maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/ARM/call-tc.ll

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

184 lines
5.1 KiB
LLVM
Raw Normal View History

ARM & AArch64: make use of common cmpxchg idioms after expansion The C and C++ semantics for compare_exchange require it to return a bool indicating success. This gets mapped to LLVM IR which follows each cmpxchg with an icmp of the value loaded against the desired value. When lowered to ldxr/stxr loops, this extra comparison is redundant: its results are implicit in the control-flow of the function. This commit makes two changes: it replaces that icmp with appropriate PHI nodes, and then makes sure earlyCSE is called after expansion to actually make use of the opportunities revealed. I've also added -{arm,aarch64}-enable-atomic-tidy options, so that existing fragile tests aren't perturbed too much by the change. Many of them either rely on undef/unreachable too pervasively to be restored to something well-defined (particularly while making sure they test the same obscure assert from many years ago), or depend on a particular CFG shape, which is disrupted by SimplifyCFG. rdar://problem/16227836 llvm-svn: 209883
2014-05-30 18:09:59 +08:00
; RUN: llc < %s -mtriple=armv6-apple-ios5.0 -mattr=+vfp2 -arm-atomic-cfg-tidy=0 | FileCheck %s -check-prefix=CHECKV6
; RUN: llc < %s -mtriple=thumbv7-apple-ios5.0 -arm-atomic-cfg-tidy=0 | FileCheck %s -check-prefix=CHECKT2D
; RUN: llc < %s -mtriple=armv6-linux-gnueabi -relocation-model=pic -mattr=+vfp2 -arm-atomic-cfg-tidy=0 \
ARM: remove ancient -arm-tail-calls option This option is from 2010, designed to work around a linker issue on Darwin for ARM. According to grosbach this is no longer an issue and this option can safely be removed. llvm-svn: 203576
2014-03-11 23:09:49 +08:00
; RUN: | FileCheck %s -check-prefix=CHECKELF
Reenable tail calls for iOS 5.0 and later. llvm-svn: 141370
2011-10-08 01:17:49 +08:00
; Enable tailcall optimization for iOS 5.0
; rdar://9120031
Enable tail calls on ARM by default, with some basic tests. This has been well tested on Darwin but not elsewhere. It should work provided the linker correctly resolves B.W <label in other function> which it has not seen before, at least from llvm-based compilers. I'm leaving the arm-tail-calls switch in until I see if there's any problems because of that; it might need to be disabled for some environments. llvm-svn: 106299
2010-06-19 03:00:18 +08:00
@t = weak global i32 ()* null ; <i32 ()**> [#uses=1]
declare void @g(i32, i32, i32, i32)
Migrate function attribute "no-frame-pointer-elim" to "frame-pointer"="all" as cleanups after D56351
2019-12-25 07:52:21 +08:00
define void @t1() "frame-pointer"="all" {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKELF-LABEL: t1:
Don't print (PLT) on arm. The R_ARM_PLT32 relocation is deprecated and is not produced by MC. This means that the code being deleted is dead from the .o point of view and was making the .s more confusing. llvm-svn: 272909
2016-06-17 00:09:53 +08:00
; CHECKELF: bl g
Enable tail calls on ARM by default, with some basic tests. This has been well tested on Darwin but not elsewhere. It should work provided the linker correctly resolves B.W <label in other function> which it has not seen before, at least from llvm-based compilers. I'm leaving the arm-tail-calls switch in until I see if there's any problems because of that; it might need to be disabled for some environments. llvm-svn: 106299
2010-06-19 03:00:18 +08:00
call void @g( i32 1, i32 2, i32 3, i32 4 )
ret void
}
Migrate function attribute "no-frame-pointer-elim" to "frame-pointer"="all" as cleanups after D56351
2019-12-25 07:52:21 +08:00
define void @t2() "frame-pointer"="all" {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKV6-LABEL: t2:
Use ARMPseudoExpand for ARM tail calls. llvm-svn: 134719
2011-07-09 02:50:22 +08:00
; CHECKV6: bx r0
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKT2D-LABEL: t2:
Make tTAILJMPr/tTAILJMPrND emit a tBX without a preceding MOV of PC to LR. This fixes <rdar://problem/9495913> llvm-svn: 132042
2011-05-25 12:45:27 +08:00
; CHECKT2D: ldr
; CHECKT2D-NEXT: ldr
Use ARMPseudoExpand for ARM tail calls. llvm-svn: 134719
2011-07-09 02:50:22 +08:00
; CHECKT2D-NEXT: bx r0
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%tmp = load i32 ()*, i32 ()** @t ; <i32 ()*> [#uses=1]
