llvm-project/llvm/test/CodeGen/X86/vector-shuffle-128-v4.ll

1892 lines
63 KiB
LLVM
Raw Normal View History

; RUN: llc < %s -mtriple=x86_64-unknown-unknown -mcpu=x86-64 | FileCheck %s --check-prefix=ALL --check-prefix=SSE --check-prefix=SSE2
; RUN: llc < %s -mtriple=x86_64-unknown-unknown -mcpu=x86-64 -mattr=+sse3 | FileCheck %s --check-prefix=ALL --check-prefix=SSE --check-prefix=SSE3
; RUN: llc < %s -mtriple=x86_64-unknown-unknown -mcpu=x86-64 -mattr=+ssse3 | FileCheck %s --check-prefix=ALL --check-prefix=SSE --check-prefix=SSSE3
; RUN: llc < %s -mtriple=x86_64-unknown-unknown -mcpu=x86-64 -mattr=+sse4.1 | FileCheck %s --check-prefix=ALL --check-prefix=SSE --check-prefix=SSE41
; RUN: llc < %s -mtriple=x86_64-unknown-unknown -mcpu=x86-64 -mattr=+avx | FileCheck %s --check-prefix=ALL --check-prefix=AVX --check-prefix=AVX1
; RUN: llc < %s -mtriple=x86_64-unknown-unknown -mcpu=x86-64 -mattr=+avx2 | FileCheck %s --check-prefix=ALL --check-prefix=AVX --check-prefix=AVX2
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-unknown-unknown"
define <4 x i32> @shuffle_v4i32_0001(<4 x i32> %a, <4 x i32> %b) {
; SSE-LABEL: shuffle_v4i32_0001:
; SSE: # BB#0:
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,0,0,1]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_0001:
; AVX: # BB#0:
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,0,0,1]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 0, i32 0, i32 1>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_0020(<4 x i32> %a, <4 x i32> %b) {
; SSE-LABEL: shuffle_v4i32_0020:
; SSE: # BB#0:
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,0,2,0]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_0020:
; AVX: # BB#0:
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,0,2,0]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 0, i32 2, i32 0>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_0112(<4 x i32> %a, <4 x i32> %b) {
; SSE-LABEL: shuffle_v4i32_0112:
; SSE: # BB#0:
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,1,2]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_0112:
; AVX: # BB#0:
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,1,1,2]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 1, i32 1, i32 2>
ret <4 x i32> %shuffle
}
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
define <4 x i32> @shuffle_v4i32_0300(<4 x i32> %a, <4 x i32> %b) {
; SSE-LABEL: shuffle_v4i32_0300:
; SSE: # BB#0:
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,3,0,0]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_0300:
; AVX: # BB#0:
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,3,0,0]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 3, i32 0, i32 0>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_1000(<4 x i32> %a, <4 x i32> %b) {
; SSE-LABEL: shuffle_v4i32_1000:
; SSE: # BB#0:
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[1,0,0,0]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_1000:
; AVX: # BB#0:
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[1,0,0,0]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 1, i32 0, i32 0, i32 0>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_2200(<4 x i32> %a, <4 x i32> %b) {
; SSE-LABEL: shuffle_v4i32_2200:
; SSE: # BB#0:
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[2,2,0,0]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_2200:
; AVX: # BB#0:
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[2,2,0,0]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 2, i32 2, i32 0, i32 0>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_3330(<4 x i32> %a, <4 x i32> %b) {
; SSE-LABEL: shuffle_v4i32_3330:
; SSE: # BB#0:
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[3,3,3,0]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_3330:
; AVX: # BB#0:
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[3,3,3,0]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 3, i32 3, i32 3, i32 0>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_3210(<4 x i32> %a, <4 x i32> %b) {
; SSE-LABEL: shuffle_v4i32_3210:
; SSE: # BB#0:
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[3,2,1,0]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_3210:
; AVX: # BB#0:
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[3,2,1,0]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 3, i32 2, i32 1, i32 0>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_2121(<4 x i32> %a, <4 x i32> %b) {
; SSE-LABEL: shuffle_v4i32_2121:
; SSE: # BB#0:
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[2,1,2,1]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_2121:
; AVX: # BB#0:
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[2,1,2,1]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 2, i32 1, i32 2, i32 1>
ret <4 x i32> %shuffle
}
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
define <4 x float> @shuffle_v4f32_0001(<4 x float> %a, <4 x float> %b) {
; SSE-LABEL: shuffle_v4f32_0001:
; SSE: # BB#0:
; SSE-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,0,0,1]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_0001:
; AVX: # BB#0:
; AVX-NEXT: vpermilps {{.*#+}} xmm0 = xmm0[0,0,0,1]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 0, i32 0, i32 0, i32 1>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_0020(<4 x float> %a, <4 x float> %b) {
; SSE-LABEL: shuffle_v4f32_0020:
; SSE: # BB#0:
; SSE-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,0,2,0]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_0020:
; AVX: # BB#0:
; AVX-NEXT: vpermilps {{.*#+}} xmm0 = xmm0[0,0,2,0]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 0, i32 0, i32 2, i32 0>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_0300(<4 x float> %a, <4 x float> %b) {
; SSE-LABEL: shuffle_v4f32_0300:
; SSE: # BB#0:
; SSE-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,3,0,0]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_0300:
; AVX: # BB#0:
; AVX-NEXT: vpermilps {{.*#+}} xmm0 = xmm0[0,3,0,0]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 0, i32 3, i32 0, i32 0>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_1000(<4 x float> %a, <4 x float> %b) {
; SSE-LABEL: shuffle_v4f32_1000:
; SSE: # BB#0:
; SSE-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,0,0,0]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_1000:
; AVX: # BB#0:
; AVX-NEXT: vpermilps {{.*#+}} xmm0 = xmm0[1,0,0,0]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 1, i32 0, i32 0, i32 0>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_2200(<4 x float> %a, <4 x float> %b) {
; SSE-LABEL: shuffle_v4f32_2200:
; SSE: # BB#0:
; SSE-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,2,0,0]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_2200:
; AVX: # BB#0:
; AVX-NEXT: vpermilps {{.*#+}} xmm0 = xmm0[2,2,0,0]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 2, i32 2, i32 0, i32 0>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_3330(<4 x float> %a, <4 x float> %b) {
; SSE-LABEL: shuffle_v4f32_3330:
; SSE: # BB#0:
; SSE-NEXT: shufps {{.*#+}} xmm0 = xmm0[3,3,3,0]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_3330:
; AVX: # BB#0:
; AVX-NEXT: vpermilps {{.*#+}} xmm0 = xmm0[3,3,3,0]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 3, i32 3, i32 3, i32 0>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_3210(<4 x float> %a, <4 x float> %b) {
; SSE-LABEL: shuffle_v4f32_3210:
; SSE: # BB#0:
; SSE-NEXT: shufps {{.*#+}} xmm0 = xmm0[3,2,1,0]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_3210:
; AVX: # BB#0:
; AVX-NEXT: vpermilps {{.*#+}} xmm0 = xmm0[3,2,1,0]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 3, i32 2, i32 1, i32 0>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_0011(<4 x float> %a, <4 x float> %b) {
; SSE-LABEL: shuffle_v4f32_0011:
; SSE: # BB#0:
; SSE-NEXT: unpcklps {{.*#+}} xmm0 = xmm0[0,0,1,1]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_0011:
; AVX: # BB#0:
; AVX-NEXT: vunpcklps {{.*#+}} xmm0 = xmm0[0,0,1,1]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 0, i32 0, i32 1, i32 1>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_2233(<4 x float> %a, <4 x float> %b) {
; SSE-LABEL: shuffle_v4f32_2233:
; SSE: # BB#0:
; SSE-NEXT: unpckhps {{.*#+}} xmm0 = xmm0[2,2,3,3]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_2233:
; AVX: # BB#0:
; AVX-NEXT: vunpckhps {{.*#+}} xmm0 = xmm0[2,2,3,3]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 2, i32 2, i32 3, i32 3>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_0022(<4 x float> %a, <4 x float> %b) {
; SSE2-LABEL: shuffle_v4f32_0022:
; SSE2: # BB#0:
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,0,2,2]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4f32_0022:
; SSE3: # BB#0:
; SSE3-NEXT: movsldup {{.*#+}} xmm0 = xmm0[0,0,2,2]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4f32_0022:
; SSSE3: # BB#0:
; SSSE3-NEXT: movsldup {{.*#+}} xmm0 = xmm0[0,0,2,2]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4f32_0022:
; SSE41: # BB#0:
; SSE41-NEXT: movsldup {{.*#+}} xmm0 = xmm0[0,0,2,2]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_0022:
; AVX: # BB#0:
; AVX-NEXT: vmovsldup {{.*#+}} xmm0 = xmm0[0,0,2,2]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 0, i32 0, i32 2, i32 2>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_1133(<4 x float> %a, <4 x float> %b) {
; SSE2-LABEL: shuffle_v4f32_1133:
; SSE2: # BB#0:
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,1,3,3]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4f32_1133:
; SSE3: # BB#0:
; SSE3-NEXT: movshdup {{.*#+}} xmm0 = xmm0[1,1,3,3]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4f32_1133:
; SSSE3: # BB#0:
; SSSE3-NEXT: movshdup {{.*#+}} xmm0 = xmm0[1,1,3,3]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4f32_1133:
; SSE41: # BB#0:
; SSE41-NEXT: movshdup {{.*#+}} xmm0 = xmm0[1,1,3,3]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_1133:
; AVX: # BB#0:
; AVX-NEXT: vmovshdup {{.*#+}} xmm0 = xmm0[1,1,3,3]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 1, i32 1, i32 3, i32 3>
ret <4 x float> %shuffle
}
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
define <4 x i32> @shuffle_v4i32_0124(<4 x i32> %a, <4 x i32> %b) {
; SSE2-LABEL: shuffle_v4i32_0124:
; SSE2: # BB#0:
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[2,0]
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,0]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_0124:
; SSE3: # BB#0:
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[2,0]
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,0]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_0124:
; SSSE3: # BB#0:
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[2,0]
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,0]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_0124:
; SSE41: # BB#0:
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE41-NEXT: pshufd {{.*#+}} xmm1 = xmm1[0,1,2,0]
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1,2,3,4,5],xmm1[6,7]
; SSE41-NEXT: retq
;
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; AVX1-LABEL: shuffle_v4i32_0124:
; AVX1: # BB#0:
; AVX1-NEXT: vpshufd {{.*#+}} xmm1 = xmm1[0,1,2,0]
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1,2,3,4,5],xmm1[6,7]
; AVX1-NEXT: retq
;
; AVX2-LABEL: shuffle_v4i32_0124:
; AVX2: # BB#0:
; AVX2-NEXT: vpbroadcastd %xmm1, %xmm1
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0,1,2],xmm1[3]
; AVX2-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 1, i32 2, i32 4>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_0142(<4 x i32> %a, <4 x i32> %b) {
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE2-LABEL: shuffle_v4i32_0142:
; SSE2: # BB#0:
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[2,0]
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[0,2]
; SSE2-NEXT: retq
;
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE3-LABEL: shuffle_v4i32_0142:
; SSE3: # BB#0:
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[2,0]
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[0,2]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_0142:
; SSSE3: # BB#0:
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[2,0]
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[0,2]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_0142:
; SSE41: # BB#0:
; SSE41-NEXT: pshufd {{.*#+}} xmm1 = xmm1[0,1,0,1]
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,2,2]
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1,2,3],xmm1[4,5],xmm0[6,7]
; SSE41-NEXT: retq
;
; AVX1-LABEL: shuffle_v4i32_0142:
; AVX1: # BB#0:
; AVX1-NEXT: vpshufd {{.*#+}} xmm1 = xmm1[0,1,0,1]
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,1,2,2]
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1,2,3],xmm1[4,5],xmm0[6,7]
; AVX1-NEXT: retq
;
; AVX2-LABEL: shuffle_v4i32_0142:
; AVX2: # BB#0:
; AVX2-NEXT: vpbroadcastq %xmm1, %xmm1
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,1,2,2]
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0,1],xmm1[2],xmm0[3]
; AVX2-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 1, i32 4, i32 2>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_0412(<4 x i32> %a, <4 x i32> %b) {
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE2-LABEL: shuffle_v4i32_0412:
; SSE2: # BB#0:
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[0,0]
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[1,2]
; SSE2-NEXT: movaps %xmm1, %xmm0
; SSE2-NEXT: retq
;
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE3-LABEL: shuffle_v4i32_0412:
; SSE3: # BB#0:
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[0,0]
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[1,2]
; SSE3-NEXT: movaps %xmm1, %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_0412:
; SSSE3: # BB#0:
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[0,0]
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[1,2]
; SSSE3-NEXT: movaps %xmm1, %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_0412:
; SSE41: # BB#0:
; SSE41-NEXT: pshufd {{.*#+}} xmm1 = xmm1[0,0,1,1]
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,1,2]
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3],xmm0[4,5,6,7]
; SSE41-NEXT: retq
;
; AVX1-LABEL: shuffle_v4i32_0412:
; AVX1: # BB#0:
; AVX1-NEXT: vpshufd {{.*#+}} xmm1 = xmm1[0,0,1,1]
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,1,1,2]
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3],xmm0[4,5,6,7]
; AVX1-NEXT: retq
;
; AVX2-LABEL: shuffle_v4i32_0412:
; AVX2: # BB#0:
; AVX2-NEXT: vpbroadcastd %xmm1, %xmm1
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,1,1,2]
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm1[1],xmm0[2,3]
; AVX2-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 4, i32 1, i32 2>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_4012(<4 x i32> %a, <4 x i32> %b) {
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE2-LABEL: shuffle_v4i32_4012:
; SSE2: # BB#0:
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[0,0]
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2],xmm0[1,2]
; SSE2-NEXT: movaps %xmm1, %xmm0
; SSE2-NEXT: retq
;
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE3-LABEL: shuffle_v4i32_4012:
; SSE3: # BB#0:
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[0,0]
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2],xmm0[1,2]
; SSE3-NEXT: movaps %xmm1, %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_4012:
; SSSE3: # BB#0:
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[0,0]
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2],xmm0[1,2]
; SSSE3-NEXT: movaps %xmm1, %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_4012:
; SSE41: # BB#0:
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,0,1,2]
