maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/Analysis/DependenceAnalysis/WeakZeroDstSIV.ll

296 lines
9.6 KiB
LLVM
Raw Normal View History

dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
; RUN: opt < %s -analyze -basicaa -da | FileCheck %s
; ModuleID = 'WeakZeroDstSIV.bc'
target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
target triple = "x86_64-apple-macosx10.6.0"
[DA] Fix direction vectors for weakZeroSrcSIV Both weakZeroSrcSIV and weakZeroDstSIV are currently giving the same direction vectors. Fix weakZeroSrcSIVtest by flipping the directions it gives. Differential Revision: https://reviews.llvm.org/D46678 llvm-svn: 333658
2018-05-31 22:55:29 +08:00
;; for (int i = 0; i < N; i++) {
;; A[i] = 1;
;; A[0] = 2;
define void @dstzero(i32* nocapture %A, i32 %N) {
entry:
%cmp6 = icmp sgt i32 %N, 0
br i1 %cmp6, label %for.body, label %for.cond.cleanup
; CHECK: da analyze - none!
; CHECK: da analyze - output [p<=|<]!
; CHECK: da analyze - consistent output [S]!
for.body: ; preds = %entry, %for.body
%i.07 = phi i32 [ %add, %for.body ], [ 0, %entry ]
%arrayidx = getelementptr inbounds i32, i32* %A, i32 %i.07
store i32 0, i32* %arrayidx, align 4
store i32 1, i32* %A, align 4
%add = add nuw nsw i32 %i.07, 1
%exitcond = icmp eq i32 %add, %N
br i1 %exitcond, label %for.cond.cleanup, label %for.body
for.cond.cleanup: ; preds = %for.body, %entry
ret void
}
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
;; for (long unsigned i = 0; i < 30; i++) {
;; A[2*i + 10] = i;
;; *B++ = A[10];
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
define void @weakzerodst0(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
br label %for.body
Modified depends() to recognize that when all levels are "=" and there's no possible loo-independent dependence, then there's no dependence. Updated all test result appropriately. llvm-svn: 168719
2012-11-28 03:12:26 +08:00
; CHECK: da analyze - none!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
; CHECK: da analyze - flow [p<=|<]!
; CHECK: da analyze - confused!
Modify depends(Src, Dst, PossiblyLoopIndependent). If the Src and Dst are the same instruction, no loop-independent dependence is possible, so we force the PossiblyLoopIndependent flag to false. The test case results are updated appropriately. llvm-svn: 168678
2012-11-27 14:41:46 +08:00
; CHECK: da analyze - consistent input [S]!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
; CHECK: da analyze - confused!
Modified depends() to recognize that when all levels are "=" and there's no possible loo-independent dependence, then there's no dependence. Updated all test result appropriately. llvm-svn: 168719
2012-11-28 03:12:26 +08:00
; CHECK: da analyze - none!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
for.body: ; preds = %entry, %for.body
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
%i.02 = phi i64 [ 0, %entry ], [ %inc, %for.body ]
%B.addr.01 = phi i32* [ %B, %entry ], [ %incdec.ptr, %for.body ]
%conv = trunc i64 %i.02 to i32
%mul = shl i64 %i.02, 1
%add = add i64 %mul, 10
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %add
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
store i32 %conv, i32* %arrayidx, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx1 = getelementptr inbounds i32, i32* %A, i64 10
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load i32, i32* %arrayidx1, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.01, i64 1
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
store i32 %0, i32* %B.addr.01, align 4
%inc = add i64 %i.02, 1
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
%exitcond = icmp ne i64 %inc, 30
br i1 %exitcond, label %for.body, label %for.end
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
for.end: ; preds = %for.body
ret void
}
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
;; for (long unsigned i = 0; i < n; i++) {
;; A[n*i + 10] = i;
;; *B++ = A[10];
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
define void @weakzerodst1(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
%cmp1 = icmp eq i64 %n, 0
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
br i1 %cmp1, label %for.end, label %for.body.preheader
Modified depends() to recognize that when all levels are "=" and there's no possible loo-independent dependence, then there's no dependence. Updated all test result appropriately. llvm-svn: 168719
2012-11-28 03:12:26 +08:00
; CHECK: da analyze - none!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
; CHECK: da analyze - flow [p<=|<]!
