llvm-project/llvm/lib/Target/RISCV/RISCVInstrInfoVPseudos.td

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

4419 lines
180 KiB
TableGen
Raw Normal View History

[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
//===-- RISCVInstrInfoVPseudos.td - RISC-V 'V' Pseudos -----*- tablegen -*-===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
///
/// This file contains the required infrastructure to support code generation
/// for the standard 'V' (Vector) extension, version 0.9. This version is still
/// experimental as the 'V' extension hasn't been ratified yet.
///
/// This file is included from RISCVInstrInfoV.td
///
//===----------------------------------------------------------------------===//
def riscv_vmv_x_s : SDNode<"RISCVISD::VMV_X_S",
SDTypeProfile<1, 1, [SDTCisInt<0>, SDTCisVec<1>,
SDTCisInt<1>]>>;
def riscv_read_vlenb : SDNode<"RISCVISD::READ_VLENB",
SDTypeProfile<1, 0, [SDTCisVT<0, XLenVT>]>>;
def riscv_vleff : SDNode<"RISCVISD::VLEFF",
SDTypeProfile<1, 2, [SDTCisVec<0>, SDTCisPtrTy<1>,
SDTCisVT<2, XLenVT>]>,
[SDNPHasChain, SDNPOutGlue, SDNPMayLoad,
SDNPSideEffect]>;
def riscv_vleff_mask : SDNode<"RISCVISD::VLEFF_MASK",
SDTypeProfile<1, 4, [SDTCisVec<0>,
SDTCisSameAs<0, 1>,
SDTCisPtrTy<2>,
SDTCVecEltisVT<3, i1>,
SDTCisVT<4, XLenVT>]>,
[SDNPHasChain, SDNPOutGlue, SDNPMayLoad,
SDNPSideEffect]>;
def riscv_read_vl : SDNode<"RISCVISD::READ_VL",
SDTypeProfile<1, 0, [SDTCisVT<0, XLenVT>]>,
[SDNPInGlue]>;
// X0 has special meaning for vsetvl/vsetvli.
// rd | rs1 | AVL value | Effect on vl
//--------------------------------------------------------------
// !X0 | X0 | VLMAX | Set vl to VLMAX
// X0 | X0 | Value in vl | Keep current vl, just change vtype.
def NoX0 : SDNodeXForm<undef,
[{
auto *C = dyn_cast<ConstantSDNode>(N);
if (C && C->isNullValue()) {
SDLoc DL(N);
return SDValue(CurDAG->getMachineNode(RISCV::ADDI, DL, Subtarget->getXLenVT(),
CurDAG->getRegister(RISCV::X0, Subtarget->getXLenVT()),
CurDAG->getTargetConstant(0, DL, Subtarget->getXLenVT())), 0);
}
return SDValue(N, 0);
}]>;
def DecImm : SDNodeXForm<imm, [{
return CurDAG->getTargetConstant(N->getSExtValue() - 1, SDLoc(N),
N->getValueType(0));
}]>;
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
//===----------------------------------------------------------------------===//
// Utilities.
//===----------------------------------------------------------------------===//
// This class describes information associated to the LMUL.
class LMULInfo<int lmul, VReg regclass, VReg wregclass,
VReg f2regclass, VReg f4regclass, VReg f8regclass, string mx> {
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
bits<3> value = lmul; // This is encoded as the vlmul field of vtype.
VReg vrclass = regclass;
VReg wvrclass = wregclass;
VReg f8vrclass = f8regclass;
VReg f4vrclass = f4regclass;
VReg f2vrclass = f2regclass;
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
string MX = mx;
}
// Associate LMUL with tablegen records of register classes.
def V_M1 : LMULInfo<0b000, VR, VRM2, VR, VR, VR, "M1">;
def V_M2 : LMULInfo<0b001, VRM2, VRM4, VR, VR, VR, "M2">;
def V_M4 : LMULInfo<0b010, VRM4, VRM8, VRM2, VR, VR, "M4">;
def V_M8 : LMULInfo<0b011, VRM8,/*NoVReg*/VR, VRM4, VRM2, VR, "M8">;
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
def V_MF8 : LMULInfo<0b101, VR, VR,/*NoVReg*/VR,/*NoVReg*/VR,/*NoVReg*/VR, "MF8">;
def V_MF4 : LMULInfo<0b110, VR, VR, VR,/*NoVReg*/VR,/*NoVReg*/VR, "MF4">;
def V_MF2 : LMULInfo<0b111, VR, VR, VR, VR,/*NoVReg*/VR, "MF2">;
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
// Used to iterate over all possible LMULs.
def MxList {
list<LMULInfo> m = [V_MF8, V_MF4, V_MF2, V_M1, V_M2, V_M4, V_M8];
}
class FPR_Info<RegisterClass regclass, string fx> {
RegisterClass fprclass = regclass;
string FX = fx;
}
def SCALAR_F16 : FPR_Info<FPR16, "F16">;
def SCALAR_F32 : FPR_Info<FPR32, "F32">;
def SCALAR_F64 : FPR_Info<FPR64, "F64">;
def FPList {
list<FPR_Info> fpinfo = [SCALAR_F16, SCALAR_F32, SCALAR_F64];
}
class getScalarSuffix<ValueType type> {
string suffix = !cond(!eq(type, XLenVT): "VX",
!eq(type, f16): "VF_F16",
!eq(type, f32): "VF_F32",
!eq(type, f64): "VF_F64");
}
class getWScalarSuffix<ValueType type> {
string suffix = !cond(!eq(type, XLenVT): "WX",
!eq(type, f16): "WF_F16",
!eq(type, f32): "WF_F32",
!eq(type, f64): "WF_F64");
}
class MxSet<int eew> {
list<LMULInfo> m = !cond(!eq(eew, 8) : [V_MF8, V_MF4, V_MF2, V_M1, V_M2, V_M4, V_M8],
!eq(eew, 16) : [V_MF4, V_MF2, V_M1, V_M2, V_M4, V_M8],
!eq(eew, 32) : [V_MF2, V_M1, V_M2, V_M4, V_M8],
!eq(eew, 64) : [V_M1, V_M2, V_M4, V_M8]);
}
class NFSet<LMULInfo m> {
list<int> L = !cond(!eq(m.value, V_M8.value): [],
!eq(m.value, V_M4.value): [2],
!eq(m.value, V_M2.value): [2, 3, 4],
true: [2, 3, 4, 5, 6, 7, 8]);
}
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
class shift_amount<int num> {
int val = !if(!eq(num, 1), 0, !add(1, shift_amount<!srl(num, 1)>.val));
}
class octuple_from_str<string MX> {
int ret = !cond(!eq(MX, "MF8") : 1,
!eq(MX, "MF4") : 2,
!eq(MX, "MF2") : 4,
!eq(MX, "M1") : 8,
!eq(MX, "M2") : 16,
!eq(MX, "M4") : 32,
!eq(MX, "M8") : 64);
}
class octuple_to_str<int octuple> {
string ret = !if(!eq(octuple, 1), "MF8",
!if(!eq(octuple, 2), "MF4",
!if(!eq(octuple, 4), "MF2",
!if(!eq(octuple, 8), "M1",
!if(!eq(octuple, 16), "M2",
!if(!eq(octuple, 32), "M4",
!if(!eq(octuple, 64), "M8",
"NoDef")))))));
}
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
// Output pattern for X0 used to represent VLMAX in the pseudo instructions.
def VLMax : OutPatFrag<(ops), (XLenVT X0)>;
// List of EEW.
defvar EEWList = [8, 16, 32, 64];
class SegRegClass<LMULInfo m, int nf> {
VReg RC = !cast<VReg>("VRN" # nf # !cond(!eq(m.value, V_MF8.value): V_M1.MX,
!eq(m.value, V_MF4.value): V_M1.MX,
!eq(m.value, V_MF2.value): V_M1.MX,
true: m.MX));
}
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
//===----------------------------------------------------------------------===//
// Vector register and vector group type information.
//===----------------------------------------------------------------------===//
class VTypeInfo<ValueType Vec, ValueType Mas, int Sew, VReg Reg, LMULInfo M,
ValueType Scal = XLenVT, RegisterClass ScalarReg = GPR>
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
{
ValueType Vector = Vec;
ValueType Mask = Mas;
int SEW = Sew;
VReg RegClass = Reg;
LMULInfo LMul = M;
ValueType Scalar = Scal;
RegisterClass ScalarRegClass = ScalarReg;
// The pattern fragment which produces the AVL operand, representing the
// "natural" vector length for this type. For scalable vectors this is VLMax.
OutPatFrag AVL = VLMax;
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
}
class GroupVTypeInfo<ValueType Vec, ValueType VecM1, ValueType Mas, int Sew,
VReg Reg, LMULInfo M, ValueType Scal = XLenVT,
RegisterClass ScalarReg = GPR>
: VTypeInfo<Vec, Mas, Sew, Reg, M, Scal, ScalarReg>
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
{
ValueType VectorM1 = VecM1;
}
defset list<VTypeInfo> AllVectors = {
defset list<VTypeInfo> AllIntegerVectors = {
defset list<VTypeInfo> NoGroupIntegerVectors = {
def VI8MF8: VTypeInfo<vint8mf8_t, vbool64_t, 8, VR, V_MF8>;
def VI8MF4: VTypeInfo<vint8mf4_t, vbool32_t, 8, VR, V_MF4>;
def VI8MF2: VTypeInfo<vint8mf2_t, vbool16_t, 8, VR, V_MF2>;
def VI8M1: VTypeInfo<vint8m1_t, vbool8_t, 8, VR, V_M1>;
def VI16MF4: VTypeInfo<vint16mf4_t, vbool64_t, 16, VR, V_MF4>;
def VI16MF2: VTypeInfo<vint16mf2_t, vbool32_t, 16, VR, V_MF2>;
def VI16M1: VTypeInfo<vint16m1_t, vbool16_t, 16, VR, V_M1>;
def VI32MF2: VTypeInfo<vint32mf2_t, vbool64_t, 32, VR, V_MF2>;
def VI32M1: VTypeInfo<vint32m1_t, vbool32_t, 32, VR, V_M1>;
def VI64M1: VTypeInfo<vint64m1_t, vbool64_t, 64, VR, V_M1>;
}
defset list<GroupVTypeInfo> GroupIntegerVectors = {
def VI8M2: GroupVTypeInfo<vint8m2_t, vint8m1_t, vbool4_t, 8, VRM2, V_M2>;
def VI8M4: GroupVTypeInfo<vint8m4_t, vint8m1_t, vbool2_t, 8, VRM4, V_M4>;
def VI8M8: GroupVTypeInfo<vint8m8_t, vint8m1_t, vbool1_t, 8, VRM8, V_M8>;
def VI16M2: GroupVTypeInfo<vint16m2_t,vint16m1_t,vbool8_t, 16,VRM2, V_M2>;
def VI16M4: GroupVTypeInfo<vint16m4_t,vint16m1_t,vbool4_t, 16,VRM4, V_M4>;
def VI16M8: GroupVTypeInfo<vint16m8_t,vint16m1_t,vbool2_t, 16,VRM8, V_M8>;
def VI32M2: GroupVTypeInfo<vint32m2_t,vint32m1_t,vbool16_t,32,VRM2, V_M2>;
def VI32M4: GroupVTypeInfo<vint32m4_t,vint32m1_t,vbool8_t, 32,VRM4, V_M4>;
def VI32M8: GroupVTypeInfo<vint32m8_t,vint32m1_t,vbool4_t, 32,VRM8, V_M8>;
def VI64M2: GroupVTypeInfo<vint64m2_t,vint64m1_t,vbool32_t,64,VRM2, V_M2>;
def VI64M4: GroupVTypeInfo<vint64m4_t,vint64m1_t,vbool16_t,64,VRM4, V_M4>;
def VI64M8: GroupVTypeInfo<vint64m8_t,vint64m1_t,vbool8_t, 64,VRM8, V_M8>;
}
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
}
defset list<VTypeInfo> AllFloatVectors = {
defset list<VTypeInfo> NoGroupFloatVectors = {
def VF16MF4: VTypeInfo<vfloat16mf4_t, vbool64_t, 16, VR, V_MF4, f16, FPR16>;
def VF16MF2: VTypeInfo<vfloat16mf2_t, vbool32_t, 16, VR, V_MF2, f16, FPR16>;
def VF16M1: VTypeInfo<vfloat16m1_t, vbool16_t, 16, VR, V_M1, f16, FPR16>;
def VF32MF2: VTypeInfo<vfloat32mf2_t,vbool64_t, 32, VR, V_MF2, f32, FPR32>;
def VF32M1: VTypeInfo<vfloat32m1_t, vbool32_t, 32, VR, V_M1, f32, FPR32>;
def VF64M1: VTypeInfo<vfloat64m1_t, vbool64_t, 64, VR, V_M1, f64, FPR64>;
}
defset list<GroupVTypeInfo> GroupFloatVectors = {
def VF16M2: GroupVTypeInfo<vfloat16m2_t, vfloat16m1_t, vbool8_t, 16,
VRM2, V_M2, f16, FPR16>;
def VF16M4: GroupVTypeInfo<vfloat16m4_t, vfloat16m1_t, vbool4_t, 16,
VRM4, V_M4, f16, FPR16>;
def VF16M8: GroupVTypeInfo<vfloat16m8_t, vfloat16m1_t, vbool2_t, 16,
VRM8, V_M8, f16, FPR16>;
def VF32M2: GroupVTypeInfo<vfloat32m2_t, vfloat32m1_t, vbool16_t, 32,
VRM2, V_M2, f32, FPR32>;
def VF32M4: GroupVTypeInfo<vfloat32m4_t, vfloat32m1_t, vbool8_t, 32,
VRM4, V_M4, f32, FPR32>;
def VF32M8: GroupVTypeInfo<vfloat32m8_t, vfloat32m1_t, vbool4_t, 32,
VRM8, V_M8, f32, FPR32>;
def VF64M2: GroupVTypeInfo<vfloat64m2_t, vfloat64m1_t, vbool32_t, 64,
VRM2, V_M2, f64, FPR64>;
def VF64M4: GroupVTypeInfo<vfloat64m4_t, vfloat64m1_t, vbool16_t, 64,
VRM4, V_M4, f64, FPR64>;
def VF64M8: GroupVTypeInfo<vfloat64m8_t, vfloat64m1_t, vbool8_t, 64,
VRM8, V_M8, f64, FPR64>;
}
}
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
}
// This functor is used to obtain the int vector type that has the same SEW and
// multiplier as the input parameter type
class GetIntVTypeInfo<VTypeInfo vti>
{
// Equivalent integer vector type. Eg.
// VI8M1 → VI8M1 (identity)
// VF64M4 → VI64M4
VTypeInfo Vti = !cast<VTypeInfo>(!subst("VF", "VI", !cast<string>(vti)));
}
class MTypeInfo<ValueType Mas, LMULInfo M, string Bx> {
ValueType Mask = Mas;
// {SEW, VLMul} values set a valid VType to deal with this mask type.
// we assume SEW=8 and set corresponding LMUL.
int SEW = 8;
LMULInfo LMul = M;
string BX = Bx; // Appendix of mask operations.
// The pattern fragment which produces the AVL operand, representing the
// "natural" vector length for this mask type. For scalable masks this is
// VLMax.
OutPatFrag AVL = VLMax;
}
defset list<MTypeInfo> AllMasks = {
// vbool<n>_t, <n> = SEW/LMUL, we assume SEW=8 and corresponding LMUL.
def : MTypeInfo<vbool64_t, V_MF8, "B1">;
def : MTypeInfo<vbool32_t, V_MF4, "B2">;
def : MTypeInfo<vbool16_t, V_MF2, "B4">;
def : MTypeInfo<vbool8_t, V_M1, "B8">;
def : MTypeInfo<vbool4_t, V_M2, "B16">;
def : MTypeInfo<vbool2_t, V_M4, "B32">;
def : MTypeInfo<vbool1_t, V_M8, "B64">;
}
class VTypeInfoToWide<VTypeInfo vti, VTypeInfo wti>
{
VTypeInfo Vti = vti;
VTypeInfo Wti = wti;
}
class VTypeInfoToFraction<VTypeInfo vti, VTypeInfo fti>
{
VTypeInfo Vti = vti;
VTypeInfo Fti = fti;
}
defset list<VTypeInfoToWide> AllWidenableIntVectors = {
def : VTypeInfoToWide<VI8MF8, VI16MF4>;
def : VTypeInfoToWide<VI8MF4, VI16MF2>;
def : VTypeInfoToWide<VI8MF2, VI16M1>;
def : VTypeInfoToWide<VI8M1, VI16M2>;
def : VTypeInfoToWide<VI8M2, VI16M4>;
def : VTypeInfoToWide<VI8M4, VI16M8>;
def : VTypeInfoToWide<VI16MF4, VI32MF2>;
def : VTypeInfoToWide<VI16MF2, VI32M1>;
def : VTypeInfoToWide<VI16M1, VI32M2>;
def : VTypeInfoToWide<VI16M2, VI32M4>;
def : VTypeInfoToWide<VI16M4, VI32M8>;
def : VTypeInfoToWide<VI32MF2, VI64M1>;
def : VTypeInfoToWide<VI32M1, VI64M2>;
def : VTypeInfoToWide<VI32M2, VI64M4>;
def : VTypeInfoToWide<VI32M4, VI64M8>;
}
defset list<VTypeInfoToWide> AllWidenableFloatVectors = {
def : VTypeInfoToWide<VF16MF4, VF32MF2>;
def : VTypeInfoToWide<VF16MF2, VF32M1>;
def : VTypeInfoToWide<VF16M1, VF32M2>;
def : VTypeInfoToWide<VF16M2, VF32M4>;
def : VTypeInfoToWide<VF16M4, VF32M8>;
def : VTypeInfoToWide<VF32MF2, VF64M1>;
def : VTypeInfoToWide<VF32M1, VF64M2>;
def : VTypeInfoToWide<VF32M2, VF64M4>;
def : VTypeInfoToWide<VF32M4, VF64M8>;
}
defset list<VTypeInfoToFraction> AllFractionableVF2IntVectors = {
def : VTypeInfoToFraction<VI16MF4, VI8MF8>;
def : VTypeInfoToFraction<VI16MF2, VI8MF4>;
def : VTypeInfoToFraction<VI16M1, VI8MF2>;
def : VTypeInfoToFraction<VI16M2, VI8M1>;
def : VTypeInfoToFraction<VI16M4, VI8M2>;
def : VTypeInfoToFraction<VI16M8, VI8M4>;
def : VTypeInfoToFraction<VI32MF2, VI16MF4>;
def : VTypeInfoToFraction<VI32M1, VI16MF2>;
def : VTypeInfoToFraction<VI32M2, VI16M1>;
def : VTypeInfoToFraction<VI32M4, VI16M2>;
def : VTypeInfoToFraction<VI32M8, VI16M4>;
def : VTypeInfoToFraction<VI64M1, VI32MF2>;
def : VTypeInfoToFraction<VI64M2, VI32M1>;
def : VTypeInfoToFraction<VI64M4, VI32M2>;
def : VTypeInfoToFraction<VI64M8, VI32M4>;
}
defset list<VTypeInfoToFraction> AllFractionableVF4IntVectors = {
def : VTypeInfoToFraction<VI32MF2, VI8MF8>;
def : VTypeInfoToFraction<VI32M1, VI8MF4>;
def : VTypeInfoToFraction<VI32M2, VI8MF2>;
def : VTypeInfoToFraction<VI32M4, VI8M1>;
def : VTypeInfoToFraction<VI32M8, VI8M2>;
def : VTypeInfoToFraction<VI64M1, VI16MF4>;
def : VTypeInfoToFraction<VI64M2, VI16MF2>;
def : VTypeInfoToFraction<VI64M4, VI16M1>;
def : VTypeInfoToFraction<VI64M8, VI16M2>;
}
defset list<VTypeInfoToFraction> AllFractionableVF8IntVectors = {
def : VTypeInfoToFraction<VI64M1, VI8MF8>;
def : VTypeInfoToFraction<VI64M2, VI8MF4>;
def : VTypeInfoToFraction<VI64M4, VI8MF2>;
def : VTypeInfoToFraction<VI64M8, VI8M1>;
}
defset list<VTypeInfoToWide> AllWidenableIntToFloatVectors = {
def : VTypeInfoToWide<VI8MF8, VF16MF4>;
def : VTypeInfoToWide<VI8MF4, VF16MF2>;
def : VTypeInfoToWide<VI8MF2, VF16M1>;
def : VTypeInfoToWide<VI8M1, VF16M2>;
def : VTypeInfoToWide<VI8M2, VF16M4>;
def : VTypeInfoToWide<VI8M4, VF16M8>;
def : VTypeInfoToWide<VI16MF4, VF32MF2>;
def : VTypeInfoToWide<VI16MF2, VF32M1>;
def : VTypeInfoToWide<VI16M1, VF32M2>;
def : VTypeInfoToWide<VI16M2, VF32M4>;
def : VTypeInfoToWide<VI16M4, VF32M8>;
def : VTypeInfoToWide<VI32MF2, VF64M1>;
def : VTypeInfoToWide<VI32M1, VF64M2>;
def : VTypeInfoToWide<VI32M2, VF64M4>;
def : VTypeInfoToWide<VI32M4, VF64M8>;
}
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
// This class holds the record of the RISCVVPseudoTable below.
// This represents the information we need in codegen for each pseudo.
// The definition should be consistent with `struct PseudoInfo` in
// RISCVBaseInfo.h.
class CONST8b<bits<8> val> {
bits<8> V = val;
}
def InvalidIndex : CONST8b<0x80>;
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
class RISCVVPseudo {
Pseudo Pseudo = !cast<Pseudo>(NAME); // Used as a key.
Instruction BaseInstr;
}
// The actual table.
def RISCVVPseudosTable : GenericTable {
let FilterClass = "RISCVVPseudo";
let CppTypeName = "PseudoInfo";
let Fields = [ "Pseudo", "BaseInstr" ];
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
let PrimaryKey = [ "Pseudo" ];
let PrimaryKeyName = "getPseudoInfo";
}
def RISCVVIntrinsicsTable : GenericTable {
let FilterClass = "RISCVVIntrinsic";
let CppTypeName = "RISCVVIntrinsicInfo";
let Fields = ["IntrinsicID", "ExtendOperand"];
let PrimaryKey = ["IntrinsicID"];
let PrimaryKeyName = "getRISCVVIntrinsicInfo";
}
class RISCVZvlsseg<string IntrName, bits<11> S, bits<3> L, bits<3> IL = V_M1.value> {
Intrinsic IntrinsicID = !cast<Intrinsic>(IntrName);
bits<11> SEW = S;
bits<3> LMUL = L;
bits<3> IndexLMUL = IL;
Pseudo Pseudo = !cast<Pseudo>(NAME);
}
def RISCVZvlssegTable : GenericTable {
let FilterClass = "RISCVZvlsseg";
let Fields = ["IntrinsicID", "SEW", "LMUL", "IndexLMUL", "Pseudo"];
let PrimaryKey = ["IntrinsicID", "SEW", "LMUL", "IndexLMUL"];
let PrimaryKeyName = "getPseudo";
}
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
//===----------------------------------------------------------------------===//
// Helpers to define the different pseudo instructions.
