maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/SystemZ/frame-05.ll

220 lines
6.8 KiB
LLVM
Raw Normal View History

[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; Test saving and restoring of call-saved GPRs.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
; This function should require all GPRs, but no other spill slots. The caller
; allocates room for the GPR save slots, so we shouldn't need to allocate any
; extra space.
;
; The function only modifies the low 32 bits of each register, which in
; itself would allow STM and LM to be used instead of STMG and LMG.
; However, the ABI defines the offset of each register, so we always
; use the 64-bit form.
;
; Use a different address for the final store, so that we can check that
; %r15 isn't referenced again until after that.
define void @f1(i32 *%ptr) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f1:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: stmg %r6, %r15, 48(%r15)
; CHECK-NOT: %r15
; CHECK: .cfi_offset %r6, -112
; CHECK: .cfi_offset %r7, -104
; CHECK: .cfi_offset %r8, -96
; CHECK: .cfi_offset %r9, -88
; CHECK: .cfi_offset %r10, -80
; CHECK: .cfi_offset %r11, -72
; CHECK: .cfi_offset %r12, -64
; CHECK: .cfi_offset %r13, -56
; CHECK: .cfi_offset %r14, -48
; CHECK: .cfi_offset %r15, -40
; ...main function body...
; CHECK-NOT: %r15
; CHECK: st {{.*}}, 4(%r2)
; CHECK: lmg %r6, %r15, 48(%r15)
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%l0 = load volatile i32 , i32 *%ptr
%l1 = load volatile i32 , i32 *%ptr
%l3 = load volatile i32 , i32 *%ptr
%l4 = load volatile i32 , i32 *%ptr
%l5 = load volatile i32 , i32 *%ptr
%l6 = load volatile i32 , i32 *%ptr
%l7 = load volatile i32 , i32 *%ptr
%l8 = load volatile i32 , i32 *%ptr
%l9 = load volatile i32 , i32 *%ptr
%l10 = load volatile i32 , i32 *%ptr
%l11 = load volatile i32 , i32 *%ptr
%l12 = load volatile i32 , i32 *%ptr
%l13 = load volatile i32 , i32 *%ptr
%l14 = load volatile i32 , i32 *%ptr
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
%add0 = add i32 %l0, %l0
%add1 = add i32 %l1, %add0
%add3 = add i32 %l3, %add1
%add4 = add i32 %l4, %add3
%add5 = add i32 %l5, %add4
%add6 = add i32 %l6, %add5
%add7 = add i32 %l7, %add6
%add8 = add i32 %l8, %add7
%add9 = add i32 %l9, %add8
%add10 = add i32 %l10, %add9
%add11 = add i32 %l11, %add10
%add12 = add i32 %l12, %add11
%add13 = add i32 %l13, %add12
%add14 = add i32 %l14, %add13
store volatile i32 %add0, i32 *%ptr
store volatile i32 %add1, i32 *%ptr
store volatile i32 %add3, i32 *%ptr
store volatile i32 %add4, i32 *%ptr
store volatile i32 %add5, i32 *%ptr
store volatile i32 %add6, i32 *%ptr
store volatile i32 %add7, i32 *%ptr
store volatile i32 %add8, i32 *%ptr
store volatile i32 %add9, i32 *%ptr
store volatile i32 %add10, i32 *%ptr
store volatile i32 %add11, i32 *%ptr
store volatile i32 %add12, i32 *%ptr
store volatile i32 %add13, i32 *%ptr
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%final = getelementptr i32, i32 *%ptr, i32 1
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
store volatile i32 %add14, i32 *%final
ret void
}
; Like f1, but requires one fewer GPR. We allocate the call-saved GPRs
; from %r14 down, so that the STMG/LMG sequences aren't any longer than
; they need to be.
define void @f2(i32 *%ptr) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f2:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: stmg %r7, %r15, 56(%r15)
; CHECK-NOT: %r15
; CHECK: .cfi_offset %r7, -104
; CHECK: .cfi_offset %r8, -96
; CHECK: .cfi_offset %r9, -88
; CHECK: .cfi_offset %r10, -80
; CHECK: .cfi_offset %r11, -72
; CHECK: .cfi_offset %r12, -64
; CHECK: .cfi_offset %r13, -56
; CHECK: .cfi_offset %r14, -48
; CHECK: .cfi_offset %r15, -40
; ...main function body...
