maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/X86/vselect-constants.ll

259 lines
8.8 KiB
LLVM
Raw Normal View History

[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; NOTE: Assertions have been autogenerated by utils/update_llc_test_checks.py
; RUN: llc < %s -mtriple=x86_64-unknown-unknown -mattr=sse2 | FileCheck %s --check-prefix=ALL --check-prefix=SSE
; RUN: llc < %s -mtriple=x86_64-unknown-unknown -mattr=avx | FileCheck %s --check-prefix=ALL --check-prefix=AVX
; First, check the generic pattern for any 2 vector constants. Then, check special cases where
; the constants are all off-by-one. Finally, check the extra special cases where the constants
; include 0 or -1.
; Each minimal select test is repeated with a more typical pattern that includes a compare to
; generate the condition value.
[DAG] convert vector select-of-constants to logic/math This goes back to a discussion about IR canonicalization. We'd like to preserve and convert more IR to 'select' than we currently do because that's likely the best choice in IR: http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html ...but that's often not true for codegen, so we need to account for this pattern coming in to the backend and transform it to better DAG ops. Steps in this patch: 1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely enable this transform. Other targets will probably want that anyway to distinguish scalars from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary. 2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the vector ext is often free. Implementing a more general fold using xor+and can be a follow-up for targets that don't have a legal vselect. It's also possible that we can remove the TLI hook for the special case fold implemented here because we're eliminating a constant, but it needs to be tested on other targets. Differential Revision: https://reviews.llvm.org/D36840 llvm-svn: 311731
2017-08-25 07:24:43 +08:00
; TODO: If we don't have blendv, this can definitely be improved. There's also a selection of
; chips where it makes sense to transform the general case blendv to 2 bit-ops. That should be
; a uarch-specfic transform. At some point (Ryzen?), the implementation should catch up to the
; architecture, so blendv is as fast as a single bit-op.
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
define <4 x i32> @sel_C1_or_C2_vec(<4 x i1> %cond) {
; SSE-LABEL: sel_C1_or_C2_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; SSE: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: pslld $31, %xmm0
; SSE-NEXT: psrad $31, %xmm0
; SSE-NEXT: movdqa %xmm0, %xmm1
; SSE-NEXT: pandn {{.*}}(%rip), %xmm1
; SSE-NEXT: pand {{.*}}(%rip), %xmm0
; SSE-NEXT: por %xmm1, %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: sel_C1_or_C2_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; AVX: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: vpslld $31, %xmm0, %xmm0
; AVX-NEXT: vmovaps {{.*#+}} xmm1 = [42,0,4294967294,4294967295]
; AVX-NEXT: vblendvps %xmm0, {{.*}}(%rip), %xmm1, %xmm0
; AVX-NEXT: retq
%add = select <4 x i1> %cond, <4 x i32> <i32 3000, i32 1, i32 -1, i32 0>, <4 x i32> <i32 42, i32 0, i32 -2, i32 -1>
ret <4 x i32> %add
}
define <4 x i32> @cmp_sel_C1_or_C2_vec(<4 x i32> %x, <4 x i32> %y) {
; SSE-LABEL: cmp_sel_C1_or_C2_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; SSE: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: pcmpeqd %xmm1, %xmm0
; SSE-NEXT: movdqa %xmm0, %xmm1
; SSE-NEXT: pandn {{.*}}(%rip), %xmm1
; SSE-NEXT: pand {{.*}}(%rip), %xmm0
; SSE-NEXT: por %xmm1, %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: cmp_sel_C1_or_C2_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; AVX: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: vpcmpeqd %xmm1, %xmm0, %xmm0
; AVX-NEXT: vmovaps {{.*#+}} xmm1 = [42,0,4294967294,4294967295]
; AVX-NEXT: vblendvps %xmm0, {{.*}}(%rip), %xmm1, %xmm0
; AVX-NEXT: retq
%cond = icmp eq <4 x i32> %x, %y
%add = select <4 x i1> %cond, <4 x i32> <i32 3000, i32 1, i32 -1, i32 0>, <4 x i32> <i32 42, i32 0, i32 -2, i32 -1>
ret <4 x i32> %add
}
define <4 x i32> @sel_Cplus1_or_C_vec(<4 x i1> %cond) {
; SSE-LABEL: sel_Cplus1_or_C_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; SSE: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: pand {{.*}}(%rip), %xmm0