Enable tail calls on ARM by default, with some basic tests. This has been well tested on Darwin but not elsewhere. It should work provided the linker correctly resolves B.W <label in other function> which it has not seen before, at least from llvm-based compilers. I'm leaving the arm-tail-calls switch in until I see if there's any problems because of that; it might need to be disabled for some environments. llvm-svn: 106299
2010-06-19 03:00:18 +08:00
%tmp.upgrd.2 = tail call i32 %tmp( ) ; <i32> [#uses=0]
ret void
}
Migrate function attribute "no-frame-pointer-elim" to "frame-pointer"="all" as cleanups after D56351
2019-12-25 07:52:21 +08:00
define void @t3() "frame-pointer"="all" {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKV6-LABEL: t3:
Use ARMPseudoExpand for ARM tail calls. llvm-svn: 134719
2011-07-09 02:50:22 +08:00
; CHECKV6: b _t2
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKELF-LABEL: t3:
Don't print (PLT) on arm. The R_ARM_PLT32 relocation is deprecated and is not produced by MC. This means that the code being deleted is dead from the .o point of view and was making the .s more confusing. llvm-svn: 272909
2016-06-17 00:09:53 +08:00
; CHECKELF: b t2
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKT2D-LABEL: t3:
Use ARMPseudoExpand for ARM tail calls. llvm-svn: 134719
2011-07-09 02:50:22 +08:00
; CHECKT2D: b.w _t2
Fix <rdar://problem/9476260> by having tail calls always generate 32-bit branches in Darwin Thumb2 code. Tail calls are already disabled on Thumb1. llvm-svn: 131894
2011-05-23 09:57:17 +08:00
Changes to ARM tail calls, mostly cosmetic. Add explicit testcases for tail calls within the same module. Duplicate some code to humor those who think .w doesn't apply on ARM. Leave this disabled on Thumb1, and add some comments explaining why it's hard and won't gain much. llvm-svn: 107851
2010-07-08 09:18:23 +08:00
tail call void @t2( ) ; <i32> [#uses=0]
ret void
}
Enable sibling call optimization of libcalls which are expanded during legalization time. Since at legalization time there is no mapping from SDNode back to the corresponding LLVM instruction and the return SDNode is target specific, this requires a target hook to check for eligibility. Only x86 and ARM support this form of sibcall optimization right now. rdar://8707777 llvm-svn: 120501
2010-12-01 07:55:39 +08:00
; Sibcall optimization of expanded libcalls. rdar://8707777
Migrate function attribute "no-frame-pointer-elim" to "frame-pointer"="all" as cleanups after D56351
2019-12-25 07:52:21 +08:00
define double @t4(double %a) nounwind readonly ssp "frame-pointer"="all" {
Enable sibling call optimization of libcalls which are expanded during legalization time. Since at legalization time there is no mapping from SDNode back to the corresponding LLVM instruction and the return SDNode is target specific, this requires a target hook to check for eligibility. Only x86 and ARM support this form of sibcall optimization right now. rdar://8707777 llvm-svn: 120501
2010-12-01 07:55:39 +08:00
entry:
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKV6-LABEL: t4:
Use ARMPseudoExpand for ARM tail calls. llvm-svn: 134719
2011-07-09 02:50:22 +08:00
; CHECKV6: b _sin
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKELF-LABEL: t4:
Don't print (PLT) on arm. The R_ARM_PLT32 relocation is deprecated and is not produced by MC. This means that the code being deleted is dead from the .o point of view and was making the .s more confusing. llvm-svn: 272909
2016-06-17 00:09:53 +08:00
; CHECKELF: b sin
Enable sibling call optimization of libcalls which are expanded during legalization time. Since at legalization time there is no mapping from SDNode back to the corresponding LLVM instruction and the return SDNode is target specific, this requires a target hook to check for eligibility. Only x86 and ARM support this form of sibcall optimization right now. rdar://8707777 llvm-svn: 120501
2010-12-01 07:55:39 +08:00
%0 = tail call double @sin(double %a) nounwind readonly ; <double> [#uses=1]
ret double %0
}
Migrate function attribute "no-frame-pointer-elim" to "frame-pointer"="all" as cleanups after D56351
2019-12-25 07:52:21 +08:00
define float @t5(float %a) nounwind readonly ssp "frame-pointer"="all" {
Enable sibling call optimization of libcalls which are expanded during legalization time. Since at legalization time there is no mapping from SDNode back to the corresponding LLVM instruction and the return SDNode is target specific, this requires a target hook to check for eligibility. Only x86 and ARM support this form of sibcall optimization right now. rdar://8707777 llvm-svn: 120501
