maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/lib/Target/PowerPC/PPCLoopPreIncPrep.cpp

377 lines
12 KiB
C++
Raw Normal View History

[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
//===------ PPCLoopPreIncPrep.cpp - Loop Pre-Inc. AM Prep. Pass -----------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file implements a pass to prepare loops for pre-increment addressing
// modes. Additional PHIs are created for loop induction variables used by
// load/store instructions so that the pre-increment forms can be used.
// Generically, this means transforming loops like this:
// for (int i = 0; i < n; ++i)
// array[i] = c;
// to look like this:
// T *p = array[-1];
// for (int i = 0; i < n; ++i)
// *++p = c;
//===----------------------------------------------------------------------===//
#define DEBUG_TYPE "ppc-loop-preinc-prep"
#include "PPC.h"
#include "PPCTargetMachine.h"
Re-sort #include lines using my handy dandy ./utils/sort_includes.py script. This is in preparation for changes to lots of include lines. llvm-svn: 229088
2015-02-13 17:09:03 +08:00
#include "llvm/ADT/STLExtras.h"
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
#include "llvm/ADT/SmallSet.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/Analysis/CodeMetrics.h"
#include "llvm/Analysis/InstructionSimplify.h"
#include "llvm/Analysis/LoopInfo.h"
#include "llvm/Analysis/ScalarEvolution.h"
#include "llvm/Analysis/ScalarEvolutionExpander.h"
#include "llvm/Analysis/ScalarEvolutionExpressions.h"
#include "llvm/Analysis/ValueTracking.h"
#include "llvm/IR/CFG.h"
#include "llvm/IR/Dominators.h"
#include "llvm/IR/Function.h"
#include "llvm/IR/IntrinsicInst.h"
Make DataLayout Non-Optional in the Module Summary: DataLayout keeps the string used for its creation. As a side effect it is no longer needed in the Module. This is "almost" NFC, the string is no longer canonicalized, you can't rely on two "equals" DataLayout having the same string returned by getStringRepresentation(). Get rid of DataLayoutPass: the DataLayout is in the Module The DataLayout is "per-module", let's enforce this by not duplicating it more than necessary. One more step toward non-optionality of the DataLayout in the module. Make DataLayout Non-Optional in the Module Module->getDataLayout() will never returns nullptr anymore. Reviewers: echristo Subscribers: resistor, llvm-commits, jholewinski Differential Revision: http://reviews.llvm.org/D7992 From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 231270
2015-03-05 02:43:29 +08:00
#include "llvm/IR/Module.h"
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
Re-sort #include lines using my handy dandy ./utils/sort_includes.py script. This is in preparation for changes to lots of include lines. llvm-svn: 229088
2015-02-13 17:09:03 +08:00
#include "llvm/Transforms/Scalar.h"
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
#include "llvm/Transforms/Utils/BasicBlockUtils.h"
#include "llvm/Transforms/Utils/Local.h"
[PowerPC] Handle loop predecessor invokes If a loop predecessor has an invoke as its terminator, and the return value from that invoke is used to determine the loop iteration space, then we can't insert a computation based on that value in the loop predecessor prior to the terminator (oops). If there's such an invoke, or just no predecessor for that matter, insert a new loop preheader. llvm-svn: 228488
2015-02-07 15:32:58 +08:00
#include "llvm/Transforms/Utils/LoopUtils.h"
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
#include "llvm/Transforms/Utils/ValueMapper.h"
using namespace llvm;
// By default, we limit this to creating 16 PHIs (which is a little over half
// of the allocatable register set).
