2011-05-24 05:40:23 +08:00
//===-- ClangUserExpression.cpp ---------------------------------*- C++ -*-===//
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
// C Includes
# include <stdio.h>
# if HAVE_SYS_TYPES_H
# include <sys / types.h>
# endif
// C++ Includes
# include <cstdlib>
# include <string>
# include <map>
# include "lldb/Core/ConstString.h"
# include "lldb/Core/Log.h"
2011-01-19 03:36:39 +08:00
# include "lldb/Core/StreamFile.h"
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
# include "lldb/Core/StreamString.h"
2010-10-05 11:13:51 +08:00
# include "lldb/Core/ValueObjectConstResult.h"
2010-12-16 11:17:46 +08:00
# include "lldb/Expression/ASTResultSynthesizer.h"
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
# include "lldb/Expression/ClangExpressionDeclMap.h"
# include "lldb/Expression/ClangExpressionParser.h"
# include "lldb/Expression/ClangFunction.h"
# include "lldb/Expression/ClangUserExpression.h"
2011-09-27 02:45:31 +08:00
# include "lldb/Expression/ExpressionSourceCode.h"
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
# include "lldb/Host/Host.h"
<rdar://problem/11757916>
Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()
Cleaned up header includes a bit as well.
llvm-svn: 162860
2012-08-30 05:13:06 +08:00
# include "lldb/Symbol/Block.h"
2012-10-31 07:35:54 +08:00
# include "lldb/Symbol/ClangASTContext.h"
# include "lldb/Symbol/Function.h"
# include "lldb/Symbol/Type.h"
# include "lldb/Symbol/ClangExternalASTSourceCommon.h"
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
# include "lldb/Symbol/VariableList.h"
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
# include "lldb/Target/ExecutionContext.h"
2010-11-04 09:54:29 +08:00
# include "lldb/Target/Process.h"
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
# include "lldb/Target/StackFrame.h"
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
# include "lldb/Target/Target.h"
2010-11-30 10:22:11 +08:00
# include "lldb/Target/ThreadPlan.h"
# include "lldb/Target/ThreadPlanCallUserExpression.h"
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
2011-08-06 07:43:37 +08:00
# include "clang/AST/DeclCXX.h"
# include "clang/AST/DeclObjC.h"
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
using namespace lldb_private ;
2010-10-29 08:29:03 +08:00
ClangUserExpression : : ClangUserExpression ( const char * expr ,
2011-11-08 07:35:40 +08:00
const char * expr_prefix ,
2011-12-22 06:22:58 +08:00
lldb : : LanguageType language ,
ResultType desired_type ) :
2011-01-20 07:00:49 +08:00
ClangExpression ( ) ,
m_expr_text ( expr ) ,
m_expr_prefix ( expr_prefix ? expr_prefix : " " ) ,
2011-11-08 07:35:40 +08:00
m_language ( language ) ,
2011-01-20 07:00:49 +08:00
m_transformed_text ( ) ,
2011-12-22 06:22:58 +08:00
m_desired_type ( desired_type ) ,
2012-12-06 09:35:38 +08:00
m_enforce_valid_object ( true ) ,
2011-01-20 07:00:49 +08:00
m_cplusplus ( false ) ,
m_objectivec ( false ) ,
2012-04-03 16:46:13 +08:00
m_static_method ( false ) ,
2011-01-20 07:00:49 +08:00
m_needs_object_ptr ( false ) ,
2011-05-07 09:06:41 +08:00
m_const_object ( false ) ,
2011-11-01 06:50:49 +08:00
m_target ( NULL ) ,
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
m_evaluated_statically ( false ) ,
2012-04-03 16:46:13 +08:00
m_const_result ( )
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
{
2011-11-08 07:35:40 +08:00
switch ( m_language )
{
case lldb : : eLanguageTypeC_plus_plus :
m_allow_cxx = true ;
break ;
case lldb : : eLanguageTypeObjC :
m_allow_objc = true ;
break ;
case lldb : : eLanguageTypeObjC_plus_plus :
default :
m_allow_cxx = true ;
m_allow_objc = true ;
break ;
}
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
}
2010-08-28 07:31:21 +08:00
ClangUserExpression : : ~ ClangUserExpression ( )
{
}
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
clang : : ASTConsumer *
ClangUserExpression : : ASTTransformer ( clang : : ASTConsumer * passthrough )
2011-08-25 06:18:12 +08:00
{
2011-08-24 05:20:51 +08:00
ClangASTContext * clang_ast_context = m_target - > GetScratchClangASTContext ( ) ;
if ( ! clang_ast_context )
return NULL ;
2011-10-08 08:21:35 +08:00
if ( ! m_result_synthesizer . get ( ) )
m_result_synthesizer . reset ( new ASTResultSynthesizer ( passthrough ,
2011-12-06 11:41:14 +08:00
* m_target ) ) ;
2011-10-08 08:21:35 +08:00
return m_result_synthesizer . get ( ) ;
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
}
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
void
2011-11-04 10:09:33 +08:00
ClangUserExpression : : ScanContext ( ExecutionContext & exe_ctx , Error & err )
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
{
2012-12-01 08:08:33 +08:00
lldb : : LogSP log ( lldb_private : : GetLogIfAllCategoriesSet ( LIBLLDB_LOG_EXPRESSIONS ) ) ;
if ( log )
log - > Printf ( " ClangUserExpression::ScanContext() " ) ;
2011-09-22 12:58:26 +08:00
m_target = exe_ctx . GetTargetPtr ( ) ;
2011-09-13 07:21:58 +08:00
