maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/AArch64/arm64-tls-dynamics.ll

176 lines
7.0 KiB
LLVM
Raw Normal View History

Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; RUN: llc -mtriple=arm64-none-linux-gnu -relocation-model=pic -aarch64-elf-ldtls-generation=1 -verify-machineinstrs < %s | FileCheck %s
; RUN: llc -mtriple=arm64-none-linux-gnu -relocation-model=pic -aarch64-elf-ldtls-generation=1 -filetype=obj < %s | llvm-objdump -r - | FileCheck --check-prefix=CHECK-RELOC %s
; RUN: llc -mtriple=arm64-none-linux-gnu -relocation-model=pic -verify-machineinstrs < %s | FileCheck --check-prefix=CHECK-NOLD %s
; RUN: llc -mtriple=arm64-none-linux-gnu -relocation-model=pic -filetype=obj < %s | llvm-objdump -r - | FileCheck --check-prefix=CHECK-NOLD-RELOC %s
[AArch64] Add Tiny Code Model for AArch64 This adds the plumbing for the Tiny code model for the AArch64 backend. This, instead of loading addresses through the normal ADRP;ADD pair used in the Small model, uses a single ADR. The 21 bit range of an ADR means that the code and its statically defined symbols need to be within 1MB of each other. This makes it mostly interesting for embedded applications where we want to fit as much as we can in as small a space as possible. Differential Revision: https://reviews.llvm.org/D49673 llvm-svn: 340397
2018-08-22 19:31:39 +08:00
; FIXME: We currently produce "small" code for the tiny model
; RUN: llc -mtriple=arm64-none-linux-gnu -relocation-model=pic -aarch64-elf-ldtls-generation=1 -code-model=tiny -verify-machineinstrs < %s | FileCheck %s
; FIXME: We currently error for the large code model
; RUN: not llc -mtriple=arm64-none-linux-gnu -relocation-model=pic -aarch64-elf-ldtls-generation=1 -code-model=large -verify-machineinstrs < %s 2>&1 | FileCheck %s --check-prefix=CHECK-LARGE
; CHECK-LARGE: ELF TLS only supported in small memory model
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
@general_dynamic_var = external thread_local global i32
define i32 @test_generaldynamic() {
; CHECK-LABEL: test_generaldynamic:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%val = load i32, i32* @general_dynamic_var
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
ret i32 %val
; CHECK: adrp x[[TLSDESC_HI:[0-9]+]], :tlsdesc:general_dynamic_var
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NEXT: ldr [[CALLEE:x[0-9]+]], [x[[TLSDESC_HI]], :tlsdesc_lo12:general_dynamic_var]
; CHECK-NEXT: add x0, x[[TLSDESC_HI]], :tlsdesc_lo12:general_dynamic_var
; CHECK-NEXT: .tlsdesccall general_dynamic_var
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
; CHECK-NEXT: blr [[CALLEE]]
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NOLD: adrp x[[TLSDESC_HI:[0-9]+]], :tlsdesc:general_dynamic_var
; CHECK-NOLD-NEXT: ldr [[CALLEE:x[0-9]+]], [x[[TLSDESC_HI]], :tlsdesc_lo12:general_dynamic_var]
; CHECK-NOLD-NEXT: add x0, x[[TLSDESC_HI]], :tlsdesc_lo12:general_dynamic_var
; CHECK-NOLD-NEXT: .tlsdesccall general_dynamic_var
; CHECK-NOLD-NEXT: blr [[CALLEE]]
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
; CHECK: mrs x[[TP:[0-9]+]], TPIDR_EL0
; CHECK: ldr w0, [x[[TP]], x0]
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NOLD: mrs x[[TP:[0-9]+]], TPIDR_EL0
; CHECK-NOLD: ldr w0, [x[[TP]], x0]
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
Update AArch64 ELF relocations to ABI 1.0 This mostly entails adding relocations, however there are a couple of changes to existing relocations: 1. R_AARCH64_NONE is defined to be zero rather than 256 R_AARCH64_NONE has been defined to be zero for a long time elsewhere e.g. binutils and glibc since the submission of the AArch64 port in 2012 so this is required for compatibility. 2. R_AARCH64_TLSDESC_ADR_PAGE renamed to R_AARCH64_TLSDESC_ADR_PAGE21 I don't think there is any way for relocation names to leak out of LLVM so this should not break anything. Tested with check-all with no regressions. llvm-svn: 222821
2014-11-26 18:49:18 +08:00
; CHECK-RELOC: R_AARCH64_TLSDESC_ADR_PAGE21
