maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/SystemZ/risbg-01.ll

506 lines
12 KiB
LLVM
Raw Normal View History

[SystemZ] Use RISBG for (shift (and ...)) Another patch in the series to make more use of R.SBG. This one extends r186072 and r186073 to handle cases where the AND is inside the shift. llvm-svn: 186399
2013-07-16 19:02:24 +08:00
; Test sequences that can use RISBG with a zeroed first operand.
[SystemZ] Automatically detect zEC12 and z196 hosts As on other hosts, the CPU identification instruction is priveleged, so we need to look through /proc/cpuinfo. I copied the PowerPC way of handling "generic". Several tests were implicitly assuming z10 and so failed on z196. llvm-svn: 193742
2013-10-31 20:14:17 +08:00
; The tests here assume that RISBLG isn't available.
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
;
[SystemZ] Automatically detect zEC12 and z196 hosts As on other hosts, the CPU identification instruction is priveleged, so we need to look through /proc/cpuinfo. I copied the PowerPC way of handling "generic". Several tests were implicitly assuming z10 and so failed on z196. llvm-svn: 193742
2013-10-31 20:14:17 +08:00
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z10 | FileCheck %s
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; Test an extraction of bit 0 from a right-shifted value.
define i32 @f1(i32 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f1:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 63, 191, 54
; CHECK: br %r14
%shr = lshr i32 %foo, 10
%and = and i32 %shr, 1
ret i32 %and
}
; ...and again with i64.
define i64 @f2(i64 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f2:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 63, 191, 54
; CHECK: br %r14
%shr = lshr i64 %foo, 10
%and = and i64 %shr, 1
ret i64 %and
}
; Test an extraction of other bits from a right-shifted value.
define i32 @f3(i32 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f3:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 60, 189, 42
; CHECK: br %r14
%shr = lshr i32 %foo, 22
%and = and i32 %shr, 12
ret i32 %and
}
; ...and again with i64.
define i64 @f4(i64 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f4:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 60, 189, 42
; CHECK: br %r14
%shr = lshr i64 %foo, 22
%and = and i64 %shr, 12
ret i64 %and
}
; Test an extraction of most bits from a right-shifted value.
; The range should be reduced to exclude the zeroed high bits.
define i32 @f5(i32 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f5:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 34, 188, 62
; CHECK: br %r14
%shr = lshr i32 %foo, 2
%and = and i32 %shr, -8
ret i32 %and
}
; ...and again with i64.
define i64 @f6(i64 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f6:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 2, 188, 62
; CHECK: br %r14
%shr = lshr i64 %foo, 2
%and = and i64 %shr, -8
ret i64 %and
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Try the next value up (mask ....1111001). This needs a separate shift
; and mask.
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
define i32 @f7(i32 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f7:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: srl %r2, 2
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: nill %r2, 65529
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: br %r14
%shr = lshr i32 %foo, 2
%and = and i32 %shr, -7
ret i32 %and
}
; ...and again with i64.
define i64 @f8(i64 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f8:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: srlg %r2, %r2, 2
; CHECK: nill %r2, 65529
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: br %r14
%shr = lshr i64 %foo, 2
%and = and i64 %shr, -7
ret i64 %and
}
; Test an extraction of bits from a left-shifted value. The range should
; be reduced to exclude the zeroed low bits.
define i32 @f9(i32 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f9:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 56, 189, 2
; CHECK: br %r14
%shr = shl i32 %foo, 2
%and = and i32 %shr, 255
ret i32 %and
}
; ...and again with i64.
define i64 @f10(i64 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f10:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 56, 189, 2
; CHECK: br %r14
%shr = shl i64 %foo, 2
%and = and i64 %shr, 255
ret i64 %and
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Try a wrap-around mask (mask ....111100001111). This needs a separate shift
; and mask.