[DAG] convert vector select-of-constants to logic/math This goes back to a discussion about IR canonicalization. We'd like to preserve and convert more IR to 'select' than we currently do because that's likely the best choice in IR: http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html ...but that's often not true for codegen, so we need to account for this pattern coming in to the backend and transform it to better DAG ops. Steps in this patch: 1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely enable this transform. Other targets will probably want that anyway to distinguish scalars from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary. 2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the vector ext is often free. Implementing a more general fold using xor+and can be a follow-up for targets that don't have a legal vselect. It's also possible that we can remove the TLI hook for the special case fold implemented here because we're eliminating a constant, but it needs to be tested on other targets. Differential Revision: https://reviews.llvm.org/D36840 llvm-svn: 311731
2017-08-25 07:24:43 +08:00
; SSE-NEXT: paddd {{.*}}(%rip), %xmm0
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: retq
;
; AVX-LABEL: sel_Cplus1_or_C_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; AVX: # %bb.0:
[DAG] convert vector select-of-constants to logic/math This goes back to a discussion about IR canonicalization. We'd like to preserve and convert more IR to 'select' than we currently do because that's likely the best choice in IR: http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html ...but that's often not true for codegen, so we need to account for this pattern coming in to the backend and transform it to better DAG ops. Steps in this patch: 1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely enable this transform. Other targets will probably want that anyway to distinguish scalars from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary. 2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the vector ext is often free. Implementing a more general fold using xor+and can be a follow-up for targets that don't have a legal vselect. It's also possible that we can remove the TLI hook for the special case fold implemented here because we're eliminating a constant, but it needs to be tested on other targets. Differential Revision: https://reviews.llvm.org/D36840 llvm-svn: 311731
2017-08-25 07:24:43 +08:00
; AVX-NEXT: vpand {{.*}}(%rip), %xmm0, %xmm0
; AVX-NEXT: vpaddd {{.*}}(%rip), %xmm0, %xmm0
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: retq
%add = select <4 x i1> %cond, <4 x i32> <i32 43, i32 1, i32 -1, i32 0>, <4 x i32> <i32 42, i32 0, i32 -2, i32 -1>
ret <4 x i32> %add
}
define <4 x i32> @cmp_sel_Cplus1_or_C_vec(<4 x i32> %x, <4 x i32> %y) {
; SSE-LABEL: cmp_sel_Cplus1_or_C_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; SSE: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: pcmpeqd %xmm1, %xmm0
[DAG] convert vector select-of-constants to logic/math This goes back to a discussion about IR canonicalization. We'd like to preserve and convert more IR to 'select' than we currently do because that's likely the best choice in IR: http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html ...but that's often not true for codegen, so we need to account for this pattern coming in to the backend and transform it to better DAG ops. Steps in this patch: 1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely enable this transform. Other targets will probably want that anyway to distinguish scalars from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary. 2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the vector ext is often free. Implementing a more general fold using xor+and can be a follow-up for targets that don't have a legal vselect. It's also possible that we can remove the TLI hook for the special case fold implemented here because we're eliminating a constant, but it needs to be tested on other targets. Differential Revision: https://reviews.llvm.org/D36840 llvm-svn: 311731
2017-08-25 07:24:43 +08:00
; SSE-NEXT: movdqa {{.*#+}} xmm1 = [42,0,4294967294,4294967295]
; SSE-NEXT: psubd %xmm0, %xmm1
; SSE-NEXT: movdqa %xmm1, %xmm0
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: retq
;
; AVX-LABEL: cmp_sel_Cplus1_or_C_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; AVX: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: vpcmpeqd %xmm1, %xmm0, %xmm0
