llvm-project/llvm/lib/Target/PowerPC/PPCInstrInfo.cpp

2247 lines
82 KiB
C++
Raw Normal View History

//===-- PPCInstrInfo.cpp - PowerPC Instruction Information ----------------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file contains the PowerPC implementation of the TargetInstrInfo class.
//
//===----------------------------------------------------------------------===//
#include "PPCInstrInfo.h"
#include "MCTargetDesc/PPCPredicates.h"
#include "PPC.h"
#include "PPCHazardRecognizers.h"
#include "PPCInstrBuilder.h"
#include "PPCMachineFunctionInfo.h"
#include "PPCTargetMachine.h"
#include "llvm/ADT/STLExtras.h"
#include "llvm/ADT/Statistic.h"
[PowerPC] Select between VSX A-type and M-type FMA instructions just before RA The VSX instruction set has two types of FMA instructions: A-type (where the addend is taken from the output register) and M-type (where one of the product operands is taken from the output register). This adds a small pass that runs just after MI scheduling (and, thus, just before register allocation) that mutates A-type instructions (that are created during isel) into M-type instructions when: 1. This will eliminate an otherwise-necessary copy of the addend 2. One of the product operands is killed by the instruction The "right" moment to make this decision is in between scheduling and register allocation, because only there do we know whether or not one of the product operands is killed by any particular instruction. Unfortunately, this also makes the implementation somewhat complicated, because the MIs are not in SSA form and we need to preserve the LiveIntervals analysis. As a simple example, if we have: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 ... %vreg9<def,tied1> = XSMADDADP %vreg9<tied0>, %vreg17, %vreg19, %RM<imp-use>; VSLRC:%vreg9,%vreg17,%vreg19 ... We can eliminate the copy by changing from the A-type to the M-type instruction. This means: %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 is replaced by: %vreg16<def,tied1> = XSMADDMDP %vreg16<tied0>, %vreg18, %vreg9, %RM<imp-use>; VSLRC:%vreg16,%vreg18,%vreg9 and we remove: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 llvm-svn: 204768
2014-03-26 07:29:21 +08:00
#include "llvm/CodeGen/LiveIntervalAnalysis.h"
#include "llvm/CodeGen/MachineFrameInfo.h"
#include "llvm/CodeGen/MachineFunctionPass.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
#include "llvm/CodeGen/MachineMemOperand.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
#include "llvm/CodeGen/PseudoSourceValue.h"
#include "llvm/CodeGen/ScheduleDAG.h"
[PowerPC] Select between VSX A-type and M-type FMA instructions just before RA The VSX instruction set has two types of FMA instructions: A-type (where the addend is taken from the output register) and M-type (where one of the product operands is taken from the output register). This adds a small pass that runs just after MI scheduling (and, thus, just before register allocation) that mutates A-type instructions (that are created during isel) into M-type instructions when: 1. This will eliminate an otherwise-necessary copy of the addend 2. One of the product operands is killed by the instruction The "right" moment to make this decision is in between scheduling and register allocation, because only there do we know whether or not one of the product operands is killed by any particular instruction. Unfortunately, this also makes the implementation somewhat complicated, because the MIs are not in SSA form and we need to preserve the LiveIntervals analysis. As a simple example, if we have: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 ... %vreg9<def,tied1> = XSMADDADP %vreg9<tied0>, %vreg17, %vreg19, %RM<imp-use>; VSLRC:%vreg9,%vreg17,%vreg19 ... We can eliminate the copy by changing from the A-type to the M-type instruction. This means: %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 is replaced by: %vreg16<def,tied1> = XSMADDMDP %vreg16<tied0>, %vreg18, %vreg9, %RM<imp-use>; VSLRC:%vreg16,%vreg18,%vreg9 and we remove: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 llvm-svn: 204768
2014-03-26 07:29:21 +08:00
#include "llvm/CodeGen/SlotIndexes.h"
#include "llvm/MC/MCAsmInfo.h"
#include "llvm/Support/CommandLine.h"
[PowerPC] Select between VSX A-type and M-type FMA instructions just before RA The VSX instruction set has two types of FMA instructions: A-type (where the addend is taken from the output register) and M-type (where one of the product operands is taken from the output register). This adds a small pass that runs just after MI scheduling (and, thus, just before register allocation) that mutates A-type instructions (that are created during isel) into M-type instructions when: 1. This will eliminate an otherwise-necessary copy of the addend 2. One of the product operands is killed by the instruction The "right" moment to make this decision is in between scheduling and register allocation, because only there do we know whether or not one of the product operands is killed by any particular instruction. Unfortunately, this also makes the implementation somewhat complicated, because the MIs are not in SSA form and we need to preserve the LiveIntervals analysis. As a simple example, if we have: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 ... %vreg9<def,tied1> = XSMADDADP %vreg9<tied0>, %vreg17, %vreg19, %RM<imp-use>; VSLRC:%vreg9,%vreg17,%vreg19 ... We can eliminate the copy by changing from the A-type to the M-type instruction. This means: %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 is replaced by: %vreg16<def,tied1> = XSMADDMDP %vreg16<tied0>, %vreg18, %vreg9, %RM<imp-use>; VSLRC:%vreg16,%vreg18,%vreg9 and we remove: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 llvm-svn: 204768
2014-03-26 07:29:21 +08:00
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/TargetRegistry.h"
#include "llvm/Support/raw_ostream.h"
using namespace llvm;
[Modules] Make Support/Debug.h modular. This requires it to not change behavior based on other files defining DEBUG_TYPE, which means it cannot define DEBUG_TYPE at all. This is actually better IMO as it forces folks to define relevant DEBUG_TYPEs for their files. However, it requires all files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't already. I've updated all such files in LLVM and will do the same for other upstream projects. This still leaves one important change in how LLVM uses the DEBUG_TYPE macro going forward: we need to only define the macro *after* header files have been #include-ed. Previously, this wasn't possible because Debug.h required the macro to be pre-defined. This commit removes that. By defining DEBUG_TYPE after the includes two things are fixed: - Header files that need to provide a DEBUG_TYPE for some inline code can do so by defining the macro before their inline code and undef-ing it afterward so the macro does not escape. - We no longer have rampant ODR violations due to including headers with different DEBUG_TYPE definitions. This may be mostly an academic violation today, but with modules these types of violations are easy to check for and potentially very relevant. Where necessary to suppor headers with DEBUG_TYPE, I have moved the definitions below the includes in this commit. I plan to move the rest of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big enough. The comments in Debug.h, which were hilariously out of date already, have been updated to reflect the recommended practice going forward. llvm-svn: 206822
2014-04-22 06:55:11 +08:00
#define DEBUG_TYPE "ppc-instr-info"
#define GET_INSTRMAP_INFO
#define GET_INSTRINFO_CTOR_DTOR
#include "PPCGenInstrInfo.inc"
static cl::
opt<bool> DisableCTRLoopAnal("disable-ppc-ctrloop-analysis", cl::Hidden,
cl::desc("Disable analysis for CTR loops"));
static cl::opt<bool> DisableCmpOpt("disable-ppc-cmp-opt",
cl::desc("Disable compare instruction optimization"), cl::Hidden);
[PowerPC] Select between VSX A-type and M-type FMA instructions just before RA The VSX instruction set has two types of FMA instructions: A-type (where the addend is taken from the output register) and M-type (where one of the product operands is taken from the output register). This adds a small pass that runs just after MI scheduling (and, thus, just before register allocation) that mutates A-type instructions (that are created during isel) into M-type instructions when: 1. This will eliminate an otherwise-necessary copy of the addend 2. One of the product operands is killed by the instruction The "right" moment to make this decision is in between scheduling and register allocation, because only there do we know whether or not one of the product operands is killed by any particular instruction. Unfortunately, this also makes the implementation somewhat complicated, because the MIs are not in SSA form and we need to preserve the LiveIntervals analysis. As a simple example, if we have: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 ... %vreg9<def,tied1> = XSMADDADP %vreg9<tied0>, %vreg17, %vreg19, %RM<imp-use>; VSLRC:%vreg9,%vreg17,%vreg19 ... We can eliminate the copy by changing from the A-type to the M-type instruction. This means: %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 is replaced by: %vreg16<def,tied1> = XSMADDMDP %vreg16<tied0>, %vreg18, %vreg9, %RM<imp-use>; VSLRC:%vreg16,%vreg18,%vreg9 and we remove: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 llvm-svn: 204768
2014-03-26 07:29:21 +08:00
static cl::opt<bool> DisableVSXFMAMutate("disable-ppc-vsx-fma-mutation",
cl::desc("Disable VSX FMA instruction mutation"), cl::Hidden);
static cl::opt<bool> VSXSelfCopyCrash("crash-on-ppc-vsx-self-copy",
cl::desc("Causes the backend to crash instead of generating a nop VSX copy"),
cl::Hidden);
// Pin the vtable to this file.
void PPCInstrInfo::anchor() {}
PPCInstrInfo::PPCInstrInfo(PPCSubtarget &STI)
: PPCGenInstrInfo(PPC::ADJCALLSTACKDOWN, PPC::ADJCALLSTACKUP),
Subtarget(STI), RI(STI) {}
/// CreateTargetHazardRecognizer - Return the hazard recognizer to use for
/// this target when scheduling the DAG.
ScheduleHazardRecognizer *
PPCInstrInfo::CreateTargetHazardRecognizer(const TargetSubtargetInfo *STI,
const ScheduleDAG *DAG) const {
unsigned Directive =
static_cast<const PPCSubtarget *>(STI)->getDarwinDirective();
if (Directive == PPC::DIR_440 || Directive == PPC::DIR_A2 ||
Directive == PPC::DIR_E500mc || Directive == PPC::DIR_E5500) {
const InstrItineraryData *II =
static_cast<const PPCSubtarget *>(STI)->getInstrItineraryData();
return new ScoreboardHazardRecognizer(II, DAG);
}
return TargetInstrInfo::CreateTargetHazardRecognizer(STI, DAG);
}
/// CreateTargetPostRAHazardRecognizer - Return the postRA hazard recognizer
/// to use for this target when scheduling the DAG.
ScheduleHazardRecognizer *PPCInstrInfo::CreateTargetPostRAHazardRecognizer(
const InstrItineraryData *II,
const ScheduleDAG *DAG) const {
unsigned Directive =
DAG->TM.getSubtarget<PPCSubtarget>().getDarwinDirective();
if (Directive == PPC::DIR_PWR7 || Directive == PPC::DIR_PWR8)
Improve instruction scheduling for the PPC POWER7 Aside from a few minor latency corrections, the major change here is a new hazard recognizer which focuses on better dispatch-group formation on the POWER7. As with the PPC970's hazard recognizer, the most important thing it does is avoid load-after-store hazards within the same dispatch group. It uses the POWER7's special dispatch-group-terminating nop instruction (instead of inserting multiple regular nop instructions). This new hazard recognizer makes use of the scheduling dependency graph itself, built using AA information, to robustly detect the possibility of load-after-store hazards. significant test-suite performance changes (the error bars are 99.5% confidence intervals based on 5 test-suite runs both with and without the change -- speedups are negative): speedups: MultiSource/Benchmarks/FreeBench/pcompress2/pcompress2 -0.55171% +/- 0.333168% MultiSource/Benchmarks/TSVC/CrossingThresholds-dbl/CrossingThresholds-dbl -17.5576% +/- 14.598% MultiSource/Benchmarks/TSVC/Reductions-dbl/Reductions-dbl -29.5708% +/- 7.09058% MultiSource/Benchmarks/TSVC/Reductions-flt/Reductions-flt -34.9471% +/- 11.4391% SingleSource/Benchmarks/BenchmarkGame/puzzle -25.1347% +/- 11.0104% SingleSource/Benchmarks/Misc/flops-8 -17.7297% +/- 9.79061% SingleSource/Benchmarks/Shootout-C++/ary3 -35.5018% +/- 23.9458% SingleSource/Regression/C/uint64_to_float -56.3165% +/- 25.4234% SingleSource/UnitTests/Vectorizer/gcc-loops -18.5309% +/- 6.8496% regressions: MultiSource/Benchmarks/ASCI_Purple/SMG2000/smg2000 18.351% +/- 12.156% SingleSource/Benchmarks/Shootout-C++/methcall 27.3086% +/- 14.4733% llvm-svn: 197099
2013-12-12 08:19:11 +08:00
return new PPCDispatchGroupSBHazardRecognizer(II, DAG);
// Most subtargets use a PPC970 recognizer.
if (Directive != PPC::DIR_440 && Directive != PPC::DIR_A2 &&
Directive != PPC::DIR_E500mc && Directive != PPC::DIR_E5500) {
assert(DAG->TII && "No InstrInfo?");
return new PPCHazardRecognizer970(*DAG);
}
return new ScoreboardHazardRecognizer(II, DAG);
}
Improve instruction scheduling for the PPC POWER7 Aside from a few minor latency corrections, the major change here is a new hazard recognizer which focuses on better dispatch-group formation on the POWER7. As with the PPC970's hazard recognizer, the most important thing it does is avoid load-after-store hazards within the same dispatch group. It uses the POWER7's special dispatch-group-terminating nop instruction (instead of inserting multiple regular nop instructions). This new hazard recognizer makes use of the scheduling dependency graph itself, built using AA information, to robustly detect the possibility of load-after-store hazards. significant test-suite performance changes (the error bars are 99.5% confidence intervals based on 5 test-suite runs both with and without the change -- speedups are negative): speedups: MultiSource/Benchmarks/FreeBench/pcompress2/pcompress2 -0.55171% +/- 0.333168% MultiSource/Benchmarks/TSVC/CrossingThresholds-dbl/CrossingThresholds-dbl -17.5576% +/- 14.598% MultiSource/Benchmarks/TSVC/Reductions-dbl/Reductions-dbl -29.5708% +/- 7.09058% MultiSource/Benchmarks/TSVC/Reductions-flt/Reductions-flt -34.9471% +/- 11.4391% SingleSource/Benchmarks/BenchmarkGame/puzzle -25.1347% +/- 11.0104% SingleSource/Benchmarks/Misc/flops-8 -17.7297% +/- 9.79061% SingleSource/Benchmarks/Shootout-C++/ary3 -35.5018% +/- 23.9458% SingleSource/Regression/C/uint64_to_float -56.3165% +/- 25.4234% SingleSource/UnitTests/Vectorizer/gcc-loops -18.5309% +/- 6.8496% regressions: MultiSource/Benchmarks/ASCI_Purple/SMG2000/smg2000 18.351% +/- 12.156% SingleSource/Benchmarks/Shootout-C++/methcall 27.3086% +/- 14.4733% llvm-svn: 197099
2013-12-12 08:19:11 +08:00
int PPCInstrInfo::getOperandLatency(const InstrItineraryData *ItinData,
const MachineInstr *DefMI, unsigned DefIdx,
const MachineInstr *UseMI,
unsigned UseIdx) const {
int Latency = PPCGenInstrInfo::getOperandLatency(ItinData, DefMI, DefIdx,
UseMI, UseIdx);
const MachineOperand &DefMO = DefMI->getOperand(DefIdx);
unsigned Reg = DefMO.getReg();
const TargetRegisterInfo *TRI = &getRegisterInfo();
bool IsRegCR;
if (TRI->isVirtualRegister(Reg)) {
const MachineRegisterInfo *MRI =
&DefMI->getParent()->getParent()->getRegInfo();
IsRegCR = MRI->getRegClass(Reg)->hasSuperClassEq(&PPC::CRRCRegClass) ||
MRI->getRegClass(Reg)->hasSuperClassEq(&PPC::CRBITRCRegClass);
} else {
IsRegCR = PPC::CRRCRegClass.contains(Reg) ||
PPC::CRBITRCRegClass.contains(Reg);
}
if (UseMI->isBranch() && IsRegCR) {
if (Latency < 0)
Latency = getInstrLatency(ItinData, DefMI);
// On some cores, there is an additional delay between writing to a condition
// register, and using it from a branch.