[AArch64] ILP32 Backend Relocation Support Remove "_NC" suffix and semantics from TLSDESC_LD{64,32}_LO12 and TLSDESC_ADD_LO12 relocations Rearrange ordering in AArch64.def to follow relocation encoding Fix name: R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC Add support for several "TLS", "TLSGD", and "TLSLD" relocations for ILP32 Fix return values from isNonILP32reloc Add implementations for R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC, R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC, R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC, *TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC, *TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC Modify error messages to give name of equivalent relocation in the ABI not being used, along with better checking for non-existent requested relocations. Added assembler support for "pg_hi21_nc" Relocation definitions added without implementations: R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21, R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21, R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19, R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL, R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL, R_AARCH64_P32_TLSDESC Fix encoding: R_AARCH64_P32_TLSDESC_ADR_PAGE21 Reviewers: Peter Smith Patch by: Joel Jones (jjones@cavium.com) Differential Revision: https://reviews.llvm.org/D32072 llvm-svn: 301980
2017-05-03 06:01:48 +08:00
; CHECK-RELOC: R_AARCH64_TLSDESC_LD64_LO12
; CHECK-RELOC: R_AARCH64_TLSDESC_ADD_LO12
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
; CHECK-RELOC: R_AARCH64_TLSDESC_CALL
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_ADR_PAGE21
[AArch64] ILP32 Backend Relocation Support Remove "_NC" suffix and semantics from TLSDESC_LD{64,32}_LO12 and TLSDESC_ADD_LO12 relocations Rearrange ordering in AArch64.def to follow relocation encoding Fix name: R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC Add support for several "TLS", "TLSGD", and "TLSLD" relocations for ILP32 Fix return values from isNonILP32reloc Add implementations for R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC, R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC, R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC, *TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC, *TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC Modify error messages to give name of equivalent relocation in the ABI not being used, along with better checking for non-existent requested relocations. Added assembler support for "pg_hi21_nc" Relocation definitions added without implementations: R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21, R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21, R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19, R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL, R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL, R_AARCH64_P32_TLSDESC Fix encoding: R_AARCH64_P32_TLSDESC_ADR_PAGE21 Reviewers: Peter Smith Patch by: Joel Jones (jjones@cavium.com) Differential Revision: https://reviews.llvm.org/D32072 llvm-svn: 301980
2017-05-03 06:01:48 +08:00
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_LD64_LO12
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_ADD_LO12
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_CALL
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
}
define i32* @test_generaldynamic_addr() {
; CHECK-LABEL: test_generaldynamic_addr:
ret i32* @general_dynamic_var
; CHECK: adrp x[[TLSDESC_HI:[0-9]+]], :tlsdesc:general_dynamic_var
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NEXT: ldr [[CALLEE:x[0-9]+]], [x[[TLSDESC_HI]], :tlsdesc_lo12:general_dynamic_var]
; CHECK-NEXT: add x0, x[[TLSDESC_HI]], :tlsdesc_lo12:general_dynamic_var
; CHECK-NEXT: .tlsdesccall general_dynamic_var
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
; CHECK-NEXT: blr [[CALLEE]]
; CHECK: mrs [[TP:x[0-9]+]], TPIDR_EL0
; CHECK: add x0, [[TP]], x0
Update AArch64 ELF relocations to ABI 1.0 This mostly entails adding relocations, however there are a couple of changes to existing relocations: 1. R_AARCH64_NONE is defined to be zero rather than 256 R_AARCH64_NONE has been defined to be zero for a long time elsewhere e.g. binutils and glibc since the submission of the AArch64 port in 2012 so this is required for compatibility. 2. R_AARCH64_TLSDESC_ADR_PAGE renamed to R_AARCH64_TLSDESC_ADR_PAGE21 I don't think there is any way for relocation names to leak out of LLVM so this should not break anything. Tested with check-all with no regressions. llvm-svn: 222821
