maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/AMDGPU/amdgpu.private-memory.ll

557 lines
22 KiB
LLVM
Raw Normal View History

AMDGPU: Run LoadStoreVectorizer pass by default llvm-svn: 281112
2016-09-10 06:29:28 +08:00
; RUN: llc -show-mc-encoding -mattr=+promote-alloca -amdgpu-load-store-vectorizer=0 -verify-machineinstrs -march=amdgcn < %s | FileCheck %s -check-prefix=SI-PROMOTE -check-prefix=SI -check-prefix=FUNC
; RUN: llc -show-mc-encoding -mattr=+promote-alloca -amdgpu-load-store-vectorizer=0 -verify-machineinstrs -mtriple=amdgcn--amdhsa -mcpu=kaveri -mattr=-unaligned-buffer-access < %s | FileCheck %s -check-prefix=SI-PROMOTE -check-prefix=SI -check-prefix=FUNC -check-prefix=HSA-PROMOTE
; RUN: llc -show-mc-encoding -mattr=-promote-alloca -amdgpu-load-store-vectorizer=0 -verify-machineinstrs -march=amdgcn < %s | FileCheck %s -check-prefix=SI-ALLOCA -check-prefix=SI -check-prefix=FUNC
; RUN: llc -show-mc-encoding -mattr=-promote-alloca -amdgpu-load-store-vectorizer=0 -verify-machineinstrs -mtriple=amdgcn-amdhsa -mcpu=kaveri -mattr=-unaligned-buffer-access < %s | FileCheck %s -check-prefix=SI-ALLOCA -check-prefix=SI -check-prefix=FUNC -check-prefix=HSA-ALLOCA
; RUN: llc -show-mc-encoding -mattr=+promote-alloca -amdgpu-load-store-vectorizer=0 -verify-machineinstrs -mtriple=amdgcn-amdhsa -march=amdgcn -mcpu=tonga -mattr=-unaligned-buffer-access < %s | FileCheck %s -check-prefix=SI-PROMOTE -check-prefix=SI -check-prefix=FUNC
; RUN: llc -show-mc-encoding -mattr=-promote-alloca -amdgpu-load-store-vectorizer=0 -verify-machineinstrs -mtriple=amdgcn-amdhsa -march=amdgcn -mcpu=tonga -mattr=-unaligned-buffer-access < %s | FileCheck %s -check-prefix=SI-ALLOCA -check-prefix=SI -check-prefix=FUNC
R600: Make sure to schedule AR register uses and defs in the same clause Reviewed-by: vljn at ovi.com llvm-svn: 183294
2013-06-05 11:43:06 +08:00
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
; RUN: opt -S -mtriple=amdgcn-unknown-amdhsa -mcpu=kaveri -amdgpu-promote-alloca < %s | FileCheck -check-prefix=HSAOPT -check-prefix=OPT %s
; RUN: opt -S -mtriple=amdgcn-unknown-unknown -mcpu=kaveri -amdgpu-promote-alloca < %s | FileCheck -check-prefix=NOHSAOPT -check-prefix=OPT %s
AMDGPU: Fix emitting invalid workitem intrinsics for HSA The AMDGPUPromoteAlloca pass was emitting the read.local.size calls, which with HSA was incorrectly selected to reading from the offset mesa uses off of the kernarg pointer. Error on intrinsics which aren't supported by HSA, and start emitting the correct IR to read the workgroup size out of the dispatch pointer. Also initialize the pass so it can be tested with opt, and start moving towards not depending on the subtarget as an argument. Start emitting errors for the intrinsics not handled with HSA. llvm-svn: 259297
2016-01-30 13:19:45 +08:00
AMDGPU: Fix promote alloca for pointer loads If the load has a pointer type, we don't want to change its type. llvm-svn: 270000
2016-05-19 07:20:24 +08:00
; RUN: llc -march=r600 -mcpu=cypress < %s | FileCheck %s -check-prefix=R600 -check-prefix=FUNC
AMDGPU: Preserve alignments on new created globals Also switch to internal linkage, and include the name of the function in the name. llvm-svn: 259911
2016-02-06 03:47:23 +08:00
; HSAOPT: @mova_same_clause.stack = internal unnamed_addr addrspace(3) global [256 x [5 x i32]] undef, align 4
; HSAOPT: @high_alignment.stack = internal unnamed_addr addrspace(3) global [256 x [8 x i32]] undef, align 16
R600: Call EmitFunctionHeader() in the AsmPrinter to populate the ELF symbol table llvm-svn: 218776
2014-10-02 01:15:17 +08:00
; FUNC-LABEL: {{^}}mova_same_clause:
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
; OPT-LABEL: @mova_same_clause(
R600/SI: Add support for i8 and i16 private loads/stores llvm-svn: 199823
2014-01-23 03:24:14 +08:00
R600: Run private-memory test with and without alloca promote The unpromoted path still needs to be tested since we can't always promote to using LDS. llvm-svn: 212894
2014-07-13 10:18:06 +08:00
; R600: LDS_WRITE
; R600: LDS_WRITE
; R600: LDS_READ
; R600: LDS_READ
AMDGPU/SI: Set the code object work group segment size when targeting HSA Reviewers: arsenm Subscribers: arsenm, llvm-commits Differential Revision: http://reviews.llvm.org/D15493 llvm-svn: 255702
2015-12-16 07:15:25 +08:00
; HSA-PROMOTE: .amd_kernel_code_t
; HSA-PROMOTE: workgroup_group_segment_byte_size = 5120
; HSA-PROMOTE: .end_amd_kernel_code_t
AMDGPU: Fix emitting invalid workitem intrinsics for HSA The AMDGPUPromoteAlloca pass was emitting the read.local.size calls, which with HSA was incorrectly selected to reading from the offset mesa uses off of the kernarg pointer. Error on intrinsics which aren't supported by HSA, and start emitting the correct IR to read the workgroup size out of the dispatch pointer. Also initialize the pass so it can be tested with opt, and start moving towards not depending on the subtarget as an argument. Start emitting errors for the intrinsics not handled with HSA. llvm-svn: 259297
2016-01-30 13:19:45 +08:00
; FIXME: These should be merged
; HSA-PROMOTE: s_load_dword s{{[0-9]+}}, s[4:5], 0x1
; HSA-PROMOTE: s_load_dword s{{[0-9]+}}, s[4:5], 0x2
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td llvm-svn: 221350
2014-11-05 22:50:53 +08:00
; SI-PROMOTE: ds_write_b32
; SI-PROMOTE: ds_write_b32
; SI-PROMOTE: ds_read_b32
; SI-PROMOTE: ds_read_b32
R600: Run private-memory test with and without alloca promote The unpromoted path still needs to be tested since we can't always promote to using LDS. llvm-svn: 212894
2014-07-13 10:18:06 +08:00
AMDGPU/SI: Set the code objects private segment size when targeting HSA. Summary: I'm not sure how things worked before without this. Reviewers: arsenm Subscribers: arsenm, llvm-commits Differential Revision: http://reviews.llvm.org/D15492 llvm-svn: 255692
2015-12-16 06:55:30 +08:00
; HSA-ALLOCA: .amd_kernel_code_t
; FIXME: Creating the emergency stack slots causes us to over-estimate scratch
; by 4 bytes.
