maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/SystemZ/int-cmp-48.ll

246 lines
5.9 KiB
LLVM
Raw Normal View History

[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; Test the use of TM and TMY.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z196 | FileCheck %s
@g = global i32 0
; Check a simple branching use of TM.
define void @f1(i8 *%src) {
; CHECK-LABEL: f1:
; CHECK: tm 0(%r2), 1
[SystemZ] Implement conditional returns Return is now considered a predicable instruction, and is converted to a newly-added CondReturn (which maps to BCR to %r14) instruction by the if conversion pass. Also, fused compare-and-branch transform knows about conditional returns, emitting the proper fused instructions for them. This transform triggers on a *lot* of tests, hence the huge diffstat. The changes are mostly jX to br %r14 -> bXr %r14. Author: koriakin Differential Revision: http://reviews.llvm.org/D17339 llvm-svn: 265689
2016-04-08 00:11:44 +08:00
; CHECK: ber %r14
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
entry:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%src
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 1
%cmp = icmp eq i8 %and, 0
br i1 %cmp, label %exit, label %store
store:
store i32 1, i32 *@g
br label %exit
exit:
ret void
}
; Check that we do not fold across an aliasing store.
define void @f2(i8 *%src) {
; CHECK-LABEL: f2:
; CHECK: llc [[REG:%r[0-5]]], 0(%r2)
; CHECK: tmll [[REG]], 1
ScheduleDAGInstrs: Add condjump deps to addSchedBarrierDeps() addSchedBarrierDeps() is supposed to add use operands to the ExitSU node. The current implementation adds uses for calls/barrier instruction and the MBB live-outs in all other cases. The use operands of conditional jump instructions were missed. Also added code to macrofusion to set the latencies between nodes to zero to avoid problems with the fusing nodes lingering around in the pending list now. Differential Revision: https://reviews.llvm.org/D25140 llvm-svn: 286544
2016-11-11 09:34:21 +08:00
; CHECK: mvi 0(%r2), 0
[SystemZ] Implement conditional returns Return is now considered a predicable instruction, and is converted to a newly-added CondReturn (which maps to BCR to %r14) instruction by the if conversion pass. Also, fused compare-and-branch transform knows about conditional returns, emitting the proper fused instructions for them. This transform triggers on a *lot* of tests, hence the huge diffstat. The changes are mostly jX to br %r14 -> bXr %r14. Author: koriakin Differential Revision: http://reviews.llvm.org/D17339 llvm-svn: 265689
2016-04-08 00:11:44 +08:00
; CHECK: ber %r14
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
entry:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%src
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
store i8 0, i8 *%src
%and = and i8 %byte, 1
%cmp = icmp eq i8 %and, 0
br i1 %cmp, label %exit, label %store
store:
store i32 1, i32 *@g
br label %exit
exit:
ret void
}
; Check a simple select-based use of TM.
define double @f3(i8 *%src, double %a, double %b) {
; CHECK-LABEL: f3:
; CHECK: tm 0(%r2), 1
Revert "CodeGen: Allow small copyable blocks to "break" the CFG." This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded. This needs a simple probability check because there are some cases where it is not profitable. llvm-svn: 291695
2017-01-12 03:55:19 +08:00
; CHECK: je {{\.L.*}}
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%src
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 1
%cmp = icmp eq i8 %and, 0
%res = select i1 %cmp, double %b, double %a
ret double %res
}
; Check that we do not fold across an aliasing store.
define double @f4(i8 *%src, double %a, double %b) {
; CHECK-LABEL: f4:
; CHECK: tm 0(%r2), 1
; CHECK: je {{\.L.*}}
; CHECK: mvi 0(%r2), 0
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%src
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 1
%cmp = icmp eq i8 %and, 0
%res = select i1 %cmp, double %b, double %a
store i8 0, i8 *%src
ret double %res
}
; Check an inequality check.
define double @f5(i8 *%src, double %a, double %b) {
; CHECK-LABEL: f5:
; CHECK: tm 0(%r2), 1
Revert "CodeGen: Allow small copyable blocks to "break" the CFG." This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded. This needs a simple probability check because there are some cases where it is not profitable. llvm-svn: 291695
2017-01-12 03:55:19 +08:00
; CHECK: jne {{\.L.*}}
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%src
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 1
%cmp = icmp ne i8 %and, 0
%res = select i1 %cmp, double %b, double %a
ret double %res
}
; Check that we can also use TM for equality comparisons with the mask.