[DAG] convert vector select-of-constants to logic/math This goes back to a discussion about IR canonicalization. We'd like to preserve and convert more IR to 'select' than we currently do because that's likely the best choice in IR: http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html ...but that's often not true for codegen, so we need to account for this pattern coming in to the backend and transform it to better DAG ops. Steps in this patch: 1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely enable this transform. Other targets will probably want that anyway to distinguish scalars from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary. 2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the vector ext is often free. Implementing a more general fold using xor+and can be a follow-up for targets that don't have a legal vselect. It's also possible that we can remove the TLI hook for the special case fold implemented here because we're eliminating a constant, but it needs to be tested on other targets. Differential Revision: https://reviews.llvm.org/D36840 llvm-svn: 311731
2017-08-25 07:24:43 +08:00
; AVX-NEXT: vmovdqa {{.*#+}} xmm1 = [42,0,4294967294,4294967295]
; AVX-NEXT: vpsubd %xmm0, %xmm1, %xmm0
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: retq
%cond = icmp eq <4 x i32> %x, %y
%add = select <4 x i1> %cond, <4 x i32> <i32 43, i32 1, i32 -1, i32 0>, <4 x i32> <i32 42, i32 0, i32 -2, i32 -1>
ret <4 x i32> %add
}
define <4 x i32> @sel_Cminus1_or_C_vec(<4 x i1> %cond) {
; SSE-LABEL: sel_Cminus1_or_C_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; SSE: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: pslld $31, %xmm0
; SSE-NEXT: psrad $31, %xmm0
[DAG] convert vector select-of-constants to logic/math This goes back to a discussion about IR canonicalization. We'd like to preserve and convert more IR to 'select' than we currently do because that's likely the best choice in IR: http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html ...but that's often not true for codegen, so we need to account for this pattern coming in to the backend and transform it to better DAG ops. Steps in this patch: 1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely enable this transform. Other targets will probably want that anyway to distinguish scalars from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary. 2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the vector ext is often free. Implementing a more general fold using xor+and can be a follow-up for targets that don't have a legal vselect. It's also possible that we can remove the TLI hook for the special case fold implemented here because we're eliminating a constant, but it needs to be tested on other targets. Differential Revision: https://reviews.llvm.org/D36840 llvm-svn: 311731
2017-08-25 07:24:43 +08:00
; SSE-NEXT: paddd {{.*}}(%rip), %xmm0
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: retq
;
; AVX-LABEL: sel_Cminus1_or_C_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; AVX: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: vpslld $31, %xmm0, %xmm0
[DAG] convert vector select-of-constants to logic/math This goes back to a discussion about IR canonicalization. We'd like to preserve and convert more IR to 'select' than we currently do because that's likely the best choice in IR: http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html ...but that's often not true for codegen, so we need to account for this pattern coming in to the backend and transform it to better DAG ops. Steps in this patch: 1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely enable this transform. Other targets will probably want that anyway to distinguish scalars from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary. 2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the vector ext is often free. Implementing a more general fold using xor+and can be a follow-up for targets that don't have a legal vselect. It's also possible that we can remove the TLI hook for the special case fold implemented here because we're eliminating a constant, but it needs to be tested on other targets. Differential Revision: https://reviews.llvm.org/D36840 llvm-svn: 311731
2017-08-25 07:24:43 +08:00
; AVX-NEXT: vpsrad $31, %xmm0, %xmm0
; AVX-NEXT: vpaddd {{.*}}(%rip), %xmm0, %xmm0
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: retq
%add = select <4 x i1> %cond, <4 x i32> <i32 43, i32 1, i32 -1, i32 0>, <4 x i32> <i32 44, i32 2, i32 0, i32 1>
ret <4 x i32> %add
}
define <4 x i32> @cmp_sel_Cminus1_or_C_vec(<4 x i32> %x, <4 x i32> %y) {
; SSE-LABEL: cmp_sel_Cminus1_or_C_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; SSE: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: pcmpeqd %xmm1, %xmm0