; HSA-ALLOCA: workitem_private_segment_byte_size = 24
; HSA-ALLOCA: .end_amd_kernel_code_t
AMDGPU: Set flat_scratch from flat_scratch_init reg This was hardcoded to the static private size, but this would be missing the offset and additional size for someday when we have dynamic sizing. Also stops always initializing flat_scratch even when unused. In the future we should stop emitting this unless flat instructions are used to access private memory. For example this will initialize it almost always on VI because flat is used for global access. llvm-svn: 260658
2016-02-12 14:31:30 +08:00
; HSA-ALLOCA: s_mov_b32 flat_scratch_lo, s7
; HSA-ALLOCA: s_add_u32 s6, s6, s9
; HSA-ALLOCA: s_lshr_b32 flat_scratch_hi, s6, 8
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td llvm-svn: 221350
2014-11-05 22:50:53 +08:00
; SI-ALLOCA: buffer_store_dword v{{[0-9]+}}, v{{[0-9]+}}, s[{{[0-9]+:[0-9]+}}], s{{[0-9]+}} offen ; encoding: [0x00,0x10,0x70,0xe0
; SI-ALLOCA: buffer_store_dword v{{[0-9]+}}, v{{[0-9]+}}, s[{{[0-9]+:[0-9]+}}], s{{[0-9]+}} offen ; encoding: [0x00,0x10,0x70,0xe0
AMDGPU: Fix emitting invalid workitem intrinsics for HSA The AMDGPUPromoteAlloca pass was emitting the read.local.size calls, which with HSA was incorrectly selected to reading from the offset mesa uses off of the kernarg pointer. Error on intrinsics which aren't supported by HSA, and start emitting the correct IR to read the workgroup size out of the dispatch pointer. Also initialize the pass so it can be tested with opt, and start moving towards not depending on the subtarget as an argument. Start emitting errors for the intrinsics not handled with HSA. llvm-svn: 259297
2016-01-30 13:19:45 +08:00
; HSAOPT: [[DISPATCH_PTR:%[0-9]+]] = call noalias nonnull dereferenceable(64) i8 addrspace(2)* @llvm.amdgcn.dispatch.ptr()
; HSAOPT: [[CAST_DISPATCH_PTR:%[0-9]+]] = bitcast i8 addrspace(2)* [[DISPATCH_PTR]] to i32 addrspace(2)*
; HSAOPT: [[GEP0:%[0-9]+]] = getelementptr inbounds i32, i32 addrspace(2)* [[CAST_DISPATCH_PTR]], i64 1
; HSAOPT: [[LDXY:%[0-9]+]] = load i32, i32 addrspace(2)* [[GEP0]], align 4, !invariant.load !0
; HSAOPT: [[GEP1:%[0-9]+]] = getelementptr inbounds i32, i32 addrspace(2)* [[CAST_DISPATCH_PTR]], i64 2
; HSAOPT: [[LDZU:%[0-9]+]] = load i32, i32 addrspace(2)* [[GEP1]], align 4, !range !1, !invariant.load !0
; HSAOPT: [[EXTRACTY:%[0-9]+]] = lshr i32 [[LDXY]], 16
AMDGPU: Use inbounds when calculating workitem offset When promoting allocas to LDS, we know we are indexing into a specific area just created, and the calculation will also never overflow. Also emit some of the muls as nsw nuw, because instcombine infers this already from the range metadata. I think putting this on the other adds and muls might be OK too, but I'm not 100% sure. llvm-svn: 259545
2016-02-03 03:18:48 +08:00
; HSAOPT: [[WORKITEM_ID_X:%[0-9]+]] = call i32 @llvm.amdgcn.workitem.id.x(), !range !1
; HSAOPT: [[WORKITEM_ID_Y:%[0-9]+]] = call i32 @llvm.amdgcn.workitem.id.y(), !range !1
; HSAOPT: [[WORKITEM_ID_Z:%[0-9]+]] = call i32 @llvm.amdgcn.workitem.id.z(), !range !1
; HSAOPT: [[Y_SIZE_X_Z_SIZE:%[0-9]+]] = mul nuw nsw i32 [[EXTRACTY]], [[LDZU]]
; HSAOPT: [[YZ_X_XID:%[0-9]+]] = mul i32 [[Y_SIZE_X_Z_SIZE]], [[WORKITEM_ID_X]]
; HSAOPT: [[Y_X_Z_SIZE:%[0-9]+]] = mul nuw nsw i32 [[WORKITEM_ID_Y]], [[LDZU]]
; HSAOPT: [[ADD_YZ_X_X_YZ_SIZE:%[0-9]+]] = add i32 [[YZ_X_XID]], [[Y_X_Z_SIZE]]
; HSAOPT: [[ADD_ZID:%[0-9]+]] = add i32 [[ADD_YZ_X_X_YZ_SIZE]], [[WORKITEM_ID_Z]]
AMDGPU: Preserve alignments on new created globals Also switch to internal linkage, and include the name of the function in the name. llvm-svn: 259911
2016-02-06 03:47:23 +08:00
; HSAOPT: [[LOCAL_GEP:%[0-9]+]] = getelementptr inbounds [256 x [5 x i32]], [256 x [5 x i32]] addrspace(3)* @mova_same_clause.stack, i32 0, i32 [[ADD_ZID]]
AMDGPU: Use inbounds when calculating workitem offset When promoting allocas to LDS, we know we are indexing into a specific area just created, and the calculation will also never overflow. Also emit some of the muls as nsw nuw, because instcombine infers this already from the range metadata. I think putting this on the other adds and muls might be OK too, but I'm not 100% sure. llvm-svn: 259545
2016-02-03 03:18:48 +08:00
; HSAOPT: %arrayidx1 = getelementptr inbounds [5 x i32], [5 x i32] addrspace(3)* [[LOCAL_GEP]], i32 0, i32 {{%[0-9]+}}
; HSAOPT: %arrayidx3 = getelementptr inbounds [5 x i32], [5 x i32] addrspace(3)* [[LOCAL_GEP]], i32 0, i32 {{%[0-9]+}}
; HSAOPT: %arrayidx10 = getelementptr inbounds [5 x i32], [5 x i32] addrspace(3)* [[LOCAL_GEP]], i32 0, i32 0
; HSAOPT: %arrayidx12 = getelementptr inbounds [5 x i32], [5 x i32] addrspace(3)* [[LOCAL_GEP]], i32 0, i32 1
AMDGPU: Fix emitting invalid workitem intrinsics for HSA The AMDGPUPromoteAlloca pass was emitting the read.local.size calls, which with HSA was incorrectly selected to reading from the offset mesa uses off of the kernarg pointer. Error on intrinsics which aren't supported by HSA, and start emitting the correct IR to read the workgroup size out of the dispatch pointer. Also initialize the pass so it can be tested with opt, and start moving towards not depending on the subtarget as an argument. Start emitting errors for the intrinsics not handled with HSA. llvm-svn: 259297
2016-01-30 13:19:45 +08:00
; NOHSAOPT: call i32 @llvm.r600.read.local.size.y(), !range !0
; NOHSAOPT: call i32 @llvm.r600.read.local.size.z(), !range !0
; NOHSAOPT: call i32 @llvm.amdgcn.workitem.id.x(), !range !0
; NOHSAOPT: call i32 @llvm.amdgcn.workitem.id.y(), !range !0
; NOHSAOPT: call i32 @llvm.amdgcn.workitem.id.z(), !range !0
AMDGPU: Fix promote alloca pass creating huge arrays This was assuming it could use all memory before, which is a bad decision because it restricts occupancy. By default, only try to use enough space that could reduce occupancy to 7, an arbitrarily chosen limit. Based on the exist LDS usage, try to round up to the limit in the current tier instead of further hurting occupancy. This isn't ideal, because it doesn't accurately know how much space is going to be used for alignment padding. llvm-svn: 269708
2016-05-17 05:19:59 +08:00
define void @mova_same_clause(i32 addrspace(1)* nocapture %out, i32 addrspace(1)* nocapture %in) #0 {
R600: Make sure to schedule AR register uses and defs in the same clause Reviewed-by: vljn at ovi.com llvm-svn: 183294
2013-06-05 11:43:06 +08:00
entry:
%stack = alloca [5 x i32], align 4
