -a -t 201101010000 %t/Module.pcm
// RUN: cp %t/Module.pcm %t/Module.pcm.saved
// RUN: wc -c %t/Module.pcm > %t/Module.size.saved
// Build DependsOnModule
[modules] Simplify -cc1 interface for enabling implicit module maps. We used to have a flag to enable module maps, and two more flags to enable implicit module maps. This is all redundant; we don't need any flag for enabling module maps in the abstract, and we don't usually have -fno- flags for -cc1. We now have just a single flag, -fimplicit-module-maps, that enables implicitly searching the file system for module map files and loading them. The driver interface is unchanged for now. We should probably rename -fmodule-maps to -fimplicit-module-maps at some point. llvm-svn: 239789
2015-06-16 08:08:24 +08:00
// RUN: %clang_cc1 -fmodules -fimplicit-module-maps -fmodules-cache-path=%t -fdisable-module-hash -fsyntax-only -F %S/Inputs %s
Add a "signature" to AST files to verify that they haven't changed Since the order of the IDs in the AST file (e.g. DeclIDs, SelectorIDs) is not stable, it is not safe to load an AST file that depends on another AST file that has been rebuilt since the importer was built, even if "nothing changed". We previously used size and modtime to check this, but I've seen cases where a module rebuilt quickly enough to foil this check and caused very hard to debug build errors. To save cycles when we're loading the AST, we just generate a random nonce value and check that it hasn't changed when we load an imported module, rather than actually hash the whole file. This is slightly complicated by the fact that we need to verify the signature inside addModule, since we might otherwise consider that a mdoule is "OutOfDate" when really it is the importer that is out of date. I didn't see any regressions in module load time after this change. llvm-svn: 220493
2014-10-24 02:05:36 +08:00
// RUN: diff %t/Module.pcm %t/Module.pcm.saved
// RUN: cp %t/DependsOnModule.pcm %t/DependsOnModule.pcm.saved
// Rebuild Module, reset its timestamp, and verify its size hasn't changed
// RUN: rm %t/Module.pcm
[modules] Simplify -cc1 interface for enabling implicit module maps. We used to have a flag to enable module maps, and two more flags to enable implicit module maps. This is all redundant; we don't need any flag for enabling module maps in the abstract, and we don't usually have -fno- flags for -cc1. We now have just a single flag, -fimplicit-module-maps, that enables implicitly searching the file system for module map files and loading them. The driver interface is unchanged for now. We should probably rename -fmodule-maps to -fimplicit-module-maps at some point. llvm-svn: 239789
2015-06-16 08:08:24 +08:00
// RUN: echo '@import Module;' | %clang_cc1 -fmodules -fimplicit-module-maps -fmodules-cache-path=%t -fdisable-module-hash -fsyntax-only -F %S/Inputs -x objective-c -
Add a "signature" to AST files to verify that they haven't changed Since the order of the IDs in the AST file (e.g. DeclIDs, SelectorIDs) is not stable, it is not safe to load an AST file that depends on another AST file that has been rebuilt since the importer was built, even if "nothing changed". We previously used size and modtime to check this, but I've seen cases where a module rebuilt quickly enough to foil this check and caused very hard to debug build errors. To save cycles when we're loading the AST, we just generate a random nonce value and check that it hasn't changed when we load an imported module, rather than actually hash the whole file. This is slightly complicated by the fact that we need to verify the signature inside addModule, since we might otherwise consider that a mdoule is "OutOfDate" when really it is the importer that is out of date. I didn't see any regressions in module load time after this change. llvm-svn: 220493
2014-10-24 02:05:36 +08:00
// RUN: touch -m -a -t 201101010000 %t/Module.pcm
// RUN: wc -c %t/Module.pcm > %t/Module.size
// RUN: diff %t/Module.size %t/Module.size.saved
// RUN: cp %t/Module.pcm %t/Module.pcm.saved.2
Modules: Use hash of PCM content for SIGNATURE Change ASTFileSignature from a random 32-bit number to the hash of the PCM content. - Move definition ASTFileSignature to Basic/Module.h so Module and ASTSourceDescriptor can use it. - Change the signature from uint64_t to std::array<uint32_t,5>. - Stop using (saving/reading) the size and modification time of PCM files when there is a valid SIGNATURE. - Add UNHASHED_CONTROL_BLOCK, and use it to store the SIGNATURE record and other records that shouldn't affect the hash. Because implicit modules reuses the same file for multiple levels of -Werror, this includes DIAGNOSTIC_OPTIONS and DIAG_PRAGMA_MAPPINGS. This helps to solve a PCH + implicit Modules dependency issue: PCH files are handled by the external build system, whereas implicit modules are handled by internal compiler build system. This prevents invalidating a PCH when the compiler overwrites a PCM file with the same content (modulo the diagnostic differences). Design and original patch by Manman Ren! llvm-svn: 297655
2017-03-14 02:45:08 +08:00
// The signature is the hash of the PCM content, we will not rebuild rebuild DependsOnModule.