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
define i32 @f11(i32 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f11:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: sll %r2, 2
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: nill %r2, 65295
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: br %r14
%shr = shl i32 %foo, 2
%and = and i32 %shr, -241
ret i32 %and
}
; ...and again with i64.
define i64 @f12(i64 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f12:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: sllg %r2, %r2, 2
; CHECK: nill %r2, 65295
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: br %r14
%shr = shl i64 %foo, 2
%and = and i64 %shr, -241
ret i64 %and
}
; Test an extraction from a rotated value, no mask wraparound.
; This is equivalent to the lshr case, because the bits from the
; shl are not used.
define i32 @f13(i32 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f13:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 56, 188, 46
; CHECK: br %r14
%parta = shl i32 %foo, 14
%partb = lshr i32 %foo, 18
%rotl = or i32 %parta, %partb
%and = and i32 %rotl, 248
ret i32 %and
}
; ...and again with i64.
define i64 @f14(i64 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f14:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 56, 188, 14
; CHECK: br %r14
%parta = shl i64 %foo, 14
%partb = lshr i64 %foo, 50
%rotl = or i64 %parta, %partb
%and = and i64 %rotl, 248
ret i64 %and
}
; Try a case in which only the bits from the shl are used.
define i32 @f15(i32 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f15:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 47, 177, 14
; CHECK: br %r14
%parta = shl i32 %foo, 14
%partb = lshr i32 %foo, 18
%rotl = or i32 %parta, %partb
%and = and i32 %rotl, 114688
ret i32 %and
}
; ...and again with i64.
define i64 @f16(i64 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f16:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 47, 177, 14
; CHECK: br %r14
%parta = shl i64 %foo, 14
%partb = lshr i64 %foo, 50
%rotl = or i64 %parta, %partb
%and = and i64 %rotl, 114688
ret i64 %and
}
; Test a 32-bit rotate in which both parts of the OR are needed.
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; This needs a separate shift and mask.
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
define i32 @f17(i32 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f17:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: rll %r2, %r2, 4
; CHECK: nilf %r2, 126
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: br %r14
%parta = shl i32 %foo, 4
%partb = lshr i32 %foo, 28
%rotl = or i32 %parta, %partb
%and = and i32 %rotl, 126
ret i32 %and
}
; ...and for i64, where RISBG should do the rotate too.
define i64 @f18(i64 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f18:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 57, 190, 4
; CHECK: br %r14
%parta = shl i64 %foo, 4
%partb = lshr i64 %foo, 60
%rotl = or i64 %parta, %partb
%and = and i64 %rotl, 126
ret i64 %and
}
; Test an arithmetic shift right in which some of the sign bits are kept.
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; This needs a separate shift and mask.
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
define i32 @f19(i32 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f19:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: sra %r2, 28
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: nilf %r2, 30
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: br %r14
%shr = ashr i32 %foo, 28
%and = and i32 %shr, 30
ret i32 %and
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; ...and again with i64. In this case RISBG is the best way of doing the AND.
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
define i64 @f20(i64 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f20:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: srag [[REG:%r[0-5]]], %r2, 60
; CHECK: risbg %r2, [[REG]], 59, 190, 0
; CHECK: br %r14
%shr = ashr i64 %foo, 60
%and = and i64 %shr, 30
ret i64 %and
}
; Now try an arithmetic right shift in which the sign bits aren't needed.
; Introduce a second use of %shr so that the ashr doesn't decompose to
; an lshr.