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load i32, i32 addrspace(1)* %in, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx1 = getelementptr inbounds [5 x i32], [5 x i32]* %stack, i32 0, i32 %0
R600: Make sure to schedule AR register uses and defs in the same clause Reviewed-by: vljn at ovi.com llvm-svn: 183294
2013-06-05 11:43:06 +08:00
store i32 4, i32* %arrayidx1, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx2 = getelementptr inbounds i32, i32 addrspace(1)* %in, i32 1
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load i32, i32 addrspace(1)* %arrayidx2, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx3 = getelementptr inbounds [5 x i32], [5 x i32]* %stack, i32 0, i32 %1
R600: Make sure to schedule AR register uses and defs in the same clause Reviewed-by: vljn at ovi.com llvm-svn: 183294
2013-06-05 11:43:06 +08:00
store i32 5, i32* %arrayidx3, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx10 = getelementptr inbounds [5 x i32], [5 x i32]* %stack, i32 0, i32 0
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load i32, i32* %arrayidx10, align 4
R600: Make sure to schedule AR register uses and defs in the same clause Reviewed-by: vljn at ovi.com llvm-svn: 183294
2013-06-05 11:43:06 +08:00
store i32 %2, i32 addrspace(1)* %out, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx12 = getelementptr inbounds [5 x i32], [5 x i32]* %stack, i32 0, i32 1
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%3 = load i32, i32* %arrayidx12
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx13 = getelementptr inbounds i32, i32 addrspace(1)* %out, i32 1
R600: Make sure to schedule AR register uses and defs in the same clause Reviewed-by: vljn at ovi.com llvm-svn: 183294
2013-06-05 11:43:06 +08:00
store i32 %3, i32 addrspace(1)* %arrayidx13
ret void
}
R600: Fix calculation of stack offset in AMDGPUFrameLowering We weren't computing structure size correctly and we were relying on the original alloca instruction to compute the offset, which isn't always reliable. Reviewed-by: Vincent Lejeune <vljn@ovi.com> llvm-svn: 183568
2013-06-08 04:52:05 +08:00
AMDGPU: Preserve alignments on new created globals Also switch to internal linkage, and include the name of the function in the name. llvm-svn: 259911
2016-02-06 03:47:23 +08:00
; OPT-LABEL: @high_alignment(
; OPT: getelementptr inbounds [256 x [8 x i32]], [256 x [8 x i32]] addrspace(3)* @high_alignment.stack, i32 0, i32 %{{[0-9]+}}
AMDGPU: Fix promote alloca pass creating huge arrays This was assuming it could use all memory before, which is a bad decision because it restricts occupancy. By default, only try to use enough space that could reduce occupancy to 7, an arbitrarily chosen limit. Based on the exist LDS usage, try to round up to the limit in the current tier instead of further hurting occupancy. This isn't ideal, because it doesn't accurately know how much space is going to be used for alignment padding. llvm-svn: 269708
2016-05-17 05:19:59 +08:00
define void @high_alignment(i32 addrspace(1)* nocapture %out, i32 addrspace(1)* nocapture %in) #0 {
AMDGPU: Preserve alignments on new created globals Also switch to internal linkage, and include the name of the function in the name. llvm-svn: 259911
2016-02-06 03:47:23 +08:00
entry:
%stack = alloca [8 x i32], align 16
%0 = load i32, i32 addrspace(1)* %in, align 4
%arrayidx1 = getelementptr inbounds [8 x i32], [8 x i32]* %stack, i32 0, i32 %0
store i32 4, i32* %arrayidx1, align 4
%arrayidx2 = getelementptr inbounds i32, i32 addrspace(1)* %in, i32 1
%1 = load i32, i32 addrspace(1)* %arrayidx2, align 4
%arrayidx3 = getelementptr inbounds [8 x i32], [8 x i32]* %stack, i32 0, i32 %1
store i32 5, i32* %arrayidx3, align 4
%arrayidx10 = getelementptr inbounds [8 x i32], [8 x i32]* %stack, i32 0, i32 0
%2 = load i32, i32* %arrayidx10, align 4
store i32 %2, i32 addrspace(1)* %out, align 4
%arrayidx12 = getelementptr inbounds [8 x i32], [8 x i32]* %stack, i32 0, i32 1
%3 = load i32, i32* %arrayidx12
%arrayidx13 = getelementptr inbounds i32, i32 addrspace(1)* %out, i32 1
store i32 %3, i32 addrspace(1)* %arrayidx13
ret void
}
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
; FUNC-LABEL: {{^}}no_replace_inbounds_gep:
; OPT-LABEL: @no_replace_inbounds_gep(
; OPT: alloca [5 x i32]
; SI-NOT: ds_write
AMDGPU: Fix promote alloca pass creating huge arrays This was assuming it could use all memory before, which is a bad decision because it restricts occupancy. By default, only try to use enough space that could reduce occupancy to 7, an arbitrarily chosen limit. Based on the exist LDS usage, try to round up to the limit in the current tier instead of further hurting occupancy. This isn't ideal, because it doesn't accurately know how much space is going to be used for alignment padding. llvm-svn: 269708
2016-05-17 05:19:59 +08:00
define void @no_replace_inbounds_gep(i32 addrspace(1)* nocapture %out, i32 addrspace(1)* nocapture %in) #0 {
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
entry:
%stack = alloca [5 x i32], align 4
%0 = load i32, i32 addrspace(1)* %in, align 4
%arrayidx1 = getelementptr [5 x i32], [5 x i32]* %stack, i32 0, i32 %0
store i32 4, i32* %arrayidx1, align 4
%arrayidx2 = getelementptr inbounds i32, i32 addrspace(1)* %in, i32 1
%1 = load i32, i32 addrspace(1)* %arrayidx2, align 4
%arrayidx3 = getelementptr inbounds [5 x i32], [5 x i32]* %stack, i32 0, i32 %1
store i32 5, i32* %arrayidx3, align 4
%arrayidx10 = getelementptr inbounds [5 x i32], [5 x i32]* %stack, i32 0, i32 0
%2 = load i32, i32* %arrayidx10, align 4
store i32 %2, i32 addrspace(1)* %out, align 4
%arrayidx12 = getelementptr inbounds [5 x i32], [5 x i32]* %stack, i32 0, i32 1
%3 = load i32, i32* %arrayidx12
%arrayidx13 = getelementptr inbounds i32, i32 addrspace(1)* %out, i32 1
store i32 %3, i32 addrspace(1)* %arrayidx13
ret void
}
R600: Fix calculation of stack offset in AMDGPUFrameLowering We weren't computing structure size correctly and we were relying on the original alloca instruction to compute the offset, which isn't always reliable. Reviewed-by: Vincent Lejeune <vljn@ovi.com> llvm-svn: 183568
2013-06-08 04:52:05 +08:00
; This test checks that the stack offset is calculated correctly for structs.
; All register loads/stores should be optimized away, so there shouldn't be
; any MOVA instructions.
;
; XXX: This generated code has unnecessary MOVs, we should be able to optimize
; this.
