llvm-project/llvm/lib/MC/CMakeLists.txt

58 lines
1.1 KiB
CMake
Raw Normal View History

add_llvm_library(LLVMMC
ELFObjectWriter.cpp
2011-09-25 06:06:35 +08:00
MCAsmBackend.cpp
MCAsmInfo.cpp
MCAsmInfoCOFF.cpp
MCAsmInfoDarwin.cpp
MCAsmInfoELF.cpp
MCAsmStreamer.cpp
2009-08-21 19:28:56 +08:00
MCAssembler.cpp
2011-09-23 06:38:34 +08:00
MCAtom.cpp
2009-08-27 10:08:37 +08:00
MCCodeEmitter.cpp
MCCodeGenInfo.cpp
MCContext.cpp
2009-09-12 05:49:45 +08:00
MCDisassembler.cpp
2011-09-25 06:06:35 +08:00
MCDwarf.cpp
MCELF.cpp
MCELFObjectTargetWriter.cpp
MCELFStreamer.cpp
MC: Disassembled CFG reconstruction. This patch builds on some existing code to do CFG reconstruction from a disassembled binary: - MCModule represents the binary, and has a list of MCAtoms. - MCAtom represents either disassembled instructions (MCTextAtom), or contiguous data (MCDataAtom), and covers a specific range of addresses. - MCBasicBlock and MCFunction form the reconstructed CFG. An MCBB is backed by an MCTextAtom, and has the usual successors/predecessors. - MCObjectDisassembler creates a module from an ObjectFile using a disassembler. It first builds an atom for each section. It can also construct the CFG, and this splits the text atoms into basic blocks. MCModule and MCAtom were only sketched out; MCFunction and MCBB were implemented under the experimental "-cfg" llvm-objdump -macho option. This cleans them up for further use; llvm-objdump -d -cfg now generates graphviz files for each function found in the binary. In the future, MCObjectDisassembler may be the right place to do "intelligent" disassembly: for example, handling constant islands is just a matter of splitting the atom, using information that may be available in the ObjectFile. Also, better initial atom formation than just using sections is possible using symbols (and things like Mach-O's function_starts load command). This brings two minor regressions in llvm-objdump -macho -cfg: - The printing of a relocation's referenced symbol. - An annotation on loop BBs, i.e., which are their own successor. Relocation printing is replaced by the MCSymbolizer; the basic CFG annotation will be superseded by more related functionality. llvm-svn: 182628
2013-05-24 09:07:04 +08:00
MCFunction.cpp
MCExpr.cpp
Add MCSymbolizer for symbolic/annotated disassembly. This is a basic first step towards symbolization of disassembled instructions. This used to be done using externally provided (C API) callbacks. This patch introduces: - the MCSymbolizer class, that mimics the same functions that were used in the X86 and ARM disassemblers to symbolize immediate operands and to annotate loads based off PC (for things like c string literals). - the MCExternalSymbolizer class, which implements the old C API. - the MCRelocationInfo class, which provides a way for targets to translate relocations (either object::RelocationRef, or disassembler C API VariantKinds) to MCExprs. - the MCObjectSymbolizer class, which does symbolization using what it finds in an object::ObjectFile. This makes simple symbolization (with no fancy relocation stuff) work for all object formats! - x86-64 Mach-O and ELF MCRelocationInfos. - A basic ARM Mach-O MCRelocationInfo, that provides just enough to support the C API VariantKinds. Most of what works in otool (the only user of the old symbolization API that I know of) for x86-64 symbolic disassembly (-tvV) works, namely: - symbol references: call _foo; jmp 15 <_foo+50> - relocations: call _foo-_bar; call _foo-4 - __cf?string: leaq 193(%rip), %rax ## literal pool for "hello" Stub support is the main missing part (because libObject doesn't know, among other things, about mach-o indirect symbols). As for the MCSymbolizer API, instead of relying on the disassemblers to call the tryAdding* methods, maybe this could be done automagically using InstrInfo? For instance, even though PC-relative LEAs are used to get the address of string literals in a typical Mach-O file, a MOV would be used in an ELF file. And right now, the explicit symbolization only recognizes PC-relative LEAs. InstrInfo should have already have most of what is needed to know what to symbolize, so this can definitely be improved. I'd also like to remove object::RelocationRef::getValueString (it seems only used by relocation printing in objdump), as simply printing the created MCExpr is definitely enough (and cleaner than string concats). llvm-svn: 182625
