maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/lib/CodeGen/TargetLoweringBase.cpp

1705 lines
66 KiB
C++
Raw Normal View History

Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
//===-- TargetLoweringBase.cpp - Implement the TargetLoweringBase class ---===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This implements the TargetLoweringBase class.
//
//===----------------------------------------------------------------------===//
#include "llvm/Target/TargetLowering.h"
#include "llvm/ADT/BitVector.h"
#include "llvm/ADT/STLExtras.h"
enable SDISel sincos optimization for GNU environments - add sincos to runtime library if target triple environment is GNU - added canCombineSinCosLibcall() which checks that sincos is in the RTL and if the environment is GNU then unsafe fpmath is enabled (required to preserve errno) - extended sincos-opt lit test Reviewed by: Hal Finkel llvm-svn: 175283
2013-02-16 02:45:18 +08:00
#include "llvm/ADT/Triple.h"
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
#include "llvm/CodeGen/Analysis.h"
#include "llvm/CodeGen/MachineFrameInfo.h"
#include "llvm/CodeGen/MachineFunction.h"
Refactor a lot of patchpoint/stackmap related code to simplify and make it target independent. Most of the x86 specific stackmap/patchpoint handling was necessitated by the use of the native address-mode format for frame index operands. PEI has now been modified to treat stackmap/patchpoint similarly to DEBUG_INFO, allowing us to use a simple, platform independent register/offset pair for frame indexes on stackmap/patchpoints. Notes: - Folding is now platform independent and automatically supported. - Emiting patchpoints with direct memory references now just involves calling the TargetLoweringBase::emitPatchPoint utility method from the target's XXXTargetLowering::EmitInstrWithCustomInserter method. (See X86TargetLowering for an example). - No more ugly platform-specific operand parsers. This patch shouldn't change the generated output for X86. llvm-svn: 195944
2013-11-29 11:07:54 +08:00
#include "llvm/CodeGen/MachineInstrBuilder.h"
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
#include "llvm/CodeGen/MachineJumpTableInfo.h"
Refactor a lot of patchpoint/stackmap related code to simplify and make it target independent. Most of the x86 specific stackmap/patchpoint handling was necessitated by the use of the native address-mode format for frame index operands. PEI has now been modified to treat stackmap/patchpoint similarly to DEBUG_INFO, allowing us to use a simple, platform independent register/offset pair for frame indexes on stackmap/patchpoints. Notes: - Folding is now platform independent and automatically supported. - Emiting patchpoints with direct memory references now just involves calling the TargetLoweringBase::emitPatchPoint utility method from the target's XXXTargetLowering::EmitInstrWithCustomInserter method. (See X86TargetLowering for an example). - No more ugly platform-specific operand parsers. This patch shouldn't change the generated output for X86. llvm-svn: 195944
2013-11-29 11:07:54 +08:00
#include "llvm/CodeGen/StackMaps.h"
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
#include "llvm/IR/DataLayout.h"
#include "llvm/IR/DerivedTypes.h"
#include "llvm/IR/GlobalVariable.h"
Add back r201608, r201622, r201624 and r201625 r201608 made llvm corretly handle private globals with MachO. r201622 fixed a bug in it and r201624 and r201625 were changes for using private linkage, assuming that llvm would do the right thing. They all got reverted because r201608 introduced a crash in LTO. This patch includes a fix for that. The issue was that TargetLoweringObjectFile now has to be initialized before we can mangle names of private globals. This is trivially true during the normal codegen pipeline (the asm printer does it), but LTO has to do it manually. llvm-svn: 201700
2014-02-20 01:23:20 +08:00
#include "llvm/IR/Mangler.h"
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
#include "llvm/MC/MCAsmInfo.h"
Add back r201608, r201622, r201624 and r201625 r201608 made llvm corretly handle private globals with MachO. r201622 fixed a bug in it and r201624 and r201625 were changes for using private linkage, assuming that llvm would do the right thing. They all got reverted because r201608 introduced a crash in LTO. This patch includes a fix for that. The issue was that TargetLoweringObjectFile now has to be initialized before we can mangle names of private globals. This is trivially true during the normal codegen pipeline (the asm printer does it), but LTO has to do it manually. llvm-svn: 201700
2014-02-20 01:23:20 +08:00
#include "llvm/MC/MCContext.h"
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
#include "llvm/MC/MCExpr.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/MathExtras.h"
#include "llvm/Target/TargetLoweringObjectFile.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Target/TargetRegisterInfo.h"
Remove the TargetMachine forwards for TargetSubtargetInfo based information and update all callers. No functional change. llvm-svn: 214781
2014-08-05 05:25:23 +08:00
#include "llvm/Target/TargetSubtargetInfo.h"
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
#include <cctype>
using namespace llvm;
add a cl::opt override for TargetLoweringBase's JumpIsExpensive This patch is not intended to change existing codegen behavior for any target. It just exposes the JumpIsExpensive setting on the command-line to allow for easier testing and emergency overrides. Also, change the existing regression test to use FileCheck, explicitly specify the jump-is-expensive option, and use more precise checks. Differential Revision: http://reviews.llvm.org/D10846 llvm-svn: 241179
2015-07-02 02:10:20 +08:00
static cl::opt<bool> JumpIsExpensiveOverride(
"jump-is-expensive", cl::init(false),
cl::desc("Do not create extra branches to split comparison logic."),
cl::Hidden);
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
/// InitLibcallNames - Set default libcall names.
///
InitLibcallNames can take a Triple instead of a TargetMachine. llvm-svn: 210045
2014-06-03 04:51:49 +08:00
static void InitLibcallNames(const char **Names, const Triple &TT) {
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
Names[RTLIB::SHL_I16] = "__ashlhi3";
Names[RTLIB::SHL_I32] = "__ashlsi3";
Names[RTLIB::SHL_I64] = "__ashldi3";
Names[RTLIB::SHL_I128] = "__ashlti3";
Names[RTLIB::SRL_I16] = "__lshrhi3";
Names[RTLIB::SRL_I32] = "__lshrsi3";
Names[RTLIB::SRL_I64] = "__lshrdi3";
Names[RTLIB::SRL_I128] = "__lshrti3";
Names[RTLIB::SRA_I16] = "__ashrhi3";
Names[RTLIB::SRA_I32] = "__ashrsi3";
Names[RTLIB::SRA_I64] = "__ashrdi3";
Names[RTLIB::SRA_I128] = "__ashrti3";
Names[RTLIB::MUL_I8] = "__mulqi3";
Names[RTLIB::MUL_I16] = "__mulhi3";
Names[RTLIB::MUL_I32] = "__mulsi3";
Names[RTLIB::MUL_I64] = "__muldi3";
Names[RTLIB::MUL_I128] = "__multi3";
Names[RTLIB::MULO_I32] = "__mulosi4";
Names[RTLIB::MULO_I64] = "__mulodi4";
Names[RTLIB::MULO_I128] = "__muloti4";
Names[RTLIB::SDIV_I8] = "__divqi3";
Names[RTLIB::SDIV_I16] = "__divhi3";
Names[RTLIB::SDIV_I32] = "__divsi3";
Names[RTLIB::SDIV_I64] = "__divdi3";
Names[RTLIB::SDIV_I128] = "__divti3";
Names[RTLIB::UDIV_I8] = "__udivqi3";
Names[RTLIB::UDIV_I16] = "__udivhi3";
Names[RTLIB::UDIV_I32] = "__udivsi3";
Names[RTLIB::UDIV_I64] = "__udivdi3";
Names[RTLIB::UDIV_I128] = "__udivti3";
Names[RTLIB::SREM_I8] = "__modqi3";
Names[RTLIB::SREM_I16] = "__modhi3";
Names[RTLIB::SREM_I32] = "__modsi3";
Names[RTLIB::SREM_I64] = "__moddi3";
Names[RTLIB::SREM_I128] = "__modti3";
Names[RTLIB::UREM_I8] = "__umodqi3";
Names[RTLIB::UREM_I16] = "__umodhi3";
Names[RTLIB::UREM_I32] = "__umodsi3";
Names[RTLIB::UREM_I64] = "__umoddi3";
Names[RTLIB::UREM_I128] = "__umodti3";
// These are generally not available.
[C++11] More 'nullptr' conversion. In some cases just using a boolean check instead of comparing to nullptr. llvm-svn: 206142
2014-04-14 08:51:57 +08:00
Names[RTLIB::SDIVREM_I8] = nullptr;
Names[RTLIB::SDIVREM_I16] = nullptr;
Names[RTLIB::SDIVREM_I32] = nullptr;
Names[RTLIB::SDIVREM_I64] = nullptr;
Names[RTLIB::SDIVREM_I128] = nullptr;
Names[RTLIB::UDIVREM_I8] = nullptr;
Names[RTLIB::UDIVREM_I16] = nullptr;
Names[RTLIB::UDIVREM_I32] = nullptr;
Names[RTLIB::UDIVREM_I64] = nullptr;
Names[RTLIB::UDIVREM_I128] = nullptr;
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
Names[RTLIB::NEG_I32] = "__negsi2";
Names[RTLIB::NEG_I64] = "__negdi2";
Names[RTLIB::ADD_F32] = "__addsf3";
Names[RTLIB::ADD_F64] = "__adddf3";
Names[RTLIB::ADD_F80] = "__addxf3";
Names[RTLIB::ADD_F128] = "__addtf3";
Names[RTLIB::ADD_PPCF128] = "__gcc_qadd";
Names[RTLIB::SUB_F32] = "__subsf3";
Names[RTLIB::SUB_F64] = "__subdf3";
Names[RTLIB::SUB_F80] = "__subxf3";
Names[RTLIB::SUB_F128] = "__subtf3";
Names[RTLIB::SUB_PPCF128] = "__gcc_qsub";
Names[RTLIB::MUL_F32] = "__mulsf3";
Names[RTLIB::MUL_F64] = "__muldf3";
Names[RTLIB::MUL_F80] = "__mulxf3";
Names[RTLIB::MUL_F128] = "__multf3";
Names[RTLIB::MUL_PPCF128] = "__gcc_qmul";
Names[RTLIB::DIV_F32] = "__divsf3";
Names[RTLIB::DIV_F64] = "__divdf3";
Names[RTLIB::DIV_F80] = "__divxf3";
Names[RTLIB::DIV_F128] = "__divtf3";
Names[RTLIB::DIV_PPCF128] = "__gcc_qdiv";
Names[RTLIB::REM_F32] = "fmodf";
Names[RTLIB::REM_F64] = "fmod";
Names[RTLIB::REM_F80] = "fmodl";
Names[RTLIB::REM_F128] = "fmodl";
Names[RTLIB::REM_PPCF128] = "fmodl";
Names[RTLIB::FMA_F32] = "fmaf";
Names[RTLIB::FMA_F64] = "fma";
Names[RTLIB::FMA_F80] = "fmal";
Names[RTLIB::FMA_F128] = "fmal";
Names[RTLIB::FMA_PPCF128] = "fmal";
Names[RTLIB::POWI_F32] = "__powisf2";
Names[RTLIB::POWI_F64] = "__powidf2";
Names[RTLIB::POWI_F80] = "__powixf2";
Names[RTLIB::POWI_F128] = "__powitf2";
Names[RTLIB::POWI_PPCF128] = "__powitf2";
Names[RTLIB::SQRT_F32] = "sqrtf";
Names[RTLIB::SQRT_F64] = "sqrt";
Names[RTLIB::SQRT_F80] = "sqrtl";
Names[RTLIB::SQRT_F128] = "sqrtl";
Names[RTLIB::SQRT_PPCF128] = "sqrtl";
Names[RTLIB::LOG_F32] = "logf";
Names[RTLIB::LOG_F64] = "log";
Names[RTLIB::LOG_F80] = "logl";
Names[RTLIB::LOG_F128] = "logl";
Names[RTLIB::LOG_PPCF128] = "logl";
Names[RTLIB::LOG2_F32] = "log2f";
Names[RTLIB::LOG2_F64] = "log2";
Names[RTLIB::LOG2_F80] = "log2l";
Names[RTLIB::LOG2_F128] = "log2l";
Names[RTLIB::LOG2_PPCF128] = "log2l";
Names[RTLIB::LOG10_F32] = "log10f";
Names[RTLIB::LOG10_F64] = "log10";
Names[RTLIB::LOG10_F80] = "log10l";
Names[RTLIB::LOG10_F128] = "log10l";
Names[RTLIB::LOG10_PPCF128] = "log10l";
Names[RTLIB::EXP_F32] = "expf";
Names[RTLIB::EXP_F64] = "exp";
Names[RTLIB::EXP_F80] = "expl";
Names[RTLIB::EXP_F128] = "expl";
Names[RTLIB::EXP_PPCF128] = "expl";
Names[RTLIB::EXP2_F32] = "exp2f";
Names[RTLIB::EXP2_F64] = "exp2";
Names[RTLIB::EXP2_F80] = "exp2l";
Names[RTLIB::EXP2_F128] = "exp2l";
Names[RTLIB::EXP2_PPCF128] = "exp2l";
Names[RTLIB::SIN_F32] = "sinf";
Names[RTLIB::SIN_F64] = "sin";
Names[RTLIB::SIN_F80] = "sinl";
Names[RTLIB::SIN_F128] = "sinl";
Names[RTLIB::SIN_PPCF128] = "sinl";
Names[RTLIB::COS_F32] = "cosf";
Names[RTLIB::COS_F64] = "cos";
Names[RTLIB::COS_F80] = "cosl";
Names[RTLIB::COS_F128] = "cosl";
Names[RTLIB::COS_PPCF128] = "cosl";
Names[RTLIB::POW_F32] = "powf";
Names[RTLIB::POW_F64] = "pow";
Names[RTLIB::POW_F80] = "powl";
Names[RTLIB::POW_F128] = "powl";
Names[RTLIB::POW_PPCF128] = "powl";
Names[RTLIB::CEIL_F32] = "ceilf";
Names[RTLIB::CEIL_F64] = "ceil";
Names[RTLIB::CEIL_F80] = "ceill";
Names[RTLIB::CEIL_F128] = "ceill";
Names[RTLIB::CEIL_PPCF128] = "ceill";
Names[RTLIB::TRUNC_F32] = "truncf";
Names[RTLIB::TRUNC_F64] = "trunc";
Names[RTLIB::TRUNC_F80] = "truncl";
Names[RTLIB::TRUNC_F128] = "truncl";
Names[RTLIB::TRUNC_PPCF128] = "truncl";
Names[RTLIB::RINT_F32] = "rintf";
Names[RTLIB::RINT_F64] = "rint";
Names[RTLIB::RINT_F80] = "rintl";
Names[RTLIB::RINT_F128] = "rintl";
Names[RTLIB::RINT_PPCF128] = "rintl";
Names[RTLIB::NEARBYINT_F32] = "nearbyintf";
Names[RTLIB::NEARBYINT_F64] = "nearbyint";
Names[RTLIB::NEARBYINT_F80] = "nearbyintl";
Names[RTLIB::NEARBYINT_F128] = "nearbyintl";
Names[RTLIB::NEARBYINT_PPCF128] = "nearbyintl";
Add ISD::FROUND for libm round() All libm floating-point rounding functions, except for round(), had their own ISD nodes. Recent PowerPC cores have an instruction for round(), and so here I'm adding ISD::FROUND so that round() can be custom lowered as well. For the most part, this is straightforward. I've added an intrinsic and a matching ISD node just like those for nearbyint() and friends. The SelectionDAG pattern I've named frnd (because ISD::FP_ROUND has already claimed fround). This will be used by the PowerPC backend in a follow-up commit. llvm-svn: 187926
2013-08-08 06:49:12 +08:00
Names[RTLIB::ROUND_F32] = "roundf";
Names[RTLIB::ROUND_F64] = "round";
Names[RTLIB::ROUND_F80] = "roundl";
Names[RTLIB::ROUND_F128] = "roundl";
Names[RTLIB::ROUND_PPCF128] = "roundl";
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
Names[RTLIB::FLOOR_F32] = "floorf";
Names[RTLIB::FLOOR_F64] = "floor";
Names[RTLIB::FLOOR_F80] = "floorl";
Names[RTLIB::FLOOR_F128] = "floorl";
Names[RTLIB::FLOOR_PPCF128] = "floorl";
Add minnum / maxnum codegen llvm-svn: 220342
2014-10-22 07:01:01 +08:00
Names[RTLIB::FMIN_F32] = "fminf";
Names[RTLIB::FMIN_F64] = "fmin";
Names[RTLIB::FMIN_F80] = "fminl";
Names[RTLIB::FMIN_F128] = "fminl";
Names[RTLIB::FMIN_PPCF128] = "fminl";
Names[RTLIB::FMAX_F32] = "fmaxf";
Names[RTLIB::FMAX_F64] = "fmax";
Names[RTLIB::FMAX_F80] = "fmaxl";
Names[RTLIB::FMAX_F128] = "fmaxl";
Names[RTLIB::FMAX_PPCF128] = "fmaxl";
CodeGen: add sensible defaults for the ISD::FROUND operation Some exotic types didn't know how to handle FROUND, which ARM64 uses. llvm-svn: 205088
2014-03-29 17:03:18 +08:00
Names[RTLIB::ROUND_F32] = "roundf";
Names[RTLIB::ROUND_F64] = "round";
Names[RTLIB::ROUND_F80] = "roundl";
Names[RTLIB::ROUND_F128] = "roundl";
Names[RTLIB::ROUND_PPCF128] = "roundl";
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
Names[RTLIB::COPYSIGN_F32] = "copysignf";
Names[RTLIB::COPYSIGN_F64] = "copysign";
Names[RTLIB::COPYSIGN_F80] = "copysignl";
Names[RTLIB::COPYSIGN_F128] = "copysignl";
Names[RTLIB::COPYSIGN_PPCF128] = "copysignl";
Names[RTLIB::FPEXT_F64_F128] = "__extenddftf2";