[DAG] convert vector select-of-constants to logic/math This goes back to a discussion about IR canonicalization. We'd like to preserve and convert more IR to 'select' than we currently do because that's likely the best choice in IR: http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html ...but that's often not true for codegen, so we need to account for this pattern coming in to the backend and transform it to better DAG ops. Steps in this patch: 1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely enable this transform. Other targets will probably want that anyway to distinguish scalars from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary. 2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the vector ext is often free. Implementing a more general fold using xor+and can be a follow-up for targets that don't have a legal vselect. It's also possible that we can remove the TLI hook for the special case fold implemented here because we're eliminating a constant, but it needs to be tested on other targets. Differential Revision: https://reviews.llvm.org/D36840 llvm-svn: 311731
2017-08-25 07:24:43 +08:00
; SSE-NEXT: paddd {{.*}}(%rip), %xmm0
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: retq
;
; AVX-LABEL: cmp_sel_Cminus1_or_C_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; AVX: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: vpcmpeqd %xmm1, %xmm0, %xmm0
[DAG] convert vector select-of-constants to logic/math This goes back to a discussion about IR canonicalization. We'd like to preserve and convert more IR to 'select' than we currently do because that's likely the best choice in IR: http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html ...but that's often not true for codegen, so we need to account for this pattern coming in to the backend and transform it to better DAG ops. Steps in this patch: 1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely enable this transform. Other targets will probably want that anyway to distinguish scalars from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary. 2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the vector ext is often free. Implementing a more general fold using xor+and can be a follow-up for targets that don't have a legal vselect. It's also possible that we can remove the TLI hook for the special case fold implemented here because we're eliminating a constant, but it needs to be tested on other targets. Differential Revision: https://reviews.llvm.org/D36840 llvm-svn: 311731
2017-08-25 07:24:43 +08:00
; AVX-NEXT: vpaddd {{.*}}(%rip), %xmm0, %xmm0
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: retq
%cond = icmp eq <4 x i32> %x, %y
%add = select <4 x i1> %cond, <4 x i32> <i32 43, i32 1, i32 -1, i32 0>, <4 x i32> <i32 44, i32 2, i32 0, i32 1>
ret <4 x i32> %add
}
define <4 x i32> @sel_minus1_or_0_vec(<4 x i1> %cond) {
; SSE-LABEL: sel_minus1_or_0_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; SSE: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: pslld $31, %xmm0
; SSE-NEXT: psrad $31, %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: sel_minus1_or_0_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; AVX: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: vpslld $31, %xmm0, %xmm0
; AVX-NEXT: vpsrad $31, %xmm0, %xmm0
; AVX-NEXT: retq
%add = select <4 x i1> %cond, <4 x i32> <i32 -1, i32 -1, i32 -1, i32 -1>, <4 x i32> <i32 0, i32 0, i32 0, i32 0>
ret <4 x i32> %add
}
define <4 x i32> @cmp_sel_minus1_or_0_vec(<4 x i32> %x, <4 x i32> %y) {
; SSE-LABEL: cmp_sel_minus1_or_0_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; SSE: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: pcmpeqd %xmm1, %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: cmp_sel_minus1_or_0_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; AVX: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: vpcmpeqd %xmm1, %xmm0, %xmm0
; AVX-NEXT: retq
%cond = icmp eq <4 x i32> %x, %y
%add = select <4 x i1> %cond, <4 x i32> <i32 -1, i32 -1, i32 -1, i32 -1>, <4 x i32> <i32 0, i32 0, i32 0, i32 0>
ret <4 x i32> %add
}
define <4 x i32> @sel_0_or_minus1_vec(<4 x i1> %cond) {
; SSE-LABEL: sel_0_or_minus1_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; SSE: # %bb.0:
[DAG] convert vector select-of-constants to logic/math This goes back to a discussion about IR canonicalization. We'd like to preserve and convert more IR to 'select' than we currently do because that's likely the best choice in IR: http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html ...but that's often not true for codegen, so we need to account for this pattern coming in to the backend and transform it to better DAG ops. Steps in this patch: 1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely enable this transform. Other targets will probably want that anyway to distinguish scalars from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary. 2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the vector ext is often free. Implementing a more general fold using xor+and can be a follow-up for targets that don't have a legal vselect. It's also possible that we can remove the TLI hook for the special case fold implemented here because we're eliminating a constant, but it needs to be tested on other targets. Differential Revision: https://reviews.llvm.org/D36840 llvm-svn: 311731