2013-05-24 08:39:57 +08:00
MCExternalSymbolizer.cpp
MCInst.cpp
2009-09-14 13:22:47 +08:00
MCInstPrinter.cpp
MCInstrAnalysis.cpp
MCLabel.cpp
MCLinkerOptimizationHint.cpp
2009-08-21 19:28:56 +08:00
MCMachOStreamer.cpp
MCMachObjectTargetWriter.cpp
2011-09-23 06:38:34 +08:00
MCModule.cpp
MC CFG: Add YAML MCModule representation to enable MC CFG testing. Like yaml ObjectFiles, this will be very useful for testing the MC CFG implementation (mostly MCObjectDisassembler), by matching the output with YAML, and for potential users of the MC CFG, by using it as an input. There isn't much to the actual format, it is just a serialization of the MCModule class. Of note: - Basic block references (pred/succ, ..) are represented by the BB's start address. - Just as in the MC CFG, instructions are MCInsts with a size. - Operands have a prefix representing the type (only register and immediate supported here). - Instruction opcodes are represented by their names; enum values aren't stable, enum names mostly are: usually, a change to a name would need lots of changes in the backend anyway. Same with registers. All in all, an example is better than 1000 words, here goes: A simple binary: Disassembly of section __TEXT,__text: _main: 100000f9c: 48 8b 46 08 movq 8(%rsi), %rax 100000fa0: 0f be 00 movsbl (%rax), %eax 100000fa3: 3b 04 25 48 00 00 00 cmpl 72, %eax 100000faa: 0f 8c 07 00 00 00 jl 7 <.Lend> 100000fb0: 2b 04 25 48 00 00 00 subl 72, %eax .Lend: 100000fb7: c3 ret And the (pretty verbose) generated YAML: --- Atoms: - StartAddress: 0x0000000100000F9C Size: 20 Type: Text Content: - Inst: MOV64rm Size: 4 Ops: [ RRAX, RRSI, I1, R, I8, R ] - Inst: MOVSX32rm8 Size: 3 Ops: [ REAX, RRAX, I1, R, I0, R ] - Inst: CMP32rm Size: 7 Ops: [ REAX, R, I1, R, I72, R ] - Inst: JL_4 Size: 6 Ops: [ I7 ] - StartAddress: 0x0000000100000FB0 Size: 7 Type: Text Content: - Inst: SUB32rm Size: 7 Ops: [ REAX, REAX, R, I1, R, I72, R ] - StartAddress: 0x0000000100000FB7 Size: 1 Type: Text Content: - Inst: RET Size: 1 Ops: [ ] Functions: - Name: __text BasicBlocks: - Address: 0x0000000100000F9C Preds: [ ] Succs: [ 0x0000000100000FB7, 0x0000000100000FB0 ] <snip> ... llvm-svn: 188890
2013-08-21 15:29:02 +08:00
MCModuleYAML.cpp
2009-08-21 19:28:56 +08:00
MCNullStreamer.cpp
2011-07-20 14:35:24 +08:00
MCObjectFileInfo.cpp
MC: Disassembled CFG reconstruction. This patch builds on some existing code to do CFG reconstruction from a disassembled binary: - MCModule represents the binary, and has a list of MCAtoms. - MCAtom represents either disassembled instructions (MCTextAtom), or contiguous data (MCDataAtom), and covers a specific range of addresses. - MCBasicBlock and MCFunction form the reconstructed CFG. An MCBB is backed by an MCTextAtom, and has the usual successors/predecessors. - MCObjectDisassembler creates a module from an ObjectFile using a disassembler. It first builds an atom for each section. It can also construct the CFG, and this splits the text atoms into basic blocks. MCModule and MCAtom were only sketched out; MCFunction and MCBB were implemented under the experimental "-cfg" llvm-objdump -macho option. This cleans them up for further use; llvm-objdump -d -cfg now generates graphviz files for each function found in the binary. In the future, MCObjectDisassembler may be the right place to do "intelligent" disassembly: for example, handling constant islands is just a matter of splitting the atom, using information that may be available in the ObjectFile. Also, better initial atom formation than just using sections is possible using symbols (and things like Mach-O's function_starts load command). This brings two minor regressions in llvm-objdump -macho -cfg: - The printing of a relocation's referenced symbol. - An annotation on loop BBs, i.e., which are their own successor. Relocation printing is replaced by the MCSymbolizer; the basic CFG annotation will be superseded by more related functionality. llvm-svn: 182628
2013-05-24 09:07:04 +08:00
MCObjectDisassembler.cpp
MCObjectStreamer.cpp
Add MCSymbolizer for symbolic/annotated disassembly. This is a basic first step towards symbolization of disassembled instructions. This used to be done using externally provided (C API) callbacks. This patch introduces: - the MCSymbolizer class, that mimics the same functions that were used in the X86 and ARM disassemblers to symbolize immediate operands and to annotate loads based off PC (for things like c string literals). - the MCExternalSymbolizer class, which implements the old C API. - the MCRelocationInfo class, which provides a way for targets to translate relocations (either object::RelocationRef, or disassembler C API VariantKinds) to MCExprs. - the MCObjectSymbolizer class, which does symbolization using what it finds in an object::ObjectFile. This makes simple symbolization (with no fancy relocation stuff) work for all object formats! - x86-64 Mach-O and ELF MCRelocationInfos. - A basic ARM Mach-O MCRelocationInfo, that provides just enough to support the C API VariantKinds. Most of what works in otool (the only user of the old symbolization API that I know of) for x86-64 symbolic disassembly (-tvV) works, namely: - symbol references: call _foo; jmp 15 <_foo+50> - relocations: call _foo-_bar; call _foo-4 - __cf?string: leaq 193(%rip), %rax ## literal pool for "hello" Stub support is the main missing part (because libObject doesn't know, among other things, about mach-o indirect symbols). As for the MCSymbolizer API, instead of relying on the disassemblers to call the tryAdding* methods, maybe this could be done automagically using InstrInfo? For instance, even though PC-relative LEAs are used to get the address of string literals in a typical Mach-O file, a MOV would be used in an ELF file. And right now, the explicit symbolization only recognizes PC-relative LEAs. InstrInfo should have already have most of what is needed to know what to symbolize, so this can definitely be improved. I'd also like to remove object::RelocationRef::getValueString (it seems only used by relocation printing in objdump), as simply printing the created MCExpr is definitely enough (and cleaner than string concats). llvm-svn: 182625
2013-05-24 08:39:57 +08:00
MCObjectSymbolizer.cpp
MCObjectWriter.cpp
MCRegisterInfo.cpp
Add MCSymbolizer for symbolic/annotated disassembly. This is a basic first step towards symbolization of disassembled instructions. This used to be done using externally provided (C API) callbacks. This patch introduces: - the MCSymbolizer class, that mimics the same functions that were used in the X86 and ARM disassemblers to symbolize immediate operands and to annotate loads based off PC (for things like c string literals). - the MCExternalSymbolizer class, which implements the old C API. - the MCRelocationInfo class, which provides a way for targets to translate relocations (either object::RelocationRef, or disassembler C API VariantKinds) to MCExprs. - the MCObjectSymbolizer class, which does symbolization using what it finds in an object::ObjectFile. This makes simple symbolization (with no fancy relocation stuff) work for all object formats! - x86-64 Mach-O and ELF MCRelocationInfos. - A basic ARM Mach-O