define double @f6(i8 *%src, double %a, double %b) {
; CHECK-LABEL: f6:
; CHECK: tm 0(%r2), 254
Revert "CodeGen: Allow small copyable blocks to "break" the CFG." This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded. This needs a simple probability check because there are some cases where it is not profitable. llvm-svn: 291695
2017-01-12 03:55:19 +08:00
; CHECK: jo {{\.L.*}}
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%src
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 254
%cmp = icmp eq i8 %and, 254
%res = select i1 %cmp, double %b, double %a
ret double %res
}
; Check inequality comparisons with the mask.
define double @f7(i8 *%src, double %a, double %b) {
; CHECK-LABEL: f7:
; CHECK: tm 0(%r2), 254
Revert "CodeGen: Allow small copyable blocks to "break" the CFG." This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded. This needs a simple probability check because there are some cases where it is not profitable. llvm-svn: 291695
2017-01-12 03:55:19 +08:00
; CHECK: jno {{\.L.*}}
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%src
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 254
%cmp = icmp ne i8 %and, 254
%res = select i1 %cmp, double %b, double %a
ret double %res
}
; Check that we do not use the memory TM instruction when CC is being tested
; for 2.
define double @f8(i8 *%src, double %a, double %b) {
; CHECK-LABEL: f8:
; CHECK: llc [[REG:%r[0-5]]], 0(%r2)
; CHECK: tmll [[REG]], 3
Revert "CodeGen: Allow small copyable blocks to "break" the CFG." This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded. This needs a simple probability check because there are some cases where it is not profitable. llvm-svn: 291695
2017-01-12 03:55:19 +08:00
; CHECK: jh {{\.L.*}}
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%src
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 3
%cmp = icmp eq i8 %and, 2
%res = select i1 %cmp, double %b, double %a
ret double %res
}
; ...likewise 1.
define double @f9(i8 *%src, double %a, double %b) {
; CHECK-LABEL: f9:
; CHECK: llc [[REG:%r[0-5]]], 0(%r2)
; CHECK: tmll [[REG]], 3
Revert "CodeGen: Allow small copyable blocks to "break" the CFG." This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded. This needs a simple probability check because there are some cases where it is not profitable. llvm-svn: 291695
2017-01-12 03:55:19 +08:00
; CHECK: jl {{\.L.*}}
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%src
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 3
%cmp = icmp eq i8 %and, 1
%res = select i1 %cmp, double %b, double %a
ret double %res
}
; Check the high end of the TM range.
define double @f10(i8 *%src, double %a, double %b) {
; CHECK-LABEL: f10:
; CHECK: tm 4095(%r2), 1
Revert "CodeGen: Allow small copyable blocks to "break" the CFG." This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded. This needs a simple probability check because there are some cases where it is not profitable. llvm-svn: 291695
2017-01-12 03:55:19 +08:00
; CHECK: je {{\.L.*}}
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%ptr = getelementptr i8, i8 *%src, i64 4095
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%ptr
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 1
%cmp = icmp eq i8 %and, 0
%res = select i1 %cmp, double %b, double %a
ret double %res
}
; Check the low end of the positive TMY range.
define double @f11(i8 *%src, double %a, double %b) {
; CHECK-LABEL: f11:
; CHECK: tmy 4096(%r2), 1
Revert "CodeGen: Allow small copyable blocks to "break" the CFG." This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded. This needs a simple probability check because there are some cases where it is not profitable. llvm-svn: 291695
2017-01-12 03:55:19 +08:00
; CHECK: je {{\.L.*}}
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%ptr = getelementptr i8, i8 *%src, i64 4096
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%ptr
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 1
%cmp = icmp eq i8 %and, 0
%res = select i1 %cmp, double %b, double %a
ret double %res
}
; Check the high end of the TMY range.