//===----------------------------------------------------------------------===//
class PseudoToVInst<string PseudoInst> {
string VInst = !subst("_M8", "",
!subst("_M4", "",
!subst("_M2", "",
!subst("_M1", "",
!subst("_MF2", "",
!subst("_MF4", "",
!subst("_MF8", "",
!subst("_B1", "",
!subst("_B2", "",
!subst("_B4", "",
!subst("_B8", "",
!subst("_B16", "",
!subst("_B32", "",
!subst("_B64", "",
!subst("_MASK", "",
!subst("_F16", "",
!subst("_F32", "",
!subst("_F64", "",
!subst("Pseudo", "", PseudoInst)))))))))))))))))));
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
}
class ToLowerCase<string Upper> {
string L = !subst("FF", "ff",
!subst("VLSEG", "vlseg",
!subst("VLSSEG", "vlsseg",
!subst("VSSEG", "vsseg",
!subst("VSSSEG", "vssseg",
!subst("VLOXSEG", "vloxseg",
!subst("VLUXSEG", "vluxseg",
!subst("VSOXSEG", "vsoxseg",
!subst("VSUXSEG", "vsuxseg", Upper)))))))));
}
// Example: PseudoVLSEG2E32_V_M2 -> int_riscv_vlseg2
// Example: PseudoVLSEG2E32_V_M2_MASK -> int_riscv_vlseg2_mask
class PseudoToIntrinsic<string PseudoInst, bit IsMasked> {
string Intrinsic = !strconcat("int_riscv_",
ToLowerCase<
!subst("E8", "",
!subst("E16", "",
!subst("E32", "",
!subst("E64", "",
!subst("EI8", "",
!subst("EI16", "",
!subst("EI32", "",
!subst("EI64", "",
!subst("_V", "", PseudoToVInst<PseudoInst>.VInst)))))))))>.L,
!if(IsMasked, "_mask", ""));
}
// The destination vector register group for a masked vector instruction cannot
// overlap the source mask register (v0), unless the destination vector register
// is being written with a mask value (e.g., comparisons) or the scalar result
// of a reduction.
class GetVRegNoV0<VReg VRegClass> {
VReg R = !cond(!eq(VRegClass, VR) : VRNoV0,
!eq(VRegClass, VRM2) : VRM2NoV0,
!eq(VRegClass, VRM4) : VRM4NoV0,
!eq(VRegClass, VRM8) : VRM8NoV0,
!eq(1, 1) : VRegClass);
}
// Join strings in list using separator and ignoring empty elements
class Join<list<string> strings, string separator> {
string ret = !foldl(!head(strings), !tail(strings), a, b,
!cond(
!and(!empty(a), !empty(b)) : "",
!empty(a) : b,
!empty(b) : a,
1 : a#separator#b));
}
class VPseudo<Instruction instr, LMULInfo m, dag outs, dag ins> :
Pseudo<outs, ins, []>, RISCVVPseudo {
let BaseInstr = instr;
let VLMul = m.value;
}
class VPseudoUSLoadNoMask<VReg RetClass>:
Pseudo<(outs RetClass:$rd),
(ins GPR:$rs1, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo {
let mayLoad = 1;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoUSLoadMask<VReg RetClass>:
Pseudo<(outs GetVRegNoV0<RetClass>.R:$rd),
(ins GetVRegNoV0<RetClass>.R:$merge,
GPR:$rs1,
VMaskOp:$vm, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo {
let mayLoad = 1;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Constraints = "$rd = $merge";
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasMergeOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoSLoadNoMask<VReg RetClass>:
Pseudo<(outs RetClass:$rd),
(ins GPR:$rs1, GPR:$rs2, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo {
let mayLoad = 1;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoSLoadMask<VReg RetClass>:
Pseudo<(outs GetVRegNoV0<RetClass>.R:$rd),
(ins GetVRegNoV0<RetClass>.R:$merge,
GPR:$rs1, GPR:$rs2,
VMaskOp:$vm, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo {
let mayLoad = 1;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Constraints = "$rd = $merge";
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasMergeOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoILoadNoMask<VReg RetClass, VReg IdxClass>:
Pseudo<(outs RetClass:$rd),
(ins GPR:$rs1, IdxClass:$rs2, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo {
let mayLoad = 1;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoILoadMask<VReg RetClass, VReg IdxClass>:
Pseudo<(outs GetVRegNoV0<RetClass>.R:$rd),
(ins GetVRegNoV0<RetClass>.R:$merge,
GPR:$rs1, IdxClass:$rs2,
VMaskOp:$vm, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo {
let mayLoad = 1;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Constraints = "$rd = $merge";
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasMergeOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoUSStoreNoMask<VReg StClass>:
Pseudo<(outs),
(ins StClass:$rd, GPR:$rs1, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 1;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoUSStoreMask<VReg StClass>:
Pseudo<(outs),
(ins StClass:$rd, GPR:$rs1, VMaskOp:$vm, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 1;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoSStoreNoMask<VReg StClass>:
Pseudo<(outs),
(ins StClass:$rd, GPR:$rs1, GPR:$rs2, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 1;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoSStoreMask<VReg StClass>:
Pseudo<(outs),
(ins StClass:$rd, GPR:$rs1, GPR:$rs2, VMaskOp:$vm, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 1;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
// Unary instruction that is never masked so HasDummyMask=0.
class VPseudoUnaryNoDummyMask<VReg RetClass,
DAGOperand Op2Class> :
Pseudo<(outs RetClass:$rd),
(ins Op2Class:$rs1, GPR:$vl, ixlenimm:$sew), []>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoNullaryNoMask<VReg RegClass>:
Pseudo<(outs RegClass:$rd),
(ins GPR:$vl, ixlenimm:$sew),
[]>, RISCVVPseudo {
let mayLoad = 0;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoNullaryMask<VReg RegClass>:
Pseudo<(outs GetVRegNoV0<RegClass>.R:$rd),
(ins GetVRegNoV0<RegClass>.R:$merge, VMaskOp:$vm, GPR:$vl,
ixlenimm:$sew), []>, RISCVVPseudo {
let mayLoad = 0;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Constraints ="$rd = $merge";
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasMergeOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
// Nullary for pseudo instructions. They are expanded in
// RISCVExpandPseudoInsts pass.
class VPseudoNullaryPseudoM<string BaseInst>
: Pseudo<(outs VR:$rd), (ins GPR:$vl, ixlenimm:$sew), []>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
// BaseInstr is not used in RISCVExpandPseudoInsts pass.
// Just fill a corresponding real v-inst to pass tablegen check.
let BaseInstr = !cast<Instruction>(BaseInst);
}
// RetClass could be GPR or VReg.
class VPseudoUnaryNoMask<DAGOperand RetClass, VReg OpClass, string Constraint = ""> :
Pseudo<(outs RetClass:$rd),
(ins OpClass:$rs2, GPR:$vl, ixlenimm:$sew), []>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Constraints = Constraint;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoUnaryMask<VReg RetClass, VReg OpClass, string Constraint = ""> :
Pseudo<(outs GetVRegNoV0<RetClass>.R:$rd),
(ins GetVRegNoV0<RetClass>.R:$merge, OpClass:$rs2,
VMaskOp:$vm, GPR:$vl, ixlenimm:$sew), []>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Constraints = Join<[Constraint, "$rd = $merge"], ",">.ret;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasMergeOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
// mask unary operation without maskedoff
class VPseudoMaskUnarySOutMask:
Pseudo<(outs GPR:$rd),
(ins VR:$rs1, VMaskOp:$vm, GPR:$vl, ixlenimm:$sew), []>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
// Masked mask operation have no $rd=$merge constraints
class VPseudoUnaryMOutMask:
Pseudo<(outs VR:$rd),
(ins VR:$merge, VR:$rs1, VMaskOp:$vm, GPR:$vl, ixlenimm:$sew), []>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Constraints = "$rd = $merge";
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasMergeOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
// Mask can be V0~V31
class VPseudoUnaryAnyMask<VReg RetClass,
VReg Op1Class> :
Pseudo<(outs RetClass:$rd),
(ins RetClass:$merge,
Op1Class:$rs2,
VR:$vm, GPR:$vl, ixlenimm:$sew),
[]>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Constraints = "@earlyclobber $rd, $rd = $merge";
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasMergeOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoBinaryNoMask<VReg RetClass,
VReg Op1Class,
DAGOperand Op2Class,
string Constraint> :
Pseudo<(outs RetClass:$rd),
(ins Op1Class:$rs2, Op2Class:$rs1, GPR:$vl, ixlenimm:$sew), []>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Constraints = Constraint;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoIStoreNoMask<VReg StClass, VReg IdxClass>:
Pseudo<(outs),
(ins StClass:$rd, GPR:$rs1, IdxClass:$rs2, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 1;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoIStoreMask<VReg StClass, VReg IdxClass>:
Pseudo<(outs),
(ins StClass:$rd, GPR:$rs1, IdxClass:$rs2, VMaskOp:$vm, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 1;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoBinaryMask<VReg RetClass,
VReg Op1Class,
DAGOperand Op2Class,
string Constraint> :
Pseudo<(outs GetVRegNoV0<RetClass>.R:$rd),
(ins GetVRegNoV0<RetClass>.R:$merge,
Op1Class:$rs2, Op2Class:$rs1,
VMaskOp:$vm, GPR:$vl, ixlenimm:$sew), []>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Constraints = Join<[Constraint, "$rd = $merge"], ",">.ret;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasMergeOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoBinaryCarryIn<VReg RetClass,
VReg Op1Class,
DAGOperand Op2Class,
LMULInfo MInfo,
bit CarryIn,
string Constraint> :
Pseudo<(outs RetClass:$rd),
!if(CarryIn,
(ins Op1Class:$rs2, Op2Class:$rs1, VMV0:$carry, GPR:$vl,
ixlenimm:$sew),
(ins Op1Class:$rs2, Op2Class:$rs1, GPR:$vl, ixlenimm:$sew)), []>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Constraints = Constraint;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasMergeOp = 0;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
let VLMul = MInfo.value;
}
class VPseudoTernaryNoMask<VReg RetClass,
VReg Op1Class,
DAGOperand Op2Class,
string Constraint> :
Pseudo<(outs RetClass:$rd),
(ins RetClass:$rs3, Op1Class:$rs1, Op2Class:$rs2,
GPR:$vl, ixlenimm:$sew),
[]>,
RISCVVPseudo {
let mayLoad = 0;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Constraints = Join<[Constraint, "$rd = $rs3"], ",">.ret;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasMergeOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoAMOWDNoMask<VReg RetClass,
VReg Op1Class> :
Pseudo<(outs GetVRegNoV0<RetClass>.R:$vd_wd),
(ins GPR:$rs1,
Op1Class:$vs2,
GetVRegNoV0<RetClass>.R:$vd,
GPR:$vl, ixlenimm:$sew), []>,
RISCVVPseudo {
let mayLoad = 1;
let mayStore = 1;
let hasSideEffects = 1;
let usesCustomInserter = 1;
let Constraints = "$vd_wd = $vd";
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoAMOWDMask<VReg RetClass,
VReg Op1Class> :
Pseudo<(outs GetVRegNoV0<RetClass>.R:$vd_wd),
(ins GPR:$rs1,
Op1Class:$vs2,
GetVRegNoV0<RetClass>.R:$vd,
VMaskOp:$vm, GPR:$vl, ixlenimm:$sew), []>,
RISCVVPseudo {
let mayLoad = 1;
let mayStore = 1;
let hasSideEffects = 1;
let usesCustomInserter = 1;
let Constraints = "$vd_wd = $vd";
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
multiclass VPseudoAMOEI<int eew> {
// Standard scalar AMO supports 32, 64, and 128 Mem data bits,
// and in the base vector "V" extension, only SEW up to ELEN = max(XLEN, FLEN)
// are required to be supported.
// therefore only [32, 64] is allowed here.
foreach sew = [32, 64] in {
foreach lmul = MxSet<sew>.m in {
defvar octuple_lmul = octuple_from_str<lmul.MX>.ret;
// Calculate emul = eew * lmul / sew
defvar octuple_emul = !srl(!mul(eew, octuple_lmul), shift_amount<sew>.val);
if !and(!ge(octuple_emul, 1), !le(octuple_emul, 64)) then {
defvar emulMX = octuple_to_str<octuple_emul>.ret;
defvar lmulMX = octuple_to_str<octuple_lmul>.ret;
defvar emul= !cast<LMULInfo>("V_" # emulMX);
defvar lmul = !cast<LMULInfo>("V_" # lmulMX);
let VLMul = lmul.value in {
def "_WD_" # lmulMX # "_" # emulMX : VPseudoAMOWDNoMask<lmul.vrclass, emul.vrclass>;
def "_WD_" # lmulMX # "_" # emulMX # "_MASK" : VPseudoAMOWDMask<lmul.vrclass, emul.vrclass>;
}
}
}
}
}
multiclass VPseudoAMO {
foreach eew = EEWList in
defm "EI" # eew : VPseudoAMOEI<eew>;
}
class VPseudoUSSegLoadNoMask<VReg RetClass, bits<11> EEW>:
Pseudo<(outs RetClass:$rd),
(ins GPR:$rs1, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo,
RISCVZvlsseg<PseudoToIntrinsic<NAME, false>.Intrinsic, EEW, VLMul> {
let mayLoad = 1;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoUSSegLoadMask<VReg RetClass, bits<11> EEW>:
Pseudo<(outs GetVRegNoV0<RetClass>.R:$rd),
(ins GetVRegNoV0<RetClass>.R:$merge, GPR:$rs1,
VMaskOp:$vm, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo,
RISCVZvlsseg<PseudoToIntrinsic<NAME, true>.Intrinsic, EEW, VLMul> {
let mayLoad = 1;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Constraints = "$rd = $merge";
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasMergeOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoSSegLoadNoMask<VReg RetClass, bits<11> EEW>:
Pseudo<(outs RetClass:$rd),
(ins GPR:$rs1, GPR:$offset, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo,
RISCVZvlsseg<PseudoToIntrinsic<NAME, false>.Intrinsic, EEW, VLMul> {
let mayLoad = 1;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoSSegLoadMask<VReg RetClass, bits<11> EEW>:
Pseudo<(outs GetVRegNoV0<RetClass>.R:$rd),
(ins GetVRegNoV0<RetClass>.R:$merge, GPR:$rs1,
GPR:$offset, VMaskOp:$vm, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo,
RISCVZvlsseg<PseudoToIntrinsic<NAME, true>.Intrinsic, EEW, VLMul> {
let mayLoad = 1;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Constraints = "$rd = $merge";
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasMergeOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoISegLoadNoMask<VReg RetClass, VReg IdxClass, bits<11> EEW, bits<3> LMUL>:
Pseudo<(outs RetClass:$rd),
(ins GPR:$rs1, IdxClass:$offset, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo,
RISCVZvlsseg<PseudoToIntrinsic<NAME, false>.Intrinsic, EEW, VLMul, LMUL> {
let mayLoad = 1;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
// For vector indexed segment loads, the destination vector register groups
// cannot overlap the source vector register group
let Constraints = "@earlyclobber $rd";
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoISegLoadMask<VReg RetClass, VReg IdxClass, bits<11> EEW, bits<3> LMUL>:
Pseudo<(outs GetVRegNoV0<RetClass>.R:$rd),
(ins GetVRegNoV0<RetClass>.R:$merge, GPR:$rs1,
IdxClass:$offset, VMaskOp:$vm, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo,
RISCVZvlsseg<PseudoToIntrinsic<NAME, true>.Intrinsic, EEW, VLMul, LMUL> {
let mayLoad = 1;
let mayStore = 0;
let hasSideEffects = 0;
let usesCustomInserter = 1;
// For vector indexed segment loads, the destination vector register groups
// cannot overlap the source vector register group
let Constraints = "@earlyclobber $rd, $rd = $merge";
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasMergeOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoUSSegStoreNoMask<VReg ValClass, bits<11> EEW>:
Pseudo<(outs),
(ins ValClass:$rd, GPR:$rs1, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo,
RISCVZvlsseg<PseudoToIntrinsic<NAME, false>.Intrinsic, EEW, VLMul> {
let mayLoad = 0;
let mayStore = 1;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoUSSegStoreMask<VReg ValClass, bits<11> EEW>:
Pseudo<(outs),
(ins ValClass:$rd, GPR:$rs1,
VMaskOp:$vm, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo,
RISCVZvlsseg<PseudoToIntrinsic<NAME, true>.Intrinsic, EEW, VLMul> {
let mayLoad = 0;
let mayStore = 1;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoSSegStoreNoMask<VReg ValClass, bits<11> EEW>:
Pseudo<(outs),
(ins ValClass:$rd, GPR:$rs1, GPR: $offset, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo,
RISCVZvlsseg<PseudoToIntrinsic<NAME, false>.Intrinsic, EEW, VLMul> {
let mayLoad = 0;
let mayStore = 1;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoSSegStoreMask<VReg ValClass, bits<11> EEW>:
Pseudo<(outs),
(ins ValClass:$rd, GPR:$rs1, GPR: $offset,
VMaskOp:$vm, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo,
RISCVZvlsseg<PseudoToIntrinsic<NAME, true>.Intrinsic, EEW, VLMul> {
let mayLoad = 0;
let mayStore = 1;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoISegStoreNoMask<VReg ValClass, VReg IdxClass, bits<11> EEW, bits<3> LMUL>:
Pseudo<(outs),
(ins ValClass:$rd, GPR:$rs1, IdxClass: $index,
GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo,
RISCVZvlsseg<PseudoToIntrinsic<NAME, false>.Intrinsic, EEW, VLMul, LMUL> {
let mayLoad = 0;
let mayStore = 1;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let HasDummyMask = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
class VPseudoISegStoreMask<VReg ValClass, VReg IdxClass, bits<11> EEW, bits<3> LMUL>:
Pseudo<(outs),
(ins ValClass:$rd, GPR:$rs1, IdxClass: $index,
VMaskOp:$vm, GPR:$vl, ixlenimm:$sew),[]>,
RISCVVPseudo,
RISCVZvlsseg<PseudoToIntrinsic<NAME, true>.Intrinsic, EEW, VLMul, LMUL> {
let mayLoad = 0;
let mayStore = 1;
let hasSideEffects = 0;
let usesCustomInserter = 1;
let Uses = [VL, VTYPE];
let HasVLOp = 1;
let HasSEWOp = 1;
let BaseInstr = !cast<Instruction>(PseudoToVInst<NAME>.VInst);
}
multiclass VPseudoUSLoad {
foreach lmul = MxList.m in {
defvar LInfo = lmul.MX;
defvar vreg = lmul.vrclass;
let VLMul = lmul.value in {
def "_V_" # LInfo : VPseudoUSLoadNoMask<vreg>;
def "_V_" # LInfo # "_MASK" : VPseudoUSLoadMask<vreg>;
}
}
}
multiclass VPseudoSLoad {
foreach lmul = MxList.m in {
defvar LInfo = lmul.MX;
defvar vreg = lmul.vrclass;
let VLMul = lmul.value in {
def "_V_" # LInfo : VPseudoSLoadNoMask<vreg>;
def "_V_" # LInfo # "_MASK" : VPseudoSLoadMask<vreg>;
}
}
}
multiclass VPseudoILoad {
foreach lmul = MxList.m in
foreach idx_lmul = MxList.m in {
defvar LInfo = lmul.MX;
defvar Vreg = lmul.vrclass;
defvar IdxLInfo = idx_lmul.MX;
defvar IdxVreg = idx_lmul.vrclass;
let VLMul = lmul.value in {
def "_V_" # IdxLInfo # "_" # LInfo : VPseudoILoadNoMask<Vreg, IdxVreg>;
def "_V_" # IdxLInfo # "_" # LInfo # "_MASK" : VPseudoILoadMask<Vreg, IdxVreg>;
}
}
}
multiclass VPseudoUSStore {
foreach lmul = MxList.m in {
defvar LInfo = lmul.MX;
defvar vreg = lmul.vrclass;
let VLMul = lmul.value in {
def "_V_" # LInfo : VPseudoUSStoreNoMask<vreg>;
def "_V_" # LInfo # "_MASK" : VPseudoUSStoreMask<vreg>;
}
}
}
multiclass VPseudoSStore {
foreach lmul = MxList.m in {
defvar LInfo = lmul.MX;
defvar vreg = lmul.vrclass;
let VLMul = lmul.value in {
def "_V_" # LInfo : VPseudoSStoreNoMask<vreg>;
def "_V_" # LInfo # "_MASK" : VPseudoSStoreMask<vreg>;
}
}
}
multiclass VPseudoIStore {
foreach lmul = MxList.m in
foreach idx_lmul = MxList.m in {
defvar LInfo = lmul.MX;
defvar Vreg = lmul.vrclass;
defvar IdxLInfo = idx_lmul.MX;
defvar IdxVreg = idx_lmul.vrclass;
let VLMul = lmul.value in {
def "_V_" # IdxLInfo # "_" # LInfo : VPseudoIStoreNoMask<Vreg, IdxVreg>;
def "_V_" # IdxLInfo # "_" # LInfo # "_MASK" : VPseudoIStoreMask<Vreg, IdxVreg>;
}
}
}
multiclass VPseudoUnaryS_M {
foreach mti = AllMasks in
{
let VLMul = mti.LMul.value in {
def "_M_" # mti.BX : VPseudoUnaryNoMask<GPR, VR>;
def "_M_" # mti.BX # "_MASK" : VPseudoMaskUnarySOutMask;
}
}
}
multiclass VPseudoUnaryM_M {
defvar constraint = "@earlyclobber $rd";
foreach mti = AllMasks in
{
let VLMul = mti.LMul.value in {
def "_M_" # mti.BX : VPseudoUnaryNoMask<VR, VR, constraint>;
def "_M_" # mti.BX # "_MASK" : VPseudoUnaryMask<VR, VR, constraint>;
}
}
}
multiclass VPseudoMaskNullaryV {
foreach m = MxList.m in {
let VLMul = m.value in {
def "_V_" # m.MX : VPseudoNullaryNoMask<m.vrclass>;
def "_V_" # m.MX # "_MASK" : VPseudoNullaryMask<m.vrclass>;
}
}
}
multiclass VPseudoNullaryPseudoM <string BaseInst> {
foreach mti = AllMasks in {
let VLMul = mti.LMul.value in {
def "_M_" # mti.BX : VPseudoNullaryPseudoM<BaseInst # "_MM">;
}
}
}
multiclass VPseudoUnaryV_M {
defvar constraint = "@earlyclobber $rd";
foreach m = MxList.m in {
let VLMul = m.value in {
def "_" # m.MX : VPseudoUnaryNoMask<m.vrclass, VR, constraint>;
def "_" # m.MX # "_MASK" : VPseudoUnaryMask<m.vrclass, VR, constraint>;
}
}
}
multiclass VPseudoUnaryV_V_AnyMask {
foreach m = MxList.m in {
let VLMul = m.value in
def _VM # "_" # m.MX : VPseudoUnaryAnyMask<m.vrclass, m.vrclass>;
}
}
multiclass VPseudoBinary<VReg RetClass,
VReg Op1Class,
DAGOperand Op2Class,
LMULInfo MInfo,
string Constraint = ""> {
let VLMul = MInfo.value in {
def "_" # MInfo.MX : VPseudoBinaryNoMask<RetClass, Op1Class, Op2Class,
Constraint>;
def "_" # MInfo.MX # "_MASK" : VPseudoBinaryMask<RetClass, Op1Class, Op2Class,
Constraint>;
}
}
multiclass VPseudoBinaryEmul<VReg RetClass,
VReg Op1Class,
DAGOperand Op2Class,
LMULInfo lmul,
LMULInfo emul,
string Constraint = ""> {
let VLMul = lmul.value in {
def "_" # lmul.MX # "_" # emul.MX : VPseudoBinaryNoMask<RetClass, Op1Class, Op2Class,
Constraint>;
def "_" # lmul.MX # "_" # emul.MX # "_MASK" : VPseudoBinaryMask<RetClass, Op1Class, Op2Class,
Constraint>;
}
}
multiclass VPseudoBinaryV_VV<string Constraint = ""> {
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
foreach m = MxList.m in
defm _VV : VPseudoBinary<m.vrclass, m.vrclass, m.vrclass, m, Constraint>;
}
multiclass VPseudoBinaryV_VV_EEW<int eew, string Constraint = ""> {
foreach m = MxList.m in {
foreach sew = EEWList in {
defvar octuple_lmul = octuple_from_str<m.MX>.ret;
// emul = lmul * eew / sew
defvar octuple_emul = !srl(!mul(octuple_lmul, eew), shift_amount<sew>.val);
if !and(!ge(octuple_emul, 1), !le(octuple_emul, 64)) then {
defvar emulMX = octuple_to_str<octuple_emul>.ret;
defvar emul = !cast<LMULInfo>("V_" # emulMX);
defm _VV : VPseudoBinaryEmul<m.vrclass, m.vrclass, emul.vrclass, m, emul, Constraint>;
}
}
}
}
multiclass VPseudoBinaryV_VX<string Constraint = ""> {
foreach m = MxList.m in
defm "_VX" : VPseudoBinary<m.vrclass, m.vrclass, GPR, m, Constraint>;
}
multiclass VPseudoBinaryV_VF<string Constraint = ""> {
foreach m = MxList.m in
foreach f = FPList.fpinfo in
defm "_VF_" # f.FX : VPseudoBinary<m.vrclass, m.vrclass,
f.fprclass, m, Constraint>;
}
multiclass VPseudoBinaryV_VI<Operand ImmType = simm5, string Constraint = ""> {
foreach m = MxList.m in
defm _VI : VPseudoBinary<m.vrclass, m.vrclass, ImmType, m, Constraint>;
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
}
multiclass VPseudoBinaryM_MM {
foreach m = MxList.m in
let VLMul = m.value in {
def "_MM_" # m.MX : VPseudoBinaryNoMask<VR, VR, VR, "">;
}
}
// We use earlyclobber here due to
// * The destination EEW is smaller than the source EEW and the overlap is
// in the lowest-numbered part of the source register group is legal.
