maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/lldb/source/Core/Debugger.cpp

3378 lines
147 KiB
C++
Raw Normal View History

Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
//===-- Debugger.cpp --------------------------------------------*- C++ -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
Fix Linux build warnings due to redefinition of macros: - add new header lldb-python.h to be included before other system headers - short term fix (eventually python dependencies must be cleaned up) Patch by Matt Kopec! llvm-svn: 169341
2012-12-05 08:20:57 +08:00
#include "lldb/lldb-python.h"
Committing type format code for Enrico Granata. This commit adds a new top level command named "type". Currently this command implements three commands: type format add <format> <typename1> [<typename2> ...] type format delete <typename1> [<typename2> ...] type format list [<typename1> [<typename2>] ...] This allows you to specify the default format that will be used to display types when you use "frame variable" or "expression", or the SBValue classes. Examples: // Format uint*_t as hex type format add x uint16_t uint32_t uint64_t // Format intptr_t as a pointer type format add p intptr_t The format characters are the same as "printf" for the most part with many additions. These format character specifiers are also used in many other commands ("frame variable" for one). The current list of format characters include: a - char buffer b - binary B - boolean c - char C - printable char d - signed decimal e - float f - float g - float i - signed decimal I - complex integer o - octal O - OSType p - pointer s - c-string u - unsigned decimal x - hex X - complex float y - bytes Y - bytes with ASCII llvm-svn: 133728
2011-06-24 01:59:56 +08:00
#include "lldb/Core/Debugger.h"
#include <map>
This commit adds a new top subcommand "summary" to command type named "type". Currently this command implements three commands: type summary add <format> <typename1> [<typename2> ...] type summary delete <typename1> [<typename2> ...] type summary list [<typename1> [<typename2>] ...] type summary clear This allows you to specify the default format that will be used to display summaries for variables, shown when you use "frame variable" or "expression", or the SBValue classes. Examples: type summary add "x = ${var.x}" Point type summary list type summary add --one-liner SimpleType llvm-svn: 134108
2011-06-30 06:27:15 +08:00
#include "clang/AST/DeclCXX.h"
#include "clang/AST/Type.h"
Initial merge of some of the iOS 8 / Mac OS X Yosemite specific lldb support. I'll be doing more testing & cleanup but I wanted to get the initial checkin done. This adds a new SBExpressionOptions::SetLanguage API for selecting a language of an expression. I added adds a new SBThread::GetInfoItemByPathString for retriving information about a thread from that thread's StructuredData. I added a new StructuredData class for representing key-value/array/dictionary information (e.g. JSON formatted data). Helper functions to read JSON and create a StructuredData object, and to print a StructuredData object in JSON format are included. A few Cocoa / Cocoa Touch data formatters were updated by Enrico to track changes in iOS 8 / Yosemite. Before we query a thread's extended information, the system runtime may provide hints to the remote debug stub that it will use to retrieve values out of runtime structures. I added a new SystemRuntime method AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add key-value type data to the initial request that we send to the remote stub. The thread-format formatter string can now retrieve values out of a thread's extended info structured data. The default thread-format string picks up two of these - thread.info.activity.name and thread.info.trace_messages. I added a new "jThreadExtendedInfo" packet in debugserver; I will add documentation to the lldb-gdb-remote.txt doc soon. It accepts JSON formatted arguments (most importantly, "thread":threadnum) and it returns a variety of information regarding the thread to lldb in JSON format. This JSON return is scanned into a StructuredData object that is associated with the thread; UI layers can query the thread's StructuredData to see if key-values are present, and if so, show them to the user. These key-values are likely to be specific to different targets with some commonality among many targets. For instance, many targets will be able to advertise the pthread_t value for a thread. I added an initial rough cut of "thread info" command which will print the information about a thread from the jThreadExtendedInfo result. I need to do more work to make this format reasonably. Han Ming added calls into the pmenergy and pmsample libraries if debugserver is run on Mac OS X Yosemite to get information about the inferior's power use. I added support to debugserver for gathering the Genealogy information about threads, if it exists, and returning it in the jThreadExtendedInfo JSON result. llvm-svn: 210874
2014-06-13 10:37:02 +08:00
#include "llvm/ADT/StringRef.h"
This commit adds a new top subcommand "summary" to command type named "type". Currently this command implements three commands: type summary add <format> <typename1> [<typename2> ...] type summary delete <typename1> [<typename2> ...] type summary list [<typename1> [<typename2>] ...] type summary clear This allows you to specify the default format that will be used to display summaries for variables, shown when you use "frame variable" or "expression", or the SBValue classes. Examples: type summary add "x = ${var.x}" Point type summary list type summary add --one-liner SimpleType llvm-svn: 134108
2011-06-30 06:27:15 +08:00
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
#include "lldb/lldb-private.h"
<rdar://problem/11757916> Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes: - Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file". - modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly - Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was. - modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile() Cleaned up header includes a bit as well. llvm-svn: 162860
2012-08-30 05:13:06 +08:00
#include "lldb/Core/Module.h"
Added the infrastructure necessary for plug-ins to be able to add their own settings instead of having settings added to existing ones. In particular "target.disable-kext-loading" was added to "target" where it should actually be specific to the the dynamic loader plugin. Now the plug-in manager has the ability to create settings at the root level starting with "plugin". Each plug-in type can add new sub dictionaries, and then each plug-in can register a setting dictionary under its own short name. For example the DynamicLoaderDarwinKernel plug-in now registers a setting dictionary at: plugin dynamic-loader macosx-kernel (bool) disable-kext-loading To settings can be set using: (lldb) settings set plugin.dynamic-loader.macosx-kernel.disable-kext-loading true I currently only hooked up the DynamicLoader plug-ins, but the code is very easy to duplicate when and if we need settings for other plug-ins. llvm-svn: 166294
2012-10-20 02:02:49 +08:00
#include "lldb/Core/PluginManager.h"
While implementing unwind information using UnwindAssemblyInstEmulation I ran into some cleanup I have been wanting to do when reading/writing registers. Previously all RegisterContext subclasses would need to implement: virtual bool ReadRegisterBytes (uint32_t reg, DataExtractor &data); virtual bool WriteRegisterBytes (uint32_t reg, DataExtractor &data, uint32_t data_offset = 0); There is now a new class specifically designed to hold register values: lldb_private::RegisterValue The new register context calls that subclasses must implement are: virtual bool ReadRegister (const RegisterInfo *reg_info, RegisterValue &reg_value) = 0; virtual bool WriteRegister (const RegisterInfo *reg_info, const RegisterValue &reg_value) = 0; The RegisterValue class must be big enough to handle any register value. The class contains an enumeration for the value type, and then a union for the data value. Any integer/float values are stored directly in an appropriate host integer/float. Anything bigger is stored in a byte buffer that has a length and byte order. The RegisterValue class also knows how to copy register value bytes into in a buffer with a specified byte order which can be used to write the register value down into memory, and this does the right thing when not all bytes from the register values are needed (getting a uint8 from a uint32 register value..). All RegiterContext and other sources have been switched over to using the new regiter value class. llvm-svn: 131096
2011-05-10 04:18:18 +08:00
#include "lldb/Core/RegisterValue.h"
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
#include "lldb/Core/State.h"
Added Debugger::GetAsync{Output/Error}Stream, and use it to print parse errors when we go to run a breakpoint condition. llvm-svn: 132517
2011-06-03 07:58:26 +08:00
#include "lldb/Core/StreamAsynchronousIO.h"
Add a logging mode that takes a callback and flush'es to that callback. Also add SB API's to set this callback, and to enable the log channels. llvm-svn: 151018
2012-02-21 10:23:08 +08:00
#include "lldb/Core/StreamCallback.h"
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
#include "lldb/Core/StreamFile.h"
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
#include "lldb/Core/StreamString.h"
Initial merge of some of the iOS 8 / Mac OS X Yosemite specific lldb support. I'll be doing more testing & cleanup but I wanted to get the initial checkin done. This adds a new SBExpressionOptions::SetLanguage API for selecting a language of an expression. I added adds a new SBThread::GetInfoItemByPathString for retriving information about a thread from that thread's StructuredData. I added a new StructuredData class for representing key-value/array/dictionary information (e.g. JSON formatted data). Helper functions to read JSON and create a StructuredData object, and to print a StructuredData object in JSON format are included. A few Cocoa / Cocoa Touch data formatters were updated by Enrico to track changes in iOS 8 / Yosemite. Before we query a thread's extended information, the system runtime may provide hints to the remote debug stub that it will use to retrieve values out of runtime structures. I added a new SystemRuntime method AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add key-value type data to the initial request that we send to the remote stub. The thread-format formatter string can now retrieve values out of a thread's extended info structured data. The default thread-format string picks up two of these - thread.info.activity.name and thread.info.trace_messages. I added a new "jThreadExtendedInfo" packet in debugserver; I will add documentation to the lldb-gdb-remote.txt doc soon. It accepts JSON formatted arguments (most importantly, "thread":threadnum) and it returns a variety of information regarding the thread to lldb in JSON format. This JSON return is scanned into a StructuredData object that is associated with the thread; UI layers can query the thread's StructuredData to see if key-values are present, and if so, show them to the user. These key-values are likely to be specific to different targets with some commonality among many targets. For instance, many targets will be able to advertise the pthread_t value for a thread. I added an initial rough cut of "thread info" command which will print the information about a thread from the jThreadExtendedInfo result. I need to do more work to make this format reasonably. Han Ming added calls into the pmenergy and pmsample libraries if debugserver is run on Mac OS X Yosemite to get information about the inferior's power use. I added support to debugserver for gathering the Genealogy information about threads, if it exists, and returning it in the jThreadExtendedInfo JSON result. llvm-svn: 210874
2014-06-13 10:37:02 +08:00
#include "lldb/Core/StructuredData.h"
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
#include "lldb/Core/Timer.h"
This commit adds a new top subcommand "summary" to command type named "type". Currently this command implements three commands: type summary add <format> <typename1> [<typename2> ...] type summary delete <typename1> [<typename2> ...] type summary list [<typename1> [<typename2>] ...] type summary clear This allows you to specify the default format that will be used to display summaries for variables, shown when you use "frame variable" or "expression", or the SBValue classes. Examples: type summary add "x = ${var.x}" Point type summary list type summary add --one-liner SimpleType llvm-svn: 134108
2011-06-30 06:27:15 +08:00
#include "lldb/Core/ValueObject.h"
Added a new thread and frame format that can be used to display a function name + arguments when the data is available. It seems to work really well, but some more testing is needed before we make this on by default. The new function format name is: ${function.name-with-args} To see how to use these formats see the website: http://lldb.llvm.org/formats.html Here is a sample backtrace of debugging LLDB with LLDB using this new format value: (lldb) thread backtrace all * thread #1: tid = 0x2203, 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10, stop reason = signal SIGINT, name = <lldb.driver.main-thread>, queue = com.apple.main-thread frame #0: 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10 frame #1: 0x00007fff884ae274 libsystem_c.dylib _pthread_cond_wait + 840 frame #2: 0x00000001010778ea LLDB lldb_private::Condition::Wait(this=0x0000000104846770, mutex=0x0000000104846730, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 138 at Condition.cpp:92 frame #3: 0x0000000101244c21 LLDB lldb_private::Predicate<bool>::WaitForValueEqualTo(this=0x0000000104846728, value=true, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 209 at Predicate.h:317 frame #4: 0x0000000100f6eeb2 LLDB lldb_private::Listener::WaitForEventsInternal(this=0x0000000104846660, timeout=0x0000000000000000, broadcaster=0x0000000000000000, broadcaster_names=0x0000000000000000, num_broadcaster_names=0x00000000, event_type_mask=0x00000000, event_sp=0x00007fff5fbfe030) + 386 at Listener.cpp:388 frame #5: 0x0000000100f6f231 LLDB lldb_private::Listener::WaitForEvent(this=0x0000000104846660, timeout=0x0000000000000000, event_sp=0x00007fff5fbfe030) + 81 at Listener.cpp:436 frame #6: 0x0000000100098dcd LLDB lldb::SBListener::WaitForEvent(this=0x00007fff5fbff0f0, timeout_secs=0xffffffff, event=0x00007fff5fbfe430) + 685 at SBListener.cpp:181 frame #7: 0x000000010000628c lldb Driver::MainLoop(this=0x00007fff5fbff620) + 5244 at Driver.cpp:1325 frame #8: 0x0000000100006ca3 lldb main(argc=1, argv=0x00007fff5fbff758, envp=0x00007fff5fbff768) + 419 at Driver.cpp:1460 frame #9: 0x0000000100000d54 lldb start + 52 thread #3: tid = 0x2703, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.debugger.input> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x000000010524d040, timeout_usec=0x004c4b40, error_ptr=0x0000000105640a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x000000010524d040, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000104846270, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000104846270) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001045f6650) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #4: tid = 0x2803, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x0000000105700370, timeout_usec=0x004c4b40, error_ptr=0x00000001056c3a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x0000000105700370, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105700000, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105700000) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x0000000105700430) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #5: tid = 0x2903, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline_output> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x00000001057178f0, timeout_usec=0x004c4b40, error_ptr=0x0000000105980a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x00000001057178f0, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105717580, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105717580) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179b0) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #6: tid = 0x2a03, 0x00007fff88a18af2 libsystem_kernel.dylib read + 10, name = <lldb.driver.commandline_io> frame #0: 0x00007fff88a18af2 libsystem_kernel.dylib read + 10 frame #1: 0x0000000100050c3b libedit.3.dylib read_init + 247 frame #2: 0x0000000100050e96 libedit.3.dylib el_wgetc + 155 frame #3: 0x000000010005115d libedit.3.dylib el_wgets + 578 frame #4: 0x000000010005debc libedit.3.dylib el_gets + 37 frame #5: 0x000000010000d409 lldb IOChannel::LibeditGetInput(this=0x0000000105700490, new_line=0x0000000105a03db0) + 89 at IOChannel.cpp:311 frame #6: 0x000000010000d8b6 lldb IOChannel::Run(this=0x0000000105700490) + 806 at IOChannel.cpp:391 frame #7: 0x000000010000d57d lldb IOChannel::IOReadThread(ptr=0x0000000105700490) + 29 at IOChannel.cpp:345 frame #8: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179f0) + 227 at Host.cpp:549 frame #9: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #10: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 (lldb) llvm-svn: 148110
2012-01-13 16:39:16 +08:00
#include "lldb/Core/ValueObjectVariable.h"
<rdar://problem/12978143> Data formatters now cache themselves. This commit provides a new formatter cache mechanism. Upon resolving a formatter (summary or synthetic), LLDB remembers the resolution for later faster retrieval. Also moved the data formatters subsystem from the core to its own group and folder for easier management, and done some code reorganization. The ObjC runtime v1 now returns a class name if asked for the dynamic type of an object. This is required for formatters caching to work with the v1 runtime. Lastly, this commit disposes of the old hack where ValueObjects had to remember whether they were queried for formatters with their static or dynamic type. Now the ValueObjectDynamicValue class works well enough that we can use its dynamic value setting for the same purpose. llvm-svn: 173728
2013-01-29 07:47:25 +08:00
#include "lldb/DataFormatters/DataVisualization.h"
#include "lldb/DataFormatters/FormatManager.h"
<rdar://problem/14862302> For small structs, the frame format now prints them as one-liners This follows the same definition that frame variable does for deciding what a "small struct" is, and as such should be fairly consistent with the variable display in general llvm-svn: 204762
2014-03-26 06:03:52 +08:00
#include "lldb/DataFormatters/TypeSummary.h"
Move ConnectionFileDescriptor to platform-specific Host directory. As part of getting ConnectionFileDescriptor working on Windows, there is going to be alot of platform specific work to be done. As a result, the implementation is moving into Host. This patch performs the code move and fixes up call-sites appropriately. Reviewed by: Greg Clayton Differential Revision: http://reviews.llvm.org/D5548 llvm-svn: 219143
2014-10-07 05:22:36 +08:00
#include "lldb/Host/ConnectionFileDescriptor.h"
Move Host::GetLLDBPath to HostInfo. This continues the effort to get Host code moved over to HostInfo, and removes many more instances of preprocessor defines along the way. llvm-svn: 216195
2014-08-22 01:29:12 +08:00
#include "lldb/Host/HostInfo.h"
Abtract terminal stuff into a new lldb_private::Terminal class where the implementation is hidden in the host layer. This avoids a slew of "#if LLDB_CONFIG_TERMIOS_SUPPORTED" statements in the code and keeps things cleaner. llvm-svn: 125057
2011-02-08 07:24:47 +08:00
#include "lldb/Host/Terminal.h"
Create a HostThread abstraction. This patch moves creates a thread abstraction that represents a thread running inside the LLDB process. This is a replacement for otherwise using lldb::thread_t, and provides a platform agnostic interface to managing these threads. Differential Revision: http://reviews.llvm.org/D5198 Reviewed by: Jim Ingham llvm-svn: 217460
2014-09-10 04:54:56 +08:00
#include "lldb/Host/ThreadLauncher.h"
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
#include "lldb/Interpreter/CommandInterpreter.h"
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
#include "lldb/Interpreter/OptionValueSInt64.h"
#include "lldb/Interpreter/OptionValueString.h"
<rdar://problem/11757916> Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes: - Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file". - modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly - Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was. - modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile() Cleaned up header includes a bit as well. llvm-svn: 162860
2012-08-30 05:13:06 +08:00
#include "lldb/Symbol/ClangASTContext.h"
#include "lldb/Symbol/CompileUnit.h"
#include "lldb/Symbol/Function.h"
#include "lldb/Symbol/Symbol.h"
Added a new thread and frame format that can be used to display a function name + arguments when the data is available. It seems to work really well, but some more testing is needed before we make this on by default. The new function format name is: ${function.name-with-args} To see how to use these formats see the website: http://lldb.llvm.org/formats.html Here is a sample backtrace of debugging LLDB with LLDB using this new format value: (lldb) thread backtrace all * thread #1: tid = 0x2203, 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10, stop reason = signal SIGINT, name = <lldb.driver.main-thread>, queue = com.apple.main-thread frame #0: 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10 frame #1: 0x00007fff884ae274 libsystem_c.dylib _pthread_cond_wait + 840 frame #2: 0x00000001010778ea LLDB lldb_private::Condition::Wait(this=0x0000000104846770, mutex=0x0000000104846730, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 138 at Condition.cpp:92 frame #3: 0x0000000101244c21 LLDB lldb_private::Predicate<bool>::WaitForValueEqualTo(this=0x0000000104846728, value=true, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 209 at Predicate.h:317 frame #4: 0x0000000100f6eeb2 LLDB lldb_private::Listener::WaitForEventsInternal(this=0x0000000104846660, timeout=0x0000000000000000, broadcaster=0x0000000000000000, broadcaster_names=0x0000000000000000, num_broadcaster_names=0x00000000, event_type_mask=0x00000000, event_sp=0x00007fff5fbfe030) + 386 at Listener.cpp:388 frame #5: 0x0000000100f6f231 LLDB lldb_private::Listener::WaitForEvent(this=0x0000000104846660, timeout=0x0000000000000000, event_sp=0x00007fff5fbfe030) + 81 at Listener.cpp:436 frame #6: 0x0000000100098dcd LLDB lldb::SBListener::WaitForEvent(this=0x00007fff5fbff0f0, timeout_secs=0xffffffff, event=0x00007fff5fbfe430) + 685 at SBListener.cpp:181 frame #7: 0x000000010000628c lldb Driver::MainLoop(this=0x00007fff5fbff620) + 5244 at Driver.cpp:1325 frame #8: 0x0000000100006ca3 lldb main(argc=1, argv=0x00007fff5fbff758, envp=0x00007fff5fbff768) + 419 at Driver.cpp:1460 frame #9: 0x0000000100000d54 lldb start + 52 thread #3: tid = 0x2703, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.debugger.input> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x000000010524d040, timeout_usec=0x004c4b40, error_ptr=0x0000000105640a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x000000010524d040, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000104846270, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000104846270) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001045f6650) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #4: tid = 0x2803, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x0000000105700370, timeout_usec=0x004c4b40, error_ptr=0x00000001056c3a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x0000000105700370, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105700000, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105700000) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x0000000105700430) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #5: tid = 0x2903, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline_output> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x00000001057178f0, timeout_usec=0x004c4b40, error_ptr=0x0000000105980a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x00000001057178f0, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105717580, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105717580) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179b0) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #6: tid = 0x2a03, 0x00007fff88a18af2 libsystem_kernel.dylib read + 10, name = <lldb.driver.commandline_io> frame #0: 0x00007fff88a18af2 libsystem_kernel.dylib read + 10 frame #1: 0x0000000100050c3b libedit.3.dylib read_init + 247 frame #2: 0x0000000100050e96 libedit.3.dylib el_wgetc + 155 frame #3: 0x000000010005115d libedit.3.dylib el_wgets + 578 frame #4: 0x000000010005debc libedit.3.dylib el_gets + 37 frame #5: 0x000000010000d409 lldb IOChannel::LibeditGetInput(this=0x0000000105700490, new_line=0x0000000105a03db0) + 89 at IOChannel.cpp:311 frame #6: 0x000000010000d8b6 lldb IOChannel::Run(this=0x0000000105700490) + 806 at IOChannel.cpp:391 frame #7: 0x000000010000d57d lldb IOChannel::IOReadThread(ptr=0x0000000105700490) + 29 at IOChannel.cpp:345 frame #8: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179f0) + 227 at Host.cpp:549 frame #9: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #10: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 (lldb) llvm-svn: 148110
2012-01-13 16:39:16 +08:00
#include "lldb/Symbol/VariableList.h"
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
#include "lldb/Target/CPPLanguageRuntime.h"
#include "lldb/Target/ObjCLanguageRuntime.h"
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
#include "lldb/Target/TargetList.h"
#include "lldb/Target/Process.h"
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
#include "lldb/Target/RegisterContext.h"
Fixed internal code to not link against and code from "lldb/API/*". lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used. Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number. Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings. llvm-svn: 196141
2013-12-03 03:35:49 +08:00
#include "lldb/Target/SectionLoadList.h"
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
#include "lldb/Target/StopInfo.h"
<rdar://problem/13878726> This changes the setting target.load-script-from-symbol-file to be a ternary enum value: default (the default value) will NOT load the script files but will issue a warning suggesting workarounds yes will load the script files no will not load the script files AND will NOT issue any warning if you change the setting value from default to yes, that will then cause the script files to be loaded (the assumption is you didn't know about the setting, got a warning, and quickly want to remedy it) if you have a settings set command for this in your lldbinit file, be sure to change "true" or "false" into an appropriate "yes" or "no" value llvm-svn: 182323
2013-05-21 06:29:23 +08:00
#include "lldb/Target/Target.h"
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
#include "lldb/Target/Thread.h"
Added the ability to run expressions in any command. Expressions can be inserted in commands by using backticks: (lldb) memory read `$rsp-16` `$rsp+16` (lldb) memory read -c `(int)strlen(argv[0])` `argv[0]` The result of the expression will be inserted into the command as a sort of preprocess stage where this gets done first. We might need to tweak where this preprocess stage goes, but it is very functional already. Added ansi color support to the Debugger::FormatPrompt() so you can use things like "${ansi.fg.blue}" and "${ansi.bold}" many more. This helps in adding colors to your prompts without needing to know the ANSI color code strings. llvm-svn: 141948
2011-10-14 15:41:33 +08:00
#include "lldb/Utility/AnsiTerminal.h"
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
Update LLDB to use LLVM's DynamicLibrary. LLDB had implemented its own DynamicLibrary class for plugin support. LLVM has an equivalent mechanism, so this patch deletes the duplicated code in LLDB and updates LLDB to reference the mechanism provided by LLVM. llvm-svn: 216606
2014-08-28 04:15:09 +08:00
#include "llvm/Support/DynamicLibrary.h"
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
using namespace lldb;
using namespace lldb_private;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
static uint32_t g_shared_debugger_refcount = 0;
Add a unique ID to each debugger instance. Add functions to look up debugger by id Add global variable to lldb python module, to hold debugger id Modify embedded Python interpreter to update the global variable with the id of its current debugger. Modify the char ** typemap definition in lldb.swig to accept 'None' (for NULL) as a valid value. The point of all this is so that, when you drop into the embedded interpreter from the command interpreter (or when doing Python-based breakpoint commands), there is a way for the Python side to find/get the correct debugger instance ( by checking debugger_unique_id, then calling SBDebugger::FindDebuggerWithID on it). llvm-svn: 107287
2010-07-01 00:22:25 +08:00
static lldb::user_id_t g_unique_id = 1;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
#pragma mark Static Functions
static Mutex &
GetDebuggerListMutex ()
{
static Mutex g_mutex(Mutex::eMutexTypeRecursive);
return g_mutex;
}
typedef std::vector<DebuggerSP> DebuggerList;
static DebuggerList &
GetDebuggerList()
{
// hide the static debugger list inside a singleton accessor to avoid
Fix a few typos. llvm-svn: 211851
2014-06-27 10:42:12 +08:00
// global init constructors
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
static DebuggerList g_list;
return g_list;
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
OptionEnumValueElement
g_show_disassembly_enum_values[] =
{
{ Debugger::eStopDisassemblyTypeNever, "never", "Never show disassembly when displaying a stop context."},
{ Debugger::eStopDisassemblyTypeNoSource, "no-source", "Show disassembly when there is no source information, or the source file is missing when displaying a stop context."},
{ Debugger::eStopDisassemblyTypeAlways, "always", "Always show disassembly when displaying a stop context."},
{ 0, NULL, NULL }
};
OptionEnumValueElement
g_language_enumerators[] =
{
{ eScriptLanguageNone, "none", "Disable scripting languages."},
{ eScriptLanguagePython, "python", "Select python as the default scripting language."},
{ eScriptLanguageDefault, "default", "Select the lldb default as the default scripting language."},
Fixed an error with a static enum definition where it wasn't NULL terminate and could crash. llvm-svn: 163851
2012-09-14 07:03:20 +08:00
{ 0, NULL, NULL }
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
};
#define MODULE_WITH_FUNC "{ ${module.file.basename}{`${function.name-with-args}${function.pc-offset}}}"
#define FILE_AND_LINE "{ at ${line.file.basename}:${line.number}}"
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
#define DEFAULT_THREAD_FORMAT "thread #${thread.index}: tid = ${thread.id%tid}"\
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
"{, ${frame.pc}}"\
MODULE_WITH_FUNC\
FILE_AND_LINE\
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
"{, name = '${thread.name}'}"\
"{, queue = '${thread.queue}'}"\
Initial merge of some of the iOS 8 / Mac OS X Yosemite specific lldb support. I'll be doing more testing & cleanup but I wanted to get the initial checkin done. This adds a new SBExpressionOptions::SetLanguage API for selecting a language of an expression. I added adds a new SBThread::GetInfoItemByPathString for retriving information about a thread from that thread's StructuredData. I added a new StructuredData class for representing key-value/array/dictionary information (e.g. JSON formatted data). Helper functions to read JSON and create a StructuredData object, and to print a StructuredData object in JSON format are included. A few Cocoa / Cocoa Touch data formatters were updated by Enrico to track changes in iOS 8 / Yosemite. Before we query a thread's extended information, the system runtime may provide hints to the remote debug stub that it will use to retrieve values out of runtime structures. I added a new SystemRuntime method AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add key-value type data to the initial request that we send to the remote stub. The thread-format formatter string can now retrieve values out of a thread's extended info structured data. The default thread-format string picks up two of these - thread.info.activity.name and thread.info.trace_messages. I added a new "jThreadExtendedInfo" packet in debugserver; I will add documentation to the lldb-gdb-remote.txt doc soon. It accepts JSON formatted arguments (most importantly, "thread":threadnum) and it returns a variety of information regarding the thread to lldb in JSON format. This JSON return is scanned into a StructuredData object that is associated with the thread; UI layers can query the thread's StructuredData to see if key-values are present, and if so, show them to the user. These key-values are likely to be specific to different targets with some commonality among many targets. For instance, many targets will be able to advertise the pthread_t value for a thread. I added an initial rough cut of "thread info" command which will print the information about a thread from the jThreadExtendedInfo result. I need to do more work to make this format reasonably. Han Ming added calls into the pmenergy and pmsample libraries if debugserver is run on Mac OS X Yosemite to get information about the inferior's power use. I added support to debugserver for gathering the Genealogy information about threads, if it exists, and returning it in the jThreadExtendedInfo JSON result. llvm-svn: 210874
2014-06-13 10:37:02 +08:00
"{, activity = '${thread.info.activity.name}'}" \
"{, ${thread.info.trace_messages} messages}" \
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
"{, stop reason = ${thread.stop-reason}}"\
"{\\nReturn value: ${thread.return-value}}"\
If a hand-called function is interrupted by hitting a breakpoint, then when you continue to finish off the function call, the expression result will be included as part of the thread stop info. llvm-svn: 212506
2014-07-08 09:07:32 +08:00
"{\\nCompleted expression: ${thread.completed-expression}}"\
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
"\\n"
#define DEFAULT_FRAME_FORMAT "frame #${frame.index}: ${frame.pc}"\
MODULE_WITH_FUNC\
FILE_AND_LINE\
"\\n"
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
#define DEFAULT_DISASSEMBLY_FORMAT "${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: "
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
<rdar://problem/12022079> Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to: (lldb) b main Breakpoint created: 1: name = 'main', locations = 1 Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to: (lldb) settings set interpreter.expand-regex-aliases true (lldb) b main breakpoint set --name 'main' Breakpoint created: 1: name = 'main', locations = 1 Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean). Fixed auto completion for settings names when nothing has been type (it should show all settings). llvm-svn: 162418
2012-08-23 08:22:02 +08:00
static PropertyDefinition
g_properties[] =
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
{
{ "auto-confirm", OptionValue::eTypeBoolean, true, false, NULL, NULL, "If true all confirmation prompts will receive their default reply." },
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
{ "disassembly-format", OptionValue::eTypeString , true, 0 , DEFAULT_DISASSEMBLY_FORMAT, NULL, "The default disassembly format string to use when disassembling instruction sequences." },
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
{ "frame-format", OptionValue::eTypeString , true, 0 , DEFAULT_FRAME_FORMAT, NULL, "The default frame format string to use when displaying stack frame information for threads." },
{ "notify-void", OptionValue::eTypeBoolean, true, false, NULL, NULL, "Notify the user explicitly if an expression returns void (default: false)." },
Made it so changes to the prompt via "settings set prompt" get noticed by the command line. Added the ability for OptionValueString objects to take flags. The only flag is currently for parsing escape sequences. Not the prompt string can have escape characters translate which will allow colors in the prompt. Added functions to Args that will parse the escape sequences in a string, and also re-encode the escape sequences for display. This was looted from other parts of LLDB (the Debugger::FormatString() function). llvm-svn: 163043
2012-09-01 08:38:36 +08:00
{ "prompt", OptionValue::eTypeString , true, OptionValueString::eOptionEncodeCharacterEscapeSequences, "(lldb) ", NULL, "The debugger command line prompt displayed for the user." },
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
{ "script-lang", OptionValue::eTypeEnum , true, eScriptLanguagePython, NULL, g_language_enumerators, "The script language to be used for evaluating user-written scripts." },
{ "stop-disassembly-count", OptionValue::eTypeSInt64 , true, 4 , NULL, NULL, "The number of disassembly lines to show when displaying a stopped context." },
{ "stop-disassembly-display", OptionValue::eTypeEnum , true, Debugger::eStopDisassemblyTypeNoSource, NULL, g_show_disassembly_enum_values, "Control when to display disassembly when displaying a stopped context." },
{ "stop-line-count-after", OptionValue::eTypeSInt64 , true, 3 , NULL, NULL, "The number of sources lines to display that come after the current source line when displaying a stopped context." },
{ "stop-line-count-before", OptionValue::eTypeSInt64 , true, 3 , NULL, NULL, "The number of sources lines to display that come before the current source line when displaying a stopped context." },
{ "term-width", OptionValue::eTypeSInt64 , true, 80 , NULL, NULL, "The maximum number of columns to use for displaying text." },
{ "thread-format", OptionValue::eTypeString , true, 0 , DEFAULT_THREAD_FORMAT, NULL, "The default thread format string to use when displaying thread information." },
{ "use-external-editor", OptionValue::eTypeBoolean, true, false, NULL, NULL, "Whether to use an external editor or not." },
Add ${ansi.XX} parsing to lldb prompt, use-color setting, and -no-use-colors command line options. settings set use-color [false|true] settings set prompt "${ansi.bold}${ansi.fg.green}(lldb)${ansi.normal} " also "--no-use-colors" on the command prompt llvm-svn: 182609
2013-05-24 04:47:45 +08:00
{ "use-color", OptionValue::eTypeBoolean, true, true , NULL, NULL, "Whether to use Ansi color codes or not." },
Renaming the setting to enable/disable automatic one-lining of summaries as auto-one-line-summaries llvm-svn: 193801
2013-11-01 05:01:07 +08:00
{ "auto-one-line-summaries", OptionValue::eTypeBoolean, true, true, NULL, NULL, "If true, LLDB will automatically display small structs in one-liner format (default: true)." },
Added the infrastructure necessary for plug-ins to be able to add their own settings instead of having settings added to existing ones. In particular "target.disable-kext-loading" was added to "target" where it should actually be specific to the the dynamic loader plugin. Now the plug-in manager has the ability to create settings at the root level starting with "plugin". Each plug-in type can add new sub dictionaries, and then each plug-in can register a setting dictionary under its own short name. For example the DynamicLoaderDarwinKernel plug-in now registers a setting dictionary at: plugin dynamic-loader macosx-kernel (bool) disable-kext-loading To settings can be set using: (lldb) settings set plugin.dynamic-loader.macosx-kernel.disable-kext-loading true I currently only hooked up the DynamicLoader plug-ins, but the code is very easy to duplicate when and if we need settings for other plug-ins. llvm-svn: 166294
2012-10-20 02:02:49 +08:00
{ NULL, OptionValue::eTypeInvalid, true, 0 , NULL, NULL, NULL }
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
};
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
enum
{
ePropertyAutoConfirm = 0,
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
ePropertyDisassemblyFormat,
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
ePropertyFrameFormat,
ePropertyNotiftVoid,
ePropertyPrompt,
ePropertyScriptLanguage,
ePropertyStopDisassemblyCount,
ePropertyStopDisassemblyDisplay,
ePropertyStopLineCountAfter,
ePropertyStopLineCountBefore,
ePropertyTerminalWidth,
ePropertyThreadFormat,
Add ${ansi.XX} parsing to lldb prompt, use-color setting, and -no-use-colors command line options. settings set use-color [false|true] settings set prompt "${ansi.bold}${ansi.fg.green}(lldb)${ansi.normal} " also "--no-use-colors" on the command prompt llvm-svn: 182609
2013-05-24 04:47:45 +08:00
ePropertyUseExternalEditor,
ePropertyUseColor,
Renaming the setting to enable/disable automatic one-lining of summaries as auto-one-line-summaries llvm-svn: 193801
2013-11-01 05:01:07 +08:00
ePropertyAutoOneLineSummaries
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
};
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
Fixed internal code to not link against and code from "lldb/API/*". lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used. Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number. Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings. llvm-svn: 196141
2013-12-03 03:35:49 +08:00
Debugger::LoadPluginCallbackType Debugger::g_load_plugin_callback = NULL;
Made it so changes to the prompt via "settings set prompt" get noticed by the command line. Added the ability for OptionValueString objects to take flags. The only flag is currently for parsing escape sequences. Not the prompt string can have escape characters translate which will allow colors in the prompt. Added functions to Args that will parse the escape sequences in a string, and also re-encode the escape sequences for display. This was looted from other parts of LLDB (the Debugger::FormatString() function). llvm-svn: 163043
2012-09-01 08:38:36 +08:00
Error
Debugger::SetPropertyValue (const ExecutionContext *exe_ctx,
VarSetOperationType op,
const char *property_path,
const char *value)
{
<rdar://problem/13878726> This changes the setting target.load-script-from-symbol-file to be a ternary enum value: default (the default value) will NOT load the script files but will issue a warning suggesting workarounds yes will load the script files no will not load the script files AND will NOT issue any warning if you change the setting value from default to yes, that will then cause the script files to be loaded (the assumption is you didn't know about the setting, got a warning, and quickly want to remedy it) if you have a settings set command for this in your lldbinit file, be sure to change "true" or "false" into an appropriate "yes" or "no" value llvm-svn: 182323
2013-05-21 06:29:23 +08:00
bool is_load_script = strcmp(property_path,"target.load-script-from-symbol-file") == 0;
TargetSP target_sp;
<rdar://problem/13878726> Yet another implementation of the python in dSYM autoload :) This time we are going with a ternary setting: true - load, do not warn false - do not load, do not warn warn - do not load, warn (default) llvm-svn: 182414
2013-05-22 04:13:34 +08:00
LoadScriptFromSymFile load_script_old_value;
<rdar://problem/13878726> This changes the setting target.load-script-from-symbol-file to be a ternary enum value: default (the default value) will NOT load the script files but will issue a warning suggesting workarounds yes will load the script files no will not load the script files AND will NOT issue any warning if you change the setting value from default to yes, that will then cause the script files to be loaded (the assumption is you didn't know about the setting, got a warning, and quickly want to remedy it) if you have a settings set command for this in your lldbinit file, be sure to change "true" or "false" into an appropriate "yes" or "no" value llvm-svn: 182323
2013-05-21 06:29:23 +08:00
if (is_load_script && exe_ctx->GetTargetSP())
{
target_sp = exe_ctx->GetTargetSP();
load_script_old_value = target_sp->TargetProperties::GetLoadScriptFromSymbolFile();
}
Made it so changes to the prompt via "settings set prompt" get noticed by the command line. Added the ability for OptionValueString objects to take flags. The only flag is currently for parsing escape sequences. Not the prompt string can have escape characters translate which will allow colors in the prompt. Added functions to Args that will parse the escape sequences in a string, and also re-encode the escape sequences for display. This was looted from other parts of LLDB (the Debugger::FormatString() function). llvm-svn: 163043
2012-09-01 08:38:36 +08:00
Error error (Properties::SetPropertyValue (exe_ctx, op, property_path, value));
if (error.Success())
{
<rdar://problem/13878726> This changes the setting target.load-script-from-symbol-file to be a ternary enum value: default (the default value) will NOT load the script files but will issue a warning suggesting workarounds yes will load the script files no will not load the script files AND will NOT issue any warning if you change the setting value from default to yes, that will then cause the script files to be loaded (the assumption is you didn't know about the setting, got a warning, and quickly want to remedy it) if you have a settings set command for this in your lldbinit file, be sure to change "true" or "false" into an appropriate "yes" or "no" value llvm-svn: 182323
2013-05-21 06:29:23 +08:00
// FIXME it would be nice to have "on-change" callbacks for properties
Made it so changes to the prompt via "settings set prompt" get noticed by the command line. Added the ability for OptionValueString objects to take flags. The only flag is currently for parsing escape sequences. Not the prompt string can have escape characters translate which will allow colors in the prompt. Added functions to Args that will parse the escape sequences in a string, and also re-encode the escape sequences for display. This was looted from other parts of LLDB (the Debugger::FormatString() function). llvm-svn: 163043
2012-09-01 08:38:36 +08:00
if (strcmp(property_path, g_properties[ePropertyPrompt].name) == 0)
{
const char *new_prompt = GetPrompt();
Add ${ansi.XX} parsing to lldb prompt, use-color setting, and -no-use-colors command line options. settings set use-color [false|true] settings set prompt "${ansi.bold}${ansi.fg.green}(lldb)${ansi.normal} " also "--no-use-colors" on the command prompt llvm-svn: 182609
2013-05-24 04:47:45 +08:00
std::string str = lldb_utility::ansi::FormatAnsiTerminalCodes (new_prompt, GetUseColor());
if (str.length())
new_prompt = str.c_str();
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
GetCommandInterpreter().UpdatePrompt(new_prompt);
Made it so changes to the prompt via "settings set prompt" get noticed by the command line. Added the ability for OptionValueString objects to take flags. The only flag is currently for parsing escape sequences. Not the prompt string can have escape characters translate which will allow colors in the prompt. Added functions to Args that will parse the escape sequences in a string, and also re-encode the escape sequences for display. This was looted from other parts of LLDB (the Debugger::FormatString() function). llvm-svn: 163043
2012-09-01 08:38:36 +08:00
EventSP prompt_change_event_sp (new Event(CommandInterpreter::eBroadcastBitResetPrompt, new EventDataBytes (new_prompt)));
GetCommandInterpreter().BroadcastEvent (prompt_change_event_sp);
}
Add ${ansi.XX} parsing to lldb prompt, use-color setting, and -no-use-colors command line options. settings set use-color [false|true] settings set prompt "${ansi.bold}${ansi.fg.green}(lldb)${ansi.normal} " also "--no-use-colors" on the command prompt llvm-svn: 182609
2013-05-24 04:47:45 +08:00
else if (strcmp(property_path, g_properties[ePropertyUseColor].name) == 0)
{
// use-color changed. Ping the prompt so it can reset the ansi terminal codes.
