Fix symbol resolution of floating point libc builtins in MCJIT
Fix for LLI failure on Windows\X86: http://llvm.org/PR5053
LLI.exe crashes on Windows\X86 when single precession floating point
intrinsics like the following are used: acos, asin, atan, atan2, ceil,
copysign, cos, cosh, exp, floor, fmin, fmax, fmod, log, pow, sin, sinh,
sqrt, tan, tanh
The above intrinsics are defined as inline-expansions in math.h, and are
not exported by msvcr120.dll (Win32 API GetProcAddress returns null).
For an FREM instruction, the JIT compiler generates a call to a stub for
the fmodf() intrinsic, and adds a relocation to fixup at load time. The
loader searches the libraries for the function, but fails because the
symbol is not exported. So, the call target remains NULL and the
execution crashes.
Since the math functions are loaded at JIT/runtime, the JIT can patch
CALL instruction directly instead of the searching the libraries'
exported symbols. However, this fix caused build failures due to
unresolved symbols like _fmodf at link time.
Therefore, the current fix defines helper functions in the Runtime
link/load library to perform the above operations. The address of these
helper functions are used to patch up the CALL instruction at load time.
Reviewers: lhames, rnk
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D5387
Patch by Swaroop Sridhar!
llvm-svn: 221947
2014-11-14 07:32:52 +08:00
|
|
|
; LLI.exe used to crash on Windows\X86 when certain single precession
|
|
|
|
|
; floating point intrinsics (defined as macros) are used.
|
|
|
|
|
; This unit test guards against the failure.
|
|
|
|
|
;
|
|
|
|
|
; RUN: %lli %s | FileCheck %s
|
|
|
|
|
|
|
|
|
|
@flt = internal global float 12.0e+0
|
|
|
|
|
@str = internal constant [18 x i8] c"Double value: %f\0A\00"
|
|
|
|
|
|
|
|
|
|
declare i32 @printf(i8* nocapture, ...) nounwind
|
2015-02-19 03:32:28 +08:00
|
|
|
declare i32 @fflush(i8*) nounwind
|
Fix symbol resolution of floating point libc builtins in MCJIT
Fix for LLI failure on Windows\X86: http://llvm.org/PR5053
LLI.exe crashes on Windows\X86 when single precession floating point
intrinsics like the following are used: acos, asin, atan, atan2, ceil,
copysign, cos, cosh, exp, floor, fmin, fmax, fmod, log, pow, sin, sinh,
sqrt, tan, tanh
The above intrinsics are defined as inline-expansions in math.h, and are
not exported by msvcr120.dll (Win32 API GetProcAddress returns null).
For an FREM instruction, the JIT compiler generates a call to a stub for
the fmodf() intrinsic, and adds a relocation to fixup at load time. The
loader searches the libraries for the function, but fails because the
symbol is not exported. So, the call target remains NULL and the
execution crashes.
Since the math functions are loaded at JIT/runtime, the JIT can patch
CALL instruction directly instead of the searching the libraries'
exported symbols. However, this fix caused build failures due to
unresolved symbols like _fmodf at link time.
Therefore, the current fix defines helper functions in the Runtime
link/load library to perform the above operations. The address of these
helper functions are used to patch up the CALL instruction at load time.
Reviewers: lhames, rnk
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D5387
Patch by Swaroop Sridhar!
llvm-svn: 221947
2014-11-14 07:32:52 +08:00
|
|
|
|
|
|
|
|
define i32 @main() {
|
2015-02-28 05:17:42 +08:00
|
|
|
%flt = load float, float* @flt
|
Fix symbol resolution of floating point libc builtins in MCJIT
Fix for LLI failure on Windows\X86: http://llvm.org/PR5053
LLI.exe crashes on Windows\X86 when single precession floating point
intrinsics like the following are used: acos, asin, atan, atan2, ceil,
copysign, cos, cosh, exp, floor, fmin, fmax, fmod, log, pow, sin, sinh,
sqrt, tan, tanh
The above intrinsics are defined as inline-expansions in math.h, and are
not exported by msvcr120.dll (Win32 API GetProcAddress returns null).
For an FREM instruction, the JIT compiler generates a call to a stub for
the fmodf() intrinsic, and adds a relocation to fixup at load time. The
loader searches the libraries for the function, but fails because the
symbol is not exported. So, the call target remains NULL and the
execution crashes.
Since the math functions are loaded at JIT/runtime, the JIT can patch
CALL instruction directly instead of the searching the libraries'
exported symbols. However, this fix caused build failures due to
unresolved symbols like _fmodf at link time.
Therefore, the current fix defines helper functions in the Runtime
link/load library to perform the above operations. The address of these
helper functions are used to patch up the CALL instruction at load time.
Reviewers: lhames, rnk
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D5387
Patch by Swaroop Sridhar!
llvm-svn: 221947
2014-11-14 07:32:52 +08:00
|
|
|
%float2 = frem float %flt, 5.0
|
|
|
|
|
%double1 = fpext float %float2 to double
|
[opaque pointer type] Add textual IR support for explicit type parameter to the call instruction
See r230786 and r230794 for similar changes to gep and load
respectively.
Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.
When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.
This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.
This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).
No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.
This leaves /only/ the varargs case where the explicit type is required.
Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.
About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.
import fileinput
import sys
import re
pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")
def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]
for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))
llvm-svn: 235145
2015-04-17 07:24:18 +08:00
|
|
|
call i32 (i8*, ...) @printf(i8* getelementptr ([18 x i8], [18 x i8]* @str, i32 0, i64 0), double %double1)
|
2015-02-19 03:32:28 +08:00
|
|
|
call i32 @fflush(i8* null)
|
Fix symbol resolution of floating point libc builtins in MCJIT
Fix for LLI failure on Windows\X86: http://llvm.org/PR5053
LLI.exe crashes on Windows\X86 when single precession floating point
intrinsics like the following are used: acos, asin, atan, atan2, ceil,
copysign, cos, cosh, exp, floor, fmin, fmax, fmod, log, pow, sin, sinh,
sqrt, tan, tanh
The above intrinsics are defined as inline-expansions in math.h, and are
not exported by msvcr120.dll (Win32 API GetProcAddress returns null).
For an FREM instruction, the JIT compiler generates a call to a stub for
the fmodf() intrinsic, and adds a relocation to fixup at load time. The
loader searches the libraries for the function, but fails because the
symbol is not exported. So, the call target remains NULL and the
execution crashes.
Since the math functions are loaded at JIT/runtime, the JIT can patch
CALL instruction directly instead of the searching the libraries'
exported symbols. However, this fix caused build failures due to
unresolved symbols like _fmodf at link time.
Therefore, the current fix defines helper functions in the Runtime
link/load library to perform the above operations. The address of these
helper functions are used to patch up the CALL instruction at load time.
Reviewers: lhames, rnk
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D5387
Patch by Swaroop Sridhar!
llvm-svn: 221947
2014-11-14 07:32:52 +08:00
|
|
|
ret i32 0
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
; CHECK: Double value: 2.0
|