unsigned Directive = Subtarget.getDarwinDirective();
Improve instruction scheduling for the PPC POWER7 Aside from a few minor latency corrections, the major change here is a new hazard recognizer which focuses on better dispatch-group formation on the POWER7. As with the PPC970's hazard recognizer, the most important thing it does is avoid load-after-store hazards within the same dispatch group. It uses the POWER7's special dispatch-group-terminating nop instruction (instead of inserting multiple regular nop instructions). This new hazard recognizer makes use of the scheduling dependency graph itself, built using AA information, to robustly detect the possibility of load-after-store hazards. significant test-suite performance changes (the error bars are 99.5% confidence intervals based on 5 test-suite runs both with and without the change -- speedups are negative): speedups: MultiSource/Benchmarks/FreeBench/pcompress2/pcompress2 -0.55171% +/- 0.333168% MultiSource/Benchmarks/TSVC/CrossingThresholds-dbl/CrossingThresholds-dbl -17.5576% +/- 14.598% MultiSource/Benchmarks/TSVC/Reductions-dbl/Reductions-dbl -29.5708% +/- 7.09058% MultiSource/Benchmarks/TSVC/Reductions-flt/Reductions-flt -34.9471% +/- 11.4391% SingleSource/Benchmarks/BenchmarkGame/puzzle -25.1347% +/- 11.0104% SingleSource/Benchmarks/Misc/flops-8 -17.7297% +/- 9.79061% SingleSource/Benchmarks/Shootout-C++/ary3 -35.5018% +/- 23.9458% SingleSource/Regression/C/uint64_to_float -56.3165% +/- 25.4234% SingleSource/UnitTests/Vectorizer/gcc-loops -18.5309% +/- 6.8496% regressions: MultiSource/Benchmarks/ASCI_Purple/SMG2000/smg2000 18.351% +/- 12.156% SingleSource/Benchmarks/Shootout-C++/methcall 27.3086% +/- 14.4733% llvm-svn: 197099
2013-12-12 08:19:11 +08:00
switch (Directive) {
default: break;
case PPC::DIR_7400:
case PPC::DIR_750:
case PPC::DIR_970:
case PPC::DIR_E5500:
case PPC::DIR_PWR4:
case PPC::DIR_PWR5:
case PPC::DIR_PWR5X:
case PPC::DIR_PWR6:
case PPC::DIR_PWR6X:
case PPC::DIR_PWR7:
case PPC::DIR_PWR8:
Improve instruction scheduling for the PPC POWER7 Aside from a few minor latency corrections, the major change here is a new hazard recognizer which focuses on better dispatch-group formation on the POWER7. As with the PPC970's hazard recognizer, the most important thing it does is avoid load-after-store hazards within the same dispatch group. It uses the POWER7's special dispatch-group-terminating nop instruction (instead of inserting multiple regular nop instructions). This new hazard recognizer makes use of the scheduling dependency graph itself, built using AA information, to robustly detect the possibility of load-after-store hazards. significant test-suite performance changes (the error bars are 99.5% confidence intervals based on 5 test-suite runs both with and without the change -- speedups are negative): speedups: MultiSource/Benchmarks/FreeBench/pcompress2/pcompress2 -0.55171% +/- 0.333168% MultiSource/Benchmarks/TSVC/CrossingThresholds-dbl/CrossingThresholds-dbl -17.5576% +/- 14.598% MultiSource/Benchmarks/TSVC/Reductions-dbl/Reductions-dbl -29.5708% +/- 7.09058% MultiSource/Benchmarks/TSVC/Reductions-flt/Reductions-flt -34.9471% +/- 11.4391% SingleSource/Benchmarks/BenchmarkGame/puzzle -25.1347% +/- 11.0104% SingleSource/Benchmarks/Misc/flops-8 -17.7297% +/- 9.79061% SingleSource/Benchmarks/Shootout-C++/ary3 -35.5018% +/- 23.9458% SingleSource/Regression/C/uint64_to_float -56.3165% +/- 25.4234% SingleSource/UnitTests/Vectorizer/gcc-loops -18.5309% +/- 6.8496% regressions: MultiSource/Benchmarks/ASCI_Purple/SMG2000/smg2000 18.351% +/- 12.156% SingleSource/Benchmarks/Shootout-C++/methcall 27.3086% +/- 14.4733% llvm-svn: 197099
2013-12-12 08:19:11 +08:00
Latency += 2;
break;
}
}
return Latency;
}
// Detect 32 -> 64-bit extensions where we may reuse the low sub-register.
bool PPCInstrInfo::isCoalescableExtInstr(const MachineInstr &MI,
unsigned &SrcReg, unsigned &DstReg,
unsigned &SubIdx) const {
switch (MI.getOpcode()) {
default: return false;
case PPC::EXTSW:
case PPC::EXTSW_32_64:
SrcReg = MI.getOperand(1).getReg();
DstReg = MI.getOperand(0).getReg();
SubIdx = PPC::sub_32;
return true;
}
}
2010-12-24 12:28:06 +08:00
unsigned PPCInstrInfo::isLoadFromStackSlot(const MachineInstr *MI,
int &FrameIndex) const {
// Note: This list must be kept consistent with LoadRegFromStackSlot.
switch (MI->getOpcode()) {
default: break;
case PPC::LD:
case PPC::LWZ:
case PPC::LFS:
case PPC::LFD:
case PPC::RESTORE_CR:
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
case PPC::RESTORE_CRBIT:
case PPC::LVX:
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
case PPC::LXVD2X:
case PPC::RESTORE_VRSAVE:
// Check for the operands added by addFrameReference (the immediate is the
// offset which defaults to 0).
if (MI->getOperand(1).isImm() && !MI->getOperand(1).getImm() &&
MI->getOperand(2).isFI()) {
FrameIndex = MI->getOperand(2).getIndex();
return MI->getOperand(0).getReg();
}
break;
}
return 0;
}
2010-12-24 12:28:06 +08:00
unsigned PPCInstrInfo::isStoreToStackSlot(const MachineInstr *MI,
int &FrameIndex) const {
// Note: This list must be kept consistent with StoreRegToStackSlot.
switch (MI->getOpcode()) {
default: break;
case PPC::STD:
case PPC::STW:
case PPC::STFS:
case PPC::STFD:
case PPC::SPILL_CR:
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
case PPC::SPILL_CRBIT:
case PPC::STVX:
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
case PPC::STXVD2X:
case PPC::SPILL_VRSAVE:
// Check for the operands added by addFrameReference (the immediate is the
// offset which defaults to 0).
if (MI->getOperand(1).isImm() && !MI->getOperand(1).getImm() &&
MI->getOperand(2).isFI()) {
FrameIndex = MI->getOperand(2).getIndex();
return MI->getOperand(0).getReg();
}
break;
}
return 0;
}
// commuteInstruction - We can commute rlwimi instructions, but only if the
// rotate amt is zero. We also have to munge the immediates a bit.
MachineInstr *
PPCInstrInfo::commuteInstruction(MachineInstr *MI, bool NewMI) const {
MachineFunction &MF = *MI->getParent()->getParent();
// Normal instructions can be commuted the obvious way.
if (MI->getOpcode() != PPC::RLWIMI &&
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
MI->getOpcode() != PPC::RLWIMIo &&
MI->getOpcode() != PPC::RLWIMI8 &&
MI->getOpcode() != PPC::RLWIMI8o)
return TargetInstrInfo::commuteInstruction(MI, NewMI);
2010-12-24 12:28:06 +08:00
// Cannot commute if it has a non-zero rotate count.
if (MI->getOperand(3).getImm() != 0)
return nullptr;
2010-12-24 12:28:06 +08:00
// If we have a zero rotate count, we have:
// M = mask(MB,ME)
// Op0 = (Op1 & ~M) | (Op2 & M)
// Change this to:
// M = mask((ME+1)&31, (MB-1)&31)
// Op0 = (Op2 & ~M) | (Op1 & M)
// Swap op1/op2
unsigned Reg0 = MI->getOperand(0).getReg();
unsigned Reg1 = MI->getOperand(1).getReg();
unsigned Reg2 = MI->getOperand(2).getReg();
unsigned SubReg1 = MI->getOperand(1).getSubReg();
unsigned SubReg2 = MI->getOperand(2).getSubReg();
bool Reg1IsKill = MI->getOperand(1).isKill();
bool Reg2IsKill = MI->getOperand(2).isKill();
bool ChangeReg0 = false;
// If machine instrs are no longer in two-address forms, update
// destination register as well.
if (Reg0 == Reg1) {
// Must be two address instruction!
assert(MI->getDesc().getOperandConstraint(0, MCOI::TIED_TO) &&
"Expecting a two-address instruction!");
assert(MI->getOperand(0).getSubReg() == SubReg1 && "Tied subreg mismatch");
Reg2IsKill = false;
ChangeReg0 = true;
}
// Masks.
unsigned MB = MI->getOperand(4).getImm();
unsigned ME = MI->getOperand(5).getImm();
if (NewMI) {
// Create a new instruction.
unsigned Reg0 = ChangeReg0 ? Reg2 : MI->getOperand(0).getReg();
bool Reg0IsDead = MI->getOperand(0).isDead();
return BuildMI(MF, MI->getDebugLoc(), MI->getDesc())
.addReg(Reg0, RegState::Define | getDeadRegState(Reg0IsDead))
.addReg(Reg2, getKillRegState(Reg2IsKill))
.addReg(Reg1, getKillRegState(Reg1IsKill))
.addImm((ME+1) & 31)
.addImm((MB-1) & 31);
}
if (ChangeReg0) {
MI->getOperand(0).setReg(Reg2);
MI->getOperand(0).setSubReg(SubReg2);
}
MI->getOperand(2).setReg(Reg1);
MI->getOperand(1).setReg(Reg2);
MI->getOperand(2).setSubReg(SubReg1);
MI->getOperand(1).setSubReg(SubReg2);
MI->getOperand(2).setIsKill(Reg1IsKill);
MI->getOperand(1).setIsKill(Reg2IsKill);
2010-12-24 12:28:06 +08:00
// Swap the mask around.
MI->getOperand(4).setImm((ME+1) & 31);
MI->getOperand(5).setImm((MB-1) & 31);
return MI;
}
bool PPCInstrInfo::findCommutedOpIndices(MachineInstr *MI, unsigned &SrcOpIdx1,
unsigned &SrcOpIdx2) const {
// For VSX A-Type FMA instructions, it is the first two operands that can be
// commuted, however, because the non-encoded tied input operand is listed
// first, the operands to swap are actually the second and third.
int AltOpc = PPC::getAltVSXFMAOpcode(MI->getOpcode());
if (AltOpc == -1)
return TargetInstrInfo::findCommutedOpIndices(MI, SrcOpIdx1, SrcOpIdx2);
SrcOpIdx1 = 2;
SrcOpIdx2 = 3;
return true;
}
2010-12-24 12:28:06 +08:00
void PPCInstrInfo::insertNoop(MachineBasicBlock &MBB,
MachineBasicBlock::iterator MI) const {
Improve instruction scheduling for the PPC POWER7 Aside from a few minor latency corrections, the major change here is a new hazard recognizer which focuses on better dispatch-group formation on the POWER7. As with the PPC970's hazard recognizer, the most important thing it does is avoid load-after-store hazards within the same dispatch group. It uses the POWER7's special dispatch-group-terminating nop instruction (instead of inserting multiple regular nop instructions). This new hazard recognizer makes use of the scheduling dependency graph itself, built using AA information, to robustly detect the possibility of load-after-store hazards. significant test-suite performance changes (the error bars are 99.5% confidence intervals based on 5 test-suite runs both with and without the change -- speedups are negative): speedups: MultiSource/Benchmarks/FreeBench/pcompress2/pcompress2 -0.55171% +/- 0.333168% MultiSource/Benchmarks/TSVC/CrossingThresholds-dbl/CrossingThresholds-dbl -17.5576% +/- 14.598% MultiSource/Benchmarks/TSVC/Reductions-dbl/Reductions-dbl -29.5708% +/- 7.09058% MultiSource/Benchmarks/TSVC/Reductions-flt/Reductions-flt -34.9471% +/- 11.4391% SingleSource/Benchmarks/BenchmarkGame/puzzle -25.1347% +/- 11.0104% SingleSource/Benchmarks/Misc/flops-8 -17.7297% +/- 9.79061% SingleSource/Benchmarks/Shootout-C++/ary3 -35.5018% +/- 23.9458% SingleSource/Regression/C/uint64_to_float -56.3165% +/- 25.4234% SingleSource/UnitTests/Vectorizer/gcc-loops -18.5309% +/- 6.8496% regressions: MultiSource/Benchmarks/ASCI_Purple/SMG2000/smg2000 18.351% +/- 12.156% SingleSource/Benchmarks/Shootout-C++/methcall 27.3086% +/- 14.4733% llvm-svn: 197099
2013-12-12 08:19:11 +08:00
// This function is used for scheduling, and the nop wanted here is the type
// that terminates dispatch groups on the POWER cores.