SetPrompt (GetPrompt());
}
<rdar://problem/13878726> Yet another implementation of the python in dSYM autoload :) This time we are going with a ternary setting: true - load, do not warn false - do not load, do not warn warn - do not load, warn (default) llvm-svn: 182414
2013-05-22 04:13:34 +08:00
else if (is_load_script && target_sp && load_script_old_value == eLoadScriptFromSymFileWarn)
<rdar://problem/13878726> This changes the setting target.load-script-from-symbol-file to be a ternary enum value: default (the default value) will NOT load the script files but will issue a warning suggesting workarounds yes will load the script files no will not load the script files AND will NOT issue any warning if you change the setting value from default to yes, that will then cause the script files to be loaded (the assumption is you didn't know about the setting, got a warning, and quickly want to remedy it) if you have a settings set command for this in your lldbinit file, be sure to change "true" or "false" into an appropriate "yes" or "no" value llvm-svn: 182323
2013-05-21 06:29:23 +08:00
{
<rdar://problem/13878726> Yet another implementation of the python in dSYM autoload :) This time we are going with a ternary setting: true - load, do not warn false - do not load, do not warn warn - do not load, warn (default) llvm-svn: 182414
2013-05-22 04:13:34 +08:00
if (target_sp->TargetProperties::GetLoadScriptFromSymbolFile() == eLoadScriptFromSymFileTrue)
<rdar://problem/13878726> This changes the setting target.load-script-from-symbol-file to be a ternary enum value: default (the default value) will NOT load the script files but will issue a warning suggesting workarounds yes will load the script files no will not load the script files AND will NOT issue any warning if you change the setting value from default to yes, that will then cause the script files to be loaded (the assumption is you didn't know about the setting, got a warning, and quickly want to remedy it) if you have a settings set command for this in your lldbinit file, be sure to change "true" or "false" into an appropriate "yes" or "no" value llvm-svn: 182323
2013-05-21 06:29:23 +08:00
{
std::list<Error> errors;
Improving the previous checkin about target.load-script-from-symbol-file There are two settings: target.load-script-from-symbol-file is a boolean that says load or no load (default: false) target.warn-on-script-from-symbol-file is also a boolean, it says whether you want to be warned when a script file is not loaded due to security (default: true) the auto loading on change for target.load-script-from-symbol-file is preserved llvm-svn: 182336
2013-05-21 08:00:30 +08:00
StreamString feedback_stream;
if (!target_sp->LoadScriptingResources(errors,&feedback_stream))
<rdar://problem/13878726> This changes the setting target.load-script-from-symbol-file to be a ternary enum value: default (the default value) will NOT load the script files but will issue a warning suggesting workarounds yes will load the script files no will not load the script files AND will NOT issue any warning if you change the setting value from default to yes, that will then cause the script files to be loaded (the assumption is you didn't know about the setting, got a warning, and quickly want to remedy it) if you have a settings set command for this in your lldbinit file, be sure to change "true" or "false" into an appropriate "yes" or "no" value llvm-svn: 182323
2013-05-21 06:29:23 +08:00
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
StreamFileSP stream_sp (GetErrorFile());
if (stream_sp)
<rdar://problem/13878726> This changes the setting target.load-script-from-symbol-file to be a ternary enum value: default (the default value) will NOT load the script files but will issue a warning suggesting workarounds yes will load the script files no will not load the script files AND will NOT issue any warning if you change the setting value from default to yes, that will then cause the script files to be loaded (the assumption is you didn't know about the setting, got a warning, and quickly want to remedy it) if you have a settings set command for this in your lldbinit file, be sure to change "true" or "false" into an appropriate "yes" or "no" value llvm-svn: 182323
2013-05-21 06:29:23 +08:00
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
for (auto error : errors)
{
stream_sp->Printf("%s\n",error.AsCString());
}
if (feedback_stream.GetSize())
stream_sp->Printf("%s",feedback_stream.GetData());
<rdar://problem/13878726> This changes the setting target.load-script-from-symbol-file to be a ternary enum value: default (the default value) will NOT load the script files but will issue a warning suggesting workarounds yes will load the script files no will not load the script files AND will NOT issue any warning if you change the setting value from default to yes, that will then cause the script files to be loaded (the assumption is you didn't know about the setting, got a warning, and quickly want to remedy it) if you have a settings set command for this in your lldbinit file, be sure to change "true" or "false" into an appropriate "yes" or "no" value llvm-svn: 182323
2013-05-21 06:29:23 +08:00
}
}
}
}
Made it so changes to the prompt via "settings set prompt" get noticed by the command line. Added the ability for OptionValueString objects to take flags. The only flag is currently for parsing escape sequences. Not the prompt string can have escape characters translate which will allow colors in the prompt. Added functions to Args that will parse the escape sequences in a string, and also re-encode the escape sequences for display. This was looted from other parts of LLDB (the Debugger::FormatString() function). llvm-svn: 163043
2012-09-01 08:38:36 +08:00
}
return error;
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
bool
Debugger::GetAutoConfirm () const
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const uint32_t idx = ePropertyAutoConfirm;
<rdar://problem/12022079> Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to: (lldb) b main Breakpoint created: 1: name = 'main', locations = 1 Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to: (lldb) settings set interpreter.expand-regex-aliases true (lldb) b main breakpoint set --name 'main' Breakpoint created: 1: name = 'main', locations = 1 Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean). Fixed auto completion for settings names when nothing has been type (it should show all settings). llvm-svn: 162418
2012-08-23 08:22:02 +08:00
return m_collection_sp->GetPropertyAtIndexAsBoolean (NULL, idx, g_properties[idx].default_uint_value != 0);
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
}
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
const char *
Debugger::GetDisassemblyFormat() const
{
const uint32_t idx = ePropertyDisassemblyFormat;
return m_collection_sp->GetPropertyAtIndexAsString (NULL, idx, g_properties[idx].default_cstr_value);
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const char *
Debugger::GetFrameFormat() const
LLDB no longer prints <no result> by default if the expression returns nothing. There is now a setting, "notify-void." When the user enables that setting, lldb prints (void) if an expression's result is void. Otherwise, lldb is silent. <rdar://problem/11225150> llvm-svn: 161600
2012-08-10 02:18:47 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const uint32_t idx = ePropertyFrameFormat;
<rdar://problem/12022079> Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to: (lldb) b main Breakpoint created: 1: name = 'main', locations = 1 Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to: (lldb) settings set interpreter.expand-regex-aliases true (lldb) b main breakpoint set --name 'main' Breakpoint created: 1: name = 'main', locations = 1 Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean). Fixed auto completion for settings names when nothing has been type (it should show all settings). llvm-svn: 162418
2012-08-23 08:22:02 +08:00
return m_collection_sp->GetPropertyAtIndexAsString (NULL, idx, g_properties[idx].default_cstr_value);
LLDB no longer prints <no result> by default if the expression returns nothing. There is now a setting, "notify-void." When the user enables that setting, lldb prints (void) if an expression's result is void. Otherwise, lldb is silent. <rdar://problem/11225150> llvm-svn: 161600
2012-08-10 02:18:47 +08:00
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
bool
Debugger::GetNotifyVoid () const
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const uint32_t idx = ePropertyNotiftVoid;
<rdar://problem/12022079> Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to: (lldb) b main Breakpoint created: 1: name = 'main', locations = 1 Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to: (lldb) settings set interpreter.expand-regex-aliases true (lldb) b main breakpoint set --name 'main' Breakpoint created: 1: name = 'main', locations = 1 Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean). Fixed auto completion for settings names when nothing has been type (it should show all settings). llvm-svn: 162418
2012-08-23 08:22:02 +08:00
return m_collection_sp->GetPropertyAtIndexAsBoolean (NULL, idx, g_properties[idx].default_uint_value != 0);
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const char *
Debugger::GetPrompt() const
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const uint32_t idx = ePropertyPrompt;
<rdar://problem/12022079> Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to: (lldb) b main Breakpoint created: 1: name = 'main', locations = 1 Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to: (lldb) settings set interpreter.expand-regex-aliases true (lldb) b main breakpoint set --name 'main' Breakpoint created: 1: name = 'main', locations = 1 Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean). Fixed auto completion for settings names when nothing has been type (it should show all settings). llvm-svn: 162418
2012-08-23 08:22:02 +08:00
return m_collection_sp->GetPropertyAtIndexAsString (NULL, idx, g_properties[idx].default_cstr_value);
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
void
Debugger::SetPrompt(const char *p)
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const uint32_t idx = ePropertyPrompt;
m_collection_sp->SetPropertyAtIndexAsString (NULL, idx, p);
const char *new_prompt = GetPrompt();
Add ${ansi.XX} parsing to lldb prompt, use-color setting, and -no-use-colors command line options. settings set use-color [false|true] settings set prompt "${ansi.bold}${ansi.fg.green}(lldb)${ansi.normal} " also "--no-use-colors" on the command prompt llvm-svn: 182609
2013-05-24 04:47:45 +08:00
std::string str = lldb_utility::ansi::FormatAnsiTerminalCodes (new_prompt, GetUseColor());
if (str.length())
new_prompt = str.c_str();
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
GetCommandInterpreter().UpdatePrompt(new_prompt);
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const char *
Debugger::GetThreadFormat() const
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const uint32_t idx = ePropertyThreadFormat;
<rdar://problem/12022079> Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to: (lldb) b main Breakpoint created: 1: name = 'main', locations = 1 Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to: (lldb) settings set interpreter.expand-regex-aliases true (lldb) b main breakpoint set --name 'main' Breakpoint created: 1: name = 'main', locations = 1 Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean). Fixed auto completion for settings names when nothing has been type (it should show all settings). llvm-svn: 162418
2012-08-23 08:22:02 +08:00
return m_collection_sp->GetPropertyAtIndexAsString (NULL, idx, g_properties[idx].default_cstr_value);
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
lldb::ScriptLanguage
Debugger::GetScriptLanguage() const
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const uint32_t idx = ePropertyScriptLanguage;
<rdar://problem/12022079> Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to: (lldb) b main Breakpoint created: 1: name = 'main', locations = 1 Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to: (lldb) settings set interpreter.expand-regex-aliases true (lldb) b main breakpoint set --name 'main' Breakpoint created: 1: name = 'main', locations = 1 Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean). Fixed auto completion for settings names when nothing has been type (it should show all settings). llvm-svn: 162418
2012-08-23 08:22:02 +08:00
return (lldb::ScriptLanguage)m_collection_sp->GetPropertyAtIndexAsEnumeration (NULL, idx, g_properties[idx].default_uint_value);
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
bool
Debugger::SetScriptLanguage (lldb::ScriptLanguage script_lang)
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const uint32_t idx = ePropertyScriptLanguage;
return m_collection_sp->SetPropertyAtIndexAsEnumeration (NULL, idx, script_lang);
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
uint32_t
Debugger::GetTerminalWidth () const
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const uint32_t idx = ePropertyTerminalWidth;
<rdar://problem/12022079> Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to: (lldb) b main Breakpoint created: 1: name = 'main', locations = 1 Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to: (lldb) settings set interpreter.expand-regex-aliases true (lldb) b main breakpoint set --name 'main' Breakpoint created: 1: name = 'main', locations = 1 Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean). Fixed auto completion for settings names when nothing has been type (it should show all settings). llvm-svn: 162418
2012-08-23 08:22:02 +08:00
return m_collection_sp->GetPropertyAtIndexAsSInt64 (NULL, idx, g_properties[idx].default_uint_value);
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
bool
Debugger::SetTerminalWidth (uint32_t term_width)
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const uint32_t idx = ePropertyTerminalWidth;
return m_collection_sp->SetPropertyAtIndexAsSInt64 (NULL, idx, term_width);
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
bool
Debugger::GetUseExternalEditor () const
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const uint32_t idx = ePropertyUseExternalEditor;
<rdar://problem/12022079> Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to: (lldb) b main Breakpoint created: 1: name = 'main', locations = 1 Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to: (lldb) settings set interpreter.expand-regex-aliases true (lldb) b main breakpoint set --name 'main' Breakpoint created: 1: name = 'main', locations = 1 Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean). Fixed auto completion for settings names when nothing has been type (it should show all settings). llvm-svn: 162418
2012-08-23 08:22:02 +08:00
return m_collection_sp->GetPropertyAtIndexAsBoolean (NULL, idx, g_properties[idx].default_uint_value != 0);
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
bool
Debugger::SetUseExternalEditor (bool b)
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const uint32_t idx = ePropertyUseExternalEditor;
return m_collection_sp->SetPropertyAtIndexAsBoolean (NULL, idx, b);
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
}
Add ${ansi.XX} parsing to lldb prompt, use-color setting, and -no-use-colors command line options. settings set use-color [false|true] settings set prompt "${ansi.bold}${ansi.fg.green}(lldb)${ansi.normal} " also "--no-use-colors" on the command prompt llvm-svn: 182609
2013-05-24 04:47:45 +08:00
bool
Debugger::GetUseColor () const
{
const uint32_t idx = ePropertyUseColor;
return m_collection_sp->GetPropertyAtIndexAsBoolean (NULL, idx, g_properties[idx].default_uint_value != 0);
}
bool
Debugger::SetUseColor (bool b)
{
const uint32_t idx = ePropertyUseColor;
bool ret = m_collection_sp->SetPropertyAtIndexAsBoolean (NULL, idx, b);
SetPrompt (GetPrompt());
return ret;
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
uint32_t
Debugger::GetStopSourceLineCount (bool before) const
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
const uint32_t idx = before ? ePropertyStopLineCountBefore : ePropertyStopLineCountAfter;
<rdar://problem/12022079> Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to: (lldb) b main Breakpoint created: 1: name = 'main', locations = 1 Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to: (lldb) settings set interpreter.expand-regex-aliases true (lldb) b main breakpoint set --name 'main' Breakpoint created: 1: name = 'main', locations = 1 Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean). Fixed auto completion for settings names when nothing has been type (it should show all settings). llvm-svn: 162418
2012-08-23 08:22:02 +08:00
return m_collection_sp->GetPropertyAtIndexAsSInt64 (NULL, idx, g_properties[idx].default_uint_value);
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
}
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
Debugger::StopDisassemblyType
Debugger::GetStopDisassemblyDisplay () const
{
const uint32_t idx = ePropertyStopDisassemblyDisplay;
<rdar://problem/12022079> Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to: (lldb) b main Breakpoint created: 1: name = 'main', locations = 1 Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to: (lldb) settings set interpreter.expand-regex-aliases true (lldb) b main breakpoint set --name 'main' Breakpoint created: 1: name = 'main', locations = 1 Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean). Fixed auto completion for settings names when nothing has been type (it should show all settings). llvm-svn: 162418
2012-08-23 08:22:02 +08:00
return (Debugger::StopDisassemblyType)m_collection_sp->GetPropertyAtIndexAsEnumeration (NULL, idx, g_properties[idx].default_uint_value);
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
}
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
uint32_t
Debugger::GetDisassemblyLineCount () const
{
const uint32_t idx = ePropertyStopDisassemblyCount;
<rdar://problem/12022079> Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to: (lldb) b main Breakpoint created: 1: name = 'main', locations = 1 Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to: (lldb) settings set interpreter.expand-regex-aliases true (lldb) b main breakpoint set --name 'main' Breakpoint created: 1: name = 'main', locations = 1 Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean). Fixed auto completion for settings names when nothing has been type (it should show all settings). llvm-svn: 162418
2012-08-23 08:22:02 +08:00
return m_collection_sp->GetPropertyAtIndexAsSInt64 (NULL, idx, g_properties[idx].default_uint_value);
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
}
Many GDB users always want to display disassembly when they stop by using something like "display/4i $pc" (or something like this). With LLDB we already were showing 3 lines of source before and 3 lines of source after the current source line when showing a stop context. We now improve this by allowing the user to control the number of lines with the new "stop-line-count-before" and "stop-line-count-after" settings. Also, there is a new setting for how many disassembly lines to show: "stop-disassembly-count". This will control how many source lines are shown when there is no source or when we have no source line info. settings set stop-line-count-before 3 settings set stop-line-count-after 3 settings set stop-disassembly-count 4 settings set stop-disassembly-display no-source The default values are set as shown above and allow 3 lines of source before and after (what we used to do) the current stop location, and will display 4 lines of disassembly if the source is not available or if we have no debug info. If both "stop-source-context-before" and "stop-source-context-after" are set to zero, this will disable showing any source when stopped. The "stop-disassembly-display" setting is an enumeration that allows you to control when to display disassembly. It has 3 possible values: "never" - never show disassembly no matter what "no-source" - only show disassembly when there is no source line info or the source files are missing "always" - always show disassembly. llvm-svn: 145050
2011-11-22 05:44:34 +08:00
<rdar://problem/15319880> Introduce a new boolean setting enable-auto-oneliner This setting if set to false will force LLDB to not use the new compact one-line display By default, one-line mode stays on, at least until we can be confident it works. But now if it seriously impedes your workflow while it evolves/it works wonders but you still hate it, there's a way to turn it off llvm-svn: 193450
2013-10-26 07:09:40 +08:00
bool
Renaming the setting to enable/disable automatic one-lining of summaries as auto-one-line-summaries llvm-svn: 193801
2013-11-01 05:01:07 +08:00
Debugger::GetAutoOneLineSummaries () const
<rdar://problem/15319880> Introduce a new boolean setting enable-auto-oneliner This setting if set to false will force LLDB to not use the new compact one-line display By default, one-line mode stays on, at least until we can be confident it works. But now if it seriously impedes your workflow while it evolves/it works wonders but you still hate it, there's a way to turn it off llvm-svn: 193450
2013-10-26 07:09:40 +08:00
{
Renaming the setting to enable/disable automatic one-lining of summaries as auto-one-line-summaries llvm-svn: 193801
2013-11-01 05:01:07 +08:00
const uint32_t idx = ePropertyAutoOneLineSummaries;
<rdar://problem/15319880> Introduce a new boolean setting enable-auto-oneliner This setting if set to false will force LLDB to not use the new compact one-line display By default, one-line mode stays on, at least until we can be confident it works. But now if it seriously impedes your workflow while it evolves/it works wonders but you still hate it, there's a way to turn it off llvm-svn: 193450
2013-10-26 07:09:40 +08:00
return m_collection_sp->GetPropertyAtIndexAsBoolean (NULL, idx, true);
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
#pragma mark Debugger
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
//const DebuggerPropertiesSP &
//Debugger::GetSettings() const
//{
// return m_properties_sp;
//}
//
Cleaned up code that wasn't using the Initialize and Terminate paradigm by changing it to use it. There was an extra parameter added to the static accessor global user settings controllers that wasn't needed. A bool was being used as a parameter to the accessor just so it could be used to clean up the global user settings controller which is now fixed by splitting up the initialization into the "static void Class::Initialize()", access into the "static UserSettingsControllerSP & Class::GetSettingsController()", and cleanup into "static void Class::Terminate()". Also added initialize and terminate calls to the logging code to avoid issues when LLDB is shutting down. There were cases after the logging was switched over to use shared pointers where we could crash if the global destructor chain was being run and it causes the log to be destroyed and any any logging occurred. llvm-svn: 119757
2010-11-19 07:32:35 +08:00
Split up the Python script interpreter code to allow multiple script interpreter objects to exist within the same process (one script interpreter object per debugger object). The python script interpreter objects are all using the same global Python script interpreter; they use separate dictionaries to keep their data separate, and mutex's to prevent any object attempting to use the global Python interpreter when another object is already using it. llvm-svn: 123415
2011-01-14 08:29:16 +08:00
int
Debugger::TestDebuggerRefCount ()
{
return g_shared_debugger_refcount;
}
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
void
Fixed internal code to not link against and code from "lldb/API/*". lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used. Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number. Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings. llvm-svn: 196141
2013-12-03 03:35:49 +08:00
Debugger::Initialize (LoadPluginCallbackType load_plugin_callback)
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
Fixed internal code to not link against and code from "lldb/API/*". lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used. Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number. Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings. llvm-svn: 196141
2013-12-03 03:35:49 +08:00
g_load_plugin_callback = load_plugin_callback;
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
if (g_shared_debugger_refcount++ == 0)
Fixed an issue where the UserSettingsControllers were being created out of order and this was causing the target, process and thread trees to not be available. llvm-svn: 119784
2010-11-19 11:46:01 +08:00
lldb_private::Initialize();
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
void
Debugger::Terminate ()
{
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
if (g_shared_debugger_refcount > 0)
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
g_shared_debugger_refcount--;
if (g_shared_debugger_refcount == 0)
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
Fixed an issue where the UserSettingsControllers were being created out of order and this was causing the target, process and thread trees to not be available. llvm-svn: 119784
2010-11-19 11:46:01 +08:00
lldb_private::WillTerminate();
lldb_private::Terminate();
Replace Mutex guarding python interpreter access with Predicate, allowing timeouts & informing the user when the lock is unavailable. Fixed problem where Debugger::Terminate was clearing the debugger list even when the global ref count was greater than zero. llvm-svn: 123674
2011-01-18 05:55:19 +08:00
// Clear our master list of debugger objects
Mutex::Locker locker (GetDebuggerListMutex ());
GetDebuggerList().clear();
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
}
}
The UserSettings controllers must be initialized & terminated in the correct order. Previously this was tacitly implemented but not enforced, so it was possible to accidentally do things in the wrong order and cause problems. This fixes that problem. llvm-svn: 127430
2011-03-11 06:14:10 +08:00
void
Debugger::SettingsInitialize ()
{
Remove further outdated "settings" code and also implement a few missing things. llvm-svn: 162376
2012-08-23 02:39:03 +08:00
Target::SettingsInitialize ();
The UserSettings controllers must be initialized & terminated in the correct order. Previously this was tacitly implemented but not enforced, so it was possible to accidentally do things in the wrong order and cause problems. This fixes that problem. llvm-svn: 127430
2011-03-11 06:14:10 +08:00
}
void
Debugger::SettingsTerminate ()
{
Remove further outdated "settings" code and also implement a few missing things. llvm-svn: 162376
2012-08-23 02:39:03 +08:00
Target::SettingsTerminate ();
The UserSettings controllers must be initialized & terminated in the correct order. Previously this was tacitly implemented but not enforced, so it was possible to accidentally do things in the wrong order and cause problems. This fixes that problem. llvm-svn: 127430
2011-03-11 06:14:10 +08:00
}
Implementing plugins that provide commands. This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin. Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands Caveats: Currently, the new API objects and features are not exposed via Python. The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object) There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own llvm-svn: 164865
2012-09-29 07:57:51 +08:00
bool
<rdar://problem/13209140> “plugin load” tries to be more helpful when it fails to load a plugin llvm-svn: 180218
2013-04-25 05:29:08 +08:00
Debugger::LoadPlugin (const FileSpec& spec, Error& error)
Implementing plugins that provide commands. This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin. Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands Caveats: Currently, the new API objects and features are not exposed via Python. The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object) There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own llvm-svn: 164865
2012-09-29 07:57:51 +08:00
{
Fixed internal code to not link against and code from "lldb/API/*". lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used. Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number. Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings. llvm-svn: 196141
2013-12-03 03:35:49 +08:00
if (g_load_plugin_callback)
<rdar://problem/13209140> “plugin load” tries to be more helpful when it fails to load a plugin llvm-svn: 180218
2013-04-25 05:29:08 +08:00
{
Update LLDB to use LLVM's DynamicLibrary. LLDB had implemented its own DynamicLibrary class for plugin support. LLVM has an equivalent mechanism, so this patch deletes the duplicated code in LLDB and updates LLDB to reference the mechanism provided by LLVM. llvm-svn: 216606
2014-08-28 04:15:09 +08:00
llvm::sys::DynamicLibrary dynlib = g_load_plugin_callback (shared_from_this(), spec, error);
if (dynlib.isValid())
Fixed internal code to not link against and code from "lldb/API/*". lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used. Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number. Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings. llvm-svn: 196141
2013-12-03 03:35:49 +08:00
{
Update LLDB to use LLVM's DynamicLibrary. LLDB had implemented its own DynamicLibrary class for plugin support. LLVM has an equivalent mechanism, so this patch deletes the duplicated code in LLDB and updates LLDB to reference the mechanism provided by LLVM. llvm-svn: 216606
2014-08-28 04:15:09 +08:00
m_loaded_plugins.push_back(dynlib);
Fixed internal code to not link against and code from "lldb/API/*". lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used. Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number. Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings. llvm-svn: 196141
2013-12-03 03:35:49 +08:00
return true;
}
<rdar://problem/13209140> “plugin load” tries to be more helpful when it fails to load a plugin llvm-svn: 180218
2013-04-25 05:29:08 +08:00
}
Fixed internal code to not link against and code from "lldb/API/*". lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used. Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number. Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings. llvm-svn: 196141
2013-12-03 03:35:49 +08:00
else
Implementing plugins that provide commands. This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin. Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands Caveats: Currently, the new API objects and features are not exposed via Python. The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object) There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own llvm-svn: 164865
2012-09-29 07:57:51 +08:00
{
Fixed internal code to not link against and code from "lldb/API/*". lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used. Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number. Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings. llvm-svn: 196141
2013-12-03 03:35:49 +08:00
// The g_load_plugin_callback is registered in SBDebugger::Initialize()
// and if the public API layer isn't available (code is linking against
// all of the internal LLDB static libraries), then we can't load plugins
error.SetErrorString("Public API layer is not available");
Implementing plugins that provide commands. This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin. Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands Caveats: Currently, the new API objects and features are not exposed via Python. The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object) There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own llvm-svn: 164865
2012-09-29 07:57:51 +08:00
}
return false;
}
static FileSpec::EnumerateDirectoryResult
LoadPluginCallback
(
void *baton,
FileSpec::FileType file_type,
const FileSpec &file_spec
)
{
Error error;
static ConstString g_dylibext("dylib");
simple plugin now works with Linux fix assert in SetPluginInfo implement Linux ePathTypeLLDBSystemPlugins and ePathTypeLLDBUserPlugins implement Linux Host::Backtrace and Host::GetEnvironment add .gnu_debugdata comment Differential Revision: http://llvm-reviews.chandlerc.com/D1159 llvm-svn: 186475
2013-07-17 08:26:30 +08:00
static ConstString g_solibext("so");
Implementing plugins that provide commands. This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin. Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands Caveats: Currently, the new API objects and features are not exposed via Python. The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object) There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own llvm-svn: 164865
2012-09-29 07:57:51 +08:00
if (!baton)
return FileSpec::eEnumerateDirectoryResultQuit;
Debugger *debugger = (Debugger*)baton;
// If we have a regular file, a symbolic link or unknown file type, try
// and process the file. We must handle unknown as sometimes the directory
// enumeration might be enumerating a file system that doesn't have correct
// file type information.
if (file_type == FileSpec::eFileTypeRegular ||
file_type == FileSpec::eFileTypeSymbolicLink ||
file_type == FileSpec::eFileTypeUnknown )
{
FileSpec plugin_file_spec (file_spec);
plugin_file_spec.ResolvePath ();
simple plugin now works with Linux fix assert in SetPluginInfo implement Linux ePathTypeLLDBSystemPlugins and ePathTypeLLDBUserPlugins implement Linux Host::Backtrace and Host::GetEnvironment add .gnu_debugdata comment Differential Revision: http://llvm-reviews.chandlerc.com/D1159 llvm-svn: 186475
2013-07-17 08:26:30 +08:00
if (plugin_file_spec.GetFileNameExtension() != g_dylibext &&
plugin_file_spec.GetFileNameExtension() != g_solibext)
{
Implementing plugins that provide commands. This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin. Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands Caveats: Currently, the new API objects and features are not exposed via Python. The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object) There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own llvm-svn: 164865
2012-09-29 07:57:51 +08:00
return FileSpec::eEnumerateDirectoryResultNext;
simple plugin now works with Linux fix assert in SetPluginInfo implement Linux ePathTypeLLDBSystemPlugins and ePathTypeLLDBUserPlugins implement Linux Host::Backtrace and Host::GetEnvironment add .gnu_debugdata comment Differential Revision: http://llvm-reviews.chandlerc.com/D1159 llvm-svn: 186475
2013-07-17 08:26:30 +08:00
}
Implementing plugins that provide commands. This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin. Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands Caveats: Currently, the new API objects and features are not exposed via Python. The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object) There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own llvm-svn: 164865
2012-09-29 07:57:51 +08:00
<rdar://problem/13209140> “plugin load” tries to be more helpful when it fails to load a plugin llvm-svn: 180218
2013-04-25 05:29:08 +08:00
Error plugin_load_error;
debugger->LoadPlugin (plugin_file_spec, plugin_load_error);
Implementing plugins that provide commands. This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin. Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands Caveats: Currently, the new API objects and features are not exposed via Python. The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object) There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own llvm-svn: 164865
2012-09-29 07:57:51 +08:00
return FileSpec::eEnumerateDirectoryResultNext;
}
else if (file_type == FileSpec::eFileTypeUnknown ||
file_type == FileSpec::eFileTypeDirectory ||
file_type == FileSpec::eFileTypeSymbolicLink )
{
// Try and recurse into anything that a directory or symbolic link.