Names[RTLIB::FPEXT_F32_F128] = "__extendsftf2";
Names[RTLIB::FPEXT_F32_F64] = "__extendsfdf2";
Names[RTLIB::FPEXT_F16_F32] = "__gnu_h2f_ieee";
Names[RTLIB::FPROUND_F32_F16] = "__gnu_f2h_ieee";
CodeGen: generate single libcall for fptrunc -> f16 operations. Previously we asserted on this code. Currently compiler-rt doesn't actually implement any of these new libcalls, but external help is pretty much the only viable option for LLVM. I've followed the much more generic "__truncST2" naming, as opposed to the odd name for f32 -> f16 truncation. This can obviously be changed later, or overridden by any targets that need to. llvm-svn: 213252
2014-07-17 19:12:12 +08:00
Names[RTLIB::FPROUND_F64_F16] = "__truncdfhf2";
Names[RTLIB::FPROUND_F80_F16] = "__truncxfhf2";
Names[RTLIB::FPROUND_F128_F16] = "__trunctfhf2";
Names[RTLIB::FPROUND_PPCF128_F16] = "__trunctfhf2";
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
Names[RTLIB::FPROUND_F64_F32] = "__truncdfsf2";
Names[RTLIB::FPROUND_F80_F32] = "__truncxfsf2";
Names[RTLIB::FPROUND_F128_F32] = "__trunctfsf2";
Names[RTLIB::FPROUND_PPCF128_F32] = "__trunctfsf2";
Names[RTLIB::FPROUND_F80_F64] = "__truncxfdf2";
Names[RTLIB::FPROUND_F128_F64] = "__trunctfdf2";
Names[RTLIB::FPROUND_PPCF128_F64] = "__trunctfdf2";
Names[RTLIB::FPTOSINT_F32_I8] = "__fixsfqi";
Names[RTLIB::FPTOSINT_F32_I16] = "__fixsfhi";
Names[RTLIB::FPTOSINT_F32_I32] = "__fixsfsi";
Names[RTLIB::FPTOSINT_F32_I64] = "__fixsfdi";
Names[RTLIB::FPTOSINT_F32_I128] = "__fixsfti";
Names[RTLIB::FPTOSINT_F64_I8] = "__fixdfqi";
Names[RTLIB::FPTOSINT_F64_I16] = "__fixdfhi";
Names[RTLIB::FPTOSINT_F64_I32] = "__fixdfsi";
Names[RTLIB::FPTOSINT_F64_I64] = "__fixdfdi";
Names[RTLIB::FPTOSINT_F64_I128] = "__fixdfti";
Names[RTLIB::FPTOSINT_F80_I32] = "__fixxfsi";
Names[RTLIB::FPTOSINT_F80_I64] = "__fixxfdi";
Names[RTLIB::FPTOSINT_F80_I128] = "__fixxfti";
Names[RTLIB::FPTOSINT_F128_I32] = "__fixtfsi";
Names[RTLIB::FPTOSINT_F128_I64] = "__fixtfdi";
Names[RTLIB::FPTOSINT_F128_I128] = "__fixtfti";
Names[RTLIB::FPTOSINT_PPCF128_I32] = "__fixtfsi";
Names[RTLIB::FPTOSINT_PPCF128_I64] = "__fixtfdi";
Names[RTLIB::FPTOSINT_PPCF128_I128] = "__fixtfti";
Names[RTLIB::FPTOUINT_F32_I8] = "__fixunssfqi";
Names[RTLIB::FPTOUINT_F32_I16] = "__fixunssfhi";
Names[RTLIB::FPTOUINT_F32_I32] = "__fixunssfsi";
Names[RTLIB::FPTOUINT_F32_I64] = "__fixunssfdi";
Names[RTLIB::FPTOUINT_F32_I128] = "__fixunssfti";
Names[RTLIB::FPTOUINT_F64_I8] = "__fixunsdfqi";
Names[RTLIB::FPTOUINT_F64_I16] = "__fixunsdfhi";
Names[RTLIB::FPTOUINT_F64_I32] = "__fixunsdfsi";
Names[RTLIB::FPTOUINT_F64_I64] = "__fixunsdfdi";
Names[RTLIB::FPTOUINT_F64_I128] = "__fixunsdfti";
Names[RTLIB::FPTOUINT_F80_I32] = "__fixunsxfsi";
Names[RTLIB::FPTOUINT_F80_I64] = "__fixunsxfdi";
Names[RTLIB::FPTOUINT_F80_I128] = "__fixunsxfti";
Names[RTLIB::FPTOUINT_F128_I32] = "__fixunstfsi";
Names[RTLIB::FPTOUINT_F128_I64] = "__fixunstfdi";
Names[RTLIB::FPTOUINT_F128_I128] = "__fixunstfti";
Names[RTLIB::FPTOUINT_PPCF128_I32] = "__fixunstfsi";
Names[RTLIB::FPTOUINT_PPCF128_I64] = "__fixunstfdi";
Names[RTLIB::FPTOUINT_PPCF128_I128] = "__fixunstfti";
Names[RTLIB::SINTTOFP_I32_F32] = "__floatsisf";
Names[RTLIB::SINTTOFP_I32_F64] = "__floatsidf";
Names[RTLIB::SINTTOFP_I32_F80] = "__floatsixf";
Names[RTLIB::SINTTOFP_I32_F128] = "__floatsitf";
Names[RTLIB::SINTTOFP_I32_PPCF128] = "__floatsitf";
Names[RTLIB::SINTTOFP_I64_F32] = "__floatdisf";
Names[RTLIB::SINTTOFP_I64_F64] = "__floatdidf";
Names[RTLIB::SINTTOFP_I64_F80] = "__floatdixf";
Names[RTLIB::SINTTOFP_I64_F128] = "__floatditf";
Names[RTLIB::SINTTOFP_I64_PPCF128] = "__floatditf";
Names[RTLIB::SINTTOFP_I128_F32] = "__floattisf";
Names[RTLIB::SINTTOFP_I128_F64] = "__floattidf";
Names[RTLIB::SINTTOFP_I128_F80] = "__floattixf";
Names[RTLIB::SINTTOFP_I128_F128] = "__floattitf";
Names[RTLIB::SINTTOFP_I128_PPCF128] = "__floattitf";
Names[RTLIB::UINTTOFP_I32_F32] = "__floatunsisf";
Names[RTLIB::UINTTOFP_I32_F64] = "__floatunsidf";
Names[RTLIB::UINTTOFP_I32_F80] = "__floatunsixf";
Names[RTLIB::UINTTOFP_I32_F128] = "__floatunsitf";
Names[RTLIB::UINTTOFP_I32_PPCF128] = "__floatunsitf";
Names[RTLIB::UINTTOFP_I64_F32] = "__floatundisf";
Names[RTLIB::UINTTOFP_I64_F64] = "__floatundidf";
Names[RTLIB::UINTTOFP_I64_F80] = "__floatundixf";
Names[RTLIB::UINTTOFP_I64_F128] = "__floatunditf";
Names[RTLIB::UINTTOFP_I64_PPCF128] = "__floatunditf";
Names[RTLIB::UINTTOFP_I128_F32] = "__floatuntisf";
Names[RTLIB::UINTTOFP_I128_F64] = "__floatuntidf";
Names[RTLIB::UINTTOFP_I128_F80] = "__floatuntixf";
Names[RTLIB::UINTTOFP_I128_F128] = "__floatuntitf";
Names[RTLIB::UINTTOFP_I128_PPCF128] = "__floatuntitf";
Names[RTLIB::OEQ_F32] = "__eqsf2";
Names[RTLIB::OEQ_F64] = "__eqdf2";
Names[RTLIB::OEQ_F128] = "__eqtf2";
Names[RTLIB::UNE_F32] = "__nesf2";
Names[RTLIB::UNE_F64] = "__nedf2";
Names[RTLIB::UNE_F128] = "__netf2";
Names[RTLIB::OGE_F32] = "__gesf2";
Names[RTLIB::OGE_F64] = "__gedf2";
Names[RTLIB::OGE_F128] = "__getf2";
Names[RTLIB::OLT_F32] = "__ltsf2";
Names[RTLIB::OLT_F64] = "__ltdf2";
Names[RTLIB::OLT_F128] = "__lttf2";
Names[RTLIB::OLE_F32] = "__lesf2";
Names[RTLIB::OLE_F64] = "__ledf2";
Names[RTLIB::OLE_F128] = "__letf2";
Names[RTLIB::OGT_F32] = "__gtsf2";
Names[RTLIB::OGT_F64] = "__gtdf2";
Names[RTLIB::OGT_F128] = "__gttf2";
Names[RTLIB::UO_F32] = "__unordsf2";
Names[RTLIB::UO_F64] = "__unorddf2";
Names[RTLIB::UO_F128] = "__unordtf2";
Names[RTLIB::O_F32] = "__unordsf2";
Names[RTLIB::O_F64] = "__unorddf2";
Names[RTLIB::O_F128] = "__unordtf2";
Names[RTLIB::MEMCPY] = "memcpy";
Names[RTLIB::MEMMOVE] = "memmove";
Names[RTLIB::MEMSET] = "memset";
Names[RTLIB::UNWIND_RESUME] = "_Unwind_Resume";
Names[RTLIB::SYNC_VAL_COMPARE_AND_SWAP_1] = "__sync_val_compare_and_swap_1";
Names[RTLIB::SYNC_VAL_COMPARE_AND_SWAP_2] = "__sync_val_compare_and_swap_2";
Names[RTLIB::SYNC_VAL_COMPARE_AND_SWAP_4] = "__sync_val_compare_and_swap_4";
Names[RTLIB::SYNC_VAL_COMPARE_AND_SWAP_8] = "__sync_val_compare_and_swap_8";
CodeGen: Emit a libcall if the target doesn't support 16-byte wide atomics There are targets that support i128 sized scalars but cannot emit instructions that modify them directly. The proper thing to do is to emit a libcall. This fixes PR17481. llvm-svn: 192957
2013-10-18 16:03:43 +08:00
Names[RTLIB::SYNC_VAL_COMPARE_AND_SWAP_16] = "__sync_val_compare_and_swap_16";
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
Names[RTLIB::SYNC_LOCK_TEST_AND_SET_1] = "__sync_lock_test_and_set_1";
Names[RTLIB::SYNC_LOCK_TEST_AND_SET_2] = "__sync_lock_test_and_set_2";
Names[RTLIB::SYNC_LOCK_TEST_AND_SET_4] = "__sync_lock_test_and_set_4";
Names[RTLIB::SYNC_LOCK_TEST_AND_SET_8] = "__sync_lock_test_and_set_8";
CodeGen: Emit a libcall if the target doesn't support 16-byte wide atomics There are targets that support i128 sized scalars but cannot emit instructions that modify them directly. The proper thing to do is to emit a libcall. This fixes PR17481. llvm-svn: 192957
2013-10-18 16:03:43 +08:00
Names[RTLIB::SYNC_LOCK_TEST_AND_SET_16] = "__sync_lock_test_and_set_16";
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
Names[RTLIB::SYNC_FETCH_AND_ADD_1] = "__sync_fetch_and_add_1";
Names[RTLIB::SYNC_FETCH_AND_ADD_2] = "__sync_fetch_and_add_2";
Names[RTLIB::SYNC_FETCH_AND_ADD_4] = "__sync_fetch_and_add_4";
Names[RTLIB::SYNC_FETCH_AND_ADD_8] = "__sync_fetch_and_add_8";
CodeGen: Emit a libcall if the target doesn't support 16-byte wide atomics There are targets that support i128 sized scalars but cannot emit instructions that modify them directly. The proper thing to do is to emit a libcall. This fixes PR17481. llvm-svn: 192957
2013-10-18 16:03:43 +08:00
Names[RTLIB::SYNC_FETCH_AND_ADD_16] = "__sync_fetch_and_add_16";
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
Names[RTLIB::SYNC_FETCH_AND_SUB_1] = "__sync_fetch_and_sub_1";
Names[RTLIB::SYNC_FETCH_AND_SUB_2] = "__sync_fetch_and_sub_2";
Names[RTLIB::SYNC_FETCH_AND_SUB_4] = "__sync_fetch_and_sub_4";
Names[RTLIB::SYNC_FETCH_AND_SUB_8] = "__sync_fetch_and_sub_8";
CodeGen: Emit a libcall if the target doesn't support 16-byte wide atomics There are targets that support i128 sized scalars but cannot emit instructions that modify them directly. The proper thing to do is to emit a libcall. This fixes PR17481. llvm-svn: 192957
2013-10-18 16:03:43 +08:00
Names[RTLIB::SYNC_FETCH_AND_SUB_16] = "__sync_fetch_and_sub_16";
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
Names[RTLIB::SYNC_FETCH_AND_AND_1] = "__sync_fetch_and_and_1";
Names[RTLIB::SYNC_FETCH_AND_AND_2] = "__sync_fetch_and_and_2";
Names[RTLIB::SYNC_FETCH_AND_AND_4] = "__sync_fetch_and_and_4";
Names[RTLIB::SYNC_FETCH_AND_AND_8] = "__sync_fetch_and_and_8";
CodeGen: Emit a libcall if the target doesn't support 16-byte wide atomics There are targets that support i128 sized scalars but cannot emit instructions that modify them directly. The proper thing to do is to emit a libcall. This fixes PR17481. llvm-svn: 192957
2013-10-18 16:03:43 +08:00
Names[RTLIB::SYNC_FETCH_AND_AND_16] = "__sync_fetch_and_and_16";
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
Names[RTLIB::SYNC_FETCH_AND_OR_1] = "__sync_fetch_and_or_1";
Names[RTLIB::SYNC_FETCH_AND_OR_2] = "__sync_fetch_and_or_2";
Names[RTLIB::SYNC_FETCH_AND_OR_4] = "__sync_fetch_and_or_4";
Names[RTLIB::SYNC_FETCH_AND_OR_8] = "__sync_fetch_and_or_8";
CodeGen: Emit a libcall if the target doesn't support 16-byte wide atomics There are targets that support i128 sized scalars but cannot emit instructions that modify them directly. The proper thing to do is to emit a libcall. This fixes PR17481. llvm-svn: 192957
2013-10-18 16:03:43 +08:00
Names[RTLIB::SYNC_FETCH_AND_OR_16] = "__sync_fetch_and_or_16";
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
Names[RTLIB::SYNC_FETCH_AND_XOR_1] = "__sync_fetch_and_xor_1";
Names[RTLIB::SYNC_FETCH_AND_XOR_2] = "__sync_fetch_and_xor_2";
Names[RTLIB::SYNC_FETCH_AND_XOR_4] = "__sync_fetch_and_xor_4";
Names[RTLIB::SYNC_FETCH_AND_XOR_8] = "__sync_fetch_and_xor_8";
CodeGen: Emit a libcall if the target doesn't support 16-byte wide atomics There are targets that support i128 sized scalars but cannot emit instructions that modify them directly. The proper thing to do is to emit a libcall. This fixes PR17481. llvm-svn: 192957
2013-10-18 16:03:43 +08:00
Names[RTLIB::SYNC_FETCH_AND_XOR_16] = "__sync_fetch_and_xor_16";
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
Names[RTLIB::SYNC_FETCH_AND_NAND_1] = "__sync_fetch_and_nand_1";
Names[RTLIB::SYNC_FETCH_AND_NAND_2] = "__sync_fetch_and_nand_2";
Names[RTLIB::SYNC_FETCH_AND_NAND_4] = "__sync_fetch_and_nand_4";
Names[RTLIB::SYNC_FETCH_AND_NAND_8] = "__sync_fetch_and_nand_8";
CodeGen: Emit a libcall if the target doesn't support 16-byte wide atomics There are targets that support i128 sized scalars but cannot emit instructions that modify them directly. The proper thing to do is to emit a libcall. This fixes PR17481. llvm-svn: 192957
2013-10-18 16:03:43 +08:00
Names[RTLIB::SYNC_FETCH_AND_NAND_16] = "__sync_fetch_and_nand_16";
LegalizeDAG: allow libcalls for max/min atomic operations ARM processors without ldrex/strex need to be able to make libcalls for all atomic operations, including the newer min/max versions. The alternative would probably be expanding these operations in terms of cmpxchg (as x86 does always), but in the configurations where this matters code-size tends to be paramount so the libcall is more desirable. llvm-svn: 193398
2013-10-25 17:30:20 +08:00
Names[RTLIB::SYNC_FETCH_AND_MAX_1] = "__sync_fetch_and_max_1";
Names[RTLIB::SYNC_FETCH_AND_MAX_2] = "__sync_fetch_and_max_2";
Names[RTLIB::SYNC_FETCH_AND_MAX_4] = "__sync_fetch_and_max_4";
Names[RTLIB::SYNC_FETCH_AND_MAX_8] = "__sync_fetch_and_max_8";
Names[RTLIB::SYNC_FETCH_AND_MAX_16] = "__sync_fetch_and_max_16";
Names[RTLIB::SYNC_FETCH_AND_UMAX_1] = "__sync_fetch_and_umax_1";
Names[RTLIB::SYNC_FETCH_AND_UMAX_2] = "__sync_fetch_and_umax_2";
Names[RTLIB::SYNC_FETCH_AND_UMAX_4] = "__sync_fetch_and_umax_4";
Names[RTLIB::SYNC_FETCH_AND_UMAX_8] = "__sync_fetch_and_umax_8";
Names[RTLIB::SYNC_FETCH_AND_UMAX_16] = "__sync_fetch_and_umax_16";
Names[RTLIB::SYNC_FETCH_AND_MIN_1] = "__sync_fetch_and_min_1";
Names[RTLIB::SYNC_FETCH_AND_MIN_2] = "__sync_fetch_and_min_2";
Names[RTLIB::SYNC_FETCH_AND_MIN_4] = "__sync_fetch_and_min_4";
Names[RTLIB::SYNC_FETCH_AND_MIN_8] = "__sync_fetch_and_min_8";
Names[RTLIB::SYNC_FETCH_AND_MIN_16] = "__sync_fetch_and_min_16";
Names[RTLIB::SYNC_FETCH_AND_UMIN_1] = "__sync_fetch_and_umin_1";
Names[RTLIB::SYNC_FETCH_AND_UMIN_2] = "__sync_fetch_and_umin_2";
Names[RTLIB::SYNC_FETCH_AND_UMIN_4] = "__sync_fetch_and_umin_4";
Names[RTLIB::SYNC_FETCH_AND_UMIN_8] = "__sync_fetch_and_umin_8";
Names[RTLIB::SYNC_FETCH_AND_UMIN_16] = "__sync_fetch_and_umin_16";
Teach SDISel to combine fsin / fcos into a fsincos node if the following conditions are met: 1. They share the same operand and are in the same BB. 2. Both outputs are used. 3. The target has a native instruction that maps to ISD::FSINCOS node or the target provides a sincos library call. Implemented the generic optimization in sdisel and enabled it for Mac OSX. Also added an additional optimization for x86_64 Mac OSX by using an alternative entry point __sincos_stret which returns the two results in xmm0 / xmm1. rdar://13087969 PR13204 llvm-svn: 173755
2013-01-29 10:32:37 +08:00
InitLibcallNames can take a Triple instead of a TargetMachine. llvm-svn: 210045
2014-06-03 04:51:49 +08:00
if (TT.getEnvironment() == Triple::GNU) {
enable SDISel sincos optimization for GNU environments - add sincos to runtime library if target triple environment is GNU - added canCombineSinCosLibcall() which checks that sincos is in the RTL and if the environment is GNU then unsafe fpmath is enabled (required to preserve errno) - extended sincos-opt lit test Reviewed by: Hal Finkel llvm-svn: 175283
2013-02-16 02:45:18 +08:00
Names[RTLIB::SINCOS_F32] = "sincosf";
Names[RTLIB::SINCOS_F64] = "sincos";
Names[RTLIB::SINCOS_F80] = "sincosl";
Names[RTLIB::SINCOS_F128] = "sincosl";
Names[RTLIB::SINCOS_PPCF128] = "sincosl";
} else {
// These are generally not available.