; CHECK: da analyze - confused!
Modify depends(Src, Dst, PossiblyLoopIndependent). If the Src and Dst are the same instruction, no loop-independent dependence is possible, so we force the PossiblyLoopIndependent flag to false. The test case results are updated appropriately. llvm-svn: 168678
2012-11-27 14:41:46 +08:00
; CHECK: da analyze - consistent input [S]!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
; CHECK: da analyze - confused!
Modified depends() to recognize that when all levels are "=" and there's no possible loo-independent dependence, then there's no dependence. Updated all test result appropriately. llvm-svn: 168719
2012-11-28 03:12:26 +08:00
; CHECK: da analyze - none!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
for.body.preheader: ; preds = %entry
br label %for.body
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
for.body: ; preds = %for.body.preheader, %for.body
%i.03 = phi i64 [ %inc, %for.body ], [ 0, %for.body.preheader ]
%B.addr.02 = phi i32* [ %incdec.ptr, %for.body ], [ %B, %for.body.preheader ]
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
%conv = trunc i64 %i.03 to i32
%mul = mul i64 %i.03, %n
%add = add i64 %mul, 10
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %add
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
store i32 %conv, i32* %arrayidx, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx1 = getelementptr inbounds i32, i32* %A, i64 10
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load i32, i32* %arrayidx1, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.02, i64 1
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
store i32 %0, i32* %B.addr.02, align 4
%inc = add i64 %i.03, 1
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
%exitcond = icmp ne i64 %inc, %n
br i1 %exitcond, label %for.body, label %for.end.loopexit
for.end.loopexit: ; preds = %for.body
br label %for.end
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
for.end: ; preds = %for.end.loopexit, %entry
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
ret void
}
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
;; for (long unsigned i = 0; i < 5; i++) {
;; A[2*i] = i;
;; *B++ = A[10];
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
define void @weakzerodst2(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
br label %for.body
Modified depends() to recognize that when all levels are "=" and there's no possible loo-independent dependence, then there's no dependence. Updated all test result appropriately. llvm-svn: 168719
2012-11-28 03:12:26 +08:00
; CHECK: da analyze - none!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
Modify depends(Src, Dst, PossiblyLoopIndependent). If the Src and Dst are the same instruction, no loop-independent dependence is possible, so we force the PossiblyLoopIndependent flag to false. The test case results are updated appropriately. llvm-svn: 168678
2012-11-27 14:41:46 +08:00
; CHECK: da analyze - consistent input [S]!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
; CHECK: da analyze - confused!
Modified depends() to recognize that when all levels are "=" and there's no possible loo-independent dependence, then there's no dependence. Updated all test result appropriately. llvm-svn: 168719
2012-11-28 03:12:26 +08:00
; CHECK: da analyze - none!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
for.body: ; preds = %entry, %for.body
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
%i.02 = phi i64 [ 0, %entry ], [ %inc, %for.body ]
%B.addr.01 = phi i32* [ %B, %entry ], [ %incdec.ptr, %for.body ]
%conv = trunc i64 %i.02 to i32
%mul = shl i64 %i.02, 1
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %mul
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
store i32 %conv, i32* %arrayidx, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx1 = getelementptr inbounds i32, i32* %A, i64 10
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load i32, i32* %arrayidx1, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.01, i64 1
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
store i32 %0, i32* %B.addr.01, align 4
%inc = add i64 %i.02, 1
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
%exitcond = icmp ne i64 %inc, 5
br i1 %exitcond, label %for.body, label %for.end
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
for.end: ; preds = %for.body
ret void
}
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
;; for (long unsigned i = 0; i < 6; i++) {
;; A[2*i] = i;
;; *B++ = A[10];
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
define void @weakzerodst3(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
br label %for.body
Modified depends() to recognize that when all levels are "=" and there's no possible loo-independent dependence, then there's no dependence. Updated all test result appropriately. llvm-svn: 168719
2012-11-28 03:12:26 +08:00
; CHECK: da analyze - none!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
; CHECK: da analyze - flow [=>p|<]!
; CHECK: da analyze - confused!