// Otherwise, it is illegal.
// * The destination EEW is greater than the source EEW, the source EMUL is
// at least 1, and the overlap is in the highest-numbered part of the
// destination register group is legal. Otherwise, it is illegal.
multiclass VPseudoBinaryW_VV {
foreach m = MxList.m[0-5] in
defm _VV : VPseudoBinary<m.wvrclass, m.vrclass, m.vrclass, m,
"@earlyclobber $rd">;
}
multiclass VPseudoBinaryW_VX {
foreach m = MxList.m[0-5] in
defm "_VX" : VPseudoBinary<m.wvrclass, m.vrclass, GPR, m,
"@earlyclobber $rd">;
}
multiclass VPseudoBinaryW_VF {
foreach m = MxList.m[0-5] in
foreach f = FPList.fpinfo[0-1] in
defm "_VF_" # f.FX : VPseudoBinary<m.wvrclass, m.vrclass,
f.fprclass, m,
"@earlyclobber $rd">;
}
multiclass VPseudoBinaryW_WV {
foreach m = MxList.m[0-5] in
defm _WV : VPseudoBinary<m.wvrclass, m.wvrclass, m.vrclass, m,
"@earlyclobber $rd">;
}
multiclass VPseudoBinaryW_WX {
foreach m = MxList.m[0-5] in
defm "_WX" : VPseudoBinary<m.wvrclass, m.wvrclass, GPR, m,
"@earlyclobber $rd">;
}
multiclass VPseudoBinaryW_WF {
foreach m = MxList.m[0-5] in
foreach f = FPList.fpinfo[0-1] in
defm "_WF_" # f.FX : VPseudoBinary<m.wvrclass, m.wvrclass,
f.fprclass, m,
"@earlyclobber $rd">;
}
multiclass VPseudoBinaryV_WV {
foreach m = MxList.m[0-5] in
defm _WV : VPseudoBinary<m.vrclass, m.wvrclass, m.vrclass, m,
"@earlyclobber $rd">;
}
multiclass VPseudoBinaryV_WX {
foreach m = MxList.m[0-5] in
defm _WX : VPseudoBinary<m.vrclass, m.wvrclass, GPR, m,
"@earlyclobber $rd">;
}
multiclass VPseudoBinaryV_WI {
foreach m = MxList.m[0-5] in
defm _WI : VPseudoBinary<m.vrclass, m.wvrclass, uimm5, m,
"@earlyclobber $rd">;
}
// For vadc and vsbc, the instruction encoding is reserved if the destination
// vector register is v0.
// For vadc and vsbc, CarryIn == 1 and CarryOut == 0
multiclass VPseudoBinaryV_VM<bit CarryOut = 0, bit CarryIn = 1,
string Constraint = ""> {
foreach m = MxList.m in
def "_VV" # !if(CarryIn, "M", "") # "_" # m.MX :
VPseudoBinaryCarryIn<!if(CarryOut, VR,
!if(!and(CarryIn, !not(CarryOut)),
GetVRegNoV0<m.vrclass>.R, m.vrclass)),
m.vrclass, m.vrclass, m, CarryIn, Constraint>;
}
multiclass VPseudoBinaryV_XM<bit CarryOut = 0, bit CarryIn = 1,
string Constraint = ""> {
foreach m = MxList.m in
def "_VX" # !if(CarryIn, "M", "") # "_" # m.MX :
VPseudoBinaryCarryIn<!if(CarryOut, VR,
!if(!and(CarryIn, !not(CarryOut)),
GetVRegNoV0<m.vrclass>.R, m.vrclass)),
m.vrclass, GPR, m, CarryIn, Constraint>;
}
multiclass VPseudoBinaryV_FM {
foreach m = MxList.m in
foreach f = FPList.fpinfo in
def "_VFM_" # f.FX # "_" # m.MX :
VPseudoBinaryCarryIn<GetVRegNoV0<m.vrclass>.R,
m.vrclass, f.fprclass, m, /*CarryIn=*/1, "">;
}
multiclass VPseudoBinaryV_IM<bit CarryOut = 0, bit CarryIn = 1,
string Constraint = ""> {
foreach m = MxList.m in
def "_VI" # !if(CarryIn, "M", "") # "_" # m.MX :
VPseudoBinaryCarryIn<!if(CarryOut, VR,
!if(!and(CarryIn, !not(CarryOut)),
GetVRegNoV0<m.vrclass>.R, m.vrclass)),
m.vrclass, simm5, m, CarryIn, Constraint>;
}
multiclass VPseudoUnaryV_V_X_I_NoDummyMask {
foreach m = MxList.m in {
let VLMul = m.value in {
def "_V_" # m.MX : VPseudoUnaryNoDummyMask<m.vrclass, m.vrclass>;
def "_X_" # m.MX : VPseudoUnaryNoDummyMask<m.vrclass, GPR>;
def "_I_" # m.MX : VPseudoUnaryNoDummyMask<m.vrclass, simm5>;
}
}
}
multiclass VPseudoUnaryV_F_NoDummyMask {
foreach m = MxList.m in {
foreach f = FPList.fpinfo in {
let VLMul = m.value in {
def "_F_" # f.FX # "_" # m.MX : VPseudoUnaryNoDummyMask<m.vrclass, f.fprclass>;
}
}
}
}
multiclass VPseudoUnaryV_V {
foreach m = MxList.m in {
let VLMul = m.value in {
def "_V_" # m.MX : VPseudoUnaryNoMask<m.vrclass, m.vrclass>;
def "_V_" # m.MX # "_MASK" : VPseudoUnaryMask<m.vrclass, m.vrclass>;
}
}
}
multiclass PseudoUnaryV_VF2 {
defvar constraints = "@earlyclobber $rd";
foreach m = MxList.m[1-6] in
{
let VLMul = m.value in {
def "_" # m.MX : VPseudoUnaryNoMask<m.vrclass, m.f2vrclass, constraints>;
def "_" # m.MX # "_MASK" : VPseudoUnaryMask<m.vrclass, m.f2vrclass,
constraints>;
}
}
}
multiclass PseudoUnaryV_VF4 {
defvar constraints = "@earlyclobber $rd";
foreach m = MxList.m[2-6] in
{
let VLMul = m.value in {
def "_" # m.MX : VPseudoUnaryNoMask<m.vrclass, m.f4vrclass, constraints>;
def "_" # m.MX # "_MASK" : VPseudoUnaryMask<m.vrclass, m.f4vrclass,
constraints>;
}
}
}
multiclass PseudoUnaryV_VF8 {
defvar constraints = "@earlyclobber $rd";
foreach m = MxList.m[3-6] in
{
let VLMul = m.value in {
def "_" # m.MX : VPseudoUnaryNoMask<m.vrclass, m.f8vrclass, constraints>;
def "_" # m.MX # "_MASK" : VPseudoUnaryMask<m.vrclass, m.f8vrclass,
constraints>;
}
}
}
// The destination EEW is 1.
// The source EEW is 8, 16, 32, or 64.
// When the destination EEW is different from source EEW, we need to use
// @earlyclobber to avoid the overlap between destination and source registers.
multiclass VPseudoBinaryM_VV {
foreach m = MxList.m in
defm _VV : VPseudoBinary<VR, m.vrclass, m.vrclass, m, "@earlyclobber $rd">;
}
multiclass VPseudoBinaryM_VX {
foreach m = MxList.m in
defm "_VX" :
VPseudoBinary<VR, m.vrclass, GPR, m, "@earlyclobber $rd">;
}
multiclass VPseudoBinaryM_VF {
foreach m = MxList.m in
foreach f = FPList.fpinfo in
defm "_VF_" # f.FX :
VPseudoBinary<VR, m.vrclass, f.fprclass, m, "@earlyclobber $rd">;
}
multiclass VPseudoBinaryM_VI {
foreach m = MxList.m in
defm _VI : VPseudoBinary<VR, m.vrclass, simm5, m, "@earlyclobber $rd">;
}
multiclass VPseudoBinaryV_VV_VX_VI<Operand ImmType = simm5, string Constraint = ""> {
defm "" : VPseudoBinaryV_VV<Constraint>;
defm "" : VPseudoBinaryV_VX<Constraint>;
defm "" : VPseudoBinaryV_VI<ImmType, Constraint>;
}
multiclass VPseudoBinaryV_VV_VX {
defm "" : VPseudoBinaryV_VV;
defm "" : VPseudoBinaryV_VX;
}
multiclass VPseudoBinaryV_VV_VF {
defm "" : VPseudoBinaryV_VV;
defm "" : VPseudoBinaryV_VF;
}
multiclass VPseudoBinaryV_VX_VI<Operand ImmType = simm5> {
defm "" : VPseudoBinaryV_VX;
defm "" : VPseudoBinaryV_VI<ImmType>;
}
multiclass VPseudoBinaryW_VV_VX {
defm "" : VPseudoBinaryW_VV;
defm "" : VPseudoBinaryW_VX;
}
multiclass VPseudoBinaryW_VV_VF {
defm "" : VPseudoBinaryW_VV;
defm "" : VPseudoBinaryW_VF;
}
multiclass VPseudoBinaryW_WV_WX {
defm "" : VPseudoBinaryW_WV;
defm "" : VPseudoBinaryW_WX;
}
multiclass VPseudoBinaryW_WV_WF {
defm "" : VPseudoBinaryW_WV;
defm "" : VPseudoBinaryW_WF;
}
multiclass VPseudoBinaryV_VM_XM_IM {
defm "" : VPseudoBinaryV_VM;
defm "" : VPseudoBinaryV_XM;
defm "" : VPseudoBinaryV_IM;
}
multiclass VPseudoBinaryV_VM_XM {
defm "" : VPseudoBinaryV_VM;
defm "" : VPseudoBinaryV_XM;
}
multiclass VPseudoBinaryM_VM_XM_IM<string Constraint> {
defm "" : VPseudoBinaryV_VM</*CarryOut=*/1, /*CarryIn=*/1, Constraint>;
defm "" : VPseudoBinaryV_XM</*CarryOut=*/1, /*CarryIn=*/1, Constraint>;
defm "" : VPseudoBinaryV_IM</*CarryOut=*/1, /*CarryIn=*/1, Constraint>;
}
multiclass VPseudoBinaryM_VM_XM<string Constraint> {
defm "" : VPseudoBinaryV_VM</*CarryOut=*/1, /*CarryIn=*/1, Constraint>;
defm "" : VPseudoBinaryV_XM</*CarryOut=*/1, /*CarryIn=*/1, Constraint>;
}
multiclass VPseudoBinaryM_V_X_I<string Constraint> {
defm "" : VPseudoBinaryV_VM</*CarryOut=*/1, /*CarryIn=*/0, Constraint>;
defm "" : VPseudoBinaryV_XM</*CarryOut=*/1, /*CarryIn=*/0, Constraint>;
defm "" : VPseudoBinaryV_IM</*CarryOut=*/1, /*CarryIn=*/0, Constraint>;
}
multiclass VPseudoBinaryM_V_X<string Constraint> {
defm "" : VPseudoBinaryV_VM</*CarryOut=*/1, /*CarryIn=*/0, Constraint>;
defm "" : VPseudoBinaryV_XM</*CarryOut=*/1, /*CarryIn=*/0, Constraint>;
}
multiclass VPseudoBinaryV_WV_WX_WI {
defm "" : VPseudoBinaryV_WV;
defm "" : VPseudoBinaryV_WX;
defm "" : VPseudoBinaryV_WI;
}
multiclass VPseudoTernary<VReg RetClass,
VReg Op1Class,
RegisterClass Op2Class,
LMULInfo MInfo,
string Constraint = ""> {
let VLMul = MInfo.value in {
def "_" # MInfo.MX : VPseudoTernaryNoMask<RetClass, Op1Class, Op2Class, Constraint>;
def "_" # MInfo.MX # "_MASK" : VPseudoBinaryMask<RetClass, Op1Class, Op2Class, Constraint>;
}
}
multiclass VPseudoTernaryV_VV<string Constraint = ""> {
foreach m = MxList.m in
defm _VV : VPseudoTernary<m.vrclass, m.vrclass, m.vrclass, m, Constraint>;
}
multiclass VPseudoTernaryV_VX<string Constraint = ""> {
foreach m = MxList.m in
defm _VX : VPseudoTernary<m.vrclass, m.vrclass, GPR, m, Constraint>;
}
multiclass VPseudoTernaryV_VX_AAXA<string Constraint = ""> {
foreach m = MxList.m in
defm "_VX" : VPseudoTernary<m.vrclass, GPR, m.vrclass, m, Constraint>;
}
multiclass VPseudoTernaryV_VF_AAXA<string Constraint = ""> {
foreach m = MxList.m in
foreach f = FPList.fpinfo in
defm "_VF_" # f.FX : VPseudoTernary<m.vrclass, f.fprclass, m.vrclass,
m, Constraint>;
}
multiclass VPseudoTernaryW_VV {
defvar constraint = "@earlyclobber $rd";
foreach m = MxList.m[0-5] in
defm _VV : VPseudoTernary<m.wvrclass, m.vrclass, m.vrclass, m, constraint>;
}
multiclass VPseudoTernaryW_VX {
defvar constraint = "@earlyclobber $rd";
foreach m = MxList.m[0-5] in
defm "_VX" : VPseudoTernary<m.wvrclass, GPR, m.vrclass, m, constraint>;
}
multiclass VPseudoTernaryW_VF {
defvar constraint = "@earlyclobber $rd";
foreach m = MxList.m[0-5] in
foreach f = FPList.fpinfo[0-1] in
defm "_VF_" # f.FX : VPseudoTernary<m.wvrclass, f.fprclass, m.vrclass, m,
constraint>;
}
multiclass VPseudoTernaryV_VI<Operand ImmType = simm5, string Constraint = ""> {
foreach m = MxList.m in
defm _VI : VPseudoTernary<m.vrclass, m.vrclass, ImmType, m, Constraint>;
}
multiclass VPseudoTernaryV_VV_VX_AAXA<string Constraint = ""> {
defm "" : VPseudoTernaryV_VV<Constraint>;
defm "" : VPseudoTernaryV_VX_AAXA<Constraint>;
}
multiclass VPseudoTernaryV_VV_VF_AAXA<string Constraint = ""> {
defm "" : VPseudoTernaryV_VV<Constraint>;
defm "" : VPseudoTernaryV_VF_AAXA<Constraint>;
}
multiclass VPseudoTernaryV_VX_VI<Operand ImmType = simm5, string Constraint = ""> {
defm "" : VPseudoTernaryV_VX<Constraint>;
defm "" : VPseudoTernaryV_VI<ImmType, Constraint>;
}
multiclass VPseudoTernaryW_VV_VX {
defm "" : VPseudoTernaryW_VV;
defm "" : VPseudoTernaryW_VX;
}
multiclass VPseudoTernaryW_VV_VF {
defm "" : VPseudoTernaryW_VV;
defm "" : VPseudoTernaryW_VF;
}
multiclass VPseudoBinaryM_VV_VX_VI {
defm "" : VPseudoBinaryM_VV;
defm "" : VPseudoBinaryM_VX;
defm "" : VPseudoBinaryM_VI;
}
multiclass VPseudoBinaryM_VV_VX {
defm "" : VPseudoBinaryM_VV;
defm "" : VPseudoBinaryM_VX;
}
multiclass VPseudoBinaryM_VV_VF {
defm "" : VPseudoBinaryM_VV;
defm "" : VPseudoBinaryM_VF;
}
multiclass VPseudoBinaryM_VX_VI {
defm "" : VPseudoBinaryM_VX;
defm "" : VPseudoBinaryM_VI;
}
multiclass VPseudoReductionV_VS {
foreach m = MxList.m in {
let WritesElement0 = 1 in
defm _VS : VPseudoTernary<V_M1.vrclass, m.vrclass, V_M1.vrclass, m>;
}
}
multiclass VPseudoConversion<VReg RetClass,
VReg Op1Class,
LMULInfo MInfo,
string Constraint = ""> {
let VLMul = MInfo.value in {
def "_" # MInfo.MX : VPseudoUnaryNoMask<RetClass, Op1Class, Constraint>;
def "_" # MInfo.MX # "_MASK" : VPseudoUnaryMask<RetClass, Op1Class,
Constraint>;
}
}
multiclass VPseudoConversionV_V {
foreach m = MxList.m in
defm _V : VPseudoConversion<m.vrclass, m.vrclass, m>;
}
multiclass VPseudoConversionW_V {
defvar constraint = "@earlyclobber $rd";
foreach m = MxList.m[0-5] in
defm _V : VPseudoConversion<m.wvrclass, m.vrclass, m, constraint>;
}
multiclass VPseudoConversionV_W {
defvar constraint = "@earlyclobber $rd";
foreach m = MxList.m[0-5] in
defm _W : VPseudoConversion<m.vrclass, m.wvrclass, m, constraint>;
}
multiclass VPseudoUSSegLoad<bit isFF> {
foreach eew = EEWList in {
foreach lmul = MxSet<eew>.m in {
defvar LInfo = lmul.MX;
let VLMul = lmul.value in {
foreach nf = NFSet<lmul>.L in {
defvar vreg = SegRegClass<lmul, nf>.RC;
defvar FFStr = !if(isFF, "FF", "");
def nf # "E" # eew # FFStr # "_V_" # LInfo :
VPseudoUSSegLoadNoMask<vreg, eew>;
def nf # "E" # eew # FFStr # "_V_" # LInfo # "_MASK" :
VPseudoUSSegLoadMask<vreg, eew>;
}
}
}
}
}
multiclass VPseudoSSegLoad {
foreach eew = EEWList in {
foreach lmul = MxSet<eew>.m in {
defvar LInfo = lmul.MX;
let VLMul = lmul.value in {
foreach nf = NFSet<lmul>.L in {
defvar vreg = SegRegClass<lmul, nf>.RC;
def nf # "E" # eew # "_V_" # LInfo : VPseudoSSegLoadNoMask<vreg, eew>;
def nf # "E" # eew # "_V_" # LInfo # "_MASK" : VPseudoSSegLoadMask<vreg, eew>;
}
}
}
}
}
multiclass VPseudoISegLoad {
foreach idx_eew = EEWList in { // EEW for index argument.
foreach idx_lmul = MxSet<idx_eew>.m in { // LMUL for index argument.
foreach val_lmul = MxList.m in { // LMUL for the value.
defvar IdxLInfo = idx_lmul.MX;
defvar IdxVreg = idx_lmul.vrclass;
defvar ValLInfo = val_lmul.MX;
let VLMul = val_lmul.value in {
foreach nf = NFSet<val_lmul>.L in {
defvar ValVreg = SegRegClass<val_lmul, nf>.RC;
def nf # "EI" # idx_eew # "_V_" # IdxLInfo # "_" # ValLInfo :
VPseudoISegLoadNoMask<ValVreg, IdxVreg, idx_eew, idx_lmul.value>;
def nf # "EI" # idx_eew # "_V_" # IdxLInfo # "_" # ValLInfo # "_MASK" :
VPseudoISegLoadMask<ValVreg, IdxVreg, idx_eew, idx_lmul.value>;
}
}
}
}
}
}
multiclass VPseudoUSSegStore {
foreach eew = EEWList in {
foreach lmul = MxSet<eew>.m in {
defvar LInfo = lmul.MX;
let VLMul = lmul.value in {
foreach nf = NFSet<lmul>.L in {
defvar vreg = SegRegClass<lmul, nf>.RC;
def nf # "E" # eew # "_V_" # LInfo : VPseudoUSSegStoreNoMask<vreg, eew>;
def nf # "E" # eew # "_V_" # LInfo # "_MASK" : VPseudoUSSegStoreMask<vreg, eew>;
}
}
}
}
}
multiclass VPseudoSSegStore {
foreach eew = EEWList in {
foreach lmul = MxSet<eew>.m in {
defvar LInfo = lmul.MX;
let VLMul = lmul.value in {
foreach nf = NFSet<lmul>.L in {
defvar vreg = SegRegClass<lmul, nf>.RC;
def nf # "E" # eew # "_V_" # LInfo : VPseudoSSegStoreNoMask<vreg, eew>;
def nf # "E" # eew # "_V_" # LInfo # "_MASK" : VPseudoSSegStoreMask<vreg, eew>;
}
}
}
}
}
multiclass VPseudoISegStore {
foreach idx_eew = EEWList in { // EEW for index argument.
foreach idx_lmul = MxSet<idx_eew>.m in { // LMUL for index argument.
foreach val_lmul = MxList.m in { // LMUL for the value.
defvar IdxLInfo = idx_lmul.MX;
defvar IdxVreg = idx_lmul.vrclass;
defvar ValLInfo = val_lmul.MX;
let VLMul = val_lmul.value in {
foreach nf = NFSet<val_lmul>.L in {
defvar ValVreg = SegRegClass<val_lmul, nf>.RC;
def nf # "EI" # idx_eew # "_V_" # IdxLInfo # "_" # ValLInfo :
VPseudoISegStoreNoMask<ValVreg, IdxVreg, idx_eew, idx_lmul.value>;
def nf # "EI" # idx_eew # "_V_" # IdxLInfo # "_" # ValLInfo # "_MASK" :
VPseudoISegStoreMask<ValVreg, IdxVreg, idx_eew, idx_lmul.value>;
}
}
}
}
}
}
//===----------------------------------------------------------------------===//
// Helpers to define the intrinsic patterns.