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3,4,5,6,7]
; SSE41-NEXT: retq
;
; AVX1-LABEL: shuffle_v4i32_4012:
; AVX1: # BB#0:
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,0,1,2]
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3,4,5,6,7]
; AVX1-NEXT: retq
;
; AVX2-LABEL: shuffle_v4i32_4012:
; AVX2: # BB#0:
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,0,1,2]
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm1[0],xmm0[1,2,3]
; AVX2-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 4, i32 0, i32 1, i32 2>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_0145(<4 x i32> %a, <4 x i32> %b) {
; SSE-LABEL: shuffle_v4i32_0145:
; SSE: # BB#0:
; SSE-NEXT: punpcklqdq {{.*#+}} xmm0 = xmm0[0],xmm1[0]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_0145:
; AVX: # BB#0:
; AVX-NEXT: vpunpcklqdq {{.*#+}} xmm0 = xmm0[0],xmm1[0]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 1, i32 4, i32 5>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_0451(<4 x i32> %a, <4 x i32> %b) {
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE2-LABEL: shuffle_v4i32_0451:
; SSE2: # BB#0:
; SSE2-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
; SSE2-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,3,2]
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE2-NEXT: retq
;
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE3-LABEL: shuffle_v4i32_0451:
; SSE3: # BB#0:
; SSE3-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
; SSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,3,2]
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_0451:
; SSSE3: # BB#0:
; SSSE3-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
; SSSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,3,2]
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_0451:
; SSE41: # BB#0:
; SSE41-NEXT: pshufd {{.*#+}} xmm1 = xmm1[0,0,1,1]
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,0,1]
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3,4,5],xmm0[6,7]
; SSE41-NEXT: retq
;
; AVX1-LABEL: shuffle_v4i32_0451:
; AVX1: # BB#0:
; AVX1-NEXT: vpshufd {{.*#+}} xmm1 = xmm1[0,0,1,1]
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,1,0,1]
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3,4,5],xmm0[6,7]
; AVX1-NEXT: retq
;
; AVX2-LABEL: shuffle_v4i32_0451:
; AVX2: # BB#0:
; AVX2-NEXT: vpshufd {{.*#+}} xmm1 = xmm1[0,0,1,1]
; AVX2-NEXT: vpbroadcastq %xmm0, %xmm0
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm1[1,2],xmm0[3]
; AVX2-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 4, i32 5, i32 1>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_4501(<4 x i32> %a, <4 x i32> %b) {
; SSE-LABEL: shuffle_v4i32_4501:
; SSE: # BB#0:
; SSE-NEXT: punpcklqdq {{.*#+}} xmm1 = xmm1[0],xmm0[0]
; SSE-NEXT: movdqa %xmm1, %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_4501:
; AVX: # BB#0:
; AVX-NEXT: vpunpcklqdq {{.*#+}} xmm0 = xmm1[0],xmm0[0]
; AVX-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 4, i32 5, i32 0, i32 1>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_4015(<4 x i32> %a, <4 x i32> %b) {
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE2-LABEL: shuffle_v4i32_4015:
; SSE2: # BB#0:
; SSE2-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
; SSE2-NEXT: pshufd {{.*#+}} xmm0 = xmm0[1,0,2,3]
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE2-NEXT: retq
;
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE3-LABEL: shuffle_v4i32_4015:
; SSE3: # BB#0:
; SSE3-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
; SSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm0[1,0,2,3]
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_4015:
; SSSE3: # BB#0:
; SSSE3-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
; SSSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm0[1,0,2,3]
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_4015:
; SSE41: # BB#0:
; SSE41-NEXT: pshufd {{.*#+}} xmm1 = xmm1[0,1,0,1]
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,0,1,1]
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3,4,5],xmm1[6,7]
; SSE41-NEXT: retq
;
; AVX1-LABEL: shuffle_v4i32_4015:
; AVX1: # BB#0:
; AVX1-NEXT: vpshufd {{.*#+}} xmm1 = xmm1[0,1,0,1]
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,0,1,1]
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3,4,5],xmm1[6,7]
; AVX1-NEXT: retq
;
; AVX2-LABEL: shuffle_v4i32_4015:
; AVX2: # BB#0:
; AVX2-NEXT: vpbroadcastq %xmm1, %xmm1
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,0,1,1]
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm1[0],xmm0[1,2],xmm1[3]
; AVX2-NEXT: retq
[x86] Begin a significant overhaul of how vector lowering is done in the x86 backend. This sketches out a new code path for vector lowering, hidden behind an off-by-default flag while it is under development. The fundamental idea behind the new code path is to aggressively break down the problem space in ways that ease selecting the odd set of instructions available on x86, and carefully avoid scalarizing code even when forced to use older ISAs. Notably, this starts off restricting itself to SSE2 and implements the complete vector shuffle and blend space for 128-bit vectors in SSE2 without scalarizing. The plan is to layer on top of this ISA extensions where we can bail out of the complex SSE2 lowering and opt for a cheaper, specialized instruction (or set of instructions). It also needs to be generalized to AVX and AVX512 vector widths. Currently, this does a decent but not perfect job for SSE2. There are some specific shortcomings that I plan to address: - We need a peephole combine to fold together shuffles where possible. There are cases where a previous shuffle could be modified slightly to arrange for elements to be in the correct position and a later shuffle eliminated. Doing this eagerly added quite a bit of complexity, and so my plan is to combine away these redundancies afterward. - There are a lot more clever ways to use unpck and pack that need to be added. This is essential for real world shuffles as it turns out... Once SSE2 is polished a bit I should be able to get interesting numbers on performance improvements on benchmarks conducive to vectorization. All of this will be off by default until it is functionally equivalent of course. Differential Revision: http://reviews.llvm.org/D4225 llvm-svn: 211888
2014-06-27 19:23:44 +08:00
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 4, i32 0, i32 1, i32 5>
ret <4 x i32> %shuffle
}
define <4 x float> @shuffle_v4f32_4zzz(<4 x float> %a) {
; SSE2-LABEL: shuffle_v4f32_4zzz:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSE2-NEXT: movaps %xmm1, %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4f32_4zzz:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSE3-NEXT: movaps %xmm1, %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4f32_4zzz:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSSE3-NEXT: movaps %xmm1, %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4f32_4zzz:
; SSE41: # BB#0:
; SSE41-NEXT: xorps %xmm1, %xmm1
; SSE41-NEXT: blendps {{.*#+}} xmm0 = xmm0[0],xmm1[1,2,3]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_4zzz:
; AVX: # BB#0:
; AVX-NEXT: vxorps %xmm1, %xmm1, %xmm1
; AVX-NEXT: vblendps {{.*#+}} xmm0 = xmm0[0],xmm1[1,2,3]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> zeroinitializer, <4 x float> %a, <4 x i32> <i32 4, i32 1, i32 2, i32 3>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_z4zz(<4 x float> %a) {
; SSE2-LABEL: shuffle_v4f32_z4zz:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,0],xmm1[0,0]
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4f32_z4zz:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,0],xmm1[0,0]
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4f32_z4zz:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,0],xmm1[0,0]