// We must also do this for unknown as sometimes the directory enumeration
Fix a few typos. llvm-svn: 211851
2014-06-27 10:42:12 +08:00
// might be enumerating a file system that doesn't have correct file type
Implementing plugins that provide commands. This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin. Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands Caveats: Currently, the new API objects and features are not exposed via Python. The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object) There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own llvm-svn: 164865
2012-09-29 07:57:51 +08:00
// information.
return FileSpec::eEnumerateDirectoryResultEnter;
}
return FileSpec::eEnumerateDirectoryResultNext;
}
void
Debugger::InstanceInitialize ()
{
FileSpec dir_spec;
const bool find_directories = true;
const bool find_files = true;
const bool find_other = true;
char dir_path[PATH_MAX];
Move Host::GetLLDBPath to HostInfo. This continues the effort to get Host code moved over to HostInfo, and removes many more instances of preprocessor defines along the way. llvm-svn: 216195
2014-08-22 01:29:12 +08:00
if (HostInfo::GetLLDBPath(ePathTypeLLDBSystemPlugins, dir_spec))
Implementing plugins that provide commands. This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin. Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands Caveats: Currently, the new API objects and features are not exposed via Python. The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object) There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own llvm-svn: 164865
2012-09-29 07:57:51 +08:00
{
if (dir_spec.Exists() && dir_spec.GetPath(dir_path, sizeof(dir_path)))
{
FileSpec::EnumerateDirectory (dir_path,
find_directories,
find_files,
find_other,
LoadPluginCallback,
this);
}
}
Move Host::GetLLDBPath to HostInfo. This continues the effort to get Host code moved over to HostInfo, and removes many more instances of preprocessor defines along the way. llvm-svn: 216195
2014-08-22 01:29:12 +08:00
if (HostInfo::GetLLDBPath(ePathTypeLLDBUserPlugins, dir_spec))
Implementing plugins that provide commands. This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin. Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands Caveats: Currently, the new API objects and features are not exposed via Python. The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object) There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own llvm-svn: 164865
2012-09-29 07:57:51 +08:00
{
if (dir_spec.Exists() && dir_spec.GetPath(dir_path, sizeof(dir_path)))
{
FileSpec::EnumerateDirectory (dir_path,
find_directories,
find_files,
find_other,
LoadPluginCallback,
this);
}
}
Added the infrastructure necessary for plug-ins to be able to add their own settings instead of having settings added to existing ones. In particular "target.disable-kext-loading" was added to "target" where it should actually be specific to the the dynamic loader plugin. Now the plug-in manager has the ability to create settings at the root level starting with "plugin". Each plug-in type can add new sub dictionaries, and then each plug-in can register a setting dictionary under its own short name. For example the DynamicLoaderDarwinKernel plug-in now registers a setting dictionary at: plugin dynamic-loader macosx-kernel (bool) disable-kext-loading To settings can be set using: (lldb) settings set plugin.dynamic-loader.macosx-kernel.disable-kext-loading true I currently only hooked up the DynamicLoader plug-ins, but the code is very easy to duplicate when and if we need settings for other plug-ins. llvm-svn: 166294
2012-10-20 02:02:49 +08:00
PluginManager::DebuggerInitialize (*this);
Implementing plugins that provide commands. This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin. Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands Caveats: Currently, the new API objects and features are not exposed via Python. The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object) There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own llvm-svn: 164865
2012-09-29 07:57:51 +08:00
}
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
DebuggerSP
Add a logging mode that takes a callback and flush'es to that callback. Also add SB API's to set this callback, and to enable the log channels. llvm-svn: 151018
2012-02-21 10:23:08 +08:00
Debugger::CreateInstance (lldb::LogOutputCallback log_callback, void *baton)
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
{
Add a logging mode that takes a callback and flush'es to that callback. Also add SB API's to set this callback, and to enable the log channels. llvm-svn: 151018
2012-02-21 10:23:08 +08:00
DebuggerSP debugger_sp (new Debugger(log_callback, baton));
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
if (g_shared_debugger_refcount > 0)
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
{
Mutex::Locker locker (GetDebuggerListMutex ());
GetDebuggerList().push_back(debugger_sp);
}
Implementing plugins that provide commands. This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin. Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands Caveats: Currently, the new API objects and features are not exposed via Python. The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object) There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own llvm-svn: 164865
2012-09-29 07:57:51 +08:00
debugger_sp->InstanceInitialize ();
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
return debugger_sp;
}
Add API and implementation for SBDebugger::Destroy and Debugger::Destroy. llvm-svn: 124011
2011-01-22 09:02:07 +08:00
void
Adopt the intrusive pointers in: lldb_private::Breakpoint lldb_private::BreakpointLocations lldb_private::BreakpointSite lldb_private::Debugger lldb_private::StackFrame lldb_private::Thread lldb_private::Target llvm-svn: 139985
2011-09-17 16:33:22 +08:00
Debugger::Destroy (DebuggerSP &debugger_sp)
Add API and implementation for SBDebugger::Destroy and Debugger::Destroy. llvm-svn: 124011
2011-01-22 09:02:07 +08:00
{
if (debugger_sp.get() == NULL)
return;
Track whether a process was Launched or Attached to. If Attached, the detach when the debugger is destroyed, rather than killing the process. Also added a Debugger::Clear, which gets called in Debugger::Destroy to deal with all the targets in the Debugger. Also made the Driver's main loop call Destroy on the debugger, rather than just Destroying the currently selected Target's process. llvm-svn: 139853
2011-09-16 05:36:42 +08:00
debugger_sp->Clear();
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
if (g_shared_debugger_refcount > 0)
Add API and implementation for SBDebugger::Destroy and Debugger::Destroy. llvm-svn: 124011
2011-01-22 09:02:07 +08:00
{
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
Mutex::Locker locker (GetDebuggerListMutex ());
DebuggerList &debugger_list = GetDebuggerList ();
DebuggerList::iterator pos, end = debugger_list.end();
for (pos = debugger_list.begin (); pos != end; ++pos)
Add API and implementation for SBDebugger::Destroy and Debugger::Destroy. llvm-svn: 124011
2011-01-22 09:02:07 +08:00
{
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
if ((*pos).get() == debugger_sp.get())
{
debugger_list.erase (pos);
return;
}
Add API and implementation for SBDebugger::Destroy and Debugger::Destroy. llvm-svn: 124011
2011-01-22 09:02:07 +08:00
}
}
}
Adopt the intrusive pointers in: lldb_private::Breakpoint lldb_private::BreakpointLocations lldb_private::BreakpointSite lldb_private::Debugger lldb_private::StackFrame lldb_private::Thread lldb_private::Target llvm-svn: 139985
2011-09-17 16:33:22 +08:00
DebuggerSP
This is a very large commit that completely re-does the way lldb handles user settable internal variables (the equivalent of set/show variables in gdb). In addition to the basic infrastructure (most of which is defined in UserSettingsController.{h,cpp}, there are examples of two classes that have been set up to contain user settable variables (the Debugger and Process classes). The 'settings' command has been modified to be a command-subcommand structure, and the 'set', 'show' and 'append' commands have been moved into this sub-commabnd structure. The old StateVariable class has been completely replaced by this, and the state variable dictionary has been removed from the Command Interpreter. Places that formerly accessed the state variable mechanism have been modified to access the variables in this new structure instead (checking the term-width; getting/checking the prompt; etc.) Variables are attached to classes; there are two basic "flavors" of variables that can be set: "global" variables (static/class-wide), and "instance" variables (one per instance of the class). The whole thing has been set up so that any global or instance variable can be set at any time (e.g. on start up, in your .lldbinit file), whether or not any instances actually exist (there's a whole pending and default values mechanism to help deal with that). llvm-svn: 113041
2010-09-04 08:03:46 +08:00
Debugger::FindDebuggerWithInstanceName (const ConstString &instance_name)
{
Adopt the intrusive pointers in: lldb_private::Breakpoint lldb_private::BreakpointLocations lldb_private::BreakpointSite lldb_private::Debugger lldb_private::StackFrame lldb_private::Thread lldb_private::Target llvm-svn: 139985
2011-09-17 16:33:22 +08:00
DebuggerSP debugger_sp;
Remove further outdated "settings" code and also implement a few missing things. llvm-svn: 162376
2012-08-23 02:39:03 +08:00
if (g_shared_debugger_refcount > 0)
{
Mutex::Locker locker (GetDebuggerListMutex ());
DebuggerList &debugger_list = GetDebuggerList();
DebuggerList::iterator pos, end = debugger_list.end();
for (pos = debugger_list.begin(); pos != end; ++pos)
{
if ((*pos).get()->m_instance_name == instance_name)
{
debugger_sp = *pos;
break;
}
}
}
This is a very large commit that completely re-does the way lldb handles user settable internal variables (the equivalent of set/show variables in gdb). In addition to the basic infrastructure (most of which is defined in UserSettingsController.{h,cpp}, there are examples of two classes that have been set up to contain user settable variables (the Debugger and Process classes). The 'settings' command has been modified to be a command-subcommand structure, and the 'set', 'show' and 'append' commands have been moved into this sub-commabnd structure. The old StateVariable class has been completely replaced by this, and the state variable dictionary has been removed from the Command Interpreter. Places that formerly accessed the state variable mechanism have been modified to access the variables in this new structure instead (checking the term-width; getting/checking the prompt; etc.) Variables are attached to classes; there are two basic "flavors" of variables that can be set: "global" variables (static/class-wide), and "instance" variables (one per instance of the class). The whole thing has been set up so that any global or instance variable can be set at any time (e.g. on start up, in your .lldbinit file), whether or not any instances actually exist (there's a whole pending and default values mechanism to help deal with that). llvm-svn: 113041
2010-09-04 08:03:46 +08:00
return debugger_sp;
}
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
TargetSP
Debugger::FindTargetWithProcessID (lldb::pid_t pid)
{
Adopt the intrusive pointers in: lldb_private::Breakpoint lldb_private::BreakpointLocations lldb_private::BreakpointSite lldb_private::Debugger lldb_private::StackFrame lldb_private::Thread lldb_private::Target llvm-svn: 139985
2011-09-17 16:33:22 +08:00
TargetSP target_sp;
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
if (g_shared_debugger_refcount > 0)
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
{
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
Mutex::Locker locker (GetDebuggerListMutex ());
DebuggerList &debugger_list = GetDebuggerList();
DebuggerList::iterator pos, end = debugger_list.end();
for (pos = debugger_list.begin(); pos != end; ++pos)
{
target_sp = (*pos)->GetTargetList().FindTargetWithProcessID (pid);
if (target_sp)
break;
}
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
}
return target_sp;
}
Made the darwin host layer properly reap any child processes that it spawns. After recent changes we weren't reaping child processes resulting in many zombie processes. This was fixed by adding more settings to the ProcessLaunchOptions class that allow clients to specify a callback function and baton to be notified when their process dies. If one is not supplied a default callback will be used that "does the right thing". Cleaned up a race condition in the ProcessGDBRemote class that would attempt to monitor when debugserver died. Added an extra boolean to the process monitor callbacks that indicate if a process exited or not. If your process exited with a zero exit status and no signal, both items could be zero. Modified the process monitor functions to not require a callback function in order to reap the child process. llvm-svn: 144780
2011-11-16 13:37:56 +08:00
TargetSP
Debugger::FindTargetWithProcess (Process *process)
{
TargetSP target_sp;
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
if (g_shared_debugger_refcount > 0)
Made the darwin host layer properly reap any child processes that it spawns. After recent changes we weren't reaping child processes resulting in many zombie processes. This was fixed by adding more settings to the ProcessLaunchOptions class that allow clients to specify a callback function and baton to be notified when their process dies. If one is not supplied a default callback will be used that "does the right thing". Cleaned up a race condition in the ProcessGDBRemote class that would attempt to monitor when debugserver died. Added an extra boolean to the process monitor callbacks that indicate if a process exited or not. If your process exited with a zero exit status and no signal, both items could be zero. Modified the process monitor functions to not require a callback function in order to reap the child process. llvm-svn: 144780
2011-11-16 13:37:56 +08:00
{
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
Mutex::Locker locker (GetDebuggerListMutex ());
DebuggerList &debugger_list = GetDebuggerList();
DebuggerList::iterator pos, end = debugger_list.end();
for (pos = debugger_list.begin(); pos != end; ++pos)
{
target_sp = (*pos)->GetTargetList().FindTargetWithProcess (process);
if (target_sp)
break;
}
Made the darwin host layer properly reap any child processes that it spawns. After recent changes we weren't reaping child processes resulting in many zombie processes. This was fixed by adding more settings to the ProcessLaunchOptions class that allow clients to specify a callback function and baton to be notified when their process dies. If one is not supplied a default callback will be used that "does the right thing". Cleaned up a race condition in the ProcessGDBRemote class that would attempt to monitor when debugserver died. Added an extra boolean to the process monitor callbacks that indicate if a process exited or not. If your process exited with a zero exit status and no signal, both items could be zero. Modified the process monitor functions to not require a callback function in order to reap the child process. llvm-svn: 144780
2011-11-16 13:37:56 +08:00
}
return target_sp;
}
Fix the ctor ivar initialization formatting for Debugger, TypeValidatorImpl, FileAction, and ProcessLaunchInfo to match the lldb coding convention. llvm-svn: 217653
2014-09-12 09:50:46 +08:00
Debugger::Debugger(lldb::LogOutputCallback log_callback, void *baton) :
UserID(g_unique_id++),
Properties(OptionValuePropertiesSP(new OptionValueProperties())),
m_input_file_sp(new StreamFile(stdin, false)),
m_output_file_sp(new StreamFile(stdout, false)),
m_error_file_sp(new StreamFile(stderr, false)),
m_terminal_state(),
m_target_list(*this),
m_platform_list(),
m_listener("lldb.Debugger"),
m_source_manager_ap(),
m_source_file_cache(),
m_command_interpreter_ap(new CommandInterpreter(*this, eScriptLanguageDefault, false)),
m_input_reader_stack(),
m_instance_name(),
m_loaded_plugins()
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
char instance_cstr[256];
snprintf(instance_cstr, sizeof(instance_cstr), "debugger_%d", (int)GetID());
m_instance_name.SetCString(instance_cstr);
Add a logging mode that takes a callback and flush'es to that callback. Also add SB API's to set this callback, and to enable the log channels. llvm-svn: 151018
2012-02-21 10:23:08 +08:00
if (log_callback)
m_log_callback_stream_sp.reset (new StreamCallback (log_callback, baton));
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
m_command_interpreter_ap->Initialize ();
Added more platform support. There are now some new commands: platform status -- gets status information for the selected platform platform create <platform-name> -- creates a new instance of a remote platform platform list -- list all available platforms platform select -- select a platform instance as the current platform (not working yet) When using "platform create" it will create a remote platform and make it the selected platform. For instances for iPhone OS debugging on Mac OS X one can do: (lldb) platform create remote-ios --sdk-version=4.0 Remote platform: iOS platform SDK version: 4.0 SDK path: "/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0" Not connected to a remote device. (lldb) file ~/Documents/a.out Current executable set to '~/Documents/a.out' (armv6). (lldb) image list [ 0] /Volumes/work/gclayton/Documents/devb/attach/a.out [ 1] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/dyld [ 2] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/libSystem.B.dylib Note that this is all happening prior to running _or_ connecting to a remote platform. Once connected to a remote platform the OS version might change which means we will need to update our dependecies. Also once we run, we will need to match up the actualy binaries with the actualy UUID's to files in the SDK, or download and cache them locally. This is just the start of the remote platforms, but this modification is the first iteration in getting the platforms really doing something. llvm-svn: 127934
2011-03-19 09:12:21 +08:00
// Always add our default platform to the platform list
Test suite runs better again after recent fixes that would select a platform if a "file a.out" auto selected a different platform than the selected one. Changes include: - fix it so you can select the "host" platform using "platform select host" - change all callbacks that create platforms to returns shared pointers - fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host" - Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform - cache platforms that are created and re-use them instead of always creating a new one llvm-svn: 218145
2014-09-20 04:11:50 +08:00
PlatformSP default_platform_sp (Platform::GetHostPlatform());
Added more platform support. There are now some new commands: platform status -- gets status information for the selected platform platform create <platform-name> -- creates a new instance of a remote platform platform list -- list all available platforms platform select -- select a platform instance as the current platform (not working yet) When using "platform create" it will create a remote platform and make it the selected platform. For instances for iPhone OS debugging on Mac OS X one can do: (lldb) platform create remote-ios --sdk-version=4.0 Remote platform: iOS platform SDK version: 4.0 SDK path: "/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0" Not connected to a remote device. (lldb) file ~/Documents/a.out Current executable set to '~/Documents/a.out' (armv6). (lldb) image list [ 0] /Volumes/work/gclayton/Documents/devb/attach/a.out [ 1] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/dyld [ 2] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/libSystem.B.dylib Note that this is all happening prior to running _or_ connecting to a remote platform. Once connected to a remote platform the OS version might change which means we will need to update our dependecies. Also once we run, we will need to match up the actualy binaries with the actualy UUID's to files in the SDK, or download and cache them locally. This is just the start of the remote platforms, but this modification is the first iteration in getting the platforms really doing something. llvm-svn: 127934
2011-03-19 09:12:21 +08:00
assert (default_platform_sp.get());
m_platform_list.Append (default_platform_sp, true);
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
<rdar://problem/12022079> Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to: (lldb) b main Breakpoint created: 1: name = 'main', locations = 1 Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to: (lldb) settings set interpreter.expand-regex-aliases true (lldb) b main breakpoint set --name 'main' Breakpoint created: 1: name = 'main', locations = 1 Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean). Fixed auto completion for settings names when nothing has been type (it should show all settings). llvm-svn: 162418
2012-08-23 08:22:02 +08:00
m_collection_sp->Initialize (g_properties);
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
m_collection_sp->AppendProperty (ConstString("target"),
ConstString("Settings specify to debugging targets."),
true,
Target::GetGlobalProperties()->GetValueProperties());
<rdar://problem/12022079> Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to: (lldb) b main Breakpoint created: 1: name = 'main', locations = 1 Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to: (lldb) settings set interpreter.expand-regex-aliases true (lldb) b main breakpoint set --name 'main' Breakpoint created: 1: name = 'main', locations = 1 Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean). Fixed auto completion for settings names when nothing has been type (it should show all settings). llvm-svn: 162418
2012-08-23 08:22:02 +08:00
if (m_command_interpreter_ap.get())
{
m_collection_sp->AppendProperty (ConstString("interpreter"),
ConstString("Settings specify to the debugger's command interpreter."),
true,
m_command_interpreter_ap->GetValueProperties());
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
OptionValueSInt64 *term_width = m_collection_sp->GetPropertyAtIndexAsOptionValueSInt64 (NULL, ePropertyTerminalWidth);
term_width->SetMinimumValue(10);
term_width->SetMaximumValue(1024);
Add ${ansi.XX} parsing to lldb prompt, use-color setting, and -no-use-colors command line options. settings set use-color [false|true] settings set prompt "${ansi.bold}${ansi.fg.green}(lldb)${ansi.normal} " also "--no-use-colors" on the command prompt llvm-svn: 182609
2013-05-24 04:47:45 +08:00
// Turn off use-color if this is a dumb terminal.
const char *term = getenv ("TERM");
if (term && !strcmp (term, "dumb"))
SetUseColor (false);
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
Debugger::~Debugger ()
Track whether a process was Launched or Attached to. If Attached, the detach when the debugger is destroyed, rather than killing the process. Also added a Debugger::Clear, which gets called in Debugger::Destroy to deal with all the targets in the Debugger. Also made the Driver's main loop call Destroy on the debugger, rather than just Destroying the currently selected Target's process. llvm-svn: 139853
2011-09-16 05:36:42 +08:00
{
Clear();
}
void
Debugger::Clear()
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
ClearIOHandlers();
StopIOHandlerThread();
StopEventHandlerThread();
Cleaned up the the code that figures out the inlined stack frames given a symbol context that represents an inlined function. This function has been renamed internally to: bool SymbolContext::GetParentOfInlinedScope (const Address &curr_frame_pc, SymbolContext &next_frame_sc, Address &next_frame_pc) const; And externally to: SBSymbolContext SBSymbolContext::GetParentOfInlinedScope (const SBAddress &curr_frame_pc, SBAddress &parent_frame_addr) const; The correct blocks are now correctly calculated. Switched the stack backtracing engine (in StackFrameList) and the address context printing over to using the internal SymbolContext::GetParentOfInlinedScope(...) so all inlined callstacks will match exactly. llvm-svn: 140910
2011-10-01 08:45:15 +08:00
m_listener.Clear();
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
int num_targets = m_target_list.GetNumTargets();
for (int i = 0; i < num_targets; i++)
{
<rdar://problem/10684141> When the lldb_private::Debugger goes away, it should cleanup all of its targets. llvm-svn: 148189
2012-01-15 01:04:19 +08:00
TargetSP target_sp (m_target_list.GetTargetAtIndex (i));
if (target_sp)
Track whether a process was Launched or Attached to. If Attached, the detach when the debugger is destroyed, rather than killing the process. Also added a Debugger::Clear, which gets called in Debugger::Destroy to deal with all the targets in the Debugger. Also made the Driver's main loop call Destroy on the debugger, rather than just Destroying the currently selected Target's process. llvm-svn: 139853
2011-09-16 05:36:42 +08:00
{
<rdar://problem/10684141> When the lldb_private::Debugger goes away, it should cleanup all of its targets. llvm-svn: 148189
2012-01-15 01:04:19 +08:00
ProcessSP process_sp (target_sp->GetProcessSP());
if (process_sp)
Call Process::Finalize directly in Debugger::Destroy, rather than having it done in the Process destructor. Doing it there can be too late depending on what the internal state and ProcessGDBRemote Async threads are doing. <rdar://problem/13297536> llvm-svn: 176203
2013-02-28 03:13:05 +08:00
process_sp->Finalize();
<rdar://problem/10684141> When the lldb_private::Debugger goes away, it should cleanup all of its targets. llvm-svn: 148189
2012-01-15 01:04:19 +08:00
target_sp->Destroy();
Track whether a process was Launched or Attached to. If Attached, the detach when the debugger is destroyed, rather than killing the process. Also added a Debugger::Clear, which gets called in Debugger::Destroy to deal with all the targets in the Debugger. Also made the Driver's main loop call Destroy on the debugger, rather than just Destroying the currently selected Target's process. llvm-svn: 139853
2011-09-16 05:36:42 +08:00
}
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
}
Add a general mechanism to wait on the debugger for Broadcasters of a given class/event bit set. Use this to allow the lldb Driver to emit notifications for breakpoint modifications. <rdar://problem/10619974> llvm-svn: 150665
2012-02-16 14:50:00 +08:00
BroadcasterManager::Clear ();
<rdar://problem/11246147> Make sure our debugger STDIN read thread shuts down quickly when we are done with it. We had a case where the owner of the file handle was not closing it and caused spins. llvm-svn: 156879
2012-05-16 08:11:54 +08:00
// Close the input file _before_ we close the input read communications class
// as it does NOT own the input file, our m_input_file does.
Save and restore terminal state when lldb is suspended with SIGTSTP and resumed with SIGCONT. Readline & gdb have a bunch of code to handle older UNIX'es with other job control mechanisms. I didn't try to replicate that. llvm-svn: 169032
2012-12-01 04:23:19 +08:00
m_terminal_state.Clear();
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
if (m_input_file_sp)
m_input_file_sp->GetFile().Close ();
Make sure that the CommandInterpreter::m_command_io_handler_sp gets reset when we quit. Currently if you run _any_ python, python has the "lldb.debugger" global variable and it has a strong reference to a lldb_private::Debugger since it is a lldb::SBDebugger object with a shared pointer. This makes sure that your LLDB command interpreter history is saved each time you quit command line LLDB. llvm-svn: 207164
2014-04-25 08:35:14 +08:00
m_command_interpreter_ap->Clear();
Track whether a process was Launched or Attached to. If Attached, the detach when the debugger is destroyed, rather than killing the process. Also added a Debugger::Clear, which gets called in Debugger::Destroy to deal with all the targets in the Debugger. Also made the Driver's main loop call Destroy on the debugger, rather than just Destroying the currently selected Target's process. llvm-svn: 139853
2011-09-16 05:36:42 +08:00
}
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
Don't have the debugger default to ignoring EOF. This is only what the driver (or anything running in a terminal) wants. Not what a UI (Xcode) would want where it creates a debugger per debug window. The current code had an infinite loop after a debug session ended. llvm-svn: 132280
2011-05-29 12:06:55 +08:00
bool
Debugger::GetCloseInputOnEOF () const
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
// return m_input_comm.GetCloseOnEOF();
return false;
Don't have the debugger default to ignoring EOF. This is only what the driver (or anything running in a terminal) wants. Not what a UI (Xcode) would want where it creates a debugger per debug window. The current code had an infinite loop after a debug session ended. llvm-svn: 132280
2011-05-29 12:06:55 +08:00
}
void
Debugger::SetCloseInputOnEOF (bool b)
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
// m_input_comm.SetCloseOnEOF(b);
Don't have the debugger default to ignoring EOF. This is only what the driver (or anything running in a terminal) wants. Not what a UI (Xcode) would want where it creates a debugger per debug window. The current code had an infinite loop after a debug session ended. llvm-svn: 132280
2011-05-29 12:06:55 +08:00
}
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
bool
Debugger::GetAsyncExecution ()
{
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
return !m_command_interpreter_ap->GetSynchronous();
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
void
Debugger::SetAsyncExecution (bool async_execution)
{
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
m_command_interpreter_ap->SetSynchronous (!async_execution);
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
void
Debugger::SetInputFileHandle (FILE *fh, bool tranfer_ownership)
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
if (m_input_file_sp)
m_input_file_sp->GetFile().SetStream (fh, tranfer_ownership);
else
m_input_file_sp.reset (new StreamFile (fh, tranfer_ownership));
File &in_file = m_input_file_sp->GetFile();
Use Host::File in lldb_private::StreamFile and other places to cleanup host layer a bit more. llvm-svn: 125149
2011-02-09 09:08:52 +08:00
if (in_file.IsValid() == false)
in_file.SetStream (stdin, true);
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
Save and restore terminal state when lldb is suspended with SIGTSTP and resumed with SIGCONT. Readline & gdb have a bunch of code to handle older UNIX'es with other job control mechanisms. I didn't try to replicate that. llvm-svn: 169032
2012-12-01 04:23:19 +08:00
// Save away the terminal state if that is relevant, so that we can restore it in RestoreInputState.
SaveInputTerminalState ();
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
void
Debugger::SetOutputFileHandle (FILE *fh, bool tranfer_ownership)
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
if (m_output_file_sp)
m_output_file_sp->GetFile().SetStream (fh, tranfer_ownership);
else
m_output_file_sp.reset (new StreamFile (fh, tranfer_ownership));
File &out_file = m_output_file_sp->GetFile();
Use Host::File in lldb_private::StreamFile and other places to cleanup host layer a bit more. llvm-svn: 125149
2011-02-09 09:08:52 +08:00
if (out_file.IsValid() == false)
out_file.SetStream (stdout, false);
Split up the Python script interpreter code to allow multiple script interpreter objects to exist within the same process (one script interpreter object per debugger object). The python script interpreter objects are all using the same global Python script interpreter; they use separate dictionaries to keep their data separate, and mutex's to prevent any object attempting to use the global Python interpreter when another object is already using it. llvm-svn: 123415
2011-01-14 08:29:16 +08:00
<rdar://problem/11449953> Change Debugger::SetOutputFileHandle() so that it does not automatically initialize the script interpreter in order to transfer its output file handle to it This should delay initialization of Python until strictly necessary and speed-up debugger startup Also, convert formatters for SEL and BOOL ObjC data-types from Python to C++, in order to reap more performance benefits from the above changes llvm-svn: 166967
2012-10-30 05:18:03 +08:00
// do not create the ScriptInterpreter just for setting the output file handle
// as the constructor will know how to do the right thing on its own
const bool can_create = false;
ScriptInterpreter* script_interpreter = GetCommandInterpreter().GetScriptInterpreter(can_create);
if (script_interpreter)
script_interpreter->ResetOutputFileHandle (fh);
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
void
Debugger::SetErrorFileHandle (FILE *fh, bool tranfer_ownership)
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
if (m_error_file_sp)
m_error_file_sp->GetFile().SetStream (fh, tranfer_ownership);
else
m_error_file_sp.reset (new StreamFile (fh, tranfer_ownership));
File &err_file = m_error_file_sp->GetFile();
Use Host::File in lldb_private::StreamFile and other places to cleanup host layer a bit more. llvm-svn: 125149
2011-02-09 09:08:52 +08:00
if (err_file.IsValid() == false)
err_file.SetStream (stderr, false);
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
Save and restore terminal state when lldb is suspended with SIGTSTP and resumed with SIGCONT. Readline & gdb have a bunch of code to handle older UNIX'es with other job control mechanisms. I didn't try to replicate that. llvm-svn: 169032
2012-12-01 04:23:19 +08:00
void
Debugger::SaveInputTerminalState ()
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
if (m_input_file_sp)
{
File &in_file = m_input_file_sp->GetFile();
if (in_file.GetDescriptor() != File::kInvalidDescriptor)
m_terminal_state.Save(in_file.GetDescriptor(), true);
}
Save and restore terminal state when lldb is suspended with SIGTSTP and resumed with SIGCONT. Readline & gdb have a bunch of code to handle older UNIX'es with other job control mechanisms. I didn't try to replicate that. llvm-svn: 169032
2012-12-01 04:23:19 +08:00
}
void
Debugger::RestoreInputTerminalState ()
{
m_terminal_state.Restore();
}
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
ExecutionContext
Change "Current" as in GetCurrentThread, GetCurrentStackFrame, etc, to "Selected" i.e. GetSelectedThread. Selected makes more sense, since these are set by some user action (a selection). I didn't change "CurrentProcess" since this is always controlled by the target, and a given target can only have one process, so it really can't be selected. llvm-svn: 112221
2010-08-27 05:32:51 +08:00
Debugger::GetSelectedExecutionContext ()
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
ExecutionContext exe_ctx;
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
TargetSP target_sp(GetSelectedTarget());
exe_ctx.SetTargetSP (target_sp);
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
if (target_sp)
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
ProcessSP process_sp (target_sp->GetProcessSP());
exe_ctx.SetProcessSP (process_sp);
if (process_sp && process_sp->IsRunning() == false)
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
ThreadSP thread_sp (process_sp->GetThreadList().GetSelectedThread());
if (thread_sp)
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
exe_ctx.SetThreadSP (thread_sp);
exe_ctx.SetFrameSP (thread_sp->GetSelectedFrame());
if (exe_ctx.GetFramePtr() == NULL)
exe_ctx.SetFrameSP (thread_sp->GetStackFrameAtIndex (0));
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
}
}
return exe_ctx;
}
Add the ability to catch and do the right thing with Interrupts (often control-c) and end-of-file (often control-d). llvm-svn: 119837
2010-11-20 04:47:54 +08:00
void
Debugger::DispatchInputInterrupt ()
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Mutex::Locker locker (m_input_reader_stack.GetMutex());
IOHandlerSP reader_sp (m_input_reader_stack.Top());
Add a new function to Debugger for finding the top/current input reader. Always make sure the input reader stack is not empty before trying to get the top element from the stack. llvm-svn: 125255
2011-02-10 09:15:13 +08:00
if (reader_sp)
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
reader_sp->Interrupt();
Add the ability to catch and do the right thing with Interrupts (often control-c) and end-of-file (often control-d). llvm-svn: 119837
2010-11-20 04:47:54 +08:00
}
void
Debugger::DispatchInputEndOfFile ()
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Mutex::Locker locker (m_input_reader_stack.GetMutex());
IOHandlerSP reader_sp (m_input_reader_stack.Top());
Add a new function to Debugger for finding the top/current input reader. Always make sure the input reader stack is not empty before trying to get the top element from the stack. llvm-svn: 125255
2011-02-10 09:15:13 +08:00
if (reader_sp)
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
reader_sp->GotEOF();
Add the ability to catch and do the right thing with Interrupts (often control-c) and end-of-file (often control-d). llvm-svn: 119837
2010-11-20 04:47:54 +08:00
}
Add code to make sure InputReaders finish and are cleaned up when a Debugger object is destroyed or re-set. (Thus making sure that, for example, the Python interpreter finishes and exits cleanly rather than being left in an undefined state.) llvm-svn: 122255
2010-12-21 02:35:50 +08:00
void
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Debugger::ClearIOHandlers ()
Add code to make sure InputReaders finish and are cleaned up when a Debugger object is destroyed or re-set. (Thus making sure that, for example, the Python interpreter finishes and exits cleanly rather than being left in an undefined state.) llvm-svn: 122255
2010-12-21 02:35:50 +08:00
{
Add a new function to Debugger for finding the top/current input reader. Always make sure the input reader stack is not empty before trying to get the top element from the stack. llvm-svn: 125255
2011-02-10 09:15:13 +08:00
// The bottom input reader should be the main debugger input reader. We do not want to close that one here.