2011-11-08 07:35:40 +08:00
if ( ! ( m_allow_cxx | | m_allow_objc ) )
2012-12-01 08:08:33 +08:00
{
if ( log )
log - > Printf ( " [CUE::SC] Settings inhibit C++ and Objective-C " ) ;
2011-11-08 07:35:40 +08:00
return ;
2012-12-01 08:08:33 +08:00
}
2011-11-08 07:35:40 +08:00
2011-09-22 12:58:26 +08:00
StackFrame * frame = exe_ctx . GetFramePtr ( ) ;
if ( frame = = NULL )
2012-12-01 08:08:33 +08:00
{
if ( log )
log - > Printf ( " [CUE::SC] Null stack frame " ) ;
2011-08-06 07:43:37 +08:00
return ;
2012-12-01 08:08:33 +08:00
}
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
2012-07-14 05:20:29 +08:00
SymbolContext sym_ctx = frame - > GetSymbolContext ( lldb : : eSymbolContextFunction | lldb : : eSymbolContextBlock ) ;
2011-08-06 07:43:37 +08:00
if ( ! sym_ctx . function )
2012-12-01 08:08:33 +08:00
{
if ( log )
log - > Printf ( " [CUE::SC] Null function " ) ;
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
return ;
2012-12-01 08:08:33 +08:00
}
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
2012-07-14 08:53:55 +08:00
// Find the block that defines the function represented by "sym_ctx"
Block * function_block = sym_ctx . GetFunctionBlock ( ) ;
2010-12-02 05:35:54 +08:00
2012-07-14 08:53:55 +08:00
if ( ! function_block )
2012-12-01 08:08:33 +08:00
{
if ( log )
log - > Printf ( " [CUE::SC] Null function block " ) ;
2012-07-14 08:53:55 +08:00
return ;
2012-12-01 08:08:33 +08:00
}
2012-07-14 08:53:55 +08:00
clang : : DeclContext * decl_context = function_block - > GetClangDeclContext ( ) ;
2011-08-06 07:43:37 +08:00
if ( ! decl_context )
2012-12-01 08:08:33 +08:00
{
if ( log )
log - > Printf ( " [CUE::SC] Null decl context " ) ;
2011-08-06 07:43:37 +08:00
return ;
2012-12-01 08:08:33 +08:00
}
2011-08-06 07:43:37 +08:00
if ( clang : : CXXMethodDecl * method_decl = llvm : : dyn_cast < clang : : CXXMethodDecl > ( decl_context ) )
{
2011-11-08 07:35:40 +08:00
if ( m_allow_cxx & & method_decl - > isInstance ( ) )
2010-12-02 05:35:54 +08:00
{
2011-12-13 09:42:04 +08:00
if ( m_enforce_valid_object )
2011-11-04 10:09:33 +08:00
{
2012-07-14 08:53:55 +08:00
lldb : : VariableListSP variable_list_sp ( function_block - > GetBlockVariableList ( true ) ) ;
2011-12-13 09:42:04 +08:00
const char * thisErrorString = " Stopped in a C++ method, but 'this' isn't available; pretending we are in a generic context " ;
2012-07-14 08:53:55 +08:00
if ( ! variable_list_sp )
2011-12-13 09:42:04 +08:00
{
err . SetErrorString ( thisErrorString ) ;
return ;
}
2012-07-14 08:53:55 +08:00
lldb : : VariableSP this_var_sp ( variable_list_sp - > FindVariable ( ConstString ( " this " ) ) ) ;
2011-12-13 09:42:04 +08:00
2012-07-14 08:53:55 +08:00
if ( ! this_var_sp | |
! this_var_sp - > IsInScope ( frame ) | |
! this_var_sp - > LocationIsValidForFrame ( frame ) )
2011-12-13 09:42:04 +08:00
{
err . SetErrorString ( thisErrorString ) ;
return ;
}
2011-11-04 10:09:33 +08:00
}
2011-08-06 07:43:37 +08:00
m_cplusplus = true ;
2011-09-27 02:45:31 +08:00
m_needs_object_ptr = true ;
2010-12-02 05:35:54 +08:00
}
}
2011-08-06 07:43:37 +08:00
else if ( clang : : ObjCMethodDecl * method_decl = llvm : : dyn_cast < clang : : ObjCMethodDecl > ( decl_context ) )
2011-11-04 10:09:33 +08:00
{
2011-11-15 10:11:17 +08:00
if ( m_allow_objc )
2011-09-27 02:45:31 +08:00
{
2011-12-13 09:42:04 +08:00
if ( m_enforce_valid_object )
2011-11-04 10:09:33 +08:00
{
2012-07-14 08:53:55 +08:00
lldb : : VariableListSP variable_list_sp ( function_block - > GetBlockVariableList ( true ) ) ;
2011-12-13 09:42:04 +08:00
const char * selfErrorString = " Stopped in an Objective-C method, but 'self' isn't available; pretending we are in a generic context " ;
2012-07-14 08:53:55 +08:00
if ( ! variable_list_sp )
2011-12-13 09:42:04 +08:00
{
err . SetErrorString ( selfErrorString ) ;
return ;
}
2012-07-14 08:53:55 +08:00
lldb : : VariableSP self_variable_sp = variable_list_sp - > FindVariable ( ConstString ( " self " ) ) ;
2011-12-13 09:42:04 +08:00
2012-07-14 08:53:55 +08:00
if ( ! self_variable_sp | |
! self_variable_sp - > IsInScope ( frame ) | |
! self_variable_sp - > LocationIsValidForFrame ( frame ) )
2011-12-13 09:42:04 +08:00
{
err . SetErrorString ( selfErrorString ) ;
return ;
}
2011-11-04 10:09:33 +08:00
}
2011-08-06 07:43:37 +08:00
m_objectivec = true ;
2011-09-27 02:45:31 +08:00
m_needs_object_ptr = true ;
2011-11-15 10:11:17 +08:00
if ( ! method_decl - > isInstanceMethod ( ) )
m_static_method = true ;
2011-09-27 02:45:31 +08:00
}
2010-12-02 05:35:54 +08:00
}
2012-10-31 07:35:54 +08:00
else if ( clang : : FunctionDecl * function_decl = llvm : : dyn_cast < clang : : FunctionDecl > ( decl_context ) )
{
// We might also have a function that said in the debug information that it captured an
// object pointer. The best way to deal with getting to the ivars at present it by pretending
// that this is a method of a class in whatever runtime the debug info says the object pointer
// belongs to. Do that here.