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4f32_z4zz:
; SSE41: # BB#0:
; SSE41-NEXT: insertps {{.*#+}} xmm0 = zero,xmm0[0],zero,zero
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_z4zz:
; AVX: # BB#0:
; AVX-NEXT: vinsertps {{.*#+}} xmm0 = zero,xmm0[0],zero,zero
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> zeroinitializer, <4 x float> %a, <4 x i32> <i32 2, i32 4, i32 3, i32 0>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_zz4z(<4 x float> %a) {
; SSE2-LABEL: shuffle_v4f32_zz4z:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,0],xmm1[3,0]
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,1],xmm0[0,2]
; SSE2-NEXT: movaps %xmm1, %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4f32_zz4z:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,0],xmm1[3,0]
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,1],xmm0[0,2]
; SSE3-NEXT: movaps %xmm1, %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4f32_zz4z:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,0],xmm1[3,0]
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,1],xmm0[0,2]
; SSSE3-NEXT: movaps %xmm1, %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4f32_zz4z:
; SSE41: # BB#0:
; SSE41-NEXT: insertps {{.*#+}} xmm0 = zero,zero,xmm0[0],zero
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_zz4z:
; AVX: # BB#0:
; AVX-NEXT: vinsertps {{.*#+}} xmm0 = zero,zero,xmm0[0],zero
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> zeroinitializer, <4 x float> %a, <4 x i32> <i32 0, i32 0, i32 4, i32 0>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_zuu4(<4 x float> %a) {
; SSE2-LABEL: shuffle_v4f32_zuu4:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,1],xmm0[2,0]
; SSE2-NEXT: movaps %xmm1, %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4f32_zuu4:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,1],xmm0[2,0]
; SSE3-NEXT: movaps %xmm1, %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4f32_zuu4:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,1],xmm0[2,0]
; SSSE3-NEXT: movaps %xmm1, %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4f32_zuu4:
; SSE41: # BB#0:
; SSE41-NEXT: insertps {{.*#+}} xmm0 = zero,zero,zero,xmm0[0]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_zuu4:
; AVX: # BB#0:
; AVX-NEXT: vinsertps {{.*#+}} xmm0 = zero,zero,zero,xmm0[0]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> zeroinitializer, <4 x float> %a, <4 x i32> <i32 0, i32 undef, i32 undef, i32 4>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_zzz7(<4 x float> %a) {
; SSE2-LABEL: shuffle_v4f32_zzz7:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[3,0],xmm1[2,0]
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,1],xmm0[2,0]
; SSE2-NEXT: movaps %xmm1, %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4f32_zzz7:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[3,0],xmm1[2,0]
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,1],xmm0[2,0]
; SSE3-NEXT: movaps %xmm1, %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4f32_zzz7:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[3,0],xmm1[2,0]
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,1],xmm0[2,0]
; SSSE3-NEXT: movaps %xmm1, %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4f32_zzz7:
; SSE41: # BB#0:
; SSE41-NEXT: xorps %xmm1, %xmm1
; SSE41-NEXT: blendps {{.*#+}} xmm0 = xmm1[0,1,2],xmm0[3]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_zzz7:
; AVX: # BB#0:
; AVX-NEXT: vxorps %xmm1, %xmm1, %xmm1
; AVX-NEXT: vblendps {{.*#+}} xmm0 = xmm1[0,1,2],xmm0[3]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> zeroinitializer, <4 x float> %a, <4 x i32> <i32 0, i32 1, i32 2, i32 7>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_z6zz(<4 x float> %a) {
; SSE2-LABEL: shuffle_v4f32_z6zz:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[0,0]
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4f32_z6zz:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[0,0]
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4f32_z6zz:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[0,0]
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4f32_z6zz:
; SSE41: # BB#0:
; SSE41-NEXT: insertps {{.*#+}} xmm0 = zero,xmm0[2],zero,zero
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_z6zz:
; AVX: # BB#0:
; AVX-NEXT: vinsertps {{.*#+}} xmm0 = zero,xmm0[2],zero,zero
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> zeroinitializer, <4 x float> %a, <4 x i32> <i32 0, i32 6, i32 2, i32 3>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_0z23(<4 x float> %a) {
; SSE2-LABEL: shuffle_v4f32_0z23:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[1,0],xmm0[0,0]
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[2,3]
; SSE2-NEXT: movaps %xmm1, %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4f32_0z23:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[1,0],xmm0[0,0]
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[2,3]
; SSE3-NEXT: movaps %xmm1, %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4f32_0z23:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[1,0],xmm0[0,0]
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[2,3]
; SSSE3-NEXT: movaps %xmm1, %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4f32_0z23:
; SSE41: # BB#0:
; SSE41-NEXT: xorps %xmm1, %xmm1
; SSE41-NEXT: blendps {{.*#+}} xmm0 = xmm0[0],xmm1[1],xmm0[2,3]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_0z23:
; AVX: # BB#0:
; AVX-NEXT: vxorps %xmm1, %xmm1, %xmm1
; AVX-NEXT: vblendps {{.*#+}} xmm0 = xmm0[0],xmm1[1],xmm0[2,3]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> %a, <4 x float> zeroinitializer, <4 x i32> <i32 0, i32 4, i32 2, i32 3>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_01z3(<4 x float> %a) {
; SSE2-LABEL: shuffle_v4f32_01z3:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[3,0]
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[0,2]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4f32_01z3:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[3,0]
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[0,2]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4f32_01z3:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[3,0]
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[0,2]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4f32_01z3:
; SSE41: # BB#0:
; SSE41-NEXT: xorps %xmm1, %xmm1
; SSE41-NEXT: blendps {{.*#+}} xmm0 = xmm0[0,1],xmm1[2],xmm0[3]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_01z3:
; AVX: # BB#0:
; AVX-NEXT: vxorps %xmm1, %xmm1, %xmm1
; AVX-NEXT: vblendps {{.*#+}} xmm0 = xmm0[0,1],xmm1[2],xmm0[3]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> %a, <4 x float> zeroinitializer, <4 x i32> <i32 0, i32 1, i32 4, i32 3>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_012z(<4 x float> %a) {
; SSE2-LABEL: shuffle_v4f32_012z:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[3,0],xmm0[2,0]
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,0]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4f32_012z:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[3,0],xmm0[2,0]
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,0]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4f32_012z:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[3,0],xmm0[2,0]
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,0]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4f32_012z:
; SSE41: # BB#0:
; SSE41-NEXT: xorps %xmm1, %xmm1
; SSE41-NEXT: blendps {{.*#+}} xmm0 = xmm0[0,1,2],xmm1[3]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_012z:
; AVX: # BB#0:
; AVX-NEXT: vxorps %xmm1, %xmm1, %xmm1
; AVX-NEXT: vblendps {{.*#+}} xmm0 = xmm0[0,1,2],xmm1[3]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> %a, <4 x float> zeroinitializer, <4 x i32> <i32 0, i32 1, i32 2, i32 7>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_0zz3(<4 x float> %a) {