2014-11-26 18:49:18 +08:00
; CHECK-RELOC: R_AARCH64_TLSDESC_ADR_PAGE21
[AArch64] ILP32 Backend Relocation Support Remove "_NC" suffix and semantics from TLSDESC_LD{64,32}_LO12 and TLSDESC_ADD_LO12 relocations Rearrange ordering in AArch64.def to follow relocation encoding Fix name: R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC Add support for several "TLS", "TLSGD", and "TLSLD" relocations for ILP32 Fix return values from isNonILP32reloc Add implementations for R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC, R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC, R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC, *TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC, *TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC Modify error messages to give name of equivalent relocation in the ABI not being used, along with better checking for non-existent requested relocations. Added assembler support for "pg_hi21_nc" Relocation definitions added without implementations: R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21, R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21, R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19, R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL, R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL, R_AARCH64_P32_TLSDESC Fix encoding: R_AARCH64_P32_TLSDESC_ADR_PAGE21 Reviewers: Peter Smith Patch by: Joel Jones (jjones@cavium.com) Differential Revision: https://reviews.llvm.org/D32072 llvm-svn: 301980
2017-05-03 06:01:48 +08:00
; CHECK-RELOC: R_AARCH64_TLSDESC_LD64_LO12
; CHECK-RELOC: R_AARCH64_TLSDESC_ADD_LO12
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
; CHECK-RELOC: R_AARCH64_TLSDESC_CALL
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_ADR_PAGE21
[AArch64] ILP32 Backend Relocation Support Remove "_NC" suffix and semantics from TLSDESC_LD{64,32}_LO12 and TLSDESC_ADD_LO12 relocations Rearrange ordering in AArch64.def to follow relocation encoding Fix name: R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC Add support for several "TLS", "TLSGD", and "TLSLD" relocations for ILP32 Fix return values from isNonILP32reloc Add implementations for R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC, R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC, R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC, *TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC, *TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC Modify error messages to give name of equivalent relocation in the ABI not being used, along with better checking for non-existent requested relocations. Added assembler support for "pg_hi21_nc" Relocation definitions added without implementations: R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21, R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21, R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19, R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL, R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL, R_AARCH64_P32_TLSDESC Fix encoding: R_AARCH64_P32_TLSDESC_ADR_PAGE21 Reviewers: Peter Smith Patch by: Joel Jones (jjones@cavium.com) Differential Revision: https://reviews.llvm.org/D32072 llvm-svn: 301980
2017-05-03 06:01:48 +08:00
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_LD64_LO12
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_ADD_LO12
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_CALL
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
}
@local_dynamic_var = external thread_local(localdynamic) global i32
define i32 @test_localdynamic() {
; CHECK-LABEL: test_localdynamic:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%val = load i32, i32* @local_dynamic_var
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
ret i32 %val
; CHECK: adrp x[[TLSDESC_HI:[0-9]+]], :tlsdesc:_TLS_MODULE_BASE_
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NEXT: ldr [[CALLEE:x[0-9]+]], [x[[TLSDESC_HI]], :tlsdesc_lo12:_TLS_MODULE_BASE_]
; CHECK-NEXT: add x0, x[[TLSDESC_HI]], :tlsdesc_lo12:_TLS_MODULE_BASE_
; CHECK-NEXT: .tlsdesccall _TLS_MODULE_BASE_
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
; CHECK-NEXT: blr [[CALLEE]]
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NEXT: add x[[TPOFF:[0-9]+]], x0, :dtprel_hi12:local_dynamic_var