[C++11] More 'nullptr' conversion. In some cases just using a boolean check instead of comparing to nullptr. llvm-svn: 206142
2014-04-14 08:51:57 +08:00
Names[RTLIB::SINCOS_F32] = nullptr;
Names[RTLIB::SINCOS_F64] = nullptr;
Names[RTLIB::SINCOS_F80] = nullptr;
Names[RTLIB::SINCOS_F128] = nullptr;
Names[RTLIB::SINCOS_PPCF128] = nullptr;
enable SDISel sincos optimization for GNU environments - add sincos to runtime library if target triple environment is GNU - added canCombineSinCosLibcall() which checks that sincos is in the RTL and if the environment is GNU then unsafe fpmath is enabled (required to preserve errno) - extended sincos-opt lit test Reviewed by: Hal Finkel llvm-svn: 175283
2013-02-16 02:45:18 +08:00
}
[stackprotector] Add in the stackprotector libcall. We support this libcall on all platforms except for OpenBSD (See lib/Codegen/StackProtector.cpp). llvm-svn: 188193
2013-08-13 02:45:38 +08:00
Target triple OS detection tidyup. NFC Use Triple::isOS*() helpers where possible. llvm-svn: 222960
2014-11-30 03:18:21 +08:00
if (!TT.isOSOpenBSD()) {
[stackprotector] Add in the stackprotector libcall. We support this libcall on all platforms except for OpenBSD (See lib/Codegen/StackProtector.cpp). llvm-svn: 188193
2013-08-13 02:45:38 +08:00
Names[RTLIB::STACKPROTECTOR_CHECK_FAIL] = "__stack_chk_fail";
} else {
// These are generally not available.
[C++11] More 'nullptr' conversion. In some cases just using a boolean check instead of comparing to nullptr. llvm-svn: 206142
2014-04-14 08:51:57 +08:00
Names[RTLIB::STACKPROTECTOR_CHECK_FAIL] = nullptr;
[stackprotector] Add in the stackprotector libcall. We support this libcall on all platforms except for OpenBSD (See lib/Codegen/StackProtector.cpp). llvm-svn: 188193
2013-08-13 02:45:38 +08:00
}
[CodeGen] Use standard -not gnueabi- naming for f16 libcalls on Darwin. Other targets probably should as well. Since r237161, compiler-rt has both, but I don't see why anything other than gnueabi would use a gnueabi naming scheme. llvm-svn: 237324
2015-05-14 09:00:51 +08:00
// For f16/f32 conversions, Darwin uses the standard naming scheme, instead
// of the gnueabi-style __gnu_*_ieee.
// FIXME: What about other targets?
if (TT.isOSDarwin()) {
Names[RTLIB::FPEXT_F16_F32] = "__extendhfsf2";
Names[RTLIB::FPROUND_F32_F16] = "__truncsfhf2";
}
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
}
/// InitLibcallCallingConvs - Set default libcall CallingConvs.
///
static void InitLibcallCallingConvs(CallingConv::ID *CCs) {
for (int i = 0; i < RTLIB::UNKNOWN_LIBCALL; ++i) {
CCs[i] = CallingConv::C;
}
}
/// getFPEXT - Return the FPEXT_*_* value for the given types, or
/// UNKNOWN_LIBCALL if there is none.
RTLIB::Libcall RTLIB::getFPEXT(EVT OpVT, EVT RetVT) {
CodeGen: emit IR-level f16 conversion intrinsics as fptrunc/fpext This makes the first stage DAG for @llvm.convert.to.fp16 an fptrunc, and correspondingly @llvm.convert.from.fp16 an fpext. The legalisation path is now uniform, regardless of the input IR: fptrunc -> FP_TO_FP16 (if f16 illegal) -> libcall fpext -> FP16_TO_FP (if f16 illegal) -> libcall Each target should be able to select the version that best matches its operations and not be required to duplicate patterns for both fptrunc and FP_TO_FP16 (for example). As a result we can remove some redundant AArch64 patterns. llvm-svn: 213507
2014-07-21 17:13:56 +08:00
if (OpVT == MVT::f16) {
if (RetVT == MVT::f32)
return FPEXT_F16_F32;
} else if (OpVT == MVT::f32) {
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
if (RetVT == MVT::f64)
return FPEXT_F32_F64;
if (RetVT == MVT::f128)
return FPEXT_F32_F128;
} else if (OpVT == MVT::f64) {
if (RetVT == MVT::f128)
return FPEXT_F64_F128;
}
return UNKNOWN_LIBCALL;
}
/// getFPROUND - Return the FPROUND_*_* value for the given types, or
/// UNKNOWN_LIBCALL if there is none.
RTLIB::Libcall RTLIB::getFPROUND(EVT OpVT, EVT RetVT) {
CodeGen: generate single libcall for fptrunc -> f16 operations. Previously we asserted on this code. Currently compiler-rt doesn't actually implement any of these new libcalls, but external help is pretty much the only viable option for LLVM. I've followed the much more generic "__truncST2" naming, as opposed to the odd name for f32 -> f16 truncation. This can obviously be changed later, or overridden by any targets that need to. llvm-svn: 213252
2014-07-17 19:12:12 +08:00
if (RetVT == MVT::f16) {
if (OpVT == MVT::f32)
return FPROUND_F32_F16;
if (OpVT == MVT::f64)
return FPROUND_F64_F16;
if (OpVT == MVT::f80)
return FPROUND_F80_F16;
if (OpVT == MVT::f128)
return FPROUND_F128_F16;
if (OpVT == MVT::ppcf128)
return FPROUND_PPCF128_F16;
} else if (RetVT == MVT::f32) {
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
if (OpVT == MVT::f64)
return FPROUND_F64_F32;
if (OpVT == MVT::f80)
return FPROUND_F80_F32;
if (OpVT == MVT::f128)
return FPROUND_F128_F32;
if (OpVT == MVT::ppcf128)
return FPROUND_PPCF128_F32;
} else if (RetVT == MVT::f64) {
if (OpVT == MVT::f80)
return FPROUND_F80_F64;
if (OpVT == MVT::f128)
return FPROUND_F128_F64;
if (OpVT == MVT::ppcf128)
return FPROUND_PPCF128_F64;
}
return UNKNOWN_LIBCALL;
}
/// getFPTOSINT - Return the FPTOSINT_*_* value for the given types, or
/// UNKNOWN_LIBCALL if there is none.
RTLIB::Libcall RTLIB::getFPTOSINT(EVT OpVT, EVT RetVT) {
if (OpVT == MVT::f32) {
if (RetVT == MVT::i8)
return FPTOSINT_F32_I8;
if (RetVT == MVT::i16)
return FPTOSINT_F32_I16;
if (RetVT == MVT::i32)
return FPTOSINT_F32_I32;
if (RetVT == MVT::i64)
return FPTOSINT_F32_I64;
if (RetVT == MVT::i128)
return FPTOSINT_F32_I128;
} else if (OpVT == MVT::f64) {
if (RetVT == MVT::i8)
return FPTOSINT_F64_I8;
if (RetVT == MVT::i16)
return FPTOSINT_F64_I16;
if (RetVT == MVT::i32)
return FPTOSINT_F64_I32;
if (RetVT == MVT::i64)
return FPTOSINT_F64_I64;
if (RetVT == MVT::i128)
return FPTOSINT_F64_I128;
} else if (OpVT == MVT::f80) {
if (RetVT == MVT::i32)
return FPTOSINT_F80_I32;
if (RetVT == MVT::i64)
return FPTOSINT_F80_I64;
if (RetVT == MVT::i128)
return FPTOSINT_F80_I128;
} else if (OpVT == MVT::f128) {
if (RetVT == MVT::i32)
return FPTOSINT_F128_I32;
if (RetVT == MVT::i64)
return FPTOSINT_F128_I64;
if (RetVT == MVT::i128)
return FPTOSINT_F128_I128;
} else if (OpVT == MVT::ppcf128) {
if (RetVT == MVT::i32)
return FPTOSINT_PPCF128_I32;
if (RetVT == MVT::i64)
return FPTOSINT_PPCF128_I64;
if (RetVT == MVT::i128)
return FPTOSINT_PPCF128_I128;
}
return UNKNOWN_LIBCALL;
}
/// getFPTOUINT - Return the FPTOUINT_*_* value for the given types, or
/// UNKNOWN_LIBCALL if there is none.
RTLIB::Libcall RTLIB::getFPTOUINT(EVT OpVT, EVT RetVT) {
if (OpVT == MVT::f32) {
if (RetVT == MVT::i8)
return FPTOUINT_F32_I8;
if (RetVT == MVT::i16)
return FPTOUINT_F32_I16;
if (RetVT == MVT::i32)
return FPTOUINT_F32_I32;
if (RetVT == MVT::i64)
return FPTOUINT_F32_I64;
if (RetVT == MVT::i128)
return FPTOUINT_F32_I128;
} else if (OpVT == MVT::f64) {
if (RetVT == MVT::i8)
return FPTOUINT_F64_I8;
if (RetVT == MVT::i16)
return FPTOUINT_F64_I16;
if (RetVT == MVT::i32)
return FPTOUINT_F64_I32;
if (RetVT == MVT::i64)
return FPTOUINT_F64_I64;
if (RetVT == MVT::i128)
return FPTOUINT_F64_I128;
} else if (OpVT == MVT::f80) {
if (RetVT == MVT::i32)
return FPTOUINT_F80_I32;
if (RetVT == MVT::i64)
return FPTOUINT_F80_I64;
if (RetVT == MVT::i128)
return FPTOUINT_F80_I128;
} else if (OpVT == MVT::f128) {
if (RetVT == MVT::i32)
return FPTOUINT_F128_I32;
if (RetVT == MVT::i64)
return FPTOUINT_F128_I64;
if (RetVT == MVT::i128)
return FPTOUINT_F128_I128;
} else if (OpVT == MVT::ppcf128) {
if (RetVT == MVT::i32)
return FPTOUINT_PPCF128_I32;
if (RetVT == MVT::i64)
return FPTOUINT_PPCF128_I64;
if (RetVT == MVT::i128)
return FPTOUINT_PPCF128_I128;
}
return UNKNOWN_LIBCALL;
}
/// getSINTTOFP - Return the SINTTOFP_*_* value for the given types, or
/// UNKNOWN_LIBCALL if there is none.
RTLIB::Libcall RTLIB::getSINTTOFP(EVT OpVT, EVT RetVT) {
if (OpVT == MVT::i32) {
if (RetVT == MVT::f32)
return SINTTOFP_I32_F32;
if (RetVT == MVT::f64)
return SINTTOFP_I32_F64;
if (RetVT == MVT::f80)
return SINTTOFP_I32_F80;
if (RetVT == MVT::f128)
return SINTTOFP_I32_F128;
if (RetVT == MVT::ppcf128)
return SINTTOFP_I32_PPCF128;
} else if (OpVT == MVT::i64) {
if (RetVT == MVT::f32)
return SINTTOFP_I64_F32;
if (RetVT == MVT::f64)
return SINTTOFP_I64_F64;
if (RetVT == MVT::f80)
return SINTTOFP_I64_F80;
if (RetVT == MVT::f128)
return SINTTOFP_I64_F128;
if (RetVT == MVT::ppcf128)
return SINTTOFP_I64_PPCF128;
} else if (OpVT == MVT::i128) {
if (RetVT == MVT::f32)
return SINTTOFP_I128_F32;
if (RetVT == MVT::f64)
return SINTTOFP_I128_F64;
if (RetVT == MVT::f80)
return SINTTOFP_I128_F80;
if (RetVT == MVT::f128)
return SINTTOFP_I128_F128;
if (RetVT == MVT::ppcf128)
return SINTTOFP_I128_PPCF128;
}
return UNKNOWN_LIBCALL;
}
/// getUINTTOFP - Return the UINTTOFP_*_* value for the given types, or
/// UNKNOWN_LIBCALL if there is none.
RTLIB::Libcall RTLIB::getUINTTOFP(EVT OpVT, EVT RetVT) {
if (OpVT == MVT::i32) {
if (RetVT == MVT::f32)
return UINTTOFP_I32_F32;
if (RetVT == MVT::f64)
return UINTTOFP_I32_F64;
if (RetVT == MVT::f80)
return UINTTOFP_I32_F80;
if (RetVT == MVT::f128)
return UINTTOFP_I32_F128;
if (RetVT == MVT::ppcf128)
return UINTTOFP_I32_PPCF128;
} else if (OpVT == MVT::i64) {
if (RetVT == MVT::f32)
return UINTTOFP_I64_F32;
if (RetVT == MVT::f64)
return UINTTOFP_I64_F64;
if (RetVT == MVT::f80)
return UINTTOFP_I64_F80;
if (RetVT == MVT::f128)
return UINTTOFP_I64_F128;
if (RetVT == MVT::ppcf128)
return UINTTOFP_I64_PPCF128;
} else if (OpVT == MVT::i128) {
if (RetVT == MVT::f32)
return UINTTOFP_I128_F32;
if (RetVT == MVT::f64)
return UINTTOFP_I128_F64;
if (RetVT == MVT::f80)
return UINTTOFP_I128_F80;
if (RetVT == MVT::f128)
return UINTTOFP_I128_F128;
if (RetVT == MVT::ppcf128)
return UINTTOFP_I128_PPCF128;
}
return UNKNOWN_LIBCALL;
}
SDAG: Merge the meat of two ExpandAtomic implementations. The copies already diverged, don't let them become any worse. Reduce redundancy in code with a little macro metaprogramming. llvm-svn: 231401
2015-03-06 04:04:29 +08:00
RTLIB::Libcall RTLIB::getATOMIC(unsigned Opc, MVT VT) {
#define OP_TO_LIBCALL(Name, Enum) \
case Name: \
switch (VT.SimpleTy) { \
default: \
return UNKNOWN_LIBCALL; \
case MVT::i8: \
return Enum##_1; \
case MVT::i16: \
return Enum##_2; \
case MVT::i32: \
return Enum##_4; \
case MVT::i64: \
return Enum##_8; \
case MVT::i128: \
return Enum##_16; \
}
switch (Opc) {
OP_TO_LIBCALL(ISD::ATOMIC_SWAP, SYNC_LOCK_TEST_AND_SET)
OP_TO_LIBCALL(ISD::ATOMIC_CMP_SWAP, SYNC_VAL_COMPARE_AND_SWAP)
OP_TO_LIBCALL(ISD::ATOMIC_LOAD_ADD, SYNC_FETCH_AND_ADD)
OP_TO_LIBCALL(ISD::ATOMIC_LOAD_SUB, SYNC_FETCH_AND_SUB)
OP_TO_LIBCALL(ISD::ATOMIC_LOAD_AND, SYNC_FETCH_AND_AND)
OP_TO_LIBCALL(ISD::ATOMIC_LOAD_OR, SYNC_FETCH_AND_OR)
OP_TO_LIBCALL(ISD::ATOMIC_LOAD_XOR, SYNC_FETCH_AND_XOR)
OP_TO_LIBCALL(ISD::ATOMIC_LOAD_NAND, SYNC_FETCH_AND_NAND)
OP_TO_LIBCALL(ISD::ATOMIC_LOAD_MAX, SYNC_FETCH_AND_MAX)
OP_TO_LIBCALL(ISD::ATOMIC_LOAD_UMAX, SYNC_FETCH_AND_UMAX)
OP_TO_LIBCALL(ISD::ATOMIC_LOAD_MIN, SYNC_FETCH_AND_MIN)
OP_TO_LIBCALL(ISD::ATOMIC_LOAD_UMIN, SYNC_FETCH_AND_UMIN)
}
#undef OP_TO_LIBCALL
return UNKNOWN_LIBCALL;
}
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
/// InitCmpLibcallCCs - Set default comparison libcall CC.