static cl::opt<unsigned> MaxVars("ppc-preinc-prep-max-vars",
cl::Hidden, cl::init(16),
cl::desc("Potential PHI threshold for PPC preinc loop prep"));
namespace llvm {
void initializePPCLoopPreIncPrepPass(PassRegistry&);
}
namespace {
class PPCLoopPreIncPrep : public FunctionPass {
public:
static char ID; // Pass ID, replacement for typeid
PPCLoopPreIncPrep() : FunctionPass(ID), TM(nullptr) {
initializePPCLoopPreIncPrepPass(*PassRegistry::getPassRegistry());
}
PPCLoopPreIncPrep(PPCTargetMachine &TM) : FunctionPass(ID), TM(&TM) {
initializePPCLoopPreIncPrepPass(*PassRegistry::getPassRegistry());
}
void getAnalysisUsage(AnalysisUsage &AU) const override {
AU.addPreserved<DominatorTreeWrapperPass>();
AU.addRequired<LoopInfoWrapperPass>();
AU.addPreserved<LoopInfoWrapperPass>();
AU.addRequired<ScalarEvolution>();
}
bool runOnFunction(Function &F) override;
bool runOnLoop(Loop *L);
void simplifyLoopLatch(Loop *L);
bool rotateLoop(Loop *L);
private:
PPCTargetMachine *TM;
LoopInfo *LI;
ScalarEvolution *SE;
};
}
char PPCLoopPreIncPrep::ID = 0;
Make helper functions/classes/globals static. NFC. llvm-svn: 228410
2015-02-07 01:51:54 +08:00
static const char *name = "Prepare loop for pre-inc. addressing modes";
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
INITIALIZE_PASS_BEGIN(PPCLoopPreIncPrep, DEBUG_TYPE, name, false, false)
INITIALIZE_PASS_DEPENDENCY(LoopInfoWrapperPass)
INITIALIZE_PASS_DEPENDENCY(ScalarEvolution)
INITIALIZE_PASS_END(PPCLoopPreIncPrep, DEBUG_TYPE, name, false, false)
FunctionPass *llvm::createPPCLoopPreIncPrepPass(PPCTargetMachine &TM) {
return new PPCLoopPreIncPrep(TM);
}
namespace {
struct SCEVLess : std::binary_function<const SCEV *, const SCEV *, bool>
{
SCEVLess(ScalarEvolution *SE) : SE(SE) {}
bool operator() (const SCEV *X, const SCEV *Y) const {
const SCEV *Diff = SE->getMinusSCEV(X, Y);
return cast<SCEVConstant>(Diff)->getValue()->getSExtValue() < 0;
}
protected:
ScalarEvolution *SE;
};
}
static bool IsPtrInBounds(Value *BasePtr) {
Value *StrippedBasePtr = BasePtr;
while (BitCastInst *BC = dyn_cast<BitCastInst>(StrippedBasePtr))
StrippedBasePtr = BC->getOperand(0);
if (GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(StrippedBasePtr))
return GEP->isInBounds();
return false;
}
static Value *GetPointerOperand(Value *MemI) {
if (LoadInst *LMemI = dyn_cast<LoadInst>(MemI)) {
return LMemI->getPointerOperand();
} else if (StoreInst *SMemI = dyn_cast<StoreInst>(MemI)) {
return SMemI->getPointerOperand();
} else if (IntrinsicInst *IMemI = dyn_cast<IntrinsicInst>(MemI)) {
if (IMemI->getIntrinsicID() == Intrinsic::prefetch)
return IMemI->getArgOperand(0);
}
return 0;
}
bool PPCLoopPreIncPrep::runOnFunction(Function &F) {
LI = &getAnalysis<LoopInfoWrapperPass>().getLoopInfo();
SE = &getAnalysis<ScalarEvolution>();
bool MadeChange = false;
for (LoopInfo::iterator I = LI->begin(), E = LI->end();
I != E; ++I) {
Loop *L = *I;
MadeChange |= runOnLoop(L);
}
return MadeChange;
}
bool PPCLoopPreIncPrep::runOnLoop(Loop *L) {
bool MadeChange = false;
// Only prep. the inner-most loop
if (!L->empty())
return MadeChange;
BasicBlock *Header = L->getHeader();
const PPCSubtarget *ST =
TM ? TM->getSubtargetImpl(*Header->getParent()) : nullptr;
unsigned HeaderLoopPredCount = 0;
for (pred_iterator PI = pred_begin(Header), PE = pred_end(Header);
PI != PE; ++PI) {
++HeaderLoopPredCount;
}
// Collect buckets of comparable addresses used by loads and stores.
typedef std::multimap<const SCEV *, Instruction *, SCEVLess> Bucket;
SmallVector<Bucket, 16> Buckets;
for (Loop::block_iterator I = L->block_begin(), IE = L->block_end();
I != IE; ++I) {
for (BasicBlock::iterator J = (*I)->begin(), JE = (*I)->end();
J != JE; ++J) {
Value *PtrValue;
Instruction *MemI;
if (LoadInst *LMemI = dyn_cast<LoadInst>(J)) {
MemI = LMemI;
PtrValue = LMemI->getPointerOperand();
} else if (StoreInst *SMemI = dyn_cast<StoreInst>(J)) {
MemI = SMemI;
PtrValue = SMemI->getPointerOperand();
} else if (IntrinsicInst *IMemI = dyn_cast<IntrinsicInst>(J)) {
if (IMemI->getIntrinsicID() == Intrinsic::prefetch) {
MemI = IMemI;
PtrValue = IMemI->getArgOperand(0);
} else continue;
} else continue;
unsigned PtrAddrSpace = PtrValue->getType()->getPointerAddressSpace();
if (PtrAddrSpace)
continue;
// There are no update forms for Altivec vector load/stores.
