maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/DebugInfo/X86/array.ll

102 lines
5.1 KiB
LLVM
Raw Normal View History

This reapplies r207235 with an additional bugfixes caught by the msan buildbot - do not insert debug intrinsics before phi nodes. Debug info for optimized code: Support variables that are on the stack and described by DBG_VALUEs during their lifetime. Previously, when a variable was at a FrameIndex for any part of its lifetime, this would shadow all other DBG_VALUEs and only a single fbreg location would be emitted, which in fact is only valid for a small range and not the entire lexical scope of the variable. The included dbg-value-const-byref testcase demonstrates this. This patch fixes this by Local - emitting dbg.value intrinsics for allocas that are passed by reference - dropping all dbg.declares (they are now fully lowered to dbg.values) SelectionDAG - renamed constructors for SDDbgValue for better readability. - fix UserValue::match() to handle indirect values correctly - not inserting an MMI table entries for dbg.values that describe allocas. - lowering dbg.values that describe allocas into *indirect* DBG_VALUEs. CodeGenPrepare - leaving dbg.values for an alloca were they are (see comment) Other - regenerated/updated instcombine.ll testcase and included source rdar://problem/16679879 http://reviews.llvm.org/D3374 llvm-svn: 207269
2014-04-26 04:49:25 +08:00
; ModuleID = 'array.c'
;
; From (clang -g -c -O1):
;
; void f(int* p) {
; p[0] = 42;
; }
;
; int main(int argc, char** argv) {
; int array[4] = { 0, 1, 2, 3 };
; f(array);
; return array[0];
; }
;
; RUN: llc -filetype=asm %s -o - | FileCheck %s
; Test that we only emit register-indirect locations for the array array.
; rdar://problem/14874886
;
; CHECK: ##DEBUG_VALUE: main:array <- [R{{.*}}+0]
; CHECK-NOT: ##DEBUG_VALUE: main:array <- R{{.*}}
target datalayout = "e-m:o-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-apple-macosx10.9.0"
@main.array = private unnamed_addr constant [4 x i32] [i32 0, i32 1, i32 2, i32 3], align 16
; Function Attrs: nounwind ssp uwtable
define void @f(i32* nocapture %p) #0 {
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
tail call void @llvm.dbg.value(metadata i32* %p, i64 0, metadata !11, metadata !{!"0x102"}), !dbg !28
This reapplies r207235 with an additional bugfixes caught by the msan buildbot - do not insert debug intrinsics before phi nodes. Debug info for optimized code: Support variables that are on the stack and described by DBG_VALUEs during their lifetime. Previously, when a variable was at a FrameIndex for any part of its lifetime, this would shadow all other DBG_VALUEs and only a single fbreg location would be emitted, which in fact is only valid for a small range and not the entire lexical scope of the variable. The included dbg-value-const-byref testcase demonstrates this. This patch fixes this by Local - emitting dbg.value intrinsics for allocas that are passed by reference - dropping all dbg.declares (they are now fully lowered to dbg.values) SelectionDAG - renamed constructors for SDDbgValue for better readability. - fix UserValue::match() to handle indirect values correctly - not inserting an MMI table entries for dbg.values that describe allocas. - lowering dbg.values that describe allocas into *indirect* DBG_VALUEs. CodeGenPrepare - leaving dbg.values for an alloca were they are (see comment) Other - regenerated/updated instcombine.ll testcase and included source rdar://problem/16679879 http://reviews.llvm.org/D3374 llvm-svn: 207269
2014-04-26 04:49:25 +08:00
store i32 42, i32* %p, align 4, !dbg !29, !tbaa !30
ret void, !dbg !34
}
; Function Attrs: nounwind ssp uwtable
define i32 @main(i32 %argc, i8** nocapture readnone %argv) #0 {
%array = alloca [4 x i32], align 16
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
tail call void @llvm.dbg.value(metadata i32 %argc, i64 0, metadata !19, metadata !{!"0x102"}), !dbg !35
tail call void @llvm.dbg.value(metadata i8** %argv, i64 0, metadata !20, metadata !{!"0x102"}), !dbg !35