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Mutex::Locker locker (m_input_reader_stack.GetMutex());
Create new class, InputReaderStack, to better handle mutexes around input readers and prevent deadlocking; modify Debugger to use the new class. llvm-svn: 132475
2011-06-03 03:18:55 +08:00
while (m_input_reader_stack.GetSize() > 1)
Add code to make sure InputReaders finish and are cleaned up when a Debugger object is destroyed or re-set. (Thus making sure that, for example, the Python interpreter finishes and exits cleanly rather than being left in an undefined state.) llvm-svn: 122255
2010-12-21 02:35:50 +08:00
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
IOHandlerSP reader_sp (m_input_reader_stack.Top());
Add code to make sure InputReaders finish and are cleaned up when a Debugger object is destroyed or re-set. (Thus making sure that, for example, the Python interpreter finishes and exits cleanly rather than being left in an undefined state.) llvm-svn: 122255
2010-12-21 02:35:50 +08:00
if (reader_sp)
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
m_input_reader_stack.Pop();
reader_sp->SetIsDone(true);
Fixed the command line LLDB so that "CTRL+C" will interrupt a running process again. llvm-svn: 202086
2014-02-25 06:50:57 +08:00
reader_sp->Cancel();
Add code to make sure InputReaders finish and are cleaned up when a Debugger object is destroyed or re-set. (Thus making sure that, for example, the Python interpreter finishes and exits cleanly rather than being left in an undefined state.) llvm-svn: 122255
2010-12-21 02:35:50 +08:00
}
}
}
This patch captures and serializes all output being written by the command line driver, including the lldb prompt being output by editline, the asynchronous process output & error messages, and asynchronous messages written by target stop-hooks. As part of this it introduces a new Stream class, StreamAsynchronousIO. A StreamAsynchronousIO object is created with a broadcaster, who will eventually broadcast the stream's data for a listener to handle, and an event type indicating what type of event the broadcaster will broadcast. When the Write method is called on a StreamAsynchronousIO object, the data is appended to an internal string. When the Flush method is called on a StreamAsynchronousIO object, it broadcasts it's data string and clears the string. Anything in lldb-core that needs to generate asynchronous output for the end-user should use the StreamAsynchronousIO objects. I have also added a new notification type for InputReaders, to let them know that a asynchronous output has been written. This is to allow the input readers to, for example, refresh their prompts and lines, if desired. I added the case statements to all the input readers to catch this notification, but I haven't added any code for handling them yet (except to the IOChannel input reader). llvm-svn: 130721
2011-05-03 04:41:46 +08:00
void
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Debugger::ExecuteIOHanders()
This patch captures and serializes all output being written by the command line driver, including the lldb prompt being output by editline, the asynchronous process output & error messages, and asynchronous messages written by target stop-hooks. As part of this it introduces a new Stream class, StreamAsynchronousIO. A StreamAsynchronousIO object is created with a broadcaster, who will eventually broadcast the stream's data for a listener to handle, and an event type indicating what type of event the broadcaster will broadcast. When the Write method is called on a StreamAsynchronousIO object, the data is appended to an internal string. When the Flush method is called on a StreamAsynchronousIO object, it broadcasts it's data string and clears the string. Anything in lldb-core that needs to generate asynchronous output for the end-user should use the StreamAsynchronousIO objects. I have also added a new notification type for InputReaders, to let them know that a asynchronous output has been written. This is to allow the input readers to, for example, refresh their prompts and lines, if desired. I added the case statements to all the input readers to catch this notification, but I haven't added any code for handling them yet (except to the IOChannel input reader). llvm-svn: 130721
2011-05-03 04:41:46 +08:00
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
while (1)
{
IOHandlerSP reader_sp(m_input_reader_stack.Top());
if (!reader_sp)
break;
This patch captures and serializes all output being written by the command line driver, including the lldb prompt being output by editline, the asynchronous process output & error messages, and asynchronous messages written by target stop-hooks. As part of this it introduces a new Stream class, StreamAsynchronousIO. A StreamAsynchronousIO object is created with a broadcaster, who will eventually broadcast the stream's data for a listener to handle, and an event type indicating what type of event the broadcaster will broadcast. When the Write method is called on a StreamAsynchronousIO object, the data is appended to an internal string. When the Flush method is called on a StreamAsynchronousIO object, it broadcasts it's data string and clears the string. Anything in lldb-core that needs to generate asynchronous output for the end-user should use the StreamAsynchronousIO objects. I have also added a new notification type for InputReaders, to let them know that a asynchronous output has been written. This is to allow the input readers to, for example, refresh their prompts and lines, if desired. I added the case statements to all the input readers to catch this notification, but I haven't added any code for handling them yet (except to the IOChannel input reader). llvm-svn: 130721
2011-05-03 04:41:46 +08:00
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
reader_sp->Activate();
reader_sp->Run();
reader_sp->Deactivate();
// Remove all input readers that are done from the top of the stack
while (1)
{
IOHandlerSP top_reader_sp = m_input_reader_stack.Top();
if (top_reader_sp && top_reader_sp->GetIsDone())
m_input_reader_stack.Pop();
else
break;
}
This patch captures and serializes all output being written by the command line driver, including the lldb prompt being output by editline, the asynchronous process output & error messages, and asynchronous messages written by target stop-hooks. As part of this it introduces a new Stream class, StreamAsynchronousIO. A StreamAsynchronousIO object is created with a broadcaster, who will eventually broadcast the stream's data for a listener to handle, and an event type indicating what type of event the broadcaster will broadcast. When the Write method is called on a StreamAsynchronousIO object, the data is appended to an internal string. When the Flush method is called on a StreamAsynchronousIO object, it broadcasts it's data string and clears the string. Anything in lldb-core that needs to generate asynchronous output for the end-user should use the StreamAsynchronousIO objects. I have also added a new notification type for InputReaders, to let them know that a asynchronous output has been written. This is to allow the input readers to, for example, refresh their prompts and lines, if desired. I added the case statements to all the input readers to catch this notification, but I haven't added any code for handling them yet (except to the IOChannel input reader). llvm-svn: 130721
2011-05-03 04:41:46 +08:00
}
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
ClearIOHandlers();
This patch captures and serializes all output being written by the command line driver, including the lldb prompt being output by editline, the asynchronous process output & error messages, and asynchronous messages written by target stop-hooks. As part of this it introduces a new Stream class, StreamAsynchronousIO. A StreamAsynchronousIO object is created with a broadcaster, who will eventually broadcast the stream's data for a listener to handle, and an event type indicating what type of event the broadcaster will broadcast. When the Write method is called on a StreamAsynchronousIO object, the data is appended to an internal string. When the Flush method is called on a StreamAsynchronousIO object, it broadcasts it's data string and clears the string. Anything in lldb-core that needs to generate asynchronous output for the end-user should use the StreamAsynchronousIO objects. I have also added a new notification type for InputReaders, to let them know that a asynchronous output has been written. This is to allow the input readers to, for example, refresh their prompts and lines, if desired. I added the case statements to all the input readers to catch this notification, but I haven't added any code for handling them yet (except to the IOChannel input reader). llvm-svn: 130721
2011-05-03 04:41:46 +08:00
}
Make sure writing asynchronous output only backs up & overwrites prompt if the IOChannel input reader is the top input reader. llvm-svn: 131110
2011-05-10 07:06:58 +08:00
bool
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Debugger::IsTopIOHandler (const lldb::IOHandlerSP& reader_sp)
Make sure writing asynchronous output only backs up & overwrites prompt if the IOChannel input reader is the top input reader. llvm-svn: 131110
2011-05-10 07:06:58 +08:00
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
return m_input_reader_stack.IsTop (reader_sp);
}
Make sure writing asynchronous output only backs up & overwrites prompt if the IOChannel input reader is the top input reader. llvm-svn: 131110
2011-05-10 07:06:58 +08:00
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
ConstString
Debugger::GetTopIOHandlerControlSequence(char ch)
{
return m_input_reader_stack.GetTopIOHandlerControlSequence (ch);
Make sure writing asynchronous output only backs up & overwrites prompt if the IOChannel input reader is the top input reader. llvm-svn: 131110
2011-05-10 07:06:58 +08:00
}
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
void
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Debugger::RunIOHandler (const IOHandlerSP& reader_sp)
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
PushIOHandler (reader_sp);
Command files that switch input handlers didn't work, now they do. The issue was when we called Debugger::RunIOHandler(), it would run the current IOHandler by activating it, and running it and then try to pop it and exit regardless of wether it was on top or not. The new code will push the IOHandler that was passed in, and run the IOHandlers until the one passed in is successfully popped. This allows files for the "command source" to switch input handlers: % cat /tmp/commands br s -S alignLeftEdges: br command add bt frame var po self DONE b s -n main br command add bt frame var DONE Note above we set a breakpoint, then add commands do it. The "br command add" will push the breakpoint comment gatherer until it sees "DONE" and then pop itself off the stack. The a new breakpoint will be set and it does the same thing again. Now this file can be sourced from the command line: % lldb -s /tmp/commands /path/to/a.out And your breakpoints will be correctly setup! <rdar://problem/17081650> llvm-svn: 211329
2014-06-20 08:23:57 +08:00
IOHandlerSP top_reader_sp = reader_sp;
while (top_reader_sp)
{
top_reader_sp->Activate();
top_reader_sp->Run();
top_reader_sp->Deactivate();
if (top_reader_sp.get() == reader_sp.get())
{
if (PopIOHandler (reader_sp))
break;
}
while (1)
{
top_reader_sp = m_input_reader_stack.Top();
if (top_reader_sp && top_reader_sp->GetIsDone())
m_input_reader_stack.Pop();
else
break;
}
}
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
}
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
void
Debugger::AdoptTopIOHandlerFilesIfInvalid (StreamFileSP &in, StreamFileSP &out, StreamFileSP &err)
{
// Before an IOHandler runs, it must have in/out/err streams.
// This function is called when one ore more of the streams
// are NULL. We use the top input reader's in/out/err streams,
// or fall back to the debugger file handles, or we fall back
// onto stdin/stdout/stderr as a last resort.
Mutex::Locker locker (m_input_reader_stack.GetMutex());
IOHandlerSP top_reader_sp (m_input_reader_stack.Top());
// If no STDIN has been set, then set it appropriately
if (!in)
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
if (top_reader_sp)
in = top_reader_sp->GetInputStreamFile();
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
else
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
in = GetInputFile();
// If there is nothing, use stdin
if (!in)
in = StreamFileSP(new StreamFile(stdin, false));
}
// If no STDOUT has been set, then set it appropriately
if (!out)
{
if (top_reader_sp)
out = top_reader_sp->GetOutputStreamFile();
else
out = GetOutputFile();
// If there is nothing, use stdout
if (!out)
out = StreamFileSP(new StreamFile(stdout, false));
}
// If no STDERR has been set, then set it appropriately
if (!err)
{
if (top_reader_sp)
err = top_reader_sp->GetErrorStreamFile();
else
err = GetErrorFile();
// If there is nothing, use stderr
if (!err)
err = StreamFileSP(new StreamFile(stdout, false));
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
}
void
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Debugger::PushIOHandler (const IOHandlerSP& reader_sp)
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
if (!reader_sp)
return;
Add a new function to Debugger for finding the top/current input reader. Always make sure the input reader stack is not empty before trying to get the top element from the stack. llvm-svn: 125255
2011-02-10 09:15:13 +08:00
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
// Got the current top input reader...
IOHandlerSP top_reader_sp (m_input_reader_stack.Top());
Add a new function to Debugger for finding the top/current input reader. Always make sure the input reader stack is not empty before trying to get the top element from the stack. llvm-svn: 125255
2011-02-10 09:15:13 +08:00
Fixed all overlapping prompt issues. I carefully reviewed exactly how the IOHandlers interact and found places where we weren't properly controlling things. There should be no overlapping prompts and all output should now come out in a controlled fashion. <rdar://problem/16111293> llvm-svn: 202525
2014-03-01 02:22:24 +08:00
// Don't push the same IO handler twice...
if (reader_sp.get() != top_reader_sp.get())
{
// Push our new input reader
m_input_reader_stack.Push (reader_sp);
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Fixed all overlapping prompt issues. I carefully reviewed exactly how the IOHandlers interact and found places where we weren't properly controlling things. There should be no overlapping prompts and all output should now come out in a controlled fashion. <rdar://problem/16111293> llvm-svn: 202525
2014-03-01 02:22:24 +08:00
// Interrupt the top input reader to it will exit its Run() function
// and let this new input reader take over
if (top_reader_sp)
top_reader_sp->Deactivate();
}
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
bool
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Debugger::PopIOHandler (const IOHandlerSP& pop_reader_sp)
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
bool result = false;
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Mutex::Locker locker (m_input_reader_stack.GetMutex());
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
// The reader on the stop of the stack is done, so let the next
Fix a few typos. llvm-svn: 211851
2014-06-27 10:42:12 +08:00
// read on the stack refresh its prompt and if there is one...
Create new class, InputReaderStack, to better handle mutexes around input readers and prevent deadlocking; modify Debugger to use the new class. llvm-svn: 132475
2011-06-03 03:18:55 +08:00
if (!m_input_reader_stack.IsEmpty())
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
IOHandlerSP reader_sp(m_input_reader_stack.Top());
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
if (!pop_reader_sp || pop_reader_sp.get() == reader_sp.get())
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
reader_sp->Deactivate();
Fixed all overlapping prompt issues. I carefully reviewed exactly how the IOHandlers interact and found places where we weren't properly controlling things. There should be no overlapping prompts and all output should now come out in a controlled fashion. <rdar://problem/16111293> llvm-svn: 202525
2014-03-01 02:22:24 +08:00
reader_sp->Cancel();
Create new class, InputReaderStack, to better handle mutexes around input readers and prevent deadlocking; modify Debugger to use the new class. llvm-svn: 132475
2011-06-03 03:18:55 +08:00
m_input_reader_stack.Pop ();
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
reader_sp = m_input_reader_stack.Top();
if (reader_sp)
reader_sp->Activate();
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
result = true;
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
}
return result;
}
bool
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Debugger::HideTopIOHandler()
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Mutex::Locker locker;
if (locker.TryLock(m_input_reader_stack.GetMutex()))
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
IOHandlerSP reader_sp(m_input_reader_stack.Top());
if (reader_sp)
reader_sp->Hide();
return true;
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
return false;
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
void
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Debugger::RefreshTopIOHandler()
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
IOHandlerSP reader_sp(m_input_reader_stack.Top());
if (reader_sp)
reader_sp->Refresh();
Initial checkin of lldb code from internal Apple repo. llvm-svn: 105619
2010-06-09 00:52:24 +08:00
}
Very large changes that were needed in order to allow multiple connections to the debugger from GUI windows. Previously there was one global debugger instance that could be accessed that had its own command interpreter and current state (current target/process/thread/frame). When a GUI debugger was attached, if it opened more than one window that each had a console window, there were issues where the last one to setup the global debugger object won and got control of the debugger. To avoid this we now create instances of the lldb_private::Debugger that each has its own state: - target list for targets the debugger instance owns - current process/thread/frame - its own command interpreter - its own input, output and error file handles to avoid conflicts - its own input reader stack So now clients should call: SBDebugger::Initialize(); // (static function) SBDebugger debugger (SBDebugger::Create()); // Use which ever file handles you wish debugger.SetErrorFileHandle (stderr, false); debugger.SetOutputFileHandle (stdout, false); debugger.SetInputFileHandle (stdin, true); // main loop SBDebugger::Terminate(); // (static function) SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to ensure nothing gets destroyed too early when multiple clients might be attached. Cleaned up the command interpreter and the CommandObject and all subclasses to take more appropriate arguments. llvm-svn: 106615
2010-06-23 09:19:29 +08:00
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
Added Debugger::GetAsync{Output/Error}Stream, and use it to print parse errors when we go to run a breakpoint condition. llvm-svn: 132517
2011-06-03 07:58:26 +08:00
StreamSP
Debugger::GetAsyncOutputStream ()
{
return StreamSP (new StreamAsynchronousIO (GetCommandInterpreter(),
CommandInterpreter::eBroadcastBitAsynchronousOutputData));
}
StreamSP
Debugger::GetAsyncErrorStream ()
{
return StreamSP (new StreamAsynchronousIO (GetCommandInterpreter(),
CommandInterpreter::eBroadcastBitAsynchronousErrorData));
}
<rdar://problem/13069948> Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary. So I defined a new "lldb::offset_t" which should be used for all file offsets. After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed. Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections. llvm-svn: 173463
2013-01-26 02:06:21 +08:00
size_t
<rdar://problem/10062621> New public API for handling formatters: creating, deleting, modifying categories, and formatters, and managing type/formatter association. This provides SB classes for each of the main object types involved in providing formatter support: SBTypeCategory SBTypeFilter SBTypeFormat SBTypeSummary SBTypeSynthetic plus, an SBTypeNameSpecifier class that is used on the public API layer to abstract the notion that formatters can be applied to plain type-names as well as to regular expressions For naming consistency, this patch also renames a lot of formatters-related classes. Plus, the changes in how flags are handled that started with summaries is now extended to other classes as well. A new enum (lldb::eTypeOption) is meant to support this on the public side. The patch also adds several new calls to the formatter infrastructure that are used to implement by-index accessing and several other design changes required to accommodate the new API layer. An architectural change is introduced in that backing objects for formatters now become writable. On the public API layer, CoW is implemented to prevent unwanted propagation of changes. Lastly, there are some modifications in how the "default" category is constructed and managed in relation to other categories. llvm-svn: 150558
2012-02-15 10:34:21 +08:00
Debugger::GetNumDebuggers()
{
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
if (g_shared_debugger_refcount > 0)
{
Mutex::Locker locker (GetDebuggerListMutex ());
return GetDebuggerList().size();
}
return 0;
<rdar://problem/10062621> New public API for handling formatters: creating, deleting, modifying categories, and formatters, and managing type/formatter association. This provides SB classes for each of the main object types involved in providing formatter support: SBTypeCategory SBTypeFilter SBTypeFormat SBTypeSummary SBTypeSynthetic plus, an SBTypeNameSpecifier class that is used on the public API layer to abstract the notion that formatters can be applied to plain type-names as well as to regular expressions For naming consistency, this patch also renames a lot of formatters-related classes. Plus, the changes in how flags are handled that started with summaries is now extended to other classes as well. A new enum (lldb::eTypeOption) is meant to support this on the public side. The patch also adds several new calls to the formatter infrastructure that are used to implement by-index accessing and several other design changes required to accommodate the new API layer. An architectural change is introduced in that backing objects for formatters now become writable. On the public API layer, CoW is implemented to prevent unwanted propagation of changes. Lastly, there are some modifications in how the "default" category is constructed and managed in relation to other categories. llvm-svn: 150558
2012-02-15 10:34:21 +08:00
}
lldb::DebuggerSP
<rdar://problem/13069948> Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary. So I defined a new "lldb::offset_t" which should be used for all file offsets. After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed. Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections. llvm-svn: 173463
2013-01-26 02:06:21 +08:00
Debugger::GetDebuggerAtIndex (size_t index)
<rdar://problem/10062621> New public API for handling formatters: creating, deleting, modifying categories, and formatters, and managing type/formatter association. This provides SB classes for each of the main object types involved in providing formatter support: SBTypeCategory SBTypeFilter SBTypeFormat SBTypeSummary SBTypeSynthetic plus, an SBTypeNameSpecifier class that is used on the public API layer to abstract the notion that formatters can be applied to plain type-names as well as to regular expressions For naming consistency, this patch also renames a lot of formatters-related classes. Plus, the changes in how flags are handled that started with summaries is now extended to other classes as well. A new enum (lldb::eTypeOption) is meant to support this on the public side. The patch also adds several new calls to the formatter infrastructure that are used to implement by-index accessing and several other design changes required to accommodate the new API layer. An architectural change is introduced in that backing objects for formatters now become writable. On the public API layer, CoW is implemented to prevent unwanted propagation of changes. Lastly, there are some modifications in how the "default" category is constructed and managed in relation to other categories. llvm-svn: 150558
2012-02-15 10:34:21 +08:00
{
DebuggerSP debugger_sp;
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
if (g_shared_debugger_refcount > 0)
{
Mutex::Locker locker (GetDebuggerListMutex ());
DebuggerList &debugger_list = GetDebuggerList();
<rdar://problem/10062621> New public API for handling formatters: creating, deleting, modifying categories, and formatters, and managing type/formatter association. This provides SB classes for each of the main object types involved in providing formatter support: SBTypeCategory SBTypeFilter SBTypeFormat SBTypeSummary SBTypeSynthetic plus, an SBTypeNameSpecifier class that is used on the public API layer to abstract the notion that formatters can be applied to plain type-names as well as to regular expressions For naming consistency, this patch also renames a lot of formatters-related classes. Plus, the changes in how flags are handled that started with summaries is now extended to other classes as well. A new enum (lldb::eTypeOption) is meant to support this on the public side. The patch also adds several new calls to the formatter infrastructure that are used to implement by-index accessing and several other design changes required to accommodate the new API layer. An architectural change is introduced in that backing objects for formatters now become writable. On the public API layer, CoW is implemented to prevent unwanted propagation of changes. Lastly, there are some modifications in how the "default" category is constructed and managed in relation to other categories. llvm-svn: 150558
2012-02-15 10:34:21 +08:00
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
if (index < debugger_list.size())
debugger_sp = debugger_list[index];
}
<rdar://problem/10062621> New public API for handling formatters: creating, deleting, modifying categories, and formatters, and managing type/formatter association. This provides SB classes for each of the main object types involved in providing formatter support: SBTypeCategory SBTypeFilter SBTypeFormat SBTypeSummary SBTypeSynthetic plus, an SBTypeNameSpecifier class that is used on the public API layer to abstract the notion that formatters can be applied to plain type-names as well as to regular expressions For naming consistency, this patch also renames a lot of formatters-related classes. Plus, the changes in how flags are handled that started with summaries is now extended to other classes as well. A new enum (lldb::eTypeOption) is meant to support this on the public side. The patch also adds several new calls to the formatter infrastructure that are used to implement by-index accessing and several other design changes required to accommodate the new API layer. An architectural change is introduced in that backing objects for formatters now become writable. On the public API layer, CoW is implemented to prevent unwanted propagation of changes. Lastly, there are some modifications in how the "default" category is constructed and managed in relation to other categories. llvm-svn: 150558
2012-02-15 10:34:21 +08:00
return debugger_sp;
}
Add a unique ID to each debugger instance. Add functions to look up debugger by id Add global variable to lldb python module, to hold debugger id Modify embedded Python interpreter to update the global variable with the id of its current debugger. Modify the char ** typemap definition in lldb.swig to accept 'None' (for NULL) as a valid value. The point of all this is so that, when you drop into the embedded interpreter from the command interpreter (or when doing Python-based breakpoint commands), there is a way for the Python side to find/get the correct debugger instance ( by checking debugger_unique_id, then calling SBDebugger::FindDebuggerWithID on it). llvm-svn: 107287
2010-07-01 00:22:25 +08:00
DebuggerSP
Debugger::FindDebuggerWithID (lldb::user_id_t id)
{
Adopt the intrusive pointers in: lldb_private::Breakpoint lldb_private::BreakpointLocations lldb_private::BreakpointSite lldb_private::Debugger lldb_private::StackFrame lldb_private::Thread lldb_private::Target llvm-svn: 139985
2011-09-17 16:33:22 +08:00
DebuggerSP debugger_sp;
Add a unique ID to each debugger instance. Add functions to look up debugger by id Add global variable to lldb python module, to hold debugger id Modify embedded Python interpreter to update the global variable with the id of its current debugger. Modify the char ** typemap definition in lldb.swig to accept 'None' (for NULL) as a valid value. The point of all this is so that, when you drop into the embedded interpreter from the command interpreter (or when doing Python-based breakpoint commands), there is a way for the Python side to find/get the correct debugger instance ( by checking debugger_unique_id, then calling SBDebugger::FindDebuggerWithID on it). llvm-svn: 107287
2010-07-01 00:22:25 +08:00
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
if (g_shared_debugger_refcount > 0)
Add a unique ID to each debugger instance. Add functions to look up debugger by id Add global variable to lldb python module, to hold debugger id Modify embedded Python interpreter to update the global variable with the id of its current debugger. Modify the char ** typemap definition in lldb.swig to accept 'None' (for NULL) as a valid value. The point of all this is so that, when you drop into the embedded interpreter from the command interpreter (or when doing Python-based breakpoint commands), there is a way for the Python side to find/get the correct debugger instance ( by checking debugger_unique_id, then calling SBDebugger::FindDebuggerWithID on it). llvm-svn: 107287
2010-07-01 00:22:25 +08:00
{
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
Mutex::Locker locker (GetDebuggerListMutex ());
DebuggerList &debugger_list = GetDebuggerList();
DebuggerList::iterator pos, end = debugger_list.end();
for (pos = debugger_list.begin(); pos != end; ++pos)
Add a unique ID to each debugger instance. Add functions to look up debugger by id Add global variable to lldb python module, to hold debugger id Modify embedded Python interpreter to update the global variable with the id of its current debugger. Modify the char ** typemap definition in lldb.swig to accept 'None' (for NULL) as a valid value. The point of all this is so that, when you drop into the embedded interpreter from the command interpreter (or when doing Python-based breakpoint commands), there is a way for the Python side to find/get the correct debugger instance ( by checking debugger_unique_id, then calling SBDebugger::FindDebuggerWithID on it). llvm-svn: 107287
2010-07-01 00:22:25 +08:00
{
<rdar://problem/11148044> Fixed a potential crasher that could happen after Debugger::Terminate() was called. llvm-svn: 153774
2012-03-31 04:53:46 +08:00
if ((*pos).get()->GetID() == id)
{
debugger_sp = *pos;
break;
}
Add a unique ID to each debugger instance. Add functions to look up debugger by id Add global variable to lldb python module, to hold debugger id Modify embedded Python interpreter to update the global variable with the id of its current debugger. Modify the char ** typemap definition in lldb.swig to accept 'None' (for NULL) as a valid value. The point of all this is so that, when you drop into the embedded interpreter from the command interpreter (or when doing Python-based breakpoint commands), there is a way for the Python side to find/get the correct debugger instance ( by checking debugger_unique_id, then calling SBDebugger::FindDebuggerWithID on it). llvm-svn: 107287
2010-07-01 00:22:25 +08:00
}
}
return debugger_sp;
}
This is a very large commit that completely re-does the way lldb handles user settable internal variables (the equivalent of set/show variables in gdb). In addition to the basic infrastructure (most of which is defined in UserSettingsController.{h,cpp}, there are examples of two classes that have been set up to contain user settable variables (the Debugger and Process classes). The 'settings' command has been modified to be a command-subcommand structure, and the 'set', 'show' and 'append' commands have been moved into this sub-commabnd structure. The old StateVariable class has been completely replaced by this, and the state variable dictionary has been removed from the Command Interpreter. Places that formerly accessed the state variable mechanism have been modified to access the variables in this new structure instead (checking the term-width; getting/checking the prompt; etc.) Variables are attached to classes; there are two basic "flavors" of variables that can be set: "global" variables (static/class-wide), and "instance" variables (one per instance of the class). The whole thing has been set up so that any global or instance variable can be set at any time (e.g. on start up, in your .lldbinit file), whether or not any instances actually exist (there's a whole pending and default values mechanism to help deal with that). llvm-svn: 113041
2010-09-04 08:03:46 +08:00
Core: preprocess out TestPromptFormats TestPromptFormats appears as though it may be a useful unit test. Unfortunately, there is no invocation mechanism in place right now. It is unclear how to add a unit test for this scenario to the existing tests. It would be ideal to remove this entirely, but I am hopeful that this can/will be pulled out into a test still since it uses a user accessible interface. llvm-svn: 204309
2014-03-20 14:08:21 +08:00
#if 0
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
static void
Roll back the changes I made in r193907 which created a new Frame pure virtual base class and made StackFrame a subclass of that. As I started to build on top of that arrangement today, I found that it wasn't working out like I intended. Instead I'll try sticking with the single StackFrame class -- there's too much code duplication to make a more complicated class hierarchy sensible I think. llvm-svn: 193983
2013-11-04 17:33:30 +08:00
TestPromptFormats (StackFrame *frame)
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
if (frame == NULL)
return;
StreamString s;
const char *prompt_format =
"{addr = '${addr}'\n}"
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
"{addr-file-or-load = '${addr-file-or-load}'\n}"
"{current-pc-arrow = '${current-pc-arrow}'\n}"
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
"{process.id = '${process.id}'\n}"
"{process.name = '${process.name}'\n}"
"{process.file.basename = '${process.file.basename}'\n}"
"{process.file.fullpath = '${process.file.fullpath}'\n}"
"{thread.id = '${thread.id}'\n}"
"{thread.index = '${thread.index}'\n}"
"{thread.name = '${thread.name}'\n}"
"{thread.queue = '${thread.queue}'\n}"
"{thread.stop-reason = '${thread.stop-reason}'\n}"
"{target.arch = '${target.arch}'\n}"
"{module.file.basename = '${module.file.basename}'\n}"
"{module.file.fullpath = '${module.file.fullpath}'\n}"
"{file.basename = '${file.basename}'\n}"
"{file.fullpath = '${file.fullpath}'\n}"
"{frame.index = '${frame.index}'\n}"
"{frame.pc = '${frame.pc}'\n}"
"{frame.sp = '${frame.sp}'\n}"
"{frame.fp = '${frame.fp}'\n}"
"{frame.flags = '${frame.flags}'\n}"
"{frame.reg.rdi = '${frame.reg.rdi}'\n}"
"{frame.reg.rip = '${frame.reg.rip}'\n}"
"{frame.reg.rsp = '${frame.reg.rsp}'\n}"
"{frame.reg.rbp = '${frame.reg.rbp}'\n}"
"{frame.reg.rflags = '${frame.reg.rflags}'\n}"
"{frame.reg.xmm0 = '${frame.reg.xmm0}'\n}"
"{frame.reg.carp = '${frame.reg.carp}'\n}"
"{function.id = '${function.id}'\n}"
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
"{function.changed = '${function.changed}'\n}"
"{function.initial-function = '${function.initial-function}'\n}"
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
"{function.name = '${function.name}'\n}"
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
"{function.name-without-args = '${function.name-without-args}'\n}"
<rdar://problem/10684141> When the lldb_private::Debugger goes away, it should cleanup all of its targets. llvm-svn: 148189
2012-01-15 01:04:19 +08:00
"{function.name-with-args = '${function.name-with-args}'\n}"
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
"{function.addr-offset = '${function.addr-offset}'\n}"
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
"{function.concrete-only-addr-offset-no-padding = '${function.concrete-only-addr-offset-no-padding}'\n}"
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
"{function.line-offset = '${function.line-offset}'\n}"
"{function.pc-offset = '${function.pc-offset}'\n}"
"{line.file.basename = '${line.file.basename}'\n}"
"{line.file.fullpath = '${line.file.fullpath}'\n}"
"{line.number = '${line.number}'\n}"
"{line.start-addr = '${line.start-addr}'\n}"
"{line.end-addr = '${line.end-addr}'\n}"
;
SymbolContext sc (frame->GetSymbolContext(eSymbolContextEverything));
ExecutionContext exe_ctx;
