llvm-project/llvm/test/CodeGen/AMDGPU/fma-combine.ll

618 lines
31 KiB
LLVM
Raw Normal View History

; RUN: llc -march=amdgcn -mcpu=tahiti -verify-machineinstrs -fp-contract=fast < %s | FileCheck -check-prefix=SI-NOFMA -check-prefix=SI -check-prefix=FUNC %s
; RUN: llc -march=amdgcn -mcpu=verde -verify-machineinstrs -fp-contract=fast < %s | FileCheck -check-prefix=SI-NOFMA -check-prefix=SI -check-prefix=FUNC %s
; RUN: llc -march=amdgcn -mcpu=tahiti -verify-machineinstrs -fp-contract=fast -enable-no-infs-fp-math -mattr=+fp32-denormals < %s | FileCheck -check-prefix=SI-FMA -check-prefix=SI -check-prefix=FUNC %s
; Note: The SI-FMA conversions of type x * (y + 1) --> x * y + x would be
; beneficial even without fp32 denormals, but they do require no-infs-fp-math
; for correctness.
declare i32 @llvm.amdgcn.workitem.id.x() #0
declare double @llvm.fabs.f64(double) #0
declare double @llvm.fma.f64(double, double, double) #0
declare float @llvm.fma.f32(float, float, float) #0
; (fadd (fmul x, y), z) -> (fma x, y, z)
; FUNC-LABEL: {{^}}combine_to_fma_f64_0:
; SI-DAG: buffer_load_dwordx2 [[A:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_load_dwordx2 [[B:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI-DAG: buffer_load_dwordx2 [[C:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:16{{$}}
; SI: v_fma_f64 [[RESULT:v\[[0-9]+:[0-9]+\]]], [[A]], [[B]], [[C]]
; SI: buffer_store_dwordx2 [[RESULT]]
define void @combine_to_fma_f64_0(double addrspace(1)* noalias %out, double addrspace(1)* noalias %in) #1 {
%tid = tail call i32 @llvm.amdgcn.workitem.id.x() #0
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep.0 = getelementptr double, double addrspace(1)* %in, i32 %tid
%gep.1 = getelementptr double, double addrspace(1)* %gep.0, i32 1
%gep.2 = getelementptr double, double addrspace(1)* %gep.0, i32 2
%gep.out = getelementptr double, double addrspace(1)* %out, i32 %tid
%a = load volatile double, double addrspace(1)* %gep.0
%b = load volatile double, double addrspace(1)* %gep.1
%c = load volatile double, double addrspace(1)* %gep.2
%mul = fmul double %a, %b
%fma = fadd double %mul, %c
store double %fma, double addrspace(1)* %gep.out
ret void
}
; (fadd (fmul x, y), z) -> (fma x, y, z)
; FUNC-LABEL: {{^}}combine_to_fma_f64_0_2use:
; SI-DAG: buffer_load_dwordx2 [[A:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_load_dwordx2 [[B:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI-DAG: buffer_load_dwordx2 [[C:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:16{{$}}
; SI-DAG: buffer_load_dwordx2 [[D:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:24{{$}}
; SI-DAG: v_fma_f64 [[RESULT0:v\[[0-9]+:[0-9]+\]]], [[A]], [[B]], [[C]]
; SI-DAG: v_fma_f64 [[RESULT1:v\[[0-9]+:[0-9]+\]]], [[A]], [[B]], [[D]]
; SI-DAG: buffer_store_dwordx2 [[RESULT0]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_store_dwordx2 [[RESULT1]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI: s_endpgm
define void @combine_to_fma_f64_0_2use(double addrspace(1)* noalias %out, double addrspace(1)* noalias %in) #1 {
%tid = tail call i32 @llvm.amdgcn.workitem.id.x() #0
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep.0 = getelementptr double, double addrspace(1)* %in, i32 %tid
%gep.1 = getelementptr double, double addrspace(1)* %gep.0, i32 1
%gep.2 = getelementptr double, double addrspace(1)* %gep.0, i32 2
%gep.3 = getelementptr double, double addrspace(1)* %gep.0, i32 3
%gep.out.0 = getelementptr double, double addrspace(1)* %out, i32 %tid
%gep.out.1 = getelementptr double, double addrspace(1)* %gep.out.0, i32 1