//===----------------------------------------------------------------------===//
class VPatUnaryNoMask<string intrinsic_name,
string inst,
string kind,
ValueType result_type,
ValueType op2_type,
int sew,
LMULInfo vlmul,
VReg op2_reg_class> :
Pat<(result_type (!cast<Intrinsic>(intrinsic_name)
(op2_type op2_reg_class:$rs2),
(XLenVT GPR:$vl))),
(!cast<Instruction>(inst#"_"#kind#"_"#vlmul.MX)
(op2_type op2_reg_class:$rs2),
(NoX0 GPR:$vl), sew)>;
class VPatUnaryMask<string intrinsic_name,
string inst,
string kind,
ValueType result_type,
ValueType op2_type,
ValueType mask_type,
int sew,
LMULInfo vlmul,
VReg result_reg_class,
VReg op2_reg_class> :
Pat<(result_type (!cast<Intrinsic>(intrinsic_name#"_mask")
(result_type result_reg_class:$merge),
(op2_type op2_reg_class:$rs2),
(mask_type V0),
(XLenVT GPR:$vl))),
(!cast<Instruction>(inst#"_"#kind#"_"#vlmul.MX#"_MASK")
(result_type result_reg_class:$merge),
(op2_type op2_reg_class:$rs2),
(mask_type V0), (NoX0 GPR:$vl), sew)>;
class VPatMaskUnaryNoMask<string intrinsic_name,
string inst,
MTypeInfo mti> :
Pat<(mti.Mask (!cast<Intrinsic>(intrinsic_name)
(mti.Mask VR:$rs2),
(XLenVT GPR:$vl))),
(!cast<Instruction>(inst#"_M_"#mti.BX)
(mti.Mask VR:$rs2),
(NoX0 GPR:$vl), mti.SEW)>;
class VPatMaskUnaryMask<string intrinsic_name,
string inst,
MTypeInfo mti> :
Pat<(mti.Mask (!cast<Intrinsic>(intrinsic_name#"_mask")
(mti.Mask VR:$merge),
(mti.Mask VR:$rs2),
(mti.Mask V0),
(XLenVT GPR:$vl))),
(!cast<Instruction>(inst#"_M_"#mti.BX#"_MASK")
(mti.Mask VR:$merge),
(mti.Mask VR:$rs2),
(mti.Mask V0), (NoX0 GPR:$vl), mti.SEW)>;
class VPatUnaryAnyMask<string intrinsic,
string inst,
string kind,
ValueType result_type,
ValueType op1_type,
ValueType mask_type,
int sew,
LMULInfo vlmul,
VReg result_reg_class,
VReg op1_reg_class> :
Pat<(result_type (!cast<Intrinsic>(intrinsic)
(result_type result_reg_class:$merge),
(op1_type op1_reg_class:$rs1),
(mask_type VR:$rs2),
(XLenVT GPR:$vl))),
(!cast<Instruction>(inst#"_"#kind#"_"#vlmul.MX)
(result_type result_reg_class:$merge),
(op1_type op1_reg_class:$rs1),
(mask_type VR:$rs2),
(NoX0 GPR:$vl), sew)>;
class VPatBinaryNoMask<string intrinsic_name,
string inst,
ValueType result_type,
ValueType op1_type,
ValueType op2_type,
int sew,
VReg op1_reg_class,
DAGOperand op2_kind> :
Pat<(result_type (!cast<Intrinsic>(intrinsic_name)
(op1_type op1_reg_class:$rs1),
(op2_type op2_kind:$rs2),
(XLenVT GPR:$vl))),
(!cast<Instruction>(inst)
(op1_type op1_reg_class:$rs1),
(op2_type op2_kind:$rs2),
(NoX0 GPR:$vl), sew)>;
class VPatBinaryMask<string intrinsic_name,
string inst,
ValueType result_type,
ValueType op1_type,
ValueType op2_type,
ValueType mask_type,
int sew,
VReg result_reg_class,
VReg op1_reg_class,
DAGOperand op2_kind> :
Pat<(result_type (!cast<Intrinsic>(intrinsic_name#"_mask")
(result_type result_reg_class:$merge),
(op1_type op1_reg_class:$rs1),
(op2_type op2_kind:$rs2),
(mask_type V0),
(XLenVT GPR:$vl))),
(!cast<Instruction>(inst#"_MASK")
(result_type result_reg_class:$merge),
(op1_type op1_reg_class:$rs1),
(op2_type op2_kind:$rs2),
(mask_type V0), (NoX0 GPR:$vl), sew)>;
class VPatTernaryNoMask<string intrinsic,
string inst,
string kind,
ValueType result_type,
ValueType op1_type,
ValueType op2_type,
ValueType mask_type,
int sew,
LMULInfo vlmul,
VReg result_reg_class,
RegisterClass op1_reg_class,
DAGOperand op2_kind> :
Pat<(result_type (!cast<Intrinsic>(intrinsic)
(result_type result_reg_class:$rs3),
(op1_type op1_reg_class:$rs1),
(op2_type op2_kind:$rs2),
(XLenVT GPR:$vl))),
(!cast<Instruction>(inst#"_"#kind#"_"#vlmul.MX)
result_reg_class:$rs3,
(op1_type op1_reg_class:$rs1),
op2_kind:$rs2,
(NoX0 GPR:$vl), sew)>;
class VPatTernaryMask<string intrinsic,
string inst,
string kind,
ValueType result_type,
ValueType op1_type,
ValueType op2_type,
ValueType mask_type,
int sew,
LMULInfo vlmul,
VReg result_reg_class,
RegisterClass op1_reg_class,
DAGOperand op2_kind> :
Pat<(result_type (!cast<Intrinsic>(intrinsic#"_mask")
(result_type result_reg_class:$rs3),
(op1_type op1_reg_class:$rs1),
(op2_type op2_kind:$rs2),
(mask_type V0),
(XLenVT GPR:$vl))),
(!cast<Instruction>(inst#"_"#kind#"_"#vlmul.MX # "_MASK")
result_reg_class:$rs3,
(op1_type op1_reg_class:$rs1),
op2_kind:$rs2,
(mask_type V0),
(NoX0 GPR:$vl), sew)>;
class VPatAMOWDNoMask<string intrinsic_name,
string inst,
ValueType result_type,
ValueType op1_type,
int sew,
LMULInfo vlmul,
LMULInfo emul,
VReg op1_reg_class> :
Pat<(result_type (!cast<Intrinsic>(intrinsic_name)
GPR:$rs1,
(op1_type op1_reg_class:$vs2),
(result_type vlmul.vrclass:$vd),
(XLenVT GPR:$vl))),
(!cast<Instruction>(inst # "_WD_" # vlmul.MX # "_" # emul.MX)
$rs1, $vs2, $vd,
(NoX0 GPR:$vl), sew)>;
class VPatAMOWDMask<string intrinsic_name,
string inst,
ValueType result_type,
ValueType op1_type,
ValueType mask_type,
int sew,
LMULInfo vlmul,
LMULInfo emul,
VReg op1_reg_class> :
Pat<(result_type (!cast<Intrinsic>(intrinsic_name # "_mask")
GPR:$rs1,
(op1_type op1_reg_class:$vs2),
(result_type vlmul.vrclass:$vd),
(mask_type V0),
(XLenVT GPR:$vl))),
(!cast<Instruction>(inst # "_WD_" # vlmul.MX # "_" # emul.MX # "_MASK")
$rs1, $vs2, $vd,
(mask_type V0), (NoX0 GPR:$vl), sew)>;
multiclass VPatUSLoad<string intrinsic,
string inst,
LLVMType type,
LLVMType mask_type,
int sew,
LMULInfo vlmul,
VReg reg_class>
{
defvar Intr = !cast<Intrinsic>(intrinsic);
defvar Pseudo = !cast<Instruction>(inst#"_V_"#vlmul.MX);
def : Pat<(type (Intr GPR:$rs1, GPR:$vl)),
(Pseudo $rs1, (NoX0 GPR:$vl), sew)>;
defvar IntrMask = !cast<Intrinsic>(intrinsic # "_mask");
defvar PseudoMask = !cast<Instruction>(inst#"_V_"#vlmul.MX#"_MASK");
def : Pat<(type (IntrMask (type GetVRegNoV0<reg_class>.R:$merge),
GPR:$rs1, (mask_type V0), GPR:$vl)),
(PseudoMask $merge,
$rs1, (mask_type V0), (NoX0 GPR:$vl), sew)>;
}
multiclass VPatUSLoadFF<string inst,
LLVMType type,
LLVMType mask_type,
int sew,
LMULInfo vlmul,
VReg reg_class>
{
defvar Pseudo = !cast<Instruction>(inst#"_V_"#vlmul.MX);
def : Pat<(type (riscv_vleff GPR:$rs1, GPR:$vl)),
(Pseudo $rs1, (NoX0 GPR:$vl), sew)>;
defvar PseudoMask = !cast<Instruction>(inst#"_V_"#vlmul.MX#"_MASK");
def : Pat<(type (riscv_vleff_mask (type GetVRegNoV0<reg_class>.R:$merge),
GPR:$rs1, (mask_type V0), GPR:$vl)),
(PseudoMask $merge,
$rs1, (mask_type V0), (NoX0 GPR:$vl), sew)>;
}
multiclass VPatSLoad<string intrinsic,
string inst,
LLVMType type,
LLVMType mask_type,
int sew,
LMULInfo vlmul,
VReg reg_class>
{
defvar Intr = !cast<Intrinsic>(intrinsic);
defvar Pseudo = !cast<Instruction>(inst#"_V_"#vlmul.MX);
def : Pat<(type (Intr GPR:$rs1, GPR:$rs2, GPR:$vl)),
(Pseudo $rs1, $rs2, (NoX0 GPR:$vl), sew)>;
defvar IntrMask = !cast<Intrinsic>(intrinsic # "_mask");
defvar PseudoMask = !cast<Instruction>(inst#"_V_"#vlmul.MX#"_MASK");
def : Pat<(type (IntrMask (type GetVRegNoV0<reg_class>.R:$merge),
GPR:$rs1, GPR:$rs2, (mask_type V0), GPR:$vl)),
(PseudoMask $merge,
$rs1, $rs2, (mask_type V0), (NoX0 GPR:$vl), sew)>;
}
multiclass VPatILoad<string intrinsic,
string inst,
LLVMType type,
LLVMType idx_type,
LLVMType mask_type,
int sew,
LMULInfo vlmul,
LMULInfo idx_vlmul,
VReg reg_class,
VReg idx_reg_class>
{
defvar Intr = !cast<Intrinsic>(intrinsic);
defvar Pseudo = !cast<Instruction>(inst#"_V_"#idx_vlmul.MX#"_"#vlmul.MX);
def : Pat<(type (Intr GPR:$rs1, (idx_type idx_reg_class:$rs2), GPR:$vl)),
(Pseudo $rs1, $rs2, (NoX0 GPR:$vl), sew)>;
defvar IntrMask = !cast<Intrinsic>(intrinsic # "_mask");
defvar PseudoMask = !cast<Instruction>(inst#"_V_"#idx_vlmul.MX#"_"#vlmul.MX#"_MASK");
def : Pat<(type (IntrMask (type GetVRegNoV0<reg_class>.R:$merge),
GPR:$rs1, (idx_type idx_reg_class:$rs2),
(mask_type V0), GPR:$vl)),
(PseudoMask $merge,
$rs1, $rs2, (mask_type V0), (NoX0 GPR:$vl), sew)>;
}
multiclass VPatUSStore<string intrinsic,
string inst,
LLVMType type,
LLVMType mask_type,
int sew,
LMULInfo vlmul,
VReg reg_class>
{
defvar Intr = !cast<Intrinsic>(intrinsic);
defvar Pseudo = !cast<Instruction>(inst#"_V_"#vlmul.MX);
def : Pat<(Intr (type reg_class:$rs3), GPR:$rs1, GPR:$vl),
(Pseudo $rs3, $rs1, (NoX0 GPR:$vl), sew)>;
defvar IntrMask = !cast<Intrinsic>(intrinsic # "_mask");
defvar PseudoMask = !cast<Instruction>(inst#"_V_"#vlmul.MX#"_MASK");
def : Pat<(IntrMask (type reg_class:$rs3), GPR:$rs1, (mask_type V0), GPR:$vl),
(PseudoMask $rs3, $rs1, (mask_type V0), (NoX0 GPR:$vl), sew)>;
}
multiclass VPatSStore<string intrinsic,
string inst,
LLVMType type,
LLVMType mask_type,
int sew,
LMULInfo vlmul,
VReg reg_class>
{
defvar Intr = !cast<Intrinsic>(intrinsic);
defvar Pseudo = !cast<Instruction>(inst#"_V_"#vlmul.MX);
def : Pat<(Intr (type reg_class:$rs3), GPR:$rs1, GPR:$rs2, GPR:$vl),
(Pseudo $rs3, $rs1, $rs2, (NoX0 GPR:$vl), sew)>;
defvar IntrMask = !cast<Intrinsic>(intrinsic # "_mask");
defvar PseudoMask = !cast<Instruction>(inst#"_V_"#vlmul.MX#"_MASK");
def : Pat<(IntrMask (type reg_class:$rs3), GPR:$rs1, GPR:$rs2, (mask_type V0), GPR:$vl),
(PseudoMask $rs3, $rs1, $rs2, (mask_type V0), (NoX0 GPR:$vl), sew)>;
}
multiclass VPatIStore<string intrinsic,
string inst,
LLVMType type,
LLVMType idx_type,
LLVMType mask_type,
int sew,
LMULInfo vlmul,
LMULInfo idx_vlmul,
VReg reg_class,
VReg idx_reg_class>
{
defvar Intr = !cast<Intrinsic>(intrinsic);
defvar Pseudo = !cast<Instruction>(inst#"_V_"#idx_vlmul.MX#"_"#vlmul.MX);
def : Pat<(Intr (type reg_class:$rs3), GPR:$rs1,
(idx_type idx_reg_class:$rs2), GPR:$vl),
(Pseudo $rs3, $rs1, $rs2, (NoX0 GPR:$vl), sew)>;
defvar IntrMask = !cast<Intrinsic>(intrinsic # "_mask");
defvar PseudoMask = !cast<Instruction>(inst#"_V_"#idx_vlmul.MX#"_"#vlmul.MX#"_MASK");
def : Pat<(IntrMask (type reg_class:$rs3), GPR:$rs1,
(idx_type idx_reg_class:$rs2), (mask_type V0), GPR:$vl),
(PseudoMask $rs3, $rs1, $rs2, (mask_type V0), (NoX0 GPR:$vl), sew)>;
}
multiclass VPatUnaryS_M<string intrinsic_name,
string inst>
{
foreach mti = AllMasks in {
def : Pat<(XLenVT (!cast<Intrinsic>(intrinsic_name)
(mti.Mask VR:$rs1), GPR:$vl)),
(!cast<Instruction>(inst#"_M_"#mti.BX) $rs1,
(NoX0 GPR:$vl), mti.SEW)>;
def : Pat<(XLenVT (!cast<Intrinsic>(intrinsic_name # "_mask")
(mti.Mask VR:$rs1), (mti.Mask V0), GPR:$vl)),
(!cast<Instruction>(inst#"_M_"#mti.BX#"_MASK") $rs1,
(mti.Mask V0), (NoX0 GPR:$vl), mti.SEW)>;
}
}
multiclass VPatUnaryV_V_AnyMask<string intrinsic, string instruction,
list<VTypeInfo> vtilist> {
foreach vti = vtilist in {
def : VPatUnaryAnyMask<intrinsic, instruction, "VM",
vti.Vector, vti.Vector, vti.Mask,
vti.SEW, vti.LMul, vti.RegClass,
vti.RegClass>;
}
}
multiclass VPatUnaryM_M<string intrinsic,
string inst>
{
foreach mti = AllMasks in {
def : VPatMaskUnaryNoMask<intrinsic, inst, mti>;
def : VPatMaskUnaryMask<intrinsic, inst, mti>;
}
}
multiclass VPatUnaryV_M<string intrinsic, string instruction>
{
foreach vti = AllIntegerVectors in {
def : VPatUnaryNoMask<intrinsic, instruction, "M", vti.Vector, vti.Mask,
vti.SEW, vti.LMul, VR>;
def : VPatUnaryMask<intrinsic, instruction, "M", vti.Vector, vti.Mask,
vti.Mask, vti.SEW, vti.LMul, vti.RegClass, VR>;
}
}
multiclass VPatUnaryV_VF<string intrinsic, string instruction, string suffix,
list<VTypeInfoToFraction> fractionList>
{
foreach vtiTofti = fractionList in
{
defvar vti = vtiTofti.Vti;
defvar fti = vtiTofti.Fti;
def : VPatUnaryNoMask<intrinsic, instruction, suffix,
vti.Vector, fti.Vector,
vti.SEW, vti.LMul, fti.RegClass>;
def : VPatUnaryMask<intrinsic, instruction, suffix,
vti.Vector, fti.Vector, vti.Mask,
vti.SEW, vti.LMul, vti.RegClass, fti.RegClass>;
}
}
multiclass VPatUnaryV_V<string intrinsic, string instruction,
list<VTypeInfo> vtilist> {
foreach vti = vtilist in {
def : VPatUnaryNoMask<intrinsic, instruction, "V",
vti.Vector, vti.Vector,
vti.SEW, vti.LMul, vti.RegClass>;
def : VPatUnaryMask<intrinsic, instruction, "V",
vti.Vector, vti.Vector, vti.Mask,
vti.SEW, vti.LMul, vti.RegClass, vti.RegClass>;
}
}
multiclass VPatNullaryV<string intrinsic, string instruction>
{
foreach vti = AllIntegerVectors in {
def : Pat<(vti.Vector (!cast<Intrinsic>(intrinsic)
(XLenVT GPR:$vl))),
(!cast<Instruction>(instruction#"_V_" # vti.LMul.MX)
(NoX0 GPR:$vl), vti.SEW)>;
def : Pat<(vti.Vector (!cast<Intrinsic>(intrinsic # "_mask")
(vti.Vector vti.RegClass:$merge),
(vti.Mask V0), (XLenVT GPR:$vl))),
(!cast<Instruction>(instruction#"_V_" # vti.LMul.MX # "_MASK")
vti.RegClass:$merge, (vti.Mask V0),
(NoX0 GPR:$vl), vti.SEW)>;
}
}
multiclass VPatNullaryM<string intrinsic, string inst> {
foreach mti = AllMasks in
def : Pat<(mti.Mask (!cast<Intrinsic>(intrinsic)
(XLenVT GPR:$vl))),
(!cast<Instruction>(inst#"_M_"#mti.BX)
(NoX0 GPR:$vl), mti.SEW)>;
}
multiclass VPatBinary<string intrinsic,
string inst,
ValueType result_type,
ValueType op1_type,
ValueType op2_type,
ValueType mask_type,
int sew,
VReg result_reg_class,
VReg op1_reg_class,
DAGOperand op2_kind>
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
{
def : VPatBinaryNoMask<intrinsic, inst, result_type, op1_type, op2_type,
sew, op1_reg_class, op2_kind>;
def : VPatBinaryMask<intrinsic, inst, result_type, op1_type, op2_type,
mask_type, sew, result_reg_class, op1_reg_class,
op2_kind>;
}
multiclass VPatBinaryCarryIn<string intrinsic,
string inst,
string kind,
ValueType result_type,
ValueType op1_type,
ValueType op2_type,
ValueType mask_type,
int sew,
LMULInfo vlmul,
VReg op1_reg_class,
DAGOperand op2_kind>
{
def : Pat<(result_type (!cast<Intrinsic>(intrinsic)
(op1_type op1_reg_class:$rs1),
(op2_type op2_kind:$rs2),
(mask_type V0),
(XLenVT GPR:$vl))),
(!cast<Instruction>(inst#"_"#kind#"_"#vlmul.MX)
(op1_type op1_reg_class:$rs1),
(op2_type op2_kind:$rs2),
(mask_type V0), (NoX0 GPR:$vl), sew)>;
}
multiclass VPatBinaryMaskOut<string intrinsic,
string inst,
string kind,
ValueType result_type,
ValueType op1_type,
ValueType op2_type,
int sew,
LMULInfo vlmul,
VReg op1_reg_class,
DAGOperand op2_kind>
{
def : Pat<(result_type (!cast<Intrinsic>(intrinsic)
(op1_type op1_reg_class:$rs1),
(op2_type op2_kind:$rs2),
(XLenVT GPR:$vl))),
(!cast<Instruction>(inst#"_"#kind#"_"#vlmul.MX)
(op1_type op1_reg_class:$rs1),
(op2_type op2_kind:$rs2),
(NoX0 GPR:$vl), sew)>;
}
multiclass VPatConversion<string intrinsic,
string inst,
string kind,
ValueType result_type,
ValueType op1_type,
ValueType mask_type,
int sew,
LMULInfo vlmul,
VReg result_reg_class,
VReg op1_reg_class>
{
def : VPatUnaryNoMask<intrinsic, inst, kind, result_type, op1_type,
sew, vlmul, op1_reg_class>;
def : VPatUnaryMask<intrinsic, inst, kind, result_type, op1_type,
mask_type, sew, vlmul, result_reg_class, op1_reg_class>;
}
multiclass VPatBinaryV_VV<string intrinsic, string instruction,
list<VTypeInfo> vtilist> {
foreach vti = vtilist in
defm : VPatBinary<intrinsic, instruction # "_VV_" # vti.LMul.MX,
vti.Vector, vti.Vector, vti.Vector,vti.Mask,
vti.SEW, vti.RegClass,
vti.RegClass, vti.RegClass>;
}
multiclass VPatBinaryV_VV_INT<string intrinsic, string instruction,
list<VTypeInfo> vtilist> {
foreach vti = vtilist in {
defvar ivti = GetIntVTypeInfo<vti>.Vti;
defm : VPatBinary<intrinsic, instruction # "_VV_" # vti.LMul.MX,
vti.Vector, vti.Vector, ivti.Vector, vti.Mask,
vti.SEW, vti.RegClass,
vti.RegClass, vti.RegClass>;
}
}
multiclass VPatBinaryV_VV_INT_EEW<string intrinsic, string instruction,
int eew, list<VTypeInfo> vtilist> {
foreach vti = vtilist in {
// emul = lmul * eew / sew
defvar vlmul = vti.LMul;
defvar octuple_lmul = octuple_from_str<vlmul.MX>.ret;
defvar octuple_emul = !srl(!mul(octuple_lmul, eew), shift_amount<vti.SEW>.val);
if !and(!ge(octuple_emul, 1), !le(octuple_emul, 64)) then {
defvar emul_str = octuple_to_str<octuple_emul>.ret;
defvar ivti = !cast<VTypeInfo>("VI" # eew # emul_str);
defvar inst = instruction # "_VV_" # vti.LMul.MX # "_" # emul_str;
defm : VPatBinary<intrinsic, inst,
vti.Vector, vti.Vector, ivti.Vector, vti.Mask,
vti.SEW, vti.RegClass,
vti.RegClass, ivti.RegClass>;
}
}
}
multiclass VPatBinaryV_VX<string intrinsic, string instruction,
list<VTypeInfo> vtilist> {
foreach vti = vtilist in {
defvar kind = getScalarSuffix<vti.Scalar>.suffix;
defm : VPatBinary<intrinsic, instruction#"_"#kind#"_"#vti.LMul.MX,
vti.Vector, vti.Vector, vti.Scalar, vti.Mask,
vti.SEW, vti.RegClass,
vti.RegClass, vti.ScalarRegClass>;
}
}
multiclass VPatBinaryV_VX_INT<string intrinsic, string instruction,
list<VTypeInfo> vtilist> {
foreach vti = vtilist in
defm : VPatBinary<intrinsic, instruction # "_VX_" # vti.LMul.MX,
vti.Vector, vti.Vector, XLenVT, vti.Mask,
vti.SEW, vti.RegClass,
vti.RegClass, GPR>;
}
multiclass VPatBinaryV_VI<string intrinsic, string instruction,
list<VTypeInfo> vtilist, Operand imm_type> {
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
foreach vti = vtilist in
defm : VPatBinary<intrinsic, instruction # "_VI_" # vti.LMul.MX,
vti.Vector, vti.Vector, XLenVT, vti.Mask,
vti.SEW, vti.RegClass,
vti.RegClass, imm_type>;
}
multiclass VPatBinaryM_MM<string intrinsic, string instruction> {
foreach mti = AllMasks in
def : VPatBinaryNoMask<intrinsic, instruction # "_MM_" # mti.LMul.MX,
mti.Mask, mti.Mask, mti.Mask,
mti.SEW, VR, VR>;
}
multiclass VPatBinaryW_VV<string intrinsic, string instruction,
list<VTypeInfoToWide> vtilist> {
foreach VtiToWti = vtilist in {
defvar Vti = VtiToWti.Vti;
defvar Wti = VtiToWti.Wti;
defm : VPatBinary<intrinsic, instruction # "_VV_" # Vti.LMul.MX,
Wti.Vector, Vti.Vector, Vti.Vector, Vti.Mask,
Vti.SEW, Wti.RegClass,
Vti.RegClass, Vti.RegClass>;
}
}
multiclass VPatBinaryW_VX<string intrinsic, string instruction,
list<VTypeInfoToWide> vtilist> {
foreach VtiToWti = vtilist in {
defvar Vti = VtiToWti.Vti;
defvar Wti = VtiToWti.Wti;
defvar kind = getScalarSuffix<Vti.Scalar>.suffix;
defm : VPatBinary<intrinsic, instruction#"_"#kind#"_"#Vti.LMul.MX,
Wti.Vector, Vti.Vector, Vti.Scalar, Vti.Mask,
Vti.SEW, Wti.RegClass,
Vti.RegClass, Vti.ScalarRegClass>;
}
}
multiclass VPatBinaryW_WV<string intrinsic, string instruction,
