2017-03-22 00:24:12 +08:00
|
|
|
; RUN: llc -march=amdgcn -mcpu=verde -verify-machineinstrs < %s | FileCheck %s
|
|
|
|
; RUN: llc -march=amdgcn -mcpu=tonga -verify-machineinstrs < %s | FileCheck %s
|
AMDGPU: add execfix flag to SI_ELSE
Summary:
SI_ELSE is lowered into two parts:
s_or_saveexec_b64 dst, src (at the start of the basic block)
s_xor_b64 exec, exec, dst (at the end of the basic block)
The idea is that dst contains the exec mask of the preceding IF block. It can
happen that SIWholeQuadMode decides to switch from WQM to Exact mode inside
the basic block that contains SI_ELSE, in which case it introduces an instruction
s_and_b64 exec, exec, s[...]
which masks out bits that can correspond to both the IF and the ELSE paths.
So the resulting sequence must be:
s_or_savexec_b64 dst, src
s_and_b64 exec, exec, s[...] <-- added by SIWholeQuadMode
s_and_b64 dst, dst, exec <-- added by SILowerControlFlow
s_xor_b64 exec, exec, dst
Whether to add the additional s_and_b64 dst, dst, exec is currently determined
via the ExecModified tracking. With this change, it is instead determined by
an additional flag on SI_ELSE which is set by SIWholeQuadMode.
Finally: It also occured to me that an alternative approach for the long run
is for SILowerControlFlow to unconditionally emit
s_or_saveexec_b64 dst, src
...
s_and_b64 dst, dst, exec
s_xor_b64 exec, exec, dst
and have a pass that detects and cleans up the "redundant AND with exec"
pattern where possible. This could be useful anyway, because we also add
instructions
s_and_b64 vcc, exec, vcc
before s_cbranch_scc (in moveToALU), and those are often redundant. I have
some pending changes to how KILL is lowered that could also benefit from
such a cleanup pass.
In any case, this current patch could help in the short term with the whole
ExecModified business.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D22846
llvm-svn: 276972
2016-07-28 19:39:24 +08:00
|
|
|
|
|
|
|
; CHECK-LABEL: {{^}}else_no_execfix:
|
|
|
|
; CHECK: ; %Flow
|
|
|
|
; CHECK-NEXT: s_or_saveexec_b64 [[DST:s\[[0-9]+:[0-9]+\]]],
|
|
|
|
; CHECK-NEXT: s_xor_b64 exec, exec, [[DST]]
|
|
|
|
; CHECK-NEXT: ; mask branch
|
2017-03-22 00:24:12 +08:00
|
|
|
define amdgpu_ps float @else_no_execfix(i32 %z, float %v) #0 {
|
AMDGPU: add execfix flag to SI_ELSE
Summary:
SI_ELSE is lowered into two parts:
s_or_saveexec_b64 dst, src (at the start of the basic block)
s_xor_b64 exec, exec, dst (at the end of the basic block)
The idea is that dst contains the exec mask of the preceding IF block. It can
happen that SIWholeQuadMode decides to switch from WQM to Exact mode inside
the basic block that contains SI_ELSE, in which case it introduces an instruction
s_and_b64 exec, exec, s[...]
which masks out bits that can correspond to both the IF and the ELSE paths.
So the resulting sequence must be:
s_or_savexec_b64 dst, src
s_and_b64 exec, exec, s[...] <-- added by SIWholeQuadMode
s_and_b64 dst, dst, exec <-- added by SILowerControlFlow
s_xor_b64 exec, exec, dst
Whether to add the additional s_and_b64 dst, dst, exec is currently determined
via the ExecModified tracking. With this change, it is instead determined by
an additional flag on SI_ELSE which is set by SIWholeQuadMode.
Finally: It also occured to me that an alternative approach for the long run
is for SILowerControlFlow to unconditionally emit
s_or_saveexec_b64 dst, src
...
s_and_b64 dst, dst, exec
s_xor_b64 exec, exec, dst
and have a pass that detects and cleans up the "redundant AND with exec"
pattern where possible. This could be useful anyway, because we also add
instructions
s_and_b64 vcc, exec, vcc
before s_cbranch_scc (in moveToALU), and those are often redundant. I have
some pending changes to how KILL is lowered that could also benefit from
such a cleanup pass.