R600: Call EmitFunctionHeader() in the AsmPrinter to populate the ELF symbol table llvm-svn: 218776
2014-10-02 01:15:17 +08:00
; FUNC-LABEL: {{^}}multiple_structs:
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
; OPT-LABEL: @multiple_structs(
R600: Run private-memory test with and without alloca promote The unpromoted path still needs to be tested since we can't always promote to using LDS. llvm-svn: 212894
2014-07-13 10:18:06 +08:00
; R600-NOT: MOVA_INT
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td llvm-svn: 221350
2014-11-05 22:50:53 +08:00
; SI-NOT: v_movrel
; SI-NOT: v_movrel
R600: Fix calculation of stack offset in AMDGPUFrameLowering We weren't computing structure size correctly and we were relying on the original alloca instruction to compute the offset, which isn't always reliable. Reviewed-by: Vincent Lejeune <vljn@ovi.com> llvm-svn: 183568
2013-06-08 04:52:05 +08:00
%struct.point = type { i32, i32 }
AMDGPU: Fix promote alloca pass creating huge arrays This was assuming it could use all memory before, which is a bad decision because it restricts occupancy. By default, only try to use enough space that could reduce occupancy to 7, an arbitrarily chosen limit. Based on the exist LDS usage, try to round up to the limit in the current tier instead of further hurting occupancy. This isn't ideal, because it doesn't accurately know how much space is going to be used for alignment padding. llvm-svn: 269708
2016-05-17 05:19:59 +08:00
define void @multiple_structs(i32 addrspace(1)* %out) #0 {
R600: Fix calculation of stack offset in AMDGPUFrameLowering We weren't computing structure size correctly and we were relying on the original alloca instruction to compute the offset, which isn't always reliable. Reviewed-by: Vincent Lejeune <vljn@ovi.com> llvm-svn: 183568
2013-06-08 04:52:05 +08:00
entry:
%a = alloca %struct.point
%b = alloca %struct.point
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%a.x.ptr = getelementptr %struct.point, %struct.point* %a, i32 0, i32 0
%a.y.ptr = getelementptr %struct.point, %struct.point* %a, i32 0, i32 1
%b.x.ptr = getelementptr %struct.point, %struct.point* %b, i32 0, i32 0
%b.y.ptr = getelementptr %struct.point, %struct.point* %b, i32 0, i32 1
R600: Fix calculation of stack offset in AMDGPUFrameLowering We weren't computing structure size correctly and we were relying on the original alloca instruction to compute the offset, which isn't always reliable. Reviewed-by: Vincent Lejeune <vljn@ovi.com> llvm-svn: 183568
2013-06-08 04:52:05 +08:00
store i32 0, i32* %a.x.ptr
store i32 1, i32* %a.y.ptr
store i32 2, i32* %b.x.ptr
store i32 3, i32* %b.y.ptr
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%a.indirect.ptr = getelementptr %struct.point, %struct.point* %a, i32 0, i32 0
%b.indirect.ptr = getelementptr %struct.point, %struct.point* %b, i32 0, i32 0
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%a.indirect = load i32, i32* %a.indirect.ptr
%b.indirect = load i32, i32* %b.indirect.ptr
R600: Fix calculation of stack offset in AMDGPUFrameLowering We weren't computing structure size correctly and we were relying on the original alloca instruction to compute the offset, which isn't always reliable. Reviewed-by: Vincent Lejeune <vljn@ovi.com> llvm-svn: 183568
2013-06-08 04:52:05 +08:00
%0 = add i32 %a.indirect, %b.indirect
store i32 %0, i32 addrspace(1)* %out
ret void
}
R600: Simplify handling of private address space The AMDGPUIndirectAddressing pass was previously responsible for lowering private loads and stores to indirect addressing instructions. However, this pass was buggy and way too complicated. The only advantage it had over the new simplified code was that it saved one instruction per direct write to private memory. This optimization likely has a minimal impact on performance, and we may be able to duplicate it using some other transformation. For the private address space, we now: 1. Lower private loads/store to Register(Load|Store) instructions 2. Reserve part of the register file as 'private memory' 3. After regalloc lower the Register(Load|Store) instructions to MOV instructions that use indirect addressing. llvm-svn: 193179
2013-10-23 02:19:10 +08:00
; Test direct access of a private array inside a loop. The private array
; loads and stores should be lowered to copies, so there shouldn't be any
; MOVA instructions.
R600: Call EmitFunctionHeader() in the AsmPrinter to populate the ELF symbol table llvm-svn: 218776
2014-10-02 01:15:17 +08:00
; FUNC-LABEL: {{^}}direct_loop:
R600: Run private-memory test with and without alloca promote The unpromoted path still needs to be tested since we can't always promote to using LDS. llvm-svn: 212894
2014-07-13 10:18:06 +08:00
; R600-NOT: MOVA_INT
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td llvm-svn: 221350
2014-11-05 22:50:53 +08:00
; SI-NOT: v_movrel
R600: Simplify handling of private address space The AMDGPUIndirectAddressing pass was previously responsible for lowering private loads and stores to indirect addressing instructions. However, this pass was buggy and way too complicated. The only advantage it had over the new simplified code was that it saved one instruction per direct write to private memory. This optimization likely has a minimal impact on performance, and we may be able to duplicate it using some other transformation. For the private address space, we now: 1. Lower private loads/store to Register(Load|Store) instructions 2. Reserve part of the register file as 'private memory' 3. After regalloc lower the Register(Load|Store) instructions to MOV instructions that use indirect addressing. llvm-svn: 193179
2013-10-23 02:19:10 +08:00
AMDGPU: Fix promote alloca pass creating huge arrays This was assuming it could use all memory before, which is a bad decision because it restricts occupancy. By default, only try to use enough space that could reduce occupancy to 7, an arbitrarily chosen limit. Based on the exist LDS usage, try to round up to the limit in the current tier instead of further hurting occupancy. This isn't ideal, because it doesn't accurately know how much space is going to be used for alignment padding. llvm-svn: 269708
2016-05-17 05:19:59 +08:00
define void @direct_loop(i32 addrspace(1)* %out, i32 addrspace(1)* %in) #0 {
R600: Simplify handling of private address space The AMDGPUIndirectAddressing pass was previously responsible for lowering private loads and stores to indirect addressing instructions. However, this pass was buggy and way too complicated. The only advantage it had over the new simplified code was that it saved one instruction per direct write to private memory. This optimization likely has a minimal impact on performance, and we may be able to duplicate it using some other transformation. For the private address space, we now: 1. Lower private loads/store to Register(Load|Store) instructions 2. Reserve part of the register file as 'private memory' 3. After regalloc lower the Register(Load|Store) instructions to MOV instructions that use indirect addressing. llvm-svn: 193179
2013-10-23 02:19:10 +08:00
entry:
%prv_array_const = alloca [2 x i32]
%prv_array = alloca [2 x i32]
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%a = load i32, i32 addrspace(1)* %in
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
%b_src_ptr = getelementptr inbounds i32, i32 addrspace(1)* %in, i32 1