%a = load volatile double, double addrspace(1)* %gep.0
%b = load volatile double, double addrspace(1)* %gep.1
%c = load volatile double, double addrspace(1)* %gep.2
%d = load volatile double, double addrspace(1)* %gep.3
%mul = fmul double %a, %b
%fma0 = fadd double %mul, %c
%fma1 = fadd double %mul, %d
store volatile double %fma0, double addrspace(1)* %gep.out.0
store volatile double %fma1, double addrspace(1)* %gep.out.1
ret void
}
; (fadd x, (fmul y, z)) -> (fma y, z, x)
; FUNC-LABEL: {{^}}combine_to_fma_f64_1:
; SI-DAG: buffer_load_dwordx2 [[A:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_load_dwordx2 [[B:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI-DAG: buffer_load_dwordx2 [[C:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:16{{$}}
; SI: v_fma_f64 [[RESULT:v\[[0-9]+:[0-9]+\]]], [[A]], [[B]], [[C]]
; SI: buffer_store_dwordx2 [[RESULT]]
define void @combine_to_fma_f64_1(double addrspace(1)* noalias %out, double addrspace(1)* noalias %in) #1 {
%tid = tail call i32 @llvm.amdgcn.workitem.id.x() #0
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep.0 = getelementptr double, double addrspace(1)* %in, i32 %tid
%gep.1 = getelementptr double, double addrspace(1)* %gep.0, i32 1
%gep.2 = getelementptr double, double addrspace(1)* %gep.0, i32 2
%gep.out = getelementptr double, double addrspace(1)* %out, i32 %tid
%a = load volatile double, double addrspace(1)* %gep.0
%b = load volatile double, double addrspace(1)* %gep.1
%c = load volatile double, double addrspace(1)* %gep.2
%mul = fmul double %a, %b
%fma = fadd double %c, %mul
store double %fma, double addrspace(1)* %gep.out
ret void
}
; (fsub (fmul x, y), z) -> (fma x, y, (fneg z))
; FUNC-LABEL: {{^}}combine_to_fma_fsub_0_f64:
; SI-DAG: buffer_load_dwordx2 [[A:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_load_dwordx2 [[B:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI-DAG: buffer_load_dwordx2 [[C:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:16{{$}}
; SI: v_fma_f64 [[RESULT:v\[[0-9]+:[0-9]+\]]], [[A]], [[B]], -[[C]]
; SI: buffer_store_dwordx2 [[RESULT]]
define void @combine_to_fma_fsub_0_f64(double addrspace(1)* noalias %out, double addrspace(1)* noalias %in) #1 {
%tid = tail call i32 @llvm.amdgcn.workitem.id.x() #0
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep.0 = getelementptr double, double addrspace(1)* %in, i32 %tid
%gep.1 = getelementptr double, double addrspace(1)* %gep.0, i32 1
%gep.2 = getelementptr double, double addrspace(1)* %gep.0, i32 2
%gep.out = getelementptr double, double addrspace(1)* %out, i32 %tid
%a = load volatile double, double addrspace(1)* %gep.0
%b = load volatile double, double addrspace(1)* %gep.1
%c = load volatile double, double addrspace(1)* %gep.2
%mul = fmul double %a, %b
%fma = fsub double %mul, %c
store double %fma, double addrspace(1)* %gep.out
ret void
}
; (fsub (fmul x, y), z) -> (fma x, y, (fneg z))
; FUNC-LABEL: {{^}}combine_to_fma_fsub_f64_0_2use:
; SI-DAG: buffer_load_dwordx2 [[A:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_load_dwordx2 [[B:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI-DAG: buffer_load_dwordx2 [[C:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:16{{$}}
; SI-DAG: buffer_load_dwordx2 [[D:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:24{{$}}
; SI-DAG: v_fma_f64 [[RESULT0:v\[[0-9]+:[0-9]+\]]], [[A]], [[B]], -[[C]]
; SI-DAG: v_fma_f64 [[RESULT1:v\[[0-9]+:[0-9]+\]]], [[A]], [[B]], -[[D]]
; SI-DAG: buffer_store_dwordx2 [[RESULT0]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_store_dwordx2 [[RESULT1]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI: s_endpgm