MCRelocationInfo, that provides just enough to support the C API VariantKinds. Most of what works in otool (the only user of the old symbolization API that I know of) for x86-64 symbolic disassembly (-tvV) works, namely: - symbol references: call _foo; jmp 15 <_foo+50> - relocations: call _foo-_bar; call _foo-4 - __cf?string: leaq 193(%rip), %rax ## literal pool for "hello" Stub support is the main missing part (because libObject doesn't know, among other things, about mach-o indirect symbols). As for the MCSymbolizer API, instead of relying on the disassemblers to call the tryAdding* methods, maybe this could be done automagically using InstrInfo? For instance, even though PC-relative LEAs are used to get the address of string literals in a typical Mach-O file, a MOV would be used in an ELF file. And right now, the explicit symbolization only recognizes PC-relative LEAs. InstrInfo should have already have most of what is needed to know what to symbolize, so this can definitely be improved. I'd also like to remove object::RelocationRef::getValueString (it seems only used by relocation printing in objdump), as simply printing the created MCExpr is definitely enough (and cleaner than string concats). llvm-svn: 182625
2013-05-24 08:39:57 +08:00
MCRelocationInfo.cpp
MCSection.cpp
2010-05-08 01:29:48 +08:00
MCSectionCOFF.cpp
MCSectionELF.cpp
MCSectionMachO.cpp
MCStreamer.cpp
MCSubtargetInfo.cpp
MCSymbol.cpp
Add MCSymbolizer for symbolic/annotated disassembly. This is a basic first step towards symbolization of disassembled instructions. This used to be done using externally provided (C API) callbacks. This patch introduces: - the MCSymbolizer class, that mimics the same functions that were used in the X86 and ARM disassemblers to symbolize immediate operands and to annotate loads based off PC (for things like c string literals). - the MCExternalSymbolizer class, which implements the old C API. - the MCRelocationInfo class, which provides a way for targets to translate relocations (either object::RelocationRef, or disassembler C API VariantKinds) to MCExprs. - the MCObjectSymbolizer class, which does symbolization using what it finds in an object::ObjectFile. This makes simple symbolization (with no fancy relocation stuff) work for all object formats! - x86-64 Mach-O and ELF MCRelocationInfos. - A basic ARM Mach-O MCRelocationInfo, that provides just enough to support the C API VariantKinds. Most of what works in otool (the only user of the old symbolization API that I know of) for x86-64 symbolic disassembly (-tvV) works, namely: - symbol references: call _foo; jmp 15 <_foo+50> - relocations: call _foo-_bar; call _foo-4 - __cf?string: leaq 193(%rip), %rax ## literal pool for "hello" Stub support is the main missing part (because libObject doesn't know, among other things, about mach-o indirect symbols). As for the MCSymbolizer API, instead of relying on the disassemblers to call the tryAdding* methods, maybe this could be done automagically using InstrInfo? For instance, even though PC-relative LEAs are used to get the address of string literals in a typical Mach-O file, a MOV would be used in an ELF file. And right now, the explicit symbolization only recognizes PC-relative LEAs. InstrInfo should have already have most of what is needed to know what to symbolize, so this can definitely be improved. I'd also like to remove object::RelocationRef::getValueString (it seems only used by relocation printing in objdump), as simply printing the created MCExpr is definitely enough (and cleaner than string concats). llvm-svn: 182625
2013-05-24 08:39:57 +08:00
MCSymbolizer.cpp
MCTargetOptions.cpp
MCValue.cpp
MCWin64EH.cpp
MachObjectWriter.cpp
2011-06-29 11:26:17 +08:00
SubtargetFeature.cpp
2011-09-25 06:06:35 +08:00
WinCOFFObjectWriter.cpp
WinCOFFStreamer.cpp
)
add_subdirectory(MCParser)
add_subdirectory(MCDisassembler)