tail call void @llvm.dbg.value(metadata [4 x i32]* %array, i64 0, metadata !21, metadata !{!"0x102"}), !dbg !36
This reapplies r207235 with an additional bugfixes caught by the msan buildbot - do not insert debug intrinsics before phi nodes. Debug info for optimized code: Support variables that are on the stack and described by DBG_VALUEs during their lifetime. Previously, when a variable was at a FrameIndex for any part of its lifetime, this would shadow all other DBG_VALUEs and only a single fbreg location would be emitted, which in fact is only valid for a small range and not the entire lexical scope of the variable. The included dbg-value-const-byref testcase demonstrates this. This patch fixes this by Local - emitting dbg.value intrinsics for allocas that are passed by reference - dropping all dbg.declares (they are now fully lowered to dbg.values) SelectionDAG - renamed constructors for SDDbgValue for better readability. - fix UserValue::match() to handle indirect values correctly - not inserting an MMI table entries for dbg.values that describe allocas. - lowering dbg.values that describe allocas into *indirect* DBG_VALUEs. CodeGenPrepare - leaving dbg.values for an alloca were they are (see comment) Other - regenerated/updated instcombine.ll testcase and included source rdar://problem/16679879 http://reviews.llvm.org/D3374 llvm-svn: 207269
2014-04-26 04:49:25 +08:00
%1 = bitcast [4 x i32]* %array to i8*, !dbg !36
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %1, i8* bitcast ([4 x i32]* @main.array to i8*), i64 16, i32 16, i1 false), !dbg !36
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
tail call void @llvm.dbg.value(metadata [4 x i32]* %array, i64 0, metadata !21, metadata !{!"0x102"}), !dbg !36
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%2 = getelementptr inbounds [4 x i32], [4 x i32]* %array, i64 0, i64 0, !dbg !37
This reapplies r207235 with an additional bugfixes caught by the msan buildbot - do not insert debug intrinsics before phi nodes. Debug info for optimized code: Support variables that are on the stack and described by DBG_VALUEs during their lifetime. Previously, when a variable was at a FrameIndex for any part of its lifetime, this would shadow all other DBG_VALUEs and only a single fbreg location would be emitted, which in fact is only valid for a small range and not the entire lexical scope of the variable. The included dbg-value-const-byref testcase demonstrates this. This patch fixes this by Local - emitting dbg.value intrinsics for allocas that are passed by reference - dropping all dbg.declares (they are now fully lowered to dbg.values) SelectionDAG - renamed constructors for SDDbgValue for better readability. - fix UserValue::match() to handle indirect values correctly - not inserting an MMI table entries for dbg.values that describe allocas. - lowering dbg.values that describe allocas into *indirect* DBG_VALUEs. CodeGenPrepare - leaving dbg.values for an alloca were they are (see comment) Other - regenerated/updated instcombine.ll testcase and included source rdar://problem/16679879 http://reviews.llvm.org/D3374 llvm-svn: 207269
2014-04-26 04:49:25 +08:00
call void @f(i32* %2), !dbg !37
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
tail call void @llvm.dbg.value(metadata [4 x i32]* %array, i64 0, metadata !21, metadata !{!"0x102"}), !dbg !36
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%3 = load i32, i32* %2, align 16, !dbg !38, !tbaa !30