///
static void InitCmpLibcallCCs(ISD::CondCode *CCs) {
memset(CCs, ISD::SETCC_INVALID, sizeof(ISD::CondCode)*RTLIB::UNKNOWN_LIBCALL);
CCs[RTLIB::OEQ_F32] = ISD::SETEQ;
CCs[RTLIB::OEQ_F64] = ISD::SETEQ;
CCs[RTLIB::OEQ_F128] = ISD::SETEQ;
CCs[RTLIB::UNE_F32] = ISD::SETNE;
CCs[RTLIB::UNE_F64] = ISD::SETNE;
CCs[RTLIB::UNE_F128] = ISD::SETNE;
CCs[RTLIB::OGE_F32] = ISD::SETGE;
CCs[RTLIB::OGE_F64] = ISD::SETGE;
CCs[RTLIB::OGE_F128] = ISD::SETGE;
CCs[RTLIB::OLT_F32] = ISD::SETLT;
CCs[RTLIB::OLT_F64] = ISD::SETLT;
CCs[RTLIB::OLT_F128] = ISD::SETLT;
CCs[RTLIB::OLE_F32] = ISD::SETLE;
CCs[RTLIB::OLE_F64] = ISD::SETLE;
CCs[RTLIB::OLE_F128] = ISD::SETLE;
CCs[RTLIB::OGT_F32] = ISD::SETGT;
CCs[RTLIB::OGT_F64] = ISD::SETGT;
CCs[RTLIB::OGT_F128] = ISD::SETGT;
CCs[RTLIB::UO_F32] = ISD::SETNE;
CCs[RTLIB::UO_F64] = ISD::SETNE;
CCs[RTLIB::UO_F128] = ISD::SETNE;
CCs[RTLIB::O_F32] = ISD::SETEQ;
CCs[RTLIB::O_F64] = ISD::SETEQ;
CCs[RTLIB::O_F128] = ISD::SETEQ;
}
We can get the TLOF from the TargetMachine - so constructor no longer requires TargetLoweringObjectFile to be passed. llvm-svn: 221926
2014-11-14 05:29:21 +08:00
/// NOTE: The TargetMachine owns TLOF.
DataLayout is mandatory, update the API to reflect it with references. Summary: Now that the DataLayout is a mandatory part of the module, let's start cleaning the codebase. This patch is a first attempt at doing that. This patch is not exactly NFC as for instance some places were passing a nullptr instead of the DataLayout, possibly just because there was a default value on the DataLayout argument to many functions in the API. Even though it is not purely NFC, there is no change in the validation. I turned as many pointer to DataLayout to references, this helped figuring out all the places where a nullptr could come up. I had initially a local version of this patch broken into over 30 independant, commits but some later commit were cleaning the API and touching part of the code modified in the previous commits, so it seemed cleaner without the intermediate state. Test Plan: Reviewers: echristo Subscribers: llvm-commits From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 231740
2015-03-10 10:37:25 +08:00
TargetLoweringBase::TargetLoweringBase(const TargetMachine &tm) : TM(tm) {
Use the target options specified on a function to reset the back-end. During LTO, the target options on functions within the same Module may change. This would necessitate resetting some of the back-end. Do this for X86, because it's a Friday afternoon. llvm-svn: 178917
2013-04-06 05:52:40 +08:00
initActions();
// Perform these initializations only once.
MaxStoresPerMemset = MaxStoresPerMemcpy = MaxStoresPerMemmove = 8;
MaxStoresPerMemsetOptSize = MaxStoresPerMemcpyOptSize
= MaxStoresPerMemmoveOptSize = 4;
UseUnderscoreSetJmp = false;
UseUnderscoreLongJmp = false;
SelectIsExpensive = false;
Disable compare sinking in CodeGenPrepare when multiple condition registers are available As noted in the comment above CodeGenPrepare::OptimizeInst, which aggressively sinks compares to reduce pressure on the condition register(s), for targets such as PowerPC with multiple condition registers, this may not be the right thing to do. This adds an HasMultipleConditionRegisters boolean to TLI, and CodeGenPrepare::OptimizeInst is skipped when HasMultipleConditionRegisters is true. This functionality will be used by the PowerPC backend in an upcoming commit. Especially when the PowerPC backend starts tracking individual condition register bits as separate allocatable entities (which will happen in this upcoming commit), this sinking from CodeGenPrepare::OptimizeInst is significantly suboptimial. llvm-svn: 198354
2014-01-03 05:13:43 +08:00
HasMultipleConditionRegisters = false;
Set default value of HasExtractBitsInsn to false llvm-svn: 206803
2014-04-22 06:22:44 +08:00
HasExtractBitsInsn = false;
R600: Implement getRecipEstimate This requires a new hook to prevent expanding sqrt in terms of rsqrt and reciprocal. v_rcp_f32, v_rsq_f32, and v_sqrt_f32 are all the same rate, so this expansion would just double the number of instructions and cycles. llvm-svn: 225828
2015-01-14 04:53:23 +08:00
FsqrtIsCheap = false;
add a cl::opt override for TargetLoweringBase's JumpIsExpensive This patch is not intended to change existing codegen behavior for any target. It just exposes the JumpIsExpensive setting on the command-line to allow for easier testing and emergency overrides. Also, change the existing regression test to use FileCheck, explicitly specify the jump-is-expensive option, and use more precise checks. Differential Revision: http://reviews.llvm.org/D10846 llvm-svn: 241179
2015-07-02 02:10:20 +08:00
JumpIsExpensive = JumpIsExpensiveOverride;
Use the target options specified on a function to reset the back-end. During LTO, the target options on functions within the same Module may change. This would necessitate resetting some of the back-end. Do this for X86, because it's a Friday afternoon. llvm-svn: 178917
2013-04-06 05:52:40 +08:00
PredictableSelectIsExpensive = false;
CodeGenPrep: wrangle IR to exploit AArch64 tbz/tbnz inst. Given IR like: %bit = and %val, #imm-with-1-bit-set %tst = icmp %bit, 0 br i1 %tst, label %true, label %false some targets can emit just a single instruction (tbz/tbnz in the AArch64 case). However, with ISel acting at the basic-block level, all three instructions need to be together for this to be possible. This adds another transformation to CodeGenPrep to expose these opportunities, if targets opt in via the hook. llvm-svn: 205086
2014-03-29 16:22:29 +08:00
MaskAndBranchFoldingIsLegal = false;
[CodeGenPrepare] Reapply r224351 with a fix for the assertion failure: The type promotion helper does not support vector type, so when make such it does not kick in in such cases. Original commit message: [CodeGenPrepare] Move sign/zero extensions near loads using type promotion. This patch extends the optimization in CodeGenPrepare that moves a sign/zero extension near a load when the target can combine them. The optimization may promote any operations between the extension and the load to make that possible. Although this optimization may be beneficial for all targets, in particular AArch64, this is enabled for X86 only as I have not benchmarked it for other targets yet. ** Context ** Most targets feature extended loads, i.e., loads that perform a zero or sign extension for free. In that context it is interesting to expose such pattern in CodeGenPrepare so that the instruction selection pass can form such loads. Sometimes, this pattern is blocked because of instructions between the load and the extension. When those instructions are promotable to the extended type, we can expose this pattern. ** Motivating Example ** Let us consider an example: define void @foo(i8* %addr1, i32* %addr2, i8 %a, i32 %b) { %ld = load i8* %addr1 %zextld = zext i8 %ld to i32 %ld2 = load i32* %addr2 %add = add nsw i32 %ld2, %zextld %sextadd = sext i32 %add to i64 %zexta = zext i8 %a to i32 %addza = add nsw i32 %zexta, %zextld %sextaddza = sext i32 %addza to i64 %addb = add nsw i32 %b, %zextld %sextaddb = sext i32 %addb to i64 call void @dummy(i64 %sextadd, i64 %sextaddza, i64 %sextaddb) ret void } As it is, this IR generates the following assembly on x86_64: [...] movzbl (%rdi), %eax # zero-extended load movl (%rsi), %es # plain load addl %eax, %esi # 32-bit add movslq %esi, %rdi # sign extend the result of add movzbl %dl, %edx # zero extend the first argument addl %eax, %edx # 32-bit add movslq %edx, %rsi # sign extend the result of add addl %eax, %ecx # 32-bit add movslq %ecx, %rdx # sign extend the result of add [...] The throughput of this sequence is 7.45 cycles on Ivy Bridge according to IACA. Now, by promoting the additions to form more extended loads we would generate: [...] movzbl (%rdi), %eax # zero-extended load movslq (%rsi), %rdi # sign-extended load addq %rax, %rdi # 64-bit add movzbl %dl, %esi # zero extend the first argument addq %rax, %rsi # 64-bit add movslq %ecx, %rdx # sign extend the second argument addq %rax, %rdx # 64-bit add [...] The throughput of this sequence is 6.15 cycles on Ivy Bridge according to IACA. This kind of sequences happen a lot on code using 32-bit indexes on 64-bit architectures. Note: The throughput numbers are similar on Sandy Bridge and Haswell. ** Proposed Solution ** To avoid the penalty of all these sign/zero extensions, we merge them in the loads at the beginning of the chain of computation by promoting all the chain of computation on the extended type. The promotion is done if and only if we do not introduce new extensions, i.e., if we do not degrade the code quality. To achieve this, we extend the existing “move ext to load” optimization with the promotion mechanism introduced to match larger patterns for addressing mode (r200947). The idea of this extension is to perform the following transformation: ext(promotableInst1(...(promotableInstN(load)))) => promotedInst1(...(promotedInstN(ext(load)))) The promotion mechanism in that optimization is enabled by a new TargetLowering switch, which is off by default. In other words, by default, the optimization performs the “move ext to load” optimization as it was before this patch. ** Performance ** Configuration: x86_64: Ivy Bridge fixed at 2900MHz running OS X 10.10. Tested Optimization Levels: O3/Os Tests: llvm-testsuite + externals. Results: - No regression beside noise. - Improvements: CINT2006/473.astar: ~2% Benchmarks/PAQ8p: ~2% Misc/perlin: ~3% The results are consistent for both O3 and Os. <rdar://problem/18310086> llvm-svn: 224402
2014-12-17 09:36:17 +08:00
EnableExtLdPromotion = false;
Added a TLI hook to signal that the target does not have or does not care about floating point exceptions, added use of flag to fold potentially exception raising floating point math in selection DAG. No functionality change, as targets have to explicitly ask for this behavior and none does today. llvm-svn: 215222
2014-08-09 00:46:53 +08:00
HasFloatingPointExceptions = true;
Use the target options specified on a function to reset the back-end. During LTO, the target options on functions within the same Module may change. This would necessitate resetting some of the back-end. Do this for X86, because it's a Friday afternoon. llvm-svn: 178917
2013-04-06 05:52:40 +08:00
StackPointerRegisterToSaveRestore = 0;
ExceptionPointerRegister = 0;
ExceptionSelectorRegister = 0;
BooleanContents = UndefinedBooleanContent;
Make it possible for ints/floats to return different values from getBooleanContents() Summary: On MIPS32r6/MIPS64r6, floating point comparisons return 0 or -1 but integer comparisons return 0 or 1. Updated the various uses of getBooleanContents. Two simplifications had to be disabled when float and int boolean contents differ: - ScalarizeVecRes_VSELECT except when the kind of boolean contents is trivially discoverable (i.e. when the condition of the VSELECT is a SETCC node). - visitVSELECT (select C, 0, 1) -> (xor C, 1). Come to think of it, this one could test for the common case of 'C' being a SETCC too. Preserved existing behaviour for all other targets and updated the affected MIPS32r6/MIPS64r6 tests. This also fixes the pi benchmark where the 'low' variable was counting in the wrong direction because it thought it could simply add the result of the comparison. Reviewers: hfinkel Reviewed By: hfinkel Subscribers: hfinkel, jholewinski, mcrosier, llvm-commits Differential Revision: http://reviews.llvm.org/D4389 llvm-svn: 212697
2014-07-10 18:18:12 +08:00
BooleanFloatContents = UndefinedBooleanContent;
Use the target options specified on a function to reset the back-end. During LTO, the target options on functions within the same Module may change. This would necessitate resetting some of the back-end. Do this for X86, because it's a Friday afternoon. llvm-svn: 178917
2013-04-06 05:52:40 +08:00
BooleanVectorContents = UndefinedBooleanContent;
SchedPreferenceInfo = Sched::ILP;
JumpBufSize = 0;
JumpBufAlignment = 0;
MinFunctionAlignment = 0;
PrefFunctionAlignment = 0;
PrefLoopAlignment = 0;
MinStackArgumentAlignment = 1;
InsertFencesForAtomic = false;
MinimumJumpTableEntries = 4;
Eliminate additional redundant copies of Triple objects. NFC. Subscribers: rafael, llvm-commits, rengolin Differential Revision: http://reviews.llvm.org/D10654 llvm-svn: 240540
2015-06-24 21:25:57 +08:00
InitLibcallNames(LibcallRoutineNames, TM.getTargetTriple());
Use the target options specified on a function to reset the back-end. During LTO, the target options on functions within the same Module may change. This would necessitate resetting some of the back-end. Do this for X86, because it's a Friday afternoon. llvm-svn: 178917
2013-04-06 05:52:40 +08:00
InitCmpLibcallCCs(CmpLibcallCCs);
InitLibcallCallingConvs(LibcallCallingConvs);
}
void TargetLoweringBase::initActions() {
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
// All operations default to being supported.
memset(OpActions, 0, sizeof(OpActions));
memset(LoadExtActions, 0, sizeof(LoadExtActions));
memset(TruncStoreActions, 0, sizeof(TruncStoreActions));
memset(IndexedModeActions, 0, sizeof(IndexedModeActions));
memset(CondCodeActions, 0, sizeof(CondCodeActions));
Use the target options specified on a function to reset the back-end. During LTO, the target options on functions within the same Module may change. This would necessitate resetting some of the back-end. Do this for X86, because it's a Friday afternoon. llvm-svn: 178917
2013-04-06 05:52:40 +08:00
memset(RegClassForVT, 0,MVT::LAST_VALUETYPE*sizeof(TargetRegisterClass*));
memset(TargetDAGCombineArray, 0, array_lengthof(TargetDAGCombineArray));
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
// Set default actions for various operations.
[CodeGen] Use MVT iterator_ranges in legality loops. NFC intended. A few loops do trickier things than just iterating on an MVT subset, so I'll leave them be for now. Follow-up of r225387. llvm-svn: 225392
2015-01-08 05:27:10 +08:00
for (MVT VT : MVT::all_valuetypes()) {
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
// Default all indexed load / store to expand.
for (unsigned IM = (unsigned)ISD::PRE_INC;
IM != (unsigned)ISD::LAST_INDEXED_MODE; ++IM) {
[CodeGen] Use MVT iterator_ranges in legality loops. NFC intended. A few loops do trickier things than just iterating on an MVT subset, so I'll leave them be for now. Follow-up of r225387. llvm-svn: 225392
2015-01-08 05:27:10 +08:00
setIndexedLoadAction(IM, VT, Expand);
setIndexedStoreAction(IM, VT, Expand);
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
}
IR: add "cmpxchg weak" variant to support permitted failure. This commit adds a weak variant of the cmpxchg operation, as described in C++11. A cmpxchg instruction with this modifier is permitted to fail to store, even if the comparison indicated it should. As a result, cmpxchg instructions must return a flag indicating success in addition to their original iN value loaded. Thus, for uniformity *all* cmpxchg instructions now return "{ iN, i1 }". The second flag is 1 when the store succeeded. At the DAG level, a new ATOMIC_CMP_SWAP_WITH_SUCCESS node has been added as the natural representation for the new cmpxchg instructions. It is a strong cmpxchg. By default this gets Expanded to the existing ATOMIC_CMP_SWAP during Legalization, so existing backends should see no change in behaviour. If they wish to deal with the enhanced node instead, they can call setOperationAction on it. Beware: as a node with 2 results, it cannot be selected from TableGen. Currently, no use is made of the extra information provided in this patch. Test updates are almost entirely adapting the input IR to the new scheme. Summary for out of tree users: ------------------------------ + Legacy Bitcode files are upgraded during read. + Legacy assembly IR files will be invalid. + Front-ends must adapt to different type for "cmpxchg". + Backends should be unaffected by default. llvm-svn: 210903
2014-06-13 22:24:07 +08:00
// Most backends expect to see the node which just returns the value loaded.
[CodeGen] Use MVT iterator_ranges in legality loops. NFC intended. A few loops do trickier things than just iterating on an MVT subset, so I'll leave them be for now. Follow-up of r225387. llvm-svn: 225392
2015-01-08 05:27:10 +08:00
setOperationAction(ISD::ATOMIC_CMP_SWAP_WITH_SUCCESS, VT, Expand);
IR: add "cmpxchg weak" variant to support permitted failure. This commit adds a weak variant of the cmpxchg operation, as described in C++11. A cmpxchg instruction with this modifier is permitted to fail to store, even if the comparison indicated it should. As a result, cmpxchg instructions must return a flag indicating success in addition to their original iN value loaded. Thus, for uniformity *all* cmpxchg instructions now return "{ iN, i1 }". The second flag is 1 when the store succeeded. At the DAG level, a new ATOMIC_CMP_SWAP_WITH_SUCCESS node has been added as the natural representation for the new cmpxchg instructions. It is a strong cmpxchg. By default this gets Expanded to the existing ATOMIC_CMP_SWAP during Legalization, so existing backends should see no change in behaviour. If they wish to deal with the enhanced node instead, they can call setOperationAction on it. Beware: as a node with 2 results, it cannot be selected from TableGen. Currently, no use is made of the extra information provided in this patch. Test updates are almost entirely adapting the input IR to the new scheme. Summary for out of tree users: ------------------------------ + Legacy Bitcode files are upgraded during read. + Legacy assembly IR files will be invalid. + Front-ends must adapt to different type for "cmpxchg". + Backends should be unaffected by default. llvm-svn: 210903
2014-06-13 22:24:07 +08:00
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
// These operations default to expand.