ClangASTMetadata * metadata = ClangASTContext : : GetMetadata ( & decl_context - > getParentASTContext ( ) , ( uintptr_t ) function_decl ) ;
if ( metadata & & metadata - > HasObjectPtr ( ) )
{
lldb : : LanguageType language = metadata - > GetObjectPtrLanguage ( ) ;
if ( language = = lldb : : eLanguageTypeC_plus_plus )
{
2013-01-19 09:49:02 +08:00
if ( m_enforce_valid_object )
{
lldb : : VariableListSP variable_list_sp ( function_block - > GetBlockVariableList ( true ) ) ;
const char * thisErrorString = " Stopped in a context claiming to capture a C++ object pointer, but 'this' isn't available; pretending we are in a generic context " ;
if ( ! variable_list_sp )
{
err . SetErrorString ( thisErrorString ) ;
return ;
}
lldb : : VariableSP this_var_sp ( variable_list_sp - > FindVariable ( ConstString ( " this " ) ) ) ;
if ( ! this_var_sp | |
! this_var_sp - > IsInScope ( frame ) | |
! this_var_sp - > LocationIsValidForFrame ( frame ) )
{
err . SetErrorString ( thisErrorString ) ;
return ;
}
}
2012-10-31 07:35:54 +08:00
m_cplusplus = true ;
m_needs_object_ptr = true ;
}
else if ( language = = lldb : : eLanguageTypeObjC )
{
2013-01-19 09:49:02 +08:00
if ( m_enforce_valid_object )
{
lldb : : VariableListSP variable_list_sp ( function_block - > GetBlockVariableList ( true ) ) ;
const char * selfErrorString = " Stopped in a context claiming to capture an Objective-C object pointer, but 'self' isn't available; pretending we are in a generic context " ;
if ( ! variable_list_sp )
{
err . SetErrorString ( selfErrorString ) ;
return ;
}
lldb : : VariableSP self_variable_sp = variable_list_sp - > FindVariable ( ConstString ( " self " ) ) ;
if ( ! self_variable_sp | |
! self_variable_sp - > IsInScope ( frame ) | |
! self_variable_sp - > LocationIsValidForFrame ( frame ) )
{
err . SetErrorString ( selfErrorString ) ;
return ;
}
Type * self_type = self_variable_sp - > GetType ( ) ;
if ( ! self_type )
{
err . SetErrorString ( selfErrorString ) ;
return ;
}
lldb : : clang_type_t self_opaque_type = self_type - > GetClangForwardType ( ) ;
if ( ! self_opaque_type )
{
err . SetErrorString ( selfErrorString ) ;
return ;
}
clang : : QualType self_qual_type = clang : : QualType : : getFromOpaquePtr ( self_opaque_type ) ;
if ( self_qual_type - > isObjCClassType ( ) )
{
return ;
}
else if ( self_qual_type - > isObjCObjectPointerType ( ) )
{
m_objectivec = true ;
m_needs_object_ptr = true ;
}
else
{
err . SetErrorString ( selfErrorString ) ;
return ;
}
}
else
{
m_objectivec = true ;
m_needs_object_ptr = true ;
}
2012-10-31 07:35:54 +08:00
}
}
}
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
}
2010-10-23 07:25:16 +08:00
// This is a really nasty hack, meant to fix Objective-C expressions of the form
// (int)[myArray count]. Right now, because the type information for count is
// not available, [myArray count] returns id, which can't be directly cast to
// int without causing a clang error.
static void
ApplyObjcCastHack ( std : : string & expr )
{
# define OBJC_CAST_HACK_FROM "(int)["
# define OBJC_CAST_HACK_TO "(int)(long long)["
size_t from_offset ;
while ( ( from_offset = expr . find ( OBJC_CAST_HACK_FROM ) ) ! = expr . npos )
expr . replace ( from_offset , sizeof ( OBJC_CAST_HACK_FROM ) - 1 , OBJC_CAST_HACK_TO ) ;
# undef OBJC_CAST_HACK_TO
# undef OBJC_CAST_HACK_FROM
}
2010-10-25 04:45:49 +08:00
// Another hack, meant to allow use of unichar despite it not being available in
// the type information. Although we could special-case it in type lookup,
// hopefully we'll figure out a way to #include the same environment as is
// present in the original source file rather than try to hack specific type
// definitions in as needed.
