maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/Mips/l3mc.ll

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

115 lines
5.3 KiB
LLVM
Raw Normal View History

[mips][mips16] MIPS16 is not a CPU/Architecture but is an ASE. Summary: The -mcpu=mips16 option caused the Integrated Assembler to crash because it couldn't figure out the architecture revision number to write to the .MIPS.abiflags section. This CPU definition has been removed because, like microMIPS, MIPS16 is an ASE to a base architecture. Reviewers: vkalintiris Subscribers: rkotler, llvm-commits, dsanders Differential Revision: http://reviews.llvm.org/D13656 llvm-svn: 250407
2015-10-15 22:34:23 +08:00
; RUN: llc -mtriple=mipsel-linux-gnu -march=mipsel -mattr=mips16 -mattr=+soft-float -mips16-hard-float -relocation-model=static < %s | FileCheck %s -check-prefix=__call_stub_fp___fixunsdfsi
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
[mips][mips16] MIPS16 is not a CPU/Architecture but is an ASE. Summary: The -mcpu=mips16 option caused the Integrated Assembler to crash because it couldn't figure out the architecture revision number to write to the .MIPS.abiflags section. This CPU definition has been removed because, like microMIPS, MIPS16 is an ASE to a base architecture. Reviewers: vkalintiris Subscribers: rkotler, llvm-commits, dsanders Differential Revision: http://reviews.llvm.org/D13656 llvm-svn: 250407
2015-10-15 22:34:23 +08:00
; RUN: llc -mtriple=mipsel-linux-gnu -march=mipsel -mattr=mips16 -mattr=+soft-float -mips16-hard-float -relocation-model=static < %s | FileCheck %s -check-prefix=__call_stub_fp___floatdidf
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
[mips][mips16] MIPS16 is not a CPU/Architecture but is an ASE. Summary: The -mcpu=mips16 option caused the Integrated Assembler to crash because it couldn't figure out the architecture revision number to write to the .MIPS.abiflags section. This CPU definition has been removed because, like microMIPS, MIPS16 is an ASE to a base architecture. Reviewers: vkalintiris Subscribers: rkotler, llvm-commits, dsanders Differential Revision: http://reviews.llvm.org/D13656 llvm-svn: 250407
2015-10-15 22:34:23 +08:00
; RUN: llc -mtriple=mipsel-linux-gnu -march=mipsel -mattr=mips16 -mattr=+soft-float -mips16-hard-float -relocation-model=static < %s | FileCheck %s -check-prefix=__call_stub_fp___floatdisf
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
[mips][mips16] MIPS16 is not a CPU/Architecture but is an ASE. Summary: The -mcpu=mips16 option caused the Integrated Assembler to crash because it couldn't figure out the architecture revision number to write to the .MIPS.abiflags section. This CPU definition has been removed because, like microMIPS, MIPS16 is an ASE to a base architecture. Reviewers: vkalintiris Subscribers: rkotler, llvm-commits, dsanders Differential Revision: http://reviews.llvm.org/D13656 llvm-svn: 250407
2015-10-15 22:34:23 +08:00
; RUN: llc -mtriple=mipsel-linux-gnu -march=mipsel -mattr=mips16 -mattr=+soft-float -mips16-hard-float -relocation-model=static < %s | FileCheck %s -check-prefix=__call_stub_fp___floatundidf
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
[mips][mips16] MIPS16 is not a CPU/Architecture but is an ASE. Summary: The -mcpu=mips16 option caused the Integrated Assembler to crash because it couldn't figure out the architecture revision number to write to the .MIPS.abiflags section. This CPU definition has been removed because, like microMIPS, MIPS16 is an ASE to a base architecture. Reviewers: vkalintiris Subscribers: rkotler, llvm-commits, dsanders Differential Revision: http://reviews.llvm.org/D13656 llvm-svn: 250407
2015-10-15 22:34:23 +08:00
; RUN: llc -mtriple=mipsel-linux-gnu -march=mipsel -mattr=mips16 -mattr=+soft-float -mips16-hard-float -relocation-model=static < %s | FileCheck %s -check-prefix=__call_stub_fp___fixsfdi
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
[mips][mips16] MIPS16 is not a CPU/Architecture but is an ASE. Summary: The -mcpu=mips16 option caused the Integrated Assembler to crash because it couldn't figure out the architecture revision number to write to the .MIPS.abiflags section. This CPU definition has been removed because, like microMIPS, MIPS16 is an ASE to a base architecture. Reviewers: vkalintiris Subscribers: rkotler, llvm-commits, dsanders Differential Revision: http://reviews.llvm.org/D13656 llvm-svn: 250407