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%b = load i32, i32 addrspace(1)* %b_src_ptr
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
%a_dst_ptr = getelementptr inbounds [2 x i32], [2 x i32]* %prv_array_const, i32 0, i32 0
R600: Simplify handling of private address space The AMDGPUIndirectAddressing pass was previously responsible for lowering private loads and stores to indirect addressing instructions. However, this pass was buggy and way too complicated. The only advantage it had over the new simplified code was that it saved one instruction per direct write to private memory. This optimization likely has a minimal impact on performance, and we may be able to duplicate it using some other transformation. For the private address space, we now: 1. Lower private loads/store to Register(Load|Store) instructions 2. Reserve part of the register file as 'private memory' 3. After regalloc lower the Register(Load|Store) instructions to MOV instructions that use indirect addressing. llvm-svn: 193179
2013-10-23 02:19:10 +08:00
store i32 %a, i32* %a_dst_ptr
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
%b_dst_ptr = getelementptr inbounds [2 x i32], [2 x i32]* %prv_array_const, i32 0, i32 1
R600: Simplify handling of private address space The AMDGPUIndirectAddressing pass was previously responsible for lowering private loads and stores to indirect addressing instructions. However, this pass was buggy and way too complicated. The only advantage it had over the new simplified code was that it saved one instruction per direct write to private memory. This optimization likely has a minimal impact on performance, and we may be able to duplicate it using some other transformation. For the private address space, we now: 1. Lower private loads/store to Register(Load|Store) instructions 2. Reserve part of the register file as 'private memory' 3. After regalloc lower the Register(Load|Store) instructions to MOV instructions that use indirect addressing. llvm-svn: 193179
2013-10-23 02:19:10 +08:00
store i32 %b, i32* %b_dst_ptr
br label %for.body
for.body:
%inc = phi i32 [0, %entry], [%count, %for.body]
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
%x_ptr = getelementptr inbounds [2 x i32], [2 x i32]* %prv_array_const, i32 0, i32 0
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%x = load i32, i32* %x_ptr
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
%y_ptr = getelementptr inbounds [2 x i32], [2 x i32]* %prv_array, i32 0, i32 0
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%y = load i32, i32* %y_ptr
R600: Simplify handling of private address space The AMDGPUIndirectAddressing pass was previously responsible for lowering private loads and stores to indirect addressing instructions. However, this pass was buggy and way too complicated. The only advantage it had over the new simplified code was that it saved one instruction per direct write to private memory. This optimization likely has a minimal impact on performance, and we may be able to duplicate it using some other transformation. For the private address space, we now: 1. Lower private loads/store to Register(Load|Store) instructions 2. Reserve part of the register file as 'private memory' 3. After regalloc lower the Register(Load|Store) instructions to MOV instructions that use indirect addressing. llvm-svn: 193179
2013-10-23 02:19:10 +08:00
%xy = add i32 %x, %y
store i32 %xy, i32* %y_ptr
%count = add i32 %inc, 1
%done = icmp eq i32 %count, 4095
br i1 %done, label %for.end, label %for.body
for.end:
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
%value_ptr = getelementptr inbounds [2 x i32], [2 x i32]* %prv_array, i32 0, i32 0
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%value = load i32, i32* %value_ptr
R600: Simplify handling of private address space The AMDGPUIndirectAddressing pass was previously responsible for lowering private loads and stores to indirect addressing instructions. However, this pass was buggy and way too complicated. The only advantage it had over the new simplified code was that it saved one instruction per direct write to private memory. This optimization likely has a minimal impact on performance, and we may be able to duplicate it using some other transformation. For the private address space, we now: 1. Lower private loads/store to Register(Load|Store) instructions 2. Reserve part of the register file as 'private memory' 3. After regalloc lower the Register(Load|Store) instructions to MOV instructions that use indirect addressing. llvm-svn: 193179
2013-10-23 02:19:10 +08:00
store i32 %value, i32 addrspace(1)* %out
ret void
}
R600/SI: Add support for i8 and i16 private loads/stores llvm-svn: 199823
2014-01-23 03:24:14 +08:00
R600: Call EmitFunctionHeader() in the AsmPrinter to populate the ELF symbol table llvm-svn: 218776
2014-10-02 01:15:17 +08:00
; FUNC-LABEL: {{^}}short_array:
R600/SI: Add support for i8 and i16 private loads/stores llvm-svn: 199823
2014-01-23 03:24:14 +08:00
R600: Run private-memory test with and without alloca promote The unpromoted path still needs to be tested since we can't always promote to using LDS. llvm-svn: 212894
2014-07-13 10:18:06 +08:00
; R600: MOVA_INT
R600/SI: Add support for i8 and i16 private loads/stores llvm-svn: 199823
2014-01-23 03:24:14 +08:00
Reapply "AMDGPU: Don't use offen if it is 0" This reverts r283003 llvm-svn: 285203
2016-10-26 23:08:16 +08:00
; SI-PROMOTE-DAG: buffer_store_short v{{[0-9]+}}, off, s[{{[0-9]+:[0-9]+}}], s{{[0-9]+}} ; encoding: [0x00,0x00,0x68,0xe0
; SI-PROMOTE-DAG: buffer_store_short v{{[0-9]+}}, off, s[{{[0-9]+:[0-9]+}}], s{{[0-9]+}} offset:2 ; encoding: [0x02,0x00,0x68,0xe0
[DAG] Teach computeKnownBits and ComputeNumSignBits in SelectionDAG to look through EXTRACT_VECTOR_ELT. Summary: Both computeKnownBits and ComputeNumSignBits can now do a simple look-through of EXTRACT_VECTOR_ELT. It will compute the result based on the known bits (or known sign bits) for the vector that the element is extracted from. Reviewers: bogner, tstellarAMD, mkuper Subscribers: wdng, RKSimon, jyknight, llvm-commits, nhaehnle Differential Revision: https://reviews.llvm.org/D25007 llvm-svn: 283347
2016-10-06 01:40:27 +08:00
; Loaded value is 0 or 1, so sext will become zext, so we get buffer_load_ushort instead of buffer_load_sshort.
; SI-PROMOTE: buffer_load_ushort v{{[0-9]+}}, v{{[0-9]+}}, s[{{[0-9]+:[0-9]+}}], s{{[0-9]+}}
AMDGPU: Fix promote alloca pass creating huge arrays This was assuming it could use all memory before, which is a bad decision because it restricts occupancy. By default, only try to use enough space that could reduce occupancy to 7, an arbitrarily chosen limit. Based on the exist LDS usage, try to round up to the limit in the current tier instead of further hurting occupancy. This isn't ideal, because it doesn't accurately know how much space is going to be used for alignment padding. llvm-svn: 269708
2016-05-17 05:19:59 +08:00
define void @short_array(i32 addrspace(1)* %out, i32 %index) #0 {
R600/SI: Add support for i8 and i16 private loads/stores llvm-svn: 199823
2014-01-23 03:24:14 +08:00
entry:
%0 = alloca [2 x i16]
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
%1 = getelementptr inbounds [2 x i16], [2 x i16]* %0, i32 0, i32 0
%2 = getelementptr inbounds [2 x i16], [2 x i16]* %0, i32 0, i32 1
R600/SI: Add support for i8 and i16 private loads/stores llvm-svn: 199823
2014-01-23 03:24:14 +08:00
store i16 0, i16* %1