; SSE2-LABEL: shuffle_v4f32_0zz3:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,3],xmm1[1,2]
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,2,3,1]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4f32_0zz3:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,3],xmm1[1,2]
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,2,3,1]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4f32_0zz3:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,3],xmm1[1,2]
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,2,3,1]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4f32_0zz3:
; SSE41: # BB#0:
; SSE41-NEXT: xorps %xmm1, %xmm1
; SSE41-NEXT: blendps {{.*#+}} xmm0 = xmm0[0],xmm1[1,2],xmm0[3]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_0zz3:
; AVX: # BB#0:
; AVX-NEXT: vxorps %xmm1, %xmm1, %xmm1
; AVX-NEXT: vblendps {{.*#+}} xmm0 = xmm0[0],xmm1[1,2],xmm0[3]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> %a, <4 x float> zeroinitializer, <4 x i32> <i32 0, i32 4, i32 4, i32 3>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_v4f32_u051(<4 x float> %a, <4 x float> %b) {
; SSE-LABEL: shuffle_v4f32_u051:
; SSE: # BB#0:
; SSE-NEXT: unpcklps {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1]
; SSE-NEXT: movaps %xmm1, %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4f32_u051:
; AVX: # BB#0:
; AVX-NEXT: vunpcklps {{.*#+}} xmm0 = xmm1[0],xmm0[0],xmm1[1],xmm0[1]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 undef, i32 0, i32 5, i32 1>
ret <4 x float> %shuffle
}
define <4 x i32> @shuffle_v4i32_4zzz(<4 x i32> %a) {
; SSE2-LABEL: shuffle_v4i32_4zzz:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSE2-NEXT: movaps %xmm1, %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_4zzz:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSE3-NEXT: movaps %xmm1, %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_4zzz:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSSE3-NEXT: movaps %xmm1, %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_4zzz:
; SSE41: # BB#0:
; SSE41-NEXT: pxor %xmm1, %xmm1
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3,4,5,6,7]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_4zzz:
; AVX: # BB#0:
; AVX-NEXT: vpxor %xmm1, %xmm1, %xmm1
; AVX-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3,4,5,6,7]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> zeroinitializer, <4 x i32> %a, <4 x i32> <i32 4, i32 1, i32 2, i32 3>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_z4zz(<4 x i32> %a) {
; SSE2-LABEL: shuffle_v4i32_z4zz:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSE2-NEXT: pshufd {{.*#+}} xmm0 = xmm1[1,0,1,1]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_z4zz:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm1[1,0,1,1]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_z4zz:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm1[1,0,1,1]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_z4zz:
; SSE41: # BB#0:
; SSE41-NEXT: pxor %xmm1, %xmm1
; SSE41-NEXT: pblendw {{.*#+}} xmm1 = xmm0[0,1],xmm1[2,3,4,5,6,7]
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm1[1,0,1,1]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_z4zz:
; AVX: # BB#0:
; AVX-NEXT: vpxor %xmm1, %xmm1, %xmm1
; AVX-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3,4,5,6,7]
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[1,0,1,1]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> zeroinitializer, <4 x i32> %a, <4 x i32> <i32 2, i32 4, i32 3, i32 0>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_zz4z(<4 x i32> %a) {
; SSE2-LABEL: shuffle_v4i32_zz4z:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSE2-NEXT: pshufd {{.*#+}} xmm0 = xmm1[1,1,0,1]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_zz4z:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm1[1,1,0,1]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_zz4z:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm1[1,1,0,1]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_zz4z:
; SSE41: # BB#0:
; SSE41-NEXT: pxor %xmm1, %xmm1
; SSE41-NEXT: pblendw {{.*#+}} xmm1 = xmm0[0,1],xmm1[2,3,4,5,6,7]
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm1[1,1,0,1]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_zz4z:
; AVX: # BB#0:
; AVX-NEXT: vpxor %xmm1, %xmm1, %xmm1
; AVX-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3,4,5,6,7]
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[1,1,0,1]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> zeroinitializer, <4 x i32> %a, <4 x i32> <i32 0, i32 0, i32 4, i32 0>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_zuu4(<4 x i32> %a) {
; SSE-LABEL: shuffle_v4i32_zuu4:
; SSE: # BB#0:
; SSE-NEXT: pslldq {{.*#+}} xmm0 = zero,zero,zero,zero,zero,zero,zero,zero,zero,zero,zero,zero,xmm0[0,1,2,3]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_zuu4:
; AVX: # BB#0:
; AVX-NEXT: vpslldq {{.*#+}} xmm0 = zero,zero,zero,zero,zero,zero,zero,zero,zero,zero,zero,zero,xmm0[0,1,2,3]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> zeroinitializer, <4 x i32> %a, <4 x i32> <i32 0, i32 undef, i32 undef, i32 4>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_z6zz(<4 x i32> %a) {
; SSE2-LABEL: shuffle_v4i32_z6zz:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[0,0]
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_z6zz:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[0,0]
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_z6zz:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[0,0]
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_z6zz:
; SSE41: # BB#0:
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; SSE41-NEXT: pshufd {{.*#+}} xmm1 = xmm0[2,2,3,3]
; SSE41-NEXT: pxor %xmm0, %xmm0
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3],xmm0[4,5,6,7]
; SSE41-NEXT: retq
;
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
; AVX1-LABEL: shuffle_v4i32_z6zz:
; AVX1: # BB#0:
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[2,2,3,3]
; AVX1-NEXT: vpxor %xmm1, %xmm1, %xmm1
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3],xmm1[4,5,6,7]
; AVX1-NEXT: retq
;
; AVX2-LABEL: shuffle_v4i32_z6zz:
; AVX2: # BB#0:
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[2,2,3,3]
; AVX2-NEXT: vpxor %xmm1, %xmm1, %xmm1
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm1[0],xmm0[1],xmm1[2,3]
; AVX2-NEXT: retq
%shuffle = shufflevector <4 x i32> zeroinitializer, <4 x i32> %a, <4 x i32> <i32 0, i32 6, i32 2, i32 3>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_7012(<4 x i32> %a, <4 x i32> %b) {
; SSE2-LABEL: shuffle_v4i32_7012:
; SSE2: # BB#0:
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[3,0],xmm0[0,0]
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2],xmm0[1,2]
; SSE2-NEXT: movaps %xmm1, %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_7012:
; SSE3: # BB#0:
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[3,0],xmm0[0,0]
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2],xmm0[1,2]
; SSE3-NEXT: movaps %xmm1, %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_7012:
; SSSE3: # BB#0:
; SSSE3-NEXT: palignr {{.*#+}} xmm0 = xmm1[12,13,14,15],xmm0[0,1,2,3,4,5,6,7,8,9,10,11]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_7012:
; SSE41: # BB#0:
; SSE41-NEXT: palignr {{.*#+}} xmm0 = xmm1[12,13,14,15],xmm0[0,1,2,3,4,5,6,7,8,9,10,11]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_7012:
; AVX: # BB#0:
; AVX-NEXT: vpalignr {{.*#+}} xmm0 = xmm1[12,13,14,15],xmm0[0,1,2,3,4,5,6,7,8,9,10,11]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 7, i32 0, i32 1, i32 2>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_6701(<4 x i32> %a, <4 x i32> %b) {
; SSE2-LABEL: shuffle_v4i32_6701:
; SSE2: # BB#0:
; SSE2-NEXT: shufpd {{.*#+}} xmm1 = xmm1[1],xmm0[0]
; SSE2-NEXT: movapd %xmm1, %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_6701:
; SSE3: # BB#0:
; SSE3-NEXT: shufpd {{.*#+}} xmm1 = xmm1[1],xmm0[0]
; SSE3-NEXT: movapd %xmm1, %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_6701:
; SSSE3: # BB#0:
; SSSE3-NEXT: palignr {{.*#+}} xmm0 = xmm1[8,9,10,11,12,13,14,15],xmm0[0,1,2,3,4,5,6,7]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_6701:
; SSE41: # BB#0:
; SSE41-NEXT: palignr {{.*#+}} xmm0 = xmm1[8,9,10,11,12,13,14,15],xmm0[0,1,2,3,4,5,6,7]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_6701:
; AVX: # BB#0:
; AVX-NEXT: vpalignr {{.*#+}} xmm0 = xmm1[8,9,10,11,12,13,14,15],xmm0[0,1,2,3,4,5,6,7]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 6, i32 7, i32 0, i32 1>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_5670(<4 x i32> %a, <4 x i32> %b) {
; SSE2-LABEL: shuffle_v4i32_5670:
; SSE2: # BB#0:
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,0],xmm1[3,0]
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[1,2],xmm0[2,0]
; SSE2-NEXT: movaps %xmm1, %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_5670:
; SSE3: # BB#0:
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,0],xmm1[3,0]
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[1,2],xmm0[2,0]
; SSE3-NEXT: movaps %xmm1, %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_5670:
; SSSE3: # BB#0:
; SSSE3-NEXT: palignr {{.*#+}} xmm0 = xmm1[4,5,6,7,8,9,10,11,12,13,14,15],xmm0[0,1,2,3]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_5670:
; SSE41: # BB#0:
; SSE41-NEXT: palignr {{.*#+}} xmm0 = xmm1[4,5,6,7,8,9,10,11,12,13,14,15],xmm0[0,1,2,3]
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_5670:
; AVX: # BB#0:
; AVX-NEXT: vpalignr {{.*#+}} xmm0 = xmm1[4,5,6,7,8,9,10,11,12,13,14,15],xmm0[0,1,2,3]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 5, i32 6, i32 7, i32 0>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_1234(<4 x i32> %a, <4 x i32> %b) {
; SSE2-LABEL: shuffle_v4i32_1234:
; SSE2: # BB#0:
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[3,0]
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,2],xmm1[2,0]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_1234:
; SSE3: # BB#0:
; SSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[3,0]
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,2],xmm1[2,0]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_1234:
; SSSE3: # BB#0:
; SSSE3-NEXT: palignr {{.*#+}} xmm1 = xmm0[4,5,6,7,8,9,10,11,12,13,14,15],xmm1[0,1,2,3]
; SSSE3-NEXT: movdqa %xmm1, %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_1234:
; SSE41: # BB#0:
; SSE41-NEXT: palignr {{.*#+}} xmm1 = xmm0[4,5,6,7,8,9,10,11,12,13,14,15],xmm1[0,1,2,3]
; SSE41-NEXT: movdqa %xmm1, %xmm0
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_1234:
; AVX: # BB#0:
; AVX-NEXT: vpalignr {{.*#+}} xmm0 = xmm0[4,5,6,7,8,9,10,11,12,13,14,15],xmm1[0,1,2,3]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 1, i32 2, i32 3, i32 4>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_2345(<4 x i32> %a, <4 x i32> %b) {
; SSE2-LABEL: shuffle_v4i32_2345:
; SSE2: # BB#0:
; SSE2-NEXT: shufpd {{.*#+}} xmm0 = xmm0[1],xmm1[0]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_2345:
; SSE3: # BB#0:
; SSE3-NEXT: shufpd {{.*#+}} xmm0 = xmm0[1],xmm1[0]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_2345:
; SSSE3: # BB#0:
; SSSE3-NEXT: palignr {{.*#+}} xmm1 = xmm0[8,9,10,11,12,13,14,15],xmm1[0,1,2,3,4,5,6,7]
; SSSE3-NEXT: movdqa %xmm1, %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_2345:
; SSE41: # BB#0:
; SSE41-NEXT: palignr {{.*#+}} xmm1 = xmm0[8,9,10,11,12,13,14,15],xmm1[0,1,2,3,4,5,6,7]
; SSE41-NEXT: movdqa %xmm1, %xmm0
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_2345:
; AVX: # BB#0:
; AVX-NEXT: vpalignr {{.*#+}} xmm0 = xmm0[8,9,10,11,12,13,14,15],xmm1[0,1,2,3,4,5,6,7]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 2, i32 3, i32 4, i32 5>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_40u1(<4 x i32> %a, <4 x i32> %b) {
; SSE-LABEL: shuffle_v4i32_40u1:
; SSE: # BB#0:
; SSE-NEXT: punpckldq {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1]
; SSE-NEXT: movdqa %xmm1, %xmm0
; SSE-NEXT: retq
[x86] Teach the 128-bit vector shuffle lowering routines to take advantage of the existence of a reasonable blend instruction. The 256-bit vector shuffle lowering has leveraged the general technique of decomposed shuffles and blends for quite some time, but this never made it back into the 128-bit code, and there are a large number of patterns where this is substantially better. For example, this removes almost all domain crossing in vector shuffles that involve some blend and some permutation with SSE4.1 and later. See the massive reduction in 'shufps' for integer test cases in this commit. This isn't perfect yet for a few reasons: 1) The v8i16 shuffle lowering continues to plague me. We don't always form an unpack-based blend when that would be better. But the wins pretty drastically outstrip the losses here. 2) The v16i8 shuffle lowering is just a disaster here. I never went and implemented blend support here for some terrible reason. I'll do that next probably. I've not updated it for now. More variations on this technique are coming as well -- we don't shuffle-into-unpack or shuffle-into-palignr, both of which would also be profitable. Note that some test cases grow significantly in the number of instructions, but I expect to actually be faster. We use pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are very likely to pipeline well (two ports on most modern intel chips) and the blend is a *very* fast instruction. The domain switch penalty will essentially always be more than a blend instruction, which is the only increase in tree height. llvm-svn: 229350
2015-02-16 09:52:02 +08:00
;
; AVX-LABEL: shuffle_v4i32_40u1:
; AVX: # BB#0:
; AVX-NEXT: vpunpckldq {{.*#+}} xmm0 = xmm1[0],xmm0[0],xmm1[1],xmm0[1]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 4, i32 0, i32 undef, i32 1>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_3456(<4 x i32> %a, <4 x i32> %b) {
; SSE2-LABEL: shuffle_v4i32_3456:
; SSE2: # BB#0:
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[3,0],xmm1[0,0]
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,2],xmm1[1,2]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_3456:
; SSE3: # BB#0:
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[3,0],xmm1[0,0]
; SSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,2],xmm1[1,2]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_3456:
; SSSE3: # BB#0:
; SSSE3-NEXT: palignr {{.*#+}} xmm1 = xmm0[12,13,14,15],xmm1[0,1,2,3,4,5,6,7,8,9,10,11]
; SSSE3-NEXT: movdqa %xmm1, %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_3456:
; SSE41: # BB#0:
; SSE41-NEXT: palignr {{.*#+}} xmm1 = xmm0[12,13,14,15],xmm1[0,1,2,3,4,5,6,7,8,9,10,11]
; SSE41-NEXT: movdqa %xmm1, %xmm0
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_3456:
; AVX: # BB#0:
; AVX-NEXT: vpalignr {{.*#+}} xmm0 = xmm0[12,13,14,15],xmm1[0,1,2,3,4,5,6,7,8,9,10,11]
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 3, i32 4, i32 5, i32 6>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_0u1u(<4 x i32> %a, <4 x i32> %b) {
; SSE2-LABEL: shuffle_v4i32_0u1u:
; SSE2: # BB#0:
; SSE2-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,1,3]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_0u1u:
; SSE3: # BB#0:
; SSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,1,3]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_0u1u:
; SSSE3: # BB#0:
; SSSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,1,3]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_0u1u:
; SSE41: # BB#0:
; SSE41-NEXT: pmovzxdq {{.*#+}} xmm0 = xmm0[0],zero,xmm0[1],zero
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_0u1u:
; AVX: # BB#0:
; AVX-NEXT: vpmovzxdq {{.*#+}} xmm0 = xmm0[0],zero,xmm0[1],zero