[modules] Simplify -cc1 interface for enabling implicit module maps. We used to have a flag to enable module maps, and two more flags to enable implicit module maps. This is all redundant; we don't need any flag for enabling module maps in the abstract, and we don't usually have -fno- flags for -cc1. We now have just a single flag, -fimplicit-module-maps, that enables implicitly searching the file system for module map files and loading them. The driver interface is unchanged for now. We should probably rename -fmodule-maps to -fimplicit-module-maps at some point. llvm-svn: 239789
2015-06-16 08:08:24 +08:00
// RUN: %clang_cc1 -fmodules -fimplicit-module-maps -fmodules-cache-path=%t -fdisable-module-hash -fsyntax-only -F %S/Inputs %s
Add a "signature" to AST files to verify that they haven't changed Since the order of the IDs in the AST file (e.g. DeclIDs, SelectorIDs) is not stable, it is not safe to load an AST file that depends on another AST file that has been rebuilt since the importer was built, even if "nothing changed". We previously used size and modtime to check this, but I've seen cases where a module rebuilt quickly enough to foil this check and caused very hard to debug build errors. To save cycles when we're loading the AST, we just generate a random nonce value and check that it hasn't changed when we load an imported module, rather than actually hash the whole file. This is slightly complicated by the fact that we need to verify the signature inside addModule, since we might otherwise consider that a mdoule is "OutOfDate" when really it is the importer that is out of date. I didn't see any regressions in module load time after this change. llvm-svn: 220493
2014-10-24 02:05:36 +08:00
// RUN: diff %t/Module.pcm %t/Module.pcm.saved.2
Modules: Use hash of PCM content for SIGNATURE Change ASTFileSignature from a random 32-bit number to the hash of the PCM content. - Move definition ASTFileSignature to Basic/Module.h so Module and ASTSourceDescriptor can use it. - Change the signature from uint64_t to std::array<uint32_t,5>. - Stop using (saving/reading) the size and modification time of PCM files when there is a valid SIGNATURE. - Add UNHASHED_CONTROL_BLOCK, and use it to store the SIGNATURE record and other records that shouldn't affect the hash. Because implicit modules reuses the same file for multiple levels of -Werror, this includes DIAGNOSTIC_OPTIONS and DIAG_PRAGMA_MAPPINGS. This helps to solve a PCH + implicit Modules dependency issue: PCH files are handled by the external build system, whereas implicit modules are handled by internal compiler build system. This prevents invalidating a PCH when the compiler overwrites a PCM file with the same content (modulo the diagnostic differences). Design and original patch by Manman Ren! llvm-svn: 297655
2017-03-14 02:45:08 +08:00
// RUN: diff %t/DependsOnModule.pcm %t/DependsOnModule.pcm.saved
Add a "signature" to AST files to verify that they haven't changed Since the order of the IDs in the AST file (e.g. DeclIDs, SelectorIDs) is not stable, it is not safe to load an AST file that depends on another AST file that has been rebuilt since the importer was built, even if "nothing changed". We previously used size and modtime to check this, but I've seen cases where a module rebuilt quickly enough to foil this check and caused very hard to debug build errors. To save cycles when we're loading the AST, we just generate a random nonce value and check that it hasn't changed when we load an imported module, rather than actually hash the whole file. This is slightly complicated by the fact that we need to verify the signature inside addModule, since we might otherwise consider that a mdoule is "OutOfDate" when really it is the importer that is out of date. I didn't see any regressions in module load time after this change. llvm-svn: 220493
2014-10-24 02:05:36 +08:00
Check module signature when the module has already been loaded We may need to verify the signature on subsequent imports as well, just like we verify the size/modtime: @import A; @import B; // imports A @import C; // imports A llvm-svn: 221569
2014-11-08 08:34:30 +08:00
// Rebuild Module, reset its timestamp, and verify its size hasn't changed
// RUN: rm %t/Module.pcm
[modules] Simplify -cc1 interface for enabling implicit module maps. We used to have a flag to enable module maps, and two more flags to enable implicit module maps. This is all redundant; we don't need any flag for enabling module maps in the abstract, and we don't usually have -fno- flags for -cc1. We now have just a single flag, -fimplicit-module-maps, that enables implicitly searching the file system for module map files and loading them. The driver interface is unchanged for now. We should probably rename -fmodule-maps to -fimplicit-module-maps at some point. llvm-svn: 239789
2015-06-16 08:08:24 +08:00
// RUN: echo '@import Module;' | %clang_cc1 -fmodules -fimplicit-module-maps -fmodules-cache-path=%t -fdisable-module-hash -fsyntax-only -F %S/Inputs -x objective-c -
Check module signature when the module has already been loaded We may need to verify the signature on subsequent imports as well, just like we verify the size/modtime: @import A; @import B; // imports A @import C; // imports A llvm-svn: 221569
2014-11-08 08:34:30 +08:00
// RUN: touch -m -a -t 201101010000 %t/Module.pcm
// RUN: wc -c %t/Module.pcm > %t/Module.size
// RUN: diff %t/Module.size %t/Module.size.saved
// RUN: cp %t/Module.pcm %t/Module.pcm.saved.2
// Verify again with Module pre-imported.