This reapplies r207235 with an additional bugfixes caught by the msan buildbot - do not insert debug intrinsics before phi nodes. Debug info for optimized code: Support variables that are on the stack and described by DBG_VALUEs during their lifetime. Previously, when a variable was at a FrameIndex for any part of its lifetime, this would shadow all other DBG_VALUEs and only a single fbreg location would be emitted, which in fact is only valid for a small range and not the entire lexical scope of the variable. The included dbg-value-const-byref testcase demonstrates this. This patch fixes this by Local - emitting dbg.value intrinsics for allocas that are passed by reference - dropping all dbg.declares (they are now fully lowered to dbg.values) SelectionDAG - renamed constructors for SDDbgValue for better readability. - fix UserValue::match() to handle indirect values correctly - not inserting an MMI table entries for dbg.values that describe allocas. - lowering dbg.values that describe allocas into *indirect* DBG_VALUEs. CodeGenPrepare - leaving dbg.values for an alloca were they are (see comment) Other - regenerated/updated instcombine.ll testcase and included source rdar://problem/16679879 http://reviews.llvm.org/D3374 llvm-svn: 207269
2014-04-26 04:49:25 +08:00
ret i32 %3, !dbg !38
}
; Function Attrs: nounwind
declare void @llvm.memcpy.p0i8.p0i8.i64(i8* nocapture, i8* nocapture readonly, i64, i32, i1) #1
; Function Attrs: nounwind readnone
Move the complex address expression out of DIVariable and into an extra argument of the llvm.dbg.declare/llvm.dbg.value intrinsics. Previously, DIVariable was a variable-length field that has an optional reference to a Metadata array consisting of a variable number of complex address expressions. In the case of OpPiece expressions this is wasting a lot of storage in IR, because when an aggregate type is, e.g., SROA'd into all of its n individual members, the IR will contain n copies of the DIVariable, all alike, only differing in the complex address reference at the end. By making the complex address into an extra argument of the dbg.value/dbg.declare intrinsics, all of the pieces can reference the same variable and the complex address expressions can be uniqued across the CU, too. Down the road, this will allow us to move other flags, such as "indirection" out of the DIVariable, too. The new intrinsics look like this: declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr) declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr) This patch adds a new LLVM-local tag to DIExpressions, so we can detect and pretty-print DIExpression metadata nodes. What this patch doesn't do: This patch does not touch the "Indirect" field in DIVariable; but moving that into the expression would be a natural next step. http://reviews.llvm.org/D4919 rdar://problem/17994491 Thanks to dblaikie and dexonsmith for reviewing this patch! Note: I accidentally committed a bogus older version of this patch previously. llvm-svn: 218787
2014-10-02 02:55:02 +08:00
declare void @llvm.dbg.value(metadata, i64, metadata, metadata) #2
This reapplies r207235 with an additional bugfixes caught by the msan buildbot - do not insert debug intrinsics before phi nodes. Debug info for optimized code: Support variables that are on the stack and described by DBG_VALUEs during their lifetime. Previously, when a variable was at a FrameIndex for any part of its lifetime, this would shadow all other DBG_VALUEs and only a single fbreg location would be emitted, which in fact is only valid for a small range and not the entire lexical scope of the variable. The included dbg-value-const-byref testcase demonstrates this. This patch fixes this by Local - emitting dbg.value intrinsics for allocas that are passed by reference - dropping all dbg.declares (they are now fully lowered to dbg.values) SelectionDAG - renamed constructors for SDDbgValue for better readability. - fix UserValue::match() to handle indirect values correctly - not inserting an MMI table entries for dbg.values that describe allocas. - lowering dbg.values that describe allocas into *indirect* DBG_VALUEs. CodeGenPrepare - leaving dbg.values for an alloca were they are (see comment) Other - regenerated/updated instcombine.ll testcase and included source rdar://problem/16679879 http://reviews.llvm.org/D3374 llvm-svn: 207269
2014-04-26 04:49:25 +08:00
attributes #0 = { nounwind ssp uwtable }
attributes #1 = { nounwind }
attributes #2 = { nounwind readnone }
!llvm.dbg.cu = !{!0}
!llvm.module.flags = !{!25, !26}
!llvm.ident = !{!27}
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!0 = !{!"0x11\0012\00clang version 3.5.0 \001\00\000\00\001", !1, !2, !2, !3, !2, !2} ; [ DW_TAG_compile_unit ] [/array.c] [DW_LANG_C99]
!1 = !{!"array.c", !""}
!2 = !{}
!3 = !{!4, !12}
!4 = !{!"0x2e\00f\00f\00\001\000\001\000\006\00256\001\001", !1, !5, !6, null, void (i32*)* @f, null, null, !10} ; [ DW_TAG_subprogram ] [line 1] [def] [f]
!5 = !{!"0x29", !1} ; [ DW_TAG_file_type ] [/array.c]
!6 = !{!"0x15\00\000\000\000\000\000\000", i32 0, null, null, !7, null, null, null} ; [ DW_TAG_subroutine_type ] [line 0, size 0, align 0, offset 0] [from ]
!7 = !{null, !8}
!8 = !{!"0xf\00\000\0064\0064\000\000", null, null, !9} ; [ DW_TAG_pointer_type ] [line 0, size 64, align 64, offset 0] [from int]
!9 = !{!"0x24\00int\000\0032\0032\000\000\005", null, null} ; [ DW_TAG_base_type ] [int] [line 0, size 32, align 32, offset 0, enc DW_ATE_signed]
!10 = !{!11}
!11 = !{!"0x101\00p\0016777217\000", !4, !5, !8} ; [ DW_TAG_arg_variable ] [p] [line 1]
!12 = !{!"0x2e\00main\00main\00\005\000\001\000\006\00256\001\005", !1, !5, !13, null, i32 (i32, i8**)* @main, null, null, !18} ; [ DW_TAG_subprogram ] [line 5] [def] [main]
!13 = !{!"0x15\00\000\000\000\000\000\000", i32 0, null, null, !14, null, null, null} ; [ DW_TAG_subroutine_type ] [line 0, size 0, align 0, offset 0] [from ]
!14 = !{!9, !9, !15}
!15 = !{!"0xf\00\000\0064\0064\000\000", null, null, !16} ; [ DW_TAG_pointer_type ] [line 0, size 64, align 64, offset 0] [from ]
!16 = !{!"0xf\00\000\0064\0064\000\000", null, null, !17} ; [ DW_TAG_pointer_type ] [line 0, size 64, align 64, offset 0] [from char]
!17 = !{!"0x24\00char\000\008\008\000\000\006", null, null} ; [ DW_TAG_base_type ] [char] [line 0, size 8, align 8, offset 0, enc DW_ATE_signed_char]
!18 = !{!19, !20, !21}
!19 = !{!"0x101\00argc\0016777221\000", !12, !5, !9} ; [ DW_TAG_arg_variable ] [argc] [line 5]
!20 = !{!"0x101\00argv\0033554437\000", !12, !5, !15} ; [ DW_TAG_arg_variable ] [argv] [line 5]
!21 = !{!"0x100\00array\006\000", !12, !5, !22} ; [ DW_TAG_auto_variable ] [array] [line 6]
!22 = !{!"0x1\00\000\00128\0032\000\000", null, null, !9, !23, i32 0, null, null, null} ; [ DW_TAG_array_type ] [line 0, size 128, align 32, offset 0] [from int]
!23 = !{!24}
!24 = !{!"0x21\000\004"} ; [ DW_TAG_subrange_type ] [0, 3]
!25 = !{i32 2, !"Dwarf Version", i32 2}
!26 = !{i32 1, !"Debug Info Version", i32 2}
!27 = !{!"clang version 3.5.0 "}
IR: Move MDLocation into place This commit moves `MDLocation`, finishing off PR21433. There's an accompanying clang commit for frontend testcases. I'll attach the testcase upgrade script I used to PR21433 to help out-of-tree frontends/backends. This changes the schema for `DebugLoc` and `DILocation` from: !{i32 3, i32 7, !7, !8} to: !MDLocation(line: 3, column: 7, scope: !7, inlinedAt: !8) Note that empty fields (line/column: 0 and inlinedAt: null) don't get printed by the assembly writer. llvm-svn: 226048
2015-01-15 06:27:36 +08:00
!28 = !MDLocation(line: 1, scope: !4)
!29 = !MDLocation(line: 2, scope: !4)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!30 = !{!31, !31, i64 0}
!31 = !{!"int", !32, i64 0}
!32 = !{!"omnipotent char", !33, i64 0}
!33 = !{!"Simple C/C++ TBAA"}
IR: Move MDLocation into place This commit moves `MDLocation`, finishing off PR21433. There's an accompanying clang commit for frontend testcases. I'll attach the testcase upgrade script I used to PR21433 to help out-of-tree frontends/backends. This changes the schema for `DebugLoc` and `DILocation` from: !{i32 3, i32 7, !7, !8} to: !MDLocation(line: 3, column: 7, scope: !7, inlinedAt: !8) Note that empty fields (line/column: 0 and inlinedAt: null) don't get printed by the assembly writer. llvm-svn: 226048
2015-01-15 06:27:36 +08:00
!34 = !MDLocation(line: 3, scope: !4)
!35 = !MDLocation(line: 5, scope: !12)
!36 = !MDLocation(line: 6, scope: !12)
!37 = !MDLocation(line: 7, scope: !12)
!38 = !MDLocation(line: 8, scope: !12)