maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/Mips/instverify/ext-size.mir

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

50 lines
1.2 KiB
Plaintext
Raw Normal View History

Rename ExpandISelPseudo->FinalizeISel, delay register reservation This allows targets to make more decisions about reserved registers after isel. For example, now it should be certain there are calls or stack objects in the frame or not, which could have been introduced by legalization. Patch by Matthias Braun llvm-svn: 363757
2019-06-19 08:25:39 +08:00
# RUN: not llc -march=mips64 -mcpu=mips64r2 -start-after=finalize-isel -stop-after=finalize-isel \
[mips] Pick the right variant of DINS upfront and enable target instruction verification This patch complements D16810 "[mips] Make isel select the correct DEXT variant up front.". Now ISel picks the right variant of DINS, so now there is no need to replace DINS with the appropriate variant during MipsMCCodeEmitter::encodeInstruction(). This patch also enables target specific instruction verification for ins, dins, dinsm, dinsu, ext, dext, dextm, dextu. These instructions have constraints that are checked when generating MipsISD::Ins and MipsISD::Ext nodes, but these constraints are not checked during instruction selection. Adding machine verification should catch outstanding cases. Finally, correct a bug that instruction verification uncovered, where the position operand of a DINSU generated during lowering was being silently and accidently corrected to the correct value. Reviewers: slthakur Differential Revision: https://reviews.llvm.org/D34809 llvm-svn: 313254
2017-09-14 18:58:00 +08:00
# RUN: -verify-machineinstrs %s -o - 2>&1 | FileCheck %s
# CHECK: Size operand is out of range!
Reland "[mips] Fix the target specific instruction verifier" Fix an off by one error in the bounds checking for 'dinsu' and update the ranges in the test comments so that they are accurate. This version has the correct commit message. Reviewers: atanasyan Differential Revision: https://reviews.llvm.org/D41183 llvm-svn: 320991
2017-12-18 23:56:40 +08:00
# Check that the machine verifier checks the size operand is in the range 1..32
[mips] Pick the right variant of DINS upfront and enable target instruction verification This patch complements D16810 "[mips] Make isel select the correct DEXT variant up front.". Now ISel picks the right variant of DINS, so now there is no need to replace DINS with the appropriate variant during MipsMCCodeEmitter::encodeInstruction(). This patch also enables target specific instruction verification for ins, dins, dinsm, dinsu, ext, dext, dextm, dextu. These instructions have constraints that are checked when generating MipsISD::Ins and MipsISD::Ext nodes, but these constraints are not checked during instruction selection. Adding machine verification should catch outstanding cases. Finally, correct a bug that instruction verification uncovered, where the position operand of a DINSU generated during lowering was being silently and accidently corrected to the correct value. Reviewers: slthakur Differential Revision: https://reviews.llvm.org/D34809 llvm-svn: 313254
2017-09-14 18:58:00 +08:00
---
name: f
[Alignment] Use llvm::Align in MachineFunction and TargetLowering - fixes mir parsing Summary: This catches malformed mir files which specify alignment as log2 instead of pow2. See https://reviews.llvm.org/D65945 for reference, This is patch is part of a series to introduce an Alignment type. See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html See this patch for the introduction of the type: https://reviews.llvm.org/D64790 Reviewers: courbet Subscribers: MatzeB, qcolombet, dschuff, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, s.egerton, pzheng, llvm-commits Tags: #llvm Differential Revision: https://reviews.llvm.org/D67433 llvm-svn: 371608
2019-09-11 19:16:48 +08:00
alignment: 4
[mips] Pick the right variant of DINS upfront and enable target instruction verification This patch complements D16810 "[mips] Make isel select the correct DEXT variant up front.". Now ISel picks the right variant of DINS, so now there is no need to replace DINS with the appropriate variant during MipsMCCodeEmitter::encodeInstruction(). This patch also enables target specific instruction verification for ins, dins, dinsm, dinsu, ext, dext, dextm, dextu. These instructions have constraints that are checked when generating MipsISD::Ins and MipsISD::Ext nodes, but these constraints are not checked during instruction selection. Adding machine verification should catch outstanding cases. Finally, correct a bug that instruction verification uncovered, where the position operand of a DINSU generated during lowering was being silently and accidently corrected to the correct value. Reviewers: slthakur Differential Revision: https://reviews.llvm.org/D34809 llvm-svn: 313254
2017-09-14 18:58:00 +08:00
exposesReturnsTwice: false
legalized: false
regBankSelected: false
selected: false
tracksRegLiveness: true
registers:
- { id: 0, class: gpr32, preferred-register: '' }
- { id: 1, class: gpr32, preferred-register: '' }
liveins:
Followup on Proposal to move MIR physical register namespace to '$' sigil. Discussed here: http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html In preparation for adding support for named vregs we are changing the sigil for physical registers in MIR to '$' from '%'. This will prevent name clashes of named physical register with named vregs. llvm-svn: 323922
2018-02-01 06:04:26 +08:00
- { reg: '$a0', virtual-reg: '%0' }