[SystemZ] set 'guessInstructionProperties = 0' and set flags as needed. This has proven a healthy exercise, as many cases of incorrect instruction flags were corrected in the process. As part of this, IntrWriteMem was added to several SystemZ instrinsics. Furthermore, a bug was exposed in TwoAddress with this change (as incorrect hasSideEffects flags were removed and instructions could now be sunk), and the test case for that bugfix (r319646) is included here as test/CodeGen/SystemZ/twoaddr-sink.ll. One temporary test regression (one extra copy) which will hopefully go away in upcoming patches for similar cases: test/CodeGen/SystemZ/vec-trunc-to-i1.ll Review: Ulrich Weigand. https://reviews.llvm.org/D40437 llvm-svn: 319756
2017-12-05 19:24:39 +08:00
; NOTE: the extra move to %r2 should not be needed (temporary FAIL)
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
define i32 @f21(i32 %foo, i32 *%dest) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f21:
[SystemZ] set 'guessInstructionProperties = 0' and set flags as needed. This has proven a healthy exercise, as many cases of incorrect instruction flags were corrected in the process. As part of this, IntrWriteMem was added to several SystemZ instrinsics. Furthermore, a bug was exposed in TwoAddress with this change (as incorrect hasSideEffects flags were removed and instructions could now be sunk), and the test case for that bugfix (r319646) is included here as test/CodeGen/SystemZ/twoaddr-sink.ll. One temporary test regression (one extra copy) which will hopefully go away in upcoming patches for similar cases: test/CodeGen/SystemZ/vec-trunc-to-i1.ll Review: Ulrich Weigand. https://reviews.llvm.org/D40437 llvm-svn: 319756
2017-12-05 19:24:39 +08:00
; CHECK: risbg %r0, %r2, 60, 190, 36
; CHECK: lr %r2, %r0
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: br %r14
%shr = ashr i32 %foo, 28
store i32 %shr, i32 *%dest
%and = and i32 %shr, 14
ret i32 %and
}
; ...and again with i64.
define i64 @f22(i64 %foo, i64 *%dest) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f22:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 60, 190, 4
; CHECK: br %r14
%shr = ashr i64 %foo, 60
store i64 %shr, i64 *%dest
%and = and i64 %shr, 14
ret i64 %and
}
; Check that we use RISBG for shifted values even if the AND is a
; natural zero extension.
define i64 @f23(i64 %foo) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f23:
[SystemZ] Add testcase missing from r186073 llvm-svn: 186074
2013-07-11 17:10:38 +08:00
; CHECK: risbg %r2, %r2, 56, 191, 62
; CHECK: br %r14
%shr = lshr i64 %foo, 2
%and = and i64 %shr, 255
ret i64 %and
}
[SystemZ] Use RISBG for (shift (and ...)) Another patch in the series to make more use of R.SBG. This one extends r186072 and r186073 to handle cases where the AND is inside the shift. llvm-svn: 186399
2013-07-16 19:02:24 +08:00
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Test a case where the AND comes before a rotate. This needs a separate
; mask and rotate.
[SystemZ] Use RISBG for (shift (and ...)) Another patch in the series to make more use of R.SBG. This one extends r186072 and r186073 to handle cases where the AND is inside the shift. llvm-svn: 186399
2013-07-16 19:02:24 +08:00
define i32 @f24(i32 %foo) {
; CHECK-LABEL: f24:
[SystemZ] Improve risbg-01.ll test The old mask in f24 wasn't well chosen because the lshr would always be zero. CodeGen didn't detect this but InstCombine would. The new mask ensures that both shifts are needed. f26 is specifically testing for a wrap-around mask. The AND can be applied to just the shift left, either before or after the shift. Again, CodeGen kept it in the original form but InstCombine would mask after the shift instead. The exact choice of NILF isn't important for the test so I just dropped it and kept the rotate. llvm-svn: 199115
2014-01-13 23:40:25 +08:00
; CHECK: nilf %r2, 254
; CHECK: rll %r2, %r2, 29
[SystemZ] Use RISBG for (shift (and ...)) Another patch in the series to make more use of R.SBG. This one extends r186072 and r186073 to handle cases where the AND is inside the shift. llvm-svn: 186399
2013-07-16 19:02:24 +08:00
; CHECK: br %r14
[SystemZ] Improve risbg-01.ll test The old mask in f24 wasn't well chosen because the lshr would always be zero. CodeGen didn't detect this but InstCombine would. The new mask ensures that both shifts are needed. f26 is specifically testing for a wrap-around mask. The AND can be applied to just the shift left, either before or after the shift. Again, CodeGen kept it in the original form but InstCombine would mask after the shift instead. The exact choice of NILF isn't important for the test so I just dropped it and kept the rotate. llvm-svn: 199115
2014-01-13 23:40:25 +08:00
%and = and i32 %foo, 254
%parta = lshr i32 %and, 3
%partb = shl i32 %and, 29
[SystemZ] Use RISBG for (shift (and ...)) Another patch in the series to make more use of R.SBG. This one extends r186072 and r186073 to handle cases where the AND is inside the shift. llvm-svn: 186399
2013-07-16 19:02:24 +08:00
%rotl = or i32 %parta, %partb
ret i32 %rotl
}
; ...and again with i64, where a single RISBG is enough.
