maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/lldb/source/Symbol/UnwindPlan.cpp

442 lines
13 KiB
C++
Raw Normal View History

The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
//===-- UnwindPlan.cpp ----------------------------------*- C++ -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
#include "lldb/Symbol/UnwindPlan.h"
Got the EmulateInstruction CFI code a lot closer to producing CFI data. Switch the EmulateInstruction to use the standard RegisterInfo structure that is defined in the lldb private types intead of passing the reg kind and reg num everywhere. EmulateInstruction subclasses also need to provide RegisterInfo structs given a reg kind and reg num. This eliminates the need for the GetRegisterName() virtual function and allows more complete information to be passed around in the read/write register callbacks. Subclasses should always provide RegiterInfo structs with the generic register info filled in as well as at least one kind of register number in the RegisterInfo.kinds[] array. llvm-svn: 130256
2011-04-27 07:48:45 +08:00
#include "lldb/Core/ConstString.h"
Moved the section load list up into the target so we can use the target to symbolicate things without the need for a valid process subclass. llvm-svn: 113895
2010-09-15 07:36:40 +08:00
#include "lldb/Target/Process.h"
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
#include "lldb/Target/RegisterContext.h"
Moved the section load list up into the target so we can use the target to symbolicate things without the need for a valid process subclass. llvm-svn: 113895
2010-09-15 07:36:40 +08:00
#include "lldb/Target/Thread.h"
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
using namespace lldb;
using namespace lldb_private;
bool
UnwindPlan::Row::RegisterLocation::operator == (const UnwindPlan::Row::RegisterLocation& rhs) const
{
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
if (m_type == rhs.m_type)
{
switch (m_type)
{
case unspecified:
case undefined:
case same:
return true;
case atCFAPlusOffset:
case isCFAPlusOffset:
return m_location.offset == rhs.m_location.offset;
case inOtherRegister:
return m_location.reg_num == rhs.m_location.reg_num;
case atDWARFExpression:
case isDWARFExpression:
if (m_location.expr.length == rhs.m_location.expr.length)
return !memcmp (m_location.expr.opcodes, rhs.m_location.expr.opcodes, m_location.expr.length);
break;
}
}
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
return false;
}
// This function doesn't copy the dwarf expression bytes; they must remain in allocated
// memory for the lifespan of this UnwindPlan object.
void
UnwindPlan::Row::RegisterLocation::SetAtDWARFExpression (const uint8_t *opcodes, uint32_t len)
{
m_type = atDWARFExpression;
m_location.expr.opcodes = opcodes;
m_location.expr.length = len;
}
// This function doesn't copy the dwarf expression bytes; they must remain in allocated
// memory for the lifespan of this UnwindPlan object.
void
UnwindPlan::Row::RegisterLocation::SetIsDWARFExpression (const uint8_t *opcodes, uint32_t len)
{
m_type = isDWARFExpression;
m_location.expr.opcodes = opcodes;
m_location.expr.length = len;
}
void
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
UnwindPlan::Row::RegisterLocation::Dump (Stream &s, const UnwindPlan* unwind_plan, const UnwindPlan::Row* row, Thread* thread, bool verbose) const
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
{
switch (m_type)
{
case unspecified:
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
if (verbose)
s.PutCString ("=<unspec>");
else
s.PutCString ("=!");
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
break;
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
case undefined:
if (verbose)
s.PutCString ("=<undef>");
else
s.PutCString ("=?");
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
break;
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
case same:
s.PutCString ("= <same>");
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
break;
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
case atCFAPlusOffset:
case isCFAPlusOffset:
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
{
s.PutChar('=');
if (m_type == atCFAPlusOffset)
s.PutChar('[');
if (verbose)
s.Printf ("CFA%+d", m_location.offset);
if (unwind_plan && row)
{
const uint32_t cfa_reg = row->GetCFARegister();
const RegisterInfo *cfa_reg_info = unwind_plan->GetRegisterInfo (thread, cfa_reg);
const int32_t offset = row->GetCFAOffset() + m_location.offset;
if (verbose)
{
if (cfa_reg_info)
s.Printf (" (%s%+d)", cfa_reg_info->name, offset);
else
Fix two 'dereference of a null pointer' detected by the static analyzer. llvm-svn: 137394
2011-08-12 08:02:24 +08:00
s.Printf (" (reg(%u)%+d)", cfa_reg, offset);
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
}
else
{
if (cfa_reg_info)
s.Printf ("%s", cfa_reg_info->name);
else
Fix two 'dereference of a null pointer' detected by the static analyzer. llvm-svn: 137394
2011-08-12 08:02:24 +08:00
s.Printf ("reg(%u)", cfa_reg);