2015-10-15 22:34:23 +08:00
; RUN: llc -mtriple=mipsel-linux-gnu -march=mipsel -mattr=mips16 -mattr=+soft-float -mips16-hard-float -relocation-model=static < %s | FileCheck %s -check-prefix=__call_stub_fp___fixunsdfdi
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
[mips][mips16] MIPS16 is not a CPU/Architecture but is an ASE. Summary: The -mcpu=mips16 option caused the Integrated Assembler to crash because it couldn't figure out the architecture revision number to write to the .MIPS.abiflags section. This CPU definition has been removed because, like microMIPS, MIPS16 is an ASE to a base architecture. Reviewers: vkalintiris Subscribers: rkotler, llvm-commits, dsanders Differential Revision: http://reviews.llvm.org/D13656 llvm-svn: 250407
2015-10-15 22:34:23 +08:00
; RUN: llc -mtriple=mipsel-linux-gnu -march=mipsel -mattr=mips16 -mattr=+soft-float -mips16-hard-float -relocation-model=static < %s | FileCheck %s -check-prefix=__call_stub_fp___fixdfdi
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
[mips][mips16] MIPS16 is not a CPU/Architecture but is an ASE. Summary: The -mcpu=mips16 option caused the Integrated Assembler to crash because it couldn't figure out the architecture revision number to write to the .MIPS.abiflags section. This CPU definition has been removed because, like microMIPS, MIPS16 is an ASE to a base architecture. Reviewers: vkalintiris Subscribers: rkotler, llvm-commits, dsanders Differential Revision: http://reviews.llvm.org/D13656 llvm-svn: 250407
2015-10-15 22:34:23 +08:00
; RUN: llc -mtriple=mipsel-linux-gnu -march=mipsel -mattr=mips16 -mattr=+soft-float -mips16-hard-float -relocation-model=static < %s | FileCheck %s -check-prefix=__call_stub_fp___fixunssfsi
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
[mips][mips16] MIPS16 is not a CPU/Architecture but is an ASE. Summary: The -mcpu=mips16 option caused the Integrated Assembler to crash because it couldn't figure out the architecture revision number to write to the .MIPS.abiflags section. This CPU definition has been removed because, like microMIPS, MIPS16 is an ASE to a base architecture. Reviewers: vkalintiris Subscribers: rkotler, llvm-commits, dsanders Differential Revision: http://reviews.llvm.org/D13656 llvm-svn: 250407
2015-10-15 22:34:23 +08:00
; RUN: llc -mtriple=mipsel-linux-gnu -march=mipsel -mattr=mips16 -mattr=+soft-float -mips16-hard-float -relocation-model=static < %s | FileCheck %s -check-prefix=__call_stub_fp___fixunssfdi
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
[mips][mips16] MIPS16 is not a CPU/Architecture but is an ASE. Summary: The -mcpu=mips16 option caused the Integrated Assembler to crash because it couldn't figure out the architecture revision number to write to the .MIPS.abiflags section. This CPU definition has been removed because, like microMIPS, MIPS16 is an ASE to a base architecture. Reviewers: vkalintiris Subscribers: rkotler, llvm-commits, dsanders Differential Revision: http://reviews.llvm.org/D13656 llvm-svn: 250407
2015-10-15 22:34:23 +08:00
; RUN: llc -mtriple=mipsel-linux-gnu -march=mipsel -mattr=mips16 -mattr=+soft-float -mips16-hard-float -relocation-model=static < %s | FileCheck %s -check-prefix=__call_stub_fp___floatundisf
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
@ll1 = global i64 0, align 8
@ll2 = global i64 0, align 8
@ll3 = global i64 0, align 8
@l1 = global i32 0, align 4
@l2 = global i32 0, align 4
@l3 = global i32 0, align 4
@ull1 = global i64 0, align 8
@ull2 = global i64 0, align 8
@ull3 = global i64 0, align 8
@ul1 = global i32 0, align 4
@ul2 = global i32 0, align 4
@ul3 = global i32 0, align 4
@d1 = global double 0.000000e+00, align 8
@d2 = global double 0.000000e+00, align 8
@d3 = global double 0.000000e+00, align 8
@d4 = global double 0.000000e+00, align 8
@f1 = global float 0.000000e+00, align 4
@f2 = global float 0.000000e+00, align 4
@f3 = global float 0.000000e+00, align 4
@f4 = global float 0.000000e+00, align 4
; Function Attrs: nounwind
define void @_Z3foov() #0 {
entry:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load double, double* @d1, align 8
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv = fptosi double %0 to i64
store i64 %conv, i64* @ll1, align 8
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load double, double* @d2, align 8