unsigned Directive = Subtarget.getDarwinDirective();
Improve instruction scheduling for the PPC POWER7 Aside from a few minor latency corrections, the major change here is a new hazard recognizer which focuses on better dispatch-group formation on the POWER7. As with the PPC970's hazard recognizer, the most important thing it does is avoid load-after-store hazards within the same dispatch group. It uses the POWER7's special dispatch-group-terminating nop instruction (instead of inserting multiple regular nop instructions). This new hazard recognizer makes use of the scheduling dependency graph itself, built using AA information, to robustly detect the possibility of load-after-store hazards. significant test-suite performance changes (the error bars are 99.5% confidence intervals based on 5 test-suite runs both with and without the change -- speedups are negative): speedups: MultiSource/Benchmarks/FreeBench/pcompress2/pcompress2 -0.55171% +/- 0.333168% MultiSource/Benchmarks/TSVC/CrossingThresholds-dbl/CrossingThresholds-dbl -17.5576% +/- 14.598% MultiSource/Benchmarks/TSVC/Reductions-dbl/Reductions-dbl -29.5708% +/- 7.09058% MultiSource/Benchmarks/TSVC/Reductions-flt/Reductions-flt -34.9471% +/- 11.4391% SingleSource/Benchmarks/BenchmarkGame/puzzle -25.1347% +/- 11.0104% SingleSource/Benchmarks/Misc/flops-8 -17.7297% +/- 9.79061% SingleSource/Benchmarks/Shootout-C++/ary3 -35.5018% +/- 23.9458% SingleSource/Regression/C/uint64_to_float -56.3165% +/- 25.4234% SingleSource/UnitTests/Vectorizer/gcc-loops -18.5309% +/- 6.8496% regressions: MultiSource/Benchmarks/ASCI_Purple/SMG2000/smg2000 18.351% +/- 12.156% SingleSource/Benchmarks/Shootout-C++/methcall 27.3086% +/- 14.4733% llvm-svn: 197099
2013-12-12 08:19:11 +08:00
unsigned Opcode;
switch (Directive) {
default: Opcode = PPC::NOP; break;
case PPC::DIR_PWR6: Opcode = PPC::NOP_GT_PWR6; break;
case PPC::DIR_PWR7: Opcode = PPC::NOP_GT_PWR7; break;
case PPC::DIR_PWR8: Opcode = PPC::NOP_GT_PWR7; break; /* FIXME: Update when P8 InstrScheduling model is ready */
Improve instruction scheduling for the PPC POWER7 Aside from a few minor latency corrections, the major change here is a new hazard recognizer which focuses on better dispatch-group formation on the POWER7. As with the PPC970's hazard recognizer, the most important thing it does is avoid load-after-store hazards within the same dispatch group. It uses the POWER7's special dispatch-group-terminating nop instruction (instead of inserting multiple regular nop instructions). This new hazard recognizer makes use of the scheduling dependency graph itself, built using AA information, to robustly detect the possibility of load-after-store hazards. significant test-suite performance changes (the error bars are 99.5% confidence intervals based on 5 test-suite runs both with and without the change -- speedups are negative): speedups: MultiSource/Benchmarks/FreeBench/pcompress2/pcompress2 -0.55171% +/- 0.333168% MultiSource/Benchmarks/TSVC/CrossingThresholds-dbl/CrossingThresholds-dbl -17.5576% +/- 14.598% MultiSource/Benchmarks/TSVC/Reductions-dbl/Reductions-dbl -29.5708% +/- 7.09058% MultiSource/Benchmarks/TSVC/Reductions-flt/Reductions-flt -34.9471% +/- 11.4391% SingleSource/Benchmarks/BenchmarkGame/puzzle -25.1347% +/- 11.0104% SingleSource/Benchmarks/Misc/flops-8 -17.7297% +/- 9.79061% SingleSource/Benchmarks/Shootout-C++/ary3 -35.5018% +/- 23.9458% SingleSource/Regression/C/uint64_to_float -56.3165% +/- 25.4234% SingleSource/UnitTests/Vectorizer/gcc-loops -18.5309% +/- 6.8496% regressions: MultiSource/Benchmarks/ASCI_Purple/SMG2000/smg2000 18.351% +/- 12.156% SingleSource/Benchmarks/Shootout-C++/methcall 27.3086% +/- 14.4733% llvm-svn: 197099
2013-12-12 08:19:11 +08:00
}
DebugLoc DL;
Improve instruction scheduling for the PPC POWER7 Aside from a few minor latency corrections, the major change here is a new hazard recognizer which focuses on better dispatch-group formation on the POWER7. As with the PPC970's hazard recognizer, the most important thing it does is avoid load-after-store hazards within the same dispatch group. It uses the POWER7's special dispatch-group-terminating nop instruction (instead of inserting multiple regular nop instructions). This new hazard recognizer makes use of the scheduling dependency graph itself, built using AA information, to robustly detect the possibility of load-after-store hazards. significant test-suite performance changes (the error bars are 99.5% confidence intervals based on 5 test-suite runs both with and without the change -- speedups are negative): speedups: MultiSource/Benchmarks/FreeBench/pcompress2/pcompress2 -0.55171% +/- 0.333168% MultiSource/Benchmarks/TSVC/CrossingThresholds-dbl/CrossingThresholds-dbl -17.5576% +/- 14.598% MultiSource/Benchmarks/TSVC/Reductions-dbl/Reductions-dbl -29.5708% +/- 7.09058% MultiSource/Benchmarks/TSVC/Reductions-flt/Reductions-flt -34.9471% +/- 11.4391% SingleSource/Benchmarks/BenchmarkGame/puzzle -25.1347% +/- 11.0104% SingleSource/Benchmarks/Misc/flops-8 -17.7297% +/- 9.79061% SingleSource/Benchmarks/Shootout-C++/ary3 -35.5018% +/- 23.9458% SingleSource/Regression/C/uint64_to_float -56.3165% +/- 25.4234% SingleSource/UnitTests/Vectorizer/gcc-loops -18.5309% +/- 6.8496% regressions: MultiSource/Benchmarks/ASCI_Purple/SMG2000/smg2000 18.351% +/- 12.156% SingleSource/Benchmarks/Shootout-C++/methcall 27.3086% +/- 14.4733% llvm-svn: 197099
2013-12-12 08:19:11 +08:00
BuildMI(MBB, MI, DL, get(Opcode));
}
// Branch analysis.
// Note: If the condition register is set to CTR or CTR8 then this is a
// BDNZ (imm == 1) or BDZ (imm == 0) branch.
bool PPCInstrInfo::AnalyzeBranch(MachineBasicBlock &MBB,MachineBasicBlock *&TBB,
MachineBasicBlock *&FBB,
SmallVectorImpl<MachineOperand> &Cond,
bool AllowModify) const {
bool isPPC64 = Subtarget.isPPC64();
// If the block has no terminators, it just falls into the block after it.
MachineBasicBlock::iterator I = MBB.end();
if (I == MBB.begin())
return false;
--I;
while (I->isDebugValue()) {
if (I == MBB.begin())
return false;
--I;
}
if (!isUnpredicatedTerminator(I))
return false;
// Get the last instruction in the block.
MachineInstr *LastInst = I;
2010-12-24 12:28:06 +08:00
// If there is only one terminator instruction, process it.
if (I == MBB.begin() || !isUnpredicatedTerminator(--I)) {
if (LastInst->getOpcode() == PPC::B) {
if (!LastInst->getOperand(0).isMBB())
return true;
TBB = LastInst->getOperand(0).getMBB();
return false;
} else if (LastInst->getOpcode() == PPC::BCC) {
if (!LastInst->getOperand(2).isMBB())
return true;
// Block ends with fall-through condbranch.
TBB = LastInst->getOperand(2).getMBB();
Cond.push_back(LastInst->getOperand(0));
Cond.push_back(LastInst->getOperand(1));
return false;
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
} else if (LastInst->getOpcode() == PPC::BC) {
if (!LastInst->getOperand(1).isMBB())
return true;
// Block ends with fall-through condbranch.
TBB = LastInst->getOperand(1).getMBB();
Cond.push_back(MachineOperand::CreateImm(PPC::PRED_BIT_SET));
Cond.push_back(LastInst->getOperand(0));
return false;
} else if (LastInst->getOpcode() == PPC::BCn) {
if (!LastInst->getOperand(1).isMBB())
return true;
// Block ends with fall-through condbranch.
TBB = LastInst->getOperand(1).getMBB();
Cond.push_back(MachineOperand::CreateImm(PPC::PRED_BIT_UNSET));
Cond.push_back(LastInst->getOperand(0));
return false;
} else if (LastInst->getOpcode() == PPC::BDNZ8 ||
LastInst->getOpcode() == PPC::BDNZ) {
if (!LastInst->getOperand(0).isMBB())
return true;
if (DisableCTRLoopAnal)
return true;
TBB = LastInst->getOperand(0).getMBB();
Cond.push_back(MachineOperand::CreateImm(1));
Cond.push_back(MachineOperand::CreateReg(isPPC64 ? PPC::CTR8 : PPC::CTR,
true));
return false;
} else if (LastInst->getOpcode() == PPC::BDZ8 ||
LastInst->getOpcode() == PPC::BDZ) {
if (!LastInst->getOperand(0).isMBB())
return true;
if (DisableCTRLoopAnal)
return true;
TBB = LastInst->getOperand(0).getMBB();
Cond.push_back(MachineOperand::CreateImm(0));
Cond.push_back(MachineOperand::CreateReg(isPPC64 ? PPC::CTR8 : PPC::CTR,
true));
return false;
}
// Otherwise, don't know what this is.
return true;
}
2010-12-24 12:28:06 +08:00
// Get the instruction before it if it's a terminator.
MachineInstr *SecondLastInst = I;
// If there are three terminators, we don't know what sort of block this is.
if (SecondLastInst && I != MBB.begin() &&
isUnpredicatedTerminator(--I))
return true;
2010-12-24 12:28:06 +08:00
// If the block ends with PPC::B and PPC:BCC, handle it.
2010-12-24 12:28:06 +08:00
if (SecondLastInst->getOpcode() == PPC::BCC &&
LastInst->getOpcode() == PPC::B) {
if (!SecondLastInst->getOperand(2).isMBB() ||
!LastInst->getOperand(0).isMBB())
return true;
TBB = SecondLastInst->getOperand(2).getMBB();
Cond.push_back(SecondLastInst->getOperand(0));
Cond.push_back(SecondLastInst->getOperand(1));
FBB = LastInst->getOperand(0).getMBB();
return false;
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
} else if (SecondLastInst->getOpcode() == PPC::BC &&
LastInst->getOpcode() == PPC::B) {
if (!SecondLastInst->getOperand(1).isMBB() ||
!LastInst->getOperand(0).isMBB())
return true;
TBB = SecondLastInst->getOperand(1).getMBB();
Cond.push_back(MachineOperand::CreateImm(PPC::PRED_BIT_SET));
Cond.push_back(SecondLastInst->getOperand(0));
FBB = LastInst->getOperand(0).getMBB();
return false;
} else if (SecondLastInst->getOpcode() == PPC::BCn &&
LastInst->getOpcode() == PPC::B) {
if (!SecondLastInst->getOperand(1).isMBB() ||
!LastInst->getOperand(0).isMBB())
return true;
TBB = SecondLastInst->getOperand(1).getMBB();
Cond.push_back(MachineOperand::CreateImm(PPC::PRED_BIT_UNSET));
Cond.push_back(SecondLastInst->getOperand(0));
FBB = LastInst->getOperand(0).getMBB();
return false;
} else if ((SecondLastInst->getOpcode() == PPC::BDNZ8 ||
SecondLastInst->getOpcode() == PPC::BDNZ) &&
LastInst->getOpcode() == PPC::B) {
if (!SecondLastInst->getOperand(0).isMBB() ||
!LastInst->getOperand(0).isMBB())
return true;
if (DisableCTRLoopAnal)
return true;
TBB = SecondLastInst->getOperand(0).getMBB();
Cond.push_back(MachineOperand::CreateImm(1));
Cond.push_back(MachineOperand::CreateReg(isPPC64 ? PPC::CTR8 : PPC::CTR,
true));
FBB = LastInst->getOperand(0).getMBB();
return false;
} else if ((SecondLastInst->getOpcode() == PPC::BDZ8 ||
SecondLastInst->getOpcode() == PPC::BDZ) &&
LastInst->getOpcode() == PPC::B) {
if (!SecondLastInst->getOperand(0).isMBB() ||
!LastInst->getOperand(0).isMBB())
return true;
if (DisableCTRLoopAnal)
return true;
TBB = SecondLastInst->getOperand(0).getMBB();
Cond.push_back(MachineOperand::CreateImm(0));
Cond.push_back(MachineOperand::CreateReg(isPPC64 ? PPC::CTR8 : PPC::CTR,
true));
FBB = LastInst->getOperand(0).getMBB();
return false;
}
2010-12-24 12:28:06 +08:00
// If the block ends with two PPC:Bs, handle it. The second one is not
// executed, so remove it.
2010-12-24 12:28:06 +08:00
if (SecondLastInst->getOpcode() == PPC::B &&
LastInst->getOpcode() == PPC::B) {
if (!SecondLastInst->getOperand(0).isMBB())
return true;
TBB = SecondLastInst->getOperand(0).getMBB();
I = LastInst;
if (AllowModify)
I->eraseFromParent();
return false;
}
// Otherwise, can't handle this.
return true;
}
unsigned PPCInstrInfo::RemoveBranch(MachineBasicBlock &MBB) const {
MachineBasicBlock::iterator I = MBB.end();
if (I == MBB.begin()) return 0;
--I;
while (I->isDebugValue()) {
if (I == MBB.begin())
return 0;
--I;
}
if (I->getOpcode() != PPC::B && I->getOpcode() != PPC::BCC &&
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
I->getOpcode() != PPC::BC && I->getOpcode() != PPC::BCn &&
I->getOpcode() != PPC::BDNZ8 && I->getOpcode() != PPC::BDNZ &&
I->getOpcode() != PPC::BDZ8 && I->getOpcode() != PPC::BDZ)
return 0;
2010-12-24 12:28:06 +08:00
// Remove the branch.
I->eraseFromParent();
2010-12-24 12:28:06 +08:00
I = MBB.end();
if (I == MBB.begin()) return 1;
--I;
if (I->getOpcode() != PPC::BCC &&
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
I->getOpcode() != PPC::BC && I->getOpcode() != PPC::BCn &&
I->getOpcode() != PPC::BDNZ8 && I->getOpcode() != PPC::BDNZ &&
I->getOpcode() != PPC::BDZ8 && I->getOpcode() != PPC::BDZ)
return 1;
2010-12-24 12:28:06 +08:00
// Remove the branch.
I->eraseFromParent();
return 2;
}
unsigned
PPCInstrInfo::InsertBranch(MachineBasicBlock &MBB, MachineBasicBlock *TBB,
MachineBasicBlock *FBB,
const SmallVectorImpl<MachineOperand> &Cond,
DebugLoc DL) const {
// Shouldn't be a fall through.
assert(TBB && "InsertBranch must not be told to insert a fallthrough");
2010-12-24 12:28:06 +08:00
assert((Cond.size() == 2 || Cond.size() == 0) &&
"PPC branch conditions have two components!");
2010-12-24 12:28:06 +08:00
bool isPPC64 = Subtarget.isPPC64();
// One-way branch.
if (!FBB) {
if (Cond.empty()) // Unconditional branch
BuildMI(&MBB, DL, get(PPC::B)).addMBB(TBB);
else if (Cond[1].getReg() == PPC::CTR || Cond[1].getReg() == PPC::CTR8)
BuildMI(&MBB, DL, get(Cond[0].getImm() ?
(isPPC64 ? PPC::BDNZ8 : PPC::BDNZ) :
(isPPC64 ? PPC::BDZ8 : PPC::BDZ))).addMBB(TBB);
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
else if (Cond[0].getImm() == PPC::PRED_BIT_SET)
BuildMI(&MBB, DL, get(PPC::BC)).addOperand(Cond[1]).addMBB(TBB);
else if (Cond[0].getImm() == PPC::PRED_BIT_UNSET)
BuildMI(&MBB, DL, get(PPC::BCn)).addOperand(Cond[1]).addMBB(TBB);
else // Conditional branch
BuildMI(&MBB, DL, get(PPC::BCC))
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
.addImm(Cond[0].getImm()).addOperand(Cond[1]).addMBB(TBB);
return 1;
}
2010-12-24 12:28:06 +08:00
// Two-way Conditional Branch.
if (Cond[1].getReg() == PPC::CTR || Cond[1].getReg() == PPC::CTR8)
BuildMI(&MBB, DL, get(Cond[0].getImm() ?
(isPPC64 ? PPC::BDNZ8 : PPC::BDNZ) :
(isPPC64 ? PPC::BDZ8 : PPC::BDZ))).addMBB(TBB);
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
else if (Cond[0].getImm() == PPC::PRED_BIT_SET)
BuildMI(&MBB, DL, get(PPC::BC)).addOperand(Cond[1]).addMBB(TBB);
else if (Cond[0].getImm() == PPC::PRED_BIT_UNSET)
BuildMI(&MBB, DL, get(PPC::BCn)).addOperand(Cond[1]).addMBB(TBB);
else
BuildMI(&MBB, DL, get(PPC::BCC))
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
.addImm(Cond[0].getImm()).addOperand(Cond[1]).addMBB(TBB);
BuildMI(&MBB, DL, get(PPC::B)).addMBB(FBB);
return 2;
}
// Select analysis.
bool PPCInstrInfo::canInsertSelect(const MachineBasicBlock &MBB,
const SmallVectorImpl<MachineOperand> &Cond,
unsigned TrueReg, unsigned FalseReg,
int &CondCycles, int &TrueCycles, int &FalseCycles) const {
if (!Subtarget.hasISEL())
return false;
if (Cond.size() != 2)
return false;
// If this is really a bdnz-like condition, then it cannot be turned into a
// select.
if (Cond[1].getReg() == PPC::CTR || Cond[1].getReg() == PPC::CTR8)
return false;
// Check register classes.
const MachineRegisterInfo &MRI = MBB.getParent()->getRegInfo();
const TargetRegisterClass *RC =
RI.getCommonSubClass(MRI.getRegClass(TrueReg), MRI.getRegClass(FalseReg));
if (!RC)
return false;
// isel is for regular integer GPRs only.
if (!PPC::GPRCRegClass.hasSubClassEq(RC) &&
!PPC::GPRC_NOR0RegClass.hasSubClassEq(RC) &&
!PPC::G8RCRegClass.hasSubClassEq(RC) &&
!PPC::G8RC_NOX0RegClass.hasSubClassEq(RC))
return false;
// FIXME: These numbers are for the A2, how well they work for other cores is
// an open question. On the A2, the isel instruction has a 2-cycle latency
// but single-cycle throughput. These numbers are used in combination with
// the MispredictPenalty setting from the active SchedMachineModel.