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
if (offset != 0)
s.Printf ("%+d", offset);
}
}
if (m_type == atCFAPlusOffset)
s.PutChar(']');
}
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
break;
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
case inOtherRegister:
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
{
const RegisterInfo *other_reg_info = NULL;
if (unwind_plan)
other_reg_info = unwind_plan->GetRegisterInfo (thread, m_location.reg_num);
if (other_reg_info)
s.Printf ("=%s", other_reg_info->name);
else
s.Printf ("=reg(%u)", m_location.reg_num);
}
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
break;
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
case atDWARFExpression:
case isDWARFExpression:
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
{
s.PutChar('=');
if (m_type == atDWARFExpression)
s.PutCString("[dwarf-expr]");
else
s.PutCString("dwarf-expr");
}
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
break;
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
}
}
void
UnwindPlan::Row::Clear ()
{
m_offset = 0;
m_cfa_reg_num = 0;
m_cfa_offset = 0;
m_register_locations.clear();
}
void
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
UnwindPlan::Row::Dump (Stream& s, const UnwindPlan* unwind_plan, Thread* thread, addr_t base_addr) const
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
{
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
const RegisterInfo *reg_info = unwind_plan->GetRegisterInfo (thread, GetCFARegister());
if (base_addr != LLDB_INVALID_ADDRESS)
s.Printf ("0x%16.16llx: CFA=", base_addr + GetOffset());
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
else
Update declarations for all functions/methods that accept printf-style stdarg formats to use __attribute__ format so the compiler can flag incorrect uses. Fix all incorrect uses. Most of these are innocuous, a few were resulting in crashes. llvm-svn: 140185
2011-09-21 05:44:10 +08:00
s.Printf ("0x%8.8llx: CFA=", GetOffset());
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
if (reg_info)
s.Printf ("%s", reg_info->name);
else
s.Printf ("reg(%u)", GetCFARegister());
Remove a little unuseful output from the UnwindPlan::Row::Dump and UnwindPlan::Dump methods. llvm-svn: 161696
2012-08-11 04:52:59 +08:00
s.Printf ("%+3d => ", GetCFAOffset ());
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
for (collection::const_iterator idx = m_register_locations.begin (); idx != m_register_locations.end (); ++idx)
{
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
reg_info = unwind_plan->GetRegisterInfo (thread, idx->first);
if (reg_info)
s.Printf ("%s", reg_info->name);
else
s.Printf ("reg(%u)", idx->first);
const bool verbose = false;
idx->second.Dump(s, unwind_plan, this, thread, verbose);
s.PutChar (' ');
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
}
Made FuncUnwinders threadsafe. Other small cleanups as well. llvm-svn: 123088
2011-01-09 05:19:00 +08:00
s.EOL();
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
}
UnwindPlan::Row::Row() :
m_offset(0),
m_cfa_reg_num(0),
m_cfa_offset(0),
m_register_locations()
{
}
bool
UnwindPlan::Row::GetRegisterInfo (uint32_t reg_num, UnwindPlan::Row::RegisterLocation& register_location) const
{
collection::const_iterator pos = m_register_locations.find(reg_num);
if (pos != m_register_locations.end())
{
register_location = pos->second;
return true;
}
return false;
}
void
UnwindPlan::Row::SetRegisterInfo (uint32_t reg_num, const UnwindPlan::Row::RegisterLocation register_location)
{
m_register_locations[reg_num] = register_location;
}
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
bool
UnwindPlan::Row::SetRegisterLocationToAtCFAPlusOffset (uint32_t reg_num, int32_t offset, bool can_replace)
{
if (!can_replace && m_register_locations.find(reg_num) != m_register_locations.end())
return false;
RegisterLocation reg_loc;
reg_loc.SetAtCFAPlusOffset(offset);
m_register_locations[reg_num] = reg_loc;
return true;
}
bool
UnwindPlan::Row::SetRegisterLocationToIsCFAPlusOffset (uint32_t reg_num, int32_t offset, bool can_replace)
{
if (!can_replace && m_register_locations.find(reg_num) != m_register_locations.end())
return false;
RegisterLocation reg_loc;
reg_loc.SetIsCFAPlusOffset(offset);
m_register_locations[reg_num] = reg_loc;
return true;
}
bool
UnwindPlan::Row::SetRegisterLocationToUndefined (uint32_t reg_num, bool can_replace, bool can_replace_only_if_unspecified)
{
collection::iterator pos = m_register_locations.find(reg_num);
collection::iterator end = m_register_locations.end();
if (pos != end)
{
if (!can_replace)
return false;
if (can_replace_only_if_unspecified && !pos->second.IsUnspecified())
return false;
}
RegisterLocation reg_loc;
reg_loc.SetUndefined();
m_register_locations[reg_num] = reg_loc;
return true;
}
bool
UnwindPlan::Row::SetRegisterLocationToUnspecified (uint32_t reg_num, bool can_replace)
{
if (!can_replace && m_register_locations.find(reg_num) != m_register_locations.end())
return false;
RegisterLocation reg_loc;