; CHECK-NEXT: add x[[TPOFF]], x[[TPOFF]], :dtprel_lo12_nc:local_dynamic_var
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
; CHECK: mrs x[[TPIDR:[0-9]+]], TPIDR_EL0
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK: ldr w0, [x[[TPIDR]], x[[TPOFF]]]
; CHECK-NOLD: adrp x[[TLSDESC_HI:[0-9]+]], :tlsdesc:local_dynamic_var
; CHECK-NOLD-NEXT: ldr [[CALLEE:x[0-9]+]], [x[[TLSDESC_HI]], :tlsdesc_lo12:local_dynamic_var]
; CHECK-NOLD-NEXT: add x0, x[[TLSDESC_HI]], :tlsdesc_lo12:local_dynamic_var
; CHECK-NOLD-NEXT: .tlsdesccall local_dynamic_var
; CHECK-NOLD-NEXT: blr [[CALLEE]]
; CHECK-NOLD: mrs x[[TPIDR:[0-9]+]], TPIDR_EL0
; CHECK-NOLD: ldr w0, [x[[TPIDR]], x0]
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
Update AArch64 ELF relocations to ABI 1.0 This mostly entails adding relocations, however there are a couple of changes to existing relocations: 1. R_AARCH64_NONE is defined to be zero rather than 256 R_AARCH64_NONE has been defined to be zero for a long time elsewhere e.g. binutils and glibc since the submission of the AArch64 port in 2012 so this is required for compatibility. 2. R_AARCH64_TLSDESC_ADR_PAGE renamed to R_AARCH64_TLSDESC_ADR_PAGE21 I don't think there is any way for relocation names to leak out of LLVM so this should not break anything. Tested with check-all with no regressions. llvm-svn: 222821
2014-11-26 18:49:18 +08:00
; CHECK-RELOC: R_AARCH64_TLSDESC_ADR_PAGE21
[AArch64] ILP32 Backend Relocation Support Remove "_NC" suffix and semantics from TLSDESC_LD{64,32}_LO12 and TLSDESC_ADD_LO12 relocations Rearrange ordering in AArch64.def to follow relocation encoding Fix name: R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC Add support for several "TLS", "TLSGD", and "TLSLD" relocations for ILP32 Fix return values from isNonILP32reloc Add implementations for R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC, R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC, R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC, *TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC, *TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC Modify error messages to give name of equivalent relocation in the ABI not being used, along with better checking for non-existent requested relocations. Added assembler support for "pg_hi21_nc" Relocation definitions added without implementations: R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21, R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21, R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19, R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL, R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL, R_AARCH64_P32_TLSDESC Fix encoding: R_AARCH64_P32_TLSDESC_ADR_PAGE21 Reviewers: Peter Smith Patch by: Joel Jones (jjones@cavium.com) Differential Revision: https://reviews.llvm.org/D32072 llvm-svn: 301980
2017-05-03 06:01:48 +08:00
; CHECK-RELOC: R_AARCH64_TLSDESC_LD64_LO12
; CHECK-RELOC: R_AARCH64_TLSDESC_ADD_LO12
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
; CHECK-RELOC: R_AARCH64_TLSDESC_CALL
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-RELOC: R_AARCH64_TLSLD_ADD_DTPREL_HI12
; CHECK-RELOC: R_AARCH64_TLSLD_ADD_DTPREL_LO12_NC
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_ADR_PAGE21
[AArch64] ILP32 Backend Relocation Support Remove "_NC" suffix and semantics from TLSDESC_LD{64,32}_LO12 and TLSDESC_ADD_LO12 relocations Rearrange ordering in AArch64.def to follow relocation encoding Fix name: R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC Add support for several "TLS", "TLSGD", and "TLSLD" relocations for ILP32 Fix return values from isNonILP32reloc Add implementations for R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC, R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC, R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC, *TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC, *TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC Modify error messages to give name of equivalent relocation in the ABI not being used, along with better checking for non-existent requested relocations. Added assembler support for "pg_hi21_nc" Relocation definitions added without implementations: R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21, R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21, R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19, R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL, R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL, R_AARCH64_P32_TLSDESC Fix encoding: R_AARCH64_P32_TLSDESC_ADR_PAGE21 Reviewers: Peter Smith Patch by: Joel Jones (jjones@cavium.com) Differential Revision: https://reviews.llvm.org/D32072 llvm-svn: 301980
