llvm-project/llvm/test/CodeGen/AMDGPU/smrd.ll

166 lines
8.1 KiB
LLVM
Raw Normal View History

; RUN: llc < %s -march=amdgcn -mcpu=SI -show-mc-encoding -verify-machineinstrs | FileCheck --check-prefix=SI --check-prefix=GCN --check-prefix=SIVI %s
; RUN: llc < %s -march=amdgcn -mcpu=bonaire -show-mc-encoding -verify-machineinstrs | FileCheck --check-prefix=CI --check-prefix=GCN %s
; RUN: llc < %s -march=amdgcn -mcpu=tonga -show-mc-encoding -verify-machineinstrs | FileCheck --check-prefix=VI --check-prefix=GCN --check-prefix=SIVI %s
; SMRD load with an immediate offset.
; GCN-LABEL: {{^}}smrd0:
; SICI: s_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0x1 ; encoding: [0x01
; VI: s_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0x4
define void @smrd0(i32 addrspace(1)* %out, i32 addrspace(2)* %ptr) {
entry:
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%0 = getelementptr i32, i32 addrspace(2)* %ptr, i64 1
%1 = load i32, i32 addrspace(2)* %0
store i32 %1, i32 addrspace(1)* %out
ret void
}
; SMRD load with the largest possible immediate offset.
; GCN-LABEL: {{^}}smrd1:
; SICI: s_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0xff ; encoding: [0xff,0x{{[0-9]+[137]}}
; VI: s_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0x3fc
define void @smrd1(i32 addrspace(1)* %out, i32 addrspace(2)* %ptr) {
entry:
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%0 = getelementptr i32, i32 addrspace(2)* %ptr, i64 255
%1 = load i32, i32 addrspace(2)* %0
store i32 %1, i32 addrspace(1)* %out
ret void
}
; SMRD load with an offset greater than the largest possible immediate.
; GCN-LABEL: {{^}}smrd2:
; SI: s_movk_i32 s[[OFFSET:[0-9]]], 0x400
; SI: s_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], s[[OFFSET]] ; encoding: [0x0[[OFFSET]]
; CI: s_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0x100
; VI: s_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0x400
; GCN: s_endpgm
define void @smrd2(i32 addrspace(1)* %out, i32 addrspace(2)* %ptr) {
entry:
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%0 = getelementptr i32, i32 addrspace(2)* %ptr, i64 256
%1 = load i32, i32 addrspace(2)* %0
store i32 %1, i32 addrspace(1)* %out
ret void
}
; SMRD load with a 64-bit offset
; GCN-LABEL: {{^}}smrd3:
; FIXME: There are too many copies here because we don't fold immediates
; through REG_SEQUENCE
; SI: s_load_dwordx2 s[{{[0-9]:[0-9]}}], s[{{[0-9]:[0-9]}}], 0xb ; encoding: [0x0b
; TODO: Add VI checks
; GCN: s_endpgm
define void @smrd3(i32 addrspace(1)* %out, i32 addrspace(2)* %ptr) {
entry:
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%0 = getelementptr i32, i32 addrspace(2)* %ptr, i64 4294967296 ; 2 ^ 32
%1 = load i32, i32 addrspace(2)* %0
store i32 %1, i32 addrspace(1)* %out
ret void
}
; SMRD load with the largest possible immediate offset on VI
; GCN-LABEL: {{^}}smrd4:
; SI: s_mov_b32 [[OFFSET:s[0-9]+]], 0xffffc
; SI: s_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], [[OFFSET]]
; CI: s_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0x3ffff
; VI: s_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0xffffc
define void @smrd4(i32 addrspace(1)* %out, i32 addrspace(2)* %ptr) {
entry:
%0 = getelementptr i32, i32 addrspace(2)* %ptr, i64 262143
%1 = load i32, i32 addrspace(2)* %0
store i32 %1, i32 addrspace(1)* %out
ret void
}
; SMRD load with an offset greater than the largest possible immediate on VI
; GCN-LABEL: {{^}}smrd5:
; SIVI: s_mov_b32 [[OFFSET:s[0-9]+]], 0x100000
; SIVI: s_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], [[OFFSET]]
; CI: s_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0x40000
; GCN: s_endpgm
define void @smrd5(i32 addrspace(1)* %out, i32 addrspace(2)* %ptr) {
entry:
%0 = getelementptr i32, i32 addrspace(2)* %ptr, i64 262144
%1 = load i32, i32 addrspace(2)* %0
store i32 %1, i32 addrspace(1)* %out
ret void
}
; SMRD load using the load.const intrinsic with an immediate offset
; GCN-LABEL: {{^}}smrd_load_const0:
; SICI: s_buffer_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0x4 ; encoding: [0x04
; VI: s_buffer_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0x10
define amdgpu_ps void @smrd_load_const0(<16 x i8> addrspace(2)* inreg, <16 x i8> addrspace(2)* inreg, <32 x i8> addrspace(2)* inreg, i32 inreg, <2 x i32>, <2 x i32>, <2 x i32>, <3 x i32>, <2 x i32>, <2 x i32>, <2 x i32>, float, float, float, float, float, float, float, float, float) {
main_body:
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%20 = getelementptr <16 x i8>, <16 x i8> addrspace(2)* %0, i32 0
%21 = load <16 x i8>, <16 x i8> addrspace(2)* %20
%22 = call float @llvm.SI.load.const(<16 x i8> %21, i32 16)
call void @llvm.SI.export(i32 15, i32 1, i32 1, i32 0, i32 0, float %22, float %22, float %22, float %22)
ret void
}
; SMRD load using the load.const intrinsic with the largest possible immediate
; offset.
