2020-06-25 15:01:15 +08:00
|
|
|
// RUN: %clang_cc1 -verify -fopenmp -x c++ -triple %itanium_abi_triple -emit-llvm %s -fexceptions -fcxx-exceptions -o - -fsanitize-address-use-after-scope -fopenmp-version=45 | FileCheck %s --implicit-check-not='ret i32 {{6|7|8|9|10|12|13|14|15|19|21|22|23|24}}'
|
2020-08-28 03:35:36 +08:00
|
|
|
// RUN: %clang_cc1 -fopenmp -x c++ -std=c++11 -triple %itanium_abi_triple -fexceptions -fcxx-exceptions -emit-pch -o %t %s
|
|
|
|
// RUN: %clang_cc1 -fopenmp -x c++ -triple %itanium_abi_triple -fexceptions -fcxx-exceptions -std=c++11 -include-pch %t -verify %s -emit-llvm -o - | FileCheck %s --implicit-check-not='ret i32 {{6|7|8|9|10|12|13|14|15|19|21|22|23|24}}'
|
2019-10-02 04:18:32 +08:00
|
|
|
// expected-no-diagnostics
|
|
|
|
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
// CHECK-DAG: ret i32 2
|
|
|
|
// CHECK-DAG: ret i32 3
|
|
|
|
// CHECK-DAG: ret i32 4
|
|
|
|
// CHECK-DAG: ret i32 5
|
|
|
|
// CHECK-DAG: ret i32 11
|
|
|
|
// CHECK-DAG: ret i32 16
|
|
|
|
// CHECK-DAG: ret i32 17
|
|
|
|
// CHECK-DAG: ret i32 18
|
|
|
|
// CHECK-DAG: ret i32 19
|
|
|
|
// CHECK-DAG: ret i32 20
|
|
|
|
// CHECK-DAG: ret i32 25
|
|
|
|
// CHECK-DAG: ret i32 26
|
|
|
|
// CHECK-DAG: ret i32 27
|
|
|
|
// CHECK-DAG: ret i32 28
|
|
|
|
// CHECK-DAG: ret i32 29
|
2019-10-02 04:18:32 +08:00
|
|
|
|
|
|
|
#ifndef HEADER
|
|
|
|
#define HEADER
|
|
|
|
|
|
|
|
int foo() { return 2; }
|
|
|
|
|
|
|
|
#pragma omp declare variant(foo) match(implementation = {vendor(llvm)})
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int bar() { return 3; }
|
2019-10-02 04:18:32 +08:00
|
|
|
|
|
|
|
int bazzz();
|
|
|
|
#pragma omp declare variant(bazzz) match(implementation = {vendor(llvm)})
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int baz() { return 4; }
|
2019-10-02 04:18:32 +08:00
|
|
|
|
|
|
|
int test();
|
|
|
|
#pragma omp declare variant(test) match(implementation = {vendor(llvm)})
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int call() { return 5; }
|
2019-10-02 04:18:32 +08:00
|
|
|
|
|
|
|
static int stat_unused_();
|
|
|
|
#pragma omp declare variant(stat_unused_) match(implementation = {vendor(llvm)})
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
static int stat_unused() { return 6; }
|
2019-10-02 04:18:32 +08:00
|
|
|
|
|
|
|
static int stat_used_();
|
|
|
|
#pragma omp declare variant(stat_used_) match(implementation = {vendor(llvm)})
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
static int stat_used() { return 7; }
|
2019-10-02 04:18:32 +08:00
|
|
|
|
|
|
|
int main() { return bar() + baz() + call() + stat_used(); }
|
|
|
|
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int test() { return 8; }
|
|
|
|
static int stat_unused_() { return 9; }
|
|
|
|
static int stat_used_() { return 10; }
|
2019-10-02 04:18:32 +08:00
|
|
|
|
|
|
|
struct SpecialFuncs {
|
|
|
|
void vd() {}
|
|
|
|
SpecialFuncs();
|
|
|
|
~SpecialFuncs();
|
|
|
|
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int method_() { return 11; }
|
2019-10-02 04:18:32 +08:00
|
|
|
#pragma omp declare variant(SpecialFuncs::method_) \
|
|
|
|
match(implementation = {vendor(llvm)})
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int method() { return 12; }
|
2019-10-02 04:18:32 +08:00
|
|
|
#pragma omp declare variant(SpecialFuncs::method_) \