store i16 1, i16* %2
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
%3 = getelementptr inbounds [2 x i16], [2 x i16]* %0, i32 0, i32 %index
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%4 = load i16, i16* %3
R600/SI: Add support for i8 and i16 private loads/stores llvm-svn: 199823
2014-01-23 03:24:14 +08:00
%5 = sext i16 %4 to i32
store i32 %5, i32 addrspace(1)* %out
ret void
}
R600: Call EmitFunctionHeader() in the AsmPrinter to populate the ELF symbol table llvm-svn: 218776
2014-10-02 01:15:17 +08:00
; FUNC-LABEL: {{^}}char_array:
R600/SI: Add support for i8 and i16 private loads/stores llvm-svn: 199823
2014-01-23 03:24:14 +08:00
R600: Run private-memory test with and without alloca promote The unpromoted path still needs to be tested since we can't always promote to using LDS. llvm-svn: 212894
2014-07-13 10:18:06 +08:00
; R600: MOVA_INT
R600/SI: Add support for i8 and i16 private loads/stores llvm-svn: 199823
2014-01-23 03:24:14 +08:00
Reapply "AMDGPU: Don't use offen if it is 0" This reverts r283003 llvm-svn: 285203
2016-10-26 23:08:16 +08:00
; SI-PROMOTE-DAG: buffer_store_byte v{{[0-9]+}}, off, s[{{[0-9]+:[0-9]+}}], s{{[0-9]+}} ; encoding:
; SI-PROMOTE-DAG: buffer_store_byte v{{[0-9]+}}, off, s[{{[0-9]+:[0-9]+}}], s{{[0-9]+}} offset:1 ; encoding:
; SI-ALLOCA-DAG: buffer_store_byte v{{[0-9]+}}, v{{[0-9]+}}, s[{{[0-9]+:[0-9]+}}], s{{[0-9]+}} offen ; encoding: [0x00,0x10,0x60,0xe0
; SI-ALLOCA-DAG: buffer_store_byte v{{[0-9]+}}, v{{[0-9]+}}, s[{{[0-9]+:[0-9]+}}], s{{[0-9]+}} offen offset:1 ; encoding: [0x01,0x10,0x60,0xe0
AMDGPU: Fix promote alloca pass creating huge arrays This was assuming it could use all memory before, which is a bad decision because it restricts occupancy. By default, only try to use enough space that could reduce occupancy to 7, an arbitrarily chosen limit. Based on the exist LDS usage, try to round up to the limit in the current tier instead of further hurting occupancy. This isn't ideal, because it doesn't accurately know how much space is going to be used for alignment padding. llvm-svn: 269708
2016-05-17 05:19:59 +08:00
define void @char_array(i32 addrspace(1)* %out, i32 %index) #0 {
R600/SI: Add support for i8 and i16 private loads/stores llvm-svn: 199823
2014-01-23 03:24:14 +08:00
entry:
%0 = alloca [2 x i8]
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
%1 = getelementptr inbounds [2 x i8], [2 x i8]* %0, i32 0, i32 0
%2 = getelementptr inbounds [2 x i8], [2 x i8]* %0, i32 0, i32 1
R600/SI: Add support for i8 and i16 private loads/stores llvm-svn: 199823
2014-01-23 03:24:14 +08:00
store i8 0, i8* %1
store i8 1, i8* %2
AMDGPU: Do not promote allocas with non-inbounds GEPs If we can't assume the pointer value isn't within the bounds of the object, it seems risky to try to replace the pointer calculations. llvm-svn: 259573
2016-02-03 05:16:12 +08:00
%3 = getelementptr inbounds [2 x i8], [2 x i8]* %0, i32 0, i32 %index
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%4 = load i8, i8* %3
R600/SI: Add support for i8 and i16 private loads/stores llvm-svn: 199823
2014-01-23 03:24:14 +08:00
%5 = sext i8 %4 to i32
store i32 %5, i32 addrspace(1)* %out
ret void
}
R600: Begin private memory at the second GPR. This way private memory does not over-write work group information stored in GPRs 0 and 1. llvm-svn: 199824
2014-01-23 03:24:19 +08:00
R600: Take alignment into account when calculating the stack offset llvm-svn: 199826
2014-01-23 03:24:23 +08:00
; Test that two stack objects are not stored in the same register
; The second stack object should be in T3.X
R600: Call EmitFunctionHeader() in the AsmPrinter to populate the ELF symbol table llvm-svn: 218776
2014-10-02 01:15:17 +08:00
; FUNC-LABEL: {{^}}no_overlap:
Reapply "AMDGPU: Don't use offen if it is 0" This reverts r283003 llvm-svn: 285203
2016-10-26 23:08:16 +08:00
; R600-CHECK: MOV
; R600-CHECK: [[CHAN:[XYZW]]]+
R600: Run private-memory test with and without alloca promote The unpromoted path still needs to be tested since we can't always promote to using LDS. llvm-svn: 212894
2014-07-13 10:18:06 +08:00
; R600-NOT: [[CHAN]]+
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td llvm-svn: 221350
2014-11-05 22:50:53 +08:00
; SI: v_mov_b32_e32 v3
AMDGPU: Fix promote alloca pass creating huge arrays This was assuming it could use all memory before, which is a bad decision because it restricts occupancy. By default, only try to use enough space that could reduce occupancy to 7, an arbitrarily chosen limit. Based on the exist LDS usage, try to round up to the limit in the current tier instead of further hurting occupancy. This isn't ideal, because it doesn't accurately know how much space is going to be used for alignment padding. llvm-svn: 269708
2016-05-17 05:19:59 +08:00
define void @no_overlap(i32 addrspace(1)* %out, i32 %in) #0 {
R600: Take alignment into account when calculating the stack offset llvm-svn: 199826
2014-01-23 03:24:23 +08:00
entry:
%0 = alloca [3 x i8], align 1
%1 = alloca [2 x i8], align 1
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%2 = getelementptr [3 x i8], [3 x i8]* %0, i32 0, i32 0
%3 = getelementptr [3 x i8], [3 x i8]* %0, i32 0, i32 1
%4 = getelementptr [3 x i8], [3 x i8]* %0, i32 0, i32 2
%5 = getelementptr [2 x i8], [2 x i8]* %1, i32 0, i32 0
%6 = getelementptr [2 x i8], [2 x i8]* %1, i32 0, i32 1
R600: Take alignment into account when calculating the stack offset llvm-svn: 199826
2014-01-23 03:24:23 +08:00
store i8 0, i8* %2
store i8 1, i8* %3
store i8 2, i8* %4
store i8 1, i8* %5
store i8 0, i8* %6
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%7 = getelementptr [3 x i8], [3 x i8]* %0, i32 0, i32 %in
%8 = getelementptr [2 x i8], [2 x i8]* %1, i32 0, i32 %in
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%9 = load i8, i8* %7
%10 = load i8, i8* %8
R600: Take alignment into account when calculating the stack offset llvm-svn: 199826
2014-01-23 03:24:23 +08:00
%11 = add i8 %9, %10
%12 = sext i8 %11 to i32
store i32 %12, i32 addrspace(1)* %out
ret void
}
AMDGPU: Fix promote alloca pass creating huge arrays This was assuming it could use all memory before, which is a bad decision because it restricts occupancy. By default, only try to use enough space that could reduce occupancy to 7, an arbitrarily chosen limit. Based on the exist LDS usage, try to round up to the limit in the current tier instead of further hurting occupancy. This isn't ideal, because it doesn't accurately know how much space is going to be used for alignment padding. llvm-svn: 269708
2016-05-17 05:19:59 +08:00
define void @char_array_array(i32 addrspace(1)* %out, i32 %index) #0 {
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
entry:
%alloca = alloca [2 x [2 x i8]]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep0 = getelementptr [2 x [2 x i8]], [2 x [2 x i8]]* %alloca, i32 0, i32 0, i32 0
%gep1 = getelementptr [2 x [2 x i8]], [2 x [2 x i8]]* %alloca, i32 0, i32 0, i32 1
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
store i8 0, i8* %gep0
store i8 1, i8* %gep1
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep2 = getelementptr [2 x [2 x i8]], [2 x [2 x i8]]* %alloca, i32 0, i32 0, i32 %index
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%load = load i8, i8* %gep2
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
%sext = sext i8 %load to i32
store i32 %sext, i32 addrspace(1)* %out
ret void
}
R600: Take alignment into account when calculating the stack offset llvm-svn: 199826