[CodeGen] Use MVT iterator_ranges in legality loops. NFC intended. A few loops do trickier things than just iterating on an MVT subset, so I'll leave them be for now. Follow-up of r225387. llvm-svn: 225392
2015-01-08 05:27:10 +08:00
setOperationAction(ISD::FGETSIGN, VT, Expand);
setOperationAction(ISD::CONCAT_VECTORS, VT, Expand);
setOperationAction(ISD::FMINNUM, VT, Expand);
setOperationAction(ISD::FMAXNUM, VT, Expand);
Add new ISD nodes: ISD::FMINNAN and ISD::FMAXNAN The intention of these is to be a corollary to ISD::FMINNUM/FMAXNUM, differing only on how NaNs are treated. FMINNUM returns the non-NaN input (when given one NaN and one non-NaN), FMINNAN returns the NaN input instead. This patch includes support for scalarizing, widening and splitting vectors, but not expansion or softening. The reason is that these should never be needed - FMINNAN nodes are only going to be created in one place (SDAGBuilder::visitSelect) and there we'll check if the node is legal or custom. I could preemptively add expand and soften code, but I'm fairly opposed to adding code I can't test. It's bad enough I can't create tests with this patch, but at least this code will be exercised by the ARM and AArch64 backends fairly shortly. llvm-svn: 244581
2015-08-11 17:13:05 +08:00
setOperationAction(ISD::FMINNAN, VT, Expand);
setOperationAction(ISD::FMAXNAN, VT, Expand);
Add generic fmad DAG node. This allows sharing of FMA forming combines to work with instructions that have the same semantics as a separate multiply and add. This is expand by default, and only formed post legalization so it shouldn't have much impact on targets that do not want it. llvm-svn: 230070
2015-02-21 06:10:33 +08:00
setOperationAction(ISD::FMAD, VT, Expand);
Add SDNodes for umin, umax, smin and smax. This adds new SDNodes for signed/unsigned min/max. These nodes are built from select/icmp pairs matched at SDAGBuilder stage. This patch adds the nodes, as well as legalization support and sets them to be "expand" for all targets. NFC for now; this will be tested when I switch AArch64 to using these new nodes. llvm-svn: 237423
2015-05-15 17:03:15 +08:00
setOperationAction(ISD::SMIN, VT, Expand);
setOperationAction(ISD::SMAX, VT, Expand);
setOperationAction(ISD::UMIN, VT, Expand);
setOperationAction(ISD::UMAX, VT, Expand);
Set ISD::FROUND to Expand by default for all types For most libm ISD nodes, TargetLoweringBase::initActions sets the default scalar-type action to Expand, and leaves the vector-type action default as Legal. This is not appropriate for the new ISD::FROUND node (which no backend but PowerPC handles explicitly). Fixes PR16842. llvm-svn: 188048
2013-08-09 12:13:44 +08:00
CodeGen: Default overflow operations to expand so we don't have to assume targets are lying Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu> Reviewed-by: ab Differential Revision: http://reviews.llvm.org/D9265 llvm-svn: 236119
2015-04-30 00:30:46 +08:00
// Overflow operations default to expand
setOperationAction(ISD::SADDO, VT, Expand);
setOperationAction(ISD::SSUBO, VT, Expand);
setOperationAction(ISD::UADDO, VT, Expand);
setOperationAction(ISD::USUBO, VT, Expand);
setOperationAction(ISD::SMULO, VT, Expand);
setOperationAction(ISD::UMULO, VT, Expand);
[Codegen] Add intrinsics 'absdiff' and corresponding SDNodes for absolute difference operation This adds new intrinsics "*absdiff" for absolute difference ops to facilitate efficient code generation for "sum of absolute differences" operation. The patch also contains the introduction of corresponding SDNodes and basic legalization support.Sanity of the generated code is tested on X86. This is 1st of the three patches. Patch by Shahid Asghar-ahmad! llvm-svn: 242409
2015-07-16 23:22:46 +08:00
setOperationAction(ISD::UABSDIFF, VT, Expand);
setOperationAction(ISD::SABSDIFF, VT, Expand);
CodeGen: Default overflow operations to expand so we don't have to assume targets are lying Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu> Reviewed-by: ab Differential Revision: http://reviews.llvm.org/D9265 llvm-svn: 236119
2015-04-30 00:30:46 +08:00
Set ISD::FROUND to Expand by default for all types For most libm ISD nodes, TargetLoweringBase::initActions sets the default scalar-type action to Expand, and leaves the vector-type action default as Legal. This is not appropriate for the new ISD::FROUND node (which no backend but PowerPC handles explicitly). Fixes PR16842. llvm-svn: 188048
2013-08-09 12:13:44 +08:00
// These library functions default to expand.
[CodeGen] Use MVT iterator_ranges in legality loops. NFC intended. A few loops do trickier things than just iterating on an MVT subset, so I'll leave them be for now. Follow-up of r225387. llvm-svn: 225392
2015-01-08 05:27:10 +08:00
setOperationAction(ISD::FROUND, VT, Expand);
Add a llvm.copysign intrinsic This adds a llvm.copysign intrinsic; We already have Libfunc recognition for copysign (which is turned into the FCOPYSIGN SDAG node). In order to autovectorize calls to copysign in the loop vectorizer, we need a corresponding intrinsic as well. In addition to the expected changes to the language reference, the loop vectorizer, BasicTTI, and the SDAG builder (the intrinsic is transformed into an FCOPYSIGN node, just like the function call), this also adds FCOPYSIGN to a few lists in LegalizeVector{Ops,Types} so that vector copysigns can be expanded. In TargetLoweringBase::initActions, I've made the default action for FCOPYSIGN be Expand for vector types. This seems correct for all in-tree targets, and I think is the right thing to do because, previously, there was no way to generate vector-values FCOPYSIGN nodes (and most targets don't specify an action for vector-typed FCOPYSIGN). llvm-svn: 188728
2013-08-20 07:35:46 +08:00
// These operations default to expand for vector types.
[CodeGen] Use MVT iterator_ranges in legality loops. NFC intended. A few loops do trickier things than just iterating on an MVT subset, so I'll leave them be for now. Follow-up of r225387. llvm-svn: 225392
2015-01-08 05:27:10 +08:00
if (VT.isVector()) {
setOperationAction(ISD::FCOPYSIGN, VT, Expand);
setOperationAction(ISD::ANY_EXTEND_VECTOR_INREG, VT, Expand);
setOperationAction(ISD::SIGN_EXTEND_VECTOR_INREG, VT, Expand);
setOperationAction(ISD::ZERO_EXTEND_VECTOR_INREG, VT, Expand);
[SDAG] Make the new zext-vector-inreg node default to expand so targets don't need to set it manually. This is based on feedback from Tom who pointed out that if every target needs to handle this we need to reach out to those maintainers. In fact, it doesn't make sense to duplicate everything when anything other than expand seems unlikely at this stage. llvm-svn: 212661
2014-07-10 06:53:04 +08:00
}
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
}
// Most targets ignore the @llvm.prefetch intrinsic.
setOperationAction(ISD::PREFETCH, MVT::Other, Expand);
[CodeGen] Support (and default to) expanding READCYCLECOUNTER to 0. For targets that didn't support this, this will let us respect the langref instead of failing to select. Note that we don't need to change the 32-bit x86/PPC lowerings (to account for the result type/# difference) because they're both custom and bypass type legalization. llvm-svn: 246258
2015-08-28 09:49:59 +08:00
// Most targets also ignore the @llvm.readcyclecounter intrinsic.
setOperationAction(ISD::READCYCLECOUNTER, MVT::i64, Expand);
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
// ConstantFP nodes default to expand. Targets can either change this to
// Legal, in which case all fp constants are legal, or use isFPImmLegal()
// to optimize expansions for certain constants.
setOperationAction(ISD::ConstantFP, MVT::f16, Expand);
setOperationAction(ISD::ConstantFP, MVT::f32, Expand);
setOperationAction(ISD::ConstantFP, MVT::f64, Expand);
setOperationAction(ISD::ConstantFP, MVT::f80, Expand);
setOperationAction(ISD::ConstantFP, MVT::f128, Expand);
// These library functions default to expand.
Deduplicate a bunch of setOpActions into an MVT range-for. NFC. llvm-svn: 233330
2015-03-27 07:21:03 +08:00
for (MVT VT : {MVT::f32, MVT::f64, MVT::f128}) {
setOperationAction(ISD::FLOG , VT, Expand);
setOperationAction(ISD::FLOG2, VT, Expand);
setOperationAction(ISD::FLOG10, VT, Expand);
setOperationAction(ISD::FEXP , VT, Expand);
setOperationAction(ISD::FEXP2, VT, Expand);
setOperationAction(ISD::FFLOOR, VT, Expand);
setOperationAction(ISD::FMINNUM, VT, Expand);
setOperationAction(ISD::FMAXNUM, VT, Expand);
setOperationAction(ISD::FNEARBYINT, VT, Expand);
setOperationAction(ISD::FCEIL, VT, Expand);
setOperationAction(ISD::FRINT, VT, Expand);
setOperationAction(ISD::FTRUNC, VT, Expand);
setOperationAction(ISD::FROUND, VT, Expand);
}
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
// Default ISD::TRAP to expand (which turns it into abort).
setOperationAction(ISD::TRAP, MVT::Other, Expand);
// On most systems, DEBUGTRAP and TRAP have no difference. The "Expand"
// here is to inform DAG Legalizer to replace DEBUGTRAP with TRAP.
//
setOperationAction(ISD::DEBUGTRAP, MVT::Other, Expand);
}
Re-instate the EVT parameter to getScalarShiftAmountTy() for OOT user A documentation for this function would be nice by the way. From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 241807
2015-07-09 23:12:23 +08:00
MVT TargetLoweringBase::getScalarShiftAmountTy(const DataLayout &DL,
EVT) const {
Make TargetLowering::getShiftAmountTy() taking DataLayout as an argument Summary: This change is part of a series of commits dedicated to have a single DataLayout during compilation by using always the one owned by the module. Reviewers: echristo Subscribers: jholewinski, llvm-commits, rafael, yaron.keren Differential Revision: http://reviews.llvm.org/D11037 From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 241776
2015-07-09 10:09:20 +08:00
return MVT::getIntegerVT(8 * DL.getPointerSize(0));
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
}
Make TargetLowering::getShiftAmountTy() taking DataLayout as an argument Summary: This change is part of a series of commits dedicated to have a single DataLayout during compilation by using always the one owned by the module. Reviewers: echristo Subscribers: jholewinski, llvm-commits, rafael, yaron.keren Differential Revision: http://reviews.llvm.org/D11037 From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 241776
2015-07-09 10:09:20 +08:00
EVT TargetLoweringBase::getShiftAmountTy(EVT LHSTy,
const DataLayout &DL) const {
Fix PR10475 - ISD::SHL/SRL/SRA must have either both scalar or both vector operands but TLI.getShiftAmountTy() so far only return scalar type. As a result, backend logic assuming that breaks. - Rename the original TLI.getShiftAmountTy() to TLI.getScalarShiftAmountTy() and re-define TLI.getShiftAmountTy() to return target-specificed scalar type or the same vector type as the 1st operand. - Fix most TICG logic assuming TLI.getShiftAmountTy() a simple scalar type. llvm-svn: 176364
2013-03-02 02:40:30 +08:00
assert(LHSTy.isInteger() && "Shift amount is not an integer type!");
if (LHSTy.isVector())
return LHSTy;
Re-instate the EVT parameter to getScalarShiftAmountTy() for OOT user A documentation for this function would be nice by the way. From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 241807
2015-07-09 23:12:23 +08:00
return getScalarShiftAmountTy(DL, LHSTy);
Fix PR10475 - ISD::SHL/SRL/SRA must have either both scalar or both vector operands but TLI.getShiftAmountTy() so far only return scalar type. As a result, backend logic assuming that breaks. - Rename the original TLI.getShiftAmountTy() to TLI.getScalarShiftAmountTy() and re-define TLI.getShiftAmountTy() to return target-specificed scalar type or the same vector type as the 1st operand. - Fix most TICG logic assuming TLI.getShiftAmountTy() a simple scalar type. llvm-svn: 176364
2013-03-02 02:40:30 +08:00
}
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
/// canOpTrap - Returns true if the operation can trap for the value type.
/// VT must be a legal type.
bool TargetLoweringBase::canOpTrap(unsigned Op, EVT VT) const {
assert(isTypeLegal(VT));
switch (Op) {
default:
return false;
case ISD::FDIV:
case ISD::FREM:
case ISD::SDIV:
case ISD::UDIV:
case ISD::SREM:
case ISD::UREM:
return true;
}
}
add a cl::opt override for TargetLoweringBase's JumpIsExpensive This patch is not intended to change existing codegen behavior for any target. It just exposes the JumpIsExpensive setting on the command-line to allow for easier testing and emergency overrides. Also, change the existing regression test to use FileCheck, explicitly specify the jump-is-expensive option, and use more precise checks. Differential Revision: http://reviews.llvm.org/D10846 llvm-svn: 241179
2015-07-02 02:10:20 +08:00
void TargetLoweringBase::setJumpIsExpensive(bool isExpensive) {
// If the command-line option was specified, ignore this request.
if (!JumpIsExpensiveOverride.getNumOccurrences())
JumpIsExpensive = isExpensive;
}
Move TargetLoweringBase::getTypeConversion to the .cpp file from the .h file. It's used in only one place (other than recursively) and there's no need to include it everywhere. Saves almost 900k from total llvm object file size. llvm-svn: 230561
2015-02-26 06:41:30 +08:00
TargetLoweringBase::LegalizeKind
TargetLoweringBase::getTypeConversion(LLVMContext &Context, EVT VT) const {
// If this is a simple type, use the ComputeRegisterProp mechanism.
if (VT.isSimple()) {
MVT SVT = VT.getSimpleVT();
assert((unsigned)SVT.SimpleTy < array_lengthof(TransformToType));
MVT NVT = TransformToType[SVT.SimpleTy];
LegalizeTypeAction LA = ValueTypeActions.getTypeAction(SVT);
assert((LA == TypeLegal || LA == TypeSoftenFloat ||
ValueTypeActions.getTypeAction(NVT) != TypePromoteInteger) &&
"Promote may not follow Expand or Promote");
if (LA == TypeSplitVector)
return LegalizeKind(LA,
EVT::getVectorVT(Context, SVT.getVectorElementType(),
SVT.getVectorNumElements() / 2));
if (LA == TypeScalarizeVector)
return LegalizeKind(LA, SVT.getVectorElementType());
return LegalizeKind(LA, NVT);
}
// Handle Extended Scalar Types.
if (!VT.isVector()) {
assert(VT.isInteger() && "Float types must be simple");
unsigned BitSize = VT.getSizeInBits();
// First promote to a power-of-two size, then expand if necessary.
if (BitSize < 8 || !isPowerOf2_32(BitSize)) {
EVT NVT = VT.getRoundIntegerType(Context);
assert(NVT != VT && "Unable to round integer VT");
LegalizeKind NextStep = getTypeConversion(Context, NVT);
// Avoid multi-step promotion.
if (NextStep.first == TypePromoteInteger)
return NextStep;
// Return rounded integer type.
return LegalizeKind(TypePromoteInteger, NVT);
}
return LegalizeKind(TypeExpandInteger,
EVT::getIntegerVT(Context, VT.getSizeInBits() / 2));
}
// Handle vector types.
unsigned NumElts = VT.getVectorNumElements();
EVT EltVT = VT.getVectorElementType();
// Vectors with only one element are always scalarized.
if (NumElts == 1)
return LegalizeKind(TypeScalarizeVector, EltVT);
// Try to widen vector elements until the element type is a power of two and
// promote it to a legal type later on, for example:
// <3 x i8> -> <4 x i8> -> <4 x i32>
if (EltVT.isInteger()) {
// Vectors with a number of elements that is not a power of two are always
// widened, for example <3 x i8> -> <4 x i8>.
if (!VT.isPow2VectorType()) {
NumElts = (unsigned)NextPowerOf2(NumElts);
EVT NVT = EVT::getVectorVT(Context, EltVT, NumElts);
return LegalizeKind(TypeWidenVector, NVT);
}
// Examine the element type.
LegalizeKind LK = getTypeConversion(Context, EltVT);
// If type is to be expanded, split the vector.
// <4 x i140> -> <2 x i140>
if (LK.first == TypeExpandInteger)
return LegalizeKind(TypeSplitVector,
EVT::getVectorVT(Context, EltVT, NumElts / 2));
// Promote the integer element types until a legal vector type is found
// or until the element integer type is too big. If a legal type was not
// found, fallback to the usual mechanism of widening/splitting the
// vector.
EVT OldEltVT = EltVT;
while (1) {
// Increase the bitwidth of the element to the next pow-of-two
// (which is greater than 8 bits).
EltVT = EVT::getIntegerVT(Context, 1 + EltVT.getSizeInBits())
.getRoundIntegerType(Context);
// Stop trying when getting a non-simple element type.
// Note that vector elements may be greater than legal vector element
// types. Example: X86 XMM registers hold 64bit element on 32bit
// systems.
if (!EltVT.isSimple())
break;
// Build a new vector type and check if it is legal.
