maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/AArch64/addsub_ext.ll

190 lines
6.2 KiB
LLVM
Raw Normal View History

ARM & AArch64: make use of common cmpxchg idioms after expansion The C and C++ semantics for compare_exchange require it to return a bool indicating success. This gets mapped to LLVM IR which follows each cmpxchg with an icmp of the value loaded against the desired value. When lowered to ldxr/stxr loops, this extra comparison is redundant: its results are implicit in the control-flow of the function. This commit makes two changes: it replaces that icmp with appropriate PHI nodes, and then makes sure earlyCSE is called after expansion to actually make use of the opportunities revealed. I've also added -{arm,aarch64}-enable-atomic-tidy options, so that existing fragile tests aren't perturbed too much by the change. Many of them either rely on undef/unreachable too pervasively to be restored to something well-defined (particularly while making sure they test the same obscure assert from many years ago), or depend on a particular CFG shape, which is disrupted by SimplifyCFG. rdar://problem/16227836 llvm-svn: 209883
2014-05-30 18:09:59 +08:00
; RUN: llc -verify-machineinstrs %s -o - -mtriple=aarch64-linux-gnu -aarch64-atomic-cfg-tidy=0 | FileCheck %s
Add AArch64 as an experimental target. This patch adds support for AArch64 (ARM's 64-bit architecture) to LLVM in the "experimental" category. Currently, it won't be built unless requested explicitly. This initial commit should have support for: + Assembly of all scalar (i.e. non-NEON, non-Crypto) instructions (except the late addition CRC instructions). + CodeGen features required for C++03 and C99. + Compilation for the "small" memory model: code+static data < 4GB. + Absolute and position-independent code. + GNU-style (i.e. "__thread") TLS. + Debugging information. The principal omission, currently, is performance tuning. This patch excludes the NEON support also reviewed due to an outbreak of batshit insanity in our legal department. That will be committed soon bringing the changes to precisely what has been approved. Further reviews would be gratefully received. llvm-svn: 174054
2013-01-31 20:12:40 +08:00
@var8 = global i8 0
@var16 = global i16 0
@var32 = global i32 0
@var64 = global i64 0
ARM64: add support for AArch64's addsub_ext.ll There was one definite issue in ARM64 (the off-by-1 check for whether a shift could be folded in) and one difference that is probably correct: ARM64 didn't fold nodes with multiple uses into the arithmetic operations unless optimising for code size. llvm-svn: 206168
2014-04-14 20:50:50 +08:00
define void @addsub_i8rhs() minsize {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: addsub_i8rhs:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%val8_tmp = load i8, i8* @var8
%lhs32 = load i32, i32* @var32
%lhs64 = load i64, i64* @var64
Add AArch64 as an experimental target. This patch adds support for AArch64 (ARM's 64-bit architecture) to LLVM in the "experimental" category. Currently, it won't be built unless requested explicitly. This initial commit should have support for: + Assembly of all scalar (i.e. non-NEON, non-Crypto) instructions (except the late addition CRC instructions). + CodeGen features required for C++03 and C99. + Compilation for the "small" memory model: code+static data < 4GB. + Absolute and position-independent code. + GNU-style (i.e. "__thread") TLS. + Debugging information. The principal omission, currently, is performance tuning. This patch excludes the NEON support also reviewed due to an outbreak of batshit insanity in our legal department. That will be committed soon bringing the changes to precisely what has been approved. Further reviews would be gratefully received. llvm-svn: 174054
2013-01-31 20:12:40 +08:00
; Need this to prevent extension upon load and give a vanilla i8 operand.