CondCycles = 1;
TrueCycles = 1;
FalseCycles = 1;
return true;
}
void PPCInstrInfo::insertSelect(MachineBasicBlock &MBB,
MachineBasicBlock::iterator MI, DebugLoc dl,
unsigned DestReg,
const SmallVectorImpl<MachineOperand> &Cond,
unsigned TrueReg, unsigned FalseReg) const {
assert(Cond.size() == 2 &&
"PPC branch conditions have two components!");
assert(Subtarget.hasISEL() &&
"Cannot insert select on target without ISEL support");
// Get the register classes.
MachineRegisterInfo &MRI = MBB.getParent()->getRegInfo();
const TargetRegisterClass *RC =
RI.getCommonSubClass(MRI.getRegClass(TrueReg), MRI.getRegClass(FalseReg));
assert(RC && "TrueReg and FalseReg must have overlapping register classes");
bool Is64Bit = PPC::G8RCRegClass.hasSubClassEq(RC) ||
PPC::G8RC_NOX0RegClass.hasSubClassEq(RC);
assert((Is64Bit ||
PPC::GPRCRegClass.hasSubClassEq(RC) ||
PPC::GPRC_NOR0RegClass.hasSubClassEq(RC)) &&
"isel is for regular integer GPRs only");
unsigned OpCode = Is64Bit ? PPC::ISEL8 : PPC::ISEL;
unsigned SelectPred = Cond[0].getImm();
unsigned SubIdx;
bool SwapOps;
switch (SelectPred) {
default: llvm_unreachable("invalid predicate for isel");
case PPC::PRED_EQ: SubIdx = PPC::sub_eq; SwapOps = false; break;
case PPC::PRED_NE: SubIdx = PPC::sub_eq; SwapOps = true; break;
case PPC::PRED_LT: SubIdx = PPC::sub_lt; SwapOps = false; break;
case PPC::PRED_GE: SubIdx = PPC::sub_lt; SwapOps = true; break;
case PPC::PRED_GT: SubIdx = PPC::sub_gt; SwapOps = false; break;
case PPC::PRED_LE: SubIdx = PPC::sub_gt; SwapOps = true; break;
case PPC::PRED_UN: SubIdx = PPC::sub_un; SwapOps = false; break;
case PPC::PRED_NU: SubIdx = PPC::sub_un; SwapOps = true; break;
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
case PPC::PRED_BIT_SET: SubIdx = 0; SwapOps = false; break;
case PPC::PRED_BIT_UNSET: SubIdx = 0; SwapOps = true; break;
}
unsigned FirstReg = SwapOps ? FalseReg : TrueReg,
SecondReg = SwapOps ? TrueReg : FalseReg;
// The first input register of isel cannot be r0. If it is a member
// of a register class that can be r0, then copy it first (the
// register allocator should eliminate the copy).
if (MRI.getRegClass(FirstReg)->contains(PPC::R0) ||
MRI.getRegClass(FirstReg)->contains(PPC::X0)) {
const TargetRegisterClass *FirstRC =
MRI.getRegClass(FirstReg)->contains(PPC::X0) ?
&PPC::G8RC_NOX0RegClass : &PPC::GPRC_NOR0RegClass;
unsigned OldFirstReg = FirstReg;
FirstReg = MRI.createVirtualRegister(FirstRC);
BuildMI(MBB, MI, dl, get(TargetOpcode::COPY), FirstReg)
.addReg(OldFirstReg);
}
BuildMI(MBB, MI, dl, get(OpCode), DestReg)
.addReg(FirstReg).addReg(SecondReg)
.addReg(Cond[1].getReg(), 0, SubIdx);
}
void PPCInstrInfo::copyPhysReg(MachineBasicBlock &MBB,
MachineBasicBlock::iterator I, DebugLoc DL,
unsigned DestReg, unsigned SrcReg,
bool KillSrc) const {
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
// We can end up with self copies and similar things as a result of VSX copy
// legalization. Promote them here.
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
const TargetRegisterInfo *TRI = &getRegisterInfo();
if (PPC::F8RCRegClass.contains(DestReg) &&
PPC::VSLRCRegClass.contains(SrcReg)) {
unsigned SuperReg =
TRI->getMatchingSuperReg(DestReg, PPC::sub_64, &PPC::VSRCRegClass);
if (VSXSelfCopyCrash && SrcReg == SuperReg)
llvm_unreachable("nop VSX copy");
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
DestReg = SuperReg;
} else if (PPC::VRRCRegClass.contains(DestReg) &&
PPC::VSHRCRegClass.contains(SrcReg)) {
unsigned SuperReg =
TRI->getMatchingSuperReg(DestReg, PPC::sub_128, &PPC::VSRCRegClass);
if (VSXSelfCopyCrash && SrcReg == SuperReg)
llvm_unreachable("nop VSX copy");
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
DestReg = SuperReg;
} else if (PPC::F8RCRegClass.contains(SrcReg) &&
PPC::VSLRCRegClass.contains(DestReg)) {
unsigned SuperReg =
TRI->getMatchingSuperReg(SrcReg, PPC::sub_64, &PPC::VSRCRegClass);
if (VSXSelfCopyCrash && DestReg == SuperReg)
llvm_unreachable("nop VSX copy");
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
SrcReg = SuperReg;
} else if (PPC::VRRCRegClass.contains(SrcReg) &&
PPC::VSHRCRegClass.contains(DestReg)) {
unsigned SuperReg =
TRI->getMatchingSuperReg(SrcReg, PPC::sub_128, &PPC::VSRCRegClass);
if (VSXSelfCopyCrash && DestReg == SuperReg)
llvm_unreachable("nop VSX copy");
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
SrcReg = SuperReg;
}
unsigned Opc;
if (PPC::GPRCRegClass.contains(DestReg, SrcReg))
Opc = PPC::OR;
else if (PPC::G8RCRegClass.contains(DestReg, SrcReg))
Opc = PPC::OR8;
else if (PPC::F4RCRegClass.contains(DestReg, SrcReg))
Opc = PPC::FMR;
else if (PPC::CRRCRegClass.contains(DestReg, SrcReg))
Opc = PPC::MCRF;
else if (PPC::VRRCRegClass.contains(DestReg, SrcReg))
Opc = PPC::VOR;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
else if (PPC::VSRCRegClass.contains(DestReg, SrcReg))
[PowerPC] Update comment re: VSX copy-instruction selection I've done some experimentation with this, and it looks like using the lower-latency (but lower throughput) copy instruction is essentially always the right thing to do. My assumption is that, in order to be relatively sure that the higher-latency copy will increase throughput, we'd want to have it unlikely to be in-flight with its use. On the P7, the global completion table (GCT) can hold a maximum of 120 instructions, shared among all active threads (up to 4), giving 30 instructions per thread. So specifically, I'd require at least that many instructions between the copy and the use before the high-latency variant is used. Trying this, however, over the entire test suite resulted in zero cases where the high-latency form would be preferable. This may be a consequence of the fact that the scheduler views copies as free, and so they tend to end up close to their uses. For this experiment I created a function: unsigned chooseVSXCopy(MachineBasicBlock &MBB, MachineBasicBlock::iterator I, unsigned DestReg, unsigned SrcReg, unsigned StartDist = 1, unsigned Depth = 3) const; with an implementation like: if (!Depth) return PPC::XXLOR; const unsigned MaxDist = 30; unsigned Dist = StartDist; for (auto J = I, JE = MBB.end(); J != JE && Dist <= MaxDist; ++J) { if (J->isTransient() && !J->isCopy()) continue; if (J->isCall() || J->isReturn() || J->readsRegister(DestReg, TRI)) return PPC::XXLOR; ++Dist; } // We've exceeded the required distance for the high-latency form, use it. if (Dist > MaxDist) return PPC::XVCPSGNDP; // If this is only an exit block, use the low-latency form. if (MBB.succ_empty()) return PPC::XXLOR; // We've reached the end of the block, check the successor blocks (up to some // depth), and use the high-latency form if that is okay with all successors. for (auto J = MBB.succ_begin(), JE = MBB.succ_end(); J != JE; ++J) { if (chooseVSXCopy(**J, (*J)->begin(), DestReg, SrcReg, Dist, --Depth) == PPC::XXLOR) return PPC::XXLOR; } // All of our successor blocks seem okay with the high-latency variant, so // we'll use it. return PPC::XVCPSGNDP; and then changed the copy opcode selection from: Opc = PPC::XXLOR; to: Opc = chooseVSXCopy(MBB, std::next(I), DestReg, SrcReg); In conclusion, I'm removing the FIXME from the comment, because I believe that there is, at least absent other examples, nothing to fix. llvm-svn: 204591
2014-03-24 17:36:36 +08:00
// There are two different ways this can be done:
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
// 1. xxlor : This has lower latency (on the P7), 2 cycles, but can only
// issue in VSU pipeline 0.
// 2. xmovdp/xmovsp: This has higher latency (on the P7), 6 cycles, but
// can go to either pipeline.
[PowerPC] Update comment re: VSX copy-instruction selection I've done some experimentation with this, and it looks like using the lower-latency (but lower throughput) copy instruction is essentially always the right thing to do. My assumption is that, in order to be relatively sure that the higher-latency copy will increase throughput, we'd want to have it unlikely to be in-flight with its use. On the P7, the global completion table (GCT) can hold a maximum of 120 instructions, shared among all active threads (up to 4), giving 30 instructions per thread. So specifically, I'd require at least that many instructions between the copy and the use before the high-latency variant is used. Trying this, however, over the entire test suite resulted in zero cases where the high-latency form would be preferable. This may be a consequence of the fact that the scheduler views copies as free, and so they tend to end up close to their uses. For this experiment I created a function: unsigned chooseVSXCopy(MachineBasicBlock &MBB, MachineBasicBlock::iterator I, unsigned DestReg, unsigned SrcReg, unsigned StartDist = 1, unsigned Depth = 3) const; with an implementation like: if (!Depth) return PPC::XXLOR; const unsigned MaxDist = 30; unsigned Dist = StartDist; for (auto J = I, JE = MBB.end(); J != JE && Dist <= MaxDist; ++J) { if (J->isTransient() && !J->isCopy()) continue; if (J->isCall() || J->isReturn() || J->readsRegister(DestReg, TRI)) return PPC::XXLOR; ++Dist; } // We've exceeded the required distance for the high-latency form, use it. if (Dist > MaxDist) return PPC::XVCPSGNDP; // If this is only an exit block, use the low-latency form. if (MBB.succ_empty()) return PPC::XXLOR; // We've reached the end of the block, check the successor blocks (up to some // depth), and use the high-latency form if that is okay with all successors. for (auto J = MBB.succ_begin(), JE = MBB.succ_end(); J != JE; ++J) { if (chooseVSXCopy(**J, (*J)->begin(), DestReg, SrcReg, Dist, --Depth) == PPC::XXLOR) return PPC::XXLOR; } // All of our successor blocks seem okay with the high-latency variant, so // we'll use it. return PPC::XVCPSGNDP; and then changed the copy opcode selection from: Opc = PPC::XXLOR; to: Opc = chooseVSXCopy(MBB, std::next(I), DestReg, SrcReg); In conclusion, I'm removing the FIXME from the comment, because I believe that there is, at least absent other examples, nothing to fix. llvm-svn: 204591
2014-03-24 17:36:36 +08:00
// We'll always use xxlor here, because in practically all cases where
// copies are generated, they are close enough to some use that the
// lower-latency form is preferable.
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
Opc = PPC::XXLOR;
else if (PPC::VSFRCRegClass.contains(DestReg, SrcReg))
Opc = PPC::XXLORf;
else if (PPC::CRBITRCRegClass.contains(DestReg, SrcReg))
Opc = PPC::CROR;
else
llvm_unreachable("Impossible reg-to-reg copy");
const MCInstrDesc &MCID = get(Opc);
if (MCID.getNumOperands() == 3)
BuildMI(MBB, I, DL, MCID, DestReg)
.addReg(SrcReg).addReg(SrcReg, getKillRegState(KillSrc));
else
BuildMI(MBB, I, DL, MCID, DestReg).addReg(SrcReg, getKillRegState(KillSrc));
}
// This function returns true if a CR spill is necessary and false otherwise.
bool
PPCInstrInfo::StoreRegToStackSlot(MachineFunction &MF,
unsigned SrcReg, bool isKill,
int FrameIdx,
const TargetRegisterClass *RC,
SmallVectorImpl<MachineInstr*> &NewMIs,
bool &NonRI, bool &SpillsVRS) const{
// Note: If additional store instructions are added here,
// update isStoreToStackSlot.
DebugLoc DL;
if (PPC::GPRCRegClass.hasSubClassEq(RC) ||
PPC::GPRC_NOR0RegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::STW))
.addReg(SrcReg,
getKillRegState(isKill)),
FrameIdx));
} else if (PPC::G8RCRegClass.hasSubClassEq(RC) ||
PPC::G8RC_NOX0RegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::STD))
.addReg(SrcReg,
getKillRegState(isKill)),
FrameIdx));
} else if (PPC::F8RCRegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::STFD))
.addReg(SrcReg,
getKillRegState(isKill)),
FrameIdx));
} else if (PPC::F4RCRegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::STFS))
.addReg(SrcReg,
getKillRegState(isKill)),
FrameIdx));
} else if (PPC::CRRCRegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::SPILL_CR))
.addReg(SrcReg,
getKillRegState(isKill)),
FrameIdx));
return true;
} else if (PPC::CRBITRCRegClass.hasSubClassEq(RC)) {
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::SPILL_CRBIT))
.addReg(SrcReg,
getKillRegState(isKill)),
FrameIdx));
return true;
} else if (PPC::VRRCRegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::STVX))
.addReg(SrcReg,
getKillRegState(isKill)),
FrameIdx));
NonRI = true;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
} else if (PPC::VSRCRegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::STXVD2X))
.addReg(SrcReg,
getKillRegState(isKill)),
FrameIdx));
NonRI = true;
} else if (PPC::VSFRCRegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::STXSDX))
.addReg(SrcReg,
getKillRegState(isKill)),
FrameIdx));
NonRI = true;
} else if (PPC::VRSAVERCRegClass.hasSubClassEq(RC)) {
assert(Subtarget.isDarwin() &&
"VRSAVE only needs spill/restore on Darwin");
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::SPILL_VRSAVE))
.addReg(SrcReg,
getKillRegState(isKill)),
FrameIdx));
SpillsVRS = true;
} else {
llvm_unreachable("Unknown regclass!");
}
return false;
}
void
PPCInstrInfo::storeRegToStackSlot(MachineBasicBlock &MBB,
MachineBasicBlock::iterator MI,
unsigned SrcReg, bool isKill, int FrameIdx,
const TargetRegisterClass *RC,
const TargetRegisterInfo *TRI) const {
MachineFunction &MF = *MBB.getParent();
SmallVector<MachineInstr*, 4> NewMIs;
PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>();
FuncInfo->setHasSpills();
bool NonRI = false, SpillsVRS = false;
if (StoreRegToStackSlot(MF, SrcReg, isKill, FrameIdx, RC, NewMIs,
NonRI, SpillsVRS))
FuncInfo->setSpillsCR();
if (SpillsVRS)
FuncInfo->setSpillsVRSAVE();
if (NonRI)
FuncInfo->setHasNonRISpills();
for (unsigned i = 0, e = NewMIs.size(); i != e; ++i)
MBB.insert(MI, NewMIs[i]);
const MachineFrameInfo &MFI = *MF.getFrameInfo();
MachineMemOperand *MMO =
MF.getMachineMemOperand(MachinePointerInfo::getFixedStack(FrameIdx),
MachineMemOperand::MOStore,
MFI.getObjectSize(FrameIdx),
MFI.getObjectAlignment(FrameIdx));
NewMIs.back()->addMemOperand(MF, MMO);
}
bool
PPCInstrInfo::LoadRegFromStackSlot(MachineFunction &MF, DebugLoc DL,
unsigned DestReg, int FrameIdx,
const TargetRegisterClass *RC,
SmallVectorImpl<MachineInstr*> &NewMIs,
bool &NonRI, bool &SpillsVRS) const{
// Note: If additional load instructions are added here,
// update isLoadFromStackSlot.