define void @combine_to_fma_fsub_f64_0_2use(double addrspace(1)* noalias %out, double addrspace(1)* noalias %in) #1 {
%tid = tail call i32 @llvm.amdgcn.workitem.id.x() #0
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep.0 = getelementptr double, double addrspace(1)* %in, i32 %tid
%gep.1 = getelementptr double, double addrspace(1)* %gep.0, i32 1
%gep.2 = getelementptr double, double addrspace(1)* %gep.0, i32 2
%gep.3 = getelementptr double, double addrspace(1)* %gep.0, i32 3
%gep.out.0 = getelementptr double, double addrspace(1)* %out, i32 %tid
%gep.out.1 = getelementptr double, double addrspace(1)* %gep.out.0, i32 1
%a = load volatile double, double addrspace(1)* %gep.0
%b = load volatile double, double addrspace(1)* %gep.1
%c = load volatile double, double addrspace(1)* %gep.2
%d = load volatile double, double addrspace(1)* %gep.3
%mul = fmul double %a, %b
%fma0 = fsub double %mul, %c
%fma1 = fsub double %mul, %d
store volatile double %fma0, double addrspace(1)* %gep.out.0
store volatile double %fma1, double addrspace(1)* %gep.out.1
ret void
}
; (fsub x, (fmul y, z)) -> (fma (fneg y), z, x)
; FUNC-LABEL: {{^}}combine_to_fma_fsub_1_f64:
; SI-DAG: buffer_load_dwordx2 [[A:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_load_dwordx2 [[B:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI-DAG: buffer_load_dwordx2 [[C:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:16{{$}}
; SI: v_fma_f64 [[RESULT:v\[[0-9]+:[0-9]+\]]], -[[A]], [[B]], [[C]]
; SI: buffer_store_dwordx2 [[RESULT]]
define void @combine_to_fma_fsub_1_f64(double addrspace(1)* noalias %out, double addrspace(1)* noalias %in) #1 {
%tid = tail call i32 @llvm.amdgcn.workitem.id.x() #0
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep.0 = getelementptr double, double addrspace(1)* %in, i32 %tid
%gep.1 = getelementptr double, double addrspace(1)* %gep.0, i32 1
%gep.2 = getelementptr double, double addrspace(1)* %gep.0, i32 2
%gep.out = getelementptr double, double addrspace(1)* %out, i32 %tid
%a = load volatile double, double addrspace(1)* %gep.0
%b = load volatile double, double addrspace(1)* %gep.1
%c = load volatile double, double addrspace(1)* %gep.2
%mul = fmul double %a, %b
%fma = fsub double %c, %mul
store double %fma, double addrspace(1)* %gep.out
ret void
}
; (fsub x, (fmul y, z)) -> (fma (fneg y), z, x)
; FUNC-LABEL: {{^}}combine_to_fma_fsub_1_f64_2use:
; SI-DAG: buffer_load_dwordx2 [[A:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_load_dwordx2 [[B:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI-DAG: buffer_load_dwordx2 [[C:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:16{{$}}
; SI-DAG: buffer_load_dwordx2 [[D:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:24{{$}}
; SI-DAG: v_fma_f64 [[RESULT0:v\[[0-9]+:[0-9]+\]]], -[[A]], [[B]], [[C]]
; SI-DAG: v_fma_f64 [[RESULT1:v\[[0-9]+:[0-9]+\]]], -[[A]], [[B]], [[D]]
; SI-DAG: buffer_store_dwordx2 [[RESULT0]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_store_dwordx2 [[RESULT1]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI: s_endpgm
define void @combine_to_fma_fsub_1_f64_2use(double addrspace(1)* noalias %out, double addrspace(1)* noalias %in) #1 {
%tid = tail call i32 @llvm.amdgcn.workitem.id.x() #0
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep.0 = getelementptr double, double addrspace(1)* %in, i32 %tid
%gep.1 = getelementptr double, double addrspace(1)* %gep.0, i32 1
%gep.2 = getelementptr double, double addrspace(1)* %gep.0, i32 2
%gep.3 = getelementptr double, double addrspace(1)* %gep.0, i32 3