%val8 = add i8 %val8_tmp, 123
; Zero-extending to 32-bits
%rhs32_zext = zext i8 %val8 to i32
%res32_zext = add i32 %lhs32, %rhs32_zext
store volatile i32 %res32_zext, i32* @var32
; CHECK: add {{w[0-9]+}}, {{w[0-9]+}}, {{w[0-9]+}}, uxtb
%rhs32_zext_shift = shl i32 %rhs32_zext, 3
%res32_zext_shift = add i32 %lhs32, %rhs32_zext_shift
store volatile i32 %res32_zext_shift, i32* @var32
; CHECK: add {{w[0-9]+}}, {{w[0-9]+}}, {{w[0-9]+}}, uxtb #3
; Zero-extending to 64-bits
%rhs64_zext = zext i8 %val8 to i64
%res64_zext = add i64 %lhs64, %rhs64_zext
store volatile i64 %res64_zext, i64* @var64
; CHECK: add {{x[0-9]+}}, {{x[0-9]+}}, {{w[0-9]+}}, uxtb
%rhs64_zext_shift = shl i64 %rhs64_zext, 1
%res64_zext_shift = add i64 %lhs64, %rhs64_zext_shift
store volatile i64 %res64_zext_shift, i64* @var64
; CHECK: add {{x[0-9]+}}, {{x[0-9]+}}, {{w[0-9]+}}, uxtb #1
; Sign-extending to 32-bits
%rhs32_sext = sext i8 %val8 to i32
%res32_sext = add i32 %lhs32, %rhs32_sext
store volatile i32 %res32_sext, i32* @var32
; CHECK: add {{w[0-9]+}}, {{w[0-9]+}}, {{w[0-9]+}}, sxtb
%rhs32_sext_shift = shl i32 %rhs32_sext, 1
%res32_sext_shift = add i32 %lhs32, %rhs32_sext_shift
store volatile i32 %res32_sext_shift, i32* @var32
; CHECK: add {{w[0-9]+}}, {{w[0-9]+}}, {{w[0-9]+}}, sxtb #1
; Sign-extending to 64-bits
%rhs64_sext = sext i8 %val8 to i64
%res64_sext = add i64 %lhs64, %rhs64_sext
store volatile i64 %res64_sext, i64* @var64
; CHECK: add {{x[0-9]+}}, {{x[0-9]+}}, {{w[0-9]+}}, sxtb
%rhs64_sext_shift = shl i64 %rhs64_sext, 4
%res64_sext_shift = add i64 %lhs64, %rhs64_sext_shift
store volatile i64 %res64_sext_shift, i64* @var64
; CHECK: add {{x[0-9]+}}, {{x[0-9]+}}, {{w[0-9]+}}, sxtb #4
; CMP variants
%tst = icmp slt i32 %lhs32, %rhs32_zext
br i1 %tst, label %end, label %test2
; CHECK: cmp {{w[0-9]+}}, {{w[0-9]+}}, uxtb
test2:
%cmp_sext = sext i8 %val8 to i64
%tst2 = icmp eq i64 %lhs64, %cmp_sext
br i1 %tst2, label %other, label %end
; CHECK: cmp {{x[0-9]+}}, {{w[0-9]+}}, sxtb
other:
store volatile i32 %lhs32, i32* @var32
ret void
end:
ret void
}
ARM64: add support for AArch64's addsub_ext.ll There was one definite issue in ARM64 (the off-by-1 check for whether a shift could be folded in) and one difference that is probably correct: ARM64 didn't fold nodes with multiple uses into the arithmetic operations unless optimising for code size. llvm-svn: 206168
2014-04-14 20:50:50 +08:00
define void @addsub_i16rhs() minsize {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: addsub_i16rhs:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%val16_tmp = load i16, i16* @var16
%lhs32 = load i32, i32* @var32
%lhs64 = load i64, i64* @var64
Add AArch64 as an experimental target. This patch adds support for AArch64 (ARM's 64-bit architecture) to LLVM in the "experimental" category. Currently, it won't be built unless requested explicitly. This initial commit should have support for: + Assembly of all scalar (i.e. non-NEON, non-Crypto) instructions (except the late addition CRC instructions). + CodeGen features required for C++03 and C99. + Compilation for the "small" memory model: code+static data < 4GB. + Absolute and position-independent code. + GNU-style (i.e. "__thread") TLS. + Debugging information. The principal omission, currently, is performance tuning. This patch excludes the NEON support also reviewed due to an outbreak of batshit insanity in our legal department. That will be committed soon bringing the changes to precisely what has been approved. Further reviews would be gratefully received. llvm-svn: 174054
2013-01-31 20:12:40 +08:00
; Need this to prevent extension upon load and give a vanilla i16 operand.
%val16 = add i16 %val16_tmp, 123
; Zero-extending to 32-bits
%rhs32_zext = zext i16 %val16 to i32
%res32_zext = add i32 %lhs32, %rhs32_zext
store volatile i32 %res32_zext, i32* @var32
; CHECK: add {{w[0-9]+}}, {{w[0-9]+}}, {{w[0-9]+}}, uxth
%rhs32_zext_shift = shl i32 %rhs32_zext, 3
%res32_zext_shift = add i32 %lhs32, %rhs32_zext_shift
store volatile i32 %res32_zext_shift, i32* @var32
; CHECK: add {{w[0-9]+}}, {{w[0-9]+}}, {{w[0-9]+}}, uxth #3
; Zero-extending to 64-bits
%rhs64_zext = zext i16 %val16 to i64
%res64_zext = add i64 %lhs64, %rhs64_zext
store volatile i64 %res64_zext, i64* @var64
; CHECK: add {{x[0-9]+}}, {{x[0-9]+}}, {{w[0-9]+}}, uxth
%rhs64_zext_shift = shl i64 %rhs64_zext, 1
%res64_zext_shift = add i64 %lhs64, %rhs64_zext_shift
