llvm-project/llvm/lib/Analysis/CMakeLists.txt

72 lines
1.5 KiB
CMake
Raw Normal View History

add_llvm_library(LLVMAnalysis
AliasAnalysis.cpp
AliasAnalysisCounter.cpp
AliasAnalysisEvaluator.cpp
AliasDebugger.cpp
AliasSetTracker.cpp
Analysis.cpp
AssumptionCache.cpp
BasicAliasAnalysis.cpp
BlockFrequencyInfo.cpp
BlockFrequencyInfoImpl.cpp
BranchProbabilityInfo.cpp
CFG.cpp
CFGPrinter.cpp
CFLAliasAnalysis.cpp
CGSCCPassManager.cpp
CaptureTracking.cpp
CostModel.cpp
CodeMetrics.cpp
ConstantFolding.cpp
Delinearization.cpp
DependenceAnalysis.cpp
DivergenceAnalysis.cpp
DomPrinter.cpp
2011-03-01 08:02:51 +08:00
DominanceFrontier.cpp
IVUsers.cpp
InstCount.cpp
InstructionSimplify.cpp
Interval.cpp
IntervalPartition.cpp
IteratedDominanceFrontier.cpp
[PM] Add a new "lazy" call graph analysis pass for the new pass manager. The primary motivation for this pass is to separate the call graph analysis used by the new pass manager's CGSCC pass management from the existing call graph analysis pass. That analysis pass is (somewhat unfortunately) over-constrained by the existing CallGraphSCCPassManager requirements. Those requirements make it *really* hard to cleanly layer the needed functionality for the new pass manager on top of the existing analysis. However, there are also a bunch of things that the pass manager would specifically benefit from doing differently from the existing call graph analysis, and this new implementation tries to address several of them: - Be lazy about scanning function definitions. The existing pass eagerly scans the entire module to build the initial graph. This new pass is significantly more lazy, and I plan to push this even further to maximize locality during CGSCC walks. - Don't use a single synthetic node to partition functions with an indirect call from functions whose address is taken. This node creates a huge choke-point which would preclude good parallelization across the fanout of the SCC graph when we got to the point of looking at such changes to LLVM. - Use a memory dense and lightweight representation of the call graph rather than value handles and tracking call instructions. This will require explicit update calls instead of some updates working transparently, but should end up being significantly more efficient. The explicit update calls ended up being needed in many cases for the existing call graph so we don't really lose anything. - Doesn't explicitly model SCCs and thus doesn't provide an "identity" for an SCC which is stable across updates. This is essential for the new pass manager to work correctly. - Only form the graph necessary for traversing all of the functions in an SCC friendly order. This is a much simpler graph structure and should be more memory dense. It does limit the ways in which it is appropriate to use this analysis. I wish I had a better name than "call graph". I've commented extensively this aspect. This is still very much a WIP, in fact it is really just the initial bits. But it is about the fourth version of the initial bits that I've implemented with each of the others running into really frustrating problms. This looks like it will actually work and I'd like to split the actual complexity across commits for the sake of my reviewers. =] The rest of the implementation along with lots of wiring will follow somewhat more rapidly now that there is a good path forward. Naturally, this doesn't impact any of the existing optimizer. This code is specific to the new pass manager. A bunch of thanks are deserved for the various folks that have helped with the design of this, especially Nick Lewycky who actually sat with me to go through the fundamentals of the final version here. llvm-svn: 200903
2014-02-06 12:37:03 +08:00
LazyCallGraph.cpp
LazyValueInfo.cpp
LibCallAliasAnalysis.cpp
LibCallSemantics.cpp
2010-04-09 02:52:18 +08:00
Lint.cpp
Loads.cpp
LoopAccessAnalysis.cpp
LoopInfo.cpp
LoopPass.cpp
2010-09-17 07:06:18 +08:00
MemDepPrinter.cpp
MemDerefPrinter.cpp
MemoryBuiltins.cpp
MemoryDependenceAnalysis.cpp
ModuleDebugInfoPrinter.cpp
2011-03-01 08:02:51 +08:00
NoAliasAnalysis.cpp
PHITransAddr.cpp
PostDominators.cpp