static void
ApplyUnicharHack ( std : : string & expr )
{
# define UNICHAR_HACK_FROM "unichar"
# define UNICHAR_HACK_TO "unsigned short"
size_t from_offset ;
while ( ( from_offset = expr . find ( UNICHAR_HACK_FROM ) ) ! = expr . npos )
expr . replace ( from_offset , sizeof ( UNICHAR_HACK_FROM ) - 1 , UNICHAR_HACK_TO ) ;
# undef UNICHAR_HACK_TO
# undef UNICHAR_HACK_FROM
}
2010-10-23 07:25:16 +08:00
bool
2010-11-19 10:52:21 +08:00
ClangUserExpression : : Parse ( Stream & error_stream ,
ExecutionContext & exe_ctx ,
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
lldb_private : : ExecutionPolicy execution_policy ,
2011-05-07 09:06:41 +08:00
bool keep_result_in_memory )
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
{
2010-11-06 09:53:30 +08:00
lldb : : LogSP log ( lldb_private : : GetLogIfAllCategoriesSet ( LIBLLDB_LOG_EXPRESSIONS ) ) ;
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
2011-11-04 10:09:33 +08:00
Error err ;
2012-02-10 09:22:05 +08:00
InstallContext ( exe_ctx ) ;
2011-11-04 10:09:33 +08:00
ScanContext ( exe_ctx , err ) ;
if ( ! err . Success ( ) )
{
error_stream . Printf ( " warning: %s \n " , err . AsCString ( ) ) ;
}
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
StreamString m_transformed_stream ;
////////////////////////////////////
// Generate the expression
//
2010-10-23 07:25:16 +08:00
ApplyObjcCastHack ( m_expr_text ) ;
2010-10-27 11:32:59 +08:00
//ApplyUnicharHack(m_expr_text);
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
2011-09-27 02:45:31 +08:00
std : : auto_ptr < ExpressionSourceCode > source_code ( ExpressionSourceCode : : CreateWrapped ( m_expr_prefix . c_str ( ) , m_expr_text . c_str ( ) ) ) ;
lldb : : LanguageType lang_type ;
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
if ( m_cplusplus )
2011-09-27 02:45:31 +08:00
lang_type = lldb : : eLanguageTypeC_plus_plus ;
else if ( m_objectivec )
lang_type = lldb : : eLanguageTypeObjC ;
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
else
2011-09-27 02:45:31 +08:00
lang_type = lldb : : eLanguageTypeC ;
2011-11-15 10:11:17 +08:00
if ( ! source_code - > GetText ( m_transformed_text , lang_type , m_const_object , m_static_method ) )
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
{
2011-09-27 02:45:31 +08:00
error_stream . PutCString ( " error: couldn't construct expression body " ) ;
return false ;
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
}
if ( log )
log - > Printf ( " Parsing the following code: \n %s " , m_transformed_text . c_str ( ) ) ;
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
////////////////////////////////////
// Set up the target and compiler
//
2011-09-22 12:58:26 +08:00
Target * target = exe_ctx . GetTargetPtr ( ) ;
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
if ( ! target )
{
error_stream . PutCString ( " error: invalid target \n " ) ;
return false ;
}
//////////////////////////
// Parse the expression
//
2011-12-22 06:22:58 +08:00
2011-10-29 09:58:46 +08:00
m_expr_decl_map . reset ( new ClangExpressionDeclMap ( keep_result_in_memory , exe_ctx ) ) ;
2010-12-03 09:38:59 +08:00
2011-08-02 02:18:33 +08:00
if ( ! m_expr_decl_map - > WillParse ( exe_ctx ) )
{
error_stream . PutCString ( " error: current process state is unsuitable for expression parsing \n " ) ;
return false ;
}
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
2011-09-22 12:58:26 +08:00
Process * process = exe_ctx . GetProcessPtr ( ) ;
2012-02-09 02:43:35 +08:00
ExecutionContextScope * exe_scope = process ;
if ( ! exe_scope )
exe_scope = exe_ctx . GetTargetPtr ( ) ;
ClangExpressionParser parser ( exe_scope , * this ) ;
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
unsigned num_errors = parser . Parse ( error_stream ) ;
if ( num_errors )
{
error_stream . Printf ( " error: %d errors parsing expression \n " , num_errors ) ;
2010-12-03 09:38:59 +08:00
m_expr_decl_map - > DidParse ( ) ;
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
return false ;
}
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
//////////////////////////////////////////////////////////////////////////////////////////
// Prepare the output of the parser for execution, evaluating it statically if possible
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
//
2013-03-19 08:10:07 +08:00
Error jit_error = parser . PrepareForExecution ( m_jit_start_addr ,
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
m_jit_end_addr ,
exe_ctx ,
m_evaluated_statically ,
m_const_result ,
execution_policy ) ;
2011-10-13 06:20:02 +08:00
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
if ( jit_error . Success ( ) )
{
2013-03-19 08:10:07 +08:00
if ( process & & m_jit_start_addr ! = LLDB_INVALID_ADDRESS )
2012-09-18 08:08:47 +08:00
m_jit_process_wp = lldb : : ProcessWP ( process - > shared_from_this ( ) ) ;
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
return true ;
}
else
{
2011-05-17 11:51:29 +08:00
const char * error_cstr = jit_error . AsCString ( ) ;
if ( error_cstr & & error_cstr [ 0 ] )
error_stream . Printf ( " error: %s \n " , error_cstr ) ;
else
2011-09-21 05:44:10 +08:00
error_stream . Printf ( " error: expression can't be interpreted or run \n " ) ;
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
return false ;
}
}
bool
2010-10-15 07:45:03 +08:00