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 undef, i32 1, i32 undef>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_0z1z(<4 x i32> %a) {
; SSE2-LABEL: shuffle_v4i32_0z1z:
; SSE2: # BB#0:
; SSE2-NEXT: pxor %xmm1, %xmm1
; SSE2-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_0z1z:
; SSE3: # BB#0:
; SSE3-NEXT: pxor %xmm1, %xmm1
; SSE3-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_0z1z:
; SSSE3: # BB#0:
; SSSE3-NEXT: pxor %xmm1, %xmm1
; SSSE3-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_0z1z:
; SSE41: # BB#0:
; SSE41-NEXT: pmovzxdq {{.*#+}} xmm0 = xmm0[0],zero,xmm0[1],zero
; SSE41-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_0z1z:
; AVX: # BB#0:
; AVX-NEXT: vpmovzxdq {{.*#+}} xmm0 = xmm0[0],zero,xmm0[1],zero
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> zeroinitializer, <4 x i32> <i32 0, i32 5, i32 1, i32 7>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_01zu(<4 x i32> %a) {
; SSE-LABEL: shuffle_v4i32_01zu:
; SSE: # BB#0:
; SSE-NEXT: movq {{.*#+}} xmm0 = xmm0[0],zero
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_01zu:
; AVX: # BB#0:
; AVX-NEXT: vmovq {{.*#+}} xmm0 = xmm0[0],zero
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> zeroinitializer, <4 x i32> <i32 0, i32 1, i32 7, i32 undef>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_0z23(<4 x i32> %a) {
; SSE2-LABEL: shuffle_v4i32_0z23:
; SSE2: # BB#0:
; SSE2-NEXT: andps {{.*}}(%rip), %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_0z23:
; SSE3: # BB#0:
; SSE3-NEXT: andps {{.*}}(%rip), %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_0z23:
; SSSE3: # BB#0:
; SSSE3-NEXT: andps {{.*}}(%rip), %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_0z23:
; SSE41: # BB#0:
; SSE41-NEXT: pxor %xmm1, %xmm1
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3],xmm0[4,5,6,7]
; SSE41-NEXT: retq
;
; AVX1-LABEL: shuffle_v4i32_0z23:
; AVX1: # BB#0:
; AVX1-NEXT: vpxor %xmm1, %xmm1, %xmm1
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3],xmm0[4,5,6,7]
; AVX1-NEXT: retq
;
; AVX2-LABEL: shuffle_v4i32_0z23:
; AVX2: # BB#0:
; AVX2-NEXT: vpxor %xmm1, %xmm1, %xmm1
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm1[1],xmm0[2,3]
; AVX2-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> zeroinitializer, <4 x i32> <i32 0, i32 4, i32 2, i32 3>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_01z3(<4 x i32> %a) {
; SSE2-LABEL: shuffle_v4i32_01z3:
; SSE2: # BB#0:
; SSE2-NEXT: andps {{.*}}(%rip), %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_01z3:
; SSE3: # BB#0:
; SSE3-NEXT: andps {{.*}}(%rip), %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_01z3:
; SSSE3: # BB#0:
; SSSE3-NEXT: andps {{.*}}(%rip), %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_01z3:
; SSE41: # BB#0:
; SSE41-NEXT: pxor %xmm1, %xmm1
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1,2,3],xmm1[4,5],xmm0[6,7]
; SSE41-NEXT: retq
;
; AVX1-LABEL: shuffle_v4i32_01z3:
; AVX1: # BB#0:
; AVX1-NEXT: vpxor %xmm1, %xmm1, %xmm1
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1,2,3],xmm1[4,5],xmm0[6,7]
; AVX1-NEXT: retq
;
; AVX2-LABEL: shuffle_v4i32_01z3:
; AVX2: # BB#0:
; AVX2-NEXT: vpxor %xmm1, %xmm1, %xmm1
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0,1],xmm1[2],xmm0[3]
; AVX2-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> zeroinitializer, <4 x i32> <i32 0, i32 1, i32 4, i32 3>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_012z(<4 x i32> %a) {
; SSE2-LABEL: shuffle_v4i32_012z:
; SSE2: # BB#0:
; SSE2-NEXT: andps {{.*}}(%rip), %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_012z:
; SSE3: # BB#0:
; SSE3-NEXT: andps {{.*}}(%rip), %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_012z:
; SSSE3: # BB#0:
; SSSE3-NEXT: andps {{.*}}(%rip), %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_012z:
; SSE41: # BB#0:
; SSE41-NEXT: pxor %xmm1, %xmm1
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1,2,3,4,5],xmm1[6,7]
; SSE41-NEXT: retq
;
; AVX1-LABEL: shuffle_v4i32_012z:
; AVX1: # BB#0:
; AVX1-NEXT: vpxor %xmm1, %xmm1, %xmm1
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1,2,3,4,5],xmm1[6,7]
; AVX1-NEXT: retq
;
; AVX2-LABEL: shuffle_v4i32_012z:
; AVX2: # BB#0:
; AVX2-NEXT: vpxor %xmm1, %xmm1, %xmm1
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0,1,2],xmm1[3]
; AVX2-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> zeroinitializer, <4 x i32> <i32 0, i32 1, i32 2, i32 7>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_0zz3(<4 x i32> %a) {
; SSE2-LABEL: shuffle_v4i32_0zz3:
; SSE2: # BB#0:
; SSE2-NEXT: andps {{.*}}(%rip), %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: shuffle_v4i32_0zz3:
; SSE3: # BB#0:
; SSE3-NEXT: andps {{.*}}(%rip), %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: shuffle_v4i32_0zz3:
; SSSE3: # BB#0:
; SSSE3-NEXT: andps {{.*}}(%rip), %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: shuffle_v4i32_0zz3:
; SSE41: # BB#0:
; SSE41-NEXT: pxor %xmm1, %xmm1
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3,4,5],xmm0[6,7]
; SSE41-NEXT: retq
;
; AVX1-LABEL: shuffle_v4i32_0zz3:
; AVX1: # BB#0:
; AVX1-NEXT: vpxor %xmm1, %xmm1, %xmm1
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3,4,5],xmm0[6,7]
; AVX1-NEXT: retq
;
; AVX2-LABEL: shuffle_v4i32_0zz3:
; AVX2: # BB#0:
; AVX2-NEXT: vpxor %xmm1, %xmm1, %xmm1
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm1[1,2],xmm0[3]
; AVX2-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> zeroinitializer, <4 x i32> <i32 0, i32 4, i32 4, i32 3>
ret <4 x i32> %shuffle
}
define <4 x i32> @insert_reg_and_zero_v4i32(i32 %a) {
; SSE-LABEL: insert_reg_and_zero_v4i32:
; SSE: # BB#0:
; SSE-NEXT: movd %edi, %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: insert_reg_and_zero_v4i32:
; AVX: # BB#0:
; AVX-NEXT: vmovd %edi, %xmm0
; AVX-NEXT: retq
%v = insertelement <4 x i32> undef, i32 %a, i32 0
%shuffle = shufflevector <4 x i32> %v, <4 x i32> zeroinitializer, <4 x i32> <i32 0, i32 5, i32 6, i32 7>
ret <4 x i32> %shuffle
}
define <4 x i32> @insert_mem_and_zero_v4i32(i32* %ptr) {
; SSE-LABEL: insert_mem_and_zero_v4i32:
; SSE: # BB#0:
; SSE-NEXT: movd {{.*#+}} xmm0 = mem[0],zero,zero,zero
; SSE-NEXT: retq
;
; AVX-LABEL: insert_mem_and_zero_v4i32:
; AVX: # BB#0:
; AVX-NEXT: vmovd {{.*#+}} xmm0 = mem[0],zero,zero,zero
; AVX-NEXT: retq
%a = load i32* %ptr
%v = insertelement <4 x i32> undef, i32 %a, i32 0
%shuffle = shufflevector <4 x i32> %v, <4 x i32> zeroinitializer, <4 x i32> <i32 0, i32 5, i32 6, i32 7>
ret <4 x i32> %shuffle
}
define <4 x float> @insert_reg_and_zero_v4f32(float %a) {
; SSE2-LABEL: insert_reg_and_zero_v4f32:
; SSE2: # BB#0:
; SSE2-NEXT: xorps %xmm1, %xmm1
; SSE2-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSE2-NEXT: movaps %xmm1, %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: insert_reg_and_zero_v4f32:
; SSE3: # BB#0:
; SSE3-NEXT: xorps %xmm1, %xmm1
; SSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSE3-NEXT: movaps %xmm1, %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: insert_reg_and_zero_v4f32:
; SSSE3: # BB#0:
; SSSE3-NEXT: xorps %xmm1, %xmm1
; SSSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
; SSSE3-NEXT: movaps %xmm1, %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: insert_reg_and_zero_v4f32:
; SSE41: # BB#0:
; SSE41-NEXT: xorps %xmm1, %xmm1
; SSE41-NEXT: blendps {{.*#+}} xmm0 = xmm0[0],xmm1[1,2,3]
; SSE41-NEXT: retq
;
; AVX-LABEL: insert_reg_and_zero_v4f32:
; AVX: # BB#0:
; AVX-NEXT: vxorps %xmm1, %xmm1, %xmm1
; AVX-NEXT: vmovss {{.*#+}} xmm0 = xmm0[0],xmm1[1,2,3]
; AVX-NEXT: retq
%v = insertelement <4 x float> undef, float %a, i32 0
%shuffle = shufflevector <4 x float> %v, <4 x float> zeroinitializer, <4 x i32> <i32 0, i32 5, i32 6, i32 7>
ret <4 x float> %shuffle
}
define <4 x float> @insert_mem_and_zero_v4f32(float* %ptr) {
; SSE-LABEL: insert_mem_and_zero_v4f32:
; SSE: # BB#0:
; SSE-NEXT: movss {{.*#+}} xmm0 = mem[0],zero,zero,zero