define i64 @f25(i64 %foo) {
; CHECK-LABEL: f25:
; CHECK: risbg %r2, %r2, 57, 187, 3
; CHECK: br %r14
%and = and i64 %foo, 14
%parta = shl i64 %and, 3
%partb = lshr i64 %and, 61
%rotl = or i64 %parta, %partb
ret i64 %rotl
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Test a wrap-around case in which the AND comes before a rotate.
; This again needs a separate mask and rotate.
[SystemZ] Use RISBG for (shift (and ...)) Another patch in the series to make more use of R.SBG. This one extends r186072 and r186073 to handle cases where the AND is inside the shift. llvm-svn: 186399
2013-07-16 19:02:24 +08:00
define i32 @f26(i32 %foo) {
; CHECK-LABEL: f26:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: rll %r2, %r2, 5
[SystemZ] Use RISBG for (shift (and ...)) Another patch in the series to make more use of R.SBG. This one extends r186072 and r186073 to handle cases where the AND is inside the shift. llvm-svn: 186399
2013-07-16 19:02:24 +08:00
; CHECK: br %r14
%and = and i32 %foo, -49
%parta = shl i32 %and, 5
%partb = lshr i32 %and, 27
%rotl = or i32 %parta, %partb
ret i32 %rotl
}
; ...and again with i64, where a single RISBG is OK.
define i64 @f27(i64 %foo) {
; CHECK-LABEL: f27:
; CHECK: risbg %r2, %r2, 55, 180, 5
; CHECK: br %r14
%and = and i64 %foo, -49
%parta = shl i64 %and, 5
%partb = lshr i64 %and, 59
%rotl = or i64 %parta, %partb
ret i64 %rotl
}
; Test a case where the AND comes before a shift left.
define i32 @f28(i32 %foo) {
; CHECK-LABEL: f28:
; CHECK: risbg %r2, %r2, 32, 173, 17
; CHECK: br %r14
%and = and i32 %foo, 32766
%shl = shl i32 %and, 17
ret i32 %shl
}
; ...and again with i64.
define i64 @f29(i64 %foo) {
; CHECK-LABEL: f29:
; CHECK: risbg %r2, %r2, 0, 141, 49
; CHECK: br %r14
%and = and i64 %foo, 32766
%shl = shl i64 %and, 49
ret i64 %shl
}
; Test the next shift up from f28, in which the mask should get shortened.
define i32 @f30(i32 %foo) {
; CHECK-LABEL: f30:
; CHECK: risbg %r2, %r2, 32, 172, 18
; CHECK: br %r14
%and = and i32 %foo, 32766
%shl = shl i32 %and, 18
ret i32 %shl
}
; ...and again with i64.
define i64 @f31(i64 %foo) {
; CHECK-LABEL: f31:
; CHECK: risbg %r2, %r2, 0, 140, 50
; CHECK: br %r14
%and = and i64 %foo, 32766
%shl = shl i64 %and, 50
ret i64 %shl
}
; Test a wrap-around case in which the shift left comes after the AND.