2017-08-25 07:24:43 +08:00
; SSE-NEXT: pand {{.*}}(%rip), %xmm0
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: pcmpeqd %xmm1, %xmm1
[DAG] convert vector select-of-constants to logic/math This goes back to a discussion about IR canonicalization. We'd like to preserve and convert more IR to 'select' than we currently do because that's likely the best choice in IR: http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html ...but that's often not true for codegen, so we need to account for this pattern coming in to the backend and transform it to better DAG ops. Steps in this patch: 1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely enable this transform. Other targets will probably want that anyway to distinguish scalars from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary. 2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the vector ext is often free. Implementing a more general fold using xor+and can be a follow-up for targets that don't have a legal vselect. It's also possible that we can remove the TLI hook for the special case fold implemented here because we're eliminating a constant, but it needs to be tested on other targets. Differential Revision: https://reviews.llvm.org/D36840 llvm-svn: 311731
2017-08-25 07:24:43 +08:00
; SSE-NEXT: paddd %xmm1, %xmm0
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: retq
;
; AVX-LABEL: sel_0_or_minus1_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; AVX: # %bb.0:
[DAG] convert vector select-of-constants to logic/math This goes back to a discussion about IR canonicalization. We'd like to preserve and convert more IR to 'select' than we currently do because that's likely the best choice in IR: http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html ...but that's often not true for codegen, so we need to account for this pattern coming in to the backend and transform it to better DAG ops. Steps in this patch: 1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely enable this transform. Other targets will probably want that anyway to distinguish scalars from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary. 2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the vector ext is often free. Implementing a more general fold using xor+and can be a follow-up for targets that don't have a legal vselect. It's also possible that we can remove the TLI hook for the special case fold implemented here because we're eliminating a constant, but it needs to be tested on other targets. Differential Revision: https://reviews.llvm.org/D36840 llvm-svn: 311731
2017-08-25 07:24:43 +08:00
; AVX-NEXT: vpand {{.*}}(%rip), %xmm0, %xmm0
; AVX-NEXT: vpcmpeqd %xmm1, %xmm1, %xmm1
; AVX-NEXT: vpaddd %xmm1, %xmm0, %xmm0
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: retq
%add = select <4 x i1> %cond, <4 x i32> <i32 0, i32 0, i32 0, i32 0>, <4 x i32> <i32 -1, i32 -1, i32 -1, i32 -1>
ret <4 x i32> %add
}
define <4 x i32> @cmp_sel_0_or_minus1_vec(<4 x i32> %x, <4 x i32> %y) {
; SSE-LABEL: cmp_sel_0_or_minus1_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; SSE: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: pcmpeqd %xmm1, %xmm0
; SSE-NEXT: pcmpeqd %xmm1, %xmm1
; SSE-NEXT: pxor %xmm1, %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: cmp_sel_0_or_minus1_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; AVX: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: vpcmpeqd %xmm1, %xmm0, %xmm0
; AVX-NEXT: vpcmpeqd %xmm1, %xmm1, %xmm1
; AVX-NEXT: vpxor %xmm1, %xmm0, %xmm0
; AVX-NEXT: retq
%cond = icmp eq <4 x i32> %x, %y
%add = select <4 x i1> %cond, <4 x i32> <i32 0, i32 0, i32 0, i32 0>, <4 x i32> <i32 -1, i32 -1, i32 -1, i32 -1>
ret <4 x i32> %add
}
define <4 x i32> @sel_1_or_0_vec(<4 x i1> %cond) {
; SSE-LABEL: sel_1_or_0_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; SSE: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: andps {{.*}}(%rip), %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: sel_1_or_0_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; AVX: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: vandps {{.*}}(%rip), %xmm0, %xmm0