; SSE-NEXT: retq
;
; AVX-LABEL: insert_mem_and_zero_v4f32:
; AVX: # BB#0:
; AVX-NEXT: vmovss {{.*#+}} xmm0 = mem[0],zero,zero,zero
; AVX-NEXT: retq
%a = load float* %ptr
%v = insertelement <4 x float> undef, float %a, i32 0
%shuffle = shufflevector <4 x float> %v, <4 x float> zeroinitializer, <4 x i32> <i32 0, i32 5, i32 6, i32 7>
ret <4 x float> %shuffle
}
define <4 x i32> @insert_reg_lo_v4i32(i64 %a, <4 x i32> %b) {
; SSE2-LABEL: insert_reg_lo_v4i32:
; SSE2: # BB#0:
; SSE2-NEXT: movd %rdi, %xmm1
; SSE2-NEXT: movsd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
; SSE2-NEXT: retq
;
; SSE3-LABEL: insert_reg_lo_v4i32:
; SSE3: # BB#0:
; SSE3-NEXT: movd %rdi, %xmm1
; SSE3-NEXT: movsd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
; SSE3-NEXT: retq
;
; SSSE3-LABEL: insert_reg_lo_v4i32:
; SSSE3: # BB#0:
; SSSE3-NEXT: movd %rdi, %xmm1
; SSSE3-NEXT: movsd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
; SSSE3-NEXT: retq
;
; SSE41-LABEL: insert_reg_lo_v4i32:
; SSE41: # BB#0:
; SSE41-NEXT: movd %rdi, %xmm1
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm1[0,1,2,3],xmm0[4,5,6,7]
; SSE41-NEXT: retq
;
; AVX1-LABEL: insert_reg_lo_v4i32:
; AVX1: # BB#0:
; AVX1-NEXT: vmovq %rdi, %xmm1
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm1[0,1,2,3],xmm0[4,5,6,7]
; AVX1-NEXT: retq
;
; AVX2-LABEL: insert_reg_lo_v4i32:
; AVX2: # BB#0:
; AVX2-NEXT: vmovq %rdi, %xmm1
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3]
; AVX2-NEXT: retq
%a.cast = bitcast i64 %a to <2 x i32>
%v = shufflevector <2 x i32> %a.cast, <2 x i32> undef, <4 x i32> <i32 0, i32 1, i32 undef, i32 undef>
%shuffle = shufflevector <4 x i32> %v, <4 x i32> %b, <4 x i32> <i32 0, i32 1, i32 6, i32 7>
ret <4 x i32> %shuffle
}
define <4 x i32> @insert_mem_lo_v4i32(<2 x i32>* %ptr, <4 x i32> %b) {
; SSE2-LABEL: insert_mem_lo_v4i32:
; SSE2: # BB#0:
; SSE2-NEXT: movlpd (%rdi), %xmm0
; SSE2-NEXT: retq
;
; SSE3-LABEL: insert_mem_lo_v4i32:
; SSE3: # BB#0:
; SSE3-NEXT: movlpd (%rdi), %xmm0
; SSE3-NEXT: retq
;
; SSSE3-LABEL: insert_mem_lo_v4i32:
; SSSE3: # BB#0:
; SSSE3-NEXT: movlpd (%rdi), %xmm0
; SSSE3-NEXT: retq
;
; SSE41-LABEL: insert_mem_lo_v4i32:
; SSE41: # BB#0:
; SSE41-NEXT: movq {{.*#+}} xmm1 = mem[0],zero
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm1[0,1,2,3],xmm0[4,5,6,7]
; SSE41-NEXT: retq
;
; AVX1-LABEL: insert_mem_lo_v4i32:
; AVX1: # BB#0:
; AVX1-NEXT: vmovq {{.*#+}} xmm1 = mem[0],zero
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm1[0,1,2,3],xmm0[4,5,6,7]
; AVX1-NEXT: retq
;
; AVX2-LABEL: insert_mem_lo_v4i32:
; AVX2: # BB#0:
; AVX2-NEXT: vmovq {{.*#+}} xmm1 = mem[0],zero
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3]
; AVX2-NEXT: retq
%a = load <2 x i32>* %ptr
%v = shufflevector <2 x i32> %a, <2 x i32> undef, <4 x i32> <i32 0, i32 1, i32 undef, i32 undef>
%shuffle = shufflevector <4 x i32> %v, <4 x i32> %b, <4 x i32> <i32 0, i32 1, i32 6, i32 7>
ret <4 x i32> %shuffle
}
define <4 x i32> @insert_reg_hi_v4i32(i64 %a, <4 x i32> %b) {
; SSE-LABEL: insert_reg_hi_v4i32:
; SSE: # BB#0:
; SSE-NEXT: movd %rdi, %xmm1
; SSE-NEXT: punpcklqdq {{.*#+}} xmm0 = xmm0[0],xmm1[0]
; SSE-NEXT: retq
;
; AVX-LABEL: insert_reg_hi_v4i32:
; AVX: # BB#0:
; AVX-NEXT: vmovq %rdi, %xmm1
; AVX-NEXT: vpunpcklqdq {{.*#+}} xmm0 = xmm0[0],xmm1[0]
; AVX-NEXT: retq
%a.cast = bitcast i64 %a to <2 x i32>
%v = shufflevector <2 x i32> %a.cast, <2 x i32> undef, <4 x i32> <i32 0, i32 1, i32 undef, i32 undef>
%shuffle = shufflevector <4 x i32> %v, <4 x i32> %b, <4 x i32> <i32 4, i32 5, i32 0, i32 1>
ret <4 x i32> %shuffle
}
define <4 x i32> @insert_mem_hi_v4i32(<2 x i32>* %ptr, <4 x i32> %b) {
; SSE-LABEL: insert_mem_hi_v4i32:
; SSE: # BB#0:
; SSE-NEXT: movq {{.*#+}} xmm1 = mem[0],zero
; SSE-NEXT: punpcklqdq {{.*#+}} xmm0 = xmm0[0],xmm1[0]
; SSE-NEXT: retq
;
; AVX-LABEL: insert_mem_hi_v4i32:
; AVX: # BB#0:
; AVX-NEXT: vmovq {{.*#+}} xmm1 = mem[0],zero
; AVX-NEXT: vpunpcklqdq {{.*#+}} xmm0 = xmm0[0],xmm1[0]
; AVX-NEXT: retq
%a = load <2 x i32>* %ptr
%v = shufflevector <2 x i32> %a, <2 x i32> undef, <4 x i32> <i32 0, i32 1, i32 undef, i32 undef>
%shuffle = shufflevector <4 x i32> %v, <4 x i32> %b, <4 x i32> <i32 4, i32 5, i32 0, i32 1>
ret <4 x i32> %shuffle
}
define <4 x float> @insert_reg_lo_v4f32(double %a, <4 x float> %b) {
; SSE-LABEL: insert_reg_lo_v4f32:
; SSE: # BB#0:
; SSE-NEXT: movsd {{.*#+}} xmm1 = xmm0[0],xmm1[1]
; SSE-NEXT: movapd %xmm1, %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: insert_reg_lo_v4f32:
; AVX: # BB#0:
; AVX-NEXT: vmovsd {{.*#+}} xmm0 = xmm0[0],xmm1[1]
; AVX-NEXT: retq
%a.cast = bitcast double %a to <2 x float>
%v = shufflevector <2 x float> %a.cast, <2 x float> undef, <4 x i32> <i32 0, i32 1, i32 undef, i32 undef>
%shuffle = shufflevector <4 x float> %v, <4 x float> %b, <4 x i32> <i32 0, i32 1, i32 6, i32 7>
ret <4 x float> %shuffle
}
define <4 x float> @insert_mem_lo_v4f32(<2 x float>* %ptr, <4 x float> %b) {
; SSE-LABEL: insert_mem_lo_v4f32:
; SSE: # BB#0:
; SSE-NEXT: movlpd (%rdi), %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: insert_mem_lo_v4f32:
; AVX: # BB#0:
; AVX-NEXT: vmovlpd (%rdi), %xmm0, %xmm0
; AVX-NEXT: retq
%a = load <2 x float>* %ptr
%v = shufflevector <2 x float> %a, <2 x float> undef, <4 x i32> <i32 0, i32 1, i32 undef, i32 undef>
%shuffle = shufflevector <4 x float> %v, <4 x float> %b, <4 x i32> <i32 0, i32 1, i32 6, i32 7>
ret <4 x float> %shuffle
}
define <4 x float> @insert_reg_hi_v4f32(double %a, <4 x float> %b) {
; SSE-LABEL: insert_reg_hi_v4f32:
; SSE: # BB#0:
; SSE-NEXT: unpcklpd {{.*#+}} xmm1 = xmm1[0],xmm0[0]
; SSE-NEXT: movapd %xmm1, %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: insert_reg_hi_v4f32:
; AVX: # BB#0:
; AVX-NEXT: vunpcklpd {{.*#+}} xmm0 = xmm1[0],xmm0[0]
; AVX-NEXT: retq
%a.cast = bitcast double %a to <2 x float>
%v = shufflevector <2 x float> %a.cast, <2 x float> undef, <4 x i32> <i32 0, i32 1, i32 undef, i32 undef>
%shuffle = shufflevector <4 x float> %v, <4 x float> %b, <4 x i32> <i32 4, i32 5, i32 0, i32 1>
ret <4 x float> %shuffle
}
define <4 x float> @insert_mem_hi_v4f32(<2 x float>* %ptr, <4 x float> %b) {
; SSE-LABEL: insert_mem_hi_v4f32:
; SSE: # BB#0:
; SSE-NEXT: movhpd (%rdi), %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: insert_mem_hi_v4f32:
; AVX: # BB#0:
; AVX-NEXT: vmovhpd (%rdi), %xmm0, %xmm0
; AVX-NEXT: retq
%a = load <2 x float>* %ptr
%v = shufflevector <2 x float> %a, <2 x float> undef, <4 x i32> <i32 0, i32 1, i32 undef, i32 undef>
%shuffle = shufflevector <4 x float> %v, <4 x float> %b, <4 x i32> <i32 4, i32 5, i32 0, i32 1>
ret <4 x float> %shuffle
}
define <4 x float> @shuffle_mem_v4f32_3210(<4 x float>* %ptr) {
; SSE-LABEL: shuffle_mem_v4f32_3210:
; SSE: # BB#0:
; SSE-NEXT: movaps (%rdi), %xmm0
; SSE-NEXT: shufps {{.*#+}} xmm0 = xmm0[3,2,1,0]
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_mem_v4f32_3210:
; AVX: # BB#0:
; AVX-NEXT: vpermilps {{.*#+}} xmm0 = mem[3,2,1,0]
; AVX-NEXT: retq
%a = load <4 x float>* %ptr
%shuffle = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 3, i32 2, i32 1, i32 0>
ret <4 x float> %shuffle
}
;
; Shuffle to logical bit shifts
;
define <4 x i32> @shuffle_v4i32_z0zX(<4 x i32> %a) {
; SSE-LABEL: shuffle_v4i32_z0zX:
; SSE: # BB#0:
; SSE-NEXT: psllq $32, %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_z0zX:
; AVX: # BB#0:
; AVX-NEXT: vpsllq $32, %xmm0, %xmm0
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> zeroinitializer, <4 x i32> <i32 4, i32 0, i32 4, i32 undef>
ret <4 x i32> %shuffle
}
define <4 x i32> @shuffle_v4i32_1z3z(<4 x i32> %a) {
; SSE-LABEL: shuffle_v4i32_1z3z:
; SSE: # BB#0:
; SSE-NEXT: psrlq $32, %xmm0
; SSE-NEXT: retq
;
; AVX-LABEL: shuffle_v4i32_1z3z:
; AVX: # BB#0:
; AVX-NEXT: vpsrlq $32, %xmm0, %xmm0
; AVX-NEXT: retq
%shuffle = shufflevector <4 x i32> %a, <4 x i32> zeroinitializer, <4 x i32> <i32 1, i32 4, i32 3, i32 4>
ret <4 x i32> %shuffle
}