|
|
|
|
match(implementation = {vendor(llvm)})
|
|
|
|
int Method();
|
|
|
|
} s;
|
|
|
|
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int SpecialFuncs::Method() { return 13; }
|
2019-10-02 04:18:32 +08:00
|
|
|
|
|
|
|
struct SpecSpecialFuncs {
|
|
|
|
void vd() {}
|
|
|
|
SpecSpecialFuncs();
|
|
|
|
~SpecSpecialFuncs();
|
|
|
|
|
|
|
|
int method_();
|
|
|
|
#pragma omp declare variant(SpecSpecialFuncs::method_) \
|
|
|
|
match(implementation = {vendor(llvm)})
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int method() { return 14; }
|
2019-10-02 04:18:32 +08:00
|
|
|
#pragma omp declare variant(SpecSpecialFuncs::method_) \
|
|
|
|
match(implementation = {vendor(llvm)})
|
|
|
|
int Method();
|
|
|
|
} s1;
|
|
|
|
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int SpecSpecialFuncs::method_() { return 15; }
|
|
|
|
int SpecSpecialFuncs::Method() { return 16; }
|
2019-10-02 04:18:32 +08:00
|
|
|
|
|
|
|
void xxx() {
|
|
|
|
(void)s.method();
|
|
|
|
(void)s1.method();
|
|
|
|
}
|
|
|
|
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int prio() { return 17; }
|
|
|
|
int prio1() { return 18; }
|
2019-10-04 04:49:48 +08:00
|
|
|
|
|
|
|
#pragma omp declare variant(prio) match(implementation = {vendor(llvm)})
|
|
|
|
#pragma omp declare variant(prio1) match(implementation = {vendor(score(1): llvm)})
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int prio_() { return 19; }
|
2019-10-04 04:49:48 +08:00
|
|
|
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
static int prio2() { return 20; }
|
|
|
|
static int prio3() { return 21; }
|
|
|
|
static int prio4() { return 22; }
|
2019-10-04 04:49:48 +08:00
|
|
|
|
|
|
|
#pragma omp declare variant(prio4) match(implementation = {vendor(score(3): llvm)})
|
|
|
|
#pragma omp declare variant(prio2) match(implementation = {vendor(score(5): llvm)})
|
|
|
|
#pragma omp declare variant(prio3) match(implementation = {vendor(score(1): llvm)})
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
static int prio1_() { return 23; }
|
2019-10-04 04:49:48 +08:00
|
|
|
|
|
|
|
int int_fn() { return prio1_(); }
|
|
|
|
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int fn_linkage_variant() { return 24; }
|
2019-10-08 22:56:20 +08:00
|
|
|
extern "C" {
|
|
|
|
#pragma omp declare variant(fn_linkage_variant) match(implementation = {vendor(llvm)})
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int fn_linkage() { return 25; }
|
2019-10-08 22:56:20 +08:00
|
|
|
}
|
|
|
|
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
extern "C" int fn_linkage_variant1() { return 26; }
|
2019-10-08 22:56:20 +08:00
|
|
|
#pragma omp declare variant(fn_linkage_variant1) match(implementation = {vendor(llvm)})
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int fn_linkage1() { return 27; }
|
2019-10-08 22:56:20 +08:00
|
|
|
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int fn_variant2() { return 28; }
|
2019-10-09 03:44:16 +08:00
|
|
|
#pragma omp declare variant(fn_variant2) match(implementation = {vendor(llvm, ibm)})
|
[OpenMP] `omp begin/end declare variant` - part 2, sema ("+CG")
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
2020-02-26 06:04:06 +08:00
|
|
|
int fn2() { return 29; }
|
2019-10-09 03:44:16 +08:00
|
|
|
|
2019-10-02 04:18:32 +08:00
|
|
|
#endif // HEADER
|