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv1 = fptoui double %1 to i64
store i64 %conv1, i64* @ull1, align 8
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load float, float* @f1, align 4
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv2 = fptosi float %2 to i64
store i64 %conv2, i64* @ll2, align 8
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%3 = load float, float* @f2, align 4
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv3 = fptoui float %3 to i64
store i64 %conv3, i64* @ull2, align 8
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%4 = load double, double* @d3, align 8
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv4 = fptosi double %4 to i32
store i32 %conv4, i32* @l1, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%5 = load double, double* @d4, align 8
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv5 = fptoui double %5 to i32
store i32 %conv5, i32* @ul1, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%6 = load float, float* @f3, align 4
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv6 = fptosi float %6 to i32
store i32 %conv6, i32* @l2, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%7 = load float, float* @f4, align 4
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv7 = fptoui float %7 to i32
store i32 %conv7, i32* @ul2, align 4
ret void
}
; Function Attrs: nounwind
define void @_Z3goov() #0 {
entry:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load i64, i64* @ll1, align 8
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv = sitofp i64 %0 to double
store double %conv, double* @d1, align 8
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load i64, i64* @ull1, align 8
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv1 = uitofp i64 %1 to double
store double %conv1, double* @d2, align 8
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load i64, i64* @ll2, align 8
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv2 = sitofp i64 %2 to float
store float %conv2, float* @f1, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%3 = load i64, i64* @ull2, align 8
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv3 = uitofp i64 %3 to float
store float %conv3, float* @f2, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%4 = load i32, i32* @l1, align 4
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv4 = sitofp i32 %4 to double
store double %conv4, double* @d3, align 8
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%5 = load i32, i32* @ul1, align 4
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv5 = uitofp i32 %5 to double
store double %conv5, double* @d4, align 8
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%6 = load i32, i32* @l2, align 4
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv6 = sitofp i32 %6 to float
store float %conv6, float* @f3, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%7 = load i32, i32* @ul2, align 4
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
%conv7 = uitofp i32 %7 to float
store float %conv7, float* @f4, align 4
ret void
}
Migrate function attribute "no-frame-pointer-elim" to "frame-pointer"="all" as cleanups after D56351
2019-12-25 07:52:21 +08:00
attributes #0 = { nounwind "less-precise-fpmad"="false" "frame-pointer"="all" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
This patch has two main functions: 1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc. 2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more logical place to handle this and we have known for some time that we needed to move the code later and not implement it using inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list during the original putback of the Mips16HardFloat pass but was not practical for us do at that time. llvm-svn: 201426
2014-02-15 03:16:39 +08:00
; __call_stub_fp___fixunsdfsi: __call_stub_fp___fixunsdfsi:
; __call_stub_fp___floatdidf: __call_stub_fp___floatdidf:
; __call_stub_fp___floatdisf: __call_stub_fp___floatdisf:
; __call_stub_fp___floatundidf: __call_stub_fp___floatundidf:
; __call_stub_fp___fixsfdi: __call_stub_fp___fixsfdi:
; __call_stub_fp___fixunsdfdi: __call_stub_fp___fixunsdfdi:
; __call_stub_fp___fixdfdi: __call_stub_fp___fixdfdi:
; __call_stub_fp___fixunssfsi: __call_stub_fp___fixunssfsi:
; __call_stub_fp___fixunssfdi: __call_stub_fp___fixunssfdi:
; __call_stub_fp___floatundisf: __call_stub_fp___floatundisf: