maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/X86/extractelement-load.ll

112 lines
3.8 KiB
LLVM
Raw Normal View History

[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; NOTE: Assertions have been autogenerated by utils/update_llc_test_checks.py
; RUN: llc < %s -mtriple=i686-unknown -mattr=+sse2 | FileCheck %s --check-prefix=X32-SSE2
; RUN: llc < %s -mtriple=x86_64-unknown -mattr=+ssse3 | FileCheck %s --check-prefix=X64-SSSE3
; RUN: llc < %s -mtriple=x86_64-unknown -mattr=+avx | FileCheck %s --check-prefix=X64-AVX
Instead of a vector load, shuffle and then extract an element. Load the element from address with an offset. pshufd $1, (%rdi), %xmm0 movd %xmm0, %eax => movl 4(%rdi), %eax llvm-svn: 51026
2008-05-13 16:35:03 +08:00
[SDAG] Re-instate r215611 with a fix to a pesky X86 DAG combine. This combine is essentially combining target-specific nodes back into target independent nodes that it "knows" will be combined yet again by a target independent DAG combine into a different set of target-independent nodes that are legal (not custom though!) and thus "ok". This seems... deeply flawed. The crux of the problem is that we don't combine un-legalized shuffles that are introduced by legalizing other operations, and thus we don't see a very profitable combine opportunity. So the backend just forces the input to that combine to re-appear. However, for this to work, the conditions detected to re-form the unlegalized nodes must be *exactly* right. Previously, failing this would have caused poor code (if you're lucky) or a crasher when we failed to select instructions. After r215611 we would fall back into the legalizer. In some cases, this just "fixed" the crasher by produces bad code. But in the test case added it caused the legalizer and the dag combiner to iterate forever. The fix is to make the alignment checking in the x86 side of things match the alignment checking in the generic DAG combine exactly. This isn't really a satisfying or principled fix, but it at least make the code work as intended. It also highlights that it would be nice to detect the availability of under aligned loads for a given type rather than bailing on this optimization. I've left a FIXME to document this. Original commit message for r215611 which covers the rest of the chang: [SDAG] Fix a case where we would iteratively legalize a node during combining by replacing it with something else but not re-process the node afterward to remove it. In a truly remarkable stroke of bad luck, this would (in the test case attached) end up getting some other node combined into it without ever getting re-processed. By adding it back on to the worklist, in addition to deleting the dead nodes more quickly we also ensure that if it *stops* being dead for any reason it makes it back through the legalizer. Without this, the test case will end up failing during instruction selection due to an and node with a type we don't have an instruction pattern for. It took many million runs of the shuffle fuzz tester to find this. llvm-svn: 216537
2014-08-27 19:22:16 +08:00
target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
Instead of a vector load, shuffle and then extract an element. Load the element from address with an offset. pshufd $1, (%rdi), %xmm0 movd %xmm0, %eax => movl 4(%rdi), %eax llvm-svn: 51026
2008-05-13 16:35:03 +08:00
define i32 @t(<2 x i64>* %val) nounwind {
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X32-SSE2-LABEL: t:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; X32-SSE2: # %bb.0:
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X32-SSE2-NEXT: movl {{[0-9]+}}(%esp), %eax
; X32-SSE2-NEXT: movl 8(%eax), %eax
; X32-SSE2-NEXT: retl
;
; X64-SSSE3-LABEL: t:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; X64-SSSE3: # %bb.0:
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X64-SSSE3-NEXT: movl 8(%rdi), %eax
; X64-SSSE3-NEXT: retq
;
; X64-AVX-LABEL: t:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; X64-AVX: # %bb.0:
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X64-AVX-NEXT: movl 8(%rdi), %eax
; X64-AVX-NEXT: retq
%tmp2 = load <2 x i64>, <2 x i64>* %val, align 16 ; <<2 x i64>> [#uses=1]
%tmp3 = bitcast <2 x i64> %tmp2 to <4 x i32> ; <<4 x i32>> [#uses=1]
%tmp4 = extractelement <4 x i32> %tmp3, i32 2 ; <i32> [#uses=1]
ret i32 %tmp4
Instead of a vector load, shuffle and then extract an element. Load the element from address with an offset. pshufd $1, (%rdi), %xmm0 movd %xmm0, %eax => movl 4(%rdi), %eax llvm-svn: 51026
2008-05-13 16:35:03 +08:00
}
Make sure this DAGCombine actually returns an UNDEF of the correct type; PR10476. llvm-svn: 135993
2011-07-26 06:25:42 +08:00
; Case where extractelement of load ends up as undef.
; (Making sure this doesn't crash.)
define i32 @t2(<8 x i32>* %xp) {
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X32-SSE2-LABEL: t2:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; X32-SSE2: # %bb.0:
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X32-SSE2-NEXT: retl
;
; X64-SSSE3-LABEL: t2:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; X64-SSSE3: # %bb.0:
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X64-SSSE3-NEXT: retq
;
; X64-AVX-LABEL: t2:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; X64-AVX: # %bb.0:
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X64-AVX-NEXT: retq
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%x = load <8 x i32>, <8 x i32>* %xp
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
%Shuff68 = shufflevector <8 x i32> %x, <8 x i32> undef, <8 x i32> <i32 undef, i32 7, i32 9, i32 undef, i32 13, i32 15, i32 1, i32 3>
Make sure this DAGCombine actually returns an UNDEF of the correct type; PR10476. llvm-svn: 135993
2011-07-26 06:25:42 +08:00
%y = extractelement <8 x i32> %Shuff68, i32 0
ret i32 %y
}
[SDAG] Re-instate r215611 with a fix to a pesky X86 DAG combine. This combine is essentially combining target-specific nodes back into target independent nodes that it "knows" will be combined yet again by a target independent DAG combine into a different set of target-independent nodes that are legal (not custom though!) and thus "ok". This seems... deeply flawed. The crux of the problem is that we don't combine un-legalized shuffles that are introduced by legalizing other operations, and thus we don't see a very profitable combine opportunity. So the backend just forces the input to that combine to re-appear. However, for this to work, the conditions detected to re-form the unlegalized nodes must be *exactly* right. Previously, failing this would have caused poor code (if you're lucky) or a crasher when we failed to select instructions. After r215611 we would fall back into the legalizer. In some cases, this just "fixed" the crasher by produces bad code. But in the test case added it caused the legalizer and the dag combiner to iterate forever. The fix is to make the alignment checking in the x86 side of things match the alignment checking in the generic DAG combine exactly. This isn't really a satisfying or principled fix, but it at least make the code work as intended. It also highlights that it would be nice to detect the availability of under aligned loads for a given type rather than bailing on this optimization. I've left a FIXME to document this. Original commit message for r215611 which covers the rest of the chang: [SDAG] Fix a case where we would iteratively legalize a node during combining by replacing it with something else but not re-process the node afterward to remove it. In a truly remarkable stroke of bad luck, this would (in the test case attached) end up getting some other node combined into it without ever getting re-processed. By adding it back on to the worklist, in addition to deleting the dead nodes more quickly we also ensure that if it *stops* being dead for any reason it makes it back through the legalizer. Without this, the test case will end up failing during instruction selection due to an and node with a type we don't have an instruction pattern for. It took many million runs of the shuffle fuzz tester to find this. llvm-svn: 216537
2014-08-27 19:22:16 +08:00
; This case could easily end up inf-looping in the DAG combiner due to an
; low alignment load of the vector which prevents us from reliably forming a
; narrow load.
Match new shuffle codegen for MOVHPD patterns Add patterns to match SSE (shufpd) and AVX (vpermilpd) shuffle codegen when storing the high element of a v2f64. The existing patterns were only checking for an unpckh type of shuffle. http://llvm.org/bugs/show_bug.cgi?id=21791 Differential Revision: http://reviews.llvm.org/D6586 llvm-svn: 223929
2014-12-11 00:58:54 +08:00
; The expected codegen is identical for the AVX case except
; load/store instructions will have a leading 'v', so we don't
; need to special-case the checks.
[SDAG] Re-instate r215611 with a fix to a pesky X86 DAG combine. This combine is essentially combining target-specific nodes back into target independent nodes that it "knows" will be combined yet again by a target independent DAG combine into a different set of target-independent nodes that are legal (not custom though!) and thus "ok". This seems... deeply flawed. The crux of the problem is that we don't combine un-legalized shuffles that are introduced by legalizing other operations, and thus we don't see a very profitable combine opportunity. So the backend just forces the input to that combine to re-appear. However, for this to work, the conditions detected to re-form the unlegalized nodes must be *exactly* right. Previously, failing this would have caused poor code (if you're lucky) or a crasher when we failed to select instructions. After r215611 we would fall back into the legalizer. In some cases, this just "fixed" the crasher by produces bad code. But in the test case added it caused the legalizer and the dag combiner to iterate forever. The fix is to make the alignment checking in the x86 side of things match the alignment checking in the generic DAG combine exactly. This isn't really a satisfying or principled fix, but it at least make the code work as intended. It also highlights that it would be nice to detect the availability of under aligned loads for a given type rather than bailing on this optimization. I've left a FIXME to document this. Original commit message for r215611 which covers the rest of the chang: [SDAG] Fix a case where we would iteratively legalize a node during combining by replacing it with something else but not re-process the node afterward to remove it. In a truly remarkable stroke of bad luck, this would (in the test case attached) end up getting some other node combined into it without ever getting re-processed. By adding it back on to the worklist, in addition to deleting the dead nodes more quickly we also ensure that if it *stops* being dead for any reason it makes it back through the legalizer. Without this, the test case will end up failing during instruction selection due to an and node with a type we don't have an instruction pattern for. It took many million runs of the shuffle fuzz tester to find this. llvm-svn: 216537
2014-08-27 19:22:16 +08:00
define void @t3() {
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X32-SSE2-LABEL: t3:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; X32-SSE2: # %bb.0: # %bb
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X32-SSE2-NEXT: movupd (%eax), %xmm0
; X32-SSE2-NEXT: movhpd %xmm0, (%eax)
;
; X64-SSSE3-LABEL: t3:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; X64-SSSE3: # %bb.0: # %bb
[X86][SSE] Lower 128-bit MOVDDUP with existing VBROADCAST mechanisms We have a number of useful lowering strategies for VBROADCAST instructions (both from memory and register element 0) which the 128-bit form of the MOVDDUP instruction can make use of. This patch tweaks lowerVectorShuffleAsBroadcast to enable it to broadcast 2f64 args using MOVDDUP as well. It does require a slight tweak to the lowerVectorShuffleAsBroadcast mechanism as the existing MOVDDUP lowering uses isShuffleEquivalent which can match binary shuffles that can lower to (unary) broadcasts. Differential Revision: http://reviews.llvm.org/D17680 llvm-svn: 262478
2016-03-02 19:43:05 +08:00
; X64-SSSE3-NEXT: movddup {{.*#+}} xmm0 = mem[0,0]
; X64-SSSE3-NEXT: movlpd %xmm0, (%rax)
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
;
; X64-AVX-LABEL: t3:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; X64-AVX: # %bb.0: # %bb
[X86][SSE] Lower 128-bit MOVDDUP with existing VBROADCAST mechanisms We have a number of useful lowering strategies for VBROADCAST instructions (both from memory and register element 0) which the 128-bit form of the MOVDDUP instruction can make use of. This patch tweaks lowerVectorShuffleAsBroadcast to enable it to broadcast 2f64 args using MOVDDUP as well. It does require a slight tweak to the lowerVectorShuffleAsBroadcast mechanism as the existing MOVDDUP lowering uses isShuffleEquivalent which can match binary shuffles that can lower to (unary) broadcasts. Differential Revision: http://reviews.llvm.org/D17680 llvm-svn: 262478
2016-03-02 19:43:05 +08:00
; X64-AVX-NEXT: vmovddup {{.*#+}} xmm0 = mem[0,0]
; X64-AVX-NEXT: vmovlpd %xmm0, (%rax)
[SDAG] Re-instate r215611 with a fix to a pesky X86 DAG combine. This combine is essentially combining target-specific nodes back into target independent nodes that it "knows" will be combined yet again by a target independent DAG combine into a different set of target-independent nodes that are legal (not custom though!) and thus "ok". This seems... deeply flawed. The crux of the problem is that we don't combine un-legalized shuffles that are introduced by legalizing other operations, and thus we don't see a very profitable combine opportunity. So the backend just forces the input to that combine to re-appear. However, for this to work, the conditions detected to re-form the unlegalized nodes must be *exactly* right. Previously, failing this would have caused poor code (if you're lucky) or a crasher when we failed to select instructions. After r215611 we would fall back into the legalizer. In some cases, this just "fixed" the crasher by produces bad code. But in the test case added it caused the legalizer and the dag combiner to iterate forever. The fix is to make the alignment checking in the x86 side of things match the alignment checking in the generic DAG combine exactly. This isn't really a satisfying or principled fix, but it at least make the code work as intended. It also highlights that it would be nice to detect the availability of under aligned loads for a given type rather than bailing on this optimization. I've left a FIXME to document this. Original commit message for r215611 which covers the rest of the chang: [SDAG] Fix a case where we would iteratively legalize a node during combining by replacing it with something else but not re-process the node afterward to remove it. In a truly remarkable stroke of bad luck, this would (in the test case attached) end up getting some other node combined into it without ever getting re-processed. By adding it back on to the worklist, in addition to deleting the dead nodes more quickly we also ensure that if it *stops* being dead for any reason it makes it back through the legalizer. Without this, the test case will end up failing during instruction selection due to an and node with a type we don't have an instruction pattern for. It took many million runs of the shuffle fuzz tester to find this. llvm-svn: 216537
2014-08-27 19:22:16 +08:00
bb:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%tmp13 = load <2 x double>, <2 x double>* undef, align 1
[SDAG] Re-instate r215611 with a fix to a pesky X86 DAG combine. This combine is essentially combining target-specific nodes back into target independent nodes that it "knows" will be combined yet again by a target independent DAG combine into a different set of target-independent nodes that are legal (not custom though!) and thus "ok". This seems... deeply flawed. The crux of the problem is that we don't combine un-legalized shuffles that are introduced by legalizing other operations, and thus we don't see a very profitable combine opportunity. So the backend just forces the input to that combine to re-appear. However, for this to work, the conditions detected to re-form the unlegalized nodes must be *exactly* right. Previously, failing this would have caused poor code (if you're lucky) or a crasher when we failed to select instructions. After r215611 we would fall back into the legalizer. In some cases, this just "fixed" the crasher by produces bad code. But in the test case added it caused the legalizer and the dag combiner to iterate forever. The fix is to make the alignment checking in the x86 side of things match the alignment checking in the generic DAG combine exactly. This isn't really a satisfying or principled fix, but it at least make the code work as