reg_loc.SetUnspecified();
m_register_locations[reg_num] = reg_loc;
return true;
}
bool
UnwindPlan::Row::SetRegisterLocationToRegister (uint32_t reg_num,
uint32_t other_reg_num,
bool can_replace)
{
if (!can_replace && m_register_locations.find(reg_num) != m_register_locations.end())
return false;
RegisterLocation reg_loc;
reg_loc.SetInRegister(other_reg_num);
m_register_locations[reg_num] = reg_loc;
return true;
}
bool
UnwindPlan::Row::SetRegisterLocationToSame (uint32_t reg_num, bool must_replace)
{
if (must_replace && m_register_locations.find(reg_num) == m_register_locations.end())
return false;
RegisterLocation reg_loc;
reg_loc.SetSame();
m_register_locations[reg_num] = reg_loc;
return true;
}
void
UnwindPlan::Row::SetCFARegister (uint32_t reg_num)
{
m_cfa_reg_num = reg_num;
}
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
Change UnwindAssemblyInstEmulation::GetNonCallSiteUnwindPlanFromAssembly so it records the state of the unwind instructions once the prologue has finished. If it hits an early return epilogue in the middle of the function, re-instate the prologue after that epilogue has completed so that we can still unwind for cases where the flow of control goes past that early-return. <rdar://problem/11775059> Move the UnwindPlan operator== definition into the .cpp file, expand the definition a bit. Add some casts to a SBCommandInterpreter::HandleCompletion() log statement so it builds without warning on 64- and 32-bit systems. llvm-svn: 160337
2012-07-17 09:57:24 +08:00
bool
UnwindPlan::Row::operator == (const UnwindPlan::Row& rhs) const
{
if (m_offset != rhs.m_offset || m_cfa_reg_num != rhs.m_cfa_reg_num || m_cfa_offset != rhs.m_cfa_offset)
return false;
Cleaned up incorrect STL std::map comparison code and use the operator == on std::map objects instead of manually implementing the comparisons. Also modified the UnwindPlan::AppendRow() function to take a "const RowSP &" object so we don't have to copy shared pointers when calling this function. llvm-svn: 160448
2012-07-19 04:37:53 +08:00
return m_register_locations == rhs.m_register_locations;
Change UnwindAssemblyInstEmulation::GetNonCallSiteUnwindPlanFromAssembly so it records the state of the unwind instructions once the prologue has finished. If it hits an early return epilogue in the middle of the function, re-instate the prologue after that epilogue has completed so that we can still unwind for cases where the flow of control goes past that early-return. <rdar://problem/11775059> Move the UnwindPlan operator== definition into the .cpp file, expand the definition a bit. Add some casts to a SBCommandInterpreter::HandleCompletion() log statement so it builds without warning on 64- and 32-bit systems. llvm-svn: 160337
2012-07-17 09:57:24 +08:00
}
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
void
Cleaned up incorrect STL std::map comparison code and use the operator == on std::map objects instead of manually implementing the comparisons. Also modified the UnwindPlan::AppendRow() function to take a "const RowSP &" object so we don't have to copy shared pointers when calling this function. llvm-svn: 160448
2012-07-19 04:37:53 +08:00
UnwindPlan::AppendRow (const UnwindPlan::RowSP &row_sp)
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
{
Cleaned up incorrect STL std::map comparison code and use the operator == on std::map objects instead of manually implementing the comparisons. Also modified the UnwindPlan::AppendRow() function to take a "const RowSP &" object so we don't have to copy shared pointers when calling this function. llvm-svn: 160448
2012-07-19 04:37:53 +08:00
if (m_row_list.empty() || m_row_list.back()->GetOffset() != row_sp->GetOffset())
m_row_list.push_back(row_sp);
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
else
Cleaned up incorrect STL std::map comparison code and use the operator == on std::map objects instead of manually implementing the comparisons. Also modified the UnwindPlan::AppendRow() function to take a "const RowSP &" object so we don't have to copy shared pointers when calling this function. llvm-svn: 160448
2012-07-19 04:37:53 +08:00
m_row_list.back() = row_sp;
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
}
Switch nearly all of the use of the UnwindPlan::Row's to go through a shared pointer to ease some memory management issues with a patch I'm working on. The main complication with using SPs for these objects is that most methods that build up an UnwindPlan will construct a Row to a given instruction point in a function, then add additional regsaves in the next instruction point to that row and push it again. A little care is needed to not mutate the previous instruction point's Row once these are switched to being held behing shared pointers. llvm-svn: 160214
2012-07-14 12:52:53 +08:00
UnwindPlan::RowSP
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
UnwindPlan::GetRowForFunctionOffset (int offset) const
{