; CHECK-NOT: %r15
; CHECK-NOT: %r6
; CHECK: st {{.*}}, 4(%r2)
; CHECK: lmg %r7, %r15, 56(%r15)
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%l0 = load volatile i32 , i32 *%ptr
%l1 = load volatile i32 , i32 *%ptr
%l3 = load volatile i32 , i32 *%ptr
%l4 = load volatile i32 , i32 *%ptr
%l5 = load volatile i32 , i32 *%ptr
%l7 = load volatile i32 , i32 *%ptr
%l8 = load volatile i32 , i32 *%ptr
%l9 = load volatile i32 , i32 *%ptr
%l10 = load volatile i32 , i32 *%ptr
%l11 = load volatile i32 , i32 *%ptr
%l12 = load volatile i32 , i32 *%ptr
%l13 = load volatile i32 , i32 *%ptr
%l14 = load volatile i32 , i32 *%ptr
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
%add0 = add i32 %l0, %l0
%add1 = add i32 %l1, %add0
%add3 = add i32 %l3, %add1
%add4 = add i32 %l4, %add3
%add5 = add i32 %l5, %add4
%add7 = add i32 %l7, %add5
%add8 = add i32 %l8, %add7
%add9 = add i32 %l9, %add8
%add10 = add i32 %l10, %add9
%add11 = add i32 %l11, %add10
%add12 = add i32 %l12, %add11
%add13 = add i32 %l13, %add12
%add14 = add i32 %l14, %add13
store volatile i32 %add0, i32 *%ptr
store volatile i32 %add1, i32 *%ptr
store volatile i32 %add3, i32 *%ptr
store volatile i32 %add4, i32 *%ptr
store volatile i32 %add5, i32 *%ptr
store volatile i32 %add7, i32 *%ptr
store volatile i32 %add8, i32 *%ptr
store volatile i32 %add9, i32 *%ptr
store volatile i32 %add10, i32 *%ptr
store volatile i32 %add11, i32 *%ptr
store volatile i32 %add12, i32 *%ptr
store volatile i32 %add13, i32 *%ptr
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%final = getelementptr i32, i32 *%ptr, i32 1
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
store volatile i32 %add14, i32 *%final
ret void
}
; Like f1, but only needs one call-saved GPR, which ought to be %r14.
define void @f3(i32 *%ptr) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f3:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: stmg %r14, %r15, 112(%r15)
; CHECK-NOT: %r15
; CHECK: .cfi_offset %r14, -48
; CHECK: .cfi_offset %r15, -40
; ...main function body...
; CHECK-NOT: %r15
; CHECK-NOT: %r6
; CHECK-NOT: %r7
; CHECK-NOT: %r8
; CHECK-NOT: %r9
; CHECK-NOT: %r10
; CHECK-NOT: %r11
; CHECK-NOT: %r12
; CHECK-NOT: %r13
; CHECK: st {{.*}}, 4(%r2)
; CHECK: lmg %r14, %r15, 112(%r15)
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%l0 = load volatile i32 , i32 *%ptr
%l1 = load volatile i32 , i32 *%ptr
%l3 = load volatile i32 , i32 *%ptr
%l4 = load volatile i32 , i32 *%ptr
%l5 = load volatile i32 , i32 *%ptr
%l14 = load volatile i32 , i32 *%ptr
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
%add0 = add i32 %l0, %l0
%add1 = add i32 %l1, %add0
%add3 = add i32 %l3, %add1
%add4 = add i32 %l4, %add3
%add5 = add i32 %l5, %add4
%add14 = add i32 %l14, %add5
store volatile i32 %add0, i32 *%ptr
store volatile i32 %add1, i32 *%ptr
store volatile i32 %add3, i32 *%ptr
store volatile i32 %add4, i32 *%ptr
store volatile i32 %add5, i32 *%ptr
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%final = getelementptr i32, i32 *%ptr, i32 1
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
store volatile i32 %add14, i32 *%final
ret void
}
; This function should use all call-clobbered GPRs but no call-saved ones.
; It shouldn't need to touch the stack at all.
define void @f4(i32 *%ptr) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f4:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-NOT: %r15
; CHECK-NOT: %r6
; CHECK-NOT: %r7
; CHECK-NOT: %r8
; CHECK-NOT: %r9
; CHECK-NOT: %r10
; CHECK-NOT: %r11
; CHECK-NOT: %r12
; CHECK-NOT: %r13
; CHECK: br %r14
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%l0 = load volatile i32 , i32 *%ptr
%l1 = load volatile i32 , i32 *%ptr
%l3 = load volatile i32 , i32 *%ptr
%l4 = load volatile i32 , i32 *%ptr
%l5 = load volatile i32 , i32 *%ptr
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
%add0 = add i32 %l0, %l0
%add1 = add i32 %l1, %add0
%add3 = add i32 %l3, %add1
%add4 = add i32 %l4, %add3
%add5 = add i32 %l5, %add4
store volatile i32 %add0, i32 *%ptr
store volatile i32 %add1, i32 *%ptr
store volatile i32 %add3, i32 *%ptr
store volatile i32 %add4, i32 *%ptr
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%final = getelementptr i32, i32 *%ptr, i32 1
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
store volatile i32 %add5, i32 *%final
ret void
}