intended. It also highlights that it would be nice to detect the availability of under aligned loads for a given type rather than bailing on this optimization. I've left a FIXME to document this. Original commit message for r215611 which covers the rest of the chang: [SDAG] Fix a case where we would iteratively legalize a node during combining by replacing it with something else but not re-process the node afterward to remove it. In a truly remarkable stroke of bad luck, this would (in the test case attached) end up getting some other node combined into it without ever getting re-processed. By adding it back on to the worklist, in addition to deleting the dead nodes more quickly we also ensure that if it *stops* being dead for any reason it makes it back through the legalizer. Without this, the test case will end up failing during instruction selection due to an and node with a type we don't have an instruction pattern for. It took many million runs of the shuffle fuzz tester to find this. llvm-svn: 216537
2014-08-27 19:22:16 +08:00
%.sroa.3.24.vec.extract = extractelement <2 x double> %tmp13, i32 1
store double %.sroa.3.24.vec.extract, double* undef, align 8
unreachable
}
[X86][SSE] Bitcast assertion in XFormVExtractWithShuffleIntoLoad Minor patch to fix an issue in XFormVExtractWithShuffleIntoLoad where a load is unary shuffled, then bitcast (to a type with the same number of elements) before extracting an element. An undef was created for the second shuffle operand using the original (post-bitcasted) vector type instead of the pre-bitcasted type like the rest of the shuffle node - this was then causing an assertion on the different types later on inside SelectionDAG::getVectorShuffle. Differential Revision: http://reviews.llvm.org/D5917 llvm-svn: 220592
2014-10-25 05:04:41 +08:00
; Case where a load is unary shuffled, then bitcast (to a type with the same
; number of elements) before extractelement.
; This is testing for an assertion - the extraction was assuming that the undef
; second shuffle operand was a post-bitcast type instead of a pre-bitcast type.
define i64 @t4(<2 x double>* %a) {
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X32-SSE2-LABEL: t4:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; X32-SSE2: # %bb.0:
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X32-SSE2-NEXT: movl {{[0-9]+}}(%esp), %eax
; X32-SSE2-NEXT: movapd (%eax), %xmm0
; X32-SSE2-NEXT: shufpd {{.*#+}} xmm0 = xmm0[1,0]
; X32-SSE2-NEXT: pshufd {{.*#+}} xmm1 = xmm0[2,3,0,1]
; X32-SSE2-NEXT: movd %xmm1, %eax
[X86][SSE] Add support for combining target shuffles to SHUFPS. As discussed on D27692, the next step will be to allow cross-domain shuffles once the combined shuffle depth passes a certain point. llvm-svn: 290064
2016-12-18 22:26:02 +08:00
; X32-SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[3,1,2,3]
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X32-SSE2-NEXT: movd %xmm0, %edx
; X32-SSE2-NEXT: retl
;
; X64-SSSE3-LABEL: t4:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; X64-SSSE3: # %bb.0:
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X64-SSSE3-NEXT: movq (%rdi), %rax
; X64-SSSE3-NEXT: retq
;
; X64-AVX-LABEL: t4:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; X64-AVX: # %bb.0:
[X86][SSE] Regenerated load vector + element extraction tests. llvm-svn: 259416
2016-02-02 05:46:12 +08:00
; X64-AVX-NEXT: movq (%rdi), %rax
; X64-AVX-NEXT: retq
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%b = load <2 x double>, <2 x double>* %a, align 16
[X86][SSE] Bitcast assertion in XFormVExtractWithShuffleIntoLoad Minor patch to fix an issue in XFormVExtractWithShuffleIntoLoad where a load is unary shuffled, then bitcast (to a type with the same number of elements) before extracting an element. An undef was created for the second shuffle operand using the original (post-bitcasted) vector type instead of the pre-bitcasted type like the rest of the shuffle node - this was then causing an assertion on the different types later on inside SelectionDAG::getVectorShuffle. Differential Revision: http://reviews.llvm.org/D5917 llvm-svn: 220592
2014-10-25 05:04:41 +08:00
%c = shufflevector <2 x double> %b, <2 x double> %b, <2 x i32> <i32 1, i32 0>
%d = bitcast <2 x double> %c to <2 x i64>
%e = extractelement <2 x i64> %d, i32 1
ret i64 %e
}