2010-12-01 07:55:39 +08:00
entry:
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKV6-LABEL: t5:
Use ARMPseudoExpand for ARM tail calls. llvm-svn: 134719
2011-07-09 02:50:22 +08:00
; CHECKV6: b _sinf
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKELF-LABEL: t5:
Don't print (PLT) on arm. The R_ARM_PLT32 relocation is deprecated and is not produced by MC. This means that the code being deleted is dead from the .o point of view and was making the .s more confusing. llvm-svn: 272909
2016-06-17 00:09:53 +08:00
; CHECKELF: b sinf
Enable sibling call optimization of libcalls which are expanded during legalization time. Since at legalization time there is no mapping from SDNode back to the corresponding LLVM instruction and the return SDNode is target specific, this requires a target hook to check for eligibility. Only x86 and ARM support this form of sibcall optimization right now. rdar://8707777 llvm-svn: 120501
2010-12-01 07:55:39 +08:00
%0 = tail call float @sinf(float %a) nounwind readonly ; <float> [#uses=1]
ret float %0
}
declare float @sinf(float) nounwind readonly
declare double @sin(double) nounwind readonly
Migrate function attribute "no-frame-pointer-elim" to "frame-pointer"="all" as cleanups after D56351
2019-12-25 07:52:21 +08:00
define i32 @t6(i32 %a, i32 %b) nounwind readnone "frame-pointer"="all" {
Enable sibling call optimization of libcalls which are expanded during legalization time. Since at legalization time there is no mapping from SDNode back to the corresponding LLVM instruction and the return SDNode is target specific, this requires a target hook to check for eligibility. Only x86 and ARM support this form of sibcall optimization right now. rdar://8707777 llvm-svn: 120501
2010-12-01 07:55:39 +08:00
entry:
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKV6-LABEL: t6:
Use ARMPseudoExpand for ARM tail calls. llvm-svn: 134719
2011-07-09 02:50:22 +08:00
; CHECKV6: b ___divsi3
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKELF-LABEL: t6:
Don't print (PLT) on arm. The R_ARM_PLT32 relocation is deprecated and is not produced by MC. This means that the code being deleted is dead from the .o point of view and was making the .s more confusing. llvm-svn: 272909
2016-06-17 00:09:53 +08:00
; CHECKELF: b __aeabi_idiv
Enable sibling call optimization of libcalls which are expanded during legalization time. Since at legalization time there is no mapping from SDNode back to the corresponding LLVM instruction and the return SDNode is target specific, this requires a target hook to check for eligibility. Only x86 and ARM support this form of sibcall optimization right now. rdar://8707777 llvm-svn: 120501
2010-12-01 07:55:39 +08:00
%0 = sdiv i32 %a, %b
ret i32 %0
}
Don't merge restore with tail call instruction. llvm-svn: 124167
2011-01-25 09:28:33 +08:00
; Make sure the tail call instruction isn't deleted
; rdar://8309338
declare void @foo() nounwind
Migrate function attribute "no-frame-pointer-elim" to "frame-pointer"="all" as cleanups after D56351
2019-12-25 07:52:21 +08:00
define void @t7() nounwind "frame-pointer"="all" {
Don't merge restore with tail call instruction. llvm-svn: 124167
2011-01-25 09:28:33 +08:00
entry:
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKT2D-LABEL: t7:
[ARM] Enable shrink-wrapping by default. Differential Revision: http://reviews.llvm.org/D14357 rdar://problem/21942589 llvm-svn: 253411
2015-11-18 08:40:54 +08:00
; CHECKT2D: it ne
; CHECKT2D-NEXT: bne.w _foo
; CHECKT2D-NEXT: push
; CHECKT2D-NEXT: mov r7, sp
ARM: stop emitting blx instructions for most calls on MachO. I'm really not sure why we were in the first place, it's the linker's job to convert between BL/BLX as necessary. Even worse, using BLX left Thumb calls that could be locally resolved completely unencodable since all offsets to BLX are multiples of 4. rdar://26182344 llvm-svn: 269101
2016-05-11 03:17:47 +08:00
; CHECKT2D-NEXT: bl _foo
Don't merge restore with tail call instruction. llvm-svn: 124167
2011-01-25 09:28:33 +08:00
br i1 undef, label %bb, label %bb1.lr.ph
bb1.lr.ph:
tail call void @foo() nounwind
unreachable
bb:
tail call void @foo() nounwind
ret void
}
ARM target should allow codegenprep to duplicate ret instructions to enable tailcall opt. rdar://11140249 llvm-svn: 153717
2012-03-30 09:24:39 +08:00
; Make sure codegenprep is duplicating ret instructions to enable tail calls.
