maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/AArch64/arm64-tls-execs.ll

63 lines
2.0 KiB
LLVM
Raw Normal View History

ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
; RUN: llc -mtriple=arm64-none-linux-gnu -verify-machineinstrs -show-mc-encoding < %s | FileCheck %s
; RUN: llc -mtriple=arm64-none-linux-gnu -filetype=obj < %s | llvm-objdump -r - | FileCheck --check-prefix=CHECK-RELOC %s
@initial_exec_var = external thread_local(initialexec) global i32
define i32 @test_initial_exec() {
; CHECK-LABEL: test_initial_exec:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%val = load i32, i32* @initial_exec_var
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
; CHECK: adrp x[[GOTADDR:[0-9]+]], :gottprel:initial_exec_var
; CHECK: ldr x[[TP_OFFSET:[0-9]+]], [x[[GOTADDR]], :gottprel_lo12:initial_exec_var]
; CHECK: mrs x[[TP:[0-9]+]], TPIDR_EL0
; CHECK: ldr w0, [x[[TP]], x[[TP_OFFSET]]]
; CHECK-RELOC: R_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
; CHECK-RELOC: R_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
ret i32 %val
}
define i32* @test_initial_exec_addr() {
; CHECK-LABEL: test_initial_exec_addr:
ret i32* @initial_exec_var
; CHECK: adrp x[[GOTADDR:[0-9]+]], :gottprel:initial_exec_var
; CHECK: ldr [[TP_OFFSET:x[0-9]+]], [x[[GOTADDR]], :gottprel_lo12:initial_exec_var]
; CHECK: mrs [[TP:x[0-9]+]], TPIDR_EL0
; CHECK: add x0, [[TP]], [[TP_OFFSET]]
; CHECK-RELOC: R_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
; CHECK-RELOC: R_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
}
@local_exec_var = thread_local(localexec) global i32 0
define i32 @test_local_exec() {
; CHECK-LABEL: test_local_exec:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%val = load i32, i32* @local_exec_var
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK: mrs x[[R1:[0-9]+]], TPIDR_EL0
; CHECK: add x[[R2:[0-9]+]], x[[R1]], :tprel_hi12:local_exec_var
; CHECK: add x[[R3:[0-9]+]], x[[R2]], :tprel_lo12_nc:local_exec_var
; CHECK: ldr w0, [x[[R3]]]
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-RELOC: R_AARCH64_TLSLE_ADD_TPREL_HI12
; CHECK-RELOC: R_AARCH64_TLSLE_ADD_TPREL_LO12_NC
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
ret i32 %val
}
define i32* @test_local_exec_addr() {
; CHECK-LABEL: test_local_exec_addr:
ret i32* @local_exec_var
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK: mrs x[[R1:[0-9]+]], TPIDR_EL0
; CHECK: add x[[R2:[0-9]+]], x[[R1]], :tprel_hi12:local_exec_var
; CHECK: add x0, x[[R2]], :tprel_lo12_nc:local_exec_var
; CHECK: ret
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-RELOC: R_AARCH64_TLSLE_ADD_TPREL_HI12
; CHECK-RELOC: R_AARCH64_TLSLE_ADD_TPREL_LO12_NC
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
}