Modify depends(Src, Dst, PossiblyLoopIndependent). If the Src and Dst are the same instruction, no loop-independent dependence is possible, so we force the PossiblyLoopIndependent flag to false. The test case results are updated appropriately. llvm-svn: 168678
2012-11-27 14:41:46 +08:00
; CHECK: da analyze - consistent input [S]!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
; CHECK: da analyze - confused!
Modified depends() to recognize that when all levels are "=" and there's no possible loo-independent dependence, then there's no dependence. Updated all test result appropriately. llvm-svn: 168719
2012-11-28 03:12:26 +08:00
; CHECK: da analyze - none!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
for.body: ; preds = %entry, %for.body
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
%i.02 = phi i64 [ 0, %entry ], [ %inc, %for.body ]
%B.addr.01 = phi i32* [ %B, %entry ], [ %incdec.ptr, %for.body ]
%conv = trunc i64 %i.02 to i32
%mul = shl i64 %i.02, 1
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %mul
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
store i32 %conv, i32* %arrayidx, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx1 = getelementptr inbounds i32, i32* %A, i64 10
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load i32, i32* %arrayidx1, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.01, i64 1
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
store i32 %0, i32* %B.addr.01, align 4
%inc = add i64 %i.02, 1
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
%exitcond = icmp ne i64 %inc, 6
br i1 %exitcond, label %for.body, label %for.end
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
for.end: ; preds = %for.body
ret void
}
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
;; for (long unsigned i = 0; i < 7; i++) {
;; A[2*i] = i;
;; *B++ = A[10];
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
define void @weakzerodst4(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
br label %for.body
Modified depends() to recognize that when all levels are "=" and there's no possible loo-independent dependence, then there's no dependence. Updated all test result appropriately. llvm-svn: 168719
2012-11-28 03:12:26 +08:00
; CHECK: da analyze - none!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
; CHECK: da analyze - flow [*|<]!
; CHECK: da analyze - confused!
Modify depends(Src, Dst, PossiblyLoopIndependent). If the Src and Dst are the same instruction, no loop-independent dependence is possible, so we force the PossiblyLoopIndependent flag to false. The test case results are updated appropriately. llvm-svn: 168678
2012-11-27 14:41:46 +08:00
; CHECK: da analyze - consistent input [S]!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
; CHECK: da analyze - confused!
Modified depends() to recognize that when all levels are "=" and there's no possible loo-independent dependence, then there's no dependence. Updated all test result appropriately. llvm-svn: 168719
2012-11-28 03:12:26 +08:00
; CHECK: da analyze - none!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
for.body: ; preds = %entry, %for.body
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
%i.02 = phi i64 [ 0, %entry ], [ %inc, %for.body ]
%B.addr.01 = phi i32* [ %B, %entry ], [ %incdec.ptr, %for.body ]
%conv = trunc i64 %i.02 to i32
%mul = shl i64 %i.02, 1
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %mul
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
store i32 %conv, i32* %arrayidx, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx1 = getelementptr inbounds i32, i32* %A, i64 10
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load i32, i32* %arrayidx1, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.01, i64 1
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
store i32 %0, i32* %B.addr.01, align 4
%inc = add i64 %i.02, 1
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
%exitcond = icmp ne i64 %inc, 7
br i1 %exitcond, label %for.body, label %for.end
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
for.end: ; preds = %for.body
ret void
}
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
;; for (long unsigned i = 0; i < 7; i++) {
;; A[2*i] = i;
;; *B++ = A[-10];
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
define void @weakzerodst5(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
br label %for.body
Modified depends() to recognize that when all levels are "=" and there's no possible loo-independent dependence, then there's no dependence. Updated all test result appropriately. llvm-svn: 168719
2012-11-28 03:12:26 +08:00
; CHECK: da analyze - none!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
Modify depends(Src, Dst, PossiblyLoopIndependent). If the Src and Dst are the same instruction, no loop-independent dependence is possible, so we force the PossiblyLoopIndependent flag to false. The test case results are updated appropriately. llvm-svn: 168678
2012-11-27 14:41:46 +08:00
; CHECK: da analyze - consistent input [S]!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
; CHECK: da analyze - confused!