[modules] Simplify -cc1 interface for enabling implicit module maps. We used to have a flag to enable module maps, and two more flags to enable implicit module maps. This is all redundant; we don't need any flag for enabling module maps in the abstract, and we don't usually have -fno- flags for -cc1. We now have just a single flag, -fimplicit-module-maps, that enables implicitly searching the file system for module map files and loading them. The driver interface is unchanged for now. We should probably rename -fmodule-maps to -fimplicit-module-maps at some point. llvm-svn: 239789
2015-06-16 08:08:24 +08:00
// RUN: %clang_cc1 -fmodules -fimplicit-module-maps -fmodules-cache-path=%t -fdisable-module-hash -fsyntax-only -F %S/Inputs %s
Check module signature when the module has already been loaded We may need to verify the signature on subsequent imports as well, just like we verify the size/modtime: @import A; @import B; // imports A @import C; // imports A llvm-svn: 221569
2014-11-08 08:34:30 +08:00
// RUN: diff %t/Module.pcm %t/Module.pcm.saved.2
Modules: Use hash of PCM content for SIGNATURE Change ASTFileSignature from a random 32-bit number to the hash of the PCM content. - Move definition ASTFileSignature to Basic/Module.h so Module and ASTSourceDescriptor can use it. - Change the signature from uint64_t to std::array<uint32_t,5>. - Stop using (saving/reading) the size and modification time of PCM files when there is a valid SIGNATURE. - Add UNHASHED_CONTROL_BLOCK, and use it to store the SIGNATURE record and other records that shouldn't affect the hash. Because implicit modules reuses the same file for multiple levels of -Werror, this includes DIAGNOSTIC_OPTIONS and DIAG_PRAGMA_MAPPINGS. This helps to solve a PCH + implicit Modules dependency issue: PCH files are handled by the external build system, whereas implicit modules are handled by internal compiler build system. This prevents invalidating a PCH when the compiler overwrites a PCM file with the same content (modulo the diagnostic differences). Design and original patch by Manman Ren! llvm-svn: 297655
2017-03-14 02:45:08 +08:00
// RUN: diff %t/DependsOnModule.pcm %t/DependsOnModule.pcm.saved
Check module signature when the module has already been loaded We may need to verify the signature on subsequent imports as well, just like we verify the size/modtime: @import A; @import B; // imports A @import C; // imports A llvm-svn: 221569
2014-11-08 08:34:30 +08:00
#ifdef PREIMPORT
@import Module;
#endif
Add a "signature" to AST files to verify that they haven't changed Since the order of the IDs in the AST file (e.g. DeclIDs, SelectorIDs) is not stable, it is not safe to load an AST file that depends on another AST file that has been rebuilt since the importer was built, even if "nothing changed". We previously used size and modtime to check this, but I've seen cases where a module rebuilt quickly enough to foil this check and caused very hard to debug build errors. To save cycles when we're loading the AST, we just generate a random nonce value and check that it hasn't changed when we load an imported module, rather than actually hash the whole file. This is slightly complicated by the fact that we need to verify the signature inside addModule, since we might otherwise consider that a mdoule is "OutOfDate" when really it is the importer that is out of date. I didn't see any regressions in module load time after this change. llvm-svn: 220493
2014-10-24 02:05:36 +08:00
@import DependsOnModule;