2014-01-23 03:24:23 +08:00
AMDGPU: Fix promote alloca pass creating huge arrays This was assuming it could use all memory before, which is a bad decision because it restricts occupancy. By default, only try to use enough space that could reduce occupancy to 7, an arbitrarily chosen limit. Based on the exist LDS usage, try to round up to the limit in the current tier instead of further hurting occupancy. This isn't ideal, because it doesn't accurately know how much space is going to be used for alignment padding. llvm-svn: 269708
2016-05-17 05:19:59 +08:00
define void @i32_array_array(i32 addrspace(1)* %out, i32 %index) #0 {
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
entry:
%alloca = alloca [2 x [2 x i32]]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep0 = getelementptr [2 x [2 x i32]], [2 x [2 x i32]]* %alloca, i32 0, i32 0, i32 0
%gep1 = getelementptr [2 x [2 x i32]], [2 x [2 x i32]]* %alloca, i32 0, i32 0, i32 1
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
store i32 0, i32* %gep0
store i32 1, i32* %gep1
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep2 = getelementptr [2 x [2 x i32]], [2 x [2 x i32]]* %alloca, i32 0, i32 0, i32 %index
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%load = load i32, i32* %gep2
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
store i32 %load, i32 addrspace(1)* %out
ret void
}
R600: Take alignment into account when calculating the stack offset llvm-svn: 199826
2014-01-23 03:24:23 +08:00
AMDGPU: Fix promote alloca pass creating huge arrays This was assuming it could use all memory before, which is a bad decision because it restricts occupancy. By default, only try to use enough space that could reduce occupancy to 7, an arbitrarily chosen limit. Based on the exist LDS usage, try to round up to the limit in the current tier instead of further hurting occupancy. This isn't ideal, because it doesn't accurately know how much space is going to be used for alignment padding. llvm-svn: 269708
2016-05-17 05:19:59 +08:00
define void @i64_array_array(i64 addrspace(1)* %out, i32 %index) #0 {
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
entry:
%alloca = alloca [2 x [2 x i64]]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep0 = getelementptr [2 x [2 x i64]], [2 x [2 x i64]]* %alloca, i32 0, i32 0, i32 0
%gep1 = getelementptr [2 x [2 x i64]], [2 x [2 x i64]]* %alloca, i32 0, i32 0, i32 1
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
store i64 0, i64* %gep0
store i64 1, i64* %gep1
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep2 = getelementptr [2 x [2 x i64]], [2 x [2 x i64]]* %alloca, i32 0, i32 0, i32 %index
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%load = load i64, i64* %gep2
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
store i64 %load, i64 addrspace(1)* %out
ret void
}
%struct.pair32 = type { i32, i32 }
AMDGPU: Fix promote alloca pass creating huge arrays This was assuming it could use all memory before, which is a bad decision because it restricts occupancy. By default, only try to use enough space that could reduce occupancy to 7, an arbitrarily chosen limit. Based on the exist LDS usage, try to round up to the limit in the current tier instead of further hurting occupancy. This isn't ideal, because it doesn't accurately know how much space is going to be used for alignment padding. llvm-svn: 269708
2016-05-17 05:19:59 +08:00
define void @struct_array_array(i32 addrspace(1)* %out, i32 %index) #0 {
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
entry:
%alloca = alloca [2 x [2 x %struct.pair32]]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep0 = getelementptr [2 x [2 x %struct.pair32]], [2 x [2 x %struct.pair32]]* %alloca, i32 0, i32 0, i32 0, i32 1
%gep1 = getelementptr [2 x [2 x %struct.pair32]], [2 x [2 x %struct.pair32]]* %alloca, i32 0, i32 0, i32 1, i32 1
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
store i32 0, i32* %gep0
store i32 1, i32* %gep1
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep2 = getelementptr [2 x [2 x %struct.pair32]], [2 x [2 x %struct.pair32]]* %alloca, i32 0, i32 0, i32 %index, i32 0
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%load = load i32, i32* %gep2
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
store i32 %load, i32 addrspace(1)* %out
ret void
}
AMDGPU: Fix promote alloca pass creating huge arrays This was assuming it could use all memory before, which is a bad decision because it restricts occupancy. By default, only try to use enough space that could reduce occupancy to 7, an arbitrarily chosen limit. Based on the exist LDS usage, try to round up to the limit in the current tier instead of further hurting occupancy. This isn't ideal, because it doesn't accurately know how much space is going to be used for alignment padding. llvm-svn: 269708
2016-05-17 05:19:59 +08:00
define void @struct_pair32_array(i32 addrspace(1)* %out, i32 %index) #0 {
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
entry:
%alloca = alloca [2 x %struct.pair32]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep0 = getelementptr [2 x %struct.pair32], [2 x %struct.pair32]* %alloca, i32 0, i32 0, i32 1
%gep1 = getelementptr [2 x %struct.pair32], [2 x %struct.pair32]* %alloca, i32 0, i32 1, i32 0
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
store i32 0, i32* %gep0
store i32 1, i32* %gep1
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep2 = getelementptr [2 x %struct.pair32], [2 x %struct.pair32]* %alloca, i32 0, i32 %index, i32 0
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%load = load i32, i32* %gep2
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
store i32 %load, i32 addrspace(1)* %out
ret void
R600: Don't crash on unhandled instruction in promote alloca llvm-svn: 211906
2014-06-28 00:52:49 +08:00
}
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
R600: Don't crash on unhandled instruction in promote alloca llvm-svn: 211906
2014-06-28 00:52:49 +08:00
define void @select_private(i32 addrspace(1)* %out, i32 %in) nounwind {
entry:
%tmp = alloca [2 x i32]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%tmp1 = getelementptr [2 x i32], [2 x i32]* %tmp, i32 0, i32 0
%tmp2 = getelementptr [2 x i32], [2 x i32]* %tmp, i32 0, i32 1
R600: Don't crash on unhandled instruction in promote alloca llvm-svn: 211906
2014-06-28 00:52:49 +08:00
store i32 0, i32* %tmp1
store i32 1, i32* %tmp2
%cmp = icmp eq i32 %in, 0
%sel = select i1 %cmp, i32* %tmp1, i32* %tmp2
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%load = load i32, i32* %sel
R600: Don't crash on unhandled instruction in promote alloca llvm-svn: 211906
2014-06-28 00:52:49 +08:00
store i32 %load, i32 addrspace(1)* %out
ret void
R600: Add some testcases for promote alloca pass. More complicated GEPs are skipped. Add some tests to actually stress this skipping. llvm-svn: 211859
2014-06-27 11:55:55 +08:00
}
R600: Don't crash on unhandled instruction in promote alloca llvm-svn: 211906
2014-06-28 00:52:49 +08:00
R600: Don't promote allocas when one of the users is a ptrtoint instruction We need to figure out how to track ptrtoint values all the way until result is converted back to a pointer in order to correctly rewrite the pointer type. llvm-svn: 220997
2014-11-01 04:52:04 +08:00
; AMDGPUPromoteAlloca does not know how to handle ptrtoint. When it
; finds one, it should stop trying to promote.