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
frame->CalculateExecutionContext(exe_ctx);
Add ${ansi.XX} parsing to lldb prompt, use-color setting, and -no-use-colors command line options. settings set use-color [false|true] settings set prompt "${ansi.bold}${ansi.fg.green}(lldb)${ansi.normal} " also "--no-use-colors" on the command prompt llvm-svn: 182609
2013-05-24 04:47:45 +08:00
if (Debugger::FormatPrompt (prompt_format, &sc, &exe_ctx, &sc.line_entry.range.GetBaseAddress(), s))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
printf("%s\n", s.GetData());
}
else
{
printf ("what we got: %s\n", s.GetData());
}
}
Core: preprocess out TestPromptFormats TestPromptFormats appears as though it may be a useful unit test. Unfortunately, there is no invocation mechanism in place right now. It is unclear how to add a unit test for this scenario to the existing tests. It would be ideal to remove this entirely, but I am hopeful that this can/will be pulled out into a test still since it uses a user accessible interface. llvm-svn: 204309
2014-03-20 14:08:21 +08:00
#endif
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
static bool
Additional code cleanups ; Short option name for --python-script in type summary add moved from -s to -o (this is a preliminary step in moving the short option for --summary-string from -f to -s) ; Accordingly updated the test suite llvm-svn: 138315
2011-08-23 08:32:52 +08:00
ScanFormatDescriptor (const char* var_name_begin,
const char* var_name_end,
const char** var_name_final,
const char** percent_position,
Adopt the intrusive pointers in: lldb_private::Breakpoint lldb_private::BreakpointLocations lldb_private::BreakpointSite lldb_private::Debugger lldb_private::StackFrame lldb_private::Thread lldb_private::Target llvm-svn: 139985
2011-09-17 16:33:22 +08:00
Format* custom_format,
Additional code cleanups ; Short option name for --python-script in type summary add moved from -s to -o (this is a preliminary step in moving the short option for --summary-string from -f to -s) ; Accordingly updated the test suite llvm-svn: 138315
2011-08-23 08:32:52 +08:00
ValueObject::ValueObjectRepresentationStyle* val_obj_display)
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
{
<rdar://problem/13521159> LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down. All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down. llvm-svn: 178191
2013-03-28 07:08:40 +08:00
Log *log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_TYPES));
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
*percent_position = ::strchr(var_name_begin,'%');
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
if (!*percent_position || *percent_position > var_name_end)
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
{
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[ScanFormatDescriptor] no format descriptor in string, skipping");
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
*var_name_final = var_name_end;
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
}
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
else
{
*var_name_final = *percent_position;
Converting ScanFormatDescriptor to use std::string instead of a manually managed buffer of bytes llvm-svn: 181218
2013-05-07 01:18:22 +08:00
std::string format_name(*var_name_final+1, var_name_end-*var_name_final-1);
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
<rdar://problem/12717717> Modifying our data formatters matching algorithm to ensure that "const X*" is treated as equivalent to "X*" Also, a couple improvements to the "lldb types" logging llvm-svn: 184215
2013-06-19 02:23:07 +08:00
log->Printf("[ScanFormatDescriptor] parsing %s as a format descriptor", format_name.c_str());
Converting ScanFormatDescriptor to use std::string instead of a manually managed buffer of bytes llvm-svn: 181218
2013-05-07 01:18:22 +08:00
if ( !FormatManager::GetFormatFromCString(format_name.c_str(),
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
true,
*custom_format) )
{
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
<rdar://problem/12717717> Modifying our data formatters matching algorithm to ensure that "const X*" is treated as equivalent to "X*" Also, a couple improvements to the "lldb types" logging llvm-svn: 184215
2013-06-19 02:23:07 +08:00
log->Printf("[ScanFormatDescriptor] %s is an unknown format", format_name.c_str());
Converting ScanFormatDescriptor to use std::string instead of a manually managed buffer of bytes llvm-svn: 181218
2013-05-07 01:18:22 +08:00
switch (format_name.front())
{
case '@': // if this is an @ sign, print ObjC description
*val_obj_display = ValueObject::eValueObjectRepresentationStyleLanguageSpecific;
break;
case 'V': // if this is a V, print the value using the default format
*val_obj_display = ValueObject::eValueObjectRepresentationStyleValue;
break;
case 'L': // if this is an L, print the location of the value
*val_obj_display = ValueObject::eValueObjectRepresentationStyleLocation;
break;
case 'S': // if this is an S, print the summary after all
*val_obj_display = ValueObject::eValueObjectRepresentationStyleSummary;
break;
case '#': // if this is a '#', print the number of children
*val_obj_display = ValueObject::eValueObjectRepresentationStyleChildrenCount;
break;
case 'T': // if this is a 'T', print the type
*val_obj_display = ValueObject::eValueObjectRepresentationStyleType;
break;
Adding two new markers to the ${var..} specifier - %N = show the name of the variable - %> = show the expression path of the variable llvm-svn: 184502
2013-06-21 08:04:51 +08:00
case 'N': // if this is a 'N', print the name
*val_obj_display = ValueObject::eValueObjectRepresentationStyleName;
break;
case '>': // if this is a '>', print the name
*val_obj_display = ValueObject::eValueObjectRepresentationStyleExpressionPath;
break;
Converting ScanFormatDescriptor to use std::string instead of a manually managed buffer of bytes llvm-svn: 181218
2013-05-07 01:18:22 +08:00
default:
Fixed a few obvious errors pointed out by the static analyzer. llvm-svn: 181911
2013-05-16 02:27:08 +08:00
if (log)
log->Printf("ScanFormatDescriptor] %s is an error, leaving the previous value alone", format_name.c_str());
Converting ScanFormatDescriptor to use std::string instead of a manually managed buffer of bytes llvm-svn: 181218
2013-05-07 01:18:22 +08:00
break;
}
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
}
// a good custom format tells us to print the value using it
else
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
{
if (log)
<rdar://problem/12717717> Modifying our data formatters matching algorithm to ensure that "const X*" is treated as equivalent to "X*" Also, a couple improvements to the "lldb types" logging llvm-svn: 184215
2013-06-19 02:23:07 +08:00
log->Printf("[ScanFormatDescriptor] will display value for this VO");
Massive enumeration name changes: a number of enums in ValueObject were not following the naming pattern Changes to synthetic children: - the update(self): function can now (optionally) return a value - if it returns boolean value True, ValueObjectSyntheticFilter will not clear its caches across stop-points this should allow better performance for Python-based synthetic children when one can be sure that the child ValueObjects have not changed - making a difference between a synthetic VO and a VO with a synthetic value: now a ValueObjectSyntheticFilter will not return itself as its own synthetic value, but will (correctly) claim to itself be synthetic - cleared up the internal synthetic children architecture to make a more consistent use of pointers and references instead of shared pointers when possible - major cleanup of unnecessary #include, data and functions in ValueObjectSyntheticFilter itself - removed the SyntheticValueType enum and replaced it with a plain boolean (to which it was equivalent in the first place) Some clean ups to the summary generation code Centralized the code that clears out user-visible strings and data in ValueObject More efficient summaries for libc++ containers llvm-svn: 153061
2012-03-20 06:58:49 +08:00
*val_obj_display = ValueObject::eValueObjectRepresentationStyleValue;
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
}
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
}
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
<rdar://problem/12717717> Modifying our data formatters matching algorithm to ensure that "const X*" is treated as equivalent to "X*" Also, a couple improvements to the "lldb types" logging llvm-svn: 184215
2013-06-19 02:23:07 +08:00
log->Printf("[ScanFormatDescriptor] final format description outcome: custom_format = %d, val_obj_display = %d",
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
*custom_format,
*val_obj_display);
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
return true;
}
static bool
Additional code cleanups ; Short option name for --python-script in type summary add moved from -s to -o (this is a preliminary step in moving the short option for --summary-string from -f to -s) ; Accordingly updated the test suite llvm-svn: 138315
2011-08-23 08:32:52 +08:00
ScanBracketedRange (const char* var_name_begin,
const char* var_name_end,
const char* var_name_final,
const char** open_bracket_position,
const char** separator_position,
const char** close_bracket_position,
const char** var_name_final_if_array_range,
int64_t* index_lower,
int64_t* index_higher)
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
{
<rdar://problem/13521159> LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down. All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down. llvm-svn: 178191
2013-03-28 07:08:40 +08:00
Log *log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_TYPES));
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
*open_bracket_position = ::strchr(var_name_begin,'[');
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
if (*open_bracket_position && *open_bracket_position < var_name_final)
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
{
*separator_position = ::strchr(*open_bracket_position,'-'); // might be NULL if this is a simple var[N] bitfield
*close_bracket_position = ::strchr(*open_bracket_position,']');
// as usual, we assume that [] will come before %
//printf("trying to expand a []\n");
*var_name_final_if_array_range = *open_bracket_position;
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
if (*close_bracket_position - *open_bracket_position == 1)
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
{
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[ScanBracketedRange] '[]' detected.. going from 0 to end of data");
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
*index_lower = 0;
}
else if (*separator_position == NULL || *separator_position > var_name_end)
{
char *end = NULL;
*index_lower = ::strtoul (*open_bracket_position+1, &end, 0);
*index_higher = *index_lower;
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
Resolve printf formatting warnings on Linux: - use macros from inttypes.h for format strings instead of OS-specific types Patch from Matt Kopec! llvm-svn: 168945
2012-11-30 05:49:15 +08:00
log->Printf("[ScanBracketedRange] [%" PRId64 "] detected, high index is same", *index_lower);
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
}
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
else if (*close_bracket_position && *close_bracket_position < var_name_end)
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
{
char *end = NULL;
*index_lower = ::strtoul (*open_bracket_position+1, &end, 0);
*index_higher = ::strtoul (*separator_position+1, &end, 0);
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
Resolve printf formatting warnings on Linux: - use macros from inttypes.h for format strings instead of OS-specific types Patch from Matt Kopec! llvm-svn: 168945
2012-11-30 05:49:15 +08:00
log->Printf("[ScanBracketedRange] [%" PRId64 "-%" PRId64 "] detected", *index_lower, *index_higher);
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
}
else
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
{
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[ScanBracketedRange] expression is erroneous, cannot extract indices out of it");
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
return false;
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
}
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
if (*index_lower > *index_higher && *index_higher > 0)
{
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[ScanBracketedRange] swapping indices");
<rdar://problem/13069948> Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary. So I defined a new "lldb::offset_t" which should be used for all file offsets. After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed. Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections. llvm-svn: 173463
2013-01-26 02:06:21 +08:00
int64_t temp = *index_lower;
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
*index_lower = *index_higher;
*index_higher = temp;
}
}
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
else if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[ScanBracketedRange] no bracketed range, skipping entirely");
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
return true;
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
template <typename T>
static bool RunScriptFormatKeyword(Stream &s, ScriptInterpreter *script_interpreter, T t, const std::string& script_name)
{
if (script_interpreter)
{
Error script_error;
std::string script_output;
if (script_interpreter->RunScriptFormatKeyword(script_name.c_str(), t, script_output, script_error) && script_error.Success())
{
s.Printf("%s", script_output.c_str());
return true;
}
else
{
s.Printf("<error: %s>",script_error.AsCString());
}
}
return false;
}
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
static ValueObjectSP
Additional code cleanups ; Short option name for --python-script in type summary add moved from -s to -o (this is a preliminary step in moving the short option for --summary-string from -f to -s) ; Accordingly updated the test suite llvm-svn: 138315
2011-08-23 08:32:52 +08:00
ExpandIndexedExpression (ValueObject* valobj,
<rdar://problem/13069948> Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary. So I defined a new "lldb::offset_t" which should be used for all file offsets. After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed. Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections. llvm-svn: 173463
2013-01-26 02:06:21 +08:00
size_t index,
Roll back the changes I made in r193907 which created a new Frame pure virtual base class and made StackFrame a subclass of that. As I started to build on top of that arrangement today, I found that it wasn't working out like I intended. Instead I'll try sticking with the single StackFrame class -- there's too much code duplication to make a more complicated class hierarchy sensible I think. llvm-svn: 193983
2013-11-04 17:33:30 +08:00
StackFrame* frame,
Additional code cleanups ; Short option name for --python-script in type summary add moved from -s to -o (this is a preliminary step in moving the short option for --summary-string from -f to -s) ; Accordingly updated the test suite llvm-svn: 138315
2011-08-23 08:32:52 +08:00
bool deref_pointer)
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
{
<rdar://problem/13521159> LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down. All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down. llvm-svn: 178191
2013-03-28 07:08:40 +08:00
Log *log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_TYPES));
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
const char* ptr_deref_format = "[%d]";
Moving from std::auto_ptr<char> to std::string for simple string memory management. It is better practice and, also, it is not clear whether std::auto_ptr<> is smart enough to know about delete[] vs. delete llvm-svn: 174236
2013-02-02 07:59:44 +08:00
std::string ptr_deref_buffer(10,0);
::sprintf(&ptr_deref_buffer[0], ptr_deref_format, index);
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
Moving from std::auto_ptr<char> to std::string for simple string memory management. It is better practice and, also, it is not clear whether std::auto_ptr<> is smart enough to know about delete[] vs. delete llvm-svn: 174236
2013-02-02 07:59:44 +08:00
log->Printf("[ExpandIndexedExpression] name to deref: %s",ptr_deref_buffer.c_str());
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
const char* first_unparsed;
ValueObject::GetValueForExpressionPathOptions options;
ValueObject::ExpressionPathEndResultType final_value_type;
ValueObject::ExpressionPathScanEndReason reason_to_stop;
Massive enumeration name changes: a number of enums in ValueObject were not following the naming pattern Changes to synthetic children: - the update(self): function can now (optionally) return a value - if it returns boolean value True, ValueObjectSyntheticFilter will not clear its caches across stop-points this should allow better performance for Python-based synthetic children when one can be sure that the child ValueObjects have not changed - making a difference between a synthetic VO and a VO with a synthetic value: now a ValueObjectSyntheticFilter will not return itself as its own synthetic value, but will (correctly) claim to itself be synthetic - cleared up the internal synthetic children architecture to make a more consistent use of pointers and references instead of shared pointers when possible - major cleanup of unnecessary #include, data and functions in ValueObjectSyntheticFilter itself - removed the SyntheticValueType enum and replaced it with a plain boolean (to which it was equivalent in the first place) Some clean ups to the summary generation code Centralized the code that clears out user-visible strings and data in ValueObject More efficient summaries for libc++ containers llvm-svn: 153061
2012-03-20 06:58:49 +08:00
ValueObject::ExpressionPathAftermath what_next = (deref_pointer ? ValueObject::eExpressionPathAftermathDereference : ValueObject::eExpressionPathAftermathNothing);
Moving from std::auto_ptr<char> to std::string for simple string memory management. It is better practice and, also, it is not clear whether std::auto_ptr<> is smart enough to know about delete[] vs. delete llvm-svn: 174236
2013-02-02 07:59:44 +08:00
ValueObjectSP item = valobj->GetValueForExpressionPath (ptr_deref_buffer.c_str(),
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
&first_unparsed,
&reason_to_stop,
&final_value_type,
options,
&what_next);
if (!item)
{
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[ExpandIndexedExpression] ERROR: unparsed portion = %s, why stopping = %d,"
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
" final_value_type %d",
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
first_unparsed, reason_to_stop, final_value_type);
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
}
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
else
{
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[ExpandIndexedExpression] ALL RIGHT: unparsed portion = %s, why stopping = %d,"
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
" final_value_type %d",
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
first_unparsed, reason_to_stop, final_value_type);
}
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
return item;
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
static inline bool
IsToken(const char *var_name_begin, const char *var)
{
return (::strncmp (var_name_begin, var, strlen(var)) == 0);
}
static bool
IsTokenWithFormat(const char *var_name_begin, const char *var, std::string &format, const char *default_format,
const ExecutionContext *exe_ctx_ptr, const SymbolContext *sc_ptr)
{
int var_len = strlen(var);
if (::strncmp (var_name_begin, var, var_len) == 0)
{
var_name_begin += var_len;
if (*var_name_begin == '}')
{
format = default_format;
return true;
}
else if (*var_name_begin == '%')
{
// Allow format specifiers: x|X|u with optional width specifiers.
// ${thread.id%x} ; hex
// ${thread.id%X} ; uppercase hex
// ${thread.id%u} ; unsigned decimal
// ${thread.id%8.8X} ; width.precision + specifier
// ${thread.id%tid} ; unsigned on FreeBSD/Linux, otherwise default_format (0x%4.4x for thread.id)
int dot_count = 0;
const char *specifier = NULL;
int width_precision_length = 0;
const char *width_precision = ++var_name_begin;
while (isdigit(*var_name_begin) || *var_name_begin == '.')
{
dot_count += (*var_name_begin == '.');
if (dot_count > 1)
break;
var_name_begin++;
width_precision_length++;
}
if (IsToken (var_name_begin, "tid}"))
{
Target *target = Target::GetTargetFromContexts (exe_ctx_ptr, sc_ptr);
if (target)
{
ArchSpec arch (target->GetArchitecture ());
llvm::Triple::OSType ostype = arch.IsValid() ? arch.GetTriple().getOS() : llvm::Triple::UnknownOS;
if ((ostype == llvm::Triple::FreeBSD) || (ostype == llvm::Triple::Linux))
specifier = PRIu64;
}
if (!specifier)
{
format = default_format;
return true;
}
}
else if (IsToken (var_name_begin, "x}"))
specifier = PRIx64;
else if (IsToken (var_name_begin, "X}"))
specifier = PRIX64;
else if (IsToken (var_name_begin, "u}"))
specifier = PRIu64;
if (specifier)
{
format = "%";
if (width_precision_length)
format += std::string(width_precision, width_precision_length);
format += specifier;
return true;
}
}
}
return false;
}
Initial merge of some of the iOS 8 / Mac OS X Yosemite specific lldb support. I'll be doing more testing & cleanup but I wanted to get the initial checkin done. This adds a new SBExpressionOptions::SetLanguage API for selecting a language of an expression. I added adds a new SBThread::GetInfoItemByPathString for retriving information about a thread from that thread's StructuredData. I added a new StructuredData class for representing key-value/array/dictionary information (e.g. JSON formatted data). Helper functions to read JSON and create a StructuredData object, and to print a StructuredData object in JSON format are included. A few Cocoa / Cocoa Touch data formatters were updated by Enrico to track changes in iOS 8 / Yosemite. Before we query a thread's extended information, the system runtime may provide hints to the remote debug stub that it will use to retrieve values out of runtime structures. I added a new SystemRuntime method AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add key-value type data to the initial request that we send to the remote stub. The thread-format formatter string can now retrieve values out of a thread's extended info structured data. The default thread-format string picks up two of these - thread.info.activity.name and thread.info.trace_messages. I added a new "jThreadExtendedInfo" packet in debugserver; I will add documentation to the lldb-gdb-remote.txt doc soon. It accepts JSON formatted arguments (most importantly, "thread":threadnum) and it returns a variety of information regarding the thread to lldb in JSON format. This JSON return is scanned into a StructuredData object that is associated with the thread; UI layers can query the thread's StructuredData to see if key-values are present, and if so, show them to the user. These key-values are likely to be specific to different targets with some commonality among many targets. For instance, many targets will be able to advertise the pthread_t value for a thread. I added an initial rough cut of "thread info" command which will print the information about a thread from the jThreadExtendedInfo result. I need to do more work to make this format reasonably. Han Ming added calls into the pmenergy and pmsample libraries if debugserver is run on Mac OS X Yosemite to get information about the inferior's power use. I added support to debugserver for gathering the Genealogy information about threads, if it exists, and returning it in the jThreadExtendedInfo JSON result. llvm-svn: 210874
2014-06-13 10:37:02 +08:00
// Find information for the "thread.info.*" specifiers in a format string
static bool
FormatThreadExtendedInfoRecurse
(
const char *var_name_begin,
StructuredData::ObjectSP thread_info_dictionary,
const SymbolContext *sc,
const ExecutionContext *exe_ctx,
Stream &s
)
{
bool var_success = false;
std::string token_format;
llvm::StringRef var_name(var_name_begin);
size_t percent_idx = var_name.find('%');
size_t close_curly_idx = var_name.find('}');
llvm::StringRef path = var_name;
llvm::StringRef formatter = var_name;
// 'path' will be the dot separated list of objects to transverse up until we hit
// a close curly brace, a percent sign, or an end of string.
if (percent_idx != llvm::StringRef::npos || close_curly_idx != llvm::StringRef::npos)
{
if (percent_idx != llvm::StringRef::npos && close_curly_idx != llvm::StringRef::npos)
{
if (percent_idx < close_curly_idx)
{
path = var_name.slice(0, percent_idx);
formatter = var_name.substr (percent_idx);
}
else
{
path = var_name.slice(0, close_curly_idx);
formatter = var_name.substr (close_curly_idx);
}
}
else if (percent_idx != llvm::StringRef::npos)
{
path = var_name.slice(0, percent_idx);
formatter = var_name.substr (percent_idx);
}
else if (close_curly_idx != llvm::StringRef::npos)
{
path = var_name.slice(0, close_curly_idx);
formatter = var_name.substr (close_curly_idx);
}
}
StructuredData::ObjectSP value = thread_info_dictionary->GetObjectForDotSeparatedPath (path);
if (value.get())
{
if (value->GetType() == StructuredData::Type::eTypeInteger)
{
if (IsTokenWithFormat (formatter.str().c_str(), "", token_format, "0x%4.4" PRIx64, exe_ctx, sc))
{
s.Printf(token_format.c_str(), value->GetAsInteger()->GetValue());
var_success = true;
}
}
else if (value->GetType() == StructuredData::Type::eTypeFloat)
{
s.Printf ("%f", value->GetAsFloat()->GetValue());
var_success = true;
}
else if (value->GetType() == StructuredData::Type::eTypeString)
{
s.Printf("%s", value->GetAsString()->GetValue().c_str());
var_success = true;
}
else if (value->GetType() == StructuredData::Type::eTypeArray)
{
if (value->GetAsArray()->GetSize() > 0)
{
s.Printf ("%zu", value->GetAsArray()->GetSize());
var_success = true;
}
}
else if (value->GetType() == StructuredData::Type::eTypeDictionary)
{
s.Printf ("%zu", value->GetAsDictionary()->GetKeys()->GetAsArray()->GetSize());
var_success = true;
}
}
return var_success;
}
Add ${ansi.XX} parsing to lldb prompt, use-color setting, and -no-use-colors command line options. settings set use-color [false|true] settings set prompt "${ansi.bold}${ansi.fg.green}(lldb)${ansi.normal} " also "--no-use-colors" on the command prompt llvm-svn: 182609
2013-05-24 04:47:45 +08:00
static bool
FormatPromptRecurse
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
(
const char *format,
const SymbolContext *sc,
const ExecutionContext *exe_ctx,
const Address *addr,
Stream &s,
This commit adds a new top subcommand "summary" to command type named "type". Currently this command implements three commands: type summary add <format> <typename1> [<typename2> ...] type summary delete <typename1> [<typename2> ...] type summary list [<typename1> [<typename2>] ...] type summary clear This allows you to specify the default format that will be used to display summaries for variables, shown when you use "frame variable" or "expression", or the SBValue classes. Examples: type summary add "x = ${var.x}" Point type summary list type summary add --one-liner SimpleType llvm-svn: 134108
2011-06-30 06:27:15 +08:00
const char **end,
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
ValueObject* valobj,
bool function_changed,
bool initial_function
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
)
{
First round of code cleanups: - all instances of "vobj" have been renamed to "valobj" - class Debugger::Formatting has been renamed to DataVisualization (defined in FormatManager.h/cpp) The interface to this class has not changed - FormatCategory now uses ConstString's as keys to the navigators instead of repeatedly casting from ConstString to const char* and back all the time Next step is making the same happen for categories themselves - category gnu-libstdc++ is defined in the constructor for a FormatManager The source code for it is defined in gnu_libstdcpp.py, drawn from examples/synthetic at compile time All references to previous 'osxcpp' name have been removed from both code and file names Functional changes: - the name of the option to use a summary string for 'type summary add' has changed from the previous --format-string to the new --summary-string. It is expected that the short option will change from -f to -s, and -s for --python-script will become -o llvm-svn: 137886
2011-08-18 06:13:59 +08:00
ValueObject* realvalobj = NULL; // makes it super-easy to parse pointers
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
bool success = true;
const char *p;
<rdar://problem/13521159> LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down. All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down. llvm-svn: 178191
2013-03-28 07:08:40 +08:00
Log *log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_TYPES));
Add ${ansi.XX} parsing to lldb prompt, use-color setting, and -no-use-colors command line options. settings set use-color [false|true] settings set prompt "${ansi.bold}${ansi.fg.green}(lldb)${ansi.normal} " also "--no-use-colors" on the command prompt llvm-svn: 182609
2013-05-24 04:47:45 +08:00
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
for (p = format; *p != '\0'; ++p)
{
First round of code cleanups: - all instances of "vobj" have been renamed to "valobj" - class Debugger::Formatting has been renamed to DataVisualization (defined in FormatManager.h/cpp) The interface to this class has not changed - FormatCategory now uses ConstString's as keys to the navigators instead of repeatedly casting from ConstString to const char* and back all the time Next step is making the same happen for categories themselves - category gnu-libstdc++ is defined in the constructor for a FormatManager The source code for it is defined in gnu_libstdcpp.py, drawn from examples/synthetic at compile time All references to previous 'osxcpp' name have been removed from both code and file names Functional changes: - the name of the option to use a summary string for 'type summary add' has changed from the previous --format-string to the new --summary-string. It is expected that the short option will change from -f to -s, and -s for --python-script will become -o llvm-svn: 137886
2011-08-18 06:13:59 +08:00
if (realvalobj)
This commit adds a new top subcommand "summary" to command type named "type". Currently this command implements three commands: type summary add <format> <typename1> [<typename2> ...] type summary delete <typename1> [<typename2> ...] type summary list [<typename1> [<typename2>] ...] type summary clear This allows you to specify the default format that will be used to display summaries for variables, shown when you use "frame variable" or "expression", or the SBValue classes. Examples: type summary add "x = ${var.x}" Point type summary list type summary add --one-liner SimpleType llvm-svn: 134108
2011-06-30 06:27:15 +08:00
{
First round of code cleanups: - all instances of "vobj" have been renamed to "valobj" - class Debugger::Formatting has been renamed to DataVisualization (defined in FormatManager.h/cpp) The interface to this class has not changed - FormatCategory now uses ConstString's as keys to the navigators instead of repeatedly casting from ConstString to const char* and back all the time Next step is making the same happen for categories themselves - category gnu-libstdc++ is defined in the constructor for a FormatManager The source code for it is defined in gnu_libstdcpp.py, drawn from examples/synthetic at compile time All references to previous 'osxcpp' name have been removed from both code and file names Functional changes: - the name of the option to use a summary string for 'type summary add' has changed from the previous --format-string to the new --summary-string. It is expected that the short option will change from -f to -s, and -s for --python-script will become -o llvm-svn: 137886
2011-08-18 06:13:59 +08:00
valobj = realvalobj;
realvalobj = NULL;
This commit adds a new top subcommand "summary" to command type named "type". Currently this command implements three commands: type summary add <format> <typename1> [<typename2> ...] type summary delete <typename1> [<typename2> ...] type summary list [<typename1> [<typename2>] ...] type summary clear This allows you to specify the default format that will be used to display summaries for variables, shown when you use "frame variable" or "expression", or the SBValue classes. Examples: type summary add "x = ${var.x}" Point type summary list type summary add --one-liner SimpleType llvm-svn: 134108
2011-06-30 06:27:15 +08:00
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
size_t non_special_chars = ::strcspn (p, "${}\\");
if (non_special_chars > 0)
{
if (success)
s.Write (p, non_special_chars);
p += non_special_chars;
}
if (*p == '\0')
{
break;
}
else if (*p == '{')
{
// Start a new scope that must have everything it needs if it is to
// to make it into the final output stream "s". If you want to make
// a format that only prints out the function or symbol name if there
// is one in the symbol context you can use:
// "{function =${function.name}}"
// The first '{' starts a new scope that end with the matching '}' at
// the end of the string. The contents "function =${function.name}"
// will then be evaluated and only be output if there is a function
// or symbol with a valid name.
StreamString sub_strm;
++p; // Skip the '{'
Add ${ansi.XX} parsing to lldb prompt, use-color setting, and -no-use-colors command line options. settings set use-color [false|true] settings set prompt "${ansi.bold}${ansi.fg.green}(lldb)${ansi.normal} " also "--no-use-colors" on the command prompt llvm-svn: 182609
2013-05-24 04:47:45 +08:00
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
if (FormatPromptRecurse (p, sc, exe_ctx, addr, sub_strm, &p, valobj, function_changed, initial_function))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
// The stream had all it needed
s.Write(sub_strm.GetData(), sub_strm.GetSize());
}
if (*p != '}')
{
success = false;
break;
}
}
else if (*p == '}')
{
// End of a enclosing scope
break;
}
else if (*p == '$')
{
// We have a prompt variable to print
++p;
if (*p == '{')
{
++p;
const char *var_name_begin = p;
const char *var_name_end = ::strchr (p, '}');
if (var_name_end && var_name_begin < var_name_end)
{
// if we have already failed to parse, skip this variable
if (success)
{
const char *cstr = NULL;
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
std::string token_format;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
Address format_addr;
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
// normally "addr" means print a raw address but
// "file-addr-or-load-addr" means print a module + file addr if there's no load addr
bool print_file_addr_or_load_addr = false;
bool addr_offset_concrete_func_only = false;
bool addr_offset_print_with_no_padding = false;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
bool calculate_format_addr_function_offset = false;
// Set reg_kind and reg_num to invalid values
RegisterKind reg_kind = kNumRegisterKinds;
uint32_t reg_num = LLDB_INVALID_REGNUM;
FileSpec format_file_spec;
Fixed the LLDB build so that we can have private types, private enums and public types and public enums. This was done to keep the SWIG stuff from parsing all sorts of enums and types that weren't needed, and allows us to abstract our API better. llvm-svn: 128239
2011-03-25 05:19:54 +08:00
const RegisterInfo *reg_info = NULL;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
RegisterContext *reg_ctx = NULL;
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
bool do_deref_pointer = false;
Massive enumeration name changes: a number of enums in ValueObject were not following the naming pattern Changes to synthetic children: - the update(self): function can now (optionally) return a value - if it returns boolean value True, ValueObjectSyntheticFilter will not clear its caches across stop-points this should allow better performance for Python-based synthetic children when one can be sure that the child ValueObjects have not changed - making a difference between a synthetic VO and a VO with a synthetic value: now a ValueObjectSyntheticFilter will not return itself as its own synthetic value, but will (correctly) claim to itself be synthetic - cleared up the internal synthetic children architecture to make a more consistent use of pointers and references instead of shared pointers when possible - major cleanup of unnecessary #include, data and functions in ValueObjectSyntheticFilter itself - removed the SyntheticValueType enum and replaced it with a plain boolean (to which it was equivalent in the first place) Some clean ups to the summary generation code Centralized the code that clears out user-visible strings and data in ValueObject More efficient summaries for libc++ containers llvm-svn: 153061
2012-03-20 06:58:49 +08:00
ValueObject::ExpressionPathScanEndReason reason_to_stop = ValueObject::eExpressionPathScanEndReasonEndOfString;
ValueObject::ExpressionPathEndResultType final_value_type = ValueObject::eExpressionPathEndResultTypePlain;
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
// Each variable must set success to true below...
bool var_success = false;
switch (var_name_begin[0])
{
This commit adds a new top subcommand "summary" to command type named "type". Currently this command implements three commands: type summary add <format> <typename1> [<typename2> ...] type summary delete <typename1> [<typename2> ...] type summary list [<typename1> [<typename2>] ...] type summary clear This allows you to specify the default format that will be used to display summaries for variables, shown when you use "frame variable" or "expression", or the SBValue classes. Examples: type summary add "x = ${var.x}" Point type summary list type summary add --one-liner SimpleType llvm-svn: 134108
2011-06-30 06:27:15 +08:00
case '*':
case 'v':
Public API changes: - Completely new implementation of SBType - Various enhancements in several other classes Python synthetic children providers for std::vector<T>, std::list<T> and std::map<K,V>: - these return the actual elements into the container as the children of the container - basic template name parsing that works (hopefully) on both Clang and GCC - find them in examples/synthetic and in the test suite in functionalities/data-formatter/data-formatter-python-synth New summary string token ${svar : - the syntax is just the same as in ${var but this new token lets you read the values coming from the synthetic children provider instead of the actual children - Python providers above provide a synthetic child len that returns the number of elements into the container Full bug fix for the issue in which getting byte size for a non-complete type would crash LLDB Several other fixes, including: - inverted the order of arguments in the ClangASTType constructor - EvaluationPoint now only returns SharedPointer's to Target and Process - the help text for several type subcommands now correctly indicates argument-less options as such llvm-svn: 136504
2011-07-30 03:53:35 +08:00
case 's':
This commit adds a new top subcommand "summary" to command type named "type". Currently this command implements three commands: type summary add <format> <typename1> [<typename2> ...] type summary delete <typename1> [<typename2> ...] type summary list [<typename1> [<typename2>] ...] type summary clear This allows you to specify the default format that will be used to display summaries for variables, shown when you use "frame variable" or "expression", or the SBValue classes. Examples: type summary add "x = ${var.x}" Point type summary list type summary add --one-liner SimpleType llvm-svn: 134108
2011-06-30 06:27:15 +08:00
{
First round of code cleanups: - all instances of "vobj" have been renamed to "valobj" - class Debugger::Formatting has been renamed to DataVisualization (defined in FormatManager.h/cpp) The interface to this class has not changed - FormatCategory now uses ConstString's as keys to the navigators instead of repeatedly casting from ConstString to const char* and back all the time Next step is making the same happen for categories themselves - category gnu-libstdc++ is defined in the constructor for a FormatManager The source code for it is defined in gnu_libstdcpp.py, drawn from examples/synthetic at compile time All references to previous 'osxcpp' name have been removed from both code and file names Functional changes: - the name of the option to use a summary string for 'type summary add' has changed from the previous --format-string to the new --summary-string. It is expected that the short option will change from -f to -s, and -s for --python-script will become -o llvm-svn: 137886
2011-08-18 06:13:59 +08:00
if (!valobj)
Public API changes: - Completely new implementation of SBType - Various enhancements in several other classes Python synthetic children providers for std::vector<T>, std::list<T> and std::map<K,V>: - these return the actual elements into the container as the children of the container - basic template name parsing that works (hopefully) on both Clang and GCC - find them in examples/synthetic and in the test suite in functionalities/data-formatter/data-formatter-python-synth New summary string token ${svar : - the syntax is just the same as in ${var but this new token lets you read the values coming from the synthetic children provider instead of the actual children - Python providers above provide a synthetic child len that returns the number of elements into the container Full bug fix for the issue in which getting byte size for a non-complete type would crash LLDB Several other fixes, including: - inverted the order of arguments in the ClangASTType constructor - EvaluationPoint now only returns SharedPointer's to Target and Process - the help text for several type subcommands now correctly indicates argument-less options as such llvm-svn: 136504
2011-07-30 03:53:35 +08:00
break;
Fixed a bug where a variable could not be formatted in a summary if its datatype already had a custom format Fixed a bug where Objective-C variables coming out of the expression parser could crash the Python synthetic providers: - expression parser output has a "frozen data" component, which is a byte-exact copy of the value (in host memory), if trying to read into memory based on the host address, LLDB would crash. we are now passing the correct (target) pointer to the Python code Objective-C "id" variables are now formatted according to their dynamic type, if the -d option to frame variable is used: - Code based on the Objective-C 2.0 runtime is used to obtain this information without running code on the target llvm-svn: 136695
2011-08-03 01:27:39 +08:00
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[Debugger::FormatPrompt] initial string: %s",var_name_begin);
Fixed a bug where a variable could not be formatted in a summary if its datatype already had a custom format Fixed a bug where Objective-C variables coming out of the expression parser could crash the Python synthetic providers: - expression parser output has a "frozen data" component, which is a byte-exact copy of the value (in host memory), if trying to read into memory based on the host address, LLDB would crash. we are now passing the correct (target) pointer to the Python code Objective-C "id" variables are now formatted according to their dynamic type, if the -d option to frame variable is used: - Code based on the Objective-C 2.0 runtime is used to obtain this information without running code on the target llvm-svn: 136695
2011-08-03 01:27:39 +08:00
Public API changes: - Completely new implementation of SBType - Various enhancements in several other classes Python synthetic children providers for std::vector<T>, std::list<T> and std::map<K,V>: - these return the actual elements into the container as the children of the container - basic template name parsing that works (hopefully) on both Clang and GCC - find them in examples/synthetic and in the test suite in functionalities/data-formatter/data-formatter-python-synth New summary string token ${svar : - the syntax is just the same as in ${var but this new token lets you read the values coming from the synthetic children provider instead of the actual children - Python providers above provide a synthetic child len that returns the number of elements into the container Full bug fix for the issue in which getting byte size for a non-complete type would crash LLDB Several other fixes, including: - inverted the order of arguments in the ClangASTType constructor - EvaluationPoint now only returns SharedPointer's to Target and Process - the help text for several type subcommands now correctly indicates argument-less options as such llvm-svn: 136504
2011-07-30 03:53:35 +08:00
// check for *var and *svar
if (*var_name_begin == '*')
{
do_deref_pointer = true;
var_name_begin++;
<rdar://problem/12717717> Modifying our data formatters matching algorithm to ensure that "const X*" is treated as equivalent to "X*" Also, a couple improvements to the "lldb types" logging llvm-svn: 184215
2013-06-19 02:23:07 +08:00
if (log)
log->Printf("[Debugger::FormatPrompt] found a deref, new string is: %s",var_name_begin);
Public API changes: - Completely new implementation of SBType - Various enhancements in several other classes Python synthetic children providers for std::vector<T>, std::list<T> and std::map<K,V>: - these return the actual elements into the container as the children of the container - basic template name parsing that works (hopefully) on both Clang and GCC - find them in examples/synthetic and in the test suite in functionalities/data-formatter/data-formatter-python-synth New summary string token ${svar : - the syntax is just the same as in ${var but this new token lets you read the values coming from the synthetic children provider instead of the actual children - Python providers above provide a synthetic child len that returns the number of elements into the container Full bug fix for the issue in which getting byte size for a non-complete type would crash LLDB Several other fixes, including: - inverted the order of arguments in the ClangASTType constructor - EvaluationPoint now only returns SharedPointer's to Target and Process - the help text for several type subcommands now correctly indicates argument-less options as such llvm-svn: 136504
2011-07-30 03:53:35 +08:00
}
Fixed a bug where a variable could not be formatted in a summary if its datatype already had a custom format Fixed a bug where Objective-C variables coming out of the expression parser could crash the Python synthetic providers: - expression parser output has a "frozen data" component, which is a byte-exact copy of the value (in host memory), if trying to read into memory based on the host address, LLDB would crash. we are now passing the correct (target) pointer to the Python code Objective-C "id" variables are now formatted according to their dynamic type, if the -d option to frame variable is used: - Code based on the Objective-C 2.0 runtime is used to obtain this information without running code on the target llvm-svn: 136695
2011-08-03 01:27:39 +08:00
Public API changes: - Completely new implementation of SBType - Various enhancements in several other classes Python synthetic children providers for std::vector<T>, std::list<T> and std::map<K,V>: - these return the actual elements into the container as the children of the container - basic template name parsing that works (hopefully) on both Clang and GCC - find them in examples/synthetic and in the test suite in functionalities/data-formatter/data-formatter-python-synth New summary string token ${svar : - the syntax is just the same as in ${var but this new token lets you read the values coming from the synthetic children provider instead of the actual children - Python providers above provide a synthetic child len that returns the number of elements into the container Full bug fix for the issue in which getting byte size for a non-complete type would crash LLDB Several other fixes, including: - inverted the order of arguments in the ClangASTType constructor - EvaluationPoint now only returns SharedPointer's to Target and Process - the help text for several type subcommands now correctly indicates argument-less options as such llvm-svn: 136504
2011-07-30 03:53:35 +08:00
if (*var_name_begin == 's')
{
Synthetic values are now automatically enabled and active by default. SBValue is set up to always wrap a synthetic value when one is available. A new setting enable-synthetic-value is provided on the target to disable this behavior. There also is a new GetNonSyntheticValue() API call on SBValue to go back from synthetic to non-synthetic. There is no call to go from non-synthetic to synthetic. The test suite has been changed accordingly. Fallout from changes to type searching: an hack has to be played to make it possible to use maps that contain std::string due to the special name replacement operated by clang Fixing a test case that was using libstdcpp instead of libc++ - caught as a consequence of said changes to type searching llvm-svn: 153495
2012-03-27 10:35:13 +08:00
if (!valobj->IsSynthetic())
valobj = valobj->GetSyntheticValue().get();
Massive enumeration name changes: a number of enums in ValueObject were not following the naming pattern Changes to synthetic children: - the update(self): function can now (optionally) return a value - if it returns boolean value True, ValueObjectSyntheticFilter will not clear its caches across stop-points this should allow better performance for Python-based synthetic children when one can be sure that the child ValueObjects have not changed - making a difference between a synthetic VO and a VO with a synthetic value: now a ValueObjectSyntheticFilter will not return itself as its own synthetic value, but will (correctly) claim to itself be synthetic - cleared up the internal synthetic children architecture to make a more consistent use of pointers and references instead of shared pointers when possible - major cleanup of unnecessary #include, data and functions in ValueObjectSyntheticFilter itself - removed the SyntheticValueType enum and replaced it with a plain boolean (to which it was equivalent in the first place) Some clean ups to the summary generation code Centralized the code that clears out user-visible strings and data in ValueObject More efficient summaries for libc++ containers llvm-svn: 153061
2012-03-20 06:58:49 +08:00
if (!valobj)
break;
Public API changes: - Completely new implementation of SBType - Various enhancements in several other classes Python synthetic children providers for std::vector<T>, std::list<T> and std::map<K,V>: - these return the actual elements into the container as the children of the container - basic template name parsing that works (hopefully) on both Clang and GCC - find them in examples/synthetic and in the test suite in functionalities/data-formatter/data-formatter-python-synth New summary string token ${svar : - the syntax is just the same as in ${var but this new token lets you read the values coming from the synthetic children provider instead of the actual children - Python providers above provide a synthetic child len that returns the number of elements into the container Full bug fix for the issue in which getting byte size for a non-complete type would crash LLDB Several other fixes, including: - inverted the order of arguments in the ClangASTType constructor - EvaluationPoint now only returns SharedPointer's to Target and Process - the help text for several type subcommands now correctly indicates argument-less options as such llvm-svn: 136504
2011-07-30 03:53:35 +08:00
var_name_begin++;
<rdar://problem/12717717> Modifying our data formatters matching algorithm to ensure that "const X*" is treated as equivalent to "X*" Also, a couple improvements to the "lldb types" logging llvm-svn: 184215
2013-06-19 02:23:07 +08:00
if (log)
log->Printf("[Debugger::FormatPrompt] found a synthetic, new string is: %s",var_name_begin);
Public API changes: - Completely new implementation of SBType - Various enhancements in several other classes Python synthetic children providers for std::vector<T>, std::list<T> and std::map<K,V>: - these return the actual elements into the container as the children of the container - basic template name parsing that works (hopefully) on both Clang and GCC - find them in examples/synthetic and in the test suite in functionalities/data-formatter/data-formatter-python-synth New summary string token ${svar : - the syntax is just the same as in ${var but this new token lets you read the values coming from the synthetic children provider instead of the actual children - Python providers above provide a synthetic child len that returns the number of elements into the container Full bug fix for the issue in which getting byte size for a non-complete type would crash LLDB Several other fixes, including: - inverted the order of arguments in the ClangASTType constructor - EvaluationPoint now only returns SharedPointer's to Target and Process - the help text for several type subcommands now correctly indicates argument-less options as such llvm-svn: 136504
2011-07-30 03:53:35 +08:00
}
// should be a 'v' by now
if (*var_name_begin != 'v')
break;
Fixed a bug where a variable could not be formatted in a summary if its datatype already had a custom format Fixed a bug where Objective-C variables coming out of the expression parser could crash the Python synthetic providers: - expression parser output has a "frozen data" component, which is a byte-exact copy of the value (in host memory), if trying to read into memory based on the host address, LLDB would crash. we are now passing the correct (target) pointer to the Python code Objective-C "id" variables are now formatted according to their dynamic type, if the -d option to frame variable is used: - Code based on the Objective-C 2.0 runtime is used to obtain this information without running code on the target llvm-svn: 136695
2011-08-03 01:27:39 +08:00
if (log)
<rdar://problem/12717717> Modifying our data formatters matching algorithm to ensure that "const X*" is treated as equivalent to "X*" Also, a couple improvements to the "lldb types" logging llvm-svn: 184215
2013-06-19 02:23:07 +08:00
log->Printf("[Debugger::FormatPrompt] string I am working with: %s",var_name_begin);
Fixed a bug where a variable could not be formatted in a summary if its datatype already had a custom format Fixed a bug where Objective-C variables coming out of the expression parser could crash the Python synthetic providers: - expression parser output has a "frozen data" component, which is a byte-exact copy of the value (in host memory), if trying to read into memory based on the host address, LLDB would crash. we are now passing the correct (target) pointer to the Python code Objective-C "id" variables are now formatted according to their dynamic type, if the -d option to frame variable is used: - Code based on the Objective-C 2.0 runtime is used to obtain this information without running code on the target llvm-svn: 136695
2011-08-03 01:27:39 +08:00
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
ValueObject::ExpressionPathAftermath what_next = (do_deref_pointer ?
Massive enumeration name changes: a number of enums in ValueObject were not following the naming pattern Changes to synthetic children: - the update(self): function can now (optionally) return a value - if it returns boolean value True, ValueObjectSyntheticFilter will not clear its caches across stop-points this should allow better performance for Python-based synthetic children when one can be sure that the child ValueObjects have not changed - making a difference between a synthetic VO and a VO with a synthetic value: now a ValueObjectSyntheticFilter will not return itself as its own synthetic value, but will (correctly) claim to itself be synthetic - cleared up the internal synthetic children architecture to make a more consistent use of pointers and references instead of shared pointers when possible - major cleanup of unnecessary #include, data and functions in ValueObjectSyntheticFilter itself - removed the SyntheticValueType enum and replaced it with a plain boolean (to which it was equivalent in the first place) Some clean ups to the summary generation code Centralized the code that clears out user-visible strings and data in ValueObject More efficient summaries for libc++ containers llvm-svn: 153061
2012-03-20 06:58:49 +08:00
ValueObject::eExpressionPathAftermathDereference : ValueObject::eExpressionPathAftermathNothing);
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
ValueObject::GetValueForExpressionPathOptions options;
Fixed an issue where a pointer's address was being logged instead of its value Access to synthetic children by name: if your object has a synthetic child named foo you can now type frame variable object.foo (or ->foo if you have a pointer) and that will print the value of the synthetic child (if your object has an actual child named foo, the actual child prevails!) this behavior should also work in summaries, and you should be able to use ${var.foo} and ${svar.foo} interchangeably (but using svar.foo will mask an actual child named foo) llvm-svn: 137314
2011-08-12 01:08:01 +08:00
options.DontCheckDotVsArrowSyntax().DoAllowBitfieldSyntax().DoAllowFragileIVar().DoAllowSyntheticChildren();
Massive enumeration name changes: a number of enums in ValueObject were not following the naming pattern Changes to synthetic children: - the update(self): function can now (optionally) return a value - if it returns boolean value True, ValueObjectSyntheticFilter will not clear its caches across stop-points this should allow better performance for Python-based synthetic children when one can be sure that the child ValueObjects have not changed - making a difference between a synthetic VO and a VO with a synthetic value: now a ValueObjectSyntheticFilter will not return itself as its own synthetic value, but will (correctly) claim to itself be synthetic - cleared up the internal synthetic children architecture to make a more consistent use of pointers and references instead of shared pointers when possible - major cleanup of unnecessary #include, data and functions in ValueObjectSyntheticFilter itself - removed the SyntheticValueType enum and replaced it with a plain boolean (to which it was equivalent in the first place) Some clean ups to the summary generation code Centralized the code that clears out user-visible strings and data in ValueObject More efficient summaries for libc++ containers llvm-svn: 153061
2012-03-20 06:58:49 +08:00
ValueObject::ValueObjectRepresentationStyle val_obj_display = ValueObject::eValueObjectRepresentationStyleSummary;
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
ValueObject* target = NULL;
Adopt the intrusive pointers in: lldb_private::Breakpoint lldb_private::BreakpointLocations lldb_private::BreakpointSite lldb_private::Debugger lldb_private::StackFrame lldb_private::Thread lldb_private::Target llvm-svn: 139985
2011-09-17 16:33:22 +08:00
Format custom_format = eFormatInvalid;
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
const char* var_name_final = NULL;
const char* var_name_final_if_array_range = NULL;
const char* close_bracket_position = NULL;
int64_t index_lower = -1;
int64_t index_higher = -1;
bool is_array_range = false;
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
const char* first_unparsed;
Second round of code cleanups: - reorganizing classes layout to have public part first Typedefs that we want to keep private, but must be defined for some public code to work correctly are an exception - avoiding methods in the form T foo() { code; } all on one-line - moving method implementations from .h to .cpp whenever feasible Templatized code is an exception and so are very small methods - generally, adhering to coding conventions followed project-wide Functional changes: - fixed an issue where using ${var} in a summary for an aggregate, and then displaying a pointer-to-aggregate would lead to no summary being displayed The issue was not a major one because all ${var} was meant to do in that context was display an error for invalid use of pointer Accordingly fixed test cases and added a new test case llvm-svn: 137944
2011-08-19 00:38:26 +08:00
bool was_plain_var = false;
bool was_var_format = false;
<rdar://problem/11338654> Fixing a bug where having a summary for a bitfield without a format specified would in certain cases crash LLDB - This has also led to refactoring the by-type accessors for the data formatter subsystem. These now belong in our internal layer, and are just invoked by the public API stratum llvm-svn: 156429
2012-05-09 05:49:57 +08:00
bool was_var_indexed = false;
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
First round of code cleanups: - all instances of "vobj" have been renamed to "valobj" - class Debugger::Formatting has been renamed to DataVisualization (defined in FormatManager.h/cpp) The interface to this class has not changed - FormatCategory now uses ConstString's as keys to the navigators instead of repeatedly casting from ConstString to const char* and back all the time Next step is making the same happen for categories themselves - category gnu-libstdc++ is defined in the constructor for a FormatManager The source code for it is defined in gnu_libstdcpp.py, drawn from examples/synthetic at compile time All references to previous 'osxcpp' name have been removed from both code and file names Functional changes: - the name of the option to use a summary string for 'type summary add' has changed from the previous --format-string to the new --summary-string. It is expected that the short option will change from -f to -s, and -s for --python-script will become -o llvm-svn: 137886
2011-08-18 06:13:59 +08:00
if (!valobj) break;
// simplest case ${var}, just print valobj's value
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "var}"))
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
{
Second round of code cleanups: - reorganizing classes layout to have public part first Typedefs that we want to keep private, but must be defined for some public code to work correctly are an exception - avoiding methods in the form T foo() { code; } all on one-line - moving method implementations from .h to .cpp whenever feasible Templatized code is an exception and so are very small methods - generally, adhering to coding conventions followed project-wide Functional changes: - fixed an issue where using ${var} in a summary for an aggregate, and then displaying a pointer-to-aggregate would lead to no summary being displayed The issue was not a major one because all ${var} was meant to do in that context was display an error for invalid use of pointer Accordingly fixed test cases and added a new test case llvm-svn: 137944
2011-08-19 00:38:26 +08:00
was_plain_var = true;
First round of code cleanups: - all instances of "vobj" have been renamed to "valobj" - class Debugger::Formatting has been renamed to DataVisualization (defined in FormatManager.h/cpp) The interface to this class has not changed - FormatCategory now uses ConstString's as keys to the navigators instead of repeatedly casting from ConstString to const char* and back all the time Next step is making the same happen for categories themselves - category gnu-libstdc++ is defined in the constructor for a FormatManager The source code for it is defined in gnu_libstdcpp.py, drawn from examples/synthetic at compile time All references to previous 'osxcpp' name have been removed from both code and file names Functional changes: - the name of the option to use a summary string for 'type summary add' has changed from the previous --format-string to the new --summary-string. It is expected that the short option will change from -f to -s, and -s for --python-script will become -o llvm-svn: 137886
2011-08-18 06:13:59 +08:00
target = valobj;
Massive enumeration name changes: a number of enums in ValueObject were not following the naming pattern Changes to synthetic children: - the update(self): function can now (optionally) return a value - if it returns boolean value True, ValueObjectSyntheticFilter will not clear its caches across stop-points this should allow better performance for Python-based synthetic children when one can be sure that the child ValueObjects have not changed - making a difference between a synthetic VO and a VO with a synthetic value: now a ValueObjectSyntheticFilter will not return itself as its own synthetic value, but will (correctly) claim to itself be synthetic - cleared up the internal synthetic children architecture to make a more consistent use of pointers and references instead of shared pointers when possible - major cleanup of unnecessary #include, data and functions in ValueObjectSyntheticFilter itself - removed the SyntheticValueType enum and replaced it with a plain boolean (to which it was equivalent in the first place) Some clean ups to the summary generation code Centralized the code that clears out user-visible strings and data in ValueObject More efficient summaries for libc++ containers llvm-svn: 153061
2012-03-20 06:58:49 +08:00
val_obj_display = ValueObject::eValueObjectRepresentationStyleValue;
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin,"var%"))
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
{
Second round of code cleanups: - reorganizing classes layout to have public part first Typedefs that we want to keep private, but must be defined for some public code to work correctly are an exception - avoiding methods in the form T foo() { code; } all on one-line - moving method implementations from .h to .cpp whenever feasible Templatized code is an exception and so are very small methods - generally, adhering to coding conventions followed project-wide Functional changes: - fixed an issue where using ${var} in a summary for an aggregate, and then displaying a pointer-to-aggregate would lead to no summary being displayed The issue was not a major one because all ${var} was meant to do in that context was display an error for invalid use of pointer Accordingly fixed test cases and added a new test case llvm-svn: 137944
2011-08-19 00:38:26 +08:00
was_var_format = true;
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
// this is a variable with some custom format applied to it
const char* percent_position;
First round of code cleanups: - all instances of "vobj" have been renamed to "valobj" - class Debugger::Formatting has been renamed to DataVisualization (defined in FormatManager.h/cpp) The interface to this class has not changed - FormatCategory now uses ConstString's as keys to the navigators instead of repeatedly casting from ConstString to const char* and back all the time Next step is making the same happen for categories themselves - category gnu-libstdc++ is defined in the constructor for a FormatManager The source code for it is defined in gnu_libstdcpp.py, drawn from examples/synthetic at compile time All references to previous 'osxcpp' name have been removed from both code and file names Functional changes: - the name of the option to use a summary string for 'type summary add' has changed from the previous --format-string to the new --summary-string. It is expected that the short option will change from -f to -s, and -s for --python-script will become -o llvm-svn: 137886
2011-08-18 06:13:59 +08:00
target = valobj;
Massive enumeration name changes: a number of enums in ValueObject were not following the naming pattern Changes to synthetic children: - the update(self): function can now (optionally) return a value - if it returns boolean value True, ValueObjectSyntheticFilter will not clear its caches across stop-points this should allow better performance for Python-based synthetic children when one can be sure that the child ValueObjects have not changed - making a difference between a synthetic VO and a VO with a synthetic value: now a ValueObjectSyntheticFilter will not return itself as its own synthetic value, but will (correctly) claim to itself be synthetic - cleared up the internal synthetic children architecture to make a more consistent use of pointers and references instead of shared pointers when possible - major cleanup of unnecessary #include, data and functions in ValueObjectSyntheticFilter itself - removed the SyntheticValueType enum and replaced it with a plain boolean (to which it was equivalent in the first place) Some clean ups to the summary generation code Centralized the code that clears out user-visible strings and data in ValueObject More efficient summaries for libc++ containers llvm-svn: 153061
2012-03-20 06:58:49 +08:00
val_obj_display = ValueObject::eValueObjectRepresentationStyleValue;
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
ScanFormatDescriptor (var_name_begin,
var_name_end,
&var_name_final,
&percent_position,
&custom_format,
&val_obj_display);
}
// this is ${var.something} or multiple .something nested
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "var"))
This commit adds a new top subcommand "summary" to command type named "type". Currently this command implements three commands: type summary add <format> <typename1> [<typename2> ...] type summary delete <typename1> [<typename2> ...] type summary list [<typename1> [<typename2>] ...] type summary clear This allows you to specify the default format that will be used to display summaries for variables, shown when you use "frame variable" or "expression", or the SBValue classes. Examples: type summary add "x = ${var.x}" Point type summary list type summary add --one-liner SimpleType llvm-svn: 134108
2011-06-30 06:27:15 +08:00
{
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "var["))
<rdar://problem/11338654> Fixing a bug where having a summary for a bitfield without a format specified would in certain cases crash LLDB - This has also led to refactoring the by-type accessors for the data formatter subsystem. These now belong in our internal layer, and are just invoked by the public API stratum llvm-svn: 156429
2012-05-09 05:49:57 +08:00
was_var_indexed = true;
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
const char* percent_position;
ScanFormatDescriptor (var_name_begin,
var_name_end,
&var_name_final,
&percent_position,
&custom_format,
&val_obj_display);
const char* open_bracket_position;
const char* separator_position;
ScanBracketedRange (var_name_begin,
var_name_end,
var_name_final,
&open_bracket_position,
&separator_position,
&close_bracket_position,
&var_name_final_if_array_range,
&index_lower,
&index_higher);
Error error;
Moving from std::auto_ptr<char> to std::string for simple string memory management. It is better practice and, also, it is not clear whether std::auto_ptr<> is smart enough to know about delete[] vs. delete llvm-svn: 174236
2013-02-02 07:59:44 +08:00
std::string expr_path(var_name_final-var_name_begin-1,0);
memcpy(&expr_path[0], var_name_begin+3,var_name_final-var_name_begin-3);
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
Moving from std::auto_ptr<char> to std::string for simple string memory management. It is better practice and, also, it is not clear whether std::auto_ptr<> is smart enough to know about delete[] vs. delete llvm-svn: 174236
2013-02-02 07:59:44 +08:00
log->Printf("[Debugger::FormatPrompt] symbol to expand: %s",expr_path.c_str());
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
Moving from std::auto_ptr<char> to std::string for simple string memory management. It is better practice and, also, it is not clear whether std::auto_ptr<> is smart enough to know about delete[] vs. delete llvm-svn: 174236
2013-02-02 07:59:44 +08:00
target = valobj->GetValueForExpressionPath(expr_path.c_str(),
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
&first_unparsed,
&reason_to_stop,
&final_value_type,
options,
&what_next).get();
if (!target)
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
{
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[Debugger::FormatPrompt] ERROR: unparsed portion = %s, why stopping = %d,"
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
" final_value_type %d",
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
first_unparsed, reason_to_stop, final_value_type);
break;
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
}
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
else
{
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[Debugger::FormatPrompt] ALL RIGHT: unparsed portion = %s, why stopping = %d,"
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
" final_value_type %d",
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
first_unparsed, reason_to_stop, final_value_type);
Fix a problem where summary strings could not use a synthetically generated value as part of themselves llvm-svn: 220414
2014-10-23 04:14:09 +08:00
target = target->GetQualifiedRepresentationIfAvailable(target->GetDynamicValueType(), true).get();
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
}
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
}
else
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
break;
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
Massive enumeration name changes: a number of enums in ValueObject were not following the naming pattern Changes to synthetic children: - the update(self): function can now (optionally) return a value - if it returns boolean value True, ValueObjectSyntheticFilter will not clear its caches across stop-points this should allow better performance for Python-based synthetic children when one can be sure that the child ValueObjects have not changed - making a difference between a synthetic VO and a VO with a synthetic value: now a ValueObjectSyntheticFilter will not return itself as its own synthetic value, but will (correctly) claim to itself be synthetic - cleared up the internal synthetic children architecture to make a more consistent use of pointers and references instead of shared pointers when possible - major cleanup of unnecessary #include, data and functions in ValueObjectSyntheticFilter itself - removed the SyntheticValueType enum and replaced it with a plain boolean (to which it was equivalent in the first place) Some clean ups to the summary generation code Centralized the code that clears out user-visible strings and data in ValueObject More efficient summaries for libc++ containers llvm-svn: 153061
2012-03-20 06:58:49 +08:00
is_array_range = (final_value_type == ValueObject::eExpressionPathEndResultTypeBoundedRange ||
final_value_type == ValueObject::eExpressionPathEndResultTypeUnboundedRange);
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
Massive enumeration name changes: a number of enums in ValueObject were not following the naming pattern Changes to synthetic children: - the update(self): function can now (optionally) return a value - if it returns boolean value True, ValueObjectSyntheticFilter will not clear its caches across stop-points this should allow better performance for Python-based synthetic children when one can be sure that the child ValueObjects have not changed - making a difference between a synthetic VO and a VO with a synthetic value: now a ValueObjectSyntheticFilter will not return itself as its own synthetic value, but will (correctly) claim to itself be synthetic - cleared up the internal synthetic children architecture to make a more consistent use of pointers and references instead of shared pointers when possible - major cleanup of unnecessary #include, data and functions in ValueObjectSyntheticFilter itself - removed the SyntheticValueType enum and replaced it with a plain boolean (to which it was equivalent in the first place) Some clean ups to the summary generation code Centralized the code that clears out user-visible strings and data in ValueObject More efficient summaries for libc++ containers llvm-svn: 153061
2012-03-20 06:58:49 +08:00
do_deref_pointer = (what_next == ValueObject::eExpressionPathAftermathDereference);
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
bug fix in summary strings: - ${*var[].something} was not working as expected options -p and -r now also work for type format add llvm-svn: 134523
2011-07-07 03:27:11 +08:00
if (do_deref_pointer && !is_array_range)
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
{
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
// I have not deref-ed yet, let's do it
// this happens when we are not going through GetValueForVariableExpressionPath
// to get to the target ValueObject
Error error;
target = target->Dereference(error).get();
Additional code cleanups ; Short option name for --python-script in type summary add moved from -s to -o (this is a preliminary step in moving the short option for --summary-string from -f to -s) ; Accordingly updated the test suite llvm-svn: 138315
2011-08-23 08:32:52 +08:00
if (error.Fail())
{
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[Debugger::FormatPrompt] ERROR: %s\n", error.AsCString("unknown")); \
Additional code cleanups ; Short option name for --python-script in type summary add moved from -s to -o (this is a preliminary step in moving the short option for --summary-string from -f to -s) ; Accordingly updated the test suite llvm-svn: 138315
2011-08-23 08:32:52 +08:00
break;
}
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
do_deref_pointer = false;
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
}
smarter summary strings: - formats %s %char[] %c and %a now work to print 0-terminated c-strings if they are applied to a char* or char[] even without the [] operator (e.g. ${var%s}) - array formats (char[], intN[], ..) now work when applied to an array of a scalar type even without the [] operator (e.g. ${var%int32_t[]}) LLDB will not crash because of endless loop when trying to obtain a summary for an object that has no value and references itself in its summary string In many cases, a wrong summary string will now display an "<error>" message instead of giving out an empty string llvm-svn: 135007
2011-07-13 06:56:10 +08:00
After doing all the work to compute the target ValueObject we want to evaluate, make sure we actually got something before proceeding. <rdar://problem/16282875> llvm-svn: 203591
2014-03-12 02:17:23 +08:00
if (!target)
{
if (log)
log->Printf("[Debugger::FormatPrompt] could not calculate target for prompt expression");
break;
}
<rdar://problem/11338654> Fixing a bug where having a summary for a bitfield without a format specified would in certain cases crash LLDB - This has also led to refactoring the by-type accessors for the data formatter subsystem. These now belong in our internal layer, and are just invoked by the public API stratum llvm-svn: 156429
2012-05-09 05:49:57 +08:00
// we do not want to use the summary for a bitfield of type T:n
// if we were originally dealing with just a T - that would get
// us into an endless recursion
if (target->IsBitfield() && was_var_indexed)
{
// TODO: check for a (T:n)-specific summary - we should still obey that
StreamString bitfield_name;
bitfield_name.Printf("%s:%d", target->GetTypeName().AsCString(), target->GetBitfieldBitSize());
lldb::TypeNameSpecifierImplSP type_sp(new TypeNameSpecifierImpl(bitfield_name.GetData(),false));
if (!DataVisualization::GetSummaryForType(type_sp))
val_obj_display = ValueObject::eValueObjectRepresentationStyleValue;
}
Second round of code cleanups: - reorganizing classes layout to have public part first Typedefs that we want to keep private, but must be defined for some public code to work correctly are an exception - avoiding methods in the form T foo() { code; } all on one-line - moving method implementations from .h to .cpp whenever feasible Templatized code is an exception and so are very small methods - generally, adhering to coding conventions followed project-wide Functional changes: - fixed an issue where using ${var} in a summary for an aggregate, and then displaying a pointer-to-aggregate would lead to no summary being displayed The issue was not a major one because all ${var} was meant to do in that context was display an error for invalid use of pointer Accordingly fixed test cases and added a new test case llvm-svn: 137944
2011-08-19 00:38:26 +08:00
// TODO use flags for these
Huge change to clean up types. A long time ago we start with clang types that were created by the symbol files and there were many functions in lldb_private::ClangASTContext that helped. Later we create ClangASTType which contains a clang::ASTContext and an opauque QualType, but we didn't switch over to fully using it. There were a lot of places where we would pass around a raw clang_type_t and also pass along a clang::ASTContext separately. This left room for error. This checkin change all type code over to use ClangASTType everywhere and I cleaned up the interfaces quite a bit. Any code that was in ClangASTContext that was type related, was moved over into ClangASTType. All code that used these types was switched over to use all of the new goodness. llvm-svn: 186130
2013-07-12 06:46:58 +08:00
const uint32_t type_info_flags = target->GetClangType().GetTypeInfo(NULL);
Expose the type-info flags at the public API layer. These flags provide much more informational content to consumers of the LLDB API than the existing TypeClass. Part of the fix for rdar://18517593 llvm-svn: 220322
2014-10-22 04:52:14 +08:00
bool is_array = (type_info_flags & eTypeIsArray) != 0;
bool is_pointer = (type_info_flags & eTypeIsPointer) != 0;
Huge change to clean up types. A long time ago we start with clang types that were created by the symbol files and there were many functions in lldb_private::ClangASTContext that helped. Later we create ClangASTType which contains a clang::ASTContext and an opauque QualType, but we didn't switch over to fully using it. There were a lot of places where we would pass around a raw clang_type_t and also pass along a clang::ASTContext separately. This left room for error. This checkin change all type code over to use ClangASTType everywhere and I cleaned up the interfaces quite a bit. Any code that was in ClangASTContext that was type related, was moved over into ClangASTType. All code that used these types was switched over to use all of the new goodness. llvm-svn: 186130
2013-07-12 06:46:58 +08:00
bool is_aggregate = target->GetClangType().IsAggregateType();
smarter summary strings: - formats %s %char[] %c and %a now work to print 0-terminated c-strings if they are applied to a char* or char[] even without the [] operator (e.g. ${var%s}) - array formats (char[], intN[], ..) now work when applied to an array of a scalar type even without the [] operator (e.g. ${var%int32_t[]}) LLDB will not crash because of endless loop when trying to obtain a summary for an object that has no value and references itself in its summary string In many cases, a wrong summary string will now display an "<error>" message instead of giving out an empty string llvm-svn: 135007
2011-07-13 06:56:10 +08:00
Massive enumeration name changes: a number of enums in ValueObject were not following the naming pattern Changes to synthetic children: - the update(self): function can now (optionally) return a value - if it returns boolean value True, ValueObjectSyntheticFilter will not clear its caches across stop-points this should allow better performance for Python-based synthetic children when one can be sure that the child ValueObjects have not changed - making a difference between a synthetic VO and a VO with a synthetic value: now a ValueObjectSyntheticFilter will not return itself as its own synthetic value, but will (correctly) claim to itself be synthetic - cleared up the internal synthetic children architecture to make a more consistent use of pointers and references instead of shared pointers when possible - major cleanup of unnecessary #include, data and functions in ValueObjectSyntheticFilter itself - removed the SyntheticValueType enum and replaced it with a plain boolean (to which it was equivalent in the first place) Some clean ups to the summary generation code Centralized the code that clears out user-visible strings and data in ValueObject More efficient summaries for libc++ containers llvm-svn: 153061