; We can't use RISBG for the shift in that case.
define i32 @f32(i32 %foo) {
; CHECK-LABEL: f32:
; CHECK: sll %r2
; CHECK: br %r14
%and = and i32 %foo, -7
%shl = shl i32 %and, 10
ret i32 %shl
}
; ...and again with i64.
define i64 @f33(i64 %foo) {
; CHECK-LABEL: f33:
; CHECK: sllg %r2
; CHECK: br %r14
%and = and i64 %foo, -7
%shl = shl i64 %and, 10
ret i64 %shl
}
; Test a case where the AND comes before a shift right.
define i32 @f34(i32 %foo) {
; CHECK-LABEL: f34:
; CHECK: risbg %r2, %r2, 57, 191, 55
; CHECK: br %r14
%and = and i32 %foo, 65535
%shl = lshr i32 %and, 9
ret i32 %shl
}
; ...and again with i64.
define i64 @f35(i64 %foo) {
; CHECK-LABEL: f35:
; CHECK: risbg %r2, %r2, 57, 191, 55
; CHECK: br %r14
%and = and i64 %foo, 65535
%shl = lshr i64 %and, 9
ret i64 %shl
}
; Test a wrap-around case where the AND comes before a shift right.
; We can't use RISBG for the shift in that case.
define i32 @f36(i32 %foo) {
; CHECK-LABEL: f36:
; CHECK: srl %r2
; CHECK: br %r14
%and = and i32 %foo, -25
%shl = lshr i32 %and, 1
ret i32 %shl
}
; ...and again with i64.
define i64 @f37(i64 %foo) {
; CHECK-LABEL: f37:
; CHECK: srlg %r2
; CHECK: br %r14
%and = and i64 %foo, -25
%shl = lshr i64 %and, 1
ret i64 %shl
}
[SystemZ] Generalize RxSBG SRA case The original code only folded SRA into ROTATE ... SELECTED BITS if there was no outer shift. This patch splits out that check and generalises it slightly. The extra cases aren't really that interesting, but this is paving the way for RNSBG support. llvm-svn: 186571
2013-07-18 18:14:55 +08:00
; Test a combination involving a large ASHR and a shift left. We can't
; use RISBG there.
define i64 @f38(i64 %foo) {
; CHECK-LABEL: f38:
; CHECK: srag {{%r[0-5]}}
; CHECK: sllg {{%r[0-5]}}
; CHECK: br %r14
%ashr = ashr i64 %foo, 32
%shl = shl i64 %ashr, 5
ret i64 %shl
}
; Try a similar thing in which no shifted sign bits are kept.
define i64 @f39(i64 %foo, i64 *%dest) {
; CHECK-LABEL: f39:
; CHECK: srag [[REG:%r[01345]]], %r2, 35
; CHECK: risbg %r2, %r2, 33, 189, 31
; CHECK: br %r14
%ashr = ashr i64 %foo, 35
store i64 %ashr, i64 *%dest
%shl = shl i64 %ashr, 2
%and = and i64 %shl, 2147483647
ret i64 %and
}
; ...and again with the next highest shift value, where one sign bit is kept.
define i64 @f40(i64 %foo, i64 *%dest) {
; CHECK-LABEL: f40:
; CHECK: srag [[REG:%r[01345]]], %r2, 36
; CHECK: risbg %r2, [[REG]], 33, 189, 2
; CHECK: br %r14
%ashr = ashr i64 %foo, 36
store i64 %ashr, i64 *%dest
%shl = shl i64 %ashr, 2
%and = and i64 %shl, 2147483647
ret i64 %and
}
[SystemZ] Fix incorrect use of RISBG for a zero-extended right shift We would wrongly transform the testcase into the equivalent of an AND with 1. The problem was that, when testing whether the shifted-in bits of the right shift were significant, we used the width of the final zero-extended result rather than the width of the shifted value. llvm-svn: 195731
2013-11-26 18:53:16 +08:00
[SystemZ] Extend RISBG optimization The handling of ANY_EXTEND and ZERO_EXTEND was too strict. In this context we can treat ZERO_EXTEND in much the same way as an AND and then also handle outermost ZERO_EXTENDs. I couldn't find a test that benefited from the ANY_EXTEND change, but it's more obvious to write it this way once SIGN_EXTEND and ZERO_EXTEND are handled differently. llvm-svn: 197802
2013-12-20 19:49:48 +08:00
; Check a case where the result is zero-extended.