In any case, this current patch could help in the short term with the whole
ExecModified business.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D22846
llvm-svn: 276972
2016-07-28 19:39:24 +08:00
|
|
|
main_body:
|
|
|
|
%cc = icmp sgt i32 %z, 5
|
|
|
|
br i1 %cc, label %if, label %else
|
|
|
|
|
|
|
|
if:
|
|
|
|
%v.if = fmul float %v, 2.0
|
|
|
|
br label %end
|
|
|
|
|
|
|
|
else:
|
|
|
|
%v.else = fmul float %v, 3.0
|
|
|
|
br label %end
|
|
|
|
|
|
|
|
end:
|
|
|
|
%r = phi float [ %v.if, %if ], [ %v.else, %else ]
|
|
|
|
ret float %r
|
|
|
|
}
|
|
|
|
|
|
|
|
; CHECK-LABEL: {{^}}else_execfix_leave_wqm:
|
2017-12-05 01:18:51 +08:00
|
|
|
; CHECK: ; %bb.0:
|
2016-08-23 03:33:16 +08:00
|
|
|
; CHECK-NEXT: s_mov_b64 [[INIT_EXEC:s\[[0-9]+:[0-9]+\]]], exec
|
AMDGPU: add execfix flag to SI_ELSE
Summary:
SI_ELSE is lowered into two parts:
s_or_saveexec_b64 dst, src (at the start of the basic block)
s_xor_b64 exec, exec, dst (at the end of the basic block)
The idea is that dst contains the exec mask of the preceding IF block. It can
happen that SIWholeQuadMode decides to switch from WQM to Exact mode inside
the basic block that contains SI_ELSE, in which case it introduces an instruction
s_and_b64 exec, exec, s[...]
which masks out bits that can correspond to both the IF and the ELSE paths.
So the resulting sequence must be:
s_or_savexec_b64 dst, src
s_and_b64 exec, exec, s[...] <-- added by SIWholeQuadMode
s_and_b64 dst, dst, exec <-- added by SILowerControlFlow
s_xor_b64 exec, exec, dst
Whether to add the additional s_and_b64 dst, dst, exec is currently determined
via the ExecModified tracking. With this change, it is instead determined by
an additional flag on SI_ELSE which is set by SIWholeQuadMode.
Finally: It also occured to me that an alternative approach for the long run
is for SILowerControlFlow to unconditionally emit
s_or_saveexec_b64 dst, src
...
s_and_b64 dst, dst, exec
s_xor_b64 exec, exec, dst
and have a pass that detects and cleans up the "redundant AND with exec"
pattern where possible. This could be useful anyway, because we also add
instructions
s_and_b64 vcc, exec, vcc
before s_cbranch_scc (in moveToALU), and those are often redundant. I have
some pending changes to how KILL is lowered that could also benefit from
such a cleanup pass.
In any case, this current patch could help in the short term with the whole
ExecModified business.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D22846
llvm-svn: 276972
2016-07-28 19:39:24 +08:00
|
|
|
; CHECK: ; %Flow
|
|
|
|
; CHECK-NEXT: s_or_saveexec_b64 [[DST:s\[[0-9]+:[0-9]+\]]],
|
2016-08-23 03:33:16 +08:00
|
|
|
; CHECK-NEXT: s_and_b64 exec, exec, [[INIT_EXEC]]
|
|
|
|
; CHECK-NEXT: s_and_b64 [[AND_INIT:s\[[0-9]+:[0-9]+\]]], exec, [[DST]]
|
|
|
|
; CHECK-NEXT: s_xor_b64 exec, exec, [[AND_INIT]]
|
AMDGPU: add execfix flag to SI_ELSE
Summary:
SI_ELSE is lowered into two parts:
s_or_saveexec_b64 dst, src (at the start of the basic block)
s_xor_b64 exec, exec, dst (at the end of the basic block)
The idea is that dst contains the exec mask of the preceding IF block. It can
happen that SIWholeQuadMode decides to switch from WQM to Exact mode inside
the basic block that contains SI_ELSE, in which case it introduces an instruction
s_and_b64 exec, exec, s[...]
which masks out bits that can correspond to both the IF and the ELSE paths.
So the resulting sequence must be:
s_or_savexec_b64 dst, src
s_and_b64 exec, exec, s[...] <-- added by SIWholeQuadMode
s_and_b64 dst, dst, exec <-- added by SILowerControlFlow
s_xor_b64 exec, exec, dst
Whether to add the additional s_and_b64 dst, dst, exec is currently determined
via the ExecModified tracking. With this change, it is instead determined by
an additional flag on SI_ELSE which is set by SIWholeQuadMode.
Finally: It also occured to me that an alternative approach for the long run
is for SILowerControlFlow to unconditionally emit
s_or_saveexec_b64 dst, src
...
s_and_b64 dst, dst, exec
s_xor_b64 exec, exec, dst
and have a pass that detects and cleans up the "redundant AND with exec"
pattern where possible. This could be useful anyway, because we also add
instructions
s_and_b64 vcc, exec, vcc
before s_cbranch_scc (in moveToALU), and those are often redundant. I have
some pending changes to how KILL is lowered that could also benefit from
such a cleanup pass.