; AVX-NEXT: retq
%add = select <4 x i1> %cond, <4 x i32> <i32 1, i32 1, i32 1, i32 1>, <4 x i32> <i32 0, i32 0, i32 0, i32 0>
ret <4 x i32> %add
}
define <4 x i32> @cmp_sel_1_or_0_vec(<4 x i32> %x, <4 x i32> %y) {
; SSE-LABEL: cmp_sel_1_or_0_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; SSE: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: pcmpeqd %xmm1, %xmm0
; SSE-NEXT: psrld $31, %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: cmp_sel_1_or_0_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; AVX: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: vpcmpeqd %xmm1, %xmm0, %xmm0
; AVX-NEXT: vpsrld $31, %xmm0, %xmm0
; AVX-NEXT: retq
%cond = icmp eq <4 x i32> %x, %y
%add = select <4 x i1> %cond, <4 x i32> <i32 1, i32 1, i32 1, i32 1>, <4 x i32> <i32 0, i32 0, i32 0, i32 0>
ret <4 x i32> %add
}
define <4 x i32> @sel_0_or_1_vec(<4 x i1> %cond) {
; SSE-LABEL: sel_0_or_1_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; SSE: # %bb.0:
[DAG] convert vector select-of-constants to logic/math This goes back to a discussion about IR canonicalization. We'd like to preserve and convert more IR to 'select' than we currently do because that's likely the best choice in IR: http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html ...but that's often not true for codegen, so we need to account for this pattern coming in to the backend and transform it to better DAG ops. Steps in this patch: 1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely enable this transform. Other targets will probably want that anyway to distinguish scalars from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary. 2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the vector ext is often free. Implementing a more general fold using xor+and can be a follow-up for targets that don't have a legal vselect. It's also possible that we can remove the TLI hook for the special case fold implemented here because we're eliminating a constant, but it needs to be tested on other targets. Differential Revision: https://reviews.llvm.org/D36840 llvm-svn: 311731
2017-08-25 07:24:43 +08:00
; SSE-NEXT: andnps {{.*}}(%rip), %xmm0
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: retq
;
; AVX-LABEL: sel_0_or_1_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; AVX: # %bb.0:
[DAG] convert vector select-of-constants to logic/math This goes back to a discussion about IR canonicalization. We'd like to preserve and convert more IR to 'select' than we currently do because that's likely the best choice in IR: http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html ...but that's often not true for codegen, so we need to account for this pattern coming in to the backend and transform it to better DAG ops. Steps in this patch: 1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely enable this transform. Other targets will probably want that anyway to distinguish scalars from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary. 2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the vector ext is often free. Implementing a more general fold using xor+and can be a follow-up for targets that don't have a legal vselect. It's also possible that we can remove the TLI hook for the special case fold implemented here because we're eliminating a constant, but it needs to be tested on other targets. Differential Revision: https://reviews.llvm.org/D36840 llvm-svn: 311731
2017-08-25 07:24:43 +08:00
; AVX-NEXT: vandnps {{.*}}(%rip), %xmm0, %xmm0
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: retq
%add = select <4 x i1> %cond, <4 x i32> <i32 0, i32 0, i32 0, i32 0>, <4 x i32> <i32 1, i32 1, i32 1, i32 1>
ret <4 x i32> %add
}
define <4 x i32> @cmp_sel_0_or_1_vec(<4 x i32> %x, <4 x i32> %y) {
; SSE-LABEL: cmp_sel_0_or_1_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; SSE: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; SSE-NEXT: pcmpeqd %xmm1, %xmm0
; SSE-NEXT: pandn {{.*}}(%rip), %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: cmp_sel_0_or_1_vec:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; AVX: # %bb.0:
[x86] add tests for vector select-of-constants; NFC We've discussed canonicalizing to this form in IR, so the backend should be prepared to lower these in ways better than what we see here in most cases. llvm-svn: 311103
2017-08-18 01:07:37 +08:00
; AVX-NEXT: vpcmpeqd %xmm1, %xmm0, %xmm0
; AVX-NEXT: vpandn {{.*}}(%rip), %xmm0, %xmm0
; AVX-NEXT: retq
%cond = icmp eq <4 x i32> %x, %y
%add = select <4 x i1> %cond, <4 x i32> <i32 0, i32 0, i32 0, i32 0>, <4 x i32> <i32 1, i32 1, i32 1, i32 1>
ret <4 x i32> %add
}