define i64 @f41(i32 %a) {
; CHECK-LABEL: f41
; CHECK: risbg %r2, %r2, 36, 191, 62
; CHECK: br %r14
%shl = shl i32 %a, 2
%shr = lshr i32 %shl, 4
%ext = zext i32 %shr to i64
ret i64 %ext
}
[SystemZ] Fix incorrect use of RISBG for a zero-extended right shift We would wrongly transform the testcase into the equivalent of an AND with 1. The problem was that, when testing whether the shifted-in bits of the right shift were significant, we used the width of the final zero-extended result rather than the width of the shifted value. llvm-svn: 195731
2013-11-26 18:53:16 +08:00
; In this case the sign extension is converted to a pair of 32-bit shifts,
; which is then extended to 64 bits. We previously used the wrong bit size
; when testing whether the shifted-in bits of the shift right were significant.
[SystemZ] Extend RISBG optimization The handling of ANY_EXTEND and ZERO_EXTEND was too strict. In this context we can treat ZERO_EXTEND in much the same way as an AND and then also handle outermost ZERO_EXTENDs. I couldn't find a test that benefited from the ANY_EXTEND change, but it's more obvious to write it this way once SIGN_EXTEND and ZERO_EXTEND are handled differently. llvm-svn: 197802
2013-12-20 19:49:48 +08:00
define i64 @f42(i1 %x) {
; CHECK-LABEL: f42:
[DAG] optimize negation of bool Use mask and negate for legalization of i1 source type with SIGN_EXTEND_INREG. With the mask, this should be no worse than 2 shifts. The mask can be eliminated in some cases, so that should be better than 2 shifts. This change exposed some missing folds related to negation: https://reviews.llvm.org/rL284239 https://reviews.llvm.org/rL284395 There may be others, so please let me know if you see any regressions. Differential Revision: https://reviews.llvm.org/D25485 llvm-svn: 284611
2016-10-20 00:58:59 +08:00
; CHECK: nilf %r2, 1
; CHECK: lcr %r0, %r2
; CHECK: llgcr %r2, %r0
[SystemZ] Fix incorrect use of RISBG for a zero-extended right shift We would wrongly transform the testcase into the equivalent of an AND with 1. The problem was that, when testing whether the shifted-in bits of the right shift were significant, we used the width of the final zero-extended result rather than the width of the shifted value. llvm-svn: 195731
2013-11-26 18:53:16 +08:00
; CHECK: br %r14
%ext = sext i1 %x to i8
%ext2 = zext i8 %ext to i64
ret i64 %ext2
}
[SystemZ] Recognize RISBG opportunities involving a truncate Summary: Recognize RISBG opportunities where the end result is narrower than the original input - where a truncate separates the shift/and operations. The motivating case is some code in postgres which looks like: srlg %r2, %r0, 11 nilh %r2, 255 Reviewers: uweigand Author: RolandF Differential Revision: http://reviews.llvm.org/D21452 llvm-svn: 273433
2016-06-23 00:16:27 +08:00
; Check that we get the case where a 64-bit shift is used by a 32-bit and.
define signext i32 @f43(i64 %x) {
; CHECK-LABEL: f43:
; CHECK: risbg [[REG:%r[0-5]]], %r2, 32, 189, 52
; CHECK: lgfr %r2, [[REG]]
%shr3 = lshr i64 %x, 12
%shr3.tr = trunc i64 %shr3 to i32
%conv = and i32 %shr3.tr, -4
ret i32 %conv
}
; Check that we don't get the case where the 32-bit and mask is not contiguous
define signext i32 @f44(i64 %x) {
; CHECK-LABEL: f44:
; CHECK: srlg [[REG:%r[0-5]]], %r2, 12
%shr4 = lshr i64 %x, 12
%conv = trunc i64 %shr4 to i32
%and = and i32 %conv, 10
ret i32 %and
}