if (PPC::GPRCRegClass.hasSubClassEq(RC) ||
PPC::GPRC_NOR0RegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::LWZ),
DestReg), FrameIdx));
} else if (PPC::G8RCRegClass.hasSubClassEq(RC) ||
PPC::G8RC_NOX0RegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::LD), DestReg),
FrameIdx));
} else if (PPC::F8RCRegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::LFD), DestReg),
FrameIdx));
} else if (PPC::F4RCRegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::LFS), DestReg),
FrameIdx));
} else if (PPC::CRRCRegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL,
get(PPC::RESTORE_CR), DestReg),
FrameIdx));
return true;
} else if (PPC::CRBITRCRegClass.hasSubClassEq(RC)) {
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
NewMIs.push_back(addFrameReference(BuildMI(MF, DL,
get(PPC::RESTORE_CRBIT), DestReg),
FrameIdx));
return true;
} else if (PPC::VRRCRegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::LVX), DestReg),
FrameIdx));
NonRI = true;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
} else if (PPC::VSRCRegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::LXVD2X), DestReg),
FrameIdx));
NonRI = true;
} else if (PPC::VSFRCRegClass.hasSubClassEq(RC)) {
NewMIs.push_back(addFrameReference(BuildMI(MF, DL, get(PPC::LXSDX), DestReg),
FrameIdx));
NonRI = true;
} else if (PPC::VRSAVERCRegClass.hasSubClassEq(RC)) {
assert(Subtarget.isDarwin() &&
"VRSAVE only needs spill/restore on Darwin");
NewMIs.push_back(addFrameReference(BuildMI(MF, DL,
get(PPC::RESTORE_VRSAVE),
DestReg),
FrameIdx));
SpillsVRS = true;
} else {
llvm_unreachable("Unknown regclass!");
}
return false;
}
void
PPCInstrInfo::loadRegFromStackSlot(MachineBasicBlock &MBB,
MachineBasicBlock::iterator MI,
unsigned DestReg, int FrameIdx,
const TargetRegisterClass *RC,
const TargetRegisterInfo *TRI) const {
MachineFunction &MF = *MBB.getParent();
SmallVector<MachineInstr*, 4> NewMIs;
DebugLoc DL;
if (MI != MBB.end()) DL = MI->getDebugLoc();
PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>();
FuncInfo->setHasSpills();
bool NonRI = false, SpillsVRS = false;
if (LoadRegFromStackSlot(MF, DL, DestReg, FrameIdx, RC, NewMIs,
NonRI, SpillsVRS))
FuncInfo->setSpillsCR();
if (SpillsVRS)
FuncInfo->setSpillsVRSAVE();
if (NonRI)
FuncInfo->setHasNonRISpills();
for (unsigned i = 0, e = NewMIs.size(); i != e; ++i)
MBB.insert(MI, NewMIs[i]);
const MachineFrameInfo &MFI = *MF.getFrameInfo();
MachineMemOperand *MMO =
MF.getMachineMemOperand(MachinePointerInfo::getFixedStack(FrameIdx),
MachineMemOperand::MOLoad,
MFI.getObjectSize(FrameIdx),
MFI.getObjectAlignment(FrameIdx));
NewMIs.back()->addMemOperand(MF, MMO);
}
bool PPCInstrInfo::
ReverseBranchCondition(SmallVectorImpl<MachineOperand> &Cond) const {
assert(Cond.size() == 2 && "Invalid PPC branch opcode!");
if (Cond[1].getReg() == PPC::CTR8 || Cond[1].getReg() == PPC::CTR)
Cond[0].setImm(Cond[0].getImm() == 0 ? 1 : 0);
else
// Leave the CR# the same, but invert the condition.
Cond[0].setImm(PPC::InvertPredicate((PPC::Predicate)Cond[0].getImm()));
return false;
}
bool PPCInstrInfo::FoldImmediate(MachineInstr *UseMI, MachineInstr *DefMI,
unsigned Reg, MachineRegisterInfo *MRI) const {
// For some instructions, it is legal to fold ZERO into the RA register field.
// A zero immediate should always be loaded with a single li.
unsigned DefOpc = DefMI->getOpcode();
if (DefOpc != PPC::LI && DefOpc != PPC::LI8)
return false;
if (!DefMI->getOperand(1).isImm())
return false;
if (DefMI->getOperand(1).getImm() != 0)
return false;
// Note that we cannot here invert the arguments of an isel in order to fold
// a ZERO into what is presented as the second argument. All we have here
// is the condition bit, and that might come from a CR-logical bit operation.
const MCInstrDesc &UseMCID = UseMI->getDesc();
// Only fold into real machine instructions.
if (UseMCID.isPseudo())
return false;
unsigned UseIdx;
for (UseIdx = 0; UseIdx < UseMI->getNumOperands(); ++UseIdx)
if (UseMI->getOperand(UseIdx).isReg() &&
UseMI->getOperand(UseIdx).getReg() == Reg)
break;
assert(UseIdx < UseMI->getNumOperands() && "Cannot find Reg in UseMI");
assert(UseIdx < UseMCID.getNumOperands() && "No operand description for Reg");
const MCOperandInfo *UseInfo = &UseMCID.OpInfo[UseIdx];
// We can fold the zero if this register requires a GPRC_NOR0/G8RC_NOX0
// register (which might also be specified as a pointer class kind).
if (UseInfo->isLookupPtrRegClass()) {
if (UseInfo->RegClass /* Kind */ != 1)
return false;
} else {
if (UseInfo->RegClass != PPC::GPRC_NOR0RegClassID &&
UseInfo->RegClass != PPC::G8RC_NOX0RegClassID)
return false;
}
// Make sure this is not tied to an output register (or otherwise
// constrained). This is true for ST?UX registers, for example, which
// are tied to their output registers.
if (UseInfo->Constraints != 0)
return false;
unsigned ZeroReg;
if (UseInfo->isLookupPtrRegClass()) {
bool isPPC64 = Subtarget.isPPC64();
ZeroReg = isPPC64 ? PPC::ZERO8 : PPC::ZERO;
} else {
ZeroReg = UseInfo->RegClass == PPC::G8RC_NOX0RegClassID ?
PPC::ZERO8 : PPC::ZERO;
}
bool DeleteDef = MRI->hasOneNonDBGUse(Reg);
UseMI->getOperand(UseIdx).setReg(ZeroReg);
if (DeleteDef)
DefMI->eraseFromParent();
return true;
}
static bool MBBDefinesCTR(MachineBasicBlock &MBB) {
for (MachineBasicBlock::iterator I = MBB.begin(), IE = MBB.end();
I != IE; ++I)
if (I->definesRegister(PPC::CTR) || I->definesRegister(PPC::CTR8))
return true;
return false;
}
// We should make sure that, if we're going to predicate both sides of a
// condition (a diamond), that both sides don't define the counter register. We
// can predicate counter-decrement-based branches, but while that predicates
// the branching, it does not predicate the counter decrement. If we tried to
// merge the triangle into one predicated block, we'd decrement the counter
// twice.
bool PPCInstrInfo::isProfitableToIfCvt(MachineBasicBlock &TMBB,
unsigned NumT, unsigned ExtraT,
MachineBasicBlock &FMBB,
unsigned NumF, unsigned ExtraF,
const BranchProbability &Probability) const {
return !(MBBDefinesCTR(TMBB) && MBBDefinesCTR(FMBB));
}
bool PPCInstrInfo::isPredicated(const MachineInstr *MI) const {
// The predicated branches are identified by their type, not really by the
// explicit presence of a predicate. Furthermore, some of them can be
// predicated more than once. Because if conversion won't try to predicate
// any instruction which already claims to be predicated (by returning true
// here), always return false. In doing so, we let isPredicable() be the
// final word on whether not the instruction can be (further) predicated.
return false;
}
bool PPCInstrInfo::isUnpredicatedTerminator(const MachineInstr *MI) const {
if (!MI->isTerminator())
return false;
// Conditional branch is a special case.
if (MI->isBranch() && !MI->isBarrier())
return true;
return !isPredicated(MI);
}
bool PPCInstrInfo::PredicateInstruction(
MachineInstr *MI,
const SmallVectorImpl<MachineOperand> &Pred) const {
unsigned OpC = MI->getOpcode();
if (OpC == PPC::BLR) {
if (Pred[1].getReg() == PPC::CTR8 || Pred[1].getReg() == PPC::CTR) {
bool isPPC64 = Subtarget.isPPC64();
MI->setDesc(get(Pred[0].getImm() ?
(isPPC64 ? PPC::BDNZLR8 : PPC::BDNZLR) :
(isPPC64 ? PPC::BDZLR8 : PPC::BDZLR)));
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
} else if (Pred[0].getImm() == PPC::PRED_BIT_SET) {
MI->setDesc(get(PPC::BCLR));
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
MachineInstrBuilder(*MI->getParent()->getParent(), MI)
.addReg(Pred[1].getReg());
} else if (Pred[0].getImm() == PPC::PRED_BIT_UNSET) {
MI->setDesc(get(PPC::BCLRn));
MachineInstrBuilder(*MI->getParent()->getParent(), MI)
.addReg(Pred[1].getReg());
} else {
MI->setDesc(get(PPC::BCCLR));
MachineInstrBuilder(*MI->getParent()->getParent(), MI)
.addImm(Pred[0].getImm())
.addReg(Pred[1].getReg());
}
return true;
} else if (OpC == PPC::B) {
if (Pred[1].getReg() == PPC::CTR8 || Pred[1].getReg() == PPC::CTR) {
bool isPPC64 = Subtarget.isPPC64();
MI->setDesc(get(Pred[0].getImm() ?
(isPPC64 ? PPC::BDNZ8 : PPC::BDNZ) :
(isPPC64 ? PPC::BDZ8 : PPC::BDZ)));
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
} else if (Pred[0].getImm() == PPC::PRED_BIT_SET) {
MachineBasicBlock *MBB = MI->getOperand(0).getMBB();
MI->RemoveOperand(0);
MI->setDesc(get(PPC::BC));
MachineInstrBuilder(*MI->getParent()->getParent(), MI)
.addReg(Pred[1].getReg())
.addMBB(MBB);
} else if (Pred[0].getImm() == PPC::PRED_BIT_UNSET) {
MachineBasicBlock *MBB = MI->getOperand(0).getMBB();
MI->RemoveOperand(0);
MI->setDesc(get(PPC::BCn));
MachineInstrBuilder(*MI->getParent()->getParent(), MI)
.addReg(Pred[1].getReg())
.addMBB(MBB);
} else {
MachineBasicBlock *MBB = MI->getOperand(0).getMBB();
MI->RemoveOperand(0);
MI->setDesc(get(PPC::BCC));
MachineInstrBuilder(*MI->getParent()->getParent(), MI)
.addImm(Pred[0].getImm())
.addReg(Pred[1].getReg())
.addMBB(MBB);
}
return true;
} else if (OpC == PPC::BCTR || OpC == PPC::BCTR8 ||
OpC == PPC::BCTRL || OpC == PPC::BCTRL8) {
if (Pred[1].getReg() == PPC::CTR8 || Pred[1].getReg() == PPC::CTR)
llvm_unreachable("Cannot predicate bctr[l] on the ctr register");
bool setLR = OpC == PPC::BCTRL || OpC == PPC::BCTRL8;
bool isPPC64 = Subtarget.isPPC64();
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
if (Pred[0].getImm() == PPC::PRED_BIT_SET) {
MI->setDesc(get(isPPC64 ? (setLR ? PPC::BCCTRL8 : PPC::BCCTR8) :
(setLR ? PPC::BCCTRL : PPC::BCCTR)));
MachineInstrBuilder(*MI->getParent()->getParent(), MI)
.addReg(Pred[1].getReg());
return true;
} else if (Pred[0].getImm() == PPC::PRED_BIT_UNSET) {
MI->setDesc(get(isPPC64 ? (setLR ? PPC::BCCTRL8n : PPC::BCCTR8n) :
(setLR ? PPC::BCCTRLn : PPC::BCCTRn)));
MachineInstrBuilder(*MI->getParent()->getParent(), MI)
.addReg(Pred[1].getReg());
return true;
}
MI->setDesc(get(isPPC64 ? (setLR ? PPC::BCCCTRL8 : PPC::BCCCTR8) :
(setLR ? PPC::BCCCTRL : PPC::BCCCTR)));
MachineInstrBuilder(*MI->getParent()->getParent(), MI)
.addImm(Pred[0].getImm())
.addReg(Pred[1].getReg());
return true;
}
return false;
}
bool PPCInstrInfo::SubsumesPredicate(
const SmallVectorImpl<MachineOperand> &Pred1,
const SmallVectorImpl<MachineOperand> &Pred2) const {
assert(Pred1.size() == 2 && "Invalid PPC first predicate");
assert(Pred2.size() == 2 && "Invalid PPC second predicate");
if (Pred1[1].getReg() == PPC::CTR8 || Pred1[1].getReg() == PPC::CTR)
return false;
if (Pred2[1].getReg() == PPC::CTR8 || Pred2[1].getReg() == PPC::CTR)
return false;
// P1 can only subsume P2 if they test the same condition register.
if (Pred1[1].getReg() != Pred2[1].getReg())
return false;
PPC::Predicate P1 = (PPC::Predicate) Pred1[0].getImm();
PPC::Predicate P2 = (PPC::Predicate) Pred2[0].getImm();
if (P1 == P2)
return true;
// Does P1 subsume P2, e.g. GE subsumes GT.
if (P1 == PPC::PRED_LE &&
(P2 == PPC::PRED_LT || P2 == PPC::PRED_EQ))
return true;
if (P1 == PPC::PRED_GE &&
(P2 == PPC::PRED_GT || P2 == PPC::PRED_EQ))
return true;
return false;
}
bool PPCInstrInfo::DefinesPredicate(MachineInstr *MI,
std::vector<MachineOperand> &Pred) const {
// Note: At the present time, the contents of Pred from this function is
// unused by IfConversion. This implementation follows ARM by pushing the
// CR-defining operand. Because the 'DZ' and 'DNZ' count as types of
// predicate, instructions defining CTR or CTR8 are also included as
// predicate-defining instructions.
const TargetRegisterClass *RCs[] =
{ &PPC::CRRCRegClass, &PPC::CRBITRCRegClass,
&PPC::CTRRCRegClass, &PPC::CTRRC8RegClass };
bool Found = false;
for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
const MachineOperand &MO = MI->getOperand(i);
for (unsigned c = 0; c < array_lengthof(RCs) && !Found; ++c) {
const TargetRegisterClass *RC = RCs[c];
if (MO.isReg()) {
if (MO.isDef() && RC->contains(MO.getReg())) {
Pred.push_back(MO);
Found = true;
}
} else if (MO.isRegMask()) {
for (TargetRegisterClass::iterator I = RC->begin(),
IE = RC->end(); I != IE; ++I)
if (MO.clobbersPhysReg(*I)) {
Pred.push_back(MO);
Found = true;
}
}
}
}
return Found;
}
bool PPCInstrInfo::isPredicable(MachineInstr *MI) const {
unsigned OpC = MI->getOpcode();
switch (OpC) {
default:
return false;
case PPC::B:
case PPC::BLR:
case PPC::BCTR:
case PPC::BCTR8:
case PPC::BCTRL:
case PPC::BCTRL8:
return true;
}
}
bool PPCInstrInfo::analyzeCompare(const MachineInstr *MI,
unsigned &SrcReg, unsigned &SrcReg2,
int &Mask, int &Value) const {
unsigned Opc = MI->getOpcode();
switch (Opc) {
default: return false;
case PPC::CMPWI:
case PPC::CMPLWI:
case PPC::CMPDI:
case PPC::CMPLDI:
SrcReg = MI->getOperand(1).getReg();
SrcReg2 = 0;
Value = MI->getOperand(2).getImm();
Mask = 0xFFFF;
return true;
case PPC::CMPW:
case PPC::CMPLW:
case PPC::CMPD:
case PPC::CMPLD:
case PPC::FCMPUS:
case PPC::FCMPUD:
SrcReg = MI->getOperand(1).getReg();
SrcReg2 = MI->getOperand(2).getReg();
return true;
}
}
bool PPCInstrInfo::optimizeCompareInstr(MachineInstr *CmpInstr,
unsigned SrcReg, unsigned SrcReg2,
int Mask, int Value,
const MachineRegisterInfo *MRI) const {
if (DisableCmpOpt)
return false;
int OpC = CmpInstr->getOpcode();
unsigned CRReg = CmpInstr->getOperand(0).getReg();
// FP record forms set CR1 based on the execption status bits, not a
// comparison with zero.
if (OpC == PPC::FCMPUS || OpC == PPC::FCMPUD)
return false;
// The record forms set the condition register based on a signed comparison
// with zero (so says the ISA manual). This is not as straightforward as it
// seems, however, because this is always a 64-bit comparison on PPC64, even
// for instructions that are 32-bit in nature (like slw for example).