ClangUserExpression : : PrepareToExecuteJITExpression ( Stream & error_stream ,
2010-10-20 07:57:21 +08:00
ExecutionContext & exe_ctx ,
lldb : : addr_t & struct_address ,
2010-12-14 08:42:36 +08:00
lldb : : addr_t & object_ptr ,
lldb : : addr_t & cmd_ptr )
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
{
2010-11-06 09:53:30 +08:00
lldb : : LogSP log ( lldb_private : : GetLogIfAllCategoriesSet ( LIBLLDB_LOG_EXPRESSIONS ) ) ;
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
2012-02-10 09:22:05 +08:00
lldb : : TargetSP target ;
lldb : : ProcessSP process ;
lldb : : StackFrameSP frame ;
if ( ! LockAndCheckContext ( exe_ctx ,
target ,
process ,
frame ) )
{
error_stream . Printf ( " The context has changed before we could JIT the expression! " ) ;
return false ;
}
2011-01-20 07:00:49 +08:00
if ( m_jit_start_addr ! = LLDB_INVALID_ADDRESS )
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
{
Error materialize_error ;
2010-12-14 06:46:15 +08:00
if ( m_needs_object_ptr )
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
{
2010-12-14 06:46:15 +08:00
ConstString object_name ;
if ( m_cplusplus )
{
object_name . SetCString ( " this " ) ;
}
else if ( m_objectivec )
{
object_name . SetCString ( " self " ) ;
}
else
{
error_stream . Printf ( " Need object pointer but don't know the language \n " ) ;
return false ;
}
2012-02-10 09:22:05 +08:00
if ( ! ( m_expr_decl_map - > GetObjectPointer ( object_ptr , object_name , materialize_error ) ) )
2010-12-14 06:46:15 +08:00
{
2011-12-13 09:42:04 +08:00
error_stream . Printf ( " warning: couldn't get required object pointer (substituting NULL): %s \n " , materialize_error . AsCString ( ) ) ;
object_ptr = 0 ;
2010-12-14 06:46:15 +08:00
}
2010-12-14 08:42:36 +08:00
if ( m_objectivec )
{
ConstString cmd_name ( " _cmd " ) ;
2012-02-10 09:22:05 +08:00
if ( ! ( m_expr_decl_map - > GetObjectPointer ( cmd_ptr , cmd_name , materialize_error , true ) ) )
2010-12-14 08:42:36 +08:00
{
2011-12-13 09:42:04 +08:00
error_stream . Printf ( " warning: couldn't get object pointer (substituting NULL): %s \n " , materialize_error . AsCString ( ) ) ;
cmd_ptr = 0 ;
2010-12-14 08:42:36 +08:00
}
}
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
}
2012-02-10 09:22:05 +08:00
if ( ! m_expr_decl_map - > Materialize ( struct_address , materialize_error ) )
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
{
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
error_stream . Printf ( " Couldn't materialize struct: %s \n " , materialize_error . AsCString ( ) ) ;
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
return false ;
}
2011-01-19 03:36:39 +08:00
#if 0
// jingham: look here
StreamFile logfile ( " /tmp/exprs.txt " , " a " ) ;
2012-11-30 05:49:15 +08:00
logfile . Printf ( " 0x%16.16 " PRIx64 " : thread = 0x%4.4x, expr = '%s' \n " , m_jit_start_addr , exe_ctx . thread ? exe_ctx . thread - > GetID ( ) : - 1 , m_expr_text . c_str ( ) ) ;
2011-01-19 03:36:39 +08:00
# endif
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
if ( log )
{
2010-12-08 06:55:01 +08:00
log - > Printf ( " -- [ClangUserExpression::PrepareToExecuteJITExpression] Materializing for execution -- " ) ;
2010-12-07 18:00:20 +08:00
2012-11-30 05:49:15 +08:00
log - > Printf ( " Function address : 0x% " PRIx64 , ( uint64_t ) m_jit_start_addr ) ;
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
if ( m_needs_object_ptr )
2012-11-30 05:49:15 +08:00
log - > Printf ( " Object pointer : 0x% " PRIx64 , ( uint64_t ) object_ptr ) ;
Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
2010-09-21 08:44:12 +08:00
2012-11-30 05:49:15 +08:00
log - > Printf ( " Structure address : 0x% " PRIx64 , ( uint64_t ) struct_address ) ;
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
StreamString args ;
Error dump_error ;
2010-09-14 05:34:21 +08:00
if ( struct_address )
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
{
2012-02-10 09:22:05 +08:00
if ( ! m_expr_decl_map - > DumpMaterializedStruct ( args , dump_error ) )
2010-09-14 05:34:21 +08:00
{
2010-12-07 18:00:20 +08:00
log - > Printf ( " Couldn't extract variable values : %s " , dump_error . AsCString ( " unknown error " ) ) ;
2010-09-14 05:34:21 +08:00
}
else
{
2010-12-07 18:00:20 +08:00
log - > Printf ( " Structure contents: \n %s " , args . GetData ( ) ) ;
2010-09-14 05:34:21 +08:00
}
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
}
}
2010-10-15 07:45:03 +08:00
}
return true ;
}
ThreadPlan *
ClangUserExpression : : GetThreadPlanToExecuteJITExpression ( Stream & error_stream ,
2011-01-13 16:53:35 +08:00
ExecutionContext & exe_ctx )
2010-10-15 07:45:03 +08:00
{
lldb : : addr_t struct_address ;
2011-07-20 03:48:13 +08:00
lldb : : addr_t object_ptr = 0 ;
lldb : : addr_t cmd_ptr = 0 ;
2010-10-15 07:45:03 +08:00
2010-12-14 08:42:36 +08:00
PrepareToExecuteJITExpression ( error_stream , exe_ctx , struct_address , object_ptr , cmd_ptr ) ;
2010-10-15 07:45:03 +08:00
2010-11-30 10:22:11 +08:00
// FIXME: This should really return a ThreadPlanCallUserExpression, in order to make sure that we don't release the
// ClangUserExpression resources before the thread plan finishes execution in the target. But because we are
2010-12-14 06:46:15 +08:00
// forcing unwind_on_error to be true here, in practical terms that can't happen.