MVT NVT = MVT::getVectorVT(EltVT.getSimpleVT(), NumElts);
// Found a legal promoted vector type.
if (NVT != MVT() && ValueTypeActions.getTypeAction(NVT) == TypeLegal)
return LegalizeKind(TypePromoteInteger,
EVT::getVectorVT(Context, EltVT, NumElts));
}
// Reset the type to the unexpanded type if we did not find a legal vector
// type with a promoted vector element type.
EltVT = OldEltVT;
}
// Try to widen the vector until a legal type is found.
// If there is no wider legal type, split the vector.
while (1) {
// Round up to the next power of 2.
NumElts = (unsigned)NextPowerOf2(NumElts);
// If there is no simple vector type with this many elements then there
// cannot be a larger legal vector type. Note that this assumes that
// there are no skipped intermediate vector types in the simple types.
if (!EltVT.isSimple())
break;
MVT LargerVector = MVT::getVectorVT(EltVT.getSimpleVT(), NumElts);
if (LargerVector == MVT())
break;
// If this type is legal then widen the vector.
if (ValueTypeActions.getTypeAction(LargerVector) == TypeLegal)
return LegalizeKind(TypeWidenVector, LargerVector);
}
// Widen odd vectors to next power of two.
if (!VT.isPow2VectorType()) {
EVT NVT = VT.getPow2VectorType(Context);
return LegalizeKind(TypeWidenVector, NVT);
}
// Vectors with illegal element types are expanded.
EVT NVT = EVT::getVectorVT(Context, EltVT, VT.getVectorNumElements() / 2);
return LegalizeKind(TypeSplitVector, NVT);
}
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
static unsigned getVectorTypeBreakdownMVT(MVT VT, MVT &IntermediateVT,
unsigned &NumIntermediates,
MVT &RegisterVT,
TargetLoweringBase *TLI) {
// Figure out the right, legal destination reg to copy into.
unsigned NumElts = VT.getVectorNumElements();
MVT EltTy = VT.getVectorElementType();
unsigned NumVectorRegs = 1;
// FIXME: We don't support non-power-of-2-sized vectors for now. Ideally we
// could break down into LHS/RHS like LegalizeDAG does.
if (!isPowerOf2_32(NumElts)) {
NumVectorRegs = NumElts;
NumElts = 1;
}
// Divide the input until we get to a supported size. This will always
// end with a scalar if the target doesn't support vectors.
while (NumElts > 1 && !TLI->isTypeLegal(MVT::getVectorVT(EltTy, NumElts))) {
NumElts >>= 1;
NumVectorRegs <<= 1;
}
NumIntermediates = NumVectorRegs;
MVT NewVT = MVT::getVectorVT(EltTy, NumElts);
if (!TLI->isTypeLegal(NewVT))
NewVT = EltTy;
IntermediateVT = NewVT;
unsigned NewVTSize = NewVT.getSizeInBits();
// Convert sizes such as i33 to i64.
if (!isPowerOf2_32(NewVTSize))
NewVTSize = NextPowerOf2(NewVTSize);
MVT DestVT = TLI->getRegisterType(NewVT);
RegisterVT = DestVT;
if (EVT(DestVT).bitsLT(NewVT)) // Value is expanded, e.g. i64 -> i16.
return NumVectorRegs*(NewVTSize/DestVT.getSizeInBits());
// Otherwise, promotion or legal types use the same number of registers as
// the vector decimated to the appropriate level.
return NumVectorRegs;
}
/// isLegalRC - Return true if the value types that can be represented by the
/// specified register class are all legal.
bool TargetLoweringBase::isLegalRC(const TargetRegisterClass *RC) const {
for (TargetRegisterClass::vt_iterator I = RC->vt_begin(), E = RC->vt_end();
I != E; ++I) {
if (isTypeLegal(*I))
return true;
}
return false;
}
Refactor a lot of patchpoint/stackmap related code to simplify and make it target independent. Most of the x86 specific stackmap/patchpoint handling was necessitated by the use of the native address-mode format for frame index operands. PEI has now been modified to treat stackmap/patchpoint similarly to DEBUG_INFO, allowing us to use a simple, platform independent register/offset pair for frame indexes on stackmap/patchpoints. Notes: - Folding is now platform independent and automatically supported. - Emiting patchpoints with direct memory references now just involves calling the TargetLoweringBase::emitPatchPoint utility method from the target's XXXTargetLowering::EmitInstrWithCustomInserter method. (See X86TargetLowering for an example). - No more ugly platform-specific operand parsers. This patch shouldn't change the generated output for X86. llvm-svn: 195944
2013-11-29 11:07:54 +08:00
/// Replace/modify any TargetFrameIndex operands with a targte-dependent
/// sequence of memory operands that is recognized by PrologEpilogInserter.
MachineBasicBlock*
TargetLoweringBase::emitPatchPoint(MachineInstr *MI,
MachineBasicBlock *MBB) const {
MachineFunction &MF = *MI->getParent()->getParent();
// MI changes inside this loop as we grow operands.
for(unsigned OperIdx = 0; OperIdx != MI->getNumOperands(); ++OperIdx) {
MachineOperand &MO = MI->getOperand(OperIdx);
if (!MO.isFI())
continue;
// foldMemoryOperand builds a new MI after replacing a single FI operand
// with the canonical set of five x86 addressing-mode operands.
int FI = MO.getIndex();
MachineInstrBuilder MIB = BuildMI(MF, MI->getDebugLoc(), MI->getDesc());
// Copy operands before the frame-index.
for (unsigned i = 0; i < OperIdx; ++i)
MIB.addOperand(MI->getOperand(i));
// Add frame index operands: direct-mem-ref tag, #FI, offset.
MIB.addImm(StackMaps::DirectMemRefOp);
MIB.addOperand(MI->getOperand(OperIdx));
MIB.addImm(0);
// Copy the operands after the frame index.
for (unsigned i = OperIdx + 1; i != MI->getNumOperands(); ++i)
MIB.addOperand(MI->getOperand(i));
// Inherit previous memory operands.
MIB->setMemRefs(MI->memoperands_begin(), MI->memoperands_end());
assert(MIB->mayLoad() && "Folded a stackmap use to a non-load!");
// Add a new memory operand for this FI.
const MachineFrameInfo &MFI = *MF.getFrameInfo();
assert(MFI.getObjectOffset(FI) != -1);
[Statepoints 2/4] Statepoint infrastructure for garbage collection: MI & x86-64 Backend This is the second patch in a small series. This patch contains the MachineInstruction and x86-64 backend pieces required to lower Statepoints. It does not include the code to actually generate the STATEPOINT machine instruction and as a result, the entire patch is currently dead code. I will be submitting the SelectionDAG parts within the next 24-48 hours. Since those pieces are by far the most complicated, I wanted to minimize the size of that patch. That patch will include the tests which exercise the functionality in this patch. The entire series can be seen as one combined whole in http://reviews.llvm.org/D5683. The STATEPOINT psuedo node is generated after all gc values are explicitly spilled to stack slots. The purpose of this node is to wrap an actual call instruction while recording the spill locations of the meta arguments used for garbage collection and other purposes. The STATEPOINT is modeled as modifing all of those locations to prevent backend optimizations from forwarding the value from before the STATEPOINT to after the STATEPOINT. (Doing so would break relocation semantics for collectors which wish to relocate roots.) The implementation of STATEPOINT is closely modeled on PATCHPOINT. Eventually, much of the code in this patch will be removed. The long term plan is to merge the functionality provided by statepoints and patchpoints. Merging their implementations in the backend is likely to be a good starting point. Reviewed by: atrick, ributzka llvm-svn: 223085
2014-12-02 06:52:56 +08:00
unsigned Flags = MachineMemOperand::MOLoad;
if (MI->getOpcode() == TargetOpcode::STATEPOINT) {
Flags |= MachineMemOperand::MOStore;
Flags |= MachineMemOperand::MOVolatile;
}
Remove the TargetMachine forwards for TargetSubtargetInfo based information and update all callers. No functional change. llvm-svn: 214781
2014-08-05 05:25:23 +08:00
MachineMemOperand *MMO = MF.getMachineMemOperand(
PseudoSourceValue: Replace global manager with a manager in a machine function. This commit removes the global manager variable which is responsible for storing and allocating pseudo source values and instead it introduces a new manager class named 'PseudoSourceValueManager'. Machine functions now own an instance of the pseudo source value manager class. This commit also modifies the 'get...' methods in the 'MachinePointerInfo' class to construct pseudo source values using the instance of the pseudo source value manager object from the machine function. This commit updates calls to the 'get...' methods from the 'MachinePointerInfo' class in a lot of different files because those calls now need to pass in a reference to a machine function to those methods. This change will make it easier to serialize pseudo source values as it will enable me to transform the mips specific MipsCallEntry PseudoSourceValue subclass into two target independent subclasses. Reviewers: Akira Hatanaka llvm-svn: 244693
2015-08-12 07:09:45 +08:00
MachinePointerInfo::getFixedStack(MF, FI), Flags,
Move most user of TargetMachine::getDataLayout to the Module one Summary: This change is part of a series of commits dedicated to have a single DataLayout during compilation by using always the one owned by the module. This patch is quite boring overall, except for some uglyness in ASMPrinter which has a getDataLayout function but has some clients that use it without a Module (llmv-dsymutil, llvm-dwarfdump), so some methods are taking a DataLayout as parameter. Reviewers: echristo Subscribers: yaron.keren, rafael, llvm-commits, jholewinski Differential Revision: http://reviews.llvm.org/D11090 From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 242386
2015-07-16 14:11:10 +08:00
MF.getDataLayout().getPointerSize(), MFI.getObjectAlignment(FI));
Refactor a lot of patchpoint/stackmap related code to simplify and make it target independent. Most of the x86 specific stackmap/patchpoint handling was necessitated by the use of the native address-mode format for frame index operands. PEI has now been modified to treat stackmap/patchpoint similarly to DEBUG_INFO, allowing us to use a simple, platform independent register/offset pair for frame indexes on stackmap/patchpoints. Notes: - Folding is now platform independent and automatically supported. - Emiting patchpoints with direct memory references now just involves calling the TargetLoweringBase::emitPatchPoint utility method from the target's XXXTargetLowering::EmitInstrWithCustomInserter method. (See X86TargetLowering for an example). - No more ugly platform-specific operand parsers. This patch shouldn't change the generated output for X86. llvm-svn: 195944
2013-11-29 11:07:54 +08:00
MIB->addMemOperand(MF, MMO);
// Replace the instruction and update the operand index.
MBB->insert(MachineBasicBlock::iterator(MI), MIB);
OperIdx += (MIB->getNumOperands() - MI->getNumOperands()) - 1;
MI->eraseFromParent();
MI = MIB;
}
return MBB;
}
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
/// findRepresentativeClass - Return the largest legal super-reg register class
/// of the register class for the specified type and its associated "cost".
Add a comment above findRepresentativeClass explaining why it's where it is so that future generations can understand. llvm-svn: 231111
2015-03-04 03:47:14 +08:00
// This function is in TargetLowering because it uses RegClassForVT which would
// need to be moved to TargetRegisterInfo and would necessitate moving
// isTypeLegal over as well - a massive change that would just require
// TargetLowering having a TargetRegisterInfo class member that it would use.
Remove an argument-less call to getSubtargetImpl from TargetLoweringBase. This required plumbing a TargetRegisterInfo through computeRegisterProperties and into findRepresentativeClass which uses it for register class iteration. This required passing a subtarget into a few target specific initializations of TargetLowering. llvm-svn: 230583
2015-02-26 08:00:24 +08:00
std::pair<const TargetRegisterClass *, uint8_t>
TargetLoweringBase::findRepresentativeClass(const TargetRegisterInfo *TRI,
MVT VT) const {
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
const TargetRegisterClass *RC = RegClassForVT[VT.SimpleTy];
if (!RC)
return std::make_pair(RC, 0);
// Compute the set of all super-register classes.
BitVector SuperRegRC(TRI->getNumRegClasses());
for (SuperRegClassIterator RCI(RC, TRI); RCI.isValid(); ++RCI)
SuperRegRC.setBitsInMask(RCI.getMask());
// Find the first legal register class with the largest spill size.
const TargetRegisterClass *BestRC = RC;
for (int i = SuperRegRC.find_first(); i >= 0; i = SuperRegRC.find_next(i)) {
const TargetRegisterClass *SuperRC = TRI->getRegClass(i);
// We want the largest possible spill size.
if (SuperRC->getSize() <= BestRC->getSize())
continue;
if (!isLegalRC(SuperRC))
continue;
BestRC = SuperRC;
}
return std::make_pair(BestRC, 1);
}
/// computeRegisterProperties - Once all of the register classes are added,
/// this allows us to compute derived properties we expose.
Remove an argument-less call to getSubtargetImpl from TargetLoweringBase. This required plumbing a TargetRegisterInfo through computeRegisterProperties and into findRepresentativeClass which uses it for register class iteration. This required passing a subtarget into a few target specific initializations of TargetLowering. llvm-svn: 230583
2015-02-26 08:00:24 +08:00
void TargetLoweringBase::computeRegisterProperties(
const TargetRegisterInfo *TRI) {
Replace a couple asserts with static_asserts. llvm-svn: 222114
2014-11-17 08:26:50 +08:00
static_assert(MVT::LAST_VALUETYPE <= MVT::MAX_ALLOWED_VALUETYPE,
"Too many value types for ValueTypeActions to hold!");
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
// Everything defaults to needing one register.
for (unsigned i = 0; i != MVT::LAST_VALUETYPE; ++i) {
NumRegistersForVT[i] = 1;
RegisterTypeForVT[i] = TransformToType[i] = (MVT::SimpleValueType)i;
}
// ...except isVoid, which doesn't need any registers.
NumRegistersForVT[MVT::isVoid] = 0;
// Find the largest integer register class.
unsigned LargestIntReg = MVT::LAST_INTEGER_VALUETYPE;
[C++11] More 'nullptr' conversion. In some cases just using a boolean check instead of comparing to nullptr. llvm-svn: 206142
2014-04-14 08:51:57 +08:00
for (; RegClassForVT[LargestIntReg] == nullptr; --LargestIntReg)
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
assert(LargestIntReg != MVT::i1 && "No integer registers defined!");
// Every integer value type larger than this largest register takes twice as
// many registers to represent as the previous ValueType.
for (unsigned ExpandedReg = LargestIntReg + 1;
ExpandedReg <= MVT::LAST_INTEGER_VALUETYPE; ++ExpandedReg) {
NumRegistersForVT[ExpandedReg] = 2*NumRegistersForVT[ExpandedReg-1];
RegisterTypeForVT[ExpandedReg] = (MVT::SimpleValueType)LargestIntReg;
TransformToType[ExpandedReg] = (MVT::SimpleValueType)(ExpandedReg - 1);
ValueTypeActions.setTypeAction((MVT::SimpleValueType)ExpandedReg,
TypeExpandInteger);
}
// Inspect all of the ValueType's smaller than the largest integer
// register to see which ones need promotion.
unsigned LegalIntReg = LargestIntReg;
for (unsigned IntReg = LargestIntReg - 1;
IntReg >= (unsigned)MVT::i1; --IntReg) {
MVT IVT = (MVT::SimpleValueType)IntReg;
if (isTypeLegal(IVT)) {
LegalIntReg = IntReg;
} else {
RegisterTypeForVT[IntReg] = TransformToType[IntReg] =
(const MVT::SimpleValueType)LegalIntReg;
ValueTypeActions.setTypeAction(IVT, TypePromoteInteger);
}
}
// ppcf128 type is really two f64's.
if (!isTypeLegal(MVT::ppcf128)) {
NumRegistersForVT[MVT::ppcf128] = 2*NumRegistersForVT[MVT::f64];
RegisterTypeForVT[MVT::ppcf128] = MVT::f64;
TransformToType[MVT::ppcf128] = MVT::f64;
ValueTypeActions.setTypeAction(MVT::ppcf128, TypeExpandFloat);
}
Set properties for f128 type. llvm-svn: 176378
2013-03-02 05:11:44 +08:00
// Decide how to handle f128. If the target does not have native f128 support,
// expand it to i128 and we will be generating soft float library calls.
if (!isTypeLegal(MVT::f128)) {
NumRegistersForVT[MVT::f128] = NumRegistersForVT[MVT::i128];
RegisterTypeForVT[MVT::f128] = RegisterTypeForVT[MVT::i128];
TransformToType[MVT::f128] = MVT::i128;
ValueTypeActions.setTypeAction(MVT::f128, TypeSoftenFloat);
}
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
// Decide how to handle f64. If the target does not have native f64 support,
// expand it to i64 and we will be generating soft float library calls.
if (!isTypeLegal(MVT::f64)) {
NumRegistersForVT[MVT::f64] = NumRegistersForVT[MVT::i64];
RegisterTypeForVT[MVT::f64] = RegisterTypeForVT[MVT::i64];
TransformToType[MVT::f64] = MVT::i64;
ValueTypeActions.setTypeAction(MVT::f64, TypeSoftenFloat);
}
[CodeGen] "PromoteInteger" f32 to f64 doesn't make sense. The original f32->f64 promotion logic was refactored into roughly the currently shape in r37781. However, starting with r132263, the legalizer has been split into different kinds, and the previous "Promote" (which did the right thing) was search-and-replace'd into "PromoteInteger". The divide gradually deepened, with type legalization ("PromoteInteger") being separated from ops legalization ("Promote", which still works for floating point ops). Fast-forward to today: there's no in-tree target with legal f64 but illegal f32 (rather: no tests were harmed in the making of this patch). With such a target, i.e., if you trick the legalizer into going through the PromoteInteger path for FP, you get the expected brokenness. For instance, there's no PromoteIntRes_FADD (the name itself sounds wrong), so we'll just hit some assert in the PromoteInteger path. Don't pretend we can promote f32 to f64. Instead, always soften. llvm-svn: 233464
2015-03-28 09:22:37 +08:00
// Decide how to handle f32. If the target does not have native f32 support,
// expand it to i32 and we will be generating soft float library calls.