define double @f12(i8 *%src, double %a, double %b) {
; CHECK-LABEL: f12:
; CHECK: tmy 524287(%r2), 1
Revert "CodeGen: Allow small copyable blocks to "break" the CFG." This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded. This needs a simple probability check because there are some cases where it is not profitable. llvm-svn: 291695
2017-01-12 03:55:19 +08:00
; CHECK: je {{\.L.*}}
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%ptr = getelementptr i8, i8 *%src, i64 524287
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%ptr
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 1
%cmp = icmp eq i8 %and, 0
%res = select i1 %cmp, double %b, double %a
ret double %res
}
; Check the next byte up, which needs separate address logic.
define double @f13(i8 *%src, double %a, double %b) {
; CHECK-LABEL: f13:
; CHECK: agfi %r2, 524288
; CHECK: tm 0(%r2), 1
Revert "CodeGen: Allow small copyable blocks to "break" the CFG." This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded. This needs a simple probability check because there are some cases where it is not profitable. llvm-svn: 291695
2017-01-12 03:55:19 +08:00
; CHECK: je {{\.L.*}}
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%ptr = getelementptr i8, i8 *%src, i64 524288
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%ptr
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 1
%cmp = icmp eq i8 %and, 0
%res = select i1 %cmp, double %b, double %a
ret double %res
}
; Check the low end of the TMY range.
define double @f14(i8 *%src, double %a, double %b) {
; CHECK-LABEL: f14:
; CHECK: tmy -524288(%r2), 1
Revert "CodeGen: Allow small copyable blocks to "break" the CFG." This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded. This needs a simple probability check because there are some cases where it is not profitable. llvm-svn: 291695
2017-01-12 03:55:19 +08:00
; CHECK: je {{\.L.*}}
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%ptr = getelementptr i8, i8 *%src, i64 -524288
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%ptr
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 1
%cmp = icmp eq i8 %and, 0
%res = select i1 %cmp, double %b, double %a
ret double %res
}
; Check the next byte down, which needs separate address logic.
define double @f15(i8 *%src, double %a, double %b) {
; CHECK-LABEL: f15:
; CHECK: agfi %r2, -524289
; CHECK: tm 0(%r2), 1
Revert "CodeGen: Allow small copyable blocks to "break" the CFG." This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded. This needs a simple probability check because there are some cases where it is not profitable. llvm-svn: 291695
2017-01-12 03:55:19 +08:00
; CHECK: je {{\.L.*}}
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%ptr = getelementptr i8, i8 *%src, i64 -524289
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%ptr
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 1
%cmp = icmp eq i8 %and, 0
%res = select i1 %cmp, double %b, double %a
ret double %res
}
; Check that TM(Y) does not allow an index
define double @f16(i8 *%src, i64 %index, double %a, double %b) {
; CHECK-LABEL: f16:
; CHECK: tm 0({{%r[1-5]}}), 1
Revert "CodeGen: Allow small copyable blocks to "break" the CFG." This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded. This needs a simple probability check because there are some cases where it is not profitable. llvm-svn: 291695
2017-01-12 03:55:19 +08:00
; CHECK: je {{\.L.*}}
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%ptr = getelementptr i8, i8 *%src, i64 %index
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%byte = load i8 , i8 *%ptr
[SystemZ] Add TM and TMY The main complication here is that TM and TMY (the memory forms) set CC differently from the register forms. When the tested bits contain some 0s and some 1s, the register forms set CC to 1 or 2 based on the value the uppermost bit. The memory forms instead set CC to 1 regardless of the uppermost bit. Until now, I've tried to make it so that a branch never tests for an impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the result will only test for 0 or 1. Originally I'd tried to do the same thing for TM and TMY by using custom matching code in ISelDAGToDAG. That ended up being very ugly though, and would have meant duplicating some of the chain checks that the common isel code does. I've therefore gone for the simpler alternative of adding an extra operand to the TM DAG opcode to say whether a memory form would be OK. This means that the inverse of a "TM;JE" is "TM;JNE" rather than the more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE". I suppose that's arguably less confusing though... llvm-svn: 190400
2013-09-10 18:20:32 +08:00
%and = and i8 %byte, 1
%cmp = icmp eq i8 %and, 0
%res = select i1 %cmp, double %b, double %a
ret double %res
}