list<VTypeInfoToWide> vtilist> {
foreach VtiToWti = vtilist in {
defvar Vti = VtiToWti.Vti;
defvar Wti = VtiToWti.Wti;
defm : VPatBinary<intrinsic, instruction # "_WV_" # Vti.LMul.MX,
Wti.Vector, Wti.Vector, Vti.Vector, Vti.Mask,
Vti.SEW, Wti.RegClass,
Wti.RegClass, Vti.RegClass>;
}
}
multiclass VPatBinaryW_WX<string intrinsic, string instruction,
list<VTypeInfoToWide> vtilist> {
foreach VtiToWti = vtilist in {
defvar Vti = VtiToWti.Vti;
defvar Wti = VtiToWti.Wti;
defvar kind = getWScalarSuffix<Vti.Scalar>.suffix;
defm : VPatBinary<intrinsic, instruction#"_"#kind#"_"#Vti.LMul.MX,
Wti.Vector, Wti.Vector, Vti.Scalar, Vti.Mask,
Vti.SEW, Wti.RegClass,
Wti.RegClass, Vti.ScalarRegClass>;
}
}
multiclass VPatBinaryV_WV<string intrinsic, string instruction,
list<VTypeInfoToWide> vtilist> {
foreach VtiToWti = vtilist in {
defvar Vti = VtiToWti.Vti;
defvar Wti = VtiToWti.Wti;
defm : VPatBinary<intrinsic, instruction # "_WV_" # Vti.LMul.MX,
Vti.Vector, Wti.Vector, Vti.Vector, Vti.Mask,
Vti.SEW, Vti.RegClass,
Wti.RegClass, Vti.RegClass>;
}
}
multiclass VPatBinaryV_WX<string intrinsic, string instruction,
list<VTypeInfoToWide> vtilist> {
foreach VtiToWti = vtilist in {
defvar Vti = VtiToWti.Vti;
defvar Wti = VtiToWti.Wti;
defvar kind = getWScalarSuffix<Vti.Scalar>.suffix;
defm : VPatBinary<intrinsic, instruction#"_"#kind#"_"#Vti.LMul.MX,
Vti.Vector, Wti.Vector, Vti.Scalar, Vti.Mask,
Vti.SEW, Vti.RegClass,
Wti.RegClass, Vti.ScalarRegClass>;
}
}
multiclass VPatBinaryV_WI<string intrinsic, string instruction,
list<VTypeInfoToWide> vtilist> {
foreach VtiToWti = vtilist in {
defvar Vti = VtiToWti.Vti;
defvar Wti = VtiToWti.Wti;
defm : VPatBinary<intrinsic, instruction # "_WI_" # Vti.LMul.MX,
Vti.Vector, Wti.Vector, XLenVT, Vti.Mask,
Vti.SEW, Vti.RegClass,
Wti.RegClass, uimm5>;
}
}
multiclass VPatBinaryV_VM<string intrinsic, string instruction,
bit CarryOut = 0,
list<VTypeInfo> vtilist = AllIntegerVectors> {
foreach vti = vtilist in
defm : VPatBinaryCarryIn<intrinsic, instruction, "VVM",
!if(CarryOut, vti.Mask, vti.Vector),
vti.Vector, vti.Vector, vti.Mask,
vti.SEW, vti.LMul,
vti.RegClass, vti.RegClass>;
}
multiclass VPatBinaryV_XM<string intrinsic, string instruction,
bit CarryOut = 0,
list<VTypeInfo> vtilist = AllIntegerVectors> {
foreach vti = vtilist in
defm : VPatBinaryCarryIn<intrinsic, instruction,
!cond(!eq(vti.Scalar, XLenVT): "VXM",
!eq(vti.Scalar, f16): "VFM_F16",
!eq(vti.Scalar, f32): "VFM_F32",
!eq(vti.Scalar, f64): "VFM_F64"),
!if(CarryOut, vti.Mask, vti.Vector),
vti.Vector, vti.Scalar, vti.Mask,
vti.SEW, vti.LMul,
vti.RegClass, vti.ScalarRegClass>;
}
multiclass VPatBinaryV_IM<string intrinsic, string instruction,
bit CarryOut = 0> {
foreach vti = AllIntegerVectors in
defm : VPatBinaryCarryIn<intrinsic, instruction, "VIM",
!if(CarryOut, vti.Mask, vti.Vector),
vti.Vector, XLenVT, vti.Mask,
vti.SEW, vti.LMul,
vti.RegClass, simm5>;
}
multiclass VPatBinaryV_V<string intrinsic, string instruction> {
foreach vti = AllIntegerVectors in
defm : VPatBinaryMaskOut<intrinsic, instruction, "VV",
vti.Mask, vti.Vector, vti.Vector,
vti.SEW, vti.LMul,
vti.RegClass, vti.RegClass>;
}
multiclass VPatBinaryV_X<string intrinsic, string instruction> {
foreach vti = AllIntegerVectors in
defm : VPatBinaryMaskOut<intrinsic, instruction, "VX",
vti.Mask, vti.Vector, XLenVT,
vti.SEW, vti.LMul,
vti.RegClass, GPR>;
}
multiclass VPatBinaryV_I<string intrinsic, string instruction> {
foreach vti = AllIntegerVectors in
defm : VPatBinaryMaskOut<intrinsic, instruction, "VI",
vti.Mask, vti.Vector, XLenVT,
vti.SEW, vti.LMul,
vti.RegClass, simm5>;
}
multiclass VPatBinaryM_VV<string intrinsic, string instruction,
list<VTypeInfo> vtilist> {
foreach vti = vtilist in
defm : VPatBinary<intrinsic, instruction # "_VV_" # vti.LMul.MX,
vti.Mask, vti.Vector, vti.Vector, vti.Mask,
vti.SEW, VR,
vti.RegClass, vti.RegClass>;
}
multiclass VPatBinaryM_VX<string intrinsic, string instruction,
list<VTypeInfo> vtilist> {
foreach vti = vtilist in {
defvar kind = getScalarSuffix<vti.Scalar>.suffix;
defm : VPatBinary<intrinsic, instruction#"_"#kind#"_"#vti.LMul.MX,
vti.Mask, vti.Vector, vti.Scalar, vti.Mask,
vti.SEW, VR,
vti.RegClass, vti.ScalarRegClass>;
}
}
multiclass VPatBinaryM_VI<string intrinsic, string instruction,
list<VTypeInfo> vtilist> {
foreach vti = vtilist in
defm : VPatBinary<intrinsic, instruction # "_VI_" # vti.LMul.MX,
vti.Mask, vti.Vector, XLenVT, vti.Mask,
vti.SEW, VR,
vti.RegClass, simm5>;
}
multiclass VPatBinaryV_VV_VX_VI<string intrinsic, string instruction,
list<VTypeInfo> vtilist, Operand ImmType = simm5>
{
defm "" : VPatBinaryV_VV<intrinsic, instruction, vtilist>;
defm "" : VPatBinaryV_VX<intrinsic, instruction, vtilist>;
defm "" : VPatBinaryV_VI<intrinsic, instruction, vtilist, ImmType>;
}
multiclass VPatBinaryV_VV_VX<string intrinsic, string instruction,
list<VTypeInfo> vtilist>
{
defm "" : VPatBinaryV_VV<intrinsic, instruction, vtilist>;
defm "" : VPatBinaryV_VX<intrinsic, instruction, vtilist>;
}
multiclass VPatBinaryV_VX_VI<string intrinsic, string instruction,
list<VTypeInfo> vtilist>
{
defm "" : VPatBinaryV_VX<intrinsic, instruction, vtilist>;
defm "" : VPatBinaryV_VI<intrinsic, instruction, vtilist, simm5>;
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
}
multiclass VPatBinaryW_VV_VX<string intrinsic, string instruction,
list<VTypeInfoToWide> vtilist>
{
defm "" : VPatBinaryW_VV<intrinsic, instruction, vtilist>;
defm "" : VPatBinaryW_VX<intrinsic, instruction, vtilist>;
}
multiclass VPatBinaryW_WV_WX<string intrinsic, string instruction,
list<VTypeInfoToWide> vtilist>
{
defm "" : VPatBinaryW_WV<intrinsic, instruction, vtilist>;
defm "" : VPatBinaryW_WX<intrinsic, instruction, vtilist>;
}
multiclass VPatBinaryV_WV_WX_WI<string intrinsic, string instruction,
list<VTypeInfoToWide> vtilist>
{
defm "" : VPatBinaryV_WV<intrinsic, instruction, vtilist>;
defm "" : VPatBinaryV_WX<intrinsic, instruction, vtilist>;
defm "" : VPatBinaryV_WI<intrinsic, instruction, vtilist>;
}
multiclass VPatBinaryV_VM_XM_IM<string intrinsic, string instruction>
{
defm "" : VPatBinaryV_VM<intrinsic, instruction>;
defm "" : VPatBinaryV_XM<intrinsic, instruction>;
defm "" : VPatBinaryV_IM<intrinsic, instruction>;
}
multiclass VPatBinaryM_VM_XM_IM<string intrinsic, string instruction>
{
defm "" : VPatBinaryV_VM<intrinsic, instruction, /*CarryOut=*/1>;
defm "" : VPatBinaryV_XM<intrinsic, instruction, /*CarryOut=*/1>;
defm "" : VPatBinaryV_IM<intrinsic, instruction, /*CarryOut=*/1>;
}
multiclass VPatBinaryM_V_X_I<string intrinsic, string instruction>
{
defm "" : VPatBinaryV_V<intrinsic, instruction>;
defm "" : VPatBinaryV_X<intrinsic, instruction>;
defm "" : VPatBinaryV_I<intrinsic, instruction>;
}
multiclass VPatBinaryV_VM_XM<string intrinsic, string instruction>
{
defm "" : VPatBinaryV_VM<intrinsic, instruction>;
defm "" : VPatBinaryV_XM<intrinsic, instruction>;
}
multiclass VPatBinaryM_VM_XM<string intrinsic, string instruction>
{
defm "" : VPatBinaryV_VM<intrinsic, instruction, /*CarryOut=*/1>;
defm "" : VPatBinaryV_XM<intrinsic, instruction, /*CarryOut=*/1>;
}
multiclass VPatBinaryM_V_X<string intrinsic, string instruction>
{
defm "" : VPatBinaryV_V<intrinsic, instruction>;
defm "" : VPatBinaryV_X<intrinsic, instruction>;
}
multiclass VPatTernary<string intrinsic,
string inst,
string kind,
ValueType result_type,
ValueType op1_type,
ValueType op2_type,
ValueType mask_type,
int sew,
LMULInfo vlmul,
VReg result_reg_class,
RegisterClass op1_reg_class,
DAGOperand op2_kind> {
def : VPatTernaryNoMask<intrinsic, inst, kind, result_type, op1_type, op2_type,
mask_type, sew, vlmul, result_reg_class, op1_reg_class,
op2_kind>;
def : VPatTernaryMask<intrinsic, inst, kind, result_type, op1_type, op2_type,
mask_type, sew, vlmul, result_reg_class, op1_reg_class,
op2_kind>;
}
multiclass VPatTernaryV_VV<string intrinsic, string instruction,
list<VTypeInfo> vtilist> {
foreach vti = vtilist in
defm : VPatTernary<intrinsic, instruction, "VV",
vti.Vector, vti.Vector, vti.Vector, vti.Mask,
vti.SEW, vti.LMul, vti.RegClass,
vti.RegClass, vti.RegClass>;
}
multiclass VPatTernaryV_VX<string intrinsic, string instruction,
list<VTypeInfo> vtilist> {
foreach vti = vtilist in
defm : VPatTernary<intrinsic, instruction, "VX",
vti.Vector, vti.Vector, XLenVT, vti.Mask,
vti.SEW, vti.LMul, vti.RegClass,
vti.RegClass, GPR>;
}
multiclass VPatTernaryV_VX_AAXA<string intrinsic, string instruction,
list<VTypeInfo> vtilist> {
foreach vti = vtilist in
defm : VPatTernary<intrinsic, instruction,
getScalarSuffix<vti.Scalar>.suffix,
vti.Vector, vti.Scalar, vti.Vector, vti.Mask,
vti.SEW, vti.LMul, vti.RegClass,
vti.ScalarRegClass, vti.RegClass>;
}
multiclass VPatTernaryV_VI<string intrinsic, string instruction,
list<VTypeInfo> vtilist, Operand Imm_type> {
foreach vti = vtilist in
defm : VPatTernary<intrinsic, instruction, "VI",
vti.Vector, vti.Vector, XLenVT, vti.Mask,
vti.SEW, vti.LMul, vti.RegClass,
vti.RegClass, Imm_type>;
}
multiclass VPatTernaryW_VV<string intrinsic, string instruction,
list<VTypeInfoToWide> vtilist> {
foreach vtiToWti = vtilist in {
defvar vti = vtiToWti.Vti;
defvar wti = vtiToWti.Wti;
defm : VPatTernary<intrinsic, instruction, "VV",
wti.Vector, vti.Vector, vti.Vector,
vti.Mask, vti.SEW, vti.LMul,
wti.RegClass, vti.RegClass, vti.RegClass>;
}
}
multiclass VPatTernaryW_VX<string intrinsic, string instruction,
list<VTypeInfoToWide> vtilist> {
foreach vtiToWti = vtilist in {
defvar vti = vtiToWti.Vti;
defvar wti = vtiToWti.Wti;
defm : VPatTernary<intrinsic, instruction,
getScalarSuffix<vti.Scalar>.suffix,
wti.Vector, vti.Scalar, vti.Vector,
vti.Mask, vti.SEW, vti.LMul,
wti.RegClass, vti.ScalarRegClass, vti.RegClass>;
}
}
multiclass VPatTernaryV_VV_VX_AAXA<string intrinsic, string instruction,
list<VTypeInfo> vtilist> {
defm "" : VPatTernaryV_VV<intrinsic, instruction, vtilist>;
defm "" : VPatTernaryV_VX_AAXA<intrinsic, instruction, vtilist>;
}
multiclass VPatTernaryV_VX_VI<string intrinsic, string instruction,
list<VTypeInfo> vtilist, Operand Imm_type = simm5> {
defm "" : VPatTernaryV_VX<intrinsic, instruction, vtilist>;
defm "" : VPatTernaryV_VI<intrinsic, instruction, vtilist, Imm_type>;
}
multiclass VPatBinaryM_VV_VX_VI<string intrinsic, string instruction,
list<VTypeInfo> vtilist>
{
defm "" : VPatBinaryM_VV<intrinsic, instruction, vtilist>;
defm "" : VPatBinaryM_VX<intrinsic, instruction, vtilist>;
defm "" : VPatBinaryM_VI<intrinsic, instruction, vtilist>;
}
multiclass VPatTernaryW_VV_VX<string intrinsic, string instruction,
list<VTypeInfoToWide> vtilist> {
defm "" : VPatTernaryW_VV<intrinsic, instruction, vtilist>;
defm "" : VPatTernaryW_VX<intrinsic, instruction, vtilist>;
}
multiclass VPatBinaryM_VV_VX<string intrinsic, string instruction,
list<VTypeInfo> vtilist>
{
defm "" : VPatBinaryM_VV<intrinsic, instruction, vtilist>;
defm "" : VPatBinaryM_VX<intrinsic, instruction, vtilist>;
}
multiclass VPatBinaryM_VX_VI<string intrinsic, string instruction,
list<VTypeInfo> vtilist>
{
defm "" : VPatBinaryM_VX<intrinsic, instruction, vtilist>;
defm "" : VPatBinaryM_VI<intrinsic, instruction, vtilist>;
}
multiclass VPatBinaryV_VV_VX_VI_INT<string intrinsic, string instruction,
list<VTypeInfo> vtilist, Operand ImmType = simm5>
{
defm "" : VPatBinaryV_VV_INT<intrinsic, instruction, vtilist>;
defm "" : VPatBinaryV_VX_INT<intrinsic, instruction, vtilist>;
defm "" : VPatBinaryV_VI<intrinsic, instruction, vtilist, ImmType>;
}
multiclass VPatReductionV_VS<string intrinsic, string instruction, bit IsFloat = 0> {
foreach vti = !if(IsFloat, NoGroupFloatVectors, NoGroupIntegerVectors) in
{
defvar vectorM1 = !cast<VTypeInfo>(!if(IsFloat, "VF", "VI") # vti.SEW # "M1");
defm : VPatTernary<intrinsic, instruction, "VS",
vectorM1.Vector, vti.Vector,
vectorM1.Vector, vti.Mask,
vti.SEW, vti.LMul,
VR, vti.RegClass, VR>;
}
foreach gvti = !if(IsFloat, GroupFloatVectors, GroupIntegerVectors) in
{
defm : VPatTernary<intrinsic, instruction, "VS",
gvti.VectorM1, gvti.Vector,
gvti.VectorM1, gvti.Mask,
gvti.SEW, gvti.LMul,
VR, gvti.RegClass, VR>;
}
}
multiclass VPatReductionW_VS<string intrinsic, string instruction, bit IsFloat = 0> {
foreach vti = !if(IsFloat, AllFloatVectors, AllIntegerVectors) in
{
defvar wtiSEW = !mul(vti.SEW, 2);
if !le(wtiSEW, 64) then {
defvar wtiM1 = !cast<VTypeInfo>(!if(IsFloat, "VF", "VI") # wtiSEW # "M1");
defm : VPatTernary<intrinsic, instruction, "VS",
wtiM1.Vector, vti.Vector,
wtiM1.Vector, vti.Mask,
vti.SEW, vti.LMul,
wtiM1.RegClass, vti.RegClass,
wtiM1.RegClass>;
}
}
}
multiclass VPatConversionVI_VF<string intrinsic,
string instruction>
{
foreach fvti = AllFloatVectors in
{
defvar ivti = GetIntVTypeInfo<fvti>.Vti;
defm : VPatConversion<intrinsic, instruction, "V",
ivti.Vector, fvti.Vector, ivti.Mask, fvti.SEW,
fvti.LMul, ivti.RegClass, fvti.RegClass>;
}
}
multiclass VPatConversionVF_VI<string intrinsic,
string instruction>
{
foreach fvti = AllFloatVectors in
{
defvar ivti = GetIntVTypeInfo<fvti>.Vti;
defm : VPatConversion<intrinsic, instruction, "V",
fvti.Vector, ivti.Vector, fvti.Mask, ivti.SEW,
ivti.LMul, fvti.RegClass, ivti.RegClass>;
}
}
multiclass VPatConversionWI_VF<string intrinsic, string instruction> {
foreach fvtiToFWti = AllWidenableFloatVectors in
{
defvar fvti = fvtiToFWti.Vti;
defvar iwti = GetIntVTypeInfo<fvtiToFWti.Wti>.Vti;
defm : VPatConversion<intrinsic, instruction, "V",
iwti.Vector, fvti.Vector, iwti.Mask, fvti.SEW,
fvti.LMul, iwti.RegClass, fvti.RegClass>;
}
}
multiclass VPatConversionWF_VI<string intrinsic, string instruction> {
foreach vtiToWti = AllWidenableIntToFloatVectors in
{
defvar vti = vtiToWti.Vti;
defvar fwti = vtiToWti.Wti;
defm : VPatConversion<intrinsic, instruction, "V",
fwti.Vector, vti.Vector, fwti.Mask, vti.SEW,
vti.LMul, fwti.RegClass, vti.RegClass>;
}
}
multiclass VPatConversionWF_VF <string intrinsic, string instruction> {
foreach fvtiToFWti = AllWidenableFloatVectors in
{
defvar fvti = fvtiToFWti.Vti;
defvar fwti = fvtiToFWti.Wti;
defm : VPatConversion<intrinsic, instruction, "V",
fwti.Vector, fvti.Vector, fwti.Mask, fvti.SEW,
fvti.LMul, fwti.RegClass, fvti.RegClass>;
}
}
multiclass VPatConversionVI_WF <string intrinsic, string instruction> {
foreach vtiToWti = AllWidenableIntToFloatVectors in
{
defvar vti = vtiToWti.Vti;
defvar fwti = vtiToWti.Wti;
defm : VPatConversion<intrinsic, instruction, "W",
vti.Vector, fwti.Vector, vti.Mask, vti.SEW,
vti.LMul, vti.RegClass, fwti.RegClass>;
}
}
multiclass VPatConversionVF_WI <string intrinsic, string instruction> {
foreach fvtiToFWti = AllWidenableFloatVectors in
{
defvar fvti = fvtiToFWti.Vti;
defvar iwti = GetIntVTypeInfo<fvtiToFWti.Wti>.Vti;
defm : VPatConversion<intrinsic, instruction, "W",
fvti.Vector, iwti.Vector, fvti.Mask, fvti.SEW,
fvti.LMul, fvti.RegClass, iwti.RegClass>;
}
}
multiclass VPatConversionVF_WF <string intrinsic, string instruction> {
foreach fvtiToFWti = AllWidenableFloatVectors in
{
defvar fvti = fvtiToFWti.Vti;
defvar fwti = fvtiToFWti.Wti;
defm : VPatConversion<intrinsic, instruction, "W",
fvti.Vector, fwti.Vector, fvti.Mask, fvti.SEW,
fvti.LMul, fvti.RegClass, fwti.RegClass>;
}
}
multiclass VPatAMOWD<string intrinsic,
string inst,
ValueType result_type,
ValueType offset_type,
ValueType mask_type,
int sew,
LMULInfo vlmul,
LMULInfo emul,
VReg op1_reg_class>
{
def : VPatAMOWDNoMask<intrinsic, inst, result_type, offset_type,
sew, vlmul, emul, op1_reg_class>;
def : VPatAMOWDMask<intrinsic, inst, result_type, offset_type,
mask_type, sew, vlmul, emul, op1_reg_class>;
}
multiclass VPatAMOV_WD<string intrinsic,
string inst,
list<VTypeInfo> vtilist> {
foreach eew = EEWList in {
foreach vti = vtilist in {
if !or(!eq(vti.SEW, 32), !eq(vti.SEW, 64)) then {
defvar octuple_lmul = octuple_from_str<vti.LMul.MX>.ret;
// Calculate emul = eew * lmul / sew
defvar octuple_emul = !srl(!mul(eew, octuple_lmul), shift_amount<vti.SEW>.val);
if !and(!ge(octuple_emul, 1), !le(octuple_emul, 64)) then {
defvar emulMX = octuple_to_str<octuple_emul>.ret;
defvar offsetVti = !cast<VTypeInfo>("VI" # eew # emulMX);
defvar inst_ei = inst # "EI" # eew;
defm : VPatAMOWD<intrinsic, inst_ei,
vti.Vector, offsetVti.Vector,
vti.Mask, vti.SEW, vti.LMul, offsetVti.LMul, offsetVti.RegClass>;
}
}
}
}
}
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
//===----------------------------------------------------------------------===//
// Pseudo instructions
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
//===----------------------------------------------------------------------===//
let Predicates = [HasStdExtV] in {
//===----------------------------------------------------------------------===//
// Pseudo Instructions for CodeGen
//===----------------------------------------------------------------------===//
let hasSideEffects = 0, mayLoad = 0, mayStore = 0 in {
def PseudoVMV1R_V : VPseudo<VMV1R_V, V_M1, (outs VR:$vd), (ins VR:$vs2)>;
def PseudoVMV2R_V : VPseudo<VMV2R_V, V_M2, (outs VRM2:$vd), (ins VRM2:$vs2)>;
def PseudoVMV4R_V : VPseudo<VMV4R_V, V_M4, (outs VRM4:$vd), (ins VRM4:$vs2)>;
def PseudoVMV8R_V : VPseudo<VMV8R_V, V_M8, (outs VRM8:$vd), (ins VRM8:$vs2)>;
}
let hasSideEffects = 0, mayLoad = 0, mayStore = 0, isCodeGenOnly = 1 in {
def PseudoReadVLENB : Pseudo<(outs GPR:$rd), (ins),
[(set GPR:$rd, (riscv_read_vlenb))]>;
}
let hasSideEffects = 0, mayLoad = 0, mayStore = 0, isCodeGenOnly = 1,
Uses = [VL] in
def PseudoReadVL : Pseudo<(outs GPR:$rd), (ins),
[(set GPR:$rd, (riscv_read_vl))]>;
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
//===----------------------------------------------------------------------===//
// 6. Configuration-Setting Instructions
//===----------------------------------------------------------------------===//
// Pseudos.