Switch nearly all of the use of the UnwindPlan::Row's to go through a shared pointer to ease some memory management issues with a patch I'm working on. The main complication with using SPs for these objects is that most methods that build up an UnwindPlan will construct a Row to a given instruction point in a function, then add additional regsaves in the next instruction point to that row and push it again. A little care is needed to not mutate the previous instruction point's Row once these are switched to being held behing shared pointers. llvm-svn: 160214
2012-07-14 12:52:53 +08:00
RowSP row;
Made FuncUnwinders threadsafe. Other small cleanups as well. llvm-svn: 123088
2011-01-09 05:19:00 +08:00
if (!m_row_list.empty())
Check in the native lldb unwinder. Not yet enabled as the default unwinder but there are no known backtrace problems with the code at this point. Added 'log enable lldb unwind' to help diagnose backtrace problems; this output needs a little refining but it's a good first step. eh_frame information is currently read unconditionally - the code is structured to allow this to be delayed until it's actually needed. There is a performance hit when you have to parse the eh_frame information for any largeish executable/library so it's necessary to avoid if possible. It's confusing having both the UnwindPlan::RegisterLocation struct and the RegisterConextLLDB::RegisterLocation struct, I need to rename one of them. The writing of registers isn't done in the RegisterConextLLDB subclass yet; neither is the running of complex DWARF expressions from eh_frame (e.g. used for _sigtramp on Mac OS X). llvm-svn: 117256
2010-10-25 19:12:07 +08:00
{
Made FuncUnwinders threadsafe. Other small cleanups as well. llvm-svn: 123088
2011-01-09 05:19:00 +08:00
if (offset == -1)
Switch nearly all of the use of the UnwindPlan::Row's to go through a shared pointer to ease some memory management issues with a patch I'm working on. The main complication with using SPs for these objects is that most methods that build up an UnwindPlan will construct a Row to a given instruction point in a function, then add additional regsaves in the next instruction point to that row and push it again. A little care is needed to not mutate the previous instruction point's Row once these are switched to being held behing shared pointers. llvm-svn: 160214
2012-07-14 12:52:53 +08:00
row = m_row_list.back();
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
else
{
Made FuncUnwinders threadsafe. Other small cleanups as well. llvm-svn: 123088
2011-01-09 05:19:00 +08:00
collection::const_iterator pos, end = m_row_list.end();
for (pos = m_row_list.begin(); pos != end; ++pos)
{
Switch nearly all of the use of the UnwindPlan::Row's to go through a shared pointer to ease some memory management issues with a patch I'm working on. The main complication with using SPs for these objects is that most methods that build up an UnwindPlan will construct a Row to a given instruction point in a function, then add additional regsaves in the next instruction point to that row and push it again. A little care is needed to not mutate the previous instruction point's Row once these are switched to being held behing shared pointers. llvm-svn: 160214
2012-07-14 12:52:53 +08:00
if ((*pos)->GetOffset() <= offset)
row = *pos;
Made FuncUnwinders threadsafe. Other small cleanups as well. llvm-svn: 123088
2011-01-09 05:19:00 +08:00
else
break;
}
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
}
}
Switch nearly all of the use of the UnwindPlan::Row's to go through a shared pointer to ease some memory management issues with a patch I'm working on. The main complication with using SPs for these objects is that most methods that build up an UnwindPlan will construct a Row to a given instruction point in a function, then add additional regsaves in the next instruction point to that row and push it again. A little care is needed to not mutate the previous instruction point's Row once these are switched to being held behing shared pointers. llvm-svn: 160214
2012-07-14 12:52:53 +08:00
return row;
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
}
bool
UnwindPlan::IsValidRowIndex (uint32_t idx) const
{
return idx < m_row_list.size();
}
Switch nearly all of the use of the UnwindPlan::Row's to go through a shared pointer to ease some memory management issues with a patch I'm working on. The main complication with using SPs for these objects is that most methods that build up an UnwindPlan will construct a Row to a given instruction point in a function, then add additional regsaves in the next instruction point to that row and push it again. A little care is needed to not mutate the previous instruction point's Row once these are switched to being held behing shared pointers. llvm-svn: 160214
2012-07-14 12:52:53 +08:00
const UnwindPlan::RowSP
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
UnwindPlan::GetRowAtIndex (uint32_t idx) const
{
// You must call IsValidRowIndex(idx) first before calling this!!!