2017-05-03 06:01:48 +08:00
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_LD64_LO12
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_ADD_LO12
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_CALL
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
}
define i32* @test_localdynamic_addr() {
; CHECK-LABEL: test_localdynamic_addr:
; CHECK: adrp x[[TLSDESC_HI:[0-9]+]], :tlsdesc:_TLS_MODULE_BASE_
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NEXT: ldr [[CALLEE:x[0-9]+]], [x[[TLSDESC_HI]], :tlsdesc_lo12:_TLS_MODULE_BASE_]
; CHECK-NEXT: add x0, x[[TLSDESC_HI]], :tlsdesc_lo12:_TLS_MODULE_BASE_
; CHECK-NEXT: .tlsdesccall _TLS_MODULE_BASE_
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
; CHECK-NEXT: blr [[CALLEE]]
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NEXT: add x[[TPOFF:[0-9]+]], x0, :dtprel_hi12:local_dynamic_var
; CHECK-NEXT: add x[[TPOFF]], x[[TPOFF]], :dtprel_lo12_nc:local_dynamic_var
; CHECK: mrs x[[TPIDR:[0-9]+]], TPIDR_EL0
; CHECK: add x0, x[[TPIDR]], x[[TPOFF]]
; CHECK-NOLD: adrp x[[TLSDESC_HI:[0-9]+]], :tlsdesc:local_dynamic_var
; CHECK-NOLD-NEXT: ldr [[CALLEE:x[0-9]+]], [x[[TLSDESC_HI]], :tlsdesc_lo12:local_dynamic_var]
; CHECK-NOLD-NEXT: add x0, x[[TLSDESC_HI]], :tlsdesc_lo12:local_dynamic_var
; CHECK-NOLD-NEXT: .tlsdesccall local_dynamic_var
; CHECK-NOLD-NEXT: blr [[CALLEE]]
; CHECK-NOLD: mrs x[[TPIDR:[0-9]+]], TPIDR_EL0
; CHECK-NOLD: add x0, x[[TPIDR]], x0
ret i32* @local_dynamic_var
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
Update AArch64 ELF relocations to ABI 1.0 This mostly entails adding relocations, however there are a couple of changes to existing relocations: 1. R_AARCH64_NONE is defined to be zero rather than 256 R_AARCH64_NONE has been defined to be zero for a long time elsewhere e.g. binutils and glibc since the submission of the AArch64 port in 2012 so this is required for compatibility. 2. R_AARCH64_TLSDESC_ADR_PAGE renamed to R_AARCH64_TLSDESC_ADR_PAGE21 I don't think there is any way for relocation names to leak out of LLVM so this should not break anything. Tested with check-all with no regressions. llvm-svn: 222821
2014-11-26 18:49:18 +08:00
; CHECK-RELOC: R_AARCH64_TLSDESC_ADR_PAGE21
[AArch64] ILP32 Backend Relocation Support Remove "_NC" suffix and semantics from TLSDESC_LD{64,32}_LO12 and TLSDESC_ADD_LO12 relocations Rearrange ordering in AArch64.def to follow relocation encoding Fix name: R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC Add support for several "TLS", "TLSGD", and "TLSLD" relocations for ILP32 Fix return values from isNonILP32reloc Add implementations for R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC, R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC, R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC, *TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC, *TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC Modify error messages to give name of equivalent relocation in the ABI not being used, along with better checking for non-existent requested relocations. Added assembler support for "pg_hi21_nc" Relocation definitions added without implementations: R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21, R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21, R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19, R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL, R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL, R_AARCH64_P32_TLSDESC Fix encoding: R_AARCH64_P32_TLSDESC_ADR_PAGE21 Reviewers: Peter Smith Patch by: Joel Jones (jjones@cavium.com) Differential Revision: https://reviews.llvm.org/D32072 llvm-svn: 301980
2017-05-03 06:01:48 +08:00
; CHECK-RELOC: R_AARCH64_TLSDESC_LD64_LO12
; CHECK-RELOC: R_AARCH64_TLSDESC_ADD_LO12
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
; CHECK-RELOC: R_AARCH64_TLSDESC_CALL
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-RELOC: R_AARCH64_TLSLD_ADD_DTPREL_HI12
; CHECK-RELOC: R_AARCH64_TLSLD_ADD_DTPREL_LO12_NC