%gep.out.0 = getelementptr double, double addrspace(1)* %out, i32 %tid
%gep.out.1 = getelementptr double, double addrspace(1)* %gep.out.0, i32 1
%a = load volatile double, double addrspace(1)* %gep.0
%b = load volatile double, double addrspace(1)* %gep.1
%c = load volatile double, double addrspace(1)* %gep.2
%d = load volatile double, double addrspace(1)* %gep.3
%mul = fmul double %a, %b
%fma0 = fsub double %c, %mul
%fma1 = fsub double %d, %mul
store volatile double %fma0, double addrspace(1)* %gep.out.0
store volatile double %fma1, double addrspace(1)* %gep.out.1
ret void
}
; (fsub (fneg (fmul x, y)), z) -> (fma (fneg x), y, (fneg z))
; FUNC-LABEL: {{^}}combine_to_fma_fsub_2_f64:
; SI-DAG: buffer_load_dwordx2 [[A:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_load_dwordx2 [[B:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI-DAG: buffer_load_dwordx2 [[C:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:16{{$}}
; SI: v_fma_f64 [[RESULT:v\[[0-9]+:[0-9]+\]]], -[[A]], [[B]], -[[C]]
; SI: buffer_store_dwordx2 [[RESULT]]
define void @combine_to_fma_fsub_2_f64(double addrspace(1)* noalias %out, double addrspace(1)* noalias %in) #1 {
%tid = tail call i32 @llvm.amdgcn.workitem.id.x() #0
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep.0 = getelementptr double, double addrspace(1)* %in, i32 %tid
%gep.1 = getelementptr double, double addrspace(1)* %gep.0, i32 1
%gep.2 = getelementptr double, double addrspace(1)* %gep.0, i32 2
%gep.out = getelementptr double, double addrspace(1)* %out, i32 %tid
%a = load volatile double, double addrspace(1)* %gep.0
%b = load volatile double, double addrspace(1)* %gep.1
%c = load volatile double, double addrspace(1)* %gep.2
%mul = fmul double %a, %b
%mul.neg = fsub double -0.0, %mul
%fma = fsub double %mul.neg, %c
store double %fma, double addrspace(1)* %gep.out
ret void
}
; (fsub (fneg (fmul x, y)), z) -> (fma (fneg x), y, (fneg z))
; FUNC-LABEL: {{^}}combine_to_fma_fsub_2_f64_2uses_neg:
; SI-DAG: buffer_load_dwordx2 [[A:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_load_dwordx2 [[B:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI-DAG: buffer_load_dwordx2 [[C:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:16{{$}}
; SI-DAG: v_fma_f64 [[RESULT0:v\[[0-9]+:[0-9]+\]]], -[[A]], [[B]], -[[C]]
; SI-DAG: v_fma_f64 [[RESULT1:v\[[0-9]+:[0-9]+\]]], -[[A]], [[B]], -[[D]]
; SI-DAG: buffer_store_dwordx2 [[RESULT0]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_store_dwordx2 [[RESULT1]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI: s_endpgm
define void @combine_to_fma_fsub_2_f64_2uses_neg(double addrspace(1)* noalias %out, double addrspace(1)* noalias %in) #1 {
%tid = tail call i32 @llvm.amdgcn.workitem.id.x() #0
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep.0 = getelementptr double, double addrspace(1)* %in, i32 %tid
%gep.1 = getelementptr double, double addrspace(1)* %gep.0, i32 1
%gep.2 = getelementptr double, double addrspace(1)* %gep.0, i32 2
%gep.3 = getelementptr double, double addrspace(1)* %gep.0, i32 3
%gep.out.0 = getelementptr double, double addrspace(1)* %out, i32 %tid
%gep.out.1 = getelementptr double, double addrspace(1)* %gep.out.0, i32 1
%a = load volatile double, double addrspace(1)* %gep.0
%b = load volatile double, double addrspace(1)* %gep.1
%c = load volatile double, double addrspace(1)* %gep.2
%d = load volatile double, double addrspace(1)* %gep.3
%mul = fmul double %a, %b
%mul.neg = fsub double -0.0, %mul
%fma0 = fsub double %mul.neg, %c
%fma1 = fsub double %mul.neg, %d