let hasSideEffects = 1, mayLoad = 0, mayStore = 0, Defs = [VL, VTYPE] in {
def PseudoVSETVLI : Pseudo<(outs GPR:$rd), (ins GPR:$rs1, VTypeIOp:$vtypei), []>;
}
//===----------------------------------------------------------------------===//
// 7. Vector Loads and Stores
//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//
// 7.4 Vector Unit-Stride Instructions
//===----------------------------------------------------------------------===//
// Pseudos Unit-Stride Loads and Stores
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
foreach eew = EEWList in {
defm PseudoVLE # eew : VPseudoUSLoad;
defm PseudoVSE # eew : VPseudoUSStore;
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
}
//===----------------------------------------------------------------------===//
// 7.5 Vector Strided Instructions
//===----------------------------------------------------------------------===//
// Vector Strided Loads and Stores
foreach eew = EEWList in {
defm PseudoVLSE # eew : VPseudoSLoad;
defm PseudoVSSE # eew : VPseudoSStore;
}
//===----------------------------------------------------------------------===//
// 7.6 Vector Indexed Instructions
//===----------------------------------------------------------------------===//
// Vector Indexed Loads and Stores
foreach eew = EEWList in {
defm PseudoVLUXEI # eew : VPseudoILoad;
defm PseudoVLOXEI # eew : VPseudoILoad;
defm PseudoVSOXEI # eew : VPseudoIStore;
defm PseudoVSUXEI # eew : VPseudoIStore;
}
//===----------------------------------------------------------------------===//
// 7.7. Unit-stride Fault-Only-First Loads
//===----------------------------------------------------------------------===//
// vleff may update VL register
let hasSideEffects = 1, Defs = [VL] in
foreach eew = EEWList in {
defm PseudoVLE # eew # FF : VPseudoUSLoad;
}
//===----------------------------------------------------------------------===//
// 7.8. Vector Load/Store Segment Instructions
//===----------------------------------------------------------------------===//
defm PseudoVLSEG : VPseudoUSSegLoad</*fault-only-first*/false>;
defm PseudoVLSSEG : VPseudoSSegLoad;
defm PseudoVLOXSEG : VPseudoISegLoad;
defm PseudoVLUXSEG : VPseudoISegLoad;
defm PseudoVSSEG : VPseudoUSSegStore;
defm PseudoVSSSEG : VPseudoSSegStore;
defm PseudoVSOXSEG : VPseudoISegStore;
defm PseudoVSUXSEG : VPseudoISegStore;
// vlseg<nf>e<eew>ff.v may update VL register
let hasSideEffects = 1, Defs = [VL] in
defm PseudoVLSEG : VPseudoUSSegLoad</*fault-only-first*/true>;
//===----------------------------------------------------------------------===//
// 8. Vector AMO Operations
//===----------------------------------------------------------------------===//
defm PseudoVAMOSWAP : VPseudoAMO;
defm PseudoVAMOADD : VPseudoAMO;
defm PseudoVAMOXOR : VPseudoAMO;
defm PseudoVAMOAND : VPseudoAMO;
defm PseudoVAMOOR : VPseudoAMO;
defm PseudoVAMOMIN : VPseudoAMO;
defm PseudoVAMOMAX : VPseudoAMO;
defm PseudoVAMOMINU : VPseudoAMO;
defm PseudoVAMOMAXU : VPseudoAMO;
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
//===----------------------------------------------------------------------===//
// 12. Vector Integer Arithmetic Instructions
//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//
// 12.1. Vector Single-Width Integer Add and Subtract
//===----------------------------------------------------------------------===//
defm PseudoVADD : VPseudoBinaryV_VV_VX_VI;
defm PseudoVSUB : VPseudoBinaryV_VV_VX;
defm PseudoVRSUB : VPseudoBinaryV_VX_VI;
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
//===----------------------------------------------------------------------===//
// 12.2. Vector Widening Integer Add/Subtract
//===----------------------------------------------------------------------===//
defm PseudoVWADDU : VPseudoBinaryW_VV_VX;
defm PseudoVWSUBU : VPseudoBinaryW_VV_VX;
defm PseudoVWADD : VPseudoBinaryW_VV_VX;
defm PseudoVWSUB : VPseudoBinaryW_VV_VX;
defm PseudoVWADDU : VPseudoBinaryW_WV_WX;
defm PseudoVWSUBU : VPseudoBinaryW_WV_WX;
defm PseudoVWADD : VPseudoBinaryW_WV_WX;
defm PseudoVWSUB : VPseudoBinaryW_WV_WX;
//===----------------------------------------------------------------------===//
// 12.3. Vector Integer Extension
//===----------------------------------------------------------------------===//
defm PseudoVZEXT_VF2 : PseudoUnaryV_VF2;
defm PseudoVZEXT_VF4 : PseudoUnaryV_VF4;
defm PseudoVZEXT_VF8 : PseudoUnaryV_VF8;
defm PseudoVSEXT_VF2 : PseudoUnaryV_VF2;
defm PseudoVSEXT_VF4 : PseudoUnaryV_VF4;
defm PseudoVSEXT_VF8 : PseudoUnaryV_VF8;
//===----------------------------------------------------------------------===//
// 12.4. Vector Integer Add-with-Carry / Subtract-with-Borrow Instructions
//===----------------------------------------------------------------------===//
defm PseudoVADC : VPseudoBinaryV_VM_XM_IM;
defm PseudoVMADC : VPseudoBinaryM_VM_XM_IM<"@earlyclobber $rd">;
defm PseudoVMADC : VPseudoBinaryM_V_X_I<"@earlyclobber $rd">;
defm PseudoVSBC : VPseudoBinaryV_VM_XM;
defm PseudoVMSBC : VPseudoBinaryM_VM_XM<"@earlyclobber $rd">;
defm PseudoVMSBC : VPseudoBinaryM_V_X<"@earlyclobber $rd">;
//===----------------------------------------------------------------------===//
// 12.5. Vector Bitwise Logical Instructions
//===----------------------------------------------------------------------===//
defm PseudoVAND : VPseudoBinaryV_VV_VX_VI;
defm PseudoVOR : VPseudoBinaryV_VV_VX_VI;
defm PseudoVXOR : VPseudoBinaryV_VV_VX_VI;
//===----------------------------------------------------------------------===//
// 12.6. Vector Single-Width Bit Shift Instructions
//===----------------------------------------------------------------------===//
defm PseudoVSLL : VPseudoBinaryV_VV_VX_VI<uimm5>;
defm PseudoVSRL : VPseudoBinaryV_VV_VX_VI<uimm5>;
defm PseudoVSRA : VPseudoBinaryV_VV_VX_VI<uimm5>;
//===----------------------------------------------------------------------===//
// 12.7. Vector Narrowing Integer Right Shift Instructions
//===----------------------------------------------------------------------===//
defm PseudoVNSRL : VPseudoBinaryV_WV_WX_WI;
defm PseudoVNSRA : VPseudoBinaryV_WV_WX_WI;
//===----------------------------------------------------------------------===//
// 12.8. Vector Integer Comparison Instructions
//===----------------------------------------------------------------------===//
defm PseudoVMSEQ : VPseudoBinaryM_VV_VX_VI;
defm PseudoVMSNE : VPseudoBinaryM_VV_VX_VI;
defm PseudoVMSLTU : VPseudoBinaryM_VV_VX;
defm PseudoVMSLT : VPseudoBinaryM_VV_VX;
defm PseudoVMSLEU : VPseudoBinaryM_VV_VX_VI;
defm PseudoVMSLE : VPseudoBinaryM_VV_VX_VI;
defm PseudoVMSGTU : VPseudoBinaryM_VX_VI;
defm PseudoVMSGT : VPseudoBinaryM_VX_VI;
//===----------------------------------------------------------------------===//
// 12.9. Vector Integer Min/Max Instructions
//===----------------------------------------------------------------------===//
defm PseudoVMINU : VPseudoBinaryV_VV_VX;
defm PseudoVMIN : VPseudoBinaryV_VV_VX;
defm PseudoVMAXU : VPseudoBinaryV_VV_VX;
defm PseudoVMAX : VPseudoBinaryV_VV_VX;
//===----------------------------------------------------------------------===//
// 12.10. Vector Single-Width Integer Multiply Instructions
//===----------------------------------------------------------------------===//
defm PseudoVMUL : VPseudoBinaryV_VV_VX;
defm PseudoVMULH : VPseudoBinaryV_VV_VX;
defm PseudoVMULHU : VPseudoBinaryV_VV_VX;
defm PseudoVMULHSU : VPseudoBinaryV_VV_VX;
//===----------------------------------------------------------------------===//
// 12.11. Vector Integer Divide Instructions
//===----------------------------------------------------------------------===//
defm PseudoVDIVU : VPseudoBinaryV_VV_VX;
defm PseudoVDIV : VPseudoBinaryV_VV_VX;
defm PseudoVREMU : VPseudoBinaryV_VV_VX;
defm PseudoVREM : VPseudoBinaryV_VV_VX;
//===----------------------------------------------------------------------===//
// 12.12. Vector Widening Integer Multiply Instructions
//===----------------------------------------------------------------------===//
defm PseudoVWMUL : VPseudoBinaryW_VV_VX;
defm PseudoVWMULU : VPseudoBinaryW_VV_VX;
defm PseudoVWMULSU : VPseudoBinaryW_VV_VX;
//===----------------------------------------------------------------------===//
// 12.13. Vector Single-Width Integer Multiply-Add Instructions
//===----------------------------------------------------------------------===//
defm PseudoVMACC : VPseudoTernaryV_VV_VX_AAXA;
defm PseudoVNMSAC : VPseudoTernaryV_VV_VX_AAXA;
defm PseudoVMADD : VPseudoTernaryV_VV_VX_AAXA;
defm PseudoVNMSUB : VPseudoTernaryV_VV_VX_AAXA;
//===----------------------------------------------------------------------===//
// 12.14. Vector Widening Integer Multiply-Add Instructions
//===----------------------------------------------------------------------===//
defm PseudoVWMACCU : VPseudoTernaryW_VV_VX;
defm PseudoVWMACC : VPseudoTernaryW_VV_VX;
defm PseudoVWMACCSU : VPseudoTernaryW_VV_VX;
defm PseudoVWMACCUS : VPseudoTernaryW_VX;
//===----------------------------------------------------------------------===//
// 12.16. Vector Integer Merge Instructions
//===----------------------------------------------------------------------===//
defm PseudoVMERGE : VPseudoBinaryV_VM_XM_IM;
//===----------------------------------------------------------------------===//
// 12.17. Vector Integer Move Instructions
//===----------------------------------------------------------------------===//
defm PseudoVMV_V : VPseudoUnaryV_V_X_I_NoDummyMask;
//===----------------------------------------------------------------------===//
// 13.1. Vector Single-Width Saturating Add and Subtract
//===----------------------------------------------------------------------===//
let Defs = [VXSAT], hasSideEffects = 1 in {
defm PseudoVSADDU : VPseudoBinaryV_VV_VX_VI;
defm PseudoVSADD : VPseudoBinaryV_VV_VX_VI;
defm PseudoVSSUBU : VPseudoBinaryV_VV_VX;
defm PseudoVSSUB : VPseudoBinaryV_VV_VX;
}
//===----------------------------------------------------------------------===//
// 13.2. Vector Single-Width Averaging Add and Subtract
//===----------------------------------------------------------------------===//
let Uses = [VL, VTYPE, VXRM], hasSideEffects = 1 in {
defm PseudoVAADDU : VPseudoBinaryV_VV_VX;
defm PseudoVAADD : VPseudoBinaryV_VV_VX;
defm PseudoVASUBU : VPseudoBinaryV_VV_VX;
defm PseudoVASUB : VPseudoBinaryV_VV_VX;
}
//===----------------------------------------------------------------------===//
// 13.3. Vector Single-Width Fractional Multiply with Rounding and Saturation
//===----------------------------------------------------------------------===//
let Uses = [VL, VTYPE, VXRM], Defs = [VXSAT], hasSideEffects = 1 in {
defm PseudoVSMUL : VPseudoBinaryV_VV_VX;
}
//===----------------------------------------------------------------------===//
// 13.4. Vector Single-Width Scaling Shift Instructions
//===----------------------------------------------------------------------===//
let Uses = [VL, VTYPE, VXRM], hasSideEffects = 1 in {
defm PseudoVSSRL : VPseudoBinaryV_VV_VX_VI<uimm5>;
defm PseudoVSSRA : VPseudoBinaryV_VV_VX_VI<uimm5>;
}
//===----------------------------------------------------------------------===//
// 13.5. Vector Narrowing Fixed-Point Clip Instructions
//===----------------------------------------------------------------------===//
let Uses = [VL, VTYPE, VXRM], Defs = [VXSAT], hasSideEffects = 1 in {
defm PseudoVNCLIP : VPseudoBinaryV_WV_WX_WI;
defm PseudoVNCLIPU : VPseudoBinaryV_WV_WX_WI;
}
} // Predicates = [HasStdExtV]
let Predicates = [HasStdExtV, HasStdExtF] in {
//===----------------------------------------------------------------------===//
// 14.2. Vector Single-Width Floating-Point Add/Subtract Instructions
//===----------------------------------------------------------------------===//
defm PseudoVFADD : VPseudoBinaryV_VV_VF;
defm PseudoVFSUB : VPseudoBinaryV_VV_VF;
defm PseudoVFRSUB : VPseudoBinaryV_VF;
//===----------------------------------------------------------------------===//
// 14.3. Vector Widening Floating-Point Add/Subtract Instructions
//===----------------------------------------------------------------------===//
defm PseudoVFWADD : VPseudoBinaryW_VV_VF;
defm PseudoVFWSUB : VPseudoBinaryW_VV_VF;
defm PseudoVFWADD : VPseudoBinaryW_WV_WF;
defm PseudoVFWSUB : VPseudoBinaryW_WV_WF;
//===----------------------------------------------------------------------===//
// 14.4. Vector Single-Width Floating-Point Multiply/Divide Instructions
//===----------------------------------------------------------------------===//
defm PseudoVFMUL : VPseudoBinaryV_VV_VF;
defm PseudoVFDIV : VPseudoBinaryV_VV_VF;
defm PseudoVFRDIV : VPseudoBinaryV_VF;
//===----------------------------------------------------------------------===//
// 14.5. Vector Widening Floating-Point Multiply
//===----------------------------------------------------------------------===//
defm PseudoVFWMUL : VPseudoBinaryW_VV_VF;
//===----------------------------------------------------------------------===//
// 14.6. Vector Single-Width Floating-Point Fused Multiply-Add Instructions
//===----------------------------------------------------------------------===//
defm PseudoVFMACC : VPseudoTernaryV_VV_VF_AAXA;
defm PseudoVFNMACC : VPseudoTernaryV_VV_VF_AAXA;
defm PseudoVFMSAC : VPseudoTernaryV_VV_VF_AAXA;
defm PseudoVFNMSAC : VPseudoTernaryV_VV_VF_AAXA;
defm PseudoVFMADD : VPseudoTernaryV_VV_VF_AAXA;
defm PseudoVFNMADD : VPseudoTernaryV_VV_VF_AAXA;
defm PseudoVFMSUB : VPseudoTernaryV_VV_VF_AAXA;
defm PseudoVFNMSUB : VPseudoTernaryV_VV_VF_AAXA;
//===----------------------------------------------------------------------===//
// 14.7. Vector Widening Floating-Point Fused Multiply-Add Instructions
//===----------------------------------------------------------------------===//
defm PseudoVFWMACC : VPseudoTernaryW_VV_VF;
defm PseudoVFWNMACC : VPseudoTernaryW_VV_VF;
defm PseudoVFWMSAC : VPseudoTernaryW_VV_VF;
defm PseudoVFWNMSAC : VPseudoTernaryW_VV_VF;
//===----------------------------------------------------------------------===//
// 14.8. Vector Floating-Point Square-Root Instruction
//===----------------------------------------------------------------------===//
defm PseudoVFSQRT : VPseudoUnaryV_V;
//===----------------------------------------------------------------------===//
// 14.9. Vector Floating-Point Reciprocal Square-Root Estimate Instruction
//===----------------------------------------------------------------------===//
defm PseudoVFRSQRTE7 : VPseudoUnaryV_V;
//===----------------------------------------------------------------------===//
// 14.10. Vector Floating-Point Reciprocal Estimate Instruction
//===----------------------------------------------------------------------===//
defm PseudoVFRECE7 : VPseudoUnaryV_V;
//===----------------------------------------------------------------------===//
// 14.11. Vector Floating-Point Min/Max Instructions
//===----------------------------------------------------------------------===//
defm PseudoVFMIN : VPseudoBinaryV_VV_VF;
defm PseudoVFMAX : VPseudoBinaryV_VV_VF;
//===----------------------------------------------------------------------===//
// 14.12. Vector Floating-Point Sign-Injection Instructions
//===----------------------------------------------------------------------===//
defm PseudoVFSGNJ : VPseudoBinaryV_VV_VF;
defm PseudoVFSGNJN : VPseudoBinaryV_VV_VF;
defm PseudoVFSGNJX : VPseudoBinaryV_VV_VF;
//===----------------------------------------------------------------------===//
// 14.13. Vector Floating-Point Compare Instructions
//===----------------------------------------------------------------------===//
defm PseudoVMFEQ : VPseudoBinaryM_VV_VF;
defm PseudoVMFNE : VPseudoBinaryM_VV_VF;
defm PseudoVMFLT : VPseudoBinaryM_VV_VF;
defm PseudoVMFLE : VPseudoBinaryM_VV_VF;
defm PseudoVMFGT : VPseudoBinaryM_VF;
defm PseudoVMFGE : VPseudoBinaryM_VF;
//===----------------------------------------------------------------------===//
// 14.14. Vector Floating-Point Classify Instruction
//===----------------------------------------------------------------------===//
defm PseudoVFCLASS : VPseudoUnaryV_V;
//===----------------------------------------------------------------------===//
// 14.15. Vector Floating-Point Merge Instruction
//===----------------------------------------------------------------------===//
defm PseudoVFMERGE : VPseudoBinaryV_FM;
//===----------------------------------------------------------------------===//
// 14.16. Vector Floating-Point Move Instruction
//===----------------------------------------------------------------------===//
defm PseudoVFMV_V : VPseudoUnaryV_F_NoDummyMask;
//===----------------------------------------------------------------------===//
// 14.17. Single-Width Floating-Point/Integer Type-Convert Instructions
//===----------------------------------------------------------------------===//
defm PseudoVFCVT_XU_F : VPseudoConversionV_V;
defm PseudoVFCVT_X_F : VPseudoConversionV_V;
defm PseudoVFCVT_RTZ_XU_F : VPseudoConversionV_V;
defm PseudoVFCVT_RTZ_X_F : VPseudoConversionV_V;
defm PseudoVFCVT_F_XU : VPseudoConversionV_V;
defm PseudoVFCVT_F_X : VPseudoConversionV_V;
//===----------------------------------------------------------------------===//
// 14.18. Widening Floating-Point/Integer Type-Convert Instructions
//===----------------------------------------------------------------------===//
defm PseudoVFWCVT_XU_F : VPseudoConversionW_V;
defm PseudoVFWCVT_X_F : VPseudoConversionW_V;
defm PseudoVFWCVT_RTZ_XU_F : VPseudoConversionW_V;
defm PseudoVFWCVT_RTZ_X_F : VPseudoConversionW_V;
defm PseudoVFWCVT_F_XU : VPseudoConversionW_V;
defm PseudoVFWCVT_F_X : VPseudoConversionW_V;
defm PseudoVFWCVT_F_F : VPseudoConversionW_V;
//===----------------------------------------------------------------------===//
// 14.19. Narrowing Floating-Point/Integer Type-Convert Instructions
//===----------------------------------------------------------------------===//
defm PseudoVFNCVT_XU_F : VPseudoConversionV_W;
defm PseudoVFNCVT_X_F : VPseudoConversionV_W;
defm PseudoVFNCVT_RTZ_XU_F : VPseudoConversionV_W;
defm PseudoVFNCVT_RTZ_X_F : VPseudoConversionV_W;
defm PseudoVFNCVT_F_XU : VPseudoConversionV_W;
defm PseudoVFNCVT_F_X : VPseudoConversionV_W;
defm PseudoVFNCVT_F_F : VPseudoConversionV_W;
defm PseudoVFNCVT_ROD_F_F : VPseudoConversionV_W;
} // Predicates = [HasStdExtV, HasStdExtF]
let Predicates = [HasStdExtV] in {
//===----------------------------------------------------------------------===//
// 15.1. Vector Single-Width Integer Reduction Instructions
//===----------------------------------------------------------------------===//
defm PseudoVREDSUM : VPseudoReductionV_VS;
defm PseudoVREDAND : VPseudoReductionV_VS;
defm PseudoVREDOR : VPseudoReductionV_VS;
defm PseudoVREDXOR : VPseudoReductionV_VS;
defm PseudoVREDMINU : VPseudoReductionV_VS;
defm PseudoVREDMIN : VPseudoReductionV_VS;
defm PseudoVREDMAXU : VPseudoReductionV_VS;
defm PseudoVREDMAX : VPseudoReductionV_VS;
//===----------------------------------------------------------------------===//
// 15.2. Vector Widening Integer Reduction Instructions
//===----------------------------------------------------------------------===//
defm PseudoVWREDSUMU : VPseudoReductionV_VS;
defm PseudoVWREDSUM : VPseudoReductionV_VS;
} // Predicates = [HasStdExtV]
let Predicates = [HasStdExtV, HasStdExtF] in {
//===----------------------------------------------------------------------===//
// 15.3. Vector Single-Width Floating-Point Reduction Instructions
//===----------------------------------------------------------------------===//
defm PseudoVFREDOSUM : VPseudoReductionV_VS;
defm PseudoVFREDSUM : VPseudoReductionV_VS;
defm PseudoVFREDMIN : VPseudoReductionV_VS;
defm PseudoVFREDMAX : VPseudoReductionV_VS;
//===----------------------------------------------------------------------===//
// 15.4. Vector Widening Floating-Point Reduction Instructions
//===----------------------------------------------------------------------===//
defm PseudoVFWREDSUM : VPseudoReductionV_VS;
defm PseudoVFWREDOSUM : VPseudoReductionV_VS;
} // Predicates = [HasStdExtV, HasStdExtF]
//===----------------------------------------------------------------------===//
// 16. Vector Mask Instructions
//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//
// 16.1 Vector Mask-Register Logical Instructions
//===----------------------------------------------------------------------===//
defm PseudoVMAND: VPseudoBinaryM_MM;
defm PseudoVMNAND: VPseudoBinaryM_MM;
defm PseudoVMANDNOT: VPseudoBinaryM_MM;
defm PseudoVMXOR: VPseudoBinaryM_MM;
defm PseudoVMOR: VPseudoBinaryM_MM;
defm PseudoVMNOR: VPseudoBinaryM_MM;
defm PseudoVMORNOT: VPseudoBinaryM_MM;
defm PseudoVMXNOR: VPseudoBinaryM_MM;
// Pseudo insturctions
defm PseudoVMCLR : VPseudoNullaryPseudoM<"VMXOR">;
defm PseudoVMSET : VPseudoNullaryPseudoM<"VMXNOR">;
//===----------------------------------------------------------------------===//
// 16.2. Vector mask population count vpopc
//===----------------------------------------------------------------------===//
defm PseudoVPOPC: VPseudoUnaryS_M;
//===----------------------------------------------------------------------===//
// 16.3. vfirst find-first-set mask bit
//===----------------------------------------------------------------------===//
defm PseudoVFIRST: VPseudoUnaryS_M;
//===----------------------------------------------------------------------===//
// 16.4. vmsbf.m set-before-first mask bit
//===----------------------------------------------------------------------===//
defm PseudoVMSBF: VPseudoUnaryM_M;
//===----------------------------------------------------------------------===//
// 16.5. vmsif.m set-including-first mask bit
//===----------------------------------------------------------------------===//
defm PseudoVMSIF: VPseudoUnaryM_M;
//===----------------------------------------------------------------------===//
// 16.6. vmsof.m set-only-first mask bit
//===----------------------------------------------------------------------===//
defm PseudoVMSOF: VPseudoUnaryM_M;
//===----------------------------------------------------------------------===//
// 16.8. Vector Iota Instruction
//===----------------------------------------------------------------------===//
defm PseudoVIOTA_M: VPseudoUnaryV_M;
//===----------------------------------------------------------------------===//
// 16.9. Vector Element Index Instruction
//===----------------------------------------------------------------------===//
defm PseudoVID : VPseudoMaskNullaryV;
//===----------------------------------------------------------------------===//
// 17. Vector Permutation Instructions
//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//
// 17.1. Integer Scalar Move Instructions
//===----------------------------------------------------------------------===//
let Predicates = [HasStdExtV] in {
let mayLoad = 0, mayStore = 0, hasSideEffects = 0, usesCustomInserter = 1,
Uses = [VL, VTYPE] in {
foreach m = MxList.m in {
let VLMul = m.value in {
let HasSEWOp = 1, BaseInstr = VMV_X_S in
def PseudoVMV_X_S # "_" # m.MX: Pseudo<(outs GPR:$rd),
(ins m.vrclass:$rs2, ixlenimm:$sew),
[]>, RISCVVPseudo;
let HasVLOp = 1, HasSEWOp = 1, BaseInstr = VMV_S_X, WritesElement0 = 1,
Constraints = "$rd = $rs1" in
def PseudoVMV_S_X # "_" # m.MX: Pseudo<(outs m.vrclass:$rd),
(ins m.vrclass:$rs1, GPR:$rs2,
GPR:$vl, ixlenimm:$sew),
[]>, RISCVVPseudo;
}
}
}
} // Predicates = [HasStdExtV]
//===----------------------------------------------------------------------===//
// 17.2. Floating-Point Scalar Move Instructions
//===----------------------------------------------------------------------===//
let Predicates = [HasStdExtV, HasStdExtF] in {
let mayLoad = 0, mayStore = 0, hasSideEffects = 0, usesCustomInserter = 1,
Uses = [VL, VTYPE] in {
foreach m = MxList.m in {
foreach f = FPList.fpinfo in {
let VLMul = m.value in {
let HasSEWOp = 1, BaseInstr = VFMV_F_S in
def PseudoVFMV_F_S # "_" # f.FX # "_" # m.MX :
Pseudo<(outs f.fprclass:$rd),
(ins m.vrclass:$rs2,
ixlenimm:$sew),
[]>, RISCVVPseudo;
let HasVLOp = 1, HasSEWOp = 1, BaseInstr = VFMV_S_F, WritesElement0 = 1,
Constraints = "$rd = $rs1" in
def PseudoVFMV_S_F # "_" # f.FX #"_" # m.MX :
Pseudo<(outs m.vrclass:$rd),
(ins m.vrclass:$rs1, f.fprclass:$rs2,
GPR:$vl, ixlenimm:$sew),
[]>, RISCVVPseudo;
}
}
}
}
} // Predicates = [HasStdExtV, HasStdExtF]
//===----------------------------------------------------------------------===//
// 17.3. Vector Slide Instructions
//===----------------------------------------------------------------------===//
let Predicates = [HasStdExtV] in {
defm PseudoVSLIDEUP : VPseudoTernaryV_VX_VI<uimm5, "@earlyclobber $rd">;
defm PseudoVSLIDEDOWN : VPseudoTernaryV_VX_VI<uimm5>;
defm PseudoVSLIDE1UP : VPseudoBinaryV_VX<"@earlyclobber $rd">;
defm PseudoVSLIDE1DOWN : VPseudoBinaryV_VX;
} // Predicates = [HasStdExtV]
let Predicates = [HasStdExtV, HasStdExtF] in {
defm PseudoVFSLIDE1UP : VPseudoBinaryV_VF<"@earlyclobber $rd">;
defm PseudoVFSLIDE1DOWN : VPseudoBinaryV_VF;
} // Predicates = [HasStdExtV, HasStdExtF]
//===----------------------------------------------------------------------===//
// 17.4. Vector Register Gather Instructions
//===----------------------------------------------------------------------===//
defm PseudoVRGATHER : VPseudoBinaryV_VV_VX_VI<uimm5, "@earlyclobber $rd">;
defm PseudoVRGATHEREI16 : VPseudoBinaryV_VV_EEW</* eew */ 16, "@earlyclobber $rd">;
//===----------------------------------------------------------------------===//
// 17.5. Vector Compress Instruction
//===----------------------------------------------------------------------===//
defm PseudoVCOMPRESS : VPseudoUnaryV_V_AnyMask;
//===----------------------------------------------------------------------===//
// Patterns.
//===----------------------------------------------------------------------===//
let Predicates = [HasStdExtV] in {
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
//===----------------------------------------------------------------------===//
// 7. Vector Loads and Stores
//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//
// 7.4 Vector Unit-Stride Instructions
//===----------------------------------------------------------------------===//
foreach vti = AllVectors in
{
defm : VPatUSLoad<"int_riscv_vle",
"PseudoVLE" # vti.SEW,
vti.Vector, vti.Mask, vti.SEW, vti.LMul, vti.RegClass>;
defm : VPatUSLoadFF<"PseudoVLE" # vti.SEW # "FF",
vti.Vector, vti.Mask, vti.SEW, vti.LMul, vti.RegClass>;
defm : VPatUSStore<"int_riscv_vse",
"PseudoVSE" # vti.SEW,
vti.Vector, vti.Mask, vti.SEW, vti.LMul, vti.RegClass>;
}
//===----------------------------------------------------------------------===//
// 7.5 Vector Strided Instructions
//===----------------------------------------------------------------------===//
foreach vti = AllVectors in
{
defm : VPatSLoad<"int_riscv_vlse",
"PseudoVLSE" # vti.SEW,
vti.Vector, vti.Mask, vti.SEW, vti.LMul, vti.RegClass>;
defm : VPatSStore<"int_riscv_vsse",
"PseudoVSSE" # vti.SEW,
vti.Vector, vti.Mask, vti.SEW, vti.LMul, vti.RegClass>;
}
//===----------------------------------------------------------------------===//
// 7.6 Vector Indexed Instructions
//===----------------------------------------------------------------------===//
foreach vti = AllVectors in
foreach eew = EEWList in {
defvar vlmul = vti.LMul;
defvar octuple_lmul = octuple_from_str<vti.LMul.MX>.ret;
defvar log_sew = shift_amount<vti.SEW>.val;
// The data vector register group has EEW=SEW, EMUL=LMUL, while the offset
// vector register group has EEW encoding in the instruction and EMUL=(EEW/SEW)*LMUL.
// calculate octuple elmul which is (eew * octuple_lmul) >> log_sew
defvar octuple_elmul = !srl(!mul(eew, octuple_lmul), log_sew);
// legal octuple elmul should be more than 0 and less than equal 64
if !gt(octuple_elmul, 0) then {
if !le(octuple_elmul, 64) then {
defvar elmul_str = octuple_to_str<octuple_elmul>.ret;
defvar elmul =!cast<LMULInfo>("V_" # elmul_str);
defvar idx_vti = !cast<VTypeInfo>("VI" # eew # elmul_str);
defm : VPatILoad<"int_riscv_vluxei",
"PseudoVLUXEI"#eew,
vti.Vector, idx_vti.Vector, vti.Mask, vti.SEW,
vlmul, elmul, vti.RegClass, idx_vti.RegClass>;
defm : VPatILoad<"int_riscv_vloxei",
"PseudoVLOXEI"#eew,
vti.Vector, idx_vti.Vector, vti.Mask, vti.SEW,
vlmul, elmul, vti.RegClass, idx_vti.RegClass>;
defm : VPatIStore<"int_riscv_vsoxei",
"PseudoVSOXEI"#eew,
vti.Vector, idx_vti.Vector, vti.Mask, vti.SEW,
vlmul, elmul, vti.RegClass, idx_vti.RegClass>;
defm : VPatIStore<"int_riscv_vsuxei",
"PseudoVSUXEI"#eew,
vti.Vector, idx_vti.Vector, vti.Mask, vti.SEW,
vlmul, elmul, vti.RegClass, idx_vti.RegClass>;
}
}
}
} // Predicates = [HasStdExtV]
//===----------------------------------------------------------------------===//
// 8. Vector AMO Operations
//===----------------------------------------------------------------------===//
let Predicates = [HasStdExtZvamo] in {
defm "" : VPatAMOV_WD<"int_riscv_vamoswap", "PseudoVAMOSWAP", AllIntegerVectors>;
defm "" : VPatAMOV_WD<"int_riscv_vamoadd", "PseudoVAMOADD", AllIntegerVectors>;
defm "" : VPatAMOV_WD<"int_riscv_vamoxor", "PseudoVAMOXOR", AllIntegerVectors>;
defm "" : VPatAMOV_WD<"int_riscv_vamoand", "PseudoVAMOAND", AllIntegerVectors>;
defm "" : VPatAMOV_WD<"int_riscv_vamoor", "PseudoVAMOOR", AllIntegerVectors>;
defm "" : VPatAMOV_WD<"int_riscv_vamomin", "PseudoVAMOMIN", AllIntegerVectors>;
defm "" : VPatAMOV_WD<"int_riscv_vamomax", "PseudoVAMOMAX", AllIntegerVectors>;
defm "" : VPatAMOV_WD<"int_riscv_vamominu", "PseudoVAMOMINU", AllIntegerVectors>;
defm "" : VPatAMOV_WD<"int_riscv_vamomaxu", "PseudoVAMOMAXU", AllIntegerVectors>;
} // Predicates = [HasStdExtZvamo]
let Predicates = [HasStdExtZvamo, HasStdExtF] in {
defm "" : VPatAMOV_WD<"int_riscv_vamoswap", "PseudoVAMOSWAP", AllFloatVectors>;
} // Predicates = [HasStdExtZvamo, HasStdExtF]
//===----------------------------------------------------------------------===//
// 12. Vector Integer Arithmetic Instructions
//===----------------------------------------------------------------------===//
let Predicates = [HasStdExtV] in {
//===----------------------------------------------------------------------===//
// 12.1. Vector Single-Width Integer Add and Subtract
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VV_VX_VI<"int_riscv_vadd", "PseudoVADD", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vsub", "PseudoVSUB", AllIntegerVectors>;
defm "" : VPatBinaryV_VX_VI<"int_riscv_vrsub", "PseudoVRSUB", AllIntegerVectors>;
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
//===----------------------------------------------------------------------===//
// 12.2. Vector Widening Integer Add/Subtract
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryW_VV_VX<"int_riscv_vwaddu", "PseudoVWADDU", AllWidenableIntVectors>;
defm "" : VPatBinaryW_VV_VX<"int_riscv_vwsubu", "PseudoVWSUBU", AllWidenableIntVectors>;
defm "" : VPatBinaryW_VV_VX<"int_riscv_vwadd", "PseudoVWADD", AllWidenableIntVectors>;
defm "" : VPatBinaryW_VV_VX<"int_riscv_vwsub", "PseudoVWSUB", AllWidenableIntVectors>;
defm "" : VPatBinaryW_WV_WX<"int_riscv_vwaddu_w", "PseudoVWADDU", AllWidenableIntVectors>;
defm "" : VPatBinaryW_WV_WX<"int_riscv_vwsubu_w", "PseudoVWSUBU", AllWidenableIntVectors>;
defm "" : VPatBinaryW_WV_WX<"int_riscv_vwadd_w", "PseudoVWADD", AllWidenableIntVectors>;
defm "" : VPatBinaryW_WV_WX<"int_riscv_vwsub_w", "PseudoVWSUB", AllWidenableIntVectors>;
//===----------------------------------------------------------------------===//
// 12.3. Vector Integer Extension
//===----------------------------------------------------------------------===//
defm "" : VPatUnaryV_VF<"int_riscv_vzext", "PseudoVZEXT", "VF2",
AllFractionableVF2IntVectors>;
defm "" : VPatUnaryV_VF<"int_riscv_vzext", "PseudoVZEXT", "VF4",
AllFractionableVF4IntVectors>;
defm "" : VPatUnaryV_VF<"int_riscv_vzext", "PseudoVZEXT", "VF8",
AllFractionableVF8IntVectors>;
defm "" : VPatUnaryV_VF<"int_riscv_vsext", "PseudoVSEXT", "VF2",
AllFractionableVF2IntVectors>;
defm "" : VPatUnaryV_VF<"int_riscv_vsext", "PseudoVSEXT", "VF4",
AllFractionableVF4IntVectors>;
defm "" : VPatUnaryV_VF<"int_riscv_vsext", "PseudoVSEXT", "VF8",
AllFractionableVF8IntVectors>;
//===----------------------------------------------------------------------===//
// 12.4. Vector Integer Add-with-Carry / Subtract-with-Borrow Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VM_XM_IM<"int_riscv_vadc", "PseudoVADC">;
defm "" : VPatBinaryM_VM_XM_IM<"int_riscv_vmadc_carry_in", "PseudoVMADC">;
defm "" : VPatBinaryM_V_X_I<"int_riscv_vmadc", "PseudoVMADC">;
defm "" : VPatBinaryV_VM_XM<"int_riscv_vsbc", "PseudoVSBC">;
defm "" : VPatBinaryM_VM_XM<"int_riscv_vmsbc_borrow_in", "PseudoVMSBC">;
defm "" : VPatBinaryM_V_X<"int_riscv_vmsbc", "PseudoVMSBC">;
//===----------------------------------------------------------------------===//
// 12.5. Vector Bitwise Logical Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VV_VX_VI<"int_riscv_vand", "PseudoVAND", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX_VI<"int_riscv_vor", "PseudoVOR", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX_VI<"int_riscv_vxor", "PseudoVXOR", AllIntegerVectors>;
//===----------------------------------------------------------------------===//
// 12.6. Vector Single-Width Bit Shift Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VV_VX_VI<"int_riscv_vsll", "PseudoVSLL", AllIntegerVectors,
uimm5>;
defm "" : VPatBinaryV_VV_VX_VI<"int_riscv_vsrl", "PseudoVSRL", AllIntegerVectors,
uimm5>;
defm "" : VPatBinaryV_VV_VX_VI<"int_riscv_vsra", "PseudoVSRA", AllIntegerVectors,
uimm5>;
//===----------------------------------------------------------------------===//
// 12.7. Vector Narrowing Integer Right Shift Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_WV_WX_WI<"int_riscv_vnsrl", "PseudoVNSRL", AllWidenableIntVectors>;
defm "" : VPatBinaryV_WV_WX_WI<"int_riscv_vnsra", "PseudoVNSRA", AllWidenableIntVectors>;
//===----------------------------------------------------------------------===//
// 12.8. Vector Integer Comparison Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryM_VV_VX_VI<"int_riscv_vmseq", "PseudoVMSEQ", AllIntegerVectors>;
defm "" : VPatBinaryM_VV_VX_VI<"int_riscv_vmsne", "PseudoVMSNE", AllIntegerVectors>;
defm "" : VPatBinaryM_VV_VX<"int_riscv_vmsltu", "PseudoVMSLTU", AllIntegerVectors>;
defm "" : VPatBinaryM_VV_VX<"int_riscv_vmslt", "PseudoVMSLT", AllIntegerVectors>;
defm "" : VPatBinaryM_VV_VX_VI<"int_riscv_vmsleu", "PseudoVMSLEU", AllIntegerVectors>;
defm "" : VPatBinaryM_VV_VX_VI<"int_riscv_vmsle", "PseudoVMSLE", AllIntegerVectors>;
defm "" : VPatBinaryM_VX_VI<"int_riscv_vmsgtu", "PseudoVMSGTU", AllIntegerVectors>;
defm "" : VPatBinaryM_VX_VI<"int_riscv_vmsgt", "PseudoVMSGT", AllIntegerVectors>;
// Match vmslt(u).vx intrinsics to vmsle(u).vi if the scalar is -15 to 16. This
// avoids the user needing to know that there is no vmslt(u).vi instruction.
// This is limited to vmslt(u).vx as there is no vmsge().vx intrinsic or
// instruction.
foreach vti = AllIntegerVectors in {
def : Pat<(vti.Mask (int_riscv_vmslt (vti.Vector vti.RegClass:$rs1),
(vti.Scalar simm5_plus1:$rs2), GPR:$vl)),
(!cast<Instruction>("PseudoVMSLE_VI_"#vti.LMul.MX) vti.RegClass:$rs1,
(DecImm simm5_plus1:$rs2),
(NoX0 GPR:$vl),
vti.SEW)>;
def : Pat<(vti.Mask (int_riscv_vmslt_mask (vti.Mask V0),
(vti.Vector vti.RegClass:$rs1),
(vti.Scalar simm5_plus1:$rs2),
(vti.Mask VR:$merge),
GPR:$vl)),
(!cast<Instruction>("PseudoVMSLE_VI_"#vti.LMul.MX#"_MASK")
VR:$merge,
vti.RegClass:$rs1,
(DecImm simm5_plus1:$rs2),
(vti.Mask V0),
(NoX0 GPR:$vl),
vti.SEW)>;
def : Pat<(vti.Mask (int_riscv_vmsltu (vti.Vector vti.RegClass:$rs1),
(vti.Scalar simm5_plus1:$rs2), GPR:$vl)),
(!cast<Instruction>("PseudoVMSLEU_VI_"#vti.LMul.MX) vti.RegClass:$rs1,
(DecImm simm5_plus1:$rs2),
(NoX0 GPR:$vl),
vti.SEW)>;
def : Pat<(vti.Mask (int_riscv_vmsltu_mask (vti.Mask V0),
(vti.Vector vti.RegClass:$rs1),
(vti.Scalar simm5_plus1:$rs2),
(vti.Mask VR:$merge),
GPR:$vl)),
(!cast<Instruction>("PseudoVMSLEU_VI_"#vti.LMul.MX#"_MASK")
VR:$merge,
vti.RegClass:$rs1,
(DecImm simm5_plus1:$rs2),
(vti.Mask V0),
(NoX0 GPR:$vl),
vti.SEW)>;
// Special cases to avoid matching vmsltu.vi 0 (always false) to
// vmsleu.vi -1 (always true). Instead match to vmsne.vv.