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_ADR_PAGE21
[AArch64] ILP32 Backend Relocation Support Remove "_NC" suffix and semantics from TLSDESC_LD{64,32}_LO12 and TLSDESC_ADD_LO12 relocations Rearrange ordering in AArch64.def to follow relocation encoding Fix name: R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC Add support for several "TLS", "TLSGD", and "TLSLD" relocations for ILP32 Fix return values from isNonILP32reloc Add implementations for R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC, R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC, R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC, *TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC, *TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC Modify error messages to give name of equivalent relocation in the ABI not being used, along with better checking for non-existent requested relocations. Added assembler support for "pg_hi21_nc" Relocation definitions added without implementations: R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21, R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21, R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19, R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL, R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL, R_AARCH64_P32_TLSDESC Fix encoding: R_AARCH64_P32_TLSDESC_ADR_PAGE21 Reviewers: Peter Smith Patch by: Joel Jones (jjones@cavium.com) Differential Revision: https://reviews.llvm.org/D32072 llvm-svn: 301980
2017-05-03 06:01:48 +08:00
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_LD64_LO12
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_ADD_LO12
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK-NOLD-RELOC: R_AARCH64_TLSDESC_CALL
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
}
; The entire point of the local-dynamic access model is to have a single call to
; the expensive resolver. Make sure we achieve that goal.
@local_dynamic_var2 = external thread_local(localdynamic) global i32
define i32 @test_localdynamic_deduplicate() {
; CHECK-LABEL: test_localdynamic_deduplicate:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%val = load i32, i32* @local_dynamic_var
%val2 = load i32, i32* @local_dynamic_var2
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
%sum = add i32 %val, %val2
ret i32 %sum
Fix PR22408 - LLVM producing AArch64 TLS relocations that GNU linkers cannot handle yet. As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers ld.bfd and ld.gold currently only support a subset of the whole range of AArch64 ELF TLS relocations. Furthermore, they assume that some of the code sequences to access thread-local variables are produced in a very specific sequence. When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize the instructions. Even if that wouldn't be the case, it's good to produce the exact sequence, as that ensures that linkers can perform optimizing relaxations. This patch: * implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang would grow an -mtls-size option to allow support for both, but that's not part of this patch. * by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation) is added to enable generation of local dynamic code sequence, but is off by default. * makes sure that the exact expected code sequence for local dynamic and general dynamic accesses is produced, by making use of a new pseudo instruction. The patch also removes two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ). llvm-svn: 231227
2015-03-04 17:12:08 +08:00
; CHECK: adrp x[[DTPREL_HI:[0-9]+]], :tlsdesc:_TLS_MODULE_BASE_
; CHECK-NEXT: ldr [[CALLEE:x[0-9]+]], [x[[DTPREL_HI]], :tlsdesc_lo12:_TLS_MODULE_BASE_]
; CHECK-NEXT: add x0, x[[TLSDESC_HI]], :tlsdesc_lo12:_TLS_MODULE_BASE
; CHECK-NEXT: .tlsdesccall _TLS_MODULE_BASE_
ARM64: initial backend import This adds a second implementation of the AArch64 architecture to LLVM, accessible in parallel via the "arm64" triple. The plan over the coming weeks & months is to merge the two into a single backend, during which time thorough code review should naturally occur. Everything will be easier with the target in-tree though, hence this commit. llvm-svn: 205090
2014-03-29 18:18:08 +08:00
; CHECK-NEXT: blr [[CALLEE]]
; CHECK-NOT: _TLS_MODULE_BASE_
; CHECK: ret
}