2012-03-20 06:58:49 +08:00
if ((is_array || is_pointer) && (!is_array_range) && val_obj_display == ValueObject::eValueObjectRepresentationStyleValue) // this should be wrong, but there are some exceptions
smarter summary strings: - formats %s %char[] %c and %a now work to print 0-terminated c-strings if they are applied to a char* or char[] even without the [] operator (e.g. ${var%s}) - array formats (char[], intN[], ..) now work when applied to an array of a scalar type even without the [] operator (e.g. ${var%int32_t[]}) LLDB will not crash because of endless loop when trying to obtain a summary for an object that has no value and references itself in its summary string In many cases, a wrong summary string will now display an "<error>" message instead of giving out an empty string llvm-svn: 135007
2011-07-13 06:56:10 +08:00
{
Second round of code cleanups: - reorganizing classes layout to have public part first Typedefs that we want to keep private, but must be defined for some public code to work correctly are an exception - avoiding methods in the form T foo() { code; } all on one-line - moving method implementations from .h to .cpp whenever feasible Templatized code is an exception and so are very small methods - generally, adhering to coding conventions followed project-wide Functional changes: - fixed an issue where using ${var} in a summary for an aggregate, and then displaying a pointer-to-aggregate would lead to no summary being displayed The issue was not a major one because all ${var} was meant to do in that context was display an error for invalid use of pointer Accordingly fixed test cases and added a new test case llvm-svn: 137944
2011-08-19 00:38:26 +08:00
StreamString str_temp;
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[Debugger::FormatPrompt] I am into array || pointer && !range");
- Now using ${var} as the summary for an aggregate type will produce "name-of-type @ object-location" instead of giving an error e.g. you may get "foo_class @ 0x123456" when typing "type summary add -f ${var} foo_class" - Added a new special formatting token %T for summaries. This shows the type of the object. Using it, the new "type @ location" summary could be manually generated by writing ${var%T} @ ${var%L} - Bits and pieces required to support "frame variable array[n-m]" The feature is not enabled yet because some additional design and support code is required, but the basics are getting there - Fixed a potential issue where a ValueObjectSyntheticFilter was not holding on to its SyntheticChildrenSP Because of the way VOSF are being built now, this has never been an actual issue, but it is still sensible for a VOSF to hold on to the SyntheticChildrenSP as well as to its FrontEnd llvm-svn: 138080
2011-08-20 05:13:46 +08:00
<rdar://problem/13498879> C String summary is emitting "<invalid usage of pointer value as object>" for bad pointers. Now it doesn't emit anything. llvm-svn: 177913
2013-03-26 05:06:13 +08:00
if (target->HasSpecialPrintableRepresentation(val_obj_display, custom_format))
Second round of code cleanups: - reorganizing classes layout to have public part first Typedefs that we want to keep private, but must be defined for some public code to work correctly are an exception - avoiding methods in the form T foo() { code; } all on one-line - moving method implementations from .h to .cpp whenever feasible Templatized code is an exception and so are very small methods - generally, adhering to coding conventions followed project-wide Functional changes: - fixed an issue where using ${var} in a summary for an aggregate, and then displaying a pointer-to-aggregate would lead to no summary being displayed The issue was not a major one because all ${var} was meant to do in that context was display an error for invalid use of pointer Accordingly fixed test cases and added a new test case llvm-svn: 137944
2011-08-19 00:38:26 +08:00
{
- Now using ${var} as the summary for an aggregate type will produce "name-of-type @ object-location" instead of giving an error e.g. you may get "foo_class @ 0x123456" when typing "type summary add -f ${var} foo_class" - Added a new special formatting token %T for summaries. This shows the type of the object. Using it, the new "type @ location" summary could be manually generated by writing ${var%T} @ ${var%L} - Bits and pieces required to support "frame variable array[n-m]" The feature is not enabled yet because some additional design and support code is required, but the basics are getting there - Fixed a potential issue where a ValueObjectSyntheticFilter was not holding on to its SyntheticChildrenSP Because of the way VOSF are being built now, this has never been an actual issue, but it is still sensible for a VOSF to hold on to the SyntheticChildrenSP as well as to its FrontEnd llvm-svn: 138080
2011-08-20 05:13:46 +08:00
// try to use the special cases
var_success = target->DumpPrintableRepresentation(str_temp,
val_obj_display,
custom_format);
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[Debugger::FormatPrompt] special cases did%s match", var_success ? "" : "n't");
- Now using ${var} as the summary for an aggregate type will produce "name-of-type @ object-location" instead of giving an error e.g. you may get "foo_class @ 0x123456" when typing "type summary add -f ${var} foo_class" - Added a new special formatting token %T for summaries. This shows the type of the object. Using it, the new "type @ location" summary could be manually generated by writing ${var%T} @ ${var%L} - Bits and pieces required to support "frame variable array[n-m]" The feature is not enabled yet because some additional design and support code is required, but the basics are getting there - Fixed a potential issue where a ValueObjectSyntheticFilter was not holding on to its SyntheticChildrenSP Because of the way VOSF are being built now, this has never been an actual issue, but it is still sensible for a VOSF to hold on to the SyntheticChildrenSP as well as to its FrontEnd llvm-svn: 138080
2011-08-20 05:13:46 +08:00
// should not happen
<rdar://problem/13498879> C String summary is emitting "<invalid usage of pointer value as object>" for bad pointers. Now it doesn't emit anything. llvm-svn: 177913
2013-03-26 05:06:13 +08:00
if (var_success)
- Now using ${var} as the summary for an aggregate type will produce "name-of-type @ object-location" instead of giving an error e.g. you may get "foo_class @ 0x123456" when typing "type summary add -f ${var} foo_class" - Added a new special formatting token %T for summaries. This shows the type of the object. Using it, the new "type @ location" summary could be manually generated by writing ${var%T} @ ${var%L} - Bits and pieces required to support "frame variable array[n-m]" The feature is not enabled yet because some additional design and support code is required, but the basics are getting there - Fixed a potential issue where a ValueObjectSyntheticFilter was not holding on to its SyntheticChildrenSP Because of the way VOSF are being built now, this has never been an actual issue, but it is still sensible for a VOSF to hold on to the SyntheticChildrenSP as well as to its FrontEnd llvm-svn: 138080
2011-08-20 05:13:46 +08:00
s << str_temp.GetData();
Second round of code cleanups: - reorganizing classes layout to have public part first Typedefs that we want to keep private, but must be defined for some public code to work correctly are an exception - avoiding methods in the form T foo() { code; } all on one-line - moving method implementations from .h to .cpp whenever feasible Templatized code is an exception and so are very small methods - generally, adhering to coding conventions followed project-wide Functional changes: - fixed an issue where using ${var} in a summary for an aggregate, and then displaying a pointer-to-aggregate would lead to no summary being displayed The issue was not a major one because all ${var} was meant to do in that context was display an error for invalid use of pointer Accordingly fixed test cases and added a new test case llvm-svn: 137944
2011-08-19 00:38:26 +08:00
var_success = true;
- Now using ${var} as the summary for an aggregate type will produce "name-of-type @ object-location" instead of giving an error e.g. you may get "foo_class @ 0x123456" when typing "type summary add -f ${var} foo_class" - Added a new special formatting token %T for summaries. This shows the type of the object. Using it, the new "type @ location" summary could be manually generated by writing ${var%T} @ ${var%L} - Bits and pieces required to support "frame variable array[n-m]" The feature is not enabled yet because some additional design and support code is required, but the basics are getting there - Fixed a potential issue where a ValueObjectSyntheticFilter was not holding on to its SyntheticChildrenSP Because of the way VOSF are being built now, this has never been an actual issue, but it is still sensible for a VOSF to hold on to the SyntheticChildrenSP as well as to its FrontEnd llvm-svn: 138080
2011-08-20 05:13:46 +08:00
break;
Second round of code cleanups: - reorganizing classes layout to have public part first Typedefs that we want to keep private, but must be defined for some public code to work correctly are an exception - avoiding methods in the form T foo() { code; } all on one-line - moving method implementations from .h to .cpp whenever feasible Templatized code is an exception and so are very small methods - generally, adhering to coding conventions followed project-wide Functional changes: - fixed an issue where using ${var} in a summary for an aggregate, and then displaying a pointer-to-aggregate would lead to no summary being displayed The issue was not a major one because all ${var} was meant to do in that context was display an error for invalid use of pointer Accordingly fixed test cases and added a new test case llvm-svn: 137944
2011-08-19 00:38:26 +08:00
}
else
- Now using ${var} as the summary for an aggregate type will produce "name-of-type @ object-location" instead of giving an error e.g. you may get "foo_class @ 0x123456" when typing "type summary add -f ${var} foo_class" - Added a new special formatting token %T for summaries. This shows the type of the object. Using it, the new "type @ location" summary could be manually generated by writing ${var%T} @ ${var%L} - Bits and pieces required to support "frame variable array[n-m]" The feature is not enabled yet because some additional design and support code is required, but the basics are getting there - Fixed a potential issue where a ValueObjectSyntheticFilter was not holding on to its SyntheticChildrenSP Because of the way VOSF are being built now, this has never been an actual issue, but it is still sensible for a VOSF to hold on to the SyntheticChildrenSP as well as to its FrontEnd llvm-svn: 138080
2011-08-20 05:13:46 +08:00
{
Improved the user-friendliness of errors shown by the summary feature in certain areas Renamed format "signed decimal" to be "decimal". "unsigned decimal" remains unchanged: - the name "signed decimal" was interfering with symbol %S (use summary) in summary strings. because of the way summary strings are implemented, this did not really lead to a bug, but simply to performing more steps than necessary to display a summary. this is fixed. Documentation improvements (more on synthetic children, some information on filters). This is still a WIP. llvm-svn: 138384
2011-08-24 05:26:09 +08:00
if (was_plain_var) // if ${var}
- Now using ${var} as the summary for an aggregate type will produce "name-of-type @ object-location" instead of giving an error e.g. you may get "foo_class @ 0x123456" when typing "type summary add -f ${var} foo_class" - Added a new special formatting token %T for summaries. This shows the type of the object. Using it, the new "type @ location" summary could be manually generated by writing ${var%T} @ ${var%L} - Bits and pieces required to support "frame variable array[n-m]" The feature is not enabled yet because some additional design and support code is required, but the basics are getting there - Fixed a potential issue where a ValueObjectSyntheticFilter was not holding on to its SyntheticChildrenSP Because of the way VOSF are being built now, this has never been an actual issue, but it is still sensible for a VOSF to hold on to the SyntheticChildrenSP as well as to its FrontEnd llvm-svn: 138080
2011-08-20 05:13:46 +08:00
{
s << target->GetTypeName() << " @ " << target->GetLocationAsCString();
}
Improved the user-friendliness of errors shown by the summary feature in certain areas Renamed format "signed decimal" to be "decimal". "unsigned decimal" remains unchanged: - the name "signed decimal" was interfering with symbol %S (use summary) in summary strings. because of the way summary strings are implemented, this did not really lead to a bug, but simply to performing more steps than necessary to display a summary. this is fixed. Documentation improvements (more on synthetic children, some information on filters). This is still a WIP. llvm-svn: 138384
2011-08-24 05:26:09 +08:00
else if (is_pointer) // if pointer, value is the address stored
{
Ran the static analyzer on the codebase and found a few things. llvm-svn: 160338
2012-07-17 11:23:13 +08:00
target->DumpPrintableRepresentation (s,
val_obj_display,
custom_format,
ValueObject::ePrintableRepresentationSpecialCasesDisable);
Improved the user-friendliness of errors shown by the summary feature in certain areas Renamed format "signed decimal" to be "decimal". "unsigned decimal" remains unchanged: - the name "signed decimal" was interfering with symbol %S (use summary) in summary strings. because of the way summary strings are implemented, this did not really lead to a bug, but simply to performing more steps than necessary to display a summary. this is fixed. Documentation improvements (more on synthetic children, some information on filters). This is still a WIP. llvm-svn: 138384
2011-08-24 05:26:09 +08:00
}
- Now using ${var} as the summary for an aggregate type will produce "name-of-type @ object-location" instead of giving an error e.g. you may get "foo_class @ 0x123456" when typing "type summary add -f ${var} foo_class" - Added a new special formatting token %T for summaries. This shows the type of the object. Using it, the new "type @ location" summary could be manually generated by writing ${var%T} @ ${var%L} - Bits and pieces required to support "frame variable array[n-m]" The feature is not enabled yet because some additional design and support code is required, but the basics are getting there - Fixed a potential issue where a ValueObjectSyntheticFilter was not holding on to its SyntheticChildrenSP Because of the way VOSF are being built now, this has never been an actual issue, but it is still sensible for a VOSF to hold on to the SyntheticChildrenSP as well as to its FrontEnd llvm-svn: 138080
2011-08-20 05:13:46 +08:00
var_success = true;
break;
}
}
// if directly trying to print ${var}, and this is an aggregate, display a nice
// type @ location message
if (is_aggregate && was_plain_var)
{
s << target->GetTypeName() << " @ " << target->GetLocationAsCString();
var_success = true;
Second round of code cleanups: - reorganizing classes layout to have public part first Typedefs that we want to keep private, but must be defined for some public code to work correctly are an exception - avoiding methods in the form T foo() { code; } all on one-line - moving method implementations from .h to .cpp whenever feasible Templatized code is an exception and so are very small methods - generally, adhering to coding conventions followed project-wide Functional changes: - fixed an issue where using ${var} in a summary for an aggregate, and then displaying a pointer-to-aggregate would lead to no summary being displayed The issue was not a major one because all ${var} was meant to do in that context was display an error for invalid use of pointer Accordingly fixed test cases and added a new test case llvm-svn: 137944
2011-08-19 00:38:26 +08:00
break;
}
- Now using ${var} as the summary for an aggregate type will produce "name-of-type @ object-location" instead of giving an error e.g. you may get "foo_class @ 0x123456" when typing "type summary add -f ${var} foo_class" - Added a new special formatting token %T for summaries. This shows the type of the object. Using it, the new "type @ location" summary could be manually generated by writing ${var%T} @ ${var%L} - Bits and pieces required to support "frame variable array[n-m]" The feature is not enabled yet because some additional design and support code is required, but the basics are getting there - Fixed a potential issue where a ValueObjectSyntheticFilter was not holding on to its SyntheticChildrenSP Because of the way VOSF are being built now, this has never been an actual issue, but it is still sensible for a VOSF to hold on to the SyntheticChildrenSP as well as to its FrontEnd llvm-svn: 138080
2011-08-20 05:13:46 +08:00
// if directly trying to print ${var%V}, and this is an aggregate, do not let the user do it
Massive enumeration name changes: a number of enums in ValueObject were not following the naming pattern Changes to synthetic children: - the update(self): function can now (optionally) return a value - if it returns boolean value True, ValueObjectSyntheticFilter will not clear its caches across stop-points this should allow better performance for Python-based synthetic children when one can be sure that the child ValueObjects have not changed - making a difference between a synthetic VO and a VO with a synthetic value: now a ValueObjectSyntheticFilter will not return itself as its own synthetic value, but will (correctly) claim to itself be synthetic - cleared up the internal synthetic children architecture to make a more consistent use of pointers and references instead of shared pointers when possible - major cleanup of unnecessary #include, data and functions in ValueObjectSyntheticFilter itself - removed the SyntheticValueType enum and replaced it with a plain boolean (to which it was equivalent in the first place) Some clean ups to the summary generation code Centralized the code that clears out user-visible strings and data in ValueObject More efficient summaries for libc++ containers llvm-svn: 153061
2012-03-20 06:58:49 +08:00
if (is_aggregate && ((was_var_format && val_obj_display == ValueObject::eValueObjectRepresentationStyleValue)))
Second round of code cleanups: - reorganizing classes layout to have public part first Typedefs that we want to keep private, but must be defined for some public code to work correctly are an exception - avoiding methods in the form T foo() { code; } all on one-line - moving method implementations from .h to .cpp whenever feasible Templatized code is an exception and so are very small methods - generally, adhering to coding conventions followed project-wide Functional changes: - fixed an issue where using ${var} in a summary for an aggregate, and then displaying a pointer-to-aggregate would lead to no summary being displayed The issue was not a major one because all ${var} was meant to do in that context was display an error for invalid use of pointer Accordingly fixed test cases and added a new test case llvm-svn: 137944
2011-08-19 00:38:26 +08:00
{
s << "<invalid use of aggregate type>";
var_success = true;
smarter summary strings: - formats %s %char[] %c and %a now work to print 0-terminated c-strings if they are applied to a char* or char[] even without the [] operator (e.g. ${var%s}) - array formats (char[], intN[], ..) now work when applied to an array of a scalar type even without the [] operator (e.g. ${var%int32_t[]}) LLDB will not crash because of endless loop when trying to obtain a summary for an object that has no value and references itself in its summary string In many cases, a wrong summary string will now display an "<error>" message instead of giving out an empty string llvm-svn: 135007
2011-07-13 06:56:10 +08:00
break;
}
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
if (!is_array_range)
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
{
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[Debugger::FormatPrompt] dumping ordinary printable output");
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
var_success = target->DumpPrintableRepresentation(s,val_obj_display, custom_format);
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
}
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
else
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
{
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[Debugger::FormatPrompt] checking if I can handle as array");
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
if (!is_array && !is_pointer)
break;
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[Debugger::FormatPrompt] handle as array");
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
const char* special_directions = NULL;
StreamString special_directions_writer;
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
if (close_bracket_position && (var_name_end-close_bracket_position > 1))
{
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
ConstString additional_data;
additional_data.SetCStringWithLength(close_bracket_position+1, var_name_end-close_bracket_position-1);
special_directions_writer.Printf("${%svar%s}",
do_deref_pointer ? "*" : "",
additional_data.GetCString());
special_directions = special_directions_writer.GetData();
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
}
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
// let us display items index_lower thru index_higher of this array
s.PutChar('[');
var_success = true;
if (index_higher < 0)
First round of code cleanups: - all instances of "vobj" have been renamed to "valobj" - class Debugger::Formatting has been renamed to DataVisualization (defined in FormatManager.h/cpp) The interface to this class has not changed - FormatCategory now uses ConstString's as keys to the navigators instead of repeatedly casting from ConstString to const char* and back all the time Next step is making the same happen for categories themselves - category gnu-libstdc++ is defined in the constructor for a FormatManager The source code for it is defined in gnu_libstdcpp.py, drawn from examples/synthetic at compile time All references to previous 'osxcpp' name have been removed from both code and file names Functional changes: - the name of the option to use a summary string for 'type summary add' has changed from the previous --format-string to the new --summary-string. It is expected that the short option will change from -f to -s, and -s for --python-script will become -o llvm-svn: 137886
2011-08-18 06:13:59 +08:00
index_higher = valobj->GetNumChildren() - 1;
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
This checking is part one of trying to add some threading safety to our internals. The first part of this is to use a new class: lldb_private::ExecutionContextRef This class holds onto weak pointers to the target, process, thread and frame and it also contains the thread ID and frame Stack ID in case the thread and frame objects go away and come back as new objects that represent the same logical thread/frame. ExecutionContextRef objcets have accessors to access shared pointers for the target, process, thread and frame which might return NULL if the backing object is no longer available. This allows for references to persistent program state without needing to hold a shared pointer to each object and potentially keeping that object around for longer than it needs to be. You can also "Lock" and ExecutionContextRef (which contains weak pointers) object into an ExecutionContext (which contains strong, or shared pointers) with code like ExecutionContext exe_ctx (my_obj->GetExectionContextRef().Lock()); llvm-svn: 150801
2012-02-17 15:49:44 +08:00
uint32_t max_num_children = target->GetTargetSP()->GetMaximumNumberOfChildrenToDisplay();
*Some more optimizations in usage of ConstString *New setting target.max-children-count gives an upper-bound to the number of child objects that will be displayed at each depth-level This might be a breaking change in some scenarios. To override the new limit you can use the --show-all-children (-A) option to frame variable or increase the limit in your lldbinit file *Command "type synthetic" has been split in two: - "type synthetic" now only handles Python synthetic children providers - the new command "type filter" handles filters Because filters and synthetic providers are both ways to replace the children of a ValueObject, only one can be effective at any given time. llvm-svn: 137416
2011-08-12 10:00:06 +08:00
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
for (;index_lower<=index_higher;index_lower++)
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
ValueObject* item = ExpandIndexedExpression (target,
index_lower,
exe_ctx->GetFramePtr(),
false).get();
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
if (!item)
{
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
Resolve printf formatting warnings on Linux: - use macros from inttypes.h for format strings instead of OS-specific types Patch from Matt Kopec! llvm-svn: 168945
2012-11-30 05:49:15 +08:00
log->Printf("[Debugger::FormatPrompt] ERROR in getting child item at index %" PRId64, index_lower);
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
}
else
{
some editing of data visualization error messages to make them more meaningful debugging printfs() for data visualization turned into a meaningful log: - introduced a new log category `types' in channel `lldb' llvm-svn: 135773
2011-07-23 01:03:19 +08:00
if (log)
Improvements to the data formatters logging - plus, new log messages when our dynamic type changes llvm-svn: 166133
2012-10-18 06:23:56 +08:00
log->Printf("[Debugger::FormatPrompt] special_directions for child item: %s",special_directions);
final fix for the global constructors issue new GetValueForExpressionPath() method in ValueObject to navigate expression paths in a more bitfield vs slices aware way changes to the varformats.html document (WIP) llvm-svn: 134679
2011-07-08 10:51:01 +08:00
}
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
if (!special_directions)
var_success &= item->DumpPrintableRepresentation(s,val_obj_display, custom_format);
else
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
var_success &= FormatPromptRecurse(special_directions, sc, exe_ctx, addr, s, NULL, item, function_changed, initial_function);
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
*Some more optimizations in usage of ConstString *New setting target.max-children-count gives an upper-bound to the number of child objects that will be displayed at each depth-level This might be a breaking change in some scenarios. To override the new limit you can use the --show-all-children (-A) option to frame variable or increase the limit in your lldbinit file *Command "type synthetic" has been split in two: - "type synthetic" now only handles Python synthetic children providers - the new command "type filter" handles filters Because filters and synthetic providers are both ways to replace the children of a ValueObject, only one can be effective at any given time. llvm-svn: 137416
2011-08-12 10:00:06 +08:00
if (--max_num_children == 0)
{
s.PutCString(", ...");
break;
}
Fixed some issues with ARM backtraces by not processing any push/pop instructions if they are conditional. Also fixed issues where the PC wasn't getting bit zero stripped for ARM targets when a stack frame was thumb. We now properly call through the GetOpcodeLoadAddress() functions to make sure the addresses are properly stripped for any targets that may decorate up their addresses. We now don't pass the SIGSTOP signals along. We can revisit this soon, but currently this was interfering with debugging some older ARM targets that don't have vCont support in the GDB server. llvm-svn: 134461
2011-07-06 12:07:21 +08:00
if (index_lower < index_higher)
s.PutChar(',');
}
s.PutChar(']');
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
}
This commit adds a new top subcommand "summary" to command type named "type". Currently this command implements three commands: type summary add <format> <typename1> [<typename2> ...] type summary delete <typename1> [<typename2> ...] type summary list [<typename1> [<typename2>] ...] type summary clear This allows you to specify the default format that will be used to display summaries for variables, shown when you use "frame variable" or "expression", or the SBValue classes. Examples: type summary add "x = ${var.x}" Point type summary list type summary add --one-liner SimpleType llvm-svn: 134108
2011-06-30 06:27:15 +08:00
}
new syntax for summary strings: - ${*expr} now simply means to dereference expr before actually using it - bitfields, array ranges and pointer ranges now work in a (hopefully) more natural and language-compliant way a new class TypeHierarchyNavigator replicates the behavior of the FormatManager in going through type hierarchies when one-lining summary strings, children's summaries can be used as well as values llvm-svn: 134458
2011-07-06 10:13:41 +08:00
break;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
case 'a':
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
if (IsToken (var_name_begin, "addr-file-or-load}"))
{
print_file_addr_or_load_addr = true;
}
if (IsToken (var_name_begin, "addr}")
|| IsToken (var_name_begin, "addr-file-or-load}"))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
if (addr && addr->IsValid())
{
var_success = true;
format_addr = *addr;
}
}
break;
case 'p':
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "process."))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
if (exe_ctx)
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
Process *process = exe_ctx->GetProcessPtr();
if (process)
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
var_name_begin += ::strlen ("process.");
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsTokenWithFormat (var_name_begin, "id", token_format, "%" PRIu64, exe_ctx, sc))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
s.Printf(token_format.c_str(), process->GetID());
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
var_success = true;
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if ((IsToken (var_name_begin, "name}")) ||
(IsToken (var_name_begin, "file.basename}")) ||
(IsToken (var_name_begin, "file.fullpath}")))
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
{
Module *exe_module = process->GetTarget().GetExecutableModulePointer();
if (exe_module)
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
if (var_name_begin[0] == 'n' || var_name_begin[5] == 'f')
{
format_file_spec.GetFilename() = exe_module->GetFileSpec().GetFilename();
Made all other "operator bool"s explicit and ensured that all clients use them explicitly. This will hopefully prevent any future confusion where things get cast to types we don't expect. <rdar://problem/15146458> llvm-svn: 191984
2013-10-05 05:35:29 +08:00
var_success = (bool)format_file_spec;
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
}
else
{
format_file_spec = exe_module->GetFileSpec();
Made all other "operator bool"s explicit and ensured that all clients use them explicitly. This will hopefully prevent any future confusion where things get cast to types we don't expect. <rdar://problem/15146458> llvm-svn: 191984
2013-10-05 05:35:29 +08:00
var_success = (bool)format_file_spec;
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "script:"))
In thread and frame format strings, it is now allowed to use Python functions to generate part or all of the output text Specifically, the ${target ${process ${thread and ${frame specifiers have been extended to allow a subkeyword .script:<fctName> (e.g. ${frame.script:FooFunction}) The functions are prototyped as def FooFunction(Object,unused) where object is of the respective SB-type (SBTarget for target.script, ... and so on) This has not been implemented for ${var because it would be akin to a Python summary which is already well-defined in LLDB llvm-svn: 184500
2013-06-21 07:40:21 +08:00
{
var_name_begin += ::strlen("script:");
std::string script_name(var_name_begin,var_name_end);
ScriptInterpreter* script_interpreter = process->GetTarget().GetDebugger().GetCommandInterpreter().GetScriptInterpreter();
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (RunScriptFormatKeyword (s, script_interpreter, process, script_name))
var_success = true;
In thread and frame format strings, it is now allowed to use Python functions to generate part or all of the output text Specifically, the ${target ${process ${thread and ${frame specifiers have been extended to allow a subkeyword .script:<fctName> (e.g. ${frame.script:FooFunction}) The functions are prototyped as def FooFunction(Object,unused) where object is of the respective SB-type (SBTarget for target.script, ... and so on) This has not been implemented for ${var because it would be akin to a Python summary which is already well-defined in LLDB llvm-svn: 184500
2013-06-21 07:40:21 +08:00
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
break;
case 't':
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "thread."))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
if (exe_ctx)
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
Thread *thread = exe_ctx->GetThreadPtr();
if (thread)
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
var_name_begin += ::strlen ("thread.");
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsTokenWithFormat (var_name_begin, "id", token_format, "0x%4.4" PRIx64, exe_ctx, sc))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
s.Printf(token_format.c_str(), thread->GetID());
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
var_success = true;
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsTokenWithFormat (var_name_begin, "protocol_id", token_format, "0x%4.4" PRIx64, exe_ctx, sc))
<rdar://problem/13700260> <rdar://problem/13723772> Modified the lldb_private::Thread to work much better with the OperatingSystem plug-ins. Operating system plug-ins can now return have a "core" key/value pair in each thread dictionary for the OperatingSystemPython plug-ins which allows the core threads to be contained with memory threads. It also allows these memory threads to be stepped, resumed, and controlled just as if they were the actual backing threads themselves. A few things are introduced: - lldb_private::Thread now has a GetProtocolID() method which returns the thread protocol ID for a given thread. The protocol ID (Thread::GetProtocolID()) is usually the same as the thread id (Thread::GetID()), but it can differ when a memory thread has its own id, but is backed by an actual API thread. - Cleaned up the Thread::WillResume() code to do the mandatory parts in Thread::ShouldResume(), and let the thread subclasses override the Thread::WillResume() which is now just a notification. - Cleaned up ClearStackFrames() implementations so that fewer thread subclasses needed to override them - Changed the POSIXThread class a bit since it overrode Thread::WillResume(). It is doing the wrong thing by calling "Thread::SetResumeState()" on its own, this shouldn't be done by thread subclasses, but the current code might rely on it so I left it in with a TODO comment with an explanation. llvm-svn: 180886
2013-05-02 05:54:04 +08:00
{
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
s.Printf(token_format.c_str(), thread->GetProtocolID());
<rdar://problem/13700260> <rdar://problem/13723772> Modified the lldb_private::Thread to work much better with the OperatingSystem plug-ins. Operating system plug-ins can now return have a "core" key/value pair in each thread dictionary for the OperatingSystemPython plug-ins which allows the core threads to be contained with memory threads. It also allows these memory threads to be stepped, resumed, and controlled just as if they were the actual backing threads themselves. A few things are introduced: - lldb_private::Thread now has a GetProtocolID() method which returns the thread protocol ID for a given thread. The protocol ID (Thread::GetProtocolID()) is usually the same as the thread id (Thread::GetID()), but it can differ when a memory thread has its own id, but is backed by an actual API thread. - Cleaned up the Thread::WillResume() code to do the mandatory parts in Thread::ShouldResume(), and let the thread subclasses override the Thread::WillResume() which is now just a notification. - Cleaned up ClearStackFrames() implementations so that fewer thread subclasses needed to override them - Changed the POSIXThread class a bit since it overrode Thread::WillResume(). It is doing the wrong thing by calling "Thread::SetResumeState()" on its own, this shouldn't be done by thread subclasses, but the current code might rely on it so I left it in with a TODO comment with an explanation. llvm-svn: 180886
2013-05-02 05:54:04 +08:00
var_success = true;
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsTokenWithFormat (var_name_begin, "index", token_format, "%" PRIu64, exe_ctx, sc))
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
{
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
s.Printf(token_format.c_str(), (uint64_t)thread->GetIndexID());
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
var_success = true;
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "name}"))
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
{
cstr = thread->GetName();
var_success = cstr && cstr[0];
if (var_success)
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
s.PutCString(cstr);
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "queue}"))
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
{
cstr = thread->GetQueueName();
var_success = cstr && cstr[0];
if (var_success)
s.PutCString(cstr);
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "stop-reason}"))
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
{
StopInfoSP stop_info_sp = thread->GetStopInfo ();
Patch from Matt Kopec <matt.kopec@intel.com> to fix the problem that if two breakpoints were set on consecutive addresses, the continue from the first breakpoint would skip the second. llvm-svn: 166000
2012-10-16 08:09:33 +08:00
if (stop_info_sp && stop_info_sp->IsValid())
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
{
cstr = stop_info_sp->GetDescription();
if (cstr && cstr[0])
{
s.PutCString(cstr);
var_success = true;
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "return-value}"))
Add the ability to capture the return value in a thread's stop info, and print it as part of the thread format output. Currently this is only done for the ThreadPlanStepOut. Add a convenience API ABI::GetReturnValueObject. Change the ValueObject::EvaluationPoint to BE an ExecutionContextScope, rather than trying to hand out one of its subsidiary object's pointers. That way this will always be good. llvm-svn: 146806
2011-12-17 09:35:57 +08:00
{
StopInfoSP stop_info_sp = thread->GetStopInfo ();
Patch from Matt Kopec <matt.kopec@intel.com> to fix the problem that if two breakpoints were set on consecutive addresses, the continue from the first breakpoint would skip the second. llvm-svn: 166000
2012-10-16 08:09:33 +08:00
if (stop_info_sp && stop_info_sp->IsValid())
Add the ability to capture the return value in a thread's stop info, and print it as part of the thread format output. Currently this is only done for the ThreadPlanStepOut. Add a convenience API ABI::GetReturnValueObject. Change the ValueObject::EvaluationPoint to BE an ExecutionContextScope, rather than trying to hand out one of its subsidiary object's pointers. That way this will always be good. llvm-svn: 146806
2011-12-17 09:35:57 +08:00
{
ValueObjectSP return_valobj_sp = StopInfo::GetReturnValueObject (stop_info_sp);
if (return_valobj_sp)
{
<rdar://problem/14393032> DumpValueObject() 2.0 This checkin restores pre-Xcode5 functionality to the "po" (expr -O) command: - expr now has a new --description-verbosity (-v) argument, which takes either compact or full as a value (-v is the same as -vfull) When the full mode is on, "po" will show the extended output with type name, persistent variable name and value, as in (lldb) expr -O -v -- foo (id) $0 = 0x000000010010baf0 { 1 = 2; 2 = 3; } When -v is omitted, or -vcompact is passed, the Xcode5-style output will be shown, as in (lldb) expr -O -- foo { 1 = 2; 2 = 3; } - for a non-ObjectiveC object, LLDB will still try to retrieve a summary and/or value to display (lldb) po 5 5 -v also works in this mode (lldb) expr -O -vfull -- 5 (int) $4 = 5 On top of that, this is a major refactoring of the ValueObject printing code. The functionality is now factored into a ValueObjectPrinter class for easier maintenance in the future DumpValueObject() was turned into an instance method ValueObject::Dump() which simply calls through to the printer code, Dump_Impl has been removed Test case to follow llvm-svn: 191694
2013-10-01 03:11:51 +08:00
return_valobj_sp->Dump(s);
Improve the x86_64 return value decoder to handle most structure returns. Switch from GetReturnValue, which was hardly ever used, to GetReturnValueObject which is much more convenient. Return the "return value object" as a persistent variable if requested. llvm-svn: 147157
2011-12-23 03:12:40 +08:00
var_success = true;
Add the ability to capture the return value in a thread's stop info, and print it as part of the thread format output. Currently this is only done for the ThreadPlanStepOut. Add a convenience API ABI::GetReturnValueObject. Change the ValueObject::EvaluationPoint to BE an ExecutionContextScope, rather than trying to hand out one of its subsidiary object's pointers. That way this will always be good. llvm-svn: 146806
2011-12-17 09:35:57 +08:00
}
}
}
If a hand-called function is interrupted by hitting a breakpoint, then when you continue to finish off the function call, the expression result will be included as part of the thread stop info. llvm-svn: 212506
2014-07-08 09:07:32 +08:00
else if (IsToken (var_name_begin, "completed-expression}"))
{
StopInfoSP stop_info_sp = thread->GetStopInfo ();
if (stop_info_sp && stop_info_sp->IsValid())
{
ClangExpressionVariableSP expression_var_sp = StopInfo::GetExpressionVariable (stop_info_sp);
if (expression_var_sp && expression_var_sp->GetValueObject())
{
expression_var_sp->GetValueObject()->Dump(s);
var_success = true;
}
}
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "script:"))
In thread and frame format strings, it is now allowed to use Python functions to generate part or all of the output text Specifically, the ${target ${process ${thread and ${frame specifiers have been extended to allow a subkeyword .script:<fctName> (e.g. ${frame.script:FooFunction}) The functions are prototyped as def FooFunction(Object,unused) where object is of the respective SB-type (SBTarget for target.script, ... and so on) This has not been implemented for ${var because it would be akin to a Python summary which is already well-defined in LLDB llvm-svn: 184500
2013-06-21 07:40:21 +08:00
{
var_name_begin += ::strlen("script:");
std::string script_name(var_name_begin,var_name_end);
ScriptInterpreter* script_interpreter = thread->GetProcess()->GetTarget().GetDebugger().GetCommandInterpreter().GetScriptInterpreter();
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (RunScriptFormatKeyword (s, script_interpreter, thread, script_name))
var_success = true;
In thread and frame format strings, it is now allowed to use Python functions to generate part or all of the output text Specifically, the ${target ${process ${thread and ${frame specifiers have been extended to allow a subkeyword .script:<fctName> (e.g. ${frame.script:FooFunction}) The functions are prototyped as def FooFunction(Object,unused) where object is of the respective SB-type (SBTarget for target.script, ... and so on) This has not been implemented for ${var because it would be akin to a Python summary which is already well-defined in LLDB llvm-svn: 184500
2013-06-21 07:40:21 +08:00
}
Initial merge of some of the iOS 8 / Mac OS X Yosemite specific lldb support. I'll be doing more testing & cleanup but I wanted to get the initial checkin done. This adds a new SBExpressionOptions::SetLanguage API for selecting a language of an expression. I added adds a new SBThread::GetInfoItemByPathString for retriving information about a thread from that thread's StructuredData. I added a new StructuredData class for representing key-value/array/dictionary information (e.g. JSON formatted data). Helper functions to read JSON and create a StructuredData object, and to print a StructuredData object in JSON format are included. A few Cocoa / Cocoa Touch data formatters were updated by Enrico to track changes in iOS 8 / Yosemite. Before we query a thread's extended information, the system runtime may provide hints to the remote debug stub that it will use to retrieve values out of runtime structures. I added a new SystemRuntime method AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add key-value type data to the initial request that we send to the remote stub. The thread-format formatter string can now retrieve values out of a thread's extended info structured data. The default thread-format string picks up two of these - thread.info.activity.name and thread.info.trace_messages. I added a new "jThreadExtendedInfo" packet in debugserver; I will add documentation to the lldb-gdb-remote.txt doc soon. It accepts JSON formatted arguments (most importantly, "thread":threadnum) and it returns a variety of information regarding the thread to lldb in JSON format. This JSON return is scanned into a StructuredData object that is associated with the thread; UI layers can query the thread's StructuredData to see if key-values are present, and if so, show them to the user. These key-values are likely to be specific to different targets with some commonality among many targets. For instance, many targets will be able to advertise the pthread_t value for a thread. I added an initial rough cut of "thread info" command which will print the information about a thread from the jThreadExtendedInfo result. I need to do more work to make this format reasonably. Han Ming added calls into the pmenergy and pmsample libraries if debugserver is run on Mac OS X Yosemite to get information about the inferior's power use. I added support to debugserver for gathering the Genealogy information about threads, if it exists, and returning it in the jThreadExtendedInfo JSON result. llvm-svn: 210874
2014-06-13 10:37:02 +08:00
else if (IsToken (var_name_begin, "info."))