store volatile i64 %res64_zext_shift, i64* @var64
; CHECK: add {{x[0-9]+}}, {{x[0-9]+}}, {{w[0-9]+}}, uxth #1
; Sign-extending to 32-bits
%rhs32_sext = sext i16 %val16 to i32
%res32_sext = add i32 %lhs32, %rhs32_sext
store volatile i32 %res32_sext, i32* @var32
; CHECK: add {{w[0-9]+}}, {{w[0-9]+}}, {{w[0-9]+}}, sxth
%rhs32_sext_shift = shl i32 %rhs32_sext, 1
%res32_sext_shift = add i32 %lhs32, %rhs32_sext_shift
store volatile i32 %res32_sext_shift, i32* @var32
; CHECK: add {{w[0-9]+}}, {{w[0-9]+}}, {{w[0-9]+}}, sxth #1
; Sign-extending to 64-bits
%rhs64_sext = sext i16 %val16 to i64
%res64_sext = add i64 %lhs64, %rhs64_sext
store volatile i64 %res64_sext, i64* @var64
; CHECK: add {{x[0-9]+}}, {{x[0-9]+}}, {{w[0-9]+}}, sxth
%rhs64_sext_shift = shl i64 %rhs64_sext, 4
%res64_sext_shift = add i64 %lhs64, %rhs64_sext_shift
store volatile i64 %res64_sext_shift, i64* @var64
; CHECK: add {{x[0-9]+}}, {{x[0-9]+}}, {{w[0-9]+}}, sxth #4
; CMP variants
%tst = icmp slt i32 %lhs32, %rhs32_zext
br i1 %tst, label %end, label %test2
; CHECK: cmp {{w[0-9]+}}, {{w[0-9]+}}, uxth
test2:
%cmp_sext = sext i16 %val16 to i64
%tst2 = icmp eq i64 %lhs64, %cmp_sext
br i1 %tst2, label %other, label %end
; CHECK: cmp {{x[0-9]+}}, {{w[0-9]+}}, sxth
other:
store volatile i32 %lhs32, i32* @var32
ret void
end:
ret void
}
; N.b. we could probably check more here ("add w2, w3, w1, uxtw" for
; example), but the remaining instructions are probably not idiomatic
; in the face of "add/sub (shifted register)" so I don't intend to.
ARM64: add support for AArch64's addsub_ext.ll There was one definite issue in ARM64 (the off-by-1 check for whether a shift could be folded in) and one difference that is probably correct: ARM64 didn't fold nodes with multiple uses into the arithmetic operations unless optimising for code size. llvm-svn: 206168
2014-04-14 20:50:50 +08:00
define void @addsub_i32rhs() minsize {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: addsub_i32rhs:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%val32_tmp = load i32, i32* @var32
%lhs64 = load i64, i64* @var64
Add AArch64 as an experimental target. This patch adds support for AArch64 (ARM's 64-bit architecture) to LLVM in the "experimental" category. Currently, it won't be built unless requested explicitly. This initial commit should have support for: + Assembly of all scalar (i.e. non-NEON, non-Crypto) instructions (except the late addition CRC instructions). + CodeGen features required for C++03 and C99. + Compilation for the "small" memory model: code+static data < 4GB. + Absolute and position-independent code. + GNU-style (i.e. "__thread") TLS. + Debugging information. The principal omission, currently, is performance tuning. This patch excludes the NEON support also reviewed due to an outbreak of batshit insanity in our legal department. That will be committed soon bringing the changes to precisely what has been approved. Further reviews would be gratefully received. llvm-svn: 174054
2013-01-31 20:12:40 +08:00
%val32 = add i32 %val32_tmp, 123
%rhs64_zext = zext i32 %val32 to i64
%res64_zext = add i64 %lhs64, %rhs64_zext
store volatile i64 %res64_zext, i64* @var64
; CHECK: add {{x[0-9]+}}, {{x[0-9]+}}, {{w[0-9]+}}, uxtw
%rhs64_zext_shift = shl i64 %rhs64_zext, 2
%res64_zext_shift = add i64 %lhs64, %rhs64_zext_shift
store volatile i64 %res64_zext_shift, i64* @var64
; CHECK: add {{x[0-9]+}}, {{x[0-9]+}}, {{w[0-9]+}}, uxtw #2
%rhs64_sext = sext i32 %val32 to i64
%res64_sext = add i64 %lhs64, %rhs64_sext
store volatile i64 %res64_sext, i64* @var64
; CHECK: add {{x[0-9]+}}, {{x[0-9]+}}, {{w[0-9]+}}, sxtw
%rhs64_sext_shift = shl i64 %rhs64_sext, 2
%res64_sext_shift = add i64 %lhs64, %rhs64_sext_shift
store volatile i64 %res64_sext_shift, i64* @var64
; CHECK: add {{x[0-9]+}}, {{x[0-9]+}}, {{w[0-9]+}}, sxtw #2
ret void
Convert CodeGen/*/*.ll tests to use the new CHECK-LABEL for easier debugging. No functionality change and all tests pass after conversion. This was done with the following sed invocation to catch label lines demarking function boundaries: sed -i '' "s/^;\( *\)\([A-Z0-9_]*\):\( *\)test\([A-Za-z0-9_-]*\):\( *\)$/;\1\2-LABEL:\3test\4:\5/g" test/CodeGen/*/*.ll which was written conservatively to avoid false positives rather than false negatives. I scanned through all the changes and everything looks correct. llvm-svn: 186258
2013-07-14 04:38:47 +08:00
}