// So, on PPC32, for unsigned comparisons, we can use the record forms only
// for equality checks (as those don't depend on the sign). On PPC64,
// we are restricted to equality for unsigned 64-bit comparisons and for
// signed 32-bit comparisons the applicability is more restricted.
bool isPPC64 = Subtarget.isPPC64();
bool is32BitSignedCompare = OpC == PPC::CMPWI || OpC == PPC::CMPW;
bool is32BitUnsignedCompare = OpC == PPC::CMPLWI || OpC == PPC::CMPLW;
bool is64BitUnsignedCompare = OpC == PPC::CMPLDI || OpC == PPC::CMPLD;
// Get the unique definition of SrcReg.
MachineInstr *MI = MRI->getUniqueVRegDef(SrcReg);
if (!MI) return false;
int MIOpC = MI->getOpcode();
bool equalityOnly = false;
bool noSub = false;
if (isPPC64) {
if (is32BitSignedCompare) {
// We can perform this optimization only if MI is sign-extending.
if (MIOpC == PPC::SRAW || MIOpC == PPC::SRAWo ||
MIOpC == PPC::SRAWI || MIOpC == PPC::SRAWIo ||
MIOpC == PPC::EXTSB || MIOpC == PPC::EXTSBo ||
MIOpC == PPC::EXTSH || MIOpC == PPC::EXTSHo ||
MIOpC == PPC::EXTSW || MIOpC == PPC::EXTSWo) {
noSub = true;
} else
return false;
} else if (is32BitUnsignedCompare) {
// We can perform this optimization, equality only, if MI is
// zero-extending.
if (MIOpC == PPC::CNTLZW || MIOpC == PPC::CNTLZWo ||
MIOpC == PPC::SLW || MIOpC == PPC::SLWo ||
MIOpC == PPC::SRW || MIOpC == PPC::SRWo) {
noSub = true;
equalityOnly = true;
} else
return false;
} else
equalityOnly = is64BitUnsignedCompare;
} else
equalityOnly = is32BitUnsignedCompare;
if (equalityOnly) {
// We need to check the uses of the condition register in order to reject
// non-equality comparisons.
for (MachineRegisterInfo::use_instr_iterator I =MRI->use_instr_begin(CRReg),
IE = MRI->use_instr_end(); I != IE; ++I) {
MachineInstr *UseMI = &*I;
if (UseMI->getOpcode() == PPC::BCC) {
unsigned Pred = UseMI->getOperand(0).getImm();
if (Pred != PPC::PRED_EQ && Pred != PPC::PRED_NE)
return false;
} else if (UseMI->getOpcode() == PPC::ISEL ||
UseMI->getOpcode() == PPC::ISEL8) {
unsigned SubIdx = UseMI->getOperand(3).getSubReg();
if (SubIdx != PPC::sub_eq)
return false;
} else
return false;
}
}
MachineBasicBlock::iterator I = CmpInstr;
// Scan forward to find the first use of the compare.
for (MachineBasicBlock::iterator EL = CmpInstr->getParent()->end();
I != EL; ++I) {
bool FoundUse = false;
for (MachineRegisterInfo::use_instr_iterator J =MRI->use_instr_begin(CRReg),
JE = MRI->use_instr_end(); J != JE; ++J)
if (&*J == &*I) {
FoundUse = true;
break;
}
if (FoundUse)
break;
}
// There are two possible candidates which can be changed to set CR[01].
// One is MI, the other is a SUB instruction.
// For CMPrr(r1,r2), we are looking for SUB(r1,r2) or SUB(r2,r1).
MachineInstr *Sub = nullptr;
if (SrcReg2 != 0)
// MI is not a candidate for CMPrr.
MI = nullptr;
// FIXME: Conservatively refuse to convert an instruction which isn't in the
// same BB as the comparison. This is to allow the check below to avoid calls
// (and other explicit clobbers); instead we should really check for these
// more explicitly (in at least a few predecessors).
else if (MI->getParent() != CmpInstr->getParent() || Value != 0) {
// PPC does not have a record-form SUBri.
return false;
}
// Search for Sub.
const TargetRegisterInfo *TRI = &getRegisterInfo();
--I;
// Get ready to iterate backward from CmpInstr.
MachineBasicBlock::iterator E = MI,
B = CmpInstr->getParent()->begin();
for (; I != E && !noSub; --I) {
const MachineInstr &Instr = *I;
unsigned IOpC = Instr.getOpcode();
if (&*I != CmpInstr && (
Instr.modifiesRegister(PPC::CR0, TRI) ||
Instr.readsRegister(PPC::CR0, TRI)))
// This instruction modifies or uses the record condition register after
// the one we want to change. While we could do this transformation, it
// would likely not be profitable. This transformation removes one
// instruction, and so even forcing RA to generate one move probably
// makes it unprofitable.
return false;
// Check whether CmpInstr can be made redundant by the current instruction.
if ((OpC == PPC::CMPW || OpC == PPC::CMPLW ||
OpC == PPC::CMPD || OpC == PPC::CMPLD) &&
(IOpC == PPC::SUBF || IOpC == PPC::SUBF8) &&
((Instr.getOperand(1).getReg() == SrcReg &&
Instr.getOperand(2).getReg() == SrcReg2) ||
(Instr.getOperand(1).getReg() == SrcReg2 &&
Instr.getOperand(2).getReg() == SrcReg))) {
Sub = &*I;
break;
}
if (I == B)
// The 'and' is below the comparison instruction.
return false;
}
// Return false if no candidates exist.
if (!MI && !Sub)
return false;
// The single candidate is called MI.
if (!MI) MI = Sub;
int NewOpC = -1;
MIOpC = MI->getOpcode();
if (MIOpC == PPC::ANDIo || MIOpC == PPC::ANDIo8)
NewOpC = MIOpC;
else {
NewOpC = PPC::getRecordFormOpcode(MIOpC);
if (NewOpC == -1 && PPC::getNonRecordFormOpcode(MIOpC) != -1)
NewOpC = MIOpC;
}
// FIXME: On the non-embedded POWER architectures, only some of the record
// forms are fast, and we should use only the fast ones.
// The defining instruction has a record form (or is already a record
// form). It is possible, however, that we'll need to reverse the condition
// code of the users.
if (NewOpC == -1)
return false;
SmallVector<std::pair<MachineOperand*, PPC::Predicate>, 4> PredsToUpdate;
SmallVector<std::pair<MachineOperand*, unsigned>, 4> SubRegsToUpdate;
// If we have SUB(r1, r2) and CMP(r2, r1), the condition code based on CMP
// needs to be updated to be based on SUB. Push the condition code
// operands to OperandsToUpdate. If it is safe to remove CmpInstr, the
// condition code of these operands will be modified.
bool ShouldSwap = false;
if (Sub) {
ShouldSwap = SrcReg2 != 0 && Sub->getOperand(1).getReg() == SrcReg2 &&
Sub->getOperand(2).getReg() == SrcReg;
// The operands to subf are the opposite of sub, so only in the fixed-point
// case, invert the order.
ShouldSwap = !ShouldSwap;
}
if (ShouldSwap)
for (MachineRegisterInfo::use_instr_iterator
I = MRI->use_instr_begin(CRReg), IE = MRI->use_instr_end();
I != IE; ++I) {
MachineInstr *UseMI = &*I;
if (UseMI->getOpcode() == PPC::BCC) {
PPC::Predicate Pred = (PPC::Predicate) UseMI->getOperand(0).getImm();
assert((!equalityOnly ||
Pred == PPC::PRED_EQ || Pred == PPC::PRED_NE) &&
"Invalid predicate for equality-only optimization");
PredsToUpdate.push_back(std::make_pair(&(UseMI->getOperand(0)),
PPC::getSwappedPredicate(Pred)));
} else if (UseMI->getOpcode() == PPC::ISEL ||
UseMI->getOpcode() == PPC::ISEL8) {
unsigned NewSubReg = UseMI->getOperand(3).getSubReg();
assert((!equalityOnly || NewSubReg == PPC::sub_eq) &&
"Invalid CR bit for equality-only optimization");
if (NewSubReg == PPC::sub_lt)
NewSubReg = PPC::sub_gt;
else if (NewSubReg == PPC::sub_gt)
NewSubReg = PPC::sub_lt;
SubRegsToUpdate.push_back(std::make_pair(&(UseMI->getOperand(3)),
NewSubReg));
} else // We need to abort on a user we don't understand.
return false;
}
// Create a new virtual register to hold the value of the CR set by the
// record-form instruction. If the instruction was not previously in
// record form, then set the kill flag on the CR.
CmpInstr->eraseFromParent();
MachineBasicBlock::iterator MII = MI;
BuildMI(*MI->getParent(), std::next(MII), MI->getDebugLoc(),
get(TargetOpcode::COPY), CRReg)
.addReg(PPC::CR0, MIOpC != NewOpC ? RegState::Kill : 0);
if (MIOpC != NewOpC) {
// We need to be careful here: we're replacing one instruction with
// another, and we need to make sure that we get all of the right
// implicit uses and defs. On the other hand, the caller may be holding
// an iterator to this instruction, and so we can't delete it (this is
// specifically the case if this is the instruction directly after the
// compare).
const MCInstrDesc &NewDesc = get(NewOpC);
MI->setDesc(NewDesc);
if (NewDesc.ImplicitDefs)
for (const uint16_t *ImpDefs = NewDesc.getImplicitDefs();
*ImpDefs; ++ImpDefs)
if (!MI->definesRegister(*ImpDefs))
MI->addOperand(*MI->getParent()->getParent(),
MachineOperand::CreateReg(*ImpDefs, true, true));
if (NewDesc.ImplicitUses)
for (const uint16_t *ImpUses = NewDesc.getImplicitUses();
*ImpUses; ++ImpUses)
if (!MI->readsRegister(*ImpUses))
MI->addOperand(*MI->getParent()->getParent(),
MachineOperand::CreateReg(*ImpUses, false, true));
}
// Modify the condition code of operands in OperandsToUpdate.
// Since we have SUB(r1, r2) and CMP(r2, r1), the condition code needs to
// be changed from r2 > r1 to r1 < r2, from r2 < r1 to r1 > r2, etc.
for (unsigned i = 0, e = PredsToUpdate.size(); i < e; i++)
PredsToUpdate[i].first->setImm(PredsToUpdate[i].second);
for (unsigned i = 0, e = SubRegsToUpdate.size(); i < e; i++)
SubRegsToUpdate[i].first->setSubReg(SubRegsToUpdate[i].second);
return true;
}
/// GetInstSize - Return the number of bytes of code the specified
/// instruction may be. This returns the maximum number of bytes.
///
unsigned PPCInstrInfo::GetInstSizeInBytes(const MachineInstr *MI) const {
unsigned Opcode = MI->getOpcode();
if (Opcode == PPC::INLINEASM) {
const MachineFunction *MF = MI->getParent()->getParent();
const char *AsmStr = MI->getOperand(0).getSymbolName();
return getInlineAsmLength(AsmStr, *MF->getTarget().getMCAsmInfo());
} else {
const MCInstrDesc &Desc = get(Opcode);
return Desc.getSize();
}
}
[PowerPC] Select between VSX A-type and M-type FMA instructions just before RA The VSX instruction set has two types of FMA instructions: A-type (where the addend is taken from the output register) and M-type (where one of the product operands is taken from the output register). This adds a small pass that runs just after MI scheduling (and, thus, just before register allocation) that mutates A-type instructions (that are created during isel) into M-type instructions when: 1. This will eliminate an otherwise-necessary copy of the addend 2. One of the product operands is killed by the instruction The "right" moment to make this decision is in between scheduling and register allocation, because only there do we know whether or not one of the product operands is killed by any particular instruction. Unfortunately, this also makes the implementation somewhat complicated, because the MIs are not in SSA form and we need to preserve the LiveIntervals analysis. As a simple example, if we have: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 ... %vreg9<def,tied1> = XSMADDADP %vreg9<tied0>, %vreg17, %vreg19, %RM<imp-use>; VSLRC:%vreg9,%vreg17,%vreg19 ... We can eliminate the copy by changing from the A-type to the M-type instruction. This means: %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 is replaced by: %vreg16<def,tied1> = XSMADDMDP %vreg16<tied0>, %vreg18, %vreg9, %RM<imp-use>; VSLRC:%vreg16,%vreg18,%vreg9 and we remove: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 llvm-svn: 204768
2014-03-26 07:29:21 +08:00
#undef DEBUG_TYPE
#define DEBUG_TYPE "ppc-vsx-fma-mutate"
namespace {
// PPCVSXFMAMutate pass - For copies between VSX registers and non-VSX registers
// (Altivec and scalar floating-point registers), we need to transform the
// copies into subregister copies with other restrictions.
struct PPCVSXFMAMutate : public MachineFunctionPass {
static char ID;
PPCVSXFMAMutate() : MachineFunctionPass(ID) {
initializePPCVSXFMAMutatePass(*PassRegistry::getPassRegistry());
}
LiveIntervals *LIS;
const PPCTargetMachine *TM;
const PPCInstrInfo *TII;
protected:
bool processBlock(MachineBasicBlock &MBB) {
bool Changed = false;
MachineRegisterInfo &MRI = MBB.getParent()->getRegInfo();
for (MachineBasicBlock::iterator I = MBB.begin(), IE = MBB.end();
I != IE; ++I) {
MachineInstr *MI = I;
// The default (A-type) VSX FMA form kills the addend (it is taken from
// the target register, which is then updated to reflect the result of
// the FMA). If the instruction, however, kills one of the registers
// used for the product, then we can use the M-form instruction (which
// will take that value from the to-be-defined register).
int AltOpc = PPC::getAltVSXFMAOpcode(MI->getOpcode());
if (AltOpc == -1)
continue;
// This pass is run after register coalescing, and so we're looking for
// a situation like this:
// ...
// %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9
// %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16,
// %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16
// ...
// %vreg9<def,tied1> = XSMADDADP %vreg9<tied0>, %vreg17, %vreg19,
// %RM<imp-use>; VSLRC:%vreg9,%vreg17,%vreg19
// ...