store volatile double %fma0, double addrspace(1)* %gep.out.0
store volatile double %fma1, double addrspace(1)* %gep.out.1
ret void
}
; (fsub (fneg (fmul x, y)), z) -> (fma (fneg x), y, (fneg z))
; FUNC-LABEL: {{^}}combine_to_fma_fsub_2_f64_2uses_mul:
; SI-DAG: buffer_load_dwordx2 [[A:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_load_dwordx2 [[B:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI-DAG: buffer_load_dwordx2 [[C:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:16{{$}}
; SI-DAG: v_fma_f64 [[RESULT0:v\[[0-9]+:[0-9]+\]]], -[[A]], [[B]], -[[C]]
; SI-DAG: v_fma_f64 [[RESULT1:v\[[0-9]+:[0-9]+\]]], [[A]], [[B]], -[[D]]
; SI-DAG: buffer_store_dwordx2 [[RESULT0]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_store_dwordx2 [[RESULT1]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI: s_endpgm
define void @combine_to_fma_fsub_2_f64_2uses_mul(double addrspace(1)* noalias %out, double addrspace(1)* noalias %in) #1 {
%tid = tail call i32 @llvm.amdgcn.workitem.id.x() #0
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep.0 = getelementptr double, double addrspace(1)* %in, i32 %tid
%gep.1 = getelementptr double, double addrspace(1)* %gep.0, i32 1
%gep.2 = getelementptr double, double addrspace(1)* %gep.0, i32 2
%gep.3 = getelementptr double, double addrspace(1)* %gep.0, i32 3
%gep.out.0 = getelementptr double, double addrspace(1)* %out, i32 %tid
%gep.out.1 = getelementptr double, double addrspace(1)* %gep.out.0, i32 1
%a = load volatile double, double addrspace(1)* %gep.0
%b = load volatile double, double addrspace(1)* %gep.1
%c = load volatile double, double addrspace(1)* %gep.2
%d = load volatile double, double addrspace(1)* %gep.3
%mul = fmul double %a, %b
%mul.neg = fsub double -0.0, %mul
%fma0 = fsub double %mul.neg, %c
%fma1 = fsub double %mul, %d
store volatile double %fma0, double addrspace(1)* %gep.out.0
store volatile double %fma1, double addrspace(1)* %gep.out.1
ret void
}
; fold (fsub (fma x, y, (fmul u, v)), z) -> (fma x, y (fma u, v, (fneg z)))
; FUNC-LABEL: {{^}}aggressive_combine_to_fma_fsub_0_f64:
; SI-DAG: buffer_load_dwordx2 [[X:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_load_dwordx2 [[Y:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI-DAG: buffer_load_dwordx2 [[Z:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:16{{$}}
; SI-DAG: buffer_load_dwordx2 [[U:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:24{{$}}
; SI-DAG: buffer_load_dwordx2 [[V:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:32{{$}}
; SI: v_fma_f64 [[FMA0:v\[[0-9]+:[0-9]+\]]], [[U]], [[V]], -[[Z]]
; SI: v_fma_f64 [[RESULT:v\[[0-9]+:[0-9]+\]]], [[X]], [[Y]], [[FMA0]]
; SI: buffer_store_dwordx2 [[RESULT]]
define void @aggressive_combine_to_fma_fsub_0_f64(double addrspace(1)* noalias %out, double addrspace(1)* noalias %in) #1 {
%tid = tail call i32 @llvm.amdgcn.workitem.id.x() #0
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep.0 = getelementptr double, double addrspace(1)* %in, i32 %tid
%gep.1 = getelementptr double, double addrspace(1)* %gep.0, i32 1
%gep.2 = getelementptr double, double addrspace(1)* %gep.0, i32 2
%gep.3 = getelementptr double, double addrspace(1)* %gep.0, i32 3
%gep.4 = getelementptr double, double addrspace(1)* %gep.0, i32 4
%gep.out = getelementptr double, double addrspace(1)* %out, i32 %tid
%x = load volatile double, double addrspace(1)* %gep.0
%y = load volatile double, double addrspace(1)* %gep.1
%z = load volatile double, double addrspace(1)* %gep.2
%u = load volatile double, double addrspace(1)* %gep.3
%v = load volatile double, double addrspace(1)* %gep.4