; rdar://11140249
Migrate function attribute "no-frame-pointer-elim" to "frame-pointer"="all" as cleanups after D56351
2019-12-25 07:52:21 +08:00
define i32 @t8(i32 %x) nounwind ssp "frame-pointer"="all" {
ARM target should allow codegenprep to duplicate ret instructions to enable tailcall opt. rdar://11140249 llvm-svn: 153717
2012-03-30 09:24:39 +08:00
entry:
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKT2D-LABEL: t8:
ARM target should allow codegenprep to duplicate ret instructions to enable tailcall opt. rdar://11140249 llvm-svn: 153717
2012-03-30 09:24:39 +08:00
; CHECKT2D-NOT: push
%and = and i32 %x, 1
%tobool = icmp eq i32 %and, 0
br i1 %tobool, label %if.end, label %if.then
if.then: ; preds = %entry
; CHECKT2D: bne.w _a
%call = tail call i32 @a(i32 %x) nounwind
br label %return
if.end: ; preds = %entry
%and1 = and i32 %x, 2
%tobool2 = icmp eq i32 %and1, 0
br i1 %tobool2, label %if.end5, label %if.then3
if.then3: ; preds = %if.end
[Thumb] Teach ISel how to lower compares of AND bitmasks efficiently This is essentially a recommit of r285893, but with a correctness fix. The problem of the original commit was that this: bic r5, r7, #31 cbz r5, .LBB2_10 got rewritten into: lsrs r5, r7, #5 beq .LBB2_10 The result in destination register r5 is not the same and this is incorrect when r5 is not dead. So this fix includes checking the uses of the AND destination register. And also, compared to the original commit, some regression tests didn't need changing anymore because of this extra check. For completeness, this was the original commit message: For the common pattern (CMPZ (AND x, #bitmask), #0), we can do some more efficient instruction selection if the bitmask is one consecutive sequence of set bits (32 - clz(bm) - ctz(bm) == popcount(bm)). 1) If the bitmask touches the LSB, then we can remove all the upper bits and set the flags by doing one LSLS. 2) If the bitmask touches the MSB, then we can remove all the lower bits and set the flags with one LSRS. 3) If the bitmask has popcount == 1 (only one set bit), we can shift that bit into the sign bit with one LSLS and change the condition query from NE/EQ to MI/PL (we could also implement this by shifting into the carry bit and branching on BCC/BCS). 4) Otherwise, we can emit a sequence of LSLS+LSRS to remove the upper and lower zero bits of the mask. 1-3 require only one 16-bit instruction and can elide the CMP. 4 requires two 16-bit instructions but can elide the CMP and doesn't require materializing a complex immediate, so is also a win. Differential Revision: https://reviews.llvm.org/D27761 llvm-svn: 289794
2016-12-15 17:38:59 +08:00
; CHECKT2D: bmi.w _b
ARM target should allow codegenprep to duplicate ret instructions to enable tailcall opt. rdar://11140249 llvm-svn: 153717
2012-03-30 09:24:39 +08:00
%call4 = tail call i32 @b(i32 %x) nounwind
br label %return
if.end5: ; preds = %if.end
; CHECKT2D: b.w _c
%call6 = tail call i32 @c(i32 %x) nounwind
br label %return
return: ; preds = %if.end5, %if.then3, %if.then
%retval.0 = phi i32 [ %call, %if.then ], [ %call4, %if.then3 ], [ %call6, %if.end5 ]
ret i32 %retval.0
}
declare i32 @a(i32)
declare i32 @b(i32)
declare i32 @c(i32)
Fix a long standing tail call optimization bug. When a libcall is emitted legalizer always use the DAG entry node. This is wrong when the libcall is emitted as a tail call since it effectively folds the return node. If the return node's input chain is not the entry (i.e. call, load, or store) use that as the tail call input chain. PR12419 rdar://9770785 rdar://11195178 llvm-svn: 154370
2012-04-10 09:51:00 +08:00
; PR12419
; rdar://11195178
; Use the correct input chain for the tailcall node or else the call to
; _ZN9MutexLockD1Ev would be lost.