// Where we can eliminate the copy by changing from the A-type to the
// M-type instruction. Specifically, for this example, this means:
// %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16,
// %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16
// is replaced by:
// %vreg16<def,tied1> = XSMADDMDP %vreg16<tied0>, %vreg18, %vreg9,
// %RM<imp-use>; VSLRC:%vreg16,%vreg18,%vreg9
// and we remove: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9
SlotIndex FMAIdx = LIS->getInstructionIndex(MI);
VNInfo *AddendValNo =
LIS->getInterval(MI->getOperand(1).getReg()).Query(FMAIdx).valueIn();
MachineInstr *AddendMI = LIS->getInstructionFromIndex(AddendValNo->def);
// The addend and this instruction must be in the same block.
if (!AddendMI || AddendMI->getParent() != MI->getParent())
[PowerPC] Select between VSX A-type and M-type FMA instructions just before RA The VSX instruction set has two types of FMA instructions: A-type (where the addend is taken from the output register) and M-type (where one of the product operands is taken from the output register). This adds a small pass that runs just after MI scheduling (and, thus, just before register allocation) that mutates A-type instructions (that are created during isel) into M-type instructions when: 1. This will eliminate an otherwise-necessary copy of the addend 2. One of the product operands is killed by the instruction The "right" moment to make this decision is in between scheduling and register allocation, because only there do we know whether or not one of the product operands is killed by any particular instruction. Unfortunately, this also makes the implementation somewhat complicated, because the MIs are not in SSA form and we need to preserve the LiveIntervals analysis. As a simple example, if we have: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 ... %vreg9<def,tied1> = XSMADDADP %vreg9<tied0>, %vreg17, %vreg19, %RM<imp-use>; VSLRC:%vreg9,%vreg17,%vreg19 ... We can eliminate the copy by changing from the A-type to the M-type instruction. This means: %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 is replaced by: %vreg16<def,tied1> = XSMADDMDP %vreg16<tied0>, %vreg18, %vreg9, %RM<imp-use>; VSLRC:%vreg16,%vreg18,%vreg9 and we remove: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 llvm-svn: 204768
2014-03-26 07:29:21 +08:00
continue;
// The addend must be a full copy within the same register class.
if (!AddendMI->isFullCopy())
continue;
unsigned AddendSrcReg = AddendMI->getOperand(1).getReg();
if (TargetRegisterInfo::isVirtualRegister(AddendSrcReg)) {
if (MRI.getRegClass(AddendMI->getOperand(0).getReg()) !=
MRI.getRegClass(AddendSrcReg))
continue;
} else {
// If AddendSrcReg is a physical register, make sure the destination
// register class contains it.
if (!MRI.getRegClass(AddendMI->getOperand(0).getReg())
->contains(AddendSrcReg))
continue;
}
[PowerPC] Select between VSX A-type and M-type FMA instructions just before RA The VSX instruction set has two types of FMA instructions: A-type (where the addend is taken from the output register) and M-type (where one of the product operands is taken from the output register). This adds a small pass that runs just after MI scheduling (and, thus, just before register allocation) that mutates A-type instructions (that are created during isel) into M-type instructions when: 1. This will eliminate an otherwise-necessary copy of the addend 2. One of the product operands is killed by the instruction The "right" moment to make this decision is in between scheduling and register allocation, because only there do we know whether or not one of the product operands is killed by any particular instruction. Unfortunately, this also makes the implementation somewhat complicated, because the MIs are not in SSA form and we need to preserve the LiveIntervals analysis. As a simple example, if we have: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 ... %vreg9<def,tied1> = XSMADDADP %vreg9<tied0>, %vreg17, %vreg19, %RM<imp-use>; VSLRC:%vreg9,%vreg17,%vreg19 ... We can eliminate the copy by changing from the A-type to the M-type instruction. This means: %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 is replaced by: %vreg16<def,tied1> = XSMADDMDP %vreg16<tied0>, %vreg18, %vreg9, %RM<imp-use>; VSLRC:%vreg16,%vreg18,%vreg9 and we remove: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 llvm-svn: 204768
2014-03-26 07:29:21 +08:00
// In theory, there could be other uses of the addend copy before this
// fma. We could deal with this, but that would require additional
// logic below and I suspect it will not occur in any relevant
// situations.
bool OtherUsers = false;
for (auto J = std::prev(I), JE = MachineBasicBlock::iterator(AddendMI);
J != JE; --J)
if (J->readsVirtualRegister(AddendMI->getOperand(0).getReg())) {
OtherUsers = true;
break;
}
if (OtherUsers)
continue;
// Find one of the product operands that is killed by this instruction.
unsigned KilledProdOp = 0, OtherProdOp = 0;
if (LIS->getInterval(MI->getOperand(2).getReg())
.Query(FMAIdx).isKill()) {
KilledProdOp = 2;
OtherProdOp = 3;
} else if (LIS->getInterval(MI->getOperand(3).getReg())
.Query(FMAIdx).isKill()) {
KilledProdOp = 3;
OtherProdOp = 2;
}
// If there are no killed product operands, then this transformation is
// likely not profitable.
[PowerPC] Select between VSX A-type and M-type FMA instructions just before RA The VSX instruction set has two types of FMA instructions: A-type (where the addend is taken from the output register) and M-type (where one of the product operands is taken from the output register). This adds a small pass that runs just after MI scheduling (and, thus, just before register allocation) that mutates A-type instructions (that are created during isel) into M-type instructions when: 1. This will eliminate an otherwise-necessary copy of the addend 2. One of the product operands is killed by the instruction The "right" moment to make this decision is in between scheduling and register allocation, because only there do we know whether or not one of the product operands is killed by any particular instruction. Unfortunately, this also makes the implementation somewhat complicated, because the MIs are not in SSA form and we need to preserve the LiveIntervals analysis. As a simple example, if we have: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 ... %vreg9<def,tied1> = XSMADDADP %vreg9<tied0>, %vreg17, %vreg19, %RM<imp-use>; VSLRC:%vreg9,%vreg17,%vreg19 ... We can eliminate the copy by changing from the A-type to the M-type instruction. This means: %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 is replaced by: %vreg16<def,tied1> = XSMADDMDP %vreg16<tied0>, %vreg18, %vreg9, %RM<imp-use>; VSLRC:%vreg16,%vreg18,%vreg9 and we remove: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 llvm-svn: 204768
2014-03-26 07:29:21 +08:00
if (!KilledProdOp)
continue;
// In order to replace the addend here with the source of the copy,
// it must still be live here.
if (!LIS->getInterval(AddendMI->getOperand(1).getReg()).liveAt(FMAIdx))
continue;
// Transform: (O2 * O3) + O1 -> (O2 * O1) + O3.
unsigned AddReg = AddendMI->getOperand(1).getReg();
unsigned KilledProdReg = MI->getOperand(KilledProdOp).getReg();
unsigned OtherProdReg = MI->getOperand(OtherProdOp).getReg();
unsigned AddSubReg = AddendMI->getOperand(1).getSubReg();
unsigned KilledProdSubReg = MI->getOperand(KilledProdOp).getSubReg();
unsigned OtherProdSubReg = MI->getOperand(OtherProdOp).getSubReg();
bool AddRegKill = AddendMI->getOperand(1).isKill();
bool KilledProdRegKill = MI->getOperand(KilledProdOp).isKill();
bool OtherProdRegKill = MI->getOperand(OtherProdOp).isKill();
bool AddRegUndef = AddendMI->getOperand(1).isUndef();
bool KilledProdRegUndef = MI->getOperand(KilledProdOp).isUndef();
bool OtherProdRegUndef = MI->getOperand(OtherProdOp).isUndef();
unsigned OldFMAReg = MI->getOperand(0).getReg();
assert(OldFMAReg == AddendMI->getOperand(0).getReg() &&
"Addend copy not tied to old FMA output!");
DEBUG(dbgs() << "VSX FMA Mutation:\n " << *MI;);
MI->getOperand(0).setReg(KilledProdReg);
MI->getOperand(1).setReg(KilledProdReg);
MI->getOperand(3).setReg(AddReg);
MI->getOperand(2).setReg(OtherProdReg);
MI->getOperand(0).setSubReg(KilledProdSubReg);
MI->getOperand(1).setSubReg(KilledProdSubReg);
MI->getOperand(3).setSubReg(AddSubReg);
MI->getOperand(2).setSubReg(OtherProdSubReg);
MI->getOperand(1).setIsKill(KilledProdRegKill);
MI->getOperand(3).setIsKill(AddRegKill);
MI->getOperand(2).setIsKill(OtherProdRegKill);
MI->getOperand(1).setIsUndef(KilledProdRegUndef);
MI->getOperand(3).setIsUndef(AddRegUndef);
MI->getOperand(2).setIsUndef(OtherProdRegUndef);
MI->setDesc(TII->get(AltOpc));
DEBUG(dbgs() << " -> " << *MI);
// The killed product operand was killed here, so we can reuse it now
// for the result of the fma.
LiveInterval &FMAInt = LIS->getInterval(OldFMAReg);
VNInfo *FMAValNo = FMAInt.getVNInfoAt(FMAIdx.getRegSlot());
for (auto UI = MRI.reg_nodbg_begin(OldFMAReg), UE = MRI.reg_nodbg_end();
UI != UE;) {
MachineOperand &UseMO = *UI;
MachineInstr *UseMI = UseMO.getParent();
++UI;
// Don't replace the result register of the copy we're about to erase.
if (UseMI == AddendMI)
continue;
UseMO.setReg(KilledProdReg);
UseMO.setSubReg(KilledProdSubReg);
}
// Extend the live intervals of the killed product operand to hold the
// fma result.
LiveInterval &NewFMAInt = LIS->getInterval(KilledProdReg);
for (LiveInterval::iterator AI = FMAInt.begin(), AE = FMAInt.end();
AI != AE; ++AI) {
// Don't add the segment that corresponds to the original copy.
if (AI->valno == AddendValNo)
continue;
VNInfo *NewFMAValNo =
NewFMAInt.getNextValue(AI->start,
LIS->getVNInfoAllocator());
NewFMAInt.addSegment(LiveInterval::Segment(AI->start, AI->end,
NewFMAValNo));
}
DEBUG(dbgs() << " extended: " << NewFMAInt << '\n');
FMAInt.removeValNo(FMAValNo);
DEBUG(dbgs() << " trimmed: " << FMAInt << '\n');
// Remove the (now unused) copy.
DEBUG(dbgs() << " removing: " << *AddendMI << '\n');
LIS->RemoveMachineInstrFromMaps(AddendMI);
AddendMI->eraseFromParent();
Changed = true;
}
return Changed;
}
public:
bool runOnMachineFunction(MachineFunction &MF) override {
TM = static_cast<const PPCTargetMachine *>(&MF.getTarget());
// If we don't have VSX then go ahead and return without doing
// anything.
if (!TM->getSubtargetImpl()->hasVSX())
return false;
[PowerPC] Select between VSX A-type and M-type FMA instructions just before RA The VSX instruction set has two types of FMA instructions: A-type (where the addend is taken from the output register) and M-type (where one of the product operands is taken from the output register). This adds a small pass that runs just after MI scheduling (and, thus, just before register allocation) that mutates A-type instructions (that are created during isel) into M-type instructions when: 1. This will eliminate an otherwise-necessary copy of the addend 2. One of the product operands is killed by the instruction The "right" moment to make this decision is in between scheduling and register allocation, because only there do we know whether or not one of the product operands is killed by any particular instruction. Unfortunately, this also makes the implementation somewhat complicated, because the MIs are not in SSA form and we need to preserve the LiveIntervals analysis. As a simple example, if we have: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 ... %vreg9<def,tied1> = XSMADDADP %vreg9<tied0>, %vreg17, %vreg19, %RM<imp-use>; VSLRC:%vreg9,%vreg17,%vreg19 ... We can eliminate the copy by changing from the A-type to the M-type instruction. This means: %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 is replaced by: %vreg16<def,tied1> = XSMADDMDP %vreg16<tied0>, %vreg18, %vreg9, %RM<imp-use>; VSLRC:%vreg16,%vreg18,%vreg9 and we remove: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 llvm-svn: 204768
2014-03-26 07:29:21 +08:00
LIS = &getAnalysis<LiveIntervals>();
TII = TM->getSubtargetImpl()->getInstrInfo();
[PowerPC] Select between VSX A-type and M-type FMA instructions just before RA The VSX instruction set has two types of FMA instructions: A-type (where the addend is taken from the output register) and M-type (where one of the product operands is taken from the output register). This adds a small pass that runs just after MI scheduling (and, thus, just before register allocation) that mutates A-type instructions (that are created during isel) into M-type instructions when: 1. This will eliminate an otherwise-necessary copy of the addend 2. One of the product operands is killed by the instruction The "right" moment to make this decision is in between scheduling and register allocation, because only there do we know whether or not one of the product operands is killed by any particular instruction. Unfortunately, this also makes the implementation somewhat complicated, because the MIs are not in SSA form and we need to preserve the LiveIntervals analysis. As a simple example, if we have: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 ... %vreg9<def,tied1> = XSMADDADP %vreg9<tied0>, %vreg17, %vreg19, %RM<imp-use>; VSLRC:%vreg9,%vreg17,%vreg19 ... We can eliminate the copy by changing from the A-type to the M-type instruction. This means: %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 is replaced by: %vreg16<def,tied1> = XSMADDMDP %vreg16<tied0>, %vreg18, %vreg9, %RM<imp-use>; VSLRC:%vreg16,%vreg18,%vreg9 and we remove: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 llvm-svn: 204768
2014-03-26 07:29:21 +08:00
bool Changed = false;
if (DisableVSXFMAMutate)
return Changed;
for (MachineFunction::iterator I = MF.begin(); I != MF.end();) {
MachineBasicBlock &B = *I++;
if (processBlock(B))
Changed = true;
}
return Changed;
}
void getAnalysisUsage(AnalysisUsage &AU) const override {
[PowerPC] Select between VSX A-type and M-type FMA instructions just before RA The VSX instruction set has two types of FMA instructions: A-type (where the addend is taken from the output register) and M-type (where one of the product operands is taken from the output register). This adds a small pass that runs just after MI scheduling (and, thus, just before register allocation) that mutates A-type instructions (that are created during isel) into M-type instructions when: 1. This will eliminate an otherwise-necessary copy of the addend 2. One of the product operands is killed by the instruction The "right" moment to make this decision is in between scheduling and register allocation, because only there do we know whether or not one of the product operands is killed by any particular instruction. Unfortunately, this also makes the implementation somewhat complicated, because the MIs are not in SSA form and we need to preserve the LiveIntervals analysis. As a simple example, if we have: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 ... %vreg9<def,tied1> = XSMADDADP %vreg9<tied0>, %vreg17, %vreg19, %RM<imp-use>; VSLRC:%vreg9,%vreg17,%vreg19 ... We can eliminate the copy by changing from the A-type to the M-type instruction. This means: %vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16, %RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16 is replaced by: %vreg16<def,tied1> = XSMADDMDP %vreg16<tied0>, %vreg18, %vreg9, %RM<imp-use>; VSLRC:%vreg16,%vreg18,%vreg9 and we remove: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9 llvm-svn: 204768
2014-03-26 07:29:21 +08:00
AU.addRequired<LiveIntervals>();
AU.addPreserved<LiveIntervals>();
AU.addRequired<SlotIndexes>();
AU.addPreserved<SlotIndexes>();
MachineFunctionPass::getAnalysisUsage(AU);
}
};
}
INITIALIZE_PASS_BEGIN(PPCVSXFMAMutate, DEBUG_TYPE,
"PowerPC VSX FMA Mutation", false, false)
INITIALIZE_PASS_DEPENDENCY(LiveIntervals)
INITIALIZE_PASS_DEPENDENCY(SlotIndexes)
INITIALIZE_PASS_END(PPCVSXFMAMutate, DEBUG_TYPE,
"PowerPC VSX FMA Mutation", false, false)
char &llvm::PPCVSXFMAMutateID = PPCVSXFMAMutate::ID;
char PPCVSXFMAMutate::ID = 0;
FunctionPass*
llvm::createPPCVSXFMAMutatePass() { return new PPCVSXFMAMutate(); }
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
#undef DEBUG_TYPE
#define DEBUG_TYPE "ppc-vsx-copy"
namespace llvm {
void initializePPCVSXCopyPass(PassRegistry&);
}
namespace {
// PPCVSXCopy pass - For copies between VSX registers and non-VSX registers
// (Altivec and scalar floating-point registers), we need to transform the
// copies into subregister copies with other restrictions.