if (ST && ST->hasAltivec() &&
PtrValue->getType()->getPointerElementType()->isVectorTy())
continue;
if (L->isLoopInvariant(PtrValue))
continue;
const SCEV *LSCEV = SE->getSCEV(PtrValue);
if (!isa<SCEVAddRecExpr>(LSCEV))
continue;
bool FoundBucket = false;
for (unsigned i = 0, e = Buckets.size(); i != e; ++i)
for (Bucket::iterator K = Buckets[i].begin(), KE = Buckets[i].end();
K != KE; ++K) {
const SCEV *Diff = SE->getMinusSCEV(K->first, LSCEV);
if (isa<SCEVConstant>(Diff)) {
Buckets[i].insert(std::make_pair(LSCEV, MemI));
FoundBucket = true;
break;
}
}
if (!FoundBucket) {
Buckets.push_back(Bucket(SCEVLess(SE)));
Buckets[Buckets.size()-1].insert(std::make_pair(LSCEV, MemI));
}
}
}
[PowerPC] Handle loop predecessor invokes If a loop predecessor has an invoke as its terminator, and the return value from that invoke is used to determine the loop iteration space, then we can't insert a computation based on that value in the loop predecessor prior to the terminator (oops). If there's such an invoke, or just no predecessor for that matter, insert a new loop preheader. llvm-svn: 228488
2015-02-07 15:32:58 +08:00
if (Buckets.empty() || Buckets.size() > MaxVars)
return MadeChange;
BasicBlock *LoopPredecessor = L->getLoopPredecessor();
// If there is no loop predecessor, or the loop predecessor's terminator
// returns a value (which might contribute to determining the loop's
// iteration space), insert a new preheader for the loop.
if (!LoopPredecessor ||
!LoopPredecessor->getTerminator()->getType()->isVoidTy())
LoopPredecessor = InsertPreheaderForLoop(L, this);
if (!LoopPredecessor)
[PowerPC] Prepare loops for pre-increment loads/stores PowerPC supports pre-increment load/store instructions (except for Altivec/VSX vector load/stores). Using these on embedded cores can be very important, but most loops are not naturally set up to use them. We can often change that, however, by placing loops into a non-canonical form. Generically, this means transforming loops like this: for (int i = 0; i < n; ++i) array[i] = c; to look like this: T *p = array[-1]; for (int i = 0; i < n; ++i) *++p = c; the key point is that addresses accessed are pulled into dedicated PHIs and "pre-decremented" in the loop preheader. This allows the use of pre-increment load/store instructions without loop peeling. A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is introduced to perform this transformation. I've used this code out-of-tree for generating code for the PPC A2 for over a year. Somewhat to my surprise, running the test suite + externals on a P7 with this transformation enabled showed no performance regressions, and one speedup: External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk -2.32514% +/- 1.03736% So I'm going to enable it on everything for now. I was surprised by this because, on the POWER cores, these pre-increment load/store instructions are cracked (and, thus, harder to schedule effectively). But seeing no regressions, and feeling that it is generally easier to split instructions apart late than it is to combine them late, this might be the better approach regardless. In the future, we might want to integrate this functionality into LSR (but currently LSR does not create new PHI nodes, so (for that and other reasons) significant work would need to be done). llvm-svn: 228328
2015-02-06 02:43:00 +08:00
return MadeChange;
SmallSet<BasicBlock *, 16> BBChanged;
for (unsigned i = 0, e = Buckets.size(); i != e; ++i) {
// The base address of each bucket is transformed into a phi and the others
// are rewritten as offsets of that variable.