%tmp0 = fmul double %u, %v
%tmp1 = call double @llvm.fma.f64(double %x, double %y, double %tmp0) #0
%tmp2 = fsub double %tmp1, %z
store double %tmp2, double addrspace(1)* %gep.out
ret void
}
; fold (fsub x, (fma y, z, (fmul u, v)))
; -> (fma (fneg y), z, (fma (fneg u), v, x))
; FUNC-LABEL: {{^}}aggressive_combine_to_fma_fsub_1_f64:
; SI-DAG: buffer_load_dwordx2 [[X:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64{{$}}
; SI-DAG: buffer_load_dwordx2 [[Y:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:8{{$}}
; SI-DAG: buffer_load_dwordx2 [[Z:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:16{{$}}
; SI-DAG: buffer_load_dwordx2 [[U:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:24{{$}}
; SI-DAG: buffer_load_dwordx2 [[V:v\[[0-9]+:[0-9]+\]]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:32{{$}}
; SI: v_fma_f64 [[FMA0:v\[[0-9]+:[0-9]+\]]], -[[U]], [[V]], [[X]]
; SI: v_fma_f64 [[RESULT:v\[[0-9]+:[0-9]+\]]], -[[Y]], [[Z]], [[FMA0]]
; SI: buffer_store_dwordx2 [[RESULT]]
define void @aggressive_combine_to_fma_fsub_1_f64(double addrspace(1)* noalias %out, double addrspace(1)* noalias %in) #1 {
%tid = tail call i32 @llvm.amdgcn.workitem.id.x() #0
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%gep.0 = getelementptr double, double addrspace(1)* %in, i32 %tid
%gep.1 = getelementptr double, double addrspace(1)* %gep.0, i32 1
%gep.2 = getelementptr double, double addrspace(1)* %gep.0, i32 2
%gep.3 = getelementptr double, double addrspace(1)* %gep.0, i32 3
%gep.4 = getelementptr double, double addrspace(1)* %gep.0, i32 4
%gep.out = getelementptr double, double addrspace(1)* %out, i32 %tid
%x = load volatile double, double addrspace(1)* %gep.0
%y = load volatile double, double addrspace(1)* %gep.1
%z = load volatile double, double addrspace(1)* %gep.2
%u = load volatile double, double addrspace(1)* %gep.3
%v = load volatile double, double addrspace(1)* %gep.4
%tmp0 = fmul double %u, %v
%tmp1 = call double @llvm.fma.f64(double %y, double %z, double %tmp0) #0
%tmp2 = fsub double %x, %tmp1
store double %tmp2, double addrspace(1)* %gep.out
ret void
}
;
; Patterns (+ fneg variants): mul(add(1.0,x),y), mul(sub(1.0,x),y), mul(sub(x,1.0),y)
;
; FUNC-LABEL: {{^}}test_f32_mul_add_x_one_y:
; SI-NOFMA: v_add_f32_e32 [[VS:v[0-9]]], 1.0, [[VX:v[0-9]]]
; SI-NOFMA: v_mul_f32_e32 {{v[0-9]}}, [[VY:v[0-9]]], [[VS]]
;
; SI-FMA: v_fma_f32 {{v[0-9]}}, [[VX:v[0-9]]], [[VY:v[0-9]]], [[VY:v[0-9]]]
define void @test_f32_mul_add_x_one_y(float addrspace(1)* %out,
float addrspace(1)* %in1,
float addrspace(1)* %in2) {
%x = load volatile float, float addrspace(1)* %in1
%y = load volatile float, float addrspace(1)* %in2
%a = fadd float %x, 1.0
%m = fmul float %a, %y
store float %m, float addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}test_f32_mul_y_add_x_one:
; SI-NOFMA: v_add_f32_e32 [[VS:v[0-9]]], 1.0, [[VX:v[0-9]]]
; SI-NOFMA: v_mul_f32_e32 {{v[0-9]}}, [[VS]], [[VY:v[0-9]]]
;
; SI-FMA: v_fma_f32 {{v[0-9]}}, [[VX:v[0-9]]], [[VY:v[0-9]]], [[VY:v[0-9]]]
define void @test_f32_mul_y_add_x_one(float addrspace(1)* %out,
float addrspace(1)* %in1,
float addrspace(1)* %in2) {
%x = load volatile float, float addrspace(1)* %in1
%y = load volatile float, float addrspace(1)* %in2
%a = fadd float %x, 1.0
%m = fmul float %y, %a
store float %m, float addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}test_f32_mul_add_x_negone_y:
; SI-NOFMA: v_add_f32_e32 [[VS:v[0-9]]], -1.0, [[VX:v[0-9]]]
; SI-NOFMA: v_mul_f32_e32 {{v[0-9]}}, [[VY:v[0-9]]], [[VS]]
;
; SI-FMA: v_fma_f32 {{v[0-9]}}, [[VX:v[0-9]]], [[VY:v[0-9]]], -[[VY:v[0-9]]]