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
if (!isTypeLegal(MVT::f32)) {
[CodeGen] "PromoteInteger" f32 to f64 doesn't make sense. The original f32->f64 promotion logic was refactored into roughly the currently shape in r37781. However, starting with r132263, the legalizer has been split into different kinds, and the previous "Promote" (which did the right thing) was search-and-replace'd into "PromoteInteger". The divide gradually deepened, with type legalization ("PromoteInteger") being separated from ops legalization ("Promote", which still works for floating point ops). Fast-forward to today: there's no in-tree target with legal f64 but illegal f32 (rather: no tests were harmed in the making of this patch). With such a target, i.e., if you trick the legalizer into going through the PromoteInteger path for FP, you get the expected brokenness. For instance, there's no PromoteIntRes_FADD (the name itself sounds wrong), so we'll just hit some assert in the PromoteInteger path. Don't pretend we can promote f32 to f64. Instead, always soften. llvm-svn: 233464
2015-03-28 09:22:37 +08:00
NumRegistersForVT[MVT::f32] = NumRegistersForVT[MVT::i32];
RegisterTypeForVT[MVT::f32] = RegisterTypeForVT[MVT::i32];
TransformToType[MVT::f32] = MVT::i32;
ValueTypeActions.setTypeAction(MVT::f32, TypeSoftenFloat);
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
}
CodeGen: soften f16 type by default instead of marking legal. Actual support for softening f16 operations is still limited, and can be added when it's needed. But Soften is much closer to being a useful thing to try than keeping it Legal when no registers can actually hold such values. Longer term, we probably want something between Soften and Promote semantics for most targets, it'll be more efficient to promote the 4 basic operations to f32 than libcall them. llvm-svn: 213372
2014-07-18 20:41:46 +08:00
if (!isTypeLegal(MVT::f16)) {
Add support to promote f16 to f32 Summary: This patch adds legalization support to operate on FP16 as a load/store type and do operations on it as floats. Tests for ARM are added to test/CodeGen/ARM/fp16-promote.ll Reviewers: srhines, t.p.northover Differential Revision: http://reviews.llvm.org/D8755 llvm-svn: 235215
2015-04-18 02:36:25 +08:00
// If the target has native f32 support, promote f16 operations to f32. If
// f32 is not supported, generate soft float library calls.
if (isTypeLegal(MVT::f32)) {
NumRegistersForVT[MVT::f16] = NumRegistersForVT[MVT::f32];
RegisterTypeForVT[MVT::f16] = RegisterTypeForVT[MVT::f32];
TransformToType[MVT::f16] = MVT::f32;
ValueTypeActions.setTypeAction(MVT::f16, TypePromoteFloat);
} else {
NumRegistersForVT[MVT::f16] = NumRegistersForVT[MVT::i16];
RegisterTypeForVT[MVT::f16] = RegisterTypeForVT[MVT::i16];
TransformToType[MVT::f16] = MVT::i16;
ValueTypeActions.setTypeAction(MVT::f16, TypeSoftenFloat);
}
CodeGen: soften f16 type by default instead of marking legal. Actual support for softening f16 operations is still limited, and can be added when it's needed. But Soften is much closer to being a useful thing to try than keeping it Legal when no registers can actually hold such values. Longer term, we probably want something between Soften and Promote semantics for most targets, it'll be more efficient to promote the 4 basic operations to f32 than libcall them. llvm-svn: 213372
2014-07-18 20:41:46 +08:00
}
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
// Loop over all of the vector value types to see which need transformations.
for (unsigned i = MVT::FIRST_VECTOR_VALUETYPE;
i <= (unsigned)MVT::LAST_VECTOR_VALUETYPE; ++i) {
[codegen,aarch64] Add a target hook to the code generator to control vector type legalization strategies in a more fine grained manner, and change the legalization of several v1iN types and v1f32 to be widening rather than scalarization on AArch64. This fixes an assertion failure caused by scalarizing nodes like "v1i32 trunc v1i64". As v1i64 is legal it will fail to scalarize v1i32. This also provides a foundation for other targets to have more granular control over how vector types are legalized. Patch by Hao Liu, reviewed by Tim Northover. I'm committing it to allow some work to start taking place on top of this patch as it adds some really important hooks to the backend that I'd like to immediately start using. =] http://reviews.llvm.org/D4322 llvm-svn: 212242
2014-07-03 08:23:43 +08:00
MVT VT = (MVT::SimpleValueType) i;
if (isTypeLegal(VT))
continue;
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
MVT EltVT = VT.getVectorElementType();
unsigned NElts = VT.getVectorNumElements();
[codegen,aarch64] Add a target hook to the code generator to control vector type legalization strategies in a more fine grained manner, and change the legalization of several v1iN types and v1f32 to be widening rather than scalarization on AArch64. This fixes an assertion failure caused by scalarizing nodes like "v1i32 trunc v1i64". As v1i64 is legal it will fail to scalarize v1i32. This also provides a foundation for other targets to have more granular control over how vector types are legalized. Patch by Hao Liu, reviewed by Tim Northover. I'm committing it to allow some work to start taking place on top of this patch as it adds some really important hooks to the backend that I'd like to immediately start using. =] http://reviews.llvm.org/D4322 llvm-svn: 212242
2014-07-03 08:23:43 +08:00
bool IsLegalWiderType = false;
LegalizeTypeAction PreferredAction = getPreferredVectorAction(VT);
switch (PreferredAction) {
case TypePromoteInteger: {
// Try to promote the elements of integer vectors. If no legal
// promotion was found, fall through to the widen-vector method.
for (unsigned nVT = i + 1; nVT <= MVT::LAST_VECTOR_VALUETYPE; ++nVT) {
MVT SVT = (MVT::SimpleValueType) nVT;
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
// Promote vectors of integers to vectors with the same number
// of elements, with a wider element type.
if (SVT.getVectorElementType().getSizeInBits() > EltVT.getSizeInBits()
[codegen,aarch64] Add a target hook to the code generator to control vector type legalization strategies in a more fine grained manner, and change the legalization of several v1iN types and v1f32 to be widening rather than scalarization on AArch64. This fixes an assertion failure caused by scalarizing nodes like "v1i32 trunc v1i64". As v1i64 is legal it will fail to scalarize v1i32. This also provides a foundation for other targets to have more granular control over how vector types are legalized. Patch by Hao Liu, reviewed by Tim Northover. I'm committing it to allow some work to start taking place on top of this patch as it adds some really important hooks to the backend that I'd like to immediately start using. =] http://reviews.llvm.org/D4322 llvm-svn: 212242
2014-07-03 08:23:43 +08:00
&& SVT.getVectorNumElements() == NElts && isTypeLegal(SVT)
&& SVT.getScalarType().isInteger()) {
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
TransformToType[i] = SVT;
RegisterTypeForVT[i] = SVT;
NumRegistersForVT[i] = 1;
ValueTypeActions.setTypeAction(VT, TypePromoteInteger);
IsLegalWiderType = true;
break;
}
}
[codegen,aarch64] Add a target hook to the code generator to control vector type legalization strategies in a more fine grained manner, and change the legalization of several v1iN types and v1f32 to be widening rather than scalarization on AArch64. This fixes an assertion failure caused by scalarizing nodes like "v1i32 trunc v1i64". As v1i64 is legal it will fail to scalarize v1i32. This also provides a foundation for other targets to have more granular control over how vector types are legalized. Patch by Hao Liu, reviewed by Tim Northover. I'm committing it to allow some work to start taking place on top of this patch as it adds some really important hooks to the backend that I'd like to immediately start using. =] http://reviews.llvm.org/D4322 llvm-svn: 212242
2014-07-03 08:23:43 +08:00
if (IsLegalWiderType)
break;
}
case TypeWidenVector: {
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
// Try to widen the vector.
[codegen,aarch64] Add a target hook to the code generator to control vector type legalization strategies in a more fine grained manner, and change the legalization of several v1iN types and v1f32 to be widening rather than scalarization on AArch64. This fixes an assertion failure caused by scalarizing nodes like "v1i32 trunc v1i64". As v1i64 is legal it will fail to scalarize v1i32. This also provides a foundation for other targets to have more granular control over how vector types are legalized. Patch by Hao Liu, reviewed by Tim Northover. I'm committing it to allow some work to start taking place on top of this patch as it adds some really important hooks to the backend that I'd like to immediately start using. =] http://reviews.llvm.org/D4322 llvm-svn: 212242
2014-07-03 08:23:43 +08:00
for (unsigned nVT = i + 1; nVT <= MVT::LAST_VECTOR_VALUETYPE; ++nVT) {
MVT SVT = (MVT::SimpleValueType) nVT;
if (SVT.getVectorElementType() == EltVT
&& SVT.getVectorNumElements() > NElts && isTypeLegal(SVT)) {
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
TransformToType[i] = SVT;
RegisterTypeForVT[i] = SVT;
NumRegistersForVT[i] = 1;
ValueTypeActions.setTypeAction(VT, TypeWidenVector);
IsLegalWiderType = true;
break;
}
}
[codegen,aarch64] Add a target hook to the code generator to control vector type legalization strategies in a more fine grained manner, and change the legalization of several v1iN types and v1f32 to be widening rather than scalarization on AArch64. This fixes an assertion failure caused by scalarizing nodes like "v1i32 trunc v1i64". As v1i64 is legal it will fail to scalarize v1i32. This also provides a foundation for other targets to have more granular control over how vector types are legalized. Patch by Hao Liu, reviewed by Tim Northover. I'm committing it to allow some work to start taking place on top of this patch as it adds some really important hooks to the backend that I'd like to immediately start using. =] http://reviews.llvm.org/D4322 llvm-svn: 212242
2014-07-03 08:23:43 +08:00
if (IsLegalWiderType)
break;
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
}
[codegen,aarch64] Add a target hook to the code generator to control vector type legalization strategies in a more fine grained manner, and change the legalization of several v1iN types and v1f32 to be widening rather than scalarization on AArch64. This fixes an assertion failure caused by scalarizing nodes like "v1i32 trunc v1i64". As v1i64 is legal it will fail to scalarize v1i32. This also provides a foundation for other targets to have more granular control over how vector types are legalized. Patch by Hao Liu, reviewed by Tim Northover. I'm committing it to allow some work to start taking place on top of this patch as it adds some really important hooks to the backend that I'd like to immediately start using. =] http://reviews.llvm.org/D4322 llvm-svn: 212242
2014-07-03 08:23:43 +08:00
case TypeSplitVector:
case TypeScalarizeVector: {
MVT IntermediateVT;
MVT RegisterVT;
unsigned NumIntermediates;
NumRegistersForVT[i] = getVectorTypeBreakdownMVT(VT, IntermediateVT,
NumIntermediates, RegisterVT, this);
RegisterTypeForVT[i] = RegisterVT;
MVT NVT = VT.getPow2VectorType();
if (NVT == VT) {
// Type is already a power of 2. The default action is to split.
TransformToType[i] = MVT::Other;
if (PreferredAction == TypeScalarizeVector)
ValueTypeActions.setTypeAction(VT, TypeScalarizeVector);
PR20557: Fix the bug that bogus cpu parameter crashes llc on AArch64 backend. Initial patch by Oleg Ranevskyy. llvm-svn: 220945
2014-10-31 10:35:34 +08:00
else if (PreferredAction == TypeSplitVector)
[codegen,aarch64] Add a target hook to the code generator to control vector type legalization strategies in a more fine grained manner, and change the legalization of several v1iN types and v1f32 to be widening rather than scalarization on AArch64. This fixes an assertion failure caused by scalarizing nodes like "v1i32 trunc v1i64". As v1i64 is legal it will fail to scalarize v1i32. This also provides a foundation for other targets to have more granular control over how vector types are legalized. Patch by Hao Liu, reviewed by Tim Northover. I'm committing it to allow some work to start taking place on top of this patch as it adds some really important hooks to the backend that I'd like to immediately start using. =] http://reviews.llvm.org/D4322 llvm-svn: 212242
2014-07-03 08:23:43 +08:00
ValueTypeActions.setTypeAction(VT, TypeSplitVector);
PR20557: Fix the bug that bogus cpu parameter crashes llc on AArch64 backend. Initial patch by Oleg Ranevskyy. llvm-svn: 220945
2014-10-31 10:35:34 +08:00
else
// Set type action according to the number of elements.
ValueTypeActions.setTypeAction(VT, NElts == 1 ? TypeScalarizeVector
: TypeSplitVector);
[codegen,aarch64] Add a target hook to the code generator to control vector type legalization strategies in a more fine grained manner, and change the legalization of several v1iN types and v1f32 to be widening rather than scalarization on AArch64. This fixes an assertion failure caused by scalarizing nodes like "v1i32 trunc v1i64". As v1i64 is legal it will fail to scalarize v1i32. This also provides a foundation for other targets to have more granular control over how vector types are legalized. Patch by Hao Liu, reviewed by Tim Northover. I'm committing it to allow some work to start taking place on top of this patch as it adds some really important hooks to the backend that I'd like to immediately start using. =] http://reviews.llvm.org/D4322 llvm-svn: 212242
2014-07-03 08:23:43 +08:00
} else {
TransformToType[i] = NVT;
ValueTypeActions.setTypeAction(VT, TypeWidenVector);
}
break;
}
default:
llvm_unreachable("Unknown vector legalization action!");
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
}
}
// Determine the 'representative' register class for each value type.
// An representative register class is the largest (meaning one which is
// not a sub-register class / subreg register class) legal register class for
// a group of value types. For example, on i386, i8, i16, and i32
// representative would be GR32; while on x86_64 it's GR64.
for (unsigned i = 0; i != MVT::LAST_VALUETYPE; ++i) {
const TargetRegisterClass* RRC;
uint8_t Cost;
Remove an argument-less call to getSubtargetImpl from TargetLoweringBase. This required plumbing a TargetRegisterInfo through computeRegisterProperties and into findRepresentativeClass which uses it for register class iteration. This required passing a subtarget into a few target specific initializations of TargetLowering. llvm-svn: 230583
2015-02-26 08:00:24 +08:00
std::tie(RRC, Cost) = findRepresentativeClass(TRI, (MVT::SimpleValueType)i);
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
RepRegClassForVT[i] = RRC;
RepRegClassCostForVT[i] = Cost;
}
}
Make TargetLowering::getPointerTy() taking DataLayout as an argument Summary: This change is part of a series of commits dedicated to have a single DataLayout during compilation by using always the one owned by the module. Reviewers: echristo Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits Differential Revision: http://reviews.llvm.org/D11028 From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 241775
2015-07-09 10:09:04 +08:00
EVT TargetLoweringBase::getSetCCResultType(const DataLayout &DL, LLVMContext &,
EVT VT) const {
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
assert(!VT.isVector() && "No default SetCC type for vectors!");
Make TargetLowering::getPointerTy() taking DataLayout as an argument Summary: This change is part of a series of commits dedicated to have a single DataLayout during compilation by using always the one owned by the module. Reviewers: echristo Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits Differential Revision: http://reviews.llvm.org/D11028 From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 241775
2015-07-09 10:09:04 +08:00
return getPointerTy(DL).SimpleTy;
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
}
MVT::SimpleValueType TargetLoweringBase::getCmpLibcallReturnType() const {
return MVT::i32; // return the default value
}
/// getVectorTypeBreakdown - Vector types are broken down into some number of
/// legal first class types. For example, MVT::v8f32 maps to 2 MVT::v4f32
/// with Altivec or SSE1, or 8 promoted MVT::f64 values with the X86 FP stack.
/// Similarly, MVT::v2i64 turns into 4 MVT::i32 values with both PPC and X86.
///
/// This method returns the number of registers needed, and the VT for each
/// register. It also returns the VT and quantity of the intermediate values
/// before they are promoted/expanded.
///
unsigned TargetLoweringBase::getVectorTypeBreakdown(LLVMContext &Context, EVT VT,
EVT &IntermediateVT,
unsigned &NumIntermediates,
MVT &RegisterVT) const {
unsigned NumElts = VT.getVectorNumElements();
// If there is a wider vector type with the same element type as this one,
// or a promoted vector type that has the same number of elements which
// are wider, then we should convert to that legal vector type.
// This handles things like <2 x float> -> <4 x float> and
// <4 x i1> -> <4 x i32>.
LegalizeTypeAction TA = getTypeAction(Context, VT);
if (NumElts != 1 && (TA == TypeWidenVector || TA == TypePromoteInteger)) {
EVT RegisterEVT = getTypeToTransformTo(Context, VT);
if (isTypeLegal(RegisterEVT)) {
IntermediateVT = RegisterEVT;
RegisterVT = RegisterEVT.getSimpleVT();
NumIntermediates = 1;
return 1;
}
}
// Figure out the right, legal destination reg to copy into.
EVT EltTy = VT.getVectorElementType();
unsigned NumVectorRegs = 1;
// FIXME: We don't support non-power-of-2-sized vectors for now. Ideally we
// could break down into LHS/RHS like LegalizeDAG does.
if (!isPowerOf2_32(NumElts)) {
NumVectorRegs = NumElts;
NumElts = 1;
}
// Divide the input until we get to a supported size. This will always
// end with a scalar if the target doesn't support vectors.
while (NumElts > 1 && !isTypeLegal(
EVT::getVectorVT(Context, EltTy, NumElts))) {
NumElts >>= 1;
NumVectorRegs <<= 1;
}
NumIntermediates = NumVectorRegs;
EVT NewVT = EVT::getVectorVT(Context, EltTy, NumElts);
if (!isTypeLegal(NewVT))
NewVT = EltTy;
IntermediateVT = NewVT;
MVT DestVT = getRegisterType(Context, NewVT);
RegisterVT = DestVT;
unsigned NewVTSize = NewVT.getSizeInBits();
// Convert sizes such as i33 to i64.
if (!isPowerOf2_32(NewVTSize))
NewVTSize = NextPowerOf2(NewVTSize);
if (EVT(DestVT).bitsLT(NewVT)) // Value is expanded, e.g. i64 -> i16.
return NumVectorRegs*(NewVTSize/DestVT.getSizeInBits());
// Otherwise, promotion or legal types use the same number of registers as
// the vector decimated to the appropriate level.
return NumVectorRegs;
}
/// Get the EVTs and ArgFlags collections that represent the legalized return
/// type of the given function. This does not require a DAG or a return value,
/// and is suitable for use before any DAGs for the function are constructed.