[mips] Pick the right variant of DINS upfront and enable target instruction verification This patch complements D16810 "[mips] Make isel select the correct DEXT variant up front.". Now ISel picks the right variant of DINS, so now there is no need to replace DINS with the appropriate variant during MipsMCCodeEmitter::encodeInstruction(). This patch also enables target specific instruction verification for ins, dins, dinsm, dinsu, ext, dext, dextm, dextu. These instructions have constraints that are checked when generating MipsISD::Ins and MipsISD::Ext nodes, but these constraints are not checked during instruction selection. Adding machine verification should catch outstanding cases. Finally, correct a bug that instruction verification uncovered, where the position operand of a DINSU generated during lowering was being silently and accidently corrected to the correct value. Reviewers: slthakur Differential Revision: https://reviews.llvm.org/D34809 llvm-svn: 313254
2017-09-14 18:58:00 +08:00
frameInfo:
isFrameAddressTaken: false
isReturnAddressTaken: false
hasStackMap: false
hasPatchPoint: false
stackSize: 0
offsetAdjustment: 0
maxAlignment: 1
adjustsStack: false
hasCalls: false
stackProtector: ''
maxCallFrameSize: 4294967295
hasOpaqueSPAdjustment: false
hasVAStart: false
hasMustTailInVarArgFunc: false
savePoint: ''
restorePoint: ''
fixedStack:
stack:
constants:
body: |
bb.0.entry:
Followup on Proposal to move MIR physical register namespace to '$' sigil. Discussed here: http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html In preparation for adding support for named vregs we are changing the sigil for physical registers in MIR to '$' from '%'. This will prevent name clashes of named physical register with named vregs. llvm-svn: 323922
2018-02-01 06:04:26 +08:00
liveins: $a0
[mips] Pick the right variant of DINS upfront and enable target instruction verification This patch complements D16810 "[mips] Make isel select the correct DEXT variant up front.". Now ISel picks the right variant of DINS, so now there is no need to replace DINS with the appropriate variant during MipsMCCodeEmitter::encodeInstruction(). This patch also enables target specific instruction verification for ins, dins, dinsm, dinsu, ext, dext, dextm, dextu. These instructions have constraints that are checked when generating MipsISD::Ins and MipsISD::Ext nodes, but these constraints are not checked during instruction selection. Adding machine verification should catch outstanding cases. Finally, correct a bug that instruction verification uncovered, where the position operand of a DINSU generated during lowering was being silently and accidently corrected to the correct value. Reviewers: slthakur Differential Revision: https://reviews.llvm.org/D34809 llvm-svn: 313254
2017-09-14 18:58:00 +08:00
Followup on Proposal to move MIR physical register namespace to '$' sigil. Discussed here: http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html In preparation for adding support for named vregs we are changing the sigil for physical registers in MIR to '$' from '%'. This will prevent name clashes of named physical register with named vregs. llvm-svn: 323922
2018-02-01 06:04:26 +08:00
%0 = COPY $a0
[mips] Pick the right variant of DINS upfront and enable target instruction verification This patch complements D16810 "[mips] Make isel select the correct DEXT variant up front.". Now ISel picks the right variant of DINS, so now there is no need to replace DINS with the appropriate variant during MipsMCCodeEmitter::encodeInstruction(). This patch also enables target specific instruction verification for ins, dins, dinsm, dinsu, ext, dext, dextm, dextu. These instructions have constraints that are checked when generating MipsISD::Ins and MipsISD::Ext nodes, but these constraints are not checked during instruction selection. Adding machine verification should catch outstanding cases. Finally, correct a bug that instruction verification uncovered, where the position operand of a DINSU generated during lowering was being silently and accidently corrected to the correct value. Reviewers: slthakur Differential Revision: https://reviews.llvm.org/D34809 llvm-svn: 313254
2017-09-14 18:58:00 +08:00
%1 = EXT %0, 0, 33
Followup on Proposal to move MIR physical register namespace to '$' sigil. Discussed here: http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html In preparation for adding support for named vregs we are changing the sigil for physical registers in MIR to '$' from '%'. This will prevent name clashes of named physical register with named vregs. llvm-svn: 323922
2018-02-01 06:04:26 +08:00
$v0 = COPY %1
RetRA implicit $v0
[mips] Pick the right variant of DINS upfront and enable target instruction verification This patch complements D16810 "[mips] Make isel select the correct DEXT variant up front.". Now ISel picks the right variant of DINS, so now there is no need to replace DINS with the appropriate variant during MipsMCCodeEmitter::encodeInstruction(). This patch also enables target specific instruction verification for ins, dins, dinsm, dinsu, ext, dext, dextm, dextu. These instructions have constraints that are checked when generating MipsISD::Ins and MipsISD::Ext nodes, but these constraints are not checked during instruction selection. Adding machine verification should catch outstanding cases. Finally, correct a bug that instruction verification uncovered, where the position operand of a DINSU generated during lowering was being silently and accidently corrected to the correct value. Reviewers: slthakur Differential Revision: https://reviews.llvm.org/D34809 llvm-svn: 313254
2017-09-14 18:58:00 +08:00
...