maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/SystemZ/cmpxchg-01.ll

56 lines
2.0 KiB
LLVM
Raw Normal View History

[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; Test 8-bit compare and swap.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s -check-prefix=CHECK-MAIN
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s -check-prefix=CHECK-SHIFT
; Check compare and swap with a variable.
; - CHECK is for the main loop.
; - CHECK-SHIFT makes sure that the negated shift count used by the second
; RLL is set up correctly. The negation is independent of the NILL and L
; tested in CHECK. CHECK-SHIFT also checks that %r3 is not modified before
; being used in the RISBG (in contrast to things like atomic addition,
; which shift %r3 left so that %b is at the high end of the word).
define i8 @f1(i8 %dummy, i8 *%src, i8 %cmp, i8 %swap) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-MAIN-LABEL: f1:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK-MAIN: sllg [[SHIFT:%r[1-9]+]], %r3, 3
; CHECK-MAIN: nill %r3, 65532
; CHECK-MAIN: l [[OLD:%r[0-9]+]], 0(%r3)
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-MAIN: [[LOOP:\.[^ ]*]]:
; CHECK-MAIN: rll %r2, [[OLD]], 8([[SHIFT]])
; CHECK-MAIN: risbg %r4, %r2, 32, 55, 0
[SystemZ] Register compare-and-branch support This patch adds support for the CRJ and CGRJ instructions. Support for the immediate forms will be a separate patch. The architecture has a large number of comparison instructions. I think it's generally better to concentrate on using the "best" comparison instruction first and foremost, then only use something like CRJ if CR really was the natual choice of comparison instruction. The patch therefore opportunistically converts separate CR and BRC instructions into a single CRJ while emitting instructions in ISelLowering. llvm-svn: 182764
2013-05-28 18:41:11 +08:00
; CHECK-MAIN: crjlh %r2, %r4, [[EXIT:\.[^ ]*]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-MAIN: risbg %r5, %r2, 32, 55, 0
; CHECK-MAIN: rll [[NEW:%r[0-9]+]], %r5, -8({{%r[1-9]+}})
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK-MAIN: cs [[OLD]], [[NEW]], 0(%r3)
[SystemZ] Tighten branch tests After r182274, the branches in these tests must always be short. llvm-svn: 182358
2013-05-21 16:53:17 +08:00
; CHECK-MAIN: jlh [[LOOP]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-MAIN: [[EXIT]]:
; CHECK-MAIN-NOT: %r2
; CHECK-MAIN: br %r14
;
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT-LABEL: f1:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT: sllg [[SHIFT:%r[1-9]+]], %r3, 3
; CHECK-SHIFT: lcr [[NEGSHIFT:%r[1-9]+]], [[SHIFT]]
; CHECK-SHIFT: rll
; CHECK-SHIFT: rll {{%r[0-9]+}}, %r5, -8([[NEGSHIFT]])
%res = cmpxchg i8 *%src, i8 %cmp, i8 %swap seq_cst
ret i8 %res
}
; Check compare and swap with constants. We should force the constants into
; registers and use the sequence above.
define i8 @f2(i8 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f2:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: lhi [[CMP:%r[0-9]+]], 42
; CHECK: risbg [[CMP]], {{%r[0-9]+}}, 32, 55, 0
; CHECK: risbg
; CHECK: br %r14
;
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT-LABEL: f2:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT: lhi [[SWAP:%r[0-9]+]], 88
; CHECK-SHIFT: risbg
; CHECK-SHIFT: risbg [[SWAP]], {{%r[0-9]+}}, 32, 55, 0
; CHECK-SHIFT: br %r14
%res = cmpxchg i8 *%src, i8 42, i8 88 seq_cst
ret i8 %res
}