const SCEVAddRecExpr *BasePtrSCEV =
cast<SCEVAddRecExpr>(Buckets[i].begin()->first);
if (!BasePtrSCEV->isAffine())
continue;
Instruction *MemI = Buckets[i].begin()->second;
Value *BasePtr = GetPointerOperand(MemI);
assert(BasePtr && "No pointer operand");
Type *I8PtrTy = Type::getInt8PtrTy(MemI->getParent()->getContext(),
BasePtr->getType()->getPointerAddressSpace());
const SCEV *BasePtrStartSCEV = BasePtrSCEV->getStart();
if (!SE->isLoopInvariant(BasePtrStartSCEV, L))
continue;
const SCEVConstant *BasePtrIncSCEV =
dyn_cast<SCEVConstant>(BasePtrSCEV->getStepRecurrence(*SE));
if (!BasePtrIncSCEV)
continue;
BasePtrStartSCEV = SE->getMinusSCEV(BasePtrStartSCEV, BasePtrIncSCEV);
if (!isSafeToExpand(BasePtrStartSCEV, *SE))
continue;
PHINode *NewPHI = PHINode::Create(I8PtrTy, HeaderLoopPredCount,
MemI->hasName() ? MemI->getName() + ".phi" : "",
Header->getFirstNonPHI());
SCEVExpander SCEVE(*SE, "pistart");
Value *BasePtrStart = SCEVE.expandCodeFor(BasePtrStartSCEV, I8PtrTy,
LoopPredecessor->getTerminator());
// Note that LoopPredecessor might occur in the predecessor list multiple
// times, and we need to add it the right number of times.
for (pred_iterator PI = pred_begin(Header), PE = pred_end(Header);
PI != PE; ++PI) {
if (*PI != LoopPredecessor)
continue;
NewPHI->addIncoming(BasePtrStart, LoopPredecessor);
}
Instruction *InsPoint = Header->getFirstInsertionPt();
GetElementPtrInst *PtrInc =
GetElementPtrInst::Create(NewPHI, BasePtrIncSCEV->getValue(),
MemI->hasName() ? MemI->getName() + ".inc" : "", InsPoint);
PtrInc->setIsInBounds(IsPtrInBounds(BasePtr));
for (pred_iterator PI = pred_begin(Header), PE = pred_end(Header);
PI != PE; ++PI) {
if (*PI == LoopPredecessor)
continue;
NewPHI->addIncoming(PtrInc, *PI);
}
Instruction *NewBasePtr;
if (PtrInc->getType() != BasePtr->getType())
NewBasePtr = new BitCastInst(PtrInc, BasePtr->getType(),
PtrInc->hasName() ? PtrInc->getName() + ".cast" : "", InsPoint);
else
NewBasePtr = PtrInc;
if (Instruction *IDel = dyn_cast<Instruction>(BasePtr))
BBChanged.insert(IDel->getParent());
BasePtr->replaceAllUsesWith(NewBasePtr);
RecursivelyDeleteTriviallyDeadInstructions(BasePtr);
Value *LastNewPtr = NewBasePtr;
for (Bucket::iterator I = std::next(Buckets[i].begin()),
IE = Buckets[i].end(); I != IE; ++I) {
Value *Ptr = GetPointerOperand(I->second);
assert(Ptr && "No pointer operand");
if (Ptr == LastNewPtr)
continue;
Instruction *RealNewPtr;
const SCEVConstant *Diff =
cast<SCEVConstant>(SE->getMinusSCEV(I->first, BasePtrSCEV));
if (Diff->isZero()) {
RealNewPtr = NewBasePtr;
} else {
Instruction *PtrIP = dyn_cast<Instruction>(Ptr);
if (PtrIP && isa<Instruction>(NewBasePtr) &&
cast<Instruction>(NewBasePtr)->getParent() == PtrIP->getParent())
PtrIP = 0;
else if (isa<PHINode>(PtrIP))
PtrIP = PtrIP->getParent()->getFirstInsertionPt();
else if (!PtrIP)
PtrIP = I->second;
GetElementPtrInst *NewPtr =
GetElementPtrInst::Create(PtrInc, Diff->getValue(),
I->second->hasName() ? I->second->getName() + ".off" : "", PtrIP);
if (!PtrIP)
NewPtr->insertAfter(cast<Instruction>(PtrInc));
NewPtr->setIsInBounds(IsPtrInBounds(Ptr));
RealNewPtr = NewPtr;
}
if (Instruction *IDel = dyn_cast<Instruction>(Ptr))
BBChanged.insert(IDel->getParent());
Instruction *ReplNewPtr;
if (Ptr->getType() != RealNewPtr->getType()) {
ReplNewPtr = new BitCastInst(RealNewPtr, Ptr->getType(),
Ptr->hasName() ? Ptr->getName() + ".cast" : "");
ReplNewPtr->insertAfter(RealNewPtr);
} else
ReplNewPtr = RealNewPtr;
Ptr->replaceAllUsesWith(ReplNewPtr);
RecursivelyDeleteTriviallyDeadInstructions(Ptr);
LastNewPtr = RealNewPtr;
}
MadeChange = true;
}
for (Loop::block_iterator I = L->block_begin(), IE = L->block_end();
I != IE; ++I) {
if (BBChanged.count(*I))
DeleteDeadPHIs(*I);
}
return MadeChange;
}