Modified depends() to recognize that when all levels are "=" and there's no possible loo-independent dependence, then there's no dependence. Updated all test result appropriately. llvm-svn: 168719
2012-11-28 03:12:26 +08:00
; CHECK: da analyze - none!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
for.body: ; preds = %entry, %for.body
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
%i.02 = phi i64 [ 0, %entry ], [ %inc, %for.body ]
%B.addr.01 = phi i32* [ %B, %entry ], [ %incdec.ptr, %for.body ]
%conv = trunc i64 %i.02 to i32
%mul = shl i64 %i.02, 1
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %mul
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
store i32 %conv, i32* %arrayidx, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx1 = getelementptr inbounds i32, i32* %A, i64 -10
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load i32, i32* %arrayidx1, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.01, i64 1
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
store i32 %0, i32* %B.addr.01, align 4
%inc = add i64 %i.02, 1
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
%exitcond = icmp ne i64 %inc, 7
br i1 %exitcond, label %for.body, label %for.end
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
for.end: ; preds = %for.body
ret void
}
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
;; for (long unsigned i = 0; i < n; i++) {
;; A[3*i] = i;
;; *B++ = A[10];
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
define void @weakzerodst6(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
%cmp1 = icmp eq i64 %n, 0
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
br i1 %cmp1, label %for.end, label %for.body.preheader
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
Modified depends() to recognize that when all levels are "=" and there's no possible loo-independent dependence, then there's no dependence. Updated all test result appropriately. llvm-svn: 168719
2012-11-28 03:12:26 +08:00
; CHECK: da analyze - none!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
Modify depends(Src, Dst, PossiblyLoopIndependent). If the Src and Dst are the same instruction, no loop-independent dependence is possible, so we force the PossiblyLoopIndependent flag to false. The test case results are updated appropriately. llvm-svn: 168678
2012-11-27 14:41:46 +08:00
; CHECK: da analyze - consistent input [S]!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
; CHECK: da analyze - confused!
Modified depends() to recognize that when all levels are "=" and there's no possible loo-independent dependence, then there's no dependence. Updated all test result appropriately. llvm-svn: 168719
2012-11-28 03:12:26 +08:00
; CHECK: da analyze - none!
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
for.body.preheader: ; preds = %entry
br label %for.body
for.body: ; preds = %for.body.preheader, %for.body
%i.03 = phi i64 [ %inc, %for.body ], [ 0, %for.body.preheader ]
%B.addr.02 = phi i32* [ %incdec.ptr, %for.body ], [ %B, %for.body.preheader ]
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
%conv = trunc i64 %i.03 to i32
%mul = mul i64 %i.03, 3
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %mul
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
store i32 %conv, i32* %arrayidx, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%arrayidx1 = getelementptr inbounds i32, i32* %A, i64 10
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load i32, i32* %arrayidx1, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.02, i64 1
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
store i32 %0, i32* %B.addr.02, align 4
%inc = add i64 %i.03, 1
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
%exitcond = icmp ne i64 %inc, %n
br i1 %exitcond, label %for.body, label %for.end.loopexit
for.end.loopexit: ; preds = %for.body
br label %for.end
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
DependenceAnalysis: Print all dependency pairs when dumping. Update all testcases. Part of a patch by Preston Briggs. llvm-svn: 167827
2012-11-13 20:12:02 +08:00
for.end: ; preds = %for.end.loopexit, %entry
dependence analysis Patch from Preston Briggs <preston.briggs@gmail.com>. This is an updated version of the dependence-analysis patch, including an MIV test based on Banerjee's inequalities. It's a fairly complete implementation of the paper Practical Dependence Testing Gina Goff, Ken Kennedy, and Chau-Wen Tseng PLDI 1991 It cannot yet propagate constraints between coupled RDIV subscripts (discussed in Section 5.3.2 of the paper). It's organized as a FunctionPass with a single entry point that supports testing for dependence between two instructions in a function. If there's no dependence, it returns null. If there's a dependence, it returns a pointer to a Dependence which can be queried about details (what kind of dependence, is it loop independent, direction and distance vector entries, etc). I haven't included every imaginable feature, but there's a good selection that should be adequate for supporting many loop transformations. Of course, it can be extended as necessary. Included in the patch file are many test cases, commented with C code showing the loops and array references. llvm-svn: 165708
2012-10-11 15:32:34 +08:00
ret void
}