2013-01-15 10:47:48 +08:00
const bool stop_others = true ;
const bool unwind_on_error = true ;
const bool ignore_breakpoints = false ;
2010-10-15 07:45:03 +08:00
return ClangFunction : : GetThreadPlanToCallFunction ( exe_ctx ,
2011-01-20 07:00:49 +08:00
m_jit_start_addr ,
2010-12-01 09:28:23 +08:00
struct_address ,
error_stream ,
2013-01-15 10:47:48 +08:00
stop_others ,
unwind_on_error ,
ignore_breakpoints ,
2010-12-14 06:46:15 +08:00
( m_needs_object_ptr ? & object_ptr : NULL ) ,
( m_needs_object_ptr & & m_objectivec ) ? & cmd_ptr : NULL ) ;
2010-10-15 07:45:03 +08:00
}
bool
ClangUserExpression : : FinalizeJITExecution ( Stream & error_stream ,
ExecutionContext & exe_ctx ,
2011-05-10 06:04:36 +08:00
lldb : : ClangExpressionVariableSP & result ,
lldb : : addr_t function_stack_pointer )
2010-10-15 07:45:03 +08:00
{
Error expr_error ;
2010-12-07 18:00:20 +08:00
lldb : : LogSP log ( lldb_private : : GetLogIfAllCategoriesSet ( LIBLLDB_LOG_EXPRESSIONS ) ) ;
if ( log )
{
2010-12-08 06:55:01 +08:00
log - > Printf ( " -- [ClangUserExpression::FinalizeJITExecution] Dematerializing after execution -- " ) ;
2010-12-07 18:00:20 +08:00
StreamString args ;
Error dump_error ;
2012-02-10 09:22:05 +08:00
if ( ! m_expr_decl_map - > DumpMaterializedStruct ( args , dump_error ) )
2010-12-07 18:00:20 +08:00
{
log - > Printf ( " Couldn't extract variable values : %s " , dump_error . AsCString ( " unknown error " ) ) ;
}
else
{
log - > Printf ( " Structure contents: \n %s " , args . GetData ( ) ) ;
}
}
2011-05-10 06:04:36 +08:00
lldb : : addr_t function_stack_bottom = function_stack_pointer - Host : : GetPageSize ( ) ;
2010-12-07 18:00:20 +08:00
2012-02-10 09:22:05 +08:00
if ( ! m_expr_decl_map - > Dematerialize ( result , function_stack_pointer , function_stack_bottom , expr_error ) )
2010-10-15 07:45:03 +08:00
{
error_stream . Printf ( " Couldn't dematerialize struct : %s \n " , expr_error . AsCString ( " unknown error " ) ) ;
return false ;
}
2011-10-13 06:20:02 +08:00
2012-01-06 08:35:38 +08:00
if ( result )
result - > TransferAddress ( ) ;
2010-10-15 07:45:03 +08:00
return true ;
}
2011-03-25 05:19:54 +08:00
ExecutionResults
2010-10-15 07:45:03 +08:00
ClangUserExpression : : Execute ( Stream & error_stream ,
ExecutionContext & exe_ctx ,
2013-01-15 10:47:48 +08:00
bool unwind_on_error ,
bool ignore_breakpoints ,
2010-11-30 10:22:11 +08:00
ClangUserExpression : : ClangUserExpressionSP & shared_ptr_to_me ,
2012-07-17 07:10:35 +08:00
lldb : : ClangExpressionVariableSP & result ,
2012-10-17 05:41:58 +08:00
bool run_others ,
uint32_t timeout_usec )
2010-10-15 07:45:03 +08:00
{
2011-01-19 06:20:08 +08:00
// The expression log is quite verbose, and if you're just tracking the execution of the
// expression, it's quite convenient to have these logs come out with the STEP log as well.
lldb : : LogSP log ( lldb_private : : GetLogIfAnyCategoriesSet ( LIBLLDB_LOG_EXPRESSIONS | LIBLLDB_LOG_STEP ) ) ;
2010-12-07 18:00:20 +08:00
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
if ( m_jit_start_addr ! = LLDB_INVALID_ADDRESS )
2010-10-15 07:45:03 +08:00
{
2012-10-13 01:34:26 +08:00
lldb : : addr_t struct_address = LLDB_INVALID_ADDRESS ;
2010-10-15 07:45:03 +08:00
2011-07-20 03:48:13 +08:00
lldb : : addr_t object_ptr = 0 ;
lldb : : addr_t cmd_ptr = 0 ;
2010-10-15 07:45:03 +08:00
2012-08-18 12:24:00 +08:00
if ( ! PrepareToExecuteJITExpression ( error_stream , exe_ctx , struct_address , object_ptr , cmd_ptr ) )
{
2012-08-18 12:14:54 +08:00
error_stream . Printf ( " Errored out in %s, couldn't PrepareToExecuteJITExpression " , __FUNCTION__ ) ;
2011-03-25 05:19:54 +08:00
return eExecutionSetupError ;
2012-08-18 12:14:54 +08:00
}
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
2010-11-06 03:25:48 +08:00
const bool stop_others = true ;
2013-02-09 09:29:05 +08:00
const bool try_all_threads = run_others ;
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
2012-02-24 09:59:29 +08:00
Address wrapper_address ( m_jit_start_addr ) ;
2011-09-22 12:58:26 +08:00
lldb : : ThreadPlanSP call_plan_sp ( new ThreadPlanCallUserExpression ( exe_ctx . GetThreadRef ( ) ,
2010-12-14 06:46:15 +08:00
wrapper_address ,
struct_address ,
stop_others ,
2013-01-15 10:47:48 +08:00
unwind_on_error ,
ignore_breakpoints ,
2010-12-14 06:46:15 +08:00
( m_needs_object_ptr ? & object_ptr : NULL ) ,
( ( m_needs_object_ptr & & m_objectivec ) ? & cmd_ptr : NULL ) ,
shared_ptr_to_me ) ) ;
2012-08-09 08:50:26 +08:00
if ( ! call_plan_sp | | ! call_plan_sp - > ValidatePlan ( NULL ) )
2011-03-25 05:19:54 +08:00
return eExecutionSetupError ;
2011-05-10 06:04:36 +08:00
lldb : : addr_t function_stack_pointer = static_cast < ThreadPlanCallFunction * > ( call_plan_sp . get ( ) ) - > GetFunctionStackPointer ( ) ;
2012-12-08 03:04:31 +08:00
2010-12-07 18:00:20 +08:00
if ( log )
2010-12-08 06:55:01 +08:00
log - > Printf ( " -- [ClangUserExpression::Execute] Execution of expression begins -- " ) ;
2010-12-07 18:00:20 +08:00
2011-11-08 11:00:11 +08:00
if ( exe_ctx . GetProcessPtr ( ) )