%class.MutexLock = type { i8 }
@x = external global i32, align 4
Migrate function attribute "no-frame-pointer-elim" to "frame-pointer"="all" as cleanups after D56351
2019-12-25 07:52:21 +08:00
define i32 @t9() nounwind "frame-pointer"="all" {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKT2D-LABEL: t9:
ARM: stop emitting blx instructions for most calls on MachO. I'm really not sure why we were in the first place, it's the linker's job to convert between BL/BLX as necessary. Even worse, using BLX left Thumb calls that could be locally resolved completely unencodable since all offsets to BLX are multiples of 4. rdar://26182344 llvm-svn: 269101
2016-05-11 03:17:47 +08:00
; CHECKT2D: bl __ZN9MutexLockC1Ev
; CHECKT2D: bl __ZN9MutexLockD1Ev
Add proper checks. llvm-svn: 154379
2012-04-10 11:15:42 +08:00
; CHECKT2D: b.w ___divsi3
Fix a long standing tail call optimization bug. When a libcall is emitted legalizer always use the DAG entry node. This is wrong when the libcall is emitted as a tail call since it effectively folds the return node. If the return node's input chain is not the entry (i.e. call, load, or store) use that as the tail call input chain. PR12419 rdar://9770785 rdar://11195178 llvm-svn: 154370
2012-04-10 09:51:00 +08:00
%lock = alloca %class.MutexLock, align 1
%1 = call %class.MutexLock* @_ZN9MutexLockC1Ev(%class.MutexLock* %lock)
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%2 = load i32, i32* @x, align 4
Fix a long standing tail call optimization bug. When a libcall is emitted legalizer always use the DAG entry node. This is wrong when the libcall is emitted as a tail call since it effectively folds the return node. If the return node's input chain is not the entry (i.e. call, load, or store) use that as the tail call input chain. PR12419 rdar://9770785 rdar://11195178 llvm-svn: 154370
2012-04-10 09:51:00 +08:00
%3 = sdiv i32 1000, %2
%4 = call %class.MutexLock* @_ZN9MutexLockD1Ev(%class.MutexLock* %lock)
ret i32 %3
}
declare %class.MutexLock* @_ZN9MutexLockC1Ev(%class.MutexLock*) unnamed_addr nounwind align 2
declare %class.MutexLock* @_ZN9MutexLockD1Ev(%class.MutexLock*) unnamed_addr nounwind align 2
Correctly preserve the input chain for potential tailcall nodes whose return values are bitcasts. The chain had previously been being clobbered with the entry node to the dag, which sometimes caused other code in the function to be erroneously deleted when tailcall optimization kicked in. <rdar://problem/13827621> llvm-svn: 181696
2013-05-13 18:21:19 +08:00
; rdar://13827621
; Correctly preserve the input chain for the tailcall node in the bitcast case,
; otherwise the call to floorf is lost.
Migrate function attribute "no-frame-pointer-elim" to "frame-pointer"="all" as cleanups after D56351
2019-12-25 07:52:21 +08:00
define float @libcall_tc_test2(float* nocapture %a, float %b) "frame-pointer"="all" {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECKT2D-LABEL: libcall_tc_test2:
ARM: stop emitting blx instructions for most calls on MachO. I'm really not sure why we were in the first place, it's the linker's job to convert between BL/BLX as necessary. Even worse, using BLX left Thumb calls that could be locally resolved completely unencodable since all offsets to BLX are multiples of 4. rdar://26182344 llvm-svn: 269101
2016-05-11 03:17:47 +08:00
; CHECKT2D: bl _floorf
Correctly preserve the input chain for potential tailcall nodes whose return values are bitcasts. The chain had previously been being clobbered with the entry node to the dag, which sometimes caused other code in the function to be erroneously deleted when tailcall optimization kicked in. <rdar://problem/13827621> llvm-svn: 181696
2013-05-13 18:21:19 +08:00
; CHECKT2D: b.w _truncf
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load float, float* %a, align 4
Correctly preserve the input chain for potential tailcall nodes whose return values are bitcasts. The chain had previously been being clobbered with the entry node to the dag, which sometimes caused other code in the function to be erroneously deleted when tailcall optimization kicked in. <rdar://problem/13827621> llvm-svn: 181696
2013-05-13 18:21:19 +08:00
%call = tail call float @floorf(float %1)
store float %call, float* %a, align 4
%call1 = tail call float @truncf(float %b)
ret float %call1
}
declare float @floorf(float) readnone
declare float @truncf(float) readnone