/// TODO: Move this out of TargetLowering.cpp.
Redirect DataLayout from TargetMachine to Module in ComputeValueVTs() Summary: Avoid using the TargetMachine owned DataLayout and use the Module owned one instead. This requires passing the DataLayout up the stack to ComputeValueVTs(). This change is part of a series of commits dedicated to have a single DataLayout during compilation by using always the one owned by the module. Reviewers: echristo Subscribers: jholewinski, yaron.keren, rafael, llvm-commits Differential Revision: http://reviews.llvm.org/D11019 From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 241773
2015-07-09 09:57:34 +08:00
void llvm::GetReturnInfo(Type *ReturnType, AttributeSet attr,
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
SmallVectorImpl<ISD::OutputArg> &Outs,
Redirect DataLayout from TargetMachine to Module in ComputeValueVTs() Summary: Avoid using the TargetMachine owned DataLayout and use the Module owned one instead. This requires passing the DataLayout up the stack to ComputeValueVTs(). This change is part of a series of commits dedicated to have a single DataLayout during compilation by using always the one owned by the module. Reviewers: echristo Subscribers: jholewinski, yaron.keren, rafael, llvm-commits Differential Revision: http://reviews.llvm.org/D11019 From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 241773
2015-07-09 09:57:34 +08:00
const TargetLowering &TLI, const DataLayout &DL) {
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
SmallVector<EVT, 4> ValueVTs;
Redirect DataLayout from TargetMachine to Module in ComputeValueVTs() Summary: Avoid using the TargetMachine owned DataLayout and use the Module owned one instead. This requires passing the DataLayout up the stack to ComputeValueVTs(). This change is part of a series of commits dedicated to have a single DataLayout during compilation by using always the one owned by the module. Reviewers: echristo Subscribers: jholewinski, yaron.keren, rafael, llvm-commits Differential Revision: http://reviews.llvm.org/D11019 From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 241773
2015-07-09 09:57:34 +08:00
ComputeValueVTs(TLI, DL, ReturnType, ValueVTs);
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
unsigned NumValues = ValueVTs.size();
if (NumValues == 0) return;
for (unsigned j = 0, f = NumValues; j != f; ++j) {
EVT VT = ValueVTs[j];
ISD::NodeType ExtendKind = ISD::ANY_EXTEND;
if (attr.hasAttribute(AttributeSet::ReturnIndex, Attribute::SExt))
ExtendKind = ISD::SIGN_EXTEND;
else if (attr.hasAttribute(AttributeSet::ReturnIndex, Attribute::ZExt))
ExtendKind = ISD::ZERO_EXTEND;
// FIXME: C calling convention requires the return type to be promoted to
// at least 32-bit. But this is not necessary for non-C calling
// conventions. The frontend should mark functions whose return values
// require promoting with signext or zeroext attributes.
if (ExtendKind != ISD::ANY_EXTEND && VT.isInteger()) {
MVT MinVT = TLI.getRegisterType(ReturnType->getContext(), MVT::i32);
if (VT.bitsLT(MinVT))
VT = MinVT;
}
unsigned NumParts = TLI.getNumRegisters(ReturnType->getContext(), VT);
MVT PartVT = TLI.getRegisterType(ReturnType->getContext(), VT);
// 'inreg' on function refers to return value
ISD::ArgFlagsTy Flags = ISD::ArgFlagsTy();
if (attr.hasAttribute(AttributeSet::ReturnIndex, Attribute::InReg))
Flags.setInReg();
// Propagate extension type if any
if (attr.hasAttribute(AttributeSet::ReturnIndex, Attribute::SExt))
Flags.setSExt();
else if (attr.hasAttribute(AttributeSet::ReturnIndex, Attribute::ZExt))
Flags.setZExt();
for (unsigned i = 0; i < NumParts; ++i)
SelectionDAG: Pass along the original argument/element type in ISD::InputArg For some targets, it is useful to be able to look at the original type of an argument without having to dig through the original IR. This also fixes a bug in SelectionDAGBuilder where InputArg.PartOffset was not taking into account the offset of structure elements. Patch by: Justin Holewinski Tom Stellard: - Changed the type of ArgVT to EVT, so it can store non-simple types like v3i32. llvm-svn: 193214
2013-10-23 08:44:24 +08:00
Outs.push_back(ISD::OutputArg(Flags, PartVT, VT, /*isFixed=*/true, 0, 0));
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
}
}
/// getByValTypeAlignment - Return the desired alignment for ByVal aggregate
/// function arguments in the caller parameter area. This is the actual
/// alignment, not its logarithm.
Make getByValTypeAlignment() taking DataLayout as an argument Summary: This change is part of a series of commits dedicated to have a single DataLayout during compilation by using always the one owned by the module. Reviewers: echristo Subscribers: yaron.keren, rafael, llvm-commits, jholewinski Differential Revision: http://reviews.llvm.org/D11038 From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 241777
2015-07-09 10:09:28 +08:00
unsigned TargetLoweringBase::getByValTypeAlignment(Type *Ty,
const DataLayout &DL) const {
return DL.getABITypeAlignment(Ty);
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
}
move DAGCombiner's allowableAlignment() helper function into the TLI Making allowableAlignment() more accessible was suggested as a predecessor patch for D10662, so I've pulled it into TargetLowering. This let's us remove 4 instances of duplicate logic in LegalizeDAG. There's a subtle functional change in the implementation: the existing allowableAlignment() code was using getPrefTypeAlignment() when checking alignment with the DataLayout and assumed that was fast. In this implementation, we use getABITypeAlignment() and assume that is fast. See the TODO comment or the discussion in the Phab review for future improvements in this implementation (don't use the data layout at all). There are no regression test changes from this difference, and I'm not sure how to expose it via a test. I think we actually do want to provide the 'Fast' param when checking this from DAGCombiner::MergeConsecutiveStores(). Ie, we shouldn't merge stores if the new stores are not going to be fast. But that change will require fixing allowsMisalignedMemoryAccess() overrides as noted in D10662. Differential Revision: http://reviews.llvm.org/D10905 llvm-svn: 243549
2015-07-30 02:24:18 +08:00
bool TargetLoweringBase::allowsMemoryAccess(LLVMContext &Context,
const DataLayout &DL, EVT VT,
unsigned AddrSpace,
unsigned Alignment,
bool *Fast) const {
// Check if the specified alignment is sufficient based on the data layout.
// TODO: While using the data layout works in practice, a better solution
// would be to implement this check directly (make this a virtual function).
// For example, the ABI alignment may change based on software platform while
// this function should only be affected by hardware implementation.
Type *Ty = VT.getTypeForEVT(Context);
if (Alignment >= DL.getABITypeAlignment(Ty)) {
// Assume that an access that meets the ABI-specified alignment is fast.
if (Fast != nullptr)
*Fast = true;
return true;
}
// This is a misaligned access.
return allowsMisalignedMemoryAccesses(VT, AddrSpace, Alignment, Fast);
}
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
//===----------------------------------------------------------------------===//
// TargetTransformInfo Helpers
//===----------------------------------------------------------------------===//
int TargetLoweringBase::InstructionOpcodeToISD(unsigned Opcode) const {
enum InstructionOpcodes {
#define HANDLE_INST(NUM, OPCODE, CLASS) OPCODE = NUM,
#define LAST_OTHER_INST(NUM) InstructionOpcodesCount = NUM
#include "llvm/IR/Instruction.def"
};
switch (static_cast<InstructionOpcodes>(Opcode)) {
case Ret: return 0;
case Br: return 0;
case Switch: return 0;
case IndirectBr: return 0;
case Invoke: return 0;
case Resume: return 0;
case Unreachable: return 0;
[WinEH] Add cleanupendpad instruction Summary: Add a `cleanupendpad` instruction, used to mark exceptional exits out of cleanups (for languages/targets that can abort a cleanup with another exception). The `cleanupendpad` instruction is similar to the `catchendpad` instruction in that it is an EH pad which is the target of unwind edges in the handler and which itself has an unwind edge to the next EH action. The `cleanupendpad` instruction, similar to `cleanupret` has a `cleanuppad` argument indicating which cleanup it exits. The unwind successors of a `cleanuppad`'s `cleanupendpad`s must agree with each other and with its `cleanupret`s. Update WinEHPrepare (and docs/tests) to accomodate `cleanupendpad`. Reviewers: rnk, andrew.w.kaylor, majnemer Subscribers: llvm-commits Differential Revision: http://reviews.llvm.org/D12433 llvm-svn: 246751
2015-09-03 17:09:43 +08:00
case CleanupEndPad: return 0;
New EH representation for MSVC compatibility This introduces new instructions neccessary to implement MSVC-compatible exception handling support. Most of the middle-end and none of the back-end haven't been audited or updated to take them into account. Differential Revision: http://reviews.llvm.org/D11097 llvm-svn: 243766
2015-08-01 01:58:14 +08:00
case CleanupRet: return 0;
case CatchEndPad: return 0;
case CatchRet: return 0;
case CatchPad: return 0;
case TerminatePad: return 0;
case CleanupPad: return 0;
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
case Add: return ISD::ADD;
case FAdd: return ISD::FADD;
case Sub: return ISD::SUB;
case FSub: return ISD::FSUB;
case Mul: return ISD::MUL;
case FMul: return ISD::FMUL;
case UDiv: return ISD::UDIV;
X86TTI: Adjust sdiv cost now that we can lower it on plain SSE2. Includes a fix for a horrible typo that caused all SDIV costs to be slightly off :) llvm-svn: 207371
2014-04-28 02:47:54 +08:00
case SDiv: return ISD::SDIV;
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
case FDiv: return ISD::FDIV;
case URem: return ISD::UREM;
case SRem: return ISD::SREM;
case FRem: return ISD::FREM;
case Shl: return ISD::SHL;
case LShr: return ISD::SRL;
case AShr: return ISD::SRA;
case And: return ISD::AND;
case Or: return ISD::OR;
case Xor: return ISD::XOR;
case Alloca: return 0;
case Load: return ISD::LOAD;
case Store: return ISD::STORE;
case GetElementPtr: return 0;
case Fence: return 0;
case AtomicCmpXchg: return 0;
case AtomicRMW: return 0;
case Trunc: return ISD::TRUNCATE;
case ZExt: return ISD::ZERO_EXTEND;
case SExt: return ISD::SIGN_EXTEND;
case FPToUI: return ISD::FP_TO_UINT;
case FPToSI: return ISD::FP_TO_SINT;
case UIToFP: return ISD::UINT_TO_FP;
case SIToFP: return ISD::SINT_TO_FP;
case FPTrunc: return ISD::FP_ROUND;
case FPExt: return ISD::FP_EXTEND;
case PtrToInt: return ISD::BITCAST;
case IntToPtr: return ISD::BITCAST;
case BitCast: return ISD::BITCAST;
Add addrspacecast instruction. Patch by Michele Scandale! llvm-svn: 194760
2013-11-15 09:34:59 +08:00
case AddrSpaceCast: return ISD::ADDRSPACECAST;
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
case ICmp: return ISD::SETCC;
case FCmp: return ISD::SETCC;
case PHI: return 0;
case Call: return 0;
case Select: return ISD::SELECT;
case UserOp1: return 0;
case UserOp2: return 0;
case VAArg: return 0;
case ExtractElement: return ISD::EXTRACT_VECTOR_ELT;
case InsertElement: return ISD::INSERT_VECTOR_ELT;
case ShuffleVector: return ISD::VECTOR_SHUFFLE;
case ExtractValue: return ISD::MERGE_VALUES;
case InsertValue: return ISD::MERGE_VALUES;
case LandingPad: return 0;
}
llvm_unreachable("Unknown instruction type encountered!");
}
[TTI] Make the cost APIs in TargetTransformInfo consistently use 'int' rather than 'unsigned' for their costs. For something like costs in particular there is a natural "negative" value, that of savings or saved cost. As a consequence, there is a lot of code that subtracts or creates negative values based on cost, all of which is prone to awkwardness or bugs when dealing with an unsigned type. Similarly, we *never* want these values to wrap, as that would cause Very Bad code generation (likely percieved as an infinite loop as we try to emit over 2^32 instructions or some such insanity). All around 'int' seems a much better fit for these basic metrics. I've added asserts to ensure that at least the TTI interface never returns negative numbers here. If we ever have a use case for negative numbers, we can remove this, but this way a bug where someone used '-1' to produce a 'very large' cost will be caught by the assert. This passes all tests, and is also UBSan clean. No functional change intended. Differential Revision: http://reviews.llvm.org/D11741 llvm-svn: 244080
2015-08-06 02:08:10 +08:00
std::pair<int, MVT>
Make TargetLowering::getPointerTy() taking DataLayout as an argument Summary: This change is part of a series of commits dedicated to have a single DataLayout during compilation by using always the one owned by the module. Reviewers: echristo Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits Differential Revision: http://reviews.llvm.org/D11028 From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 241775
2015-07-09 10:09:04 +08:00
TargetLoweringBase::getTypeLegalizationCost(const DataLayout &DL,
Type *Ty) const {
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
LLVMContext &C = Ty->getContext();
Make TargetLowering::getPointerTy() taking DataLayout as an argument Summary: This change is part of a series of commits dedicated to have a single DataLayout during compilation by using always the one owned by the module. Reviewers: echristo Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits Differential Revision: http://reviews.llvm.org/D11028 From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 241775
2015-07-09 10:09:04 +08:00
EVT MTy = getValueType(DL, Ty);
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
[TTI] Make the cost APIs in TargetTransformInfo consistently use 'int' rather than 'unsigned' for their costs. For something like costs in particular there is a natural "negative" value, that of savings or saved cost. As a consequence, there is a lot of code that subtracts or creates negative values based on cost, all of which is prone to awkwardness or bugs when dealing with an unsigned type. Similarly, we *never* want these values to wrap, as that would cause Very Bad code generation (likely percieved as an infinite loop as we try to emit over 2^32 instructions or some such insanity). All around 'int' seems a much better fit for these basic metrics. I've added asserts to ensure that at least the TTI interface never returns negative numbers here. If we ever have a use case for negative numbers, we can remove this, but this way a bug where someone used '-1' to produce a 'very large' cost will be caught by the assert. This passes all tests, and is also UBSan clean. No functional change intended. Differential Revision: http://reviews.llvm.org/D11741 llvm-svn: 244080
2015-08-06 02:08:10 +08:00
int Cost = 1;
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
// We keep legalizing the type until we find a legal kind. We assume that
// the only operation that costs anything is the split. After splitting
// we need to handle two types.
while (true) {
LegalizeKind LK = getTypeConversion(C, MTy);
if (LK.first == TypeLegal)
return std::make_pair(Cost, MTy.getSimpleVT());
if (LK.first == TypeSplitVector || LK.first == TypeExpandInteger)
Cost *= 2;
// Keep legalizing the type.
MTy = LK.second;
}
}
//===----------------------------------------------------------------------===//
// Loop Strength Reduction hooks
//===----------------------------------------------------------------------===//
/// isLegalAddressingMode - Return true if the addressing mode represented
/// by AM is legal for this target, for a load/store of the specified type.
Make isLegalAddressingMode() taking DataLayout as an argument Summary: This change is part of a series of commits dedicated to have a single DataLayout during compilation by using always the one owned by the module. Reviewers: echristo Subscribers: jholewinski, llvm-commits, rafael, yaron.keren Differential Revision: http://reviews.llvm.org/D11040 From: Mehdi Amini <mehdi.amini@apple.com> llvm-svn: 241778
2015-07-09 10:09:40 +08:00
bool TargetLoweringBase::isLegalAddressingMode(const DataLayout &DL,
const AddrMode &AM, Type *Ty,
Add address space argument to isLegalAddressingMode This is important because of different addressing modes depending on the address space for GPU targets. This only adds the argument, and does not update any of the uses to provide the correct address space. llvm-svn: 238723
2015-06-01 13:31:59 +08:00
unsigned AS) const {
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
// The default implementation of this implements a conservative RISCy, r+r and
// r+i addr mode.
// Allows a sign-extended 16-bit immediate field.
if (AM.BaseOffs <= -(1LL << 16) || AM.BaseOffs >= (1LL << 16)-1)
return false;
// No global is ever allowed as a base.
if (AM.BaseGV)
return false;
// Only support r+r,
switch (AM.Scale) {
case 0: // "r+i" or just "i", depending on HasBaseReg.
break;
case 1:
if (AM.HasBaseReg && AM.BaseOffs) // "r+r+i" is not allowed.
return false;
// Otherwise we have r+r or r+i.
break;
case 2:
if (AM.HasBaseReg || AM.BaseOffs) // 2*r+r or 2*r+i is not allowed.
return false;
// Allow 2*r as r+r.
break;
TargetLowering: n * r where n > 2 should be an illegal addressing mode llvm-svn: 201433
2014-02-15 05:10:34 +08:00
default: // Don't allow n * r
return false;
Split TargetLowering into a CodeGen and a SelectionDAG part. This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still a complete mess but as long as the edges consist of virtual call it doesn't cause breakage. BasicTTI did static calls and thus broke some build configurations. llvm-svn: 172246
2013-01-12 04:05:37 +08:00
}
return true;
}