; FUNC-LABEL: ptrtoint:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td llvm-svn: 221350
2014-11-05 22:50:53 +08:00
; SI-NOT: ds_write
; SI: buffer_store_dword v{{[0-9]+}}, v{{[0-9]+}}, s[{{[0-9]+:[0-9]+}}], s{{[0-9]+}} offen
AMDGPU: Remove SignBitIsZero for mubuf scratch offsets These instructions do not have the same negative base address problem that DS instructions do on SI. llvm-svn: 263964
2016-03-22 02:02:18 +08:00
; SI: buffer_load_dword v{{[0-9]+}}, v{{[0-9]+}}, s[{{[0-9]+:[0-9]+}}], s{{[0-9]+}} offen offset:5 ;
AMDGPU: Fix promote alloca pass creating huge arrays This was assuming it could use all memory before, which is a bad decision because it restricts occupancy. By default, only try to use enough space that could reduce occupancy to 7, an arbitrarily chosen limit. Based on the exist LDS usage, try to round up to the limit in the current tier instead of further hurting occupancy. This isn't ideal, because it doesn't accurately know how much space is going to be used for alignment padding. llvm-svn: 269708
2016-05-17 05:19:59 +08:00
define void @ptrtoint(i32 addrspace(1)* %out, i32 %a, i32 %b) #0 {
R600: Don't promote allocas when one of the users is a ptrtoint instruction We need to figure out how to track ptrtoint values all the way until result is converted back to a pointer in order to correctly rewrite the pointer type. llvm-svn: 220997
2014-11-01 04:52:04 +08:00
%alloca = alloca [16 x i32]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%tmp0 = getelementptr [16 x i32], [16 x i32]* %alloca, i32 0, i32 %a
R600: Don't promote allocas when one of the users is a ptrtoint instruction We need to figure out how to track ptrtoint values all the way until result is converted back to a pointer in order to correctly rewrite the pointer type. llvm-svn: 220997
2014-11-01 04:52:04 +08:00
store i32 5, i32* %tmp0
%tmp1 = ptrtoint [16 x i32]* %alloca to i32
%tmp2 = add i32 %tmp1, 5
%tmp3 = inttoptr i32 %tmp2 to i32*
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%tmp4 = getelementptr i32, i32* %tmp3, i32 %b
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%tmp5 = load i32, i32* %tmp4
R600: Don't promote allocas when one of the users is a ptrtoint instruction We need to figure out how to track ptrtoint values all the way until result is converted back to a pointer in order to correctly rewrite the pointer type. llvm-svn: 220997
2014-11-01 04:52:04 +08:00
store i32 %tmp5, i32 addrspace(1)* %out
ret void
}
AMDGPU: Fix emitting invalid workitem intrinsics for HSA The AMDGPUPromoteAlloca pass was emitting the read.local.size calls, which with HSA was incorrectly selected to reading from the offset mesa uses off of the kernarg pointer. Error on intrinsics which aren't supported by HSA, and start emitting the correct IR to read the workgroup size out of the dispatch pointer. Also initialize the pass so it can be tested with opt, and start moving towards not depending on the subtarget as an argument. Start emitting errors for the intrinsics not handled with HSA. llvm-svn: 259297
2016-01-30 13:19:45 +08:00
AMDGPU: Fix promote alloca for pointer loads If the load has a pointer type, we don't want to change its type. llvm-svn: 270000
2016-05-19 07:20:24 +08:00
; OPT-LABEL: @pointer_typed_alloca(
; OPT: getelementptr inbounds [256 x i32 addrspace(1)*], [256 x i32 addrspace(1)*] addrspace(3)* @pointer_typed_alloca.A.addr, i32 0, i32 %{{[0-9]+}}
; OPT: load i32 addrspace(1)*, i32 addrspace(1)* addrspace(3)* %{{[0-9]+}}, align 4
define void @pointer_typed_alloca(i32 addrspace(1)* %A) {
entry:
%A.addr = alloca i32 addrspace(1)*, align 4
store i32 addrspace(1)* %A, i32 addrspace(1)** %A.addr, align 4
%ld0 = load i32 addrspace(1)*, i32 addrspace(1)** %A.addr, align 4
%arrayidx = getelementptr inbounds i32, i32 addrspace(1)* %ld0, i32 0
store i32 1, i32 addrspace(1)* %arrayidx, align 4
%ld1 = load i32 addrspace(1)*, i32 addrspace(1)** %A.addr, align 4
%arrayidx1 = getelementptr inbounds i32, i32 addrspace(1)* %ld1, i32 1
store i32 2, i32 addrspace(1)* %arrayidx1, align 4
%ld2 = load i32 addrspace(1)*, i32 addrspace(1)** %A.addr, align 4
%arrayidx2 = getelementptr inbounds i32, i32 addrspace(1)* %ld2, i32 2
store i32 3, i32 addrspace(1)* %arrayidx2, align 4
ret void
}
AMDGPU/R600: Use correct number of vector elements when lowering private loads Reviewer: tstellardAMD, arsenm Subscribers: arsenm, kzhuravl, llvm-commits Differential Revision: http://reviews.llvm.org/D20032 llvm-svn: 269725
2016-05-17 07:56:32 +08:00
; FUNC-LABEL: v16i32_stack:
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
define void @v16i32_stack(<16 x i32> addrspace(1)* %out, i32 %a) {
%alloca = alloca [2 x <16 x i32>]
%tmp0 = getelementptr [2 x <16 x i32>], [2 x <16 x i32>]* %alloca, i32 0, i32 %a
%tmp5 = load <16 x i32>, <16 x i32>* %tmp0
store <16 x i32> %tmp5, <16 x i32> addrspace(1)* %out
ret void
}
; FUNC-LABEL: v16float_stack:
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; R600: MOVA_INT
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
; SI: buffer_load_dword
define void @v16float_stack(<16 x float> addrspace(1)* %out, i32 %a) {
%alloca = alloca [2 x <16 x float>]
%tmp0 = getelementptr [2 x <16 x float>], [2 x <16 x float>]* %alloca, i32 0, i32 %a
%tmp5 = load <16 x float>, <16 x float>* %tmp0
store <16 x float> %tmp5, <16 x float> addrspace(1)* %out
ret void
}
; FUNC-LABEL: v2float_stack:
; R600: MOVA_INT
; R600: MOVA_INT
; SI: buffer_load_dword
; SI: buffer_load_dword
define void @v2float_stack(<2 x float> addrspace(1)* %out, i32 %a) {
%alloca = alloca [16 x <2 x float>]
%tmp0 = getelementptr [16 x <2 x float>], [16 x <2 x float>]* %alloca, i32 0, i32 %a
%tmp5 = load <2 x float>, <2 x float>* %tmp0
store <2 x float> %tmp5, <2 x float> addrspace(1)* %out
ret void
}
AMDGPU: Remove dead check in AMDGPUPromoteAlloca This is currently only called with GEP users. A direct alloca would only happen with current typed pointers for arrays which are a perverse case. Also fix crashes on 0 x and 1 x arrays. llvm-svn: 275869
2016-07-19 02:34:53 +08:00
; OPT-LABEL: @direct_alloca_read_0xi32(
; OPT: store [0 x i32] undef, [0 x i32] addrspace(3)*
; OPT: load [0 x i32], [0 x i32] addrspace(3)*
define void @direct_alloca_read_0xi32([0 x i32] addrspace(1)* %out, i32 %index) {
entry:
%tmp = alloca [0 x i32]
store [0 x i32] [], [0 x i32]* %tmp
%load = load [0 x i32], [0 x i32]* %tmp
store [0 x i32] %load, [0 x i32] addrspace(1)* %out
ret void
}
; OPT-LABEL: @direct_alloca_read_1xi32(
; OPT: store [1 x i32] zeroinitializer, [1 x i32] addrspace(3)*
; OPT: load [1 x i32], [1 x i32] addrspace(3)*
define void @direct_alloca_read_1xi32([1 x i32] addrspace(1)* %out, i32 %index) {
entry:
%tmp = alloca [1 x i32]
store [1 x i32] [i32 0], [1 x i32]* %tmp
%load = load [1 x i32], [1 x i32]* %tmp
store [1 x i32] %load, [1 x i32] addrspace(1)* %out
ret void
}
[AMDGPU] Wave and register controls - Implemented amdgpu-flat-work-group-size attribute - Implemented amdgpu-num-active-waves-per-eu attribute - Implemented amdgpu-num-sgpr attribute - Implemented amdgpu-num-vgpr attribute - Dynamic LDS constraints are in a separate patch Patch by Tom Stellard and Konstantin Zhuravlyov Differential Revision: https://reviews.llvm.org/D21562 llvm-svn: 280747
2016-09-07 04:22:28 +08:00
attributes #0 = { nounwind "amdgpu-waves-per-eu"="1,2" }
AMDGPU: Remove dead check in AMDGPUPromoteAlloca This is currently only called with GEP users. A direct alloca would only happen with current typed pointers for arrays which are a perverse case. Also fix crashes on 0 x and 1 x arrays. llvm-svn: 275869
2016-07-19 02:34:53 +08:00
; HSAOPT: !0 = !{}
; HSAOPT: !1 = !{i32 0, i32 2048}
; NOHSAOPT: !0 = !{i32 0, i32 2048}