define void @test_f32_mul_add_x_negone_y(float addrspace(1)* %out,
float addrspace(1)* %in1,
float addrspace(1)* %in2) {
%x = load float, float addrspace(1)* %in1
%y = load float, float addrspace(1)* %in2
%a = fadd float %x, -1.0
%m = fmul float %a, %y
store float %m, float addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}test_f32_mul_y_add_x_negone:
; SI-NOFMA: v_add_f32_e32 [[VS:v[0-9]]], -1.0, [[VX:v[0-9]]]
; SI-NOFMA: v_mul_f32_e32 {{v[0-9]}}, [[VS]], [[VY:v[0-9]]]
;
; SI-FMA: v_fma_f32 {{v[0-9]}}, [[VX:v[0-9]]], [[VY:v[0-9]]], -[[VY:v[0-9]]]
define void @test_f32_mul_y_add_x_negone(float addrspace(1)* %out,
float addrspace(1)* %in1,
float addrspace(1)* %in2) {
%x = load float, float addrspace(1)* %in1
%y = load float, float addrspace(1)* %in2
%a = fadd float %x, -1.0
%m = fmul float %y, %a
store float %m, float addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}test_f32_mul_sub_one_x_y:
; SI-NOFMA: v_sub_f32_e32 [[VS:v[0-9]]], 1.0, [[VX:v[0-9]]]
; SI-NOFMA: v_mul_f32_e32 {{v[0-9]}}, [[VY:v[0-9]]], [[VS]]
;
; SI-FMA: v_fma_f32 {{v[0-9]}}, -[[VX:v[0-9]]], [[VY:v[0-9]]], [[VY:v[0-9]]]
define void @test_f32_mul_sub_one_x_y(float addrspace(1)* %out,
float addrspace(1)* %in1,
float addrspace(1)* %in2) {
%x = load float, float addrspace(1)* %in1
%y = load float, float addrspace(1)* %in2
%s = fsub float 1.0, %x
%m = fmul float %s, %y
store float %m, float addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}test_f32_mul_y_sub_one_x:
; SI-NOFMA: v_sub_f32_e32 [[VS:v[0-9]]], 1.0, [[VX:v[0-9]]]
; SI-NOFMA: v_mul_f32_e32 {{v[0-9]}}, [[VS]], [[VY:v[0-9]]]
;
; SI-FMA: v_fma_f32 {{v[0-9]}}, -[[VX:v[0-9]]], [[VY:v[0-9]]], [[VY:v[0-9]]]
define void @test_f32_mul_y_sub_one_x(float addrspace(1)* %out,
float addrspace(1)* %in1,
float addrspace(1)* %in2) {
%x = load float, float addrspace(1)* %in1
%y = load float, float addrspace(1)* %in2
%s = fsub float 1.0, %x
%m = fmul float %y, %s
store float %m, float addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}test_f32_mul_sub_negone_x_y:
; SI-NOFMA: v_sub_f32_e32 [[VS:v[0-9]]], -1.0, [[VX:v[0-9]]]
; SI-NOFMA: v_mul_f32_e32 {{v[0-9]}}, [[VY:v[0-9]]], [[VS]]
;
; SI-FMA: v_fma_f32 {{v[0-9]}}, -[[VX:v[0-9]]], [[VY:v[0-9]]], -[[VY:v[0-9]]]
define void @test_f32_mul_sub_negone_x_y(float addrspace(1)* %out,
float addrspace(1)* %in1,
float addrspace(1)* %in2) {
%x = load float, float addrspace(1)* %in1
%y = load float, float addrspace(1)* %in2
%s = fsub float -1.0, %x
%m = fmul float %s, %y
store float %m, float addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}test_f32_mul_y_sub_negone_x:
; SI-NOFMA: v_sub_f32_e32 [[VS:v[0-9]]], -1.0, [[VX:v[0-9]]]
; SI-NOFMA: v_mul_f32_e32 {{v[0-9]}}, [[VS]], [[VY:v[0-9]]]
;
; SI-FMA: v_fma_f32 {{v[0-9]}}, -[[VX:v[0-9]]], [[VY:v[0-9]]], -[[VY:v[0-9]]]
define void @test_f32_mul_y_sub_negone_x(float addrspace(1)* %out,
float addrspace(1)* %in1,
float addrspace(1)* %in2) {
%x = load float, float addrspace(1)* %in1
%y = load float, float addrspace(1)* %in2
%s = fsub float -1.0, %x
%m = fmul float %y, %s
store float %m, float addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}test_f32_mul_sub_x_one_y:
; SI-NOFMA: v_add_f32_e32 [[VS:v[0-9]]], -1.0, [[VX:v[0-9]]]
; SI-NOFMA: v_mul_f32_e32 {{v[0-9]}}, [[VY:v[0-9]]], [[VS]]
;
; SI-FMA: v_fma_f32 {{v[0-9]}}, [[VX:v[0-9]]], [[VY:v[0-9]]], -[[VY:v[0-9]]]
define void @test_f32_mul_sub_x_one_y(float addrspace(1)* %out,
float addrspace(1)* %in1,
float addrspace(1)* %in2) {
%x = load float, float addrspace(1)* %in1
%y = load float, float addrspace(1)* %in2
%s = fsub float %x, 1.0