; GCN-LABEL: {{^}}smrd_load_const1:
; SICI: s_buffer_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0xff ; encoding: [0xff
; VI: s_buffer_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0x3fc
define amdgpu_ps void @smrd_load_const1(<16 x i8> addrspace(2)* inreg, <16 x i8> addrspace(2)* inreg, <32 x i8> addrspace(2)* inreg, i32 inreg, <2 x i32>, <2 x i32>, <2 x i32>, <3 x i32>, <2 x i32>, <2 x i32>, <2 x i32>, float, float, float, float, float, float, float, float, float) {
main_body:
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%20 = getelementptr <16 x i8>, <16 x i8> addrspace(2)* %0, i32 0
%21 = load <16 x i8>, <16 x i8> addrspace(2)* %20
%22 = call float @llvm.SI.load.const(<16 x i8> %21, i32 1020)
call void @llvm.SI.export(i32 15, i32 1, i32 1, i32 0, i32 0, float %22, float %22, float %22, float %22)
ret void
}
; SMRD load using the load.const intrinsic with an offset greater than the
; largets possible immediate.
; immediate offset.
; GCN-LABEL: {{^}}smrd_load_const2:
; SI: s_movk_i32 s[[OFFSET:[0-9]]], 0x400
; SI: s_buffer_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], s[[OFFSET]] ; encoding: [0x0[[OFFSET]]
; CI: s_buffer_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0x100
; VI: s_buffer_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0x400
define amdgpu_ps void @smrd_load_const2(<16 x i8> addrspace(2)* inreg, <16 x i8> addrspace(2)* inreg, <32 x i8> addrspace(2)* inreg, i32 inreg, <2 x i32>, <2 x i32>, <2 x i32>, <3 x i32>, <2 x i32>, <2 x i32>, <2 x i32>, float, float, float, float, float, float, float, float, float) {
main_body:
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%20 = getelementptr <16 x i8>, <16 x i8> addrspace(2)* %0, i32 0
%21 = load <16 x i8>, <16 x i8> addrspace(2)* %20
%22 = call float @llvm.SI.load.const(<16 x i8> %21, i32 1024)
call void @llvm.SI.export(i32 15, i32 1, i32 1, i32 0, i32 0, float %22, float %22, float %22, float %22)
ret void
}
; SMRD load with the largest possible immediate offset on VI
; GCN-LABEL: {{^}}smrd_load_const3:
; SI: s_mov_b32 [[OFFSET:s[0-9]+]], 0xffffc
; SI: s_buffer_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], [[OFFSET]]
; CI: s_buffer_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0x3ffff
; VI: s_buffer_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0xffffc
define amdgpu_ps void @smrd_load_const3(<16 x i8> addrspace(2)* inreg, <16 x i8> addrspace(2)* inreg, <32 x i8> addrspace(2)* inreg, i32 inreg, <2 x i32>, <2 x i32>, <2 x i32>, <3 x i32>, <2 x i32>, <2 x i32>, <2 x i32>, float, float, float, float, float, float, float, float, float) {
main_body:
%20 = getelementptr <16 x i8>, <16 x i8> addrspace(2)* %0, i32 0
%21 = load <16 x i8>, <16 x i8> addrspace(2)* %20
%22 = call float @llvm.SI.load.const(<16 x i8> %21, i32 1048572)
call void @llvm.SI.export(i32 15, i32 1, i32 1, i32 0, i32 0, float %22, float %22, float %22, float %22)
ret void
}
; SMRD load with an offset greater than the largest possible immediate on VI
; GCN-LABEL: {{^}}smrd_load_const4:
; SIVI: s_mov_b32 [[OFFSET:s[0-9]+]], 0x100000
; SIVI: s_buffer_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], [[OFFSET]]
; CI: s_buffer_load_dword s{{[0-9]}}, s[{{[0-9]:[0-9]}}], 0x40000
; GCN: s_endpgm
define amdgpu_ps void @smrd_load_const4(<16 x i8> addrspace(2)* inreg, <16 x i8> addrspace(2)* inreg, <32 x i8> addrspace(2)* inreg, i32 inreg, <2 x i32>, <2 x i32>, <2 x i32>, <3 x i32>, <2 x i32>, <2 x i32>, <2 x i32>, float, float, float, float, float, float, float, float, float) {
main_body:
%20 = getelementptr <16 x i8>, <16 x i8> addrspace(2)* %0, i32 0
%21 = load <16 x i8>, <16 x i8> addrspace(2)* %20
%22 = call float @llvm.SI.load.const(<16 x i8> %21, i32 1048576)
call void @llvm.SI.export(i32 15, i32 1, i32 1, i32 0, i32 0, float %22, float %22, float %22, float %22)
ret void
}
; Function Attrs: nounwind readnone
declare float @llvm.SI.load.const(<16 x i8>, i32) #0
declare void @llvm.SI.export(i32, i32, i32, i32, i32, float, float, float, float)
attributes #0 = { nounwind readnone }