def : Pat<(vti.Mask (int_riscv_vmsltu (vti.Vector vti.RegClass:$rs1),
(vti.Scalar 0), GPR:$vl)),
(!cast<Instruction>("PseudoVMSNE_VV_"#vti.LMul.MX) vti.RegClass:$rs1,
vti.RegClass:$rs1,
(NoX0 GPR:$vl),
vti.SEW)>;
def : Pat<(vti.Mask (int_riscv_vmsltu_mask (vti.Mask V0),
(vti.Vector vti.RegClass:$rs1),
(vti.Scalar 0),
(vti.Mask VR:$merge),
GPR:$vl)),
(!cast<Instruction>("PseudoVMSNE_VV_"#vti.LMul.MX#"_MASK")
VR:$merge,
vti.RegClass:$rs1,
vti.RegClass:$rs1,
(vti.Mask V0),
(NoX0 GPR:$vl),
vti.SEW)>;
}
//===----------------------------------------------------------------------===//
// 12.9. Vector Integer Min/Max Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VV_VX<"int_riscv_vminu", "PseudoVMINU", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vmin", "PseudoVMIN", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vmaxu", "PseudoVMAXU", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vmax", "PseudoVMAX", AllIntegerVectors>;
//===----------------------------------------------------------------------===//
// 12.10. Vector Single-Width Integer Multiply Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VV_VX<"int_riscv_vmul", "PseudoVMUL", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vmulh", "PseudoVMULH", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vmulhu", "PseudoVMULHU", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vmulhsu", "PseudoVMULHSU", AllIntegerVectors>;
//===----------------------------------------------------------------------===//
// 12.11. Vector Integer Divide Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VV_VX<"int_riscv_vdivu", "PseudoVDIVU", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vdiv", "PseudoVDIV", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vremu", "PseudoVREMU", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vrem", "PseudoVREM", AllIntegerVectors>;
//===----------------------------------------------------------------------===//
// 12.12. Vector Widening Integer Multiply Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryW_VV_VX<"int_riscv_vwmul", "PseudoVWMUL", AllWidenableIntVectors>;
defm "" : VPatBinaryW_VV_VX<"int_riscv_vwmulu", "PseudoVWMULU", AllWidenableIntVectors>;
defm "" : VPatBinaryW_VV_VX<"int_riscv_vwmulsu", "PseudoVWMULSU", AllWidenableIntVectors>;
//===----------------------------------------------------------------------===//
// 12.13. Vector Single-Width Integer Multiply-Add Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatTernaryV_VV_VX_AAXA<"int_riscv_vmadd", "PseudoVMADD", AllIntegerVectors>;
defm "" : VPatTernaryV_VV_VX_AAXA<"int_riscv_vnmsub", "PseudoVNMSUB", AllIntegerVectors>;
defm "" : VPatTernaryV_VV_VX_AAXA<"int_riscv_vmacc", "PseudoVMACC", AllIntegerVectors>;
defm "" : VPatTernaryV_VV_VX_AAXA<"int_riscv_vnmsac", "PseudoVNMSAC", AllIntegerVectors>;
//===----------------------------------------------------------------------===//
// 12.14. Vector Widening Integer Multiply-Add Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatTernaryW_VV_VX<"int_riscv_vwmaccu", "PseudoVWMACCU", AllWidenableIntVectors>;
defm "" : VPatTernaryW_VV_VX<"int_riscv_vwmacc", "PseudoVWMACC", AllWidenableIntVectors>;
defm "" : VPatTernaryW_VV_VX<"int_riscv_vwmaccsu", "PseudoVWMACCSU", AllWidenableIntVectors>;
defm "" : VPatTernaryW_VX<"int_riscv_vwmaccus", "PseudoVWMACCUS", AllWidenableIntVectors>;
//===----------------------------------------------------------------------===//
// 12.16. Vector Integer Merge Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VM_XM_IM<"int_riscv_vmerge", "PseudoVMERGE">;
//===----------------------------------------------------------------------===//
// 12.17. Vector Integer Move Instructions
//===----------------------------------------------------------------------===//
foreach vti = AllVectors in {
def : Pat<(vti.Vector (int_riscv_vmv_v_v (vti.Vector vti.RegClass:$rs1),
GPR:$vl)),
(!cast<Instruction>("PseudoVMV_V_V_"#vti.LMul.MX)
$rs1, (NoX0 GPR:$vl), vti.SEW)>;
}
foreach vti = AllIntegerVectors in {
def : Pat<(vti.Vector (int_riscv_vmv_v_x GPR:$rs2, GPR:$vl)),
(!cast<Instruction>("PseudoVMV_V_X_"#vti.LMul.MX)
$rs2, (NoX0 GPR:$vl), vti.SEW)>;
def : Pat<(vti.Vector (int_riscv_vmv_v_x simm5:$imm5, GPR:$vl)),
(!cast<Instruction>("PseudoVMV_V_I_"#vti.LMul.MX)
simm5:$imm5, (NoX0 GPR:$vl), vti.SEW)>;
}
//===----------------------------------------------------------------------===//
// 13.1. Vector Single-Width Saturating Add and Subtract
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VV_VX_VI<"int_riscv_vsaddu", "PseudoVSADDU", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX_VI<"int_riscv_vsadd", "PseudoVSADD", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vssubu", "PseudoVSSUBU", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vssub", "PseudoVSSUB", AllIntegerVectors>;
//===----------------------------------------------------------------------===//
// 13.2. Vector Single-Width Averaging Add and Subtract
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VV_VX<"int_riscv_vaaddu", "PseudoVAADDU", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vaadd", "PseudoVAADD", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vasubu", "PseudoVASUBU", AllIntegerVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vasub", "PseudoVASUB", AllIntegerVectors>;
//===----------------------------------------------------------------------===//
// 13.3. Vector Single-Width Fractional Multiply with Rounding and Saturation
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VV_VX<"int_riscv_vsmul", "PseudoVSMUL", AllIntegerVectors>;
//===----------------------------------------------------------------------===//
// 13.4. Vector Single-Width Scaling Shift Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VV_VX_VI<"int_riscv_vssrl", "PseudoVSSRL", AllIntegerVectors,
uimm5>;
defm "" : VPatBinaryV_VV_VX_VI<"int_riscv_vssra", "PseudoVSSRA", AllIntegerVectors,
uimm5>;
//===----------------------------------------------------------------------===//
// 13.5. Vector Narrowing Fixed-Point Clip Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_WV_WX_WI<"int_riscv_vnclipu", "PseudoVNCLIPU", AllWidenableIntVectors>;
defm "" : VPatBinaryV_WV_WX_WI<"int_riscv_vnclip", "PseudoVNCLIP", AllWidenableIntVectors>;
[RISCV] Initial infrastructure for code generation of the RISC-V V-extension The companion RFC (http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html) gives lots of details on the overall strategy, but we summarize it here: LLVM IR involving vector types is going to be selected using pseudo instructions (only MachineInstr). These pseudo instructions contain dummy operands to represent the vector type being operated and the vector length for the operation. These two dummy operands, as set by instruction selection, will be used by the custom inserter to prepend every operation with an appropriate vsetvli instruction that ensures the vector architecture is properly configured for the operation. Not in this patch: later passes will remove the redundant vsetvli instructions. Register classes of tuples of vector registers are used to represent vector register groups (LMUL > 1). Those pseudos are eventually lowered into the actual instructions when emitting the MCInsts. About the patch: Because there is a bit of initial infrastructure required, this is the minimal patch that allows us to select instructions for 3 LLVM IR instructions: load, add and store vectors of integers. LLVM IR operations have "whole-vector" semantics (as in they generate values for all the elements). Later patches will extend the information represented in TableGen. Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com> Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com> Co-Authored-by: Craig Topper <craig.topper@sifive.com> Differential Revision: https://reviews.llvm.org/D89449
2020-12-01 11:48:24 +08:00
} // Predicates = [HasStdExtV]
let Predicates = [HasStdExtV, HasStdExtF] in {
//===----------------------------------------------------------------------===//
// 14.2. Vector Single-Width Floating-Point Add/Subtract Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VV_VX<"int_riscv_vfadd", "PseudoVFADD", AllFloatVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vfsub", "PseudoVFSUB", AllFloatVectors>;
defm "" : VPatBinaryV_VX<"int_riscv_vfrsub", "PseudoVFRSUB", AllFloatVectors>;
//===----------------------------------------------------------------------===//
// 14.3. Vector Widening Floating-Point Add/Subtract Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryW_VV_VX<"int_riscv_vfwadd", "PseudoVFWADD", AllWidenableFloatVectors>;
defm "" : VPatBinaryW_VV_VX<"int_riscv_vfwsub", "PseudoVFWSUB", AllWidenableFloatVectors>;
defm "" : VPatBinaryW_WV_WX<"int_riscv_vfwadd_w", "PseudoVFWADD", AllWidenableFloatVectors>;
defm "" : VPatBinaryW_WV_WX<"int_riscv_vfwsub_w", "PseudoVFWSUB", AllWidenableFloatVectors>;
//===----------------------------------------------------------------------===//
// 14.4. Vector Single-Width Floating-Point Multiply/Divide Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VV_VX<"int_riscv_vfmul", "PseudoVFMUL", AllFloatVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vfdiv", "PseudoVFDIV", AllFloatVectors>;
defm "" : VPatBinaryV_VX<"int_riscv_vfrdiv", "PseudoVFRDIV", AllFloatVectors>;
//===----------------------------------------------------------------------===//
// 14.5. Vector Widening Floating-Point Multiply
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryW_VV_VX<"int_riscv_vfwmul", "PseudoVFWMUL", AllWidenableFloatVectors>;
//===----------------------------------------------------------------------===//
// 14.6. Vector Single-Width Floating-Point Fused Multiply-Add Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatTernaryV_VV_VX_AAXA<"int_riscv_vfmacc", "PseudoVFMACC", AllFloatVectors>;
defm "" : VPatTernaryV_VV_VX_AAXA<"int_riscv_vfnmacc", "PseudoVFNMACC", AllFloatVectors>;
defm "" : VPatTernaryV_VV_VX_AAXA<"int_riscv_vfmsac", "PseudoVFMSAC", AllFloatVectors>;
defm "" : VPatTernaryV_VV_VX_AAXA<"int_riscv_vfnmsac", "PseudoVFNMSAC", AllFloatVectors>;
defm "" : VPatTernaryV_VV_VX_AAXA<"int_riscv_vfmadd", "PseudoVFMADD", AllFloatVectors>;
defm "" : VPatTernaryV_VV_VX_AAXA<"int_riscv_vfnmadd", "PseudoVFNMADD", AllFloatVectors>;
defm "" : VPatTernaryV_VV_VX_AAXA<"int_riscv_vfmsub", "PseudoVFMSUB", AllFloatVectors>;
defm "" : VPatTernaryV_VV_VX_AAXA<"int_riscv_vfnmsub", "PseudoVFNMSUB", AllFloatVectors>;
//===----------------------------------------------------------------------===//
// 14.7. Vector Widening Floating-Point Fused Multiply-Add Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatTernaryW_VV_VX<"int_riscv_vfwmacc", "PseudoVFWMACC", AllWidenableFloatVectors>;
defm "" : VPatTernaryW_VV_VX<"int_riscv_vfwnmacc", "PseudoVFWNMACC", AllWidenableFloatVectors>;
defm "" : VPatTernaryW_VV_VX<"int_riscv_vfwmsac", "PseudoVFWMSAC", AllWidenableFloatVectors>;
defm "" : VPatTernaryW_VV_VX<"int_riscv_vfwnmsac", "PseudoVFWNMSAC", AllWidenableFloatVectors>;
//===----------------------------------------------------------------------===//
// 14.8. Vector Floating-Point Square-Root Instruction
//===----------------------------------------------------------------------===//
defm "" : VPatUnaryV_V<"int_riscv_vfsqrt", "PseudoVFSQRT", AllFloatVectors>;
//===----------------------------------------------------------------------===//
// 14.9. Vector Floating-Point Reciprocal Square-Root Estimate Instruction
//===----------------------------------------------------------------------===//
defm "" : VPatUnaryV_V<"int_riscv_vfrsqrte7", "PseudoVFRSQRTE7", AllFloatVectors>;
//===----------------------------------------------------------------------===//
// 14.10. Vector Floating-Point Reciprocal Estimate Instruction
//===----------------------------------------------------------------------===//
defm "" : VPatUnaryV_V<"int_riscv_vfrece7", "PseudoVFRECE7", AllFloatVectors>;
//===----------------------------------------------------------------------===//
// 14.11. Vector Floating-Point Min/Max Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VV_VX<"int_riscv_vfmin", "PseudoVFMIN", AllFloatVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vfmax", "PseudoVFMAX", AllFloatVectors>;
//===----------------------------------------------------------------------===//
// 14.12. Vector Floating-Point Sign-Injection Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryV_VV_VX<"int_riscv_vfsgnj", "PseudoVFSGNJ", AllFloatVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vfsgnjn", "PseudoVFSGNJN", AllFloatVectors>;
defm "" : VPatBinaryV_VV_VX<"int_riscv_vfsgnjx", "PseudoVFSGNJX", AllFloatVectors>;
//===----------------------------------------------------------------------===//
// 14.13. Vector Floating-Point Compare Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryM_VV_VX<"int_riscv_vmfeq", "PseudoVMFEQ", AllFloatVectors>;
defm "" : VPatBinaryM_VV_VX<"int_riscv_vmfle", "PseudoVMFLE", AllFloatVectors>;
defm "" : VPatBinaryM_VV_VX<"int_riscv_vmflt", "PseudoVMFLT", AllFloatVectors>;
defm "" : VPatBinaryM_VV_VX<"int_riscv_vmfne", "PseudoVMFNE", AllFloatVectors>;
defm "" : VPatBinaryM_VX<"int_riscv_vmfgt", "PseudoVMFGT", AllFloatVectors>;
defm "" : VPatBinaryM_VX<"int_riscv_vmfge", "PseudoVMFGE", AllFloatVectors>;
//===----------------------------------------------------------------------===//
// 14.14. Vector Floating-Point Classify Instruction
//===----------------------------------------------------------------------===//
defm "" : VPatConversionVI_VF<"int_riscv_vfclass", "PseudoVFCLASS">;
//===----------------------------------------------------------------------===//
// 14.15. Vector Floating-Point Merge Instruction
//===----------------------------------------------------------------------===//
// We can use vmerge.vvm to support vector-vector vfmerge.
defm "" : VPatBinaryV_VM<"int_riscv_vfmerge", "PseudoVMERGE",
/*CarryOut = */0, /*vtilist=*/AllFloatVectors>;
defm "" : VPatBinaryV_XM<"int_riscv_vfmerge", "PseudoVFMERGE",
/*CarryOut = */0, /*vtilist=*/AllFloatVectors>;
foreach fvti = AllFloatVectors in {
defvar instr = !cast<Instruction>("PseudoVMERGE_VIM_"#fvti.LMul.MX);
def : Pat<(fvti.Vector (int_riscv_vfmerge (fvti.Vector fvti.RegClass:$rs2),
(fvti.Scalar (fpimm0)),
(fvti.Mask V0), (XLenVT GPR:$vl))),
(instr fvti.RegClass:$rs2, 0, (fvti.Mask V0), (NoX0 GPR:$vl), fvti.SEW)>;
}
//===----------------------------------------------------------------------===//
// 14.16. Vector Floating-Point Move Instruction
//===----------------------------------------------------------------------===//
foreach fvti = AllFloatVectors in {
// If we're splatting fpimm0, use vmv.v.x vd, x0.
def : Pat<(fvti.Vector (int_riscv_vfmv_v_f
(fvti.Scalar (fpimm0)), GPR:$vl)),
(!cast<Instruction>("PseudoVMV_V_I_"#fvti.LMul.MX)
0, (NoX0 GPR:$vl), fvti.SEW)>;
def : Pat<(fvti.Vector (int_riscv_vfmv_v_f
(fvti.Scalar fvti.ScalarRegClass:$rs2), GPR:$vl)),
(!cast<Instruction>("PseudoVFMV_V_F_" #
!cond(!eq(fvti.Scalar, f16): "F16_",
!eq(fvti.Scalar, f32): "F32_",
!eq(fvti.Scalar, f64): "F64_") #
fvti.LMul.MX)
(fvti.Scalar fvti.ScalarRegClass:$rs2),
(NoX0 GPR:$vl), fvti.SEW)>;
}
//===----------------------------------------------------------------------===//
// 14.17. Single-Width Floating-Point/Integer Type-Convert Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatConversionVI_VF<"int_riscv_vfcvt_xu_f_v", "PseudoVFCVT_XU_F">;
defm "" : VPatConversionVI_VF<"int_riscv_vfcvt_rtz_xu_f_v", "PseudoVFCVT_RTZ_XU_F">;
defm "" : VPatConversionVI_VF<"int_riscv_vfcvt_x_f_v", "PseudoVFCVT_X_F">;
defm "" : VPatConversionVI_VF<"int_riscv_vfcvt_rtz_x_f_v", "PseudoVFCVT_RTZ_X_F">;
defm "" : VPatConversionVF_VI<"int_riscv_vfcvt_f_x_v", "PseudoVFCVT_F_X">;
defm "" : VPatConversionVF_VI<"int_riscv_vfcvt_f_xu_v", "PseudoVFCVT_F_XU">;
//===----------------------------------------------------------------------===//
// 14.18. Widening Floating-Point/Integer Type-Convert Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatConversionWI_VF<"int_riscv_vfwcvt_xu_f_v", "PseudoVFWCVT_XU_F">;
defm "" : VPatConversionWI_VF<"int_riscv_vfwcvt_x_f_v", "PseudoVFWCVT_X_F">;
defm "" : VPatConversionWI_VF<"int_riscv_vfwcvt_rtz_xu_f_v", "PseudoVFWCVT_RTZ_XU_F">;
defm "" : VPatConversionWI_VF<"int_riscv_vfwcvt_rtz_x_f_v", "PseudoVFWCVT_RTZ_X_F">;
defm "" : VPatConversionWF_VI<"int_riscv_vfwcvt_f_xu_v", "PseudoVFWCVT_F_XU">;
defm "" : VPatConversionWF_VI<"int_riscv_vfwcvt_f_x_v", "PseudoVFWCVT_F_X">;
defm "" : VPatConversionWF_VF<"int_riscv_vfwcvt_f_f_v", "PseudoVFWCVT_F_F">;
//===----------------------------------------------------------------------===//
// 14.19. Narrowing Floating-Point/Integer Type-Convert Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatConversionVI_WF<"int_riscv_vfncvt_xu_f_w", "PseudoVFNCVT_XU_F">;
defm "" : VPatConversionVI_WF<"int_riscv_vfncvt_x_f_w", "PseudoVFNCVT_X_F">;
defm "" : VPatConversionVI_WF<"int_riscv_vfncvt_rtz_xu_f_w", "PseudoVFNCVT_RTZ_XU_F">;
defm "" : VPatConversionVI_WF<"int_riscv_vfncvt_rtz_x_f_w", "PseudoVFNCVT_RTZ_X_F">;
defm "" : VPatConversionVF_WI <"int_riscv_vfncvt_f_xu_w", "PseudoVFNCVT_F_XU">;
defm "" : VPatConversionVF_WI <"int_riscv_vfncvt_f_x_w", "PseudoVFNCVT_F_X">;
defm "" : VPatConversionVF_WF<"int_riscv_vfncvt_f_f_w", "PseudoVFNCVT_F_F">;
defm "" : VPatConversionVF_WF<"int_riscv_vfncvt_rod_f_f_w", "PseudoVFNCVT_ROD_F_F">;
} // Predicates = [HasStdExtV, HasStdExtF]
let Predicates = [HasStdExtV] in {
//===----------------------------------------------------------------------===//
// 15.1. Vector Single-Width Integer Reduction Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatReductionV_VS<"int_riscv_vredsum", "PseudoVREDSUM">;
defm "" : VPatReductionV_VS<"int_riscv_vredand", "PseudoVREDAND">;
defm "" : VPatReductionV_VS<"int_riscv_vredor", "PseudoVREDOR">;
defm "" : VPatReductionV_VS<"int_riscv_vredxor", "PseudoVREDXOR">;
defm "" : VPatReductionV_VS<"int_riscv_vredminu", "PseudoVREDMINU">;
defm "" : VPatReductionV_VS<"int_riscv_vredmin", "PseudoVREDMIN">;
defm "" : VPatReductionV_VS<"int_riscv_vredmaxu", "PseudoVREDMAXU">;
defm "" : VPatReductionV_VS<"int_riscv_vredmax", "PseudoVREDMAX">;
//===----------------------------------------------------------------------===//
// 15.2. Vector Widening Integer Reduction Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatReductionW_VS<"int_riscv_vwredsumu", "PseudoVWREDSUMU">;
defm "" : VPatReductionW_VS<"int_riscv_vwredsum", "PseudoVWREDSUM">;
} // Predicates = [HasStdExtV]
let Predicates = [HasStdExtV, HasStdExtF] in {
//===----------------------------------------------------------------------===//
// 15.3. Vector Single-Width Floating-Point Reduction Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatReductionV_VS<"int_riscv_vfredosum", "PseudoVFREDOSUM", /*IsFloat=*/1>;
defm "" : VPatReductionV_VS<"int_riscv_vfredsum", "PseudoVFREDSUM", /*IsFloat=*/1>;
defm "" : VPatReductionV_VS<"int_riscv_vfredmin", "PseudoVFREDMIN", /*IsFloat=*/1>;
defm "" : VPatReductionV_VS<"int_riscv_vfredmax", "PseudoVFREDMAX", /*IsFloat=*/1>;
//===----------------------------------------------------------------------===//
// 15.4. Vector Widening Floating-Point Reduction Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatReductionW_VS<"int_riscv_vfwredsum", "PseudoVFWREDSUM", /*IsFloat=*/1>;
defm "" : VPatReductionW_VS<"int_riscv_vfwredosum", "PseudoVFWREDOSUM", /*IsFloat=*/1>;
} // Predicates = [HasStdExtV, HasStdExtF]
//===----------------------------------------------------------------------===//
// 16. Vector Mask Instructions
//===----------------------------------------------------------------------===//
let Predicates = [HasStdExtV] in {
//===----------------------------------------------------------------------===//
// 16.1 Vector Mask-Register Logical Instructions
//===----------------------------------------------------------------------===//
defm "" : VPatBinaryM_MM<"int_riscv_vmand", "PseudoVMAND">;
defm "" : VPatBinaryM_MM<"int_riscv_vmnand", "PseudoVMNAND">;
defm "" : VPatBinaryM_MM<"int_riscv_vmandnot", "PseudoVMANDNOT">;
defm "" : VPatBinaryM_MM<"int_riscv_vmxor", "PseudoVMXOR">;
defm "" : VPatBinaryM_MM<"int_riscv_vmor", "PseudoVMOR">;
defm "" : VPatBinaryM_MM<"int_riscv_vmnor", "PseudoVMNOR">;
defm "" : VPatBinaryM_MM<"int_riscv_vmornot", "PseudoVMORNOT">;
defm "" : VPatBinaryM_MM<"int_riscv_vmxnor", "PseudoVMXNOR">;
// pseudo instructions
defm "" : VPatNullaryM<"int_riscv_vmclr", "PseudoVMCLR">;
defm "" : VPatNullaryM<"int_riscv_vmset", "PseudoVMSET">;
//===----------------------------------------------------------------------===//
// 16.2. Vector mask population count vpopc
//===----------------------------------------------------------------------===//
defm "" : VPatUnaryS_M<"int_riscv_vpopc", "PseudoVPOPC">;
//===----------------------------------------------------------------------===//
// 16.3. vfirst find-first-set mask bit
//===----------------------------------------------------------------------===//
defm "" : VPatUnaryS_M<"int_riscv_vfirst", "PseudoVFIRST">;
//===----------------------------------------------------------------------===//
// 16.4. vmsbf.m set-before-first mask bit
//===----------------------------------------------------------------------===//
defm "" : VPatUnaryM_M<"int_riscv_vmsbf", "PseudoVMSBF">;
//===----------------------------------------------------------------------===//
// 16.5. vmsif.m set-including-first mask bit
//===----------------------------------------------------------------------===//
defm "" : VPatUnaryM_M<"int_riscv_vmsif", "PseudoVMSIF">;
//===----------------------------------------------------------------------===//
// 16.6. vmsof.m set-only-first mask bit
//===----------------------------------------------------------------------===//
defm "" : VPatUnaryM_M<"int_riscv_vmsof", "PseudoVMSOF">;
//===----------------------------------------------------------------------===//
// 16.8. Vector Iota Instruction
//===----------------------------------------------------------------------===//
defm "" : VPatUnaryV_M<"int_riscv_viota", "PseudoVIOTA">;
//===----------------------------------------------------------------------===//
// 16.9. Vector Element Index Instruction
//===----------------------------------------------------------------------===//
defm "" : VPatNullaryV<"int_riscv_vid", "PseudoVID">;
} // Predicates = [HasStdExtV]
//===----------------------------------------------------------------------===//
// 17. Vector Permutation Instructions
//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//
// 17.1. Integer Scalar Move Instructions
//===----------------------------------------------------------------------===//
let Predicates = [HasStdExtV] in {
foreach vti = AllIntegerVectors in {
def : Pat<(riscv_vmv_x_s (vti.Vector vti.RegClass:$rs2)),
(!cast<Instruction>("PseudoVMV_X_S_" # vti.LMul.MX) $rs2, vti.SEW)>;
def : Pat<(vti.Vector (int_riscv_vmv_s_x (vti.Vector vti.RegClass:$rs1),
GPR:$rs2, GPR:$vl)),
(!cast<Instruction>("PseudoVMV_S_X_" # vti.LMul.MX)
(vti.Vector $rs1), $rs2, (NoX0 GPR:$vl), vti.SEW)>;
}
} // Predicates = [HasStdExtV]
//===----------------------------------------------------------------------===//
// 17.2. Floating-Point Scalar Move Instructions
//===----------------------------------------------------------------------===//
let Predicates = [HasStdExtV, HasStdExtF] in {
foreach fvti = AllFloatVectors in {
defvar instr = !cast<Instruction>("PseudoVFMV_F_S_" #
!cond(!eq(fvti.Scalar, f16): "F16_",
!eq(fvti.Scalar, f32): "F32_",
!eq(fvti.Scalar, f64): "F64_") #
fvti.LMul.MX);
def : Pat<(fvti.Scalar (int_riscv_vfmv_f_s (fvti.Vector fvti.RegClass:$rs2))),
(instr $rs2, fvti.SEW)>;
def : Pat<(fvti.Vector (int_riscv_vfmv_s_f (fvti.Vector fvti.RegClass:$rs1),
(fvti.Scalar fvti.ScalarRegClass:$rs2), GPR:$vl)),
(!cast<Instruction>("PseudoVFMV_S_F_" #
!cond(!eq(fvti.Scalar, f16): "F16_",
!eq(fvti.Scalar, f32): "F32_",
!eq(fvti.Scalar, f64): "F64_") #
fvti.LMul.MX)
(fvti.Vector $rs1),
(fvti.Scalar fvti.ScalarRegClass:$rs2),
(NoX0 GPR:$vl), fvti.SEW)>;
}
} // Predicates = [HasStdExtV, HasStdExtF]
//===----------------------------------------------------------------------===//
// 17.3. Vector Slide Instructions
//===----------------------------------------------------------------------===//
let Predicates = [HasStdExtV] in {
defm "" : VPatTernaryV_VX_VI<"int_riscv_vslideup", "PseudoVSLIDEUP", AllIntegerVectors, uimm5>;
defm "" : VPatTernaryV_VX_VI<"int_riscv_vslidedown", "PseudoVSLIDEDOWN", AllIntegerVectors, uimm5>;
defm "" : VPatBinaryV_VX<"int_riscv_vslide1up", "PseudoVSLIDE1UP", AllIntegerVectors>;
defm "" : VPatBinaryV_VX<"int_riscv_vslide1down", "PseudoVSLIDE1DOWN", AllIntegerVectors>;
} // Predicates = [HasStdExtV]
let Predicates = [HasStdExtV, HasStdExtF] in {
defm "" : VPatTernaryV_VX_VI<"int_riscv_vslideup", "PseudoVSLIDEUP", AllFloatVectors, uimm5>;
defm "" : VPatTernaryV_VX_VI<"int_riscv_vslidedown", "PseudoVSLIDEDOWN", AllFloatVectors, uimm5>;
defm "" : VPatBinaryV_VX<"int_riscv_vfslide1up", "PseudoVFSLIDE1UP", AllFloatVectors>;
defm "" : VPatBinaryV_VX<"int_riscv_vfslide1down", "PseudoVFSLIDE1DOWN", AllFloatVectors>;
} // Predicates = [HasStdExtV, HasStdExtF]
//===----------------------------------------------------------------------===//
// 17.4. Vector Register Gather Instructions
//===----------------------------------------------------------------------===//
let Predicates = [HasStdExtV] in {
defm "" : VPatBinaryV_VV_VX_VI_INT<"int_riscv_vrgather", "PseudoVRGATHER",
AllIntegerVectors, uimm5>;
defm "" : VPatBinaryV_VV_INT_EEW<"int_riscv_vrgatherei16", "PseudoVRGATHEREI16",
/* eew */ 16, AllIntegerVectors>;
} // Predicates = [HasStdExtV]
let Predicates = [HasStdExtV, HasStdExtF] in {
defm "" : VPatBinaryV_VV_VX_VI_INT<"int_riscv_vrgather", "PseudoVRGATHER",
AllFloatVectors, uimm5>;
defm "" : VPatBinaryV_VV_INT_EEW<"int_riscv_vrgatherei16", "PseudoVRGATHEREI16",
/* eew */ 16, AllFloatVectors>;
} // Predicates = [HasStdExtV, HasStdExtF]
//===----------------------------------------------------------------------===//
// 17.5. Vector Compress Instruction
//===----------------------------------------------------------------------===//
let Predicates = [HasStdExtV] in {
defm "" : VPatUnaryV_V_AnyMask<"int_riscv_vcompress", "PseudoVCOMPRESS", AllIntegerVectors>;
} // Predicates = [HasStdExtV]
let Predicates = [HasStdExtV, HasStdExtF] in {
defm "" : VPatUnaryV_V_AnyMask<"int_riscv_vcompress", "PseudoVCOMPRESS", AllFloatVectors>;
} // Predicates = [HasStdExtV, HasStdExtF]
// Include the non-intrinsic ISel patterns
include "RISCVInstrInfoVSDPatterns.td"