Made FuncUnwinders threadsafe. Other small cleanups as well. llvm-svn: 123088
2011-01-09 05:19:00 +08:00
assert (idx < m_row_list.size());
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
return m_row_list[idx];
}
Switch nearly all of the use of the UnwindPlan::Row's to go through a shared pointer to ease some memory management issues with a patch I'm working on. The main complication with using SPs for these objects is that most methods that build up an UnwindPlan will construct a Row to a given instruction point in a function, then add additional regsaves in the next instruction point to that row and push it again. A little care is needed to not mutate the previous instruction point's Row once these are switched to being held behing shared pointers. llvm-svn: 160214
2012-07-14 12:52:53 +08:00
const UnwindPlan::RowSP
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
UnwindPlan::GetLastRow () const
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
{
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
// You must call GetRowCount() first to make sure there is at least one row
assert (!m_row_list.empty());
return m_row_list.back();
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
}
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
int
UnwindPlan::GetRowCount () const
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
{
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
return m_row_list.size ();
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
}
void
UnwindPlan::SetPlanValidAddressRange (const AddressRange& range)
{
Check in the native lldb unwinder. Not yet enabled as the default unwinder but there are no known backtrace problems with the code at this point. Added 'log enable lldb unwind' to help diagnose backtrace problems; this output needs a little refining but it's a good first step. eh_frame information is currently read unconditionally - the code is structured to allow this to be delayed until it's actually needed. There is a performance hit when you have to parse the eh_frame information for any largeish executable/library so it's necessary to avoid if possible. It's confusing having both the UnwindPlan::RegisterLocation struct and the RegisterConextLLDB::RegisterLocation struct, I need to rename one of them. The writing of registers isn't done in the RegisterConextLLDB subclass yet; neither is the running of complex DWARF expressions from eh_frame (e.g. used for _sigtramp on Mac OS X). llvm-svn: 117256
2010-10-25 19:12:07 +08:00
if (range.GetBaseAddress().IsValid() && range.GetByteSize() != 0)
m_plan_valid_address_range = range;
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
}
bool
UnwindPlan::PlanValidAtAddress (Address addr)
{
Check in the native lldb unwinder. Not yet enabled as the default unwinder but there are no known backtrace problems with the code at this point. Added 'log enable lldb unwind' to help diagnose backtrace problems; this output needs a little refining but it's a good first step. eh_frame information is currently read unconditionally - the code is structured to allow this to be delayed until it's actually needed. There is a performance hit when you have to parse the eh_frame information for any largeish executable/library so it's necessary to avoid if possible. It's confusing having both the UnwindPlan::RegisterLocation struct and the RegisterConextLLDB::RegisterLocation struct, I need to rename one of them. The writing of registers isn't done in the RegisterConextLLDB subclass yet; neither is the running of complex DWARF expressions from eh_frame (e.g. used for _sigtramp on Mac OS X). llvm-svn: 117256
2010-10-25 19:12:07 +08:00
if (!m_plan_valid_address_range.GetBaseAddress().IsValid() || m_plan_valid_address_range.GetByteSize() == 0)
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
return true;
Handle the case where no eh_frame section is present. RegisterContextLLDB holds a reference to the SymbolContext in the vector of Cursors that UnwindLLDB maintains. Switch UnwindLLDB to hold a vector of shared pointers of Cursors so this reference doesn't become invalid. Correctly falling back from the "fast" UnwindPlan to the "full" UnwindPlan when additional registers need to be retrieved. llvm-svn: 118218
2010-11-04 08:53:20 +08:00
if (!addr.IsValid())
return true;
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
if (m_plan_valid_address_range.ContainsFileAddress (addr))
return true;
return false;
}
void
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
UnwindPlan::Dump (Stream& s, Thread *thread, lldb::addr_t base_addr) const
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
{
Check in the native lldb unwinder. Not yet enabled as the default unwinder but there are no known backtrace problems with the code at this point. Added 'log enable lldb unwind' to help diagnose backtrace problems; this output needs a little refining but it's a good first step. eh_frame information is currently read unconditionally - the code is structured to allow this to be delayed until it's actually needed. There is a performance hit when you have to parse the eh_frame information for any largeish executable/library so it's necessary to avoid if possible. It's confusing having both the UnwindPlan::RegisterLocation struct and the RegisterConextLLDB::RegisterLocation struct, I need to rename one of them. The writing of registers isn't done in the RegisterConextLLDB subclass yet; neither is the running of complex DWARF expressions from eh_frame (e.g. used for _sigtramp on Mac OS X). llvm-svn: 117256
2010-10-25 19:12:07 +08:00
if (!m_source_name.IsEmpty())
{
s.Printf ("This UnwindPlan originally sourced from %s\n", m_source_name.GetCString());
}
if (m_plan_valid_address_range.GetBaseAddress().IsValid() && m_plan_valid_address_range.GetByteSize() > 0)
{
Made FuncUnwinders threadsafe. Other small cleanups as well. llvm-svn: 123088
2011-01-09 05:19:00 +08:00
s.PutCString ("Address range of this UnwindPlan: ");
Thread hardening part 3. Now lldb_private::Thread objects have std::weak_ptr objects for the backlink to the lldb_private::Process. The issues we were running into before was someone was holding onto a shared pointer to a lldb_private::Thread for too long, and the lldb_private::Process parent object would get destroyed and the lldb_private::Thread had a "Process &m_process" member which would just treat whatever memory that used to be a Process as a valid Process. This was mostly happening for lldb_private::StackFrame objects that had a member like "Thread &m_thread". So this completes the internal strong/weak changes. Documented the ExecutionContext and ExecutionContextRef classes so that our LLDB developers can understand when and where to use ExecutionContext and ExecutionContextRef objects. llvm-svn: 151009
2012-02-21 08:09:25 +08:00
TargetSP target_sp(thread->CalculateTarget());
m_plan_valid_address_range.Dump (&s, target_sp.get(), Address::DumpStyleSectionNameOffset);
Made FuncUnwinders threadsafe. Other small cleanups as well. llvm-svn: 123088
2011-01-09 05:19:00 +08:00
s.EOL();
Check in the native lldb unwinder. Not yet enabled as the default unwinder but there are no known backtrace problems with the code at this point. Added 'log enable lldb unwind' to help diagnose backtrace problems; this output needs a little refining but it's a good first step. eh_frame information is currently read unconditionally - the code is structured to allow this to be delayed until it's actually needed. There is a performance hit when you have to parse the eh_frame information for any largeish executable/library so it's necessary to avoid if possible. It's confusing having both the UnwindPlan::RegisterLocation struct and the RegisterConextLLDB::RegisterLocation struct, I need to rename one of them. The writing of registers isn't done in the RegisterConextLLDB subclass yet; neither is the running of complex DWARF expressions from eh_frame (e.g. used for _sigtramp on Mac OS X). llvm-svn: 117256
2010-10-25 19:12:07 +08:00
}
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
collection::const_iterator pos, begin = m_row_list.begin(), end = m_row_list.end();
for (pos = begin; pos != end; ++pos)
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
{
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
s.Printf ("row[%u]: ", (uint32_t)std::distance (begin, pos));
Switch nearly all of the use of the UnwindPlan::Row's to go through a shared pointer to ease some memory management issues with a patch I'm working on. The main complication with using SPs for these objects is that most methods that build up an UnwindPlan will construct a Row to a given instruction point in a function, then add additional regsaves in the next instruction point to that row and push it again. A little care is needed to not mutate the previous instruction point's Row once these are switched to being held behing shared pointers. llvm-svn: 160214
2012-07-14 12:52:53 +08:00
(*pos)->Dump(s, this, thread, base_addr);
The first part of an lldb native stack unwinder. The Unwind and RegisterContext subclasses still need to be finished; none of this code is used by lldb at this point (unless you call into it by hand). The ObjectFile class now has an UnwindTable object. The UnwindTable object has a series of FuncUnwinders objects (Function Unwinders) -- one for each function in that ObjectFile we've backtraced through during this debug session. The FuncUnwinders object has a few different UnwindPlans. UnwindPlans are a generic way of describing how to find the canonical address of a given function's stack frame (the CFA idea from DWARF/eh_frame) and how to restore the caller frame's register values, if they have been saved by this function. UnwindPlans are created from different sources. One source is the eh_frame exception handling information generated by the compiler for unwinding an exception throw. Another source is an assembly language inspection class (UnwindAssemblyProfiler, uses the Plugin architecture) which looks at the instructions in the funciton prologue and describes the stack movements/register saves that are done. Two additional types of UnwindPlans that are worth noting are the "fast" stack UnwindPlan which is useful for making a first pass over a thread's stack, determining how many stack frames there are and retrieving the pc and CFA values for each frame (enough to create StackFrameIDs). Only a minimal set of registers is recovered during a fast stack walk. The final UnwindPlan is an architectural default unwind plan. These are provided by the ArchDefaultUnwindPlan class (which uses the plugin architecture). When no symbol/function address range can be found for a given pc value -- when we have no eh_frame information and when we don't have a start address so we can't examine the assembly language instrucitons -- we have to make a best guess about how to unwind. That's when we use the architectural default UnwindPlan. On x86_64, this would be to assume that rbp is used as a stack pointer and we can use that to find the caller's frame pointer and pc value. It's a last-ditch best guess about how to unwind out of a frame. There are heuristics about when to use one UnwindPlan versues the other -- this will all happen in the still-begin-written UnwindLLDB subclass of Unwind which runs the UnwindPlans. llvm-svn: 113581
2010-09-10 15:49:16 +08:00
}
}
Check in the native lldb unwinder. Not yet enabled as the default unwinder but there are no known backtrace problems with the code at this point. Added 'log enable lldb unwind' to help diagnose backtrace problems; this output needs a little refining but it's a good first step. eh_frame information is currently read unconditionally - the code is structured to allow this to be delayed until it's actually needed. There is a performance hit when you have to parse the eh_frame information for any largeish executable/library so it's necessary to avoid if possible. It's confusing having both the UnwindPlan::RegisterLocation struct and the RegisterConextLLDB::RegisterLocation struct, I need to rename one of them. The writing of registers isn't done in the RegisterConextLLDB subclass yet; neither is the running of complex DWARF expressions from eh_frame (e.g. used for _sigtramp on Mac OS X). llvm-svn: 117256
2010-10-25 19:12:07 +08:00
void
UnwindPlan::SetSourceName (const char *source)
{
m_source_name = ConstString (source);
}
ConstString
UnwindPlan::GetSourceName () const
{
return m_source_name;
}
Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their respective ABI plugins as they were plug-ins that supplied ABI specfic info. Also hookep up the UnwindAssemblyInstEmulation so that it can generate the unwind plans for ARM. Changed the way ABI plug-ins are handed out when you get an instance from the plug-in manager. They used to return pointers that would be mananged individually by each client that requested them, but now they are handed out as shared pointers since there is no state in the ABI objects, they can be shared. llvm-svn: 131193
2011-05-12 02:39:18 +08:00
const RegisterInfo *
UnwindPlan::GetRegisterInfo (Thread* thread, uint32_t unwind_reg) const
{
if (thread)
{
RegisterContext *reg_ctx = thread->GetRegisterContext().get();
if (reg_ctx)
{
uint32_t reg;
if (m_register_kind == eRegisterKindLLDB)
reg = unwind_reg;
else
reg = reg_ctx->ConvertRegisterKindToRegisterNumber (m_register_kind, unwind_reg);
if (reg != LLDB_INVALID_REGNUM)
return reg_ctx->GetRegisterInfoAtIndex (reg);
}
}
return NULL;
}