%m = fmul float %s, %y
store float %m, float addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}test_f32_mul_y_sub_x_one:
; SI-NOFMA: v_add_f32_e32 [[VS:v[0-9]]], -1.0, [[VX:v[0-9]]]
; SI-NOFMA: v_mul_f32_e32 {{v[0-9]}}, [[VS]], [[VY:v[0-9]]]
;
; SI-FMA: v_fma_f32 {{v[0-9]}}, [[VX:v[0-9]]], [[VY:v[0-9]]], -[[VY:v[0-9]]]
define void @test_f32_mul_y_sub_x_one(float addrspace(1)* %out,
float addrspace(1)* %in1,
float addrspace(1)* %in2) {
%x = load float, float addrspace(1)* %in1
%y = load float, float addrspace(1)* %in2
%s = fsub float %x, 1.0
%m = fmul float %y, %s
store float %m, float addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}test_f32_mul_sub_x_negone_y:
; SI-NOFMA: v_add_f32_e32 [[VS:v[0-9]]], 1.0, [[VX:v[0-9]]]
; SI-NOFMA: v_mul_f32_e32 {{v[0-9]}}, [[VY:v[0-9]]], [[VS]]
;
; SI-FMA: v_fma_f32 {{v[0-9]}}, [[VX:v[0-9]]], [[VY:v[0-9]]], [[VY:v[0-9]]]
define void @test_f32_mul_sub_x_negone_y(float addrspace(1)* %out,
float addrspace(1)* %in1,
float addrspace(1)* %in2) {
%x = load float, float addrspace(1)* %in1
%y = load float, float addrspace(1)* %in2
%s = fsub float %x, -1.0
%m = fmul float %s, %y
store float %m, float addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}test_f32_mul_y_sub_x_negone:
; SI-NOFMA: v_add_f32_e32 [[VS:v[0-9]]], 1.0, [[VX:v[0-9]]]
; SI-NOFMA: v_mul_f32_e32 {{v[0-9]}}, [[VS]], [[VY:v[0-9]]]
;
; SI-FMA: v_fma_f32 {{v[0-9]}}, [[VX:v[0-9]]], [[VY:v[0-9]]], [[VY:v[0-9]]]
define void @test_f32_mul_y_sub_x_negone(float addrspace(1)* %out,
float addrspace(1)* %in1,
float addrspace(1)* %in2) {
%x = load float, float addrspace(1)* %in1
%y = load float, float addrspace(1)* %in2
%s = fsub float %x, -1.0
%m = fmul float %y, %s
store float %m, float addrspace(1)* %out
ret void
}
;
; Interpolation Patterns: add(mul(x,t),mul(sub(1.0,t),y))
;
; FUNC-LABEL: {{^}}test_f32_interp:
; SI-NOFMA: v_sub_f32_e32 [[VT1:v[0-9]]], 1.0, [[VT:v[0-9]]]
; SI-NOFMA: v_mul_f32_e32 [[VTY:v[0-9]]], [[VT1]], [[VY:v[0-9]]]
; SI-NOFMA: v_mac_f32_e32 [[VTY]], [[VT]], [[VX:v[0-9]]]
;
; SI-FMA: v_fma_f32 [[VR:v[0-9]]], -[[VT:v[0-9]]], [[VY:v[0-9]]], [[VY]]
; SI-FMA: v_fma_f32 {{v[0-9]}}, [[VX:v[0-9]]], [[VT]], [[VR]]
define void @test_f32_interp(float addrspace(1)* %out,
float addrspace(1)* %in1,
float addrspace(1)* %in2,
float addrspace(1)* %in3) {
%x = load float, float addrspace(1)* %in1
%y = load float, float addrspace(1)* %in2
%t = load float, float addrspace(1)* %in3
%t1 = fsub float 1.0, %t
%tx = fmul float %x, %t
%ty = fmul float %y, %t1
%r = fadd float %tx, %ty
store float %r, float addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}test_f64_interp:
; SI-NOFMA: v_add_f64 [[VT1:v\[[0-9]+:[0-9]+\]]], -[[VT:v\[[0-9]+:[0-9]+\]]], 1.0
; SI-NOFMA: v_mul_f64 [[VTY:v\[[0-9]+:[0-9]+\]]], [[VY:v\[[0-9]+:[0-9]+\]]], [[VT1]]
; SI-NOFMA: v_fma_f64 v{{\[[0-9]+:[0-9]+\]}}, [[VX:v\[[0-9]+:[0-9]+\]]], [[VT]], [[VTY]]
;
; SI-FMA: v_fma_f64 [[VR:v\[[0-9]+:[0-9]+\]]], -[[VT:v\[[0-9]+:[0-9]+\]]], [[VY:v\[[0-9]+:[0-9]+\]]], [[VY]]
; SI-FMA: v_fma_f64 v{{\[[0-9]+:[0-9]+\]}}, [[VX:v\[[0-9]+:[0-9]+\]]], [[VT]], [[VR]]
define void @test_f64_interp(double addrspace(1)* %out,
double addrspace(1)* %in1,
double addrspace(1)* %in2,
double addrspace(1)* %in3) {
%x = load double, double addrspace(1)* %in1
%y = load double, double addrspace(1)* %in2
%t = load double, double addrspace(1)* %in3
%t1 = fsub double 1.0, %t
%tx = fmul double %x, %t
%ty = fmul double %y, %t1
%r = fadd double %tx, %ty
store double %r, double addrspace(1)* %out
ret void
}
attributes #0 = { nounwind readnone }
attributes #1 = { nounwind }