Add a new visitor for walking the uses of a pointer value. This visitor provides infrastructure for recursively traversing the use-graph of a pointer-producing instruction like an alloca or a malloc. It maintains a worklist of uses to visit, so it can handle very deep recursions. It automatically looks through instructions which simply translate one pointer to another (bitcasts and GEPs). It tracks the offset relative to the original pointer as long as that offset remains constant and exposes it during the visit as an APInt offset. Finally, it performs conservative escape analysis. However, currently it has some limitations that should be addressed going forward: 1) It doesn't handle vectors of pointers. 2) It doesn't provide a cheaper visitor when the constant offset tracking isn't needed. 3) It doesn't support non-instruction pointer values. The current functionality is exactly what is required to implement the SROA pointer-use visitors in terms of this one, rather than in terms of their own ad-hoc base visitor, which was always very poorly specified. SROA has been converted to use this, and the code there deleted which this utility now provides. Technically speaking, using this new visitor allows SROA to handle a few more cases than it previously did. It is now more aggressive in ignoring chains of instructions which look like they would defeat SROA, but in fact do not because they never result in a read or write of memory. While this is "neat", it shouldn't be interesting for real programs as any such chains should have been removed by others passes long before we get to SROA. As a consequence, I've not added any tests for these features -- it shouldn't be part of SROA's contract to perform such heroics. The goal is to extend the functionality of this visitor going forward, and re-use it from passes like ASan that can benefit from doing a detailed walk of the uses of a pointer. Thanks to Ben Kramer for the code review rounds and lots of help reviewing and debugging this patch. llvm-svn: 169728
2012-12-10 16:28:39 +08:00
PtrUseVisitor.cpp
RegionInfo.cpp
RegionPass.cpp
RegionPrinter.cpp
ScalarEvolution.cpp
2009-08-27 00:33:57 +08:00
ScalarEvolutionAliasAnalysis.cpp
ScalarEvolutionExpander.cpp
2010-04-08 07:01:37 +08:00
ScalarEvolutionNormalization.cpp
SparsePropagation.cpp
TargetLibraryInfo.cpp
TargetTransformInfo.cpp
Trace.cpp
2010-08-03 10:38:20 +08:00
TypeBasedAliasAnalysis.cpp
Add scoped-noalias metadata This commit adds scoped noalias metadata. The primary motivations for this feature are: 1. To preserve noalias function attribute information when inlining 2. To provide the ability to model block-scope C99 restrict pointers Neither of these two abilities are added here, only the necessary infrastructure. In fact, there should be no change to existing functionality, only the addition of new features. The logic that converts noalias function parameters into this metadata during inlining will come in a follow-up commit. What is added here is the ability to generally specify noalias memory-access sets. Regarding the metadata, alias-analysis scopes are defined similar to TBAA nodes: !scope0 = metadata !{ metadata !"scope of foo()" } !scope1 = metadata !{ metadata !"scope 1", metadata !scope0 } !scope2 = metadata !{ metadata !"scope 2", metadata !scope0 } !scope3 = metadata !{ metadata !"scope 2.1", metadata !scope2 } !scope4 = metadata !{ metadata !"scope 2.2", metadata !scope2 } Loads and stores can be tagged with an alias-analysis scope, and also, with a noalias tag for a specific scope: ... = load %ptr1, !alias.scope !{ !scope1 } ... = load %ptr2, !alias.scope !{ !scope1, !scope2 }, !noalias !{ !scope1 } When evaluating an aliasing query, if one of the instructions is associated with an alias.scope id that is identical to the noalias scope associated with the other instruction, or is a descendant (in the scope hierarchy) of the noalias scope associated with the other instruction, then the two memory accesses are assumed not to alias. Note that is the first element of the scope metadata is a string, then it can be combined accross functions and translation units. The string can be replaced by a self-reference to create globally unqiue scope identifiers. [Note: This overview is slightly stylized, since the metadata nodes really need to just be numbers (!0 instead of !scope0), and the scope lists are also global unnamed metadata.] Existing noalias metadata in a callee is "cloned" for use by the inlined code. This is necessary because the aliasing scopes are unique to each call site (because of possible control dependencies on the aliasing properties). For example, consider a function: foo(noalias a, noalias b) { *a = *b; } that gets inlined into bar() { ... if (...) foo(a1, b1); ... if (...) foo(a2, b2); } -- now just because we know that a1 does not alias with b1 at the first call site, and a2 does not alias with b2 at the second call site, we cannot let inlining these functons have the metadata imply that a1 does not alias with b2. llvm-svn: 213864
2014-07-24 22:25:39 +08:00
ScopedNoAliasAA.cpp
ValueTracking.cpp
ADDITIONAL_HEADER_DIRS
${LLVM_MAIN_INCLUDE_DIR}/llvm/Analysis
)
add_dependencies(LLVMAnalysis intrinsics_gen)
add_subdirectory(IPA)