struct PPCVSXCopy : public MachineFunctionPass {
static char ID;
PPCVSXCopy() : MachineFunctionPass(ID) {
initializePPCVSXCopyPass(*PassRegistry::getPassRegistry());
}
const PPCTargetMachine *TM;
const PPCInstrInfo *TII;
bool IsRegInClass(unsigned Reg, const TargetRegisterClass *RC,
MachineRegisterInfo &MRI) {
if (TargetRegisterInfo::isVirtualRegister(Reg)) {
return RC->hasSubClassEq(MRI.getRegClass(Reg));
} else if (RC->contains(Reg)) {
return true;
}
return false;
}
bool IsVSReg(unsigned Reg, MachineRegisterInfo &MRI) {
return IsRegInClass(Reg, &PPC::VSRCRegClass, MRI);
}
bool IsVRReg(unsigned Reg, MachineRegisterInfo &MRI) {
return IsRegInClass(Reg, &PPC::VRRCRegClass, MRI);
}
bool IsF8Reg(unsigned Reg, MachineRegisterInfo &MRI) {
return IsRegInClass(Reg, &PPC::F8RCRegClass, MRI);
}
protected:
bool processBlock(MachineBasicBlock &MBB) {
bool Changed = false;
MachineRegisterInfo &MRI = MBB.getParent()->getRegInfo();
for (MachineBasicBlock::iterator I = MBB.begin(), IE = MBB.end();
I != IE; ++I) {
MachineInstr *MI = I;
if (!MI->isFullCopy())
continue;
MachineOperand &DstMO = MI->getOperand(0);
MachineOperand &SrcMO = MI->getOperand(1);
if ( IsVSReg(DstMO.getReg(), MRI) &&
!IsVSReg(SrcMO.getReg(), MRI)) {
// This is a copy *to* a VSX register from a non-VSX register.
Changed = true;
const TargetRegisterClass *SrcRC =
IsVRReg(SrcMO.getReg(), MRI) ? &PPC::VSHRCRegClass :
&PPC::VSLRCRegClass;
assert((IsF8Reg(SrcMO.getReg(), MRI) ||
IsVRReg(SrcMO.getReg(), MRI)) &&
"Unknown source for a VSX copy");
unsigned NewVReg = MRI.createVirtualRegister(SrcRC);
BuildMI(MBB, MI, MI->getDebugLoc(),
TII->get(TargetOpcode::SUBREG_TO_REG), NewVReg)
.addImm(1) // add 1, not 0, because there is no implicit clearing
// of the high bits.
.addOperand(SrcMO)
.addImm(IsVRReg(SrcMO.getReg(), MRI) ? PPC::sub_128 :
PPC::sub_64);
// The source of the original copy is now the new virtual register.
SrcMO.setReg(NewVReg);
} else if (!IsVSReg(DstMO.getReg(), MRI) &&
IsVSReg(SrcMO.getReg(), MRI)) {
// This is a copy *from* a VSX register to a non-VSX register.
Changed = true;
const TargetRegisterClass *DstRC =
IsVRReg(DstMO.getReg(), MRI) ? &PPC::VSHRCRegClass :
&PPC::VSLRCRegClass;
assert((IsF8Reg(DstMO.getReg(), MRI) ||
IsVRReg(DstMO.getReg(), MRI)) &&
"Unknown destination for a VSX copy");
// Copy the VSX value into a new VSX register of the correct subclass.
unsigned NewVReg = MRI.createVirtualRegister(DstRC);
BuildMI(MBB, MI, MI->getDebugLoc(),
TII->get(TargetOpcode::COPY), NewVReg)
.addOperand(SrcMO);
// Transform the original copy into a subregister extraction copy.
SrcMO.setReg(NewVReg);
SrcMO.setSubReg(IsVRReg(DstMO.getReg(), MRI) ? PPC::sub_128 :
PPC::sub_64);
}
}
return Changed;
}
public:
bool runOnMachineFunction(MachineFunction &MF) override {
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
TM = static_cast<const PPCTargetMachine *>(&MF.getTarget());
// If we don't have VSX on the subtarget, don't do anything.
if (!TM->getSubtargetImpl()->hasVSX())
return false;
TII = TM->getSubtargetImpl()->getInstrInfo();
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
bool Changed = false;
for (MachineFunction::iterator I = MF.begin(); I != MF.end();) {
MachineBasicBlock &B = *I++;
if (processBlock(B))
Changed = true;
}
return Changed;
}
void getAnalysisUsage(AnalysisUsage &AU) const override {
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. llvm-svn: 203768
2014-03-13 15:58:58 +08:00
MachineFunctionPass::getAnalysisUsage(AU);
}
};
}
INITIALIZE_PASS(PPCVSXCopy, DEBUG_TYPE,
"PowerPC VSX Copy Legalization", false, false)
char PPCVSXCopy::ID = 0;
FunctionPass*
llvm::createPPCVSXCopyPass() { return new PPCVSXCopy(); }
#undef DEBUG_TYPE
#define DEBUG_TYPE "ppc-vsx-copy-cleanup"
namespace llvm {
void initializePPCVSXCopyCleanupPass(PassRegistry&);
}
namespace {
// PPCVSXCopyCleanup pass - We sometimes end up generating self copies of VSX
// registers (mostly because the ABI code still places all values into the
// "traditional" floating-point and vector registers). Remove them here.
struct PPCVSXCopyCleanup : public MachineFunctionPass {
static char ID;
PPCVSXCopyCleanup() : MachineFunctionPass(ID) {
initializePPCVSXCopyCleanupPass(*PassRegistry::getPassRegistry());
}
const PPCTargetMachine *TM;
const PPCInstrInfo *TII;
protected:
bool processBlock(MachineBasicBlock &MBB) {
bool Changed = false;
SmallVector<MachineInstr *, 4> ToDelete;
for (MachineBasicBlock::iterator I = MBB.begin(), IE = MBB.end();
I != IE; ++I) {
MachineInstr *MI = I;
if (MI->getOpcode() == PPC::XXLOR &&
MI->getOperand(0).getReg() == MI->getOperand(1).getReg() &&
MI->getOperand(0).getReg() == MI->getOperand(2).getReg())
ToDelete.push_back(MI);
}
if (!ToDelete.empty())
Changed = true;
for (unsigned i = 0, ie = ToDelete.size(); i != ie; ++i) {
DEBUG(dbgs() << "Removing VSX self-copy: " << *ToDelete[i]);
ToDelete[i]->eraseFromParent();
}
return Changed;
}
public:
bool runOnMachineFunction(MachineFunction &MF) override {
TM = static_cast<const PPCTargetMachine *>(&MF.getTarget());
// If we don't have VSX don't bother doing anything here.
if (!TM->getSubtargetImpl()->hasVSX())
return false;
TII = TM->getSubtargetImpl()->getInstrInfo();
bool Changed = false;
for (MachineFunction::iterator I = MF.begin(); I != MF.end();) {
MachineBasicBlock &B = *I++;
if (processBlock(B))
Changed = true;
}
return Changed;
}
void getAnalysisUsage(AnalysisUsage &AU) const override {
MachineFunctionPass::getAnalysisUsage(AU);
}
};
}
INITIALIZE_PASS(PPCVSXCopyCleanup, DEBUG_TYPE,
"PowerPC VSX Copy Cleanup", false, false)
char PPCVSXCopyCleanup::ID = 0;
FunctionPass*
llvm::createPPCVSXCopyCleanupPass() { return new PPCVSXCopyCleanup(); }
#undef DEBUG_TYPE
#define DEBUG_TYPE "ppc-early-ret"
STATISTIC(NumBCLR, "Number of early conditional returns");
STATISTIC(NumBLR, "Number of early returns");
namespace llvm {
void initializePPCEarlyReturnPass(PassRegistry&);
}
namespace {
// PPCEarlyReturn pass - For simple functions without epilogue code, move
// returns up, and create conditional returns, to avoid unnecessary
// branch-to-blr sequences.
struct PPCEarlyReturn : public MachineFunctionPass {
static char ID;
PPCEarlyReturn() : MachineFunctionPass(ID) {
initializePPCEarlyReturnPass(*PassRegistry::getPassRegistry());
}
const PPCTargetMachine *TM;
const PPCInstrInfo *TII;
protected:
bool processBlock(MachineBasicBlock &ReturnMBB) {
bool Changed = false;
MachineBasicBlock::iterator I = ReturnMBB.begin();
I = ReturnMBB.SkipPHIsAndLabels(I);
// The block must be essentially empty except for the blr.
if (I == ReturnMBB.end() || I->getOpcode() != PPC::BLR ||
I != ReturnMBB.getLastNonDebugInstr())
return Changed;
SmallVector<MachineBasicBlock*, 8> PredToRemove;
for (MachineBasicBlock::pred_iterator PI = ReturnMBB.pred_begin(),
PIE = ReturnMBB.pred_end(); PI != PIE; ++PI) {
bool OtherReference = false, BlockChanged = false;
for (MachineBasicBlock::iterator J = (*PI)->getLastNonDebugInstr();;) {
if (J->getOpcode() == PPC::B) {
if (J->getOperand(0).getMBB() == &ReturnMBB) {
// This is an unconditional branch to the return. Replace the
2013-12-17 12:50:40 +08:00
// branch with a blr.
BuildMI(**PI, J, J->getDebugLoc(), TII->get(PPC::BLR));
MachineBasicBlock::iterator K = J--;
K->eraseFromParent();
BlockChanged = true;
++NumBLR;
continue;
}
} else if (J->getOpcode() == PPC::BCC) {
if (J->getOperand(2).getMBB() == &ReturnMBB) {
// This is a conditional branch to the return. Replace the branch
// with a bclr.
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
BuildMI(**PI, J, J->getDebugLoc(), TII->get(PPC::BCCLR))
.addImm(J->getOperand(0).getImm())
.addReg(J->getOperand(1).getReg());
MachineBasicBlock::iterator K = J--;
K->eraseFromParent();
BlockChanged = true;
++NumBCLR;
continue;
}
Add CR-bit tracking to the PowerPC backend for i1 values This change enables tracking i1 values in the PowerPC backend using the condition register bits. These bits can be treated on PowerPC as separate registers; individual bit operations (and, or, xor, etc.) are supported. Tracking booleans in CR bits has several advantages: - Reduction in register pressure (because we no longer need GPRs to store boolean values). - Logical operations on booleans can be handled more efficiently; we used to have to move all results from comparisons into GPRs, perform promoted logical operations in GPRs, and then move the result back into condition register bits to be used by conditional branches. This can be very inefficient, because the throughput of these CR <-> GPR moves have high latency and low throughput (especially when other associated instructions are accounted for). - On the POWER7 and similar cores, we can increase total throughput by using the CR bits. CR bit operations have a dedicated functional unit. Most of this is more-or-less mechanical: Adjustments were needed in the calling-convention code, support was added for spilling/restoring individual condition-register bits, and conditional branch instruction definitions taking specific CR bits were added (plus patterns and code for generating bit-level operations). This is enabled by default when running at -O2 and higher. For -O0 and -O1, where the ability to debug is more important, this feature is disabled by default. Individual CR bits do not have assigned DWARF register numbers, and storing values in CR bits makes them invisible to the debugger. It is critical, however, that we don't move i1 values that have been promoted to larger values (such as those passed as function arguments) into bit registers only to quickly turn around and move the values back into GPRs (such as happens when values are returned by functions). A pair of target-specific DAG combines are added to remove the trunc/extends in: trunc(binary-ops(binary-ops(zext(x), zext(y)), ...) and: zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...) In short, we only want to use CR bits where some of the i1 values come from comparisons or are used by conditional branches or selects. To put it another way, if we can do the entire i1 computation in GPRs, then we probably should (on the POWER7, the GPR-operation throughput is higher, and for all cores, the CR <-> GPR moves are expensive). POWER7 test-suite performance results (from 10 runs in each configuration): SingleSource/Benchmarks/Misc/mandel-2: 35% speedup MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown MultiSource/Applications/lemon/lemon: 8% slowdown llvm-svn: 202451
2014-02-28 08:27:01 +08:00
} else if (J->getOpcode() == PPC::BC || J->getOpcode() == PPC::BCn) {
if (J->getOperand(1).getMBB() == &ReturnMBB) {
// This is a conditional branch to the return. Replace the branch
// with a bclr.
BuildMI(**PI, J, J->getDebugLoc(),
TII->get(J->getOpcode() == PPC::BC ?
PPC::BCLR : PPC::BCLRn))
.addReg(J->getOperand(0).getReg());
MachineBasicBlock::iterator K = J--;
K->eraseFromParent();
BlockChanged = true;
++NumBCLR;
continue;
}
} else if (J->isBranch()) {
if (J->isIndirectBranch()) {
if (ReturnMBB.hasAddressTaken())
OtherReference = true;
} else
for (unsigned i = 0; i < J->getNumOperands(); ++i)
if (J->getOperand(i).isMBB() &&
J->getOperand(i).getMBB() == &ReturnMBB)
OtherReference = true;
} else if (!J->isTerminator() && !J->isDebugValue())
break;
if (J == (*PI)->begin())
break;
--J;
}
if ((*PI)->canFallThrough() && (*PI)->isLayoutSuccessor(&ReturnMBB))
OtherReference = true;
2013-12-17 12:50:40 +08:00
// Predecessors are stored in a vector and can't be removed here.
if (!OtherReference && BlockChanged) {
PredToRemove.push_back(*PI);
}
if (BlockChanged)
Changed = true;
}
for (unsigned i = 0, ie = PredToRemove.size(); i != ie; ++i)
PredToRemove[i]->removeSuccessor(&ReturnMBB);
if (Changed && !ReturnMBB.hasAddressTaken()) {
// We now might be able to merge this blr-only block into its
// by-layout predecessor.
if (ReturnMBB.pred_size() == 1 &&
(*ReturnMBB.pred_begin())->isLayoutSuccessor(&ReturnMBB)) {
// Move the blr into the preceding block.
MachineBasicBlock &PrevMBB = **ReturnMBB.pred_begin();
PrevMBB.splice(PrevMBB.end(), &ReturnMBB, I);
PrevMBB.removeSuccessor(&ReturnMBB);
}
if (ReturnMBB.pred_empty())
ReturnMBB.eraseFromParent();
}
return Changed;
}
public:
bool runOnMachineFunction(MachineFunction &MF) override {
TM = static_cast<const PPCTargetMachine *>(&MF.getTarget());
TII = TM->getSubtargetImpl()->getInstrInfo();
bool Changed = false;
// If the function does not have at least two blocks, then there is
// nothing to do.
if (MF.size() < 2)
return Changed;
for (MachineFunction::iterator I = MF.begin(); I != MF.end();) {
2013-12-17 12:50:40 +08:00
MachineBasicBlock &B = *I++;
if (processBlock(B))
Changed = true;
}
return Changed;
}
void getAnalysisUsage(AnalysisUsage &AU) const override {
MachineFunctionPass::getAnalysisUsage(AU);
}
};
}
INITIALIZE_PASS(PPCEarlyReturn, DEBUG_TYPE,
"PowerPC Early-Return Creation", false, false)
char PPCEarlyReturn::ID = 0;
FunctionPass*
llvm::createPPCEarlyReturnPass() { return new PPCEarlyReturn(); }