In any case, this current patch could help in the short term with the whole
ExecModified business.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D22846
llvm-svn: 276972
2016-07-28 19:39:24 +08:00
|
|
|
; CHECK-NEXT: ; mask branch
|
2017-03-22 00:24:12 +08:00
|
|
|
define amdgpu_ps void @else_execfix_leave_wqm(i32 %z, float %v) #0 {
|
AMDGPU: add execfix flag to SI_ELSE
Summary:
SI_ELSE is lowered into two parts:
s_or_saveexec_b64 dst, src (at the start of the basic block)
s_xor_b64 exec, exec, dst (at the end of the basic block)
The idea is that dst contains the exec mask of the preceding IF block. It can
happen that SIWholeQuadMode decides to switch from WQM to Exact mode inside
the basic block that contains SI_ELSE, in which case it introduces an instruction
s_and_b64 exec, exec, s[...]
which masks out bits that can correspond to both the IF and the ELSE paths.
So the resulting sequence must be:
s_or_savexec_b64 dst, src
s_and_b64 exec, exec, s[...] <-- added by SIWholeQuadMode
s_and_b64 dst, dst, exec <-- added by SILowerControlFlow
s_xor_b64 exec, exec, dst
Whether to add the additional s_and_b64 dst, dst, exec is currently determined
via the ExecModified tracking. With this change, it is instead determined by
an additional flag on SI_ELSE which is set by SIWholeQuadMode.
Finally: It also occured to me that an alternative approach for the long run
is for SILowerControlFlow to unconditionally emit
s_or_saveexec_b64 dst, src
...
s_and_b64 dst, dst, exec
s_xor_b64 exec, exec, dst
and have a pass that detects and cleans up the "redundant AND with exec"
pattern where possible. This could be useful anyway, because we also add
instructions
s_and_b64 vcc, exec, vcc
before s_cbranch_scc (in moveToALU), and those are often redundant. I have
some pending changes to how KILL is lowered that could also benefit from
such a cleanup pass.
In any case, this current patch could help in the short term with the whole
ExecModified business.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D22846
llvm-svn: 276972
2016-07-28 19:39:24 +08:00
|
|
|
main_body:
|
|
|
|
%cc = icmp sgt i32 %z, 5
|
|
|
|
br i1 %cc, label %if, label %else
|
|
|
|
|
|
|
|
if:
|
|
|
|
%v.if = fmul float %v, 2.0
|
|
|
|
br label %end
|
|
|
|
|
|
|
|
else:
|
|
|
|
%c = fmul float %v, 3.0
|
AMDGPU: Convert test cases to the dimension-aware intrinsics
Summary:
Also explicitly port over some tests in llvm.amdgcn.image.* that were
missing. Some tests are removed because they no longer apply (i.e.
explicitly testing building an address vector via insertelement).
This is in preparation for the eventual removal of the old-style
intrinsics.
Some additional notes:
- constant-address-space-32bit.ll: change some GCN-NEXT to GCN because
the instruction schedule was subtly altered
- insert_vector_elt.ll: the old test didn't actually test anything,
because %tmp1 was not used; remove the load, because it doesn't work
(Because of the amdgpu_ps calling convention? In any case, it's
orthogonal to what the test claims to be testing.)
Change-Id: Idfa99b6512ad139e755e82b8b89548ab08f0afcf
Reviewers: arsenm, rampitec
Subscribers: MatzeB, qcolombet, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D48018
llvm-svn: 335229
2018-06-21 21:37:19 +08:00
|
|
|
%tex = call <4 x float> @llvm.amdgcn.image.sample.1d.v4f32.f32(i32 15, float %c, <8 x i32> undef, <4 x i32> undef, i1 0, i32 0, i32 0)
|
AMDGPU: add execfix flag to SI_ELSE
Summary:
SI_ELSE is lowered into two parts:
s_or_saveexec_b64 dst, src (at the start of the basic block)
s_xor_b64 exec, exec, dst (at the end of the basic block)
The idea is that dst contains the exec mask of the preceding IF block. It can
happen that SIWholeQuadMode decides to switch from WQM to Exact mode inside
the basic block that contains SI_ELSE, in which case it introduces an instruction
s_and_b64 exec, exec, s[...]
which masks out bits that can correspond to both the IF and the ELSE paths.
So the resulting sequence must be:
s_or_savexec_b64 dst, src
s_and_b64 exec, exec, s[...] <-- added by SIWholeQuadMode
s_and_b64 dst, dst, exec <-- added by SILowerControlFlow
s_xor_b64 exec, exec, dst
Whether to add the additional s_and_b64 dst, dst, exec is currently determined
via the ExecModified tracking. With this change, it is instead determined by
an additional flag on SI_ELSE which is set by SIWholeQuadMode.
Finally: It also occured to me that an alternative approach for the long run
is for SILowerControlFlow to unconditionally emit
s_or_saveexec_b64 dst, src
...
s_and_b64 dst, dst, exec
s_xor_b64 exec, exec, dst
and have a pass that detects and cleans up the "redundant AND with exec"
pattern where possible. This could be useful anyway, because we also add
instructions
s_and_b64 vcc, exec, vcc
before s_cbranch_scc (in moveToALU), and those are often redundant. I have
some pending changes to how KILL is lowered that could also benefit from
such a cleanup pass.
In any case, this current patch could help in the short term with the whole
ExecModified business.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D22846
llvm-svn: 276972
2016-07-28 19:39:24 +08:00
|
|
|
%v.else = extractelement <4 x float> %tex, i32 0
|
|
|
|
br label %end
|
|
|
|
|
|
|
|
end:
|
|
|
|
%r = phi float [ %v.if, %if ], [ %v.else, %else ]
|
|
|
|
call void @llvm.amdgcn.buffer.store.f32(float %r, <4 x i32> undef, i32 0, i32 0, i1 0, i1 0)
|
|
|
|
ret void
|
|
|
|
}
|
|
|
|
|
2017-03-22 00:24:12 +08:00
|
|
|
declare void @llvm.amdgcn.buffer.store.f32(float, <4 x i32>, i32, i32, i1, i1) #1
|
AMDGPU: Convert test cases to the dimension-aware intrinsics
Summary:
Also explicitly port over some tests in llvm.amdgcn.image.* that were
missing. Some tests are removed because they no longer apply (i.e.
explicitly testing building an address vector via insertelement).
This is in preparation for the eventual removal of the old-style
intrinsics.
Some additional notes:
- constant-address-space-32bit.ll: change some GCN-NEXT to GCN because
the instruction schedule was subtly altered
- insert_vector_elt.ll: the old test didn't actually test anything,
because %tmp1 was not used; remove the load, because it doesn't work
(Because of the amdgpu_ps calling convention? In any case, it's
orthogonal to what the test claims to be testing.)
Change-Id: Idfa99b6512ad139e755e82b8b89548ab08f0afcf
Reviewers: arsenm, rampitec
Subscribers: MatzeB, qcolombet, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D48018
llvm-svn: 335229
2018-06-21 21:37:19 +08:00
|
|
|
declare <4 x float> @llvm.amdgcn.image.sample.1d.v4f32.f32(i32, float, <8 x i32>, <4 x i32>, i1, i32, i32) #2
|
AMDGPU: add execfix flag to SI_ELSE
Summary:
SI_ELSE is lowered into two parts:
s_or_saveexec_b64 dst, src (at the start of the basic block)
s_xor_b64 exec, exec, dst (at the end of the basic block)
The idea is that dst contains the exec mask of the preceding IF block. It can
happen that SIWholeQuadMode decides to switch from WQM to Exact mode inside
the basic block that contains SI_ELSE, in which case it introduces an instruction
s_and_b64 exec, exec, s[...]
which masks out bits that can correspond to both the IF and the ELSE paths.
So the resulting sequence must be:
s_or_savexec_b64 dst, src
s_and_b64 exec, exec, s[...] <-- added by SIWholeQuadMode
s_and_b64 dst, dst, exec <-- added by SILowerControlFlow
s_xor_b64 exec, exec, dst
Whether to add the additional s_and_b64 dst, dst, exec is currently determined
via the ExecModified tracking. With this change, it is instead determined by
an additional flag on SI_ELSE which is set by SIWholeQuadMode.
Finally: It also occured to me that an alternative approach for the long run
is for SILowerControlFlow to unconditionally emit
s_or_saveexec_b64 dst, src
...
s_and_b64 dst, dst, exec
s_xor_b64 exec, exec, dst
and have a pass that detects and cleans up the "redundant AND with exec"
pattern where possible. This could be useful anyway, because we also add
instructions
s_and_b64 vcc, exec, vcc
before s_cbranch_scc (in moveToALU), and those are often redundant. I have
some pending changes to how KILL is lowered that could also benefit from
such a cleanup pass.
In any case, this current patch could help in the short term with the whole
ExecModified business.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D22846
llvm-svn: 276972
2016-07-28 19:39:24 +08:00
|
|
|
|
2017-03-22 00:24:12 +08:00
|
|
|
attributes #0 = { nounwind }
|
|
|
|
attributes #1 = { nounwind writeonly }
|
|
|
|
attributes #2 = { nounwind readonly }
|