exe_ctx . GetProcessPtr ( ) - > SetRunningUserExpression ( true ) ;
2011-09-22 12:58:26 +08:00
ExecutionResults execution_result = exe_ctx . GetProcessRef ( ) . RunThreadPlan ( exe_ctx ,
call_plan_sp ,
stop_others ,
try_all_threads ,
2013-01-15 10:47:48 +08:00
unwind_on_error ,
ignore_breakpoints ,
2012-10-17 05:41:58 +08:00
timeout_usec ,
2011-09-22 12:58:26 +08:00
error_stream ) ;
2010-12-07 18:00:20 +08:00
2011-11-08 11:00:11 +08:00
if ( exe_ctx . GetProcessPtr ( ) )
exe_ctx . GetProcessPtr ( ) - > SetRunningUserExpression ( false ) ;
2010-12-07 18:00:20 +08:00
if ( log )
2010-12-08 06:55:01 +08:00
log - > Printf ( " -- [ClangUserExpression::Execute] Execution of expression completed -- " ) ;
2010-11-30 10:22:11 +08:00
2013-01-15 10:47:48 +08:00
if ( execution_result = = eExecutionInterrupted | | execution_result = = eExecutionHitBreakpoint )
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
{
2011-05-17 09:10:11 +08:00
const char * error_desc = NULL ;
if ( call_plan_sp )
{
lldb : : StopInfoSP real_stop_info_sp = call_plan_sp - > GetRealStopInfo ( ) ;
if ( real_stop_info_sp )
error_desc = real_stop_info_sp - > GetDescription ( ) ;
}
if ( error_desc )
error_stream . Printf ( " Execution was interrupted, reason: %s. " , error_desc ) ;
else
2011-09-21 05:44:10 +08:00
error_stream . Printf ( " Execution was interrupted. " ) ;
2011-05-17 09:10:11 +08:00
2013-01-15 10:47:48 +08:00
if ( ( execution_result = = eExecutionInterrupted & & unwind_on_error )
| | ( execution_result = = eExecutionHitBreakpoint & & ignore_breakpoints ) )
2013-02-01 05:46:01 +08:00
error_stream . Printf ( " \n The process has been returned to the state before expression evaluation. " ) ;
2010-11-30 10:22:11 +08:00
else
2013-02-01 05:46:01 +08:00
error_stream . Printf ( " \n The process has been left at the point where it was interrupted, use \" thread return -x \" to return to the state before expression evaluation. " ) ;
2010-11-30 10:22:11 +08:00
return execution_result ;
}
2011-03-25 05:19:54 +08:00
else if ( execution_result ! = eExecutionCompleted )
2010-11-30 10:22:11 +08:00
{
error_stream . Printf ( " Couldn't execute function; result was %s \n " , Process : : ExecutionResultAsCString ( execution_result ) ) ;
return execution_result ;
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
}
2011-05-10 06:04:36 +08:00
if ( FinalizeJITExecution ( error_stream , exe_ctx , result , function_stack_pointer ) )
2011-03-25 05:19:54 +08:00
return eExecutionCompleted ;
2010-11-30 10:22:11 +08:00
else
2012-08-18 12:24:00 +08:00
{
2012-08-18 12:14:54 +08:00
error_stream . Printf ( " Errored out in %s: Couldn't FinalizeJITExpression " , __FUNCTION__ ) ;
2011-03-25 05:19:54 +08:00
return eExecutionSetupError ;
2012-08-18 12:24:00 +08:00
}
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
}
else
{
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
error_stream . Printf ( " Expression can't be run, because there is no JIT compiled function " ) ;
2011-03-25 05:19:54 +08:00
return eExecutionSetupError ;
This is a major refactoring of the expression parser.
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
2010-08-27 09:01:44 +08:00
}
}
2011-03-25 05:19:54 +08:00
ExecutionResults
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
ClangUserExpression : : Evaluate ( ExecutionContext & exe_ctx ,
lldb_private : : ExecutionPolicy execution_policy ,
2011-11-08 07:35:40 +08:00
lldb : : LanguageType language ,
2011-12-22 06:22:58 +08:00
ResultType desired_type ,
2013-01-15 10:47:48 +08:00
bool unwind_on_error ,
bool ignore_breakpoints ,
2010-10-29 08:29:03 +08:00
const char * expr_cstr ,
2010-11-30 10:22:11 +08:00
const char * expr_prefix ,
2012-07-17 07:10:35 +08:00
lldb : : ValueObjectSP & result_valobj_sp ,
2012-10-17 05:41:58 +08:00
bool run_others ,
uint32_t timeout_usec )
2011-08-09 08:00:49 +08:00
{
Error error ;
2012-10-17 05:41:58 +08:00
return EvaluateWithError ( exe_ctx ,
execution_policy ,
language ,
desired_type ,
2013-01-15 10:47:48 +08:00
unwind_on_error ,
ignore_breakpoints ,
2012-10-17 05:41:58 +08:00
expr_cstr ,
expr_prefix ,
result_valobj_sp ,
error ,
run_others ,
timeout_usec ) ;
2011-08-09 08:00:49 +08:00
}
ExecutionResults
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
ClangUserExpression : : EvaluateWithError ( ExecutionContext & exe_ctx ,
lldb_private : : ExecutionPolicy execution_policy ,
2011-11-08 07:35:40 +08:00
lldb : : LanguageType language ,
2011-12-22 06:22:58 +08:00
ResultType desired_type ,
2013-01-15 10:47:48 +08:00
bool unwind_on_error ,
bool ignore_breakpoints ,
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
const char * expr_cstr ,
const char * expr_prefix ,
lldb : : ValueObjectSP & result_valobj_sp ,
2012-07-17 07:10:35 +08:00
Error & error ,
2012-10-17 05:41:58 +08:00
bool run_others ,
uint32_t timeout_usec )
2010-10-05 08:31:29 +08:00
{
2011-01-19 06:20:08 +08:00
lldb : : LogSP log ( lldb_private : : GetLogIfAnyCategoriesSet ( LIBLLDB_LOG_EXPRESSIONS | LIBLLDB_LOG_STEP ) ) ;
2010-12-08 06:55:01 +08:00
2011-03-25 05:19:54 +08:00
ExecutionResults execution_results = eExecutionSetupError ;
2010-11-04 09:54:29 +08:00
2011-09-22 12:58:26 +08:00
Process * process = exe_ctx . GetProcessPtr ( ) ;
if ( process = = NULL | | process - > GetState ( ) ! = lldb : : eStateStopped )
2010-11-30 10:22:11 +08:00
{
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
if ( execution_policy = = eExecutionPolicyAlways )
{
if ( log )
log - > Printf ( " == [ClangUserExpression::Evaluate] Expression may not run, but is not constant == " ) ;
2010-11-30 10:22:11 +08:00
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
error . SetErrorString ( " expression needed to run but couldn't " ) ;
return execution_results ;
}
2010-11-30 10:22:11 +08:00
}
2011-09-16 01:43:00 +08:00
2011-09-22 12:58:26 +08:00
if ( process = = NULL | | ! process - > CanJIT ( ) )
2011-09-16 01:43:00 +08:00
execution_policy = eExecutionPolicyNever ;
2010-11-04 09:54:29 +08:00
2011-12-22 06:22:58 +08:00
ClangUserExpressionSP user_expression_sp ( new ClangUserExpression ( expr_cstr , expr_prefix , language , desired_type ) ) ;
2010-11-30 10:22:11 +08:00
2010-10-05 08:31:29 +08:00
StreamString error_stream ;
2011-05-07 09:06:41 +08:00
2010-12-08 06:55:01 +08:00
if ( log )
log - > Printf ( " == [ClangUserExpression::Evaluate] Parsing expression %s == " , expr_cstr ) ;
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
const bool keep_expression_in_memory = true ;
2011-12-22 06:22:58 +08:00
if ( ! user_expression_sp - > Parse ( error_stream , exe_ctx , execution_policy , keep_expression_in_memory ) )
2010-10-05 08:31:29 +08:00
{
if ( error_stream . GetString ( ) . empty ( ) )
error . SetErrorString ( " expression failed to parse, unknown error " ) ;
else
error . SetErrorString ( error_stream . GetString ( ) . c_str ( ) ) ;
}
else
{
2010-12-14 10:59:59 +08:00
lldb : : ClangExpressionVariableSP expr_result ;
2010-10-05 08:31:29 +08:00
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
if ( user_expression_sp - > EvaluatedStatically ( ) )
2010-10-05 08:31:29 +08:00
{
2010-12-08 06:55:01 +08:00
if ( log )
2010-12-16 11:17:46 +08:00
log - > Printf ( " == [ClangUserExpression::Evaluate] Expression evaluated as a constant == " ) ;
2010-12-08 06:55:01 +08:00
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
if ( user_expression_sp - > m_const_result )
result_valobj_sp = user_expression_sp - > m_const_result - > GetValueObject ( ) ;
else
error . SetError ( ClangUserExpression : : kNoResult , lldb : : eErrorTypeGeneric ) ;
2011-08-09 08:00:49 +08:00
execution_results = eExecutionCompleted ;
2010-10-05 08:31:29 +08:00
}
This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
2011-09-15 10:13:07 +08:00
else if ( execution_policy = = eExecutionPolicyNever )
{
if ( log )
log - > Printf ( " == [ClangUserExpression::Evaluate] Expression may not run, but is not constant == " ) ;
if ( error_stream . GetString ( ) . empty ( ) )
error . SetErrorString ( " expression needed to run but couldn't " ) ;
}
2010-12-16 11:17:46 +08:00
else
{
error_stream . GetString ( ) . clear ( ) ;
if ( log )
log - > Printf ( " == [ClangUserExpression::Evaluate] Executing expression == " ) ;
execution_results = user_expression_sp - > Execute ( error_stream ,
exe_ctx ,
2013-01-15 10:47:48 +08:00
unwind_on_error ,
ignore_breakpoints ,
2010-12-16 11:17:46 +08:00
user_expression_sp ,
2012-07-17 07:10:35 +08:00
expr_result ,
2012-10-17 05:41:58 +08:00
run_others ,
timeout_usec ) ;
2010-12-16 11:17:46 +08:00
2011-03-25 05:19:54 +08:00
if ( execution_results ! = eExecutionCompleted )
2010-10-05 08:31:29 +08:00
{
2010-12-08 06:55:01 +08:00
if ( log )
2010-12-16 11:17:46 +08:00
log - > Printf ( " == [ClangUserExpression::Evaluate] Execution completed abnormally == " ) ;
if ( error_stream . GetString ( ) . empty ( ) )
error . SetErrorString ( " expression failed to execute, unknown error " ) ;
else
error . SetErrorString ( error_stream . GetString ( ) . c_str ( ) ) ;
2010-10-05 08:31:29 +08:00
}
2010-12-16 11:17:46 +08:00
else
2010-10-05 08:31:29 +08:00
{
2010-12-16 11:17:46 +08:00
if ( expr_result )
{
result_valobj_sp = expr_result - > GetValueObject ( ) ;
if ( log )
2011-03-31 08:19:25 +08:00
log - > Printf ( " == [ClangUserExpression::Evaluate] Execution completed normally with result %s == " , result_valobj_sp - > GetValueAsCString ( ) ) ;
2010-12-16 11:17:46 +08:00
}
else
{
if ( log )
log - > Printf ( " == [ClangUserExpression::Evaluate] Execution completed normally with no result == " ) ;
2011-08-24 05:20:51 +08:00
error . SetError ( ClangUserExpression : : kNoResult , lldb : : eErrorTypeGeneric ) ;
2010-12-16 11:17:46 +08:00
}
2010-10-05 08:31:29 +08:00
}
}
}
2010-10-20 04:15:00 +08:00
2010-10-05 11:13:51 +08:00
if ( result_valobj_sp . get ( ) = = NULL )
2011-04-23 07:53:53 +08:00
result_valobj_sp = ValueObjectConstResult : : Create ( NULL , error ) ;
2010-10-05 11:13:51 +08:00
2010-11-30 10:22:11 +08:00
return execution_results ;
2010-10-30 04:19:44 +08:00
}