{
var_name_begin += ::strlen("info.");
StructuredData::ObjectSP object_sp = thread->GetExtendedInfo();
if (object_sp && object_sp->GetType() == StructuredData::Type::eTypeDictionary)
{
var_success = FormatThreadExtendedInfoRecurse (var_name_begin, object_sp, sc, exe_ctx, s);
}
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
}
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "target."))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
// TODO: hookup properties
// if (!target_properties_sp)
// {
// Target *target = Target::GetTargetFromContexts (exe_ctx, sc);
// if (target)
// target_properties_sp = target->GetProperties();
// }
//
// if (target_properties_sp)
// {
// var_name_begin += ::strlen ("target.");
// const char *end_property = strchr(var_name_begin, '}');
// if (end_property)
// {
// ConstString property_name(var_name_begin, end_property - var_name_begin);
// std::string property_value (target_properties_sp->GetPropertyValue(property_name));
// if (!property_value.empty())
// {
// s.PutCString (property_value.c_str());
// var_success = true;
// }
// }
// }
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
Target *target = Target::GetTargetFromContexts (exe_ctx, sc);
if (target)
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
var_name_begin += ::strlen ("target.");
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "arch}"))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
ArchSpec arch (target->GetArchitecture ());
if (arch.IsValid())
{
Abtracted all mach-o and ELF out of ArchSpec. This patch is a modified form of Stephen Wilson's idea (thanks for the input Stephen!). What I ended up doing was: - Got rid of ArchSpec::CPU (which was a generic CPU enumeration that mimics the contents of llvm::Triple::ArchType). We now rely upon the llvm::Triple to give us the machine type from llvm::Triple::ArchType. - There is a new ArchSpec::Core definition which further qualifies the CPU core we are dealing with into a single enumeration. If you need support for a new Core and want to debug it in LLDB, it must be added to this list. In the future we can allow for dynamic core registration, but for now it is hard coded. - The ArchSpec can now be initialized with a llvm::Triple or with a C string that represents the triple (it can just be an arch still like "i386"). - The ArchSpec can still initialize itself with a architecture type -- mach-o with cpu type and subtype, or ELF with e_machine + e_flags -- and this will then get translated into the internal llvm::Triple::ArchSpec + ArchSpec::Core. The mach-o cpu type and subtype can be accessed using the getter functions: uint32_t ArchSpec::GetMachOCPUType () const; uint32_t ArchSpec::GetMachOCPUSubType () const; But these functions are just converting out internal llvm::Triple::ArchSpec + ArchSpec::Core back into mach-o. Same goes for ELF. All code has been updated to deal with the changes. This should abstract us until later when the llvm::TargetSpec stuff gets finalized and we can then adopt it. llvm-svn: 126278
2011-02-23 08:35:02 +08:00
s.PutCString (arch.GetArchitectureName());
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
var_success = true;
}
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "script:"))
In thread and frame format strings, it is now allowed to use Python functions to generate part or all of the output text Specifically, the ${target ${process ${thread and ${frame specifiers have been extended to allow a subkeyword .script:<fctName> (e.g. ${frame.script:FooFunction}) The functions are prototyped as def FooFunction(Object,unused) where object is of the respective SB-type (SBTarget for target.script, ... and so on) This has not been implemented for ${var because it would be akin to a Python summary which is already well-defined in LLDB llvm-svn: 184500
2013-06-21 07:40:21 +08:00
{
var_name_begin += ::strlen("script:");
std::string script_name(var_name_begin,var_name_end);
ScriptInterpreter* script_interpreter = target->GetDebugger().GetCommandInterpreter().GetScriptInterpreter();
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (RunScriptFormatKeyword (s, script_interpreter, target, script_name))
var_success = true;
In thread and frame format strings, it is now allowed to use Python functions to generate part or all of the output text Specifically, the ${target ${process ${thread and ${frame specifiers have been extended to allow a subkeyword .script:<fctName> (e.g. ${frame.script:FooFunction}) The functions are prototyped as def FooFunction(Object,unused) where object is of the respective SB-type (SBTarget for target.script, ... and so on) This has not been implemented for ${var because it would be akin to a Python summary which is already well-defined in LLDB llvm-svn: 184500
2013-06-21 07:40:21 +08:00
}
Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation: - no setting auto completion - very manual and error prone way of getting/setting variables - tons of code duplication - useless instance names for processes, threads Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing". llvm-svn: 162366
2012-08-23 01:17:09 +08:00
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
break;
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
case 'm':
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "module."))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
if (sc && sc->module_sp.get())
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
Module *module = sc->module_sp.get();
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
var_name_begin += ::strlen ("module.");
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "file."))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
if (module->GetFileSpec())
{
var_name_begin += ::strlen ("file.");
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "basename}"))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
format_file_spec.GetFilename() = module->GetFileSpec().GetFilename();
Made all other "operator bool"s explicit and ensured that all clients use them explicitly. This will hopefully prevent any future confusion where things get cast to types we don't expect. <rdar://problem/15146458> llvm-svn: 191984
2013-10-05 05:35:29 +08:00
var_success = (bool)format_file_spec;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "fullpath}"))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
format_file_spec = module->GetFileSpec();
Made all other "operator bool"s explicit and ensured that all clients use them explicitly. This will hopefully prevent any future confusion where things get cast to types we don't expect. <rdar://problem/15146458> llvm-svn: 191984
2013-10-05 05:35:29 +08:00
var_success = (bool)format_file_spec;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
}
}
}
}
break;
case 'f':
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "file."))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
if (sc && sc->comp_unit != NULL)
{
var_name_begin += ::strlen ("file.");
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "basename}"))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
format_file_spec.GetFilename() = sc->comp_unit->GetFilename();
Made all other "operator bool"s explicit and ensured that all clients use them explicitly. This will hopefully prevent any future confusion where things get cast to types we don't expect. <rdar://problem/15146458> llvm-svn: 191984
2013-10-05 05:35:29 +08:00
var_success = (bool)format_file_spec;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "fullpath}"))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
format_file_spec = *sc->comp_unit;
Made all other "operator bool"s explicit and ensured that all clients use them explicitly. This will hopefully prevent any future confusion where things get cast to types we don't expect. <rdar://problem/15146458> llvm-svn: 191984
2013-10-05 05:35:29 +08:00
var_success = (bool)format_file_spec;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
}
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "frame."))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
if (exe_ctx)
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Roll back the changes I made in r193907 which created a new Frame pure virtual base class and made StackFrame a subclass of that. As I started to build on top of that arrangement today, I found that it wasn't working out like I intended. Instead I'll try sticking with the single StackFrame class -- there's too much code duplication to make a more complicated class hierarchy sensible I think. llvm-svn: 193983
2013-11-04 17:33:30 +08:00
StackFrame *frame = exe_ctx->GetFramePtr();
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
if (frame)
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
var_name_begin += ::strlen ("frame.");
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "index}"))
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
{
s.Printf("%u", frame->GetFrameIndex());
var_success = true;
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "pc}"))
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
{
reg_kind = eRegisterKindGeneric;
reg_num = LLDB_REGNUM_GENERIC_PC;
var_success = true;
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "sp}"))
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
{
reg_kind = eRegisterKindGeneric;
reg_num = LLDB_REGNUM_GENERIC_SP;
var_success = true;
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "fp}"))
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
{
reg_kind = eRegisterKindGeneric;
reg_num = LLDB_REGNUM_GENERIC_FP;
var_success = true;
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "flags}"))
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
{
reg_kind = eRegisterKindGeneric;
reg_num = LLDB_REGNUM_GENERIC_FLAGS;
var_success = true;
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "reg."))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
reg_ctx = frame->GetRegisterContext().get();
if (reg_ctx)
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
var_name_begin += ::strlen ("reg.");
if (var_name_begin < var_name_end)
{
std::string reg_name (var_name_begin, var_name_end);
reg_info = reg_ctx->GetRegisterInfoByName (reg_name.c_str());
if (reg_info)
var_success = true;
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "script:"))
In thread and frame format strings, it is now allowed to use Python functions to generate part or all of the output text Specifically, the ${target ${process ${thread and ${frame specifiers have been extended to allow a subkeyword .script:<fctName> (e.g. ${frame.script:FooFunction}) The functions are prototyped as def FooFunction(Object,unused) where object is of the respective SB-type (SBTarget for target.script, ... and so on) This has not been implemented for ${var because it would be akin to a Python summary which is already well-defined in LLDB llvm-svn: 184500
2013-06-21 07:40:21 +08:00
{
var_name_begin += ::strlen("script:");
std::string script_name(var_name_begin,var_name_end);
ScriptInterpreter* script_interpreter = frame->GetThread()->GetProcess()->GetTarget().GetDebugger().GetCommandInterpreter().GetScriptInterpreter();
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (RunScriptFormatKeyword (s, script_interpreter, frame, script_name))
var_success = true;
In thread and frame format strings, it is now allowed to use Python functions to generate part or all of the output text Specifically, the ${target ${process ${thread and ${frame specifiers have been extended to allow a subkeyword .script:<fctName> (e.g. ${frame.script:FooFunction}) The functions are prototyped as def FooFunction(Object,unused) where object is of the respective SB-type (SBTarget for target.script, ... and so on) This has not been implemented for ${var because it would be akin to a Python summary which is already well-defined in LLDB llvm-svn: 184500
2013-06-21 07:40:21 +08:00
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
}
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "function."))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
if (sc && (sc->function != NULL || sc->symbol != NULL))
{
var_name_begin += ::strlen ("function.");
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "id}"))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
if (sc->function)
Resolve printf formatting warnings on Linux: - use macros from inttypes.h for format strings instead of OS-specific types Patch from Matt Kopec! llvm-svn: 168945
2012-11-30 05:49:15 +08:00
s.Printf("function{0x%8.8" PRIx64 "}", sc->function->GetID());
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
else
s.Printf("symbol[%u]", sc->symbol->GetID());
var_success = true;
}
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
if (IsToken (var_name_begin, "changed}") && function_changed)
{
var_success = true;
}
if (IsToken (var_name_begin, "initial-function}") && initial_function)
{
var_success = true;
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "name}"))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
if (sc->function)
cstr = sc->function->GetName().AsCString (NULL);
else if (sc->symbol)
cstr = sc->symbol->GetName().AsCString (NULL);
if (cstr)
{
s.PutCString(cstr);
Fixed and issue where we weren't seeing inlined functions anymore. We also now show the correct pc-offset within the inlined function. llvm-svn: 115522
2010-10-05 01:26:49 +08:00
if (sc->block)
{
Block *inline_block = sc->block->GetContainingInlinedBlock ();
if (inline_block)
{
const InlineFunctionInfo *inline_info = sc->block->GetInlinedFunctionInfo();
if (inline_info)
{
s.PutCString(" [inlined] ");
inline_info->GetName().Dump(&s);
}
}
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
var_success = true;
}
}
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
else if (IsToken (var_name_begin, "name-without-args}"))
{
ConstString name;
if (sc->function)
name = sc->function->GetMangled().GetName (Mangled::ePreferDemangledWithoutArguments);
else if (sc->symbol)
name = sc->symbol->GetMangled().GetName (Mangled::ePreferDemangledWithoutArguments);
if (name)
{
s.PutCString(name.GetCString());
var_success = true;
}
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "name-with-args}"))
Added a new thread and frame format that can be used to display a function name + arguments when the data is available. It seems to work really well, but some more testing is needed before we make this on by default. The new function format name is: ${function.name-with-args} To see how to use these formats see the website: http://lldb.llvm.org/formats.html Here is a sample backtrace of debugging LLDB with LLDB using this new format value: (lldb) thread backtrace all * thread #1: tid = 0x2203, 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10, stop reason = signal SIGINT, name = <lldb.driver.main-thread>, queue = com.apple.main-thread frame #0: 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10 frame #1: 0x00007fff884ae274 libsystem_c.dylib _pthread_cond_wait + 840 frame #2: 0x00000001010778ea LLDB lldb_private::Condition::Wait(this=0x0000000104846770, mutex=0x0000000104846730, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 138 at Condition.cpp:92 frame #3: 0x0000000101244c21 LLDB lldb_private::Predicate<bool>::WaitForValueEqualTo(this=0x0000000104846728, value=true, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 209 at Predicate.h:317 frame #4: 0x0000000100f6eeb2 LLDB lldb_private::Listener::WaitForEventsInternal(this=0x0000000104846660, timeout=0x0000000000000000, broadcaster=0x0000000000000000, broadcaster_names=0x0000000000000000, num_broadcaster_names=0x00000000, event_type_mask=0x00000000, event_sp=0x00007fff5fbfe030) + 386 at Listener.cpp:388 frame #5: 0x0000000100f6f231 LLDB lldb_private::Listener::WaitForEvent(this=0x0000000104846660, timeout=0x0000000000000000, event_sp=0x00007fff5fbfe030) + 81 at Listener.cpp:436 frame #6: 0x0000000100098dcd LLDB lldb::SBListener::WaitForEvent(this=0x00007fff5fbff0f0, timeout_secs=0xffffffff, event=0x00007fff5fbfe430) + 685 at SBListener.cpp:181 frame #7: 0x000000010000628c lldb Driver::MainLoop(this=0x00007fff5fbff620) + 5244 at Driver.cpp:1325 frame #8: 0x0000000100006ca3 lldb main(argc=1, argv=0x00007fff5fbff758, envp=0x00007fff5fbff768) + 419 at Driver.cpp:1460 frame #9: 0x0000000100000d54 lldb start + 52 thread #3: tid = 0x2703, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.debugger.input> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x000000010524d040, timeout_usec=0x004c4b40, error_ptr=0x0000000105640a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x000000010524d040, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000104846270, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000104846270) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001045f6650) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #4: tid = 0x2803, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x0000000105700370, timeout_usec=0x004c4b40, error_ptr=0x00000001056c3a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x0000000105700370, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105700000, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105700000) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x0000000105700430) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #5: tid = 0x2903, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline_output> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x00000001057178f0, timeout_usec=0x004c4b40, error_ptr=0x0000000105980a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x00000001057178f0, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105717580, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105717580) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179b0) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #6: tid = 0x2a03, 0x00007fff88a18af2 libsystem_kernel.dylib read + 10, name = <lldb.driver.commandline_io> frame #0: 0x00007fff88a18af2 libsystem_kernel.dylib read + 10 frame #1: 0x0000000100050c3b libedit.3.dylib read_init + 247 frame #2: 0x0000000100050e96 libedit.3.dylib el_wgetc + 155 frame #3: 0x000000010005115d libedit.3.dylib el_wgets + 578 frame #4: 0x000000010005debc libedit.3.dylib el_gets + 37 frame #5: 0x000000010000d409 lldb IOChannel::LibeditGetInput(this=0x0000000105700490, new_line=0x0000000105a03db0) + 89 at IOChannel.cpp:311 frame #6: 0x000000010000d8b6 lldb IOChannel::Run(this=0x0000000105700490) + 806 at IOChannel.cpp:391 frame #7: 0x000000010000d57d lldb IOChannel::IOReadThread(ptr=0x0000000105700490) + 29 at IOChannel.cpp:345 frame #8: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179f0) + 227 at Host.cpp:549 frame #9: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #10: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 (lldb) llvm-svn: 148110
2012-01-13 16:39:16 +08:00
{
// Print the function name with arguments in it
if (sc->function)
{
var_success = true;
ExecutionContextScope *exe_scope = exe_ctx ? exe_ctx->GetBestExecutionContextScope() : NULL;
cstr = sc->function->GetName().AsCString (NULL);
if (cstr)
{
const InlineFunctionInfo *inline_info = NULL;
VariableListSP variable_list_sp;
bool get_function_vars = true;
if (sc->block)
{
Block *inline_block = sc->block->GetContainingInlinedBlock ();
if (inline_block)
{
get_function_vars = false;
inline_info = sc->block->GetInlinedFunctionInfo();
if (inline_info)
variable_list_sp = inline_block->GetBlockVariableList (true);
}
}
if (get_function_vars)
{
variable_list_sp = sc->function->GetBlock(true).GetBlockVariableList (true);
}
if (inline_info)
{
s.PutCString (cstr);
s.PutCString (" [inlined] ");
cstr = inline_info->GetName().GetCString();
}
VariableList args;
if (variable_list_sp)
<rdar://problem/13621080> This commit changes the ${function.name-with-args} prompt keyword to also tackle structs Previously, since aggregates have no values, this would show up as foo=(null) This checkin changes that to instead print foo=(Foo at 0x123) (i.e. typename at address) There are other potential choices here (summary, one-liner printout of all members, ...) and I would love to hear feedback about better options, if any llvm-svn: 181462
2013-05-09 04:27:37 +08:00
variable_list_sp->AppendVariablesWithScope(eValueTypeVariableArgument, args);
Added a new thread and frame format that can be used to display a function name + arguments when the data is available. It seems to work really well, but some more testing is needed before we make this on by default. The new function format name is: ${function.name-with-args} To see how to use these formats see the website: http://lldb.llvm.org/formats.html Here is a sample backtrace of debugging LLDB with LLDB using this new format value: (lldb) thread backtrace all * thread #1: tid = 0x2203, 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10, stop reason = signal SIGINT, name = <lldb.driver.main-thread>, queue = com.apple.main-thread frame #0: 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10 frame #1: 0x00007fff884ae274 libsystem_c.dylib _pthread_cond_wait + 840 frame #2: 0x00000001010778ea LLDB lldb_private::Condition::Wait(this=0x0000000104846770, mutex=0x0000000104846730, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 138 at Condition.cpp:92 frame #3: 0x0000000101244c21 LLDB lldb_private::Predicate<bool>::WaitForValueEqualTo(this=0x0000000104846728, value=true, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 209 at Predicate.h:317 frame #4: 0x0000000100f6eeb2 LLDB lldb_private::Listener::WaitForEventsInternal(this=0x0000000104846660, timeout=0x0000000000000000, broadcaster=0x0000000000000000, broadcaster_names=0x0000000000000000, num_broadcaster_names=0x00000000, event_type_mask=0x00000000, event_sp=0x00007fff5fbfe030) + 386 at Listener.cpp:388 frame #5: 0x0000000100f6f231 LLDB lldb_private::Listener::WaitForEvent(this=0x0000000104846660, timeout=0x0000000000000000, event_sp=0x00007fff5fbfe030) + 81 at Listener.cpp:436 frame #6: 0x0000000100098dcd LLDB lldb::SBListener::WaitForEvent(this=0x00007fff5fbff0f0, timeout_secs=0xffffffff, event=0x00007fff5fbfe430) + 685 at SBListener.cpp:181 frame #7: 0x000000010000628c lldb Driver::MainLoop(this=0x00007fff5fbff620) + 5244 at Driver.cpp:1325 frame #8: 0x0000000100006ca3 lldb main(argc=1, argv=0x00007fff5fbff758, envp=0x00007fff5fbff768) + 419 at Driver.cpp:1460 frame #9: 0x0000000100000d54 lldb start + 52 thread #3: tid = 0x2703, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.debugger.input> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x000000010524d040, timeout_usec=0x004c4b40, error_ptr=0x0000000105640a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x000000010524d040, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000104846270, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000104846270) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001045f6650) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #4: tid = 0x2803, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x0000000105700370, timeout_usec=0x004c4b40, error_ptr=0x00000001056c3a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x0000000105700370, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105700000, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105700000) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x0000000105700430) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #5: tid = 0x2903, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline_output> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x00000001057178f0, timeout_usec=0x004c4b40, error_ptr=0x0000000105980a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x00000001057178f0, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105717580, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105717580) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179b0) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #6: tid = 0x2a03, 0x00007fff88a18af2 libsystem_kernel.dylib read + 10, name = <lldb.driver.commandline_io> frame #0: 0x00007fff88a18af2 libsystem_kernel.dylib read + 10 frame #1: 0x0000000100050c3b libedit.3.dylib read_init + 247 frame #2: 0x0000000100050e96 libedit.3.dylib el_wgetc + 155 frame #3: 0x000000010005115d libedit.3.dylib el_wgets + 578 frame #4: 0x000000010005debc libedit.3.dylib el_gets + 37 frame #5: 0x000000010000d409 lldb IOChannel::LibeditGetInput(this=0x0000000105700490, new_line=0x0000000105a03db0) + 89 at IOChannel.cpp:311 frame #6: 0x000000010000d8b6 lldb IOChannel::Run(this=0x0000000105700490) + 806 at IOChannel.cpp:391 frame #7: 0x000000010000d57d lldb IOChannel::IOReadThread(ptr=0x0000000105700490) + 29 at IOChannel.cpp:345 frame #8: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179f0) + 227 at Host.cpp:549 frame #9: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #10: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 (lldb) llvm-svn: 148110
2012-01-13 16:39:16 +08:00
if (args.GetSize() > 0)
{
const char *open_paren = strchr (cstr, '(');
When attempting to print function names with arguments in frame formatting, attempt to detect templated functions, and replace the argument list with values outside the template marking. Turns C::f<(this=0x00007fff5fbffb70, x=2, y=1)0>(int, int) into C::f<(C::V)0>(this=0x00007fff5fbffb70, x=2, y=1), which definitely looks more like the real thing. Fixes rdar://14882237 llvm-svn: 215800
2014-08-16 08:56:04 +08:00
const char *close_paren = nullptr;
const char *generic = strchr(cstr, '<');
// if before the arguments list begins there is a template sign
// then scan to the end of the generic args before you try to find
// the arguments list
if (generic && open_paren && generic < open_paren)
{
int generic_depth = 1;
++generic;
for (;
*generic && generic_depth > 0;
generic++)
{
if (*generic == '<')
generic_depth++;
if (*generic == '>')
generic_depth--;
}
if (*generic)
open_paren = strchr(generic, '(');
else
open_paren = nullptr;
}
Added a new thread and frame format that can be used to display a function name + arguments when the data is available. It seems to work really well, but some more testing is needed before we make this on by default. The new function format name is: ${function.name-with-args} To see how to use these formats see the website: http://lldb.llvm.org/formats.html Here is a sample backtrace of debugging LLDB with LLDB using this new format value: (lldb) thread backtrace all * thread #1: tid = 0x2203, 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10, stop reason = signal SIGINT, name = <lldb.driver.main-thread>, queue = com.apple.main-thread frame #0: 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10 frame #1: 0x00007fff884ae274 libsystem_c.dylib _pthread_cond_wait + 840 frame #2: 0x00000001010778ea LLDB lldb_private::Condition::Wait(this=0x0000000104846770, mutex=0x0000000104846730, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 138 at Condition.cpp:92 frame #3: 0x0000000101244c21 LLDB lldb_private::Predicate<bool>::WaitForValueEqualTo(this=0x0000000104846728, value=true, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 209 at Predicate.h:317 frame #4: 0x0000000100f6eeb2 LLDB lldb_private::Listener::WaitForEventsInternal(this=0x0000000104846660, timeout=0x0000000000000000, broadcaster=0x0000000000000000, broadcaster_names=0x0000000000000000, num_broadcaster_names=0x00000000, event_type_mask=0x00000000, event_sp=0x00007fff5fbfe030) + 386 at Listener.cpp:388 frame #5: 0x0000000100f6f231 LLDB lldb_private::Listener::WaitForEvent(this=0x0000000104846660, timeout=0x0000000000000000, event_sp=0x00007fff5fbfe030) + 81 at Listener.cpp:436 frame #6: 0x0000000100098dcd LLDB lldb::SBListener::WaitForEvent(this=0x00007fff5fbff0f0, timeout_secs=0xffffffff, event=0x00007fff5fbfe430) + 685 at SBListener.cpp:181 frame #7: 0x000000010000628c lldb Driver::MainLoop(this=0x00007fff5fbff620) + 5244 at Driver.cpp:1325 frame #8: 0x0000000100006ca3 lldb main(argc=1, argv=0x00007fff5fbff758, envp=0x00007fff5fbff768) + 419 at Driver.cpp:1460 frame #9: 0x0000000100000d54 lldb start + 52 thread #3: tid = 0x2703, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.debugger.input> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x000000010524d040, timeout_usec=0x004c4b40, error_ptr=0x0000000105640a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x000000010524d040, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000104846270, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000104846270) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001045f6650) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #4: tid = 0x2803, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x0000000105700370, timeout_usec=0x004c4b40, error_ptr=0x00000001056c3a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x0000000105700370, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105700000, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105700000) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x0000000105700430) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #5: tid = 0x2903, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline_output> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x00000001057178f0, timeout_usec=0x004c4b40, error_ptr=0x0000000105980a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x00000001057178f0, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105717580, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105717580) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179b0) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #6: tid = 0x2a03, 0x00007fff88a18af2 libsystem_kernel.dylib read + 10, name = <lldb.driver.commandline_io> frame #0: 0x00007fff88a18af2 libsystem_kernel.dylib read + 10 frame #1: 0x0000000100050c3b libedit.3.dylib read_init + 247 frame #2: 0x0000000100050e96 libedit.3.dylib el_wgetc + 155 frame #3: 0x000000010005115d libedit.3.dylib el_wgets + 578 frame #4: 0x000000010005debc libedit.3.dylib el_gets + 37 frame #5: 0x000000010000d409 lldb IOChannel::LibeditGetInput(this=0x0000000105700490, new_line=0x0000000105a03db0) + 89 at IOChannel.cpp:311 frame #6: 0x000000010000d8b6 lldb IOChannel::Run(this=0x0000000105700490) + 806 at IOChannel.cpp:391 frame #7: 0x000000010000d57d lldb IOChannel::IOReadThread(ptr=0x0000000105700490) + 29 at IOChannel.cpp:345 frame #8: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179f0) + 227 at Host.cpp:549 frame #9: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #10: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 (lldb) llvm-svn: 148110
2012-01-13 16:39:16 +08:00
if (open_paren)
<rdar://problem/13502196> Functions in "(anonymous namespace)" was causing LLDB to crash when trying to complete a type and it would also cause functions arguments to appear in wrong place in frame display when showing function arguments. llvm-svn: 177965
2013-03-26 09:45:43 +08:00
{
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (open_paren, "(anonymous namespace)"))
<rdar://problem/13502196> Functions in "(anonymous namespace)" was causing LLDB to crash when trying to complete a type and it would also cause functions arguments to appear in wrong place in frame display when showing function arguments. llvm-svn: 177965
2013-03-26 09:45:43 +08:00
{
open_paren = strchr (open_paren + strlen("(anonymous namespace)"), '(');
if (open_paren)
close_paren = strchr (open_paren, ')');
}
else
close_paren = strchr (open_paren, ')');
}
Added a new thread and frame format that can be used to display a function name + arguments when the data is available. It seems to work really well, but some more testing is needed before we make this on by default. The new function format name is: ${function.name-with-args} To see how to use these formats see the website: http://lldb.llvm.org/formats.html Here is a sample backtrace of debugging LLDB with LLDB using this new format value: (lldb) thread backtrace all * thread #1: tid = 0x2203, 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10, stop reason = signal SIGINT, name = <lldb.driver.main-thread>, queue = com.apple.main-thread frame #0: 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10 frame #1: 0x00007fff884ae274 libsystem_c.dylib _pthread_cond_wait + 840 frame #2: 0x00000001010778ea LLDB lldb_private::Condition::Wait(this=0x0000000104846770, mutex=0x0000000104846730, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 138 at Condition.cpp:92 frame #3: 0x0000000101244c21 LLDB lldb_private::Predicate<bool>::WaitForValueEqualTo(this=0x0000000104846728, value=true, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 209 at Predicate.h:317 frame #4: 0x0000000100f6eeb2 LLDB lldb_private::Listener::WaitForEventsInternal(this=0x0000000104846660, timeout=0x0000000000000000, broadcaster=0x0000000000000000, broadcaster_names=0x0000000000000000, num_broadcaster_names=0x00000000, event_type_mask=0x00000000, event_sp=0x00007fff5fbfe030) + 386 at Listener.cpp:388 frame #5: 0x0000000100f6f231 LLDB lldb_private::Listener::WaitForEvent(this=0x0000000104846660, timeout=0x0000000000000000, event_sp=0x00007fff5fbfe030) + 81 at Listener.cpp:436 frame #6: 0x0000000100098dcd LLDB lldb::SBListener::WaitForEvent(this=0x00007fff5fbff0f0, timeout_secs=0xffffffff, event=0x00007fff5fbfe430) + 685 at SBListener.cpp:181 frame #7: 0x000000010000628c lldb Driver::MainLoop(this=0x00007fff5fbff620) + 5244 at Driver.cpp:1325 frame #8: 0x0000000100006ca3 lldb main(argc=1, argv=0x00007fff5fbff758, envp=0x00007fff5fbff768) + 419 at Driver.cpp:1460 frame #9: 0x0000000100000d54 lldb start + 52 thread #3: tid = 0x2703, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.debugger.input> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x000000010524d040, timeout_usec=0x004c4b40, error_ptr=0x0000000105640a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x000000010524d040, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000104846270, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000104846270) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001045f6650) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #4: tid = 0x2803, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x0000000105700370, timeout_usec=0x004c4b40, error_ptr=0x00000001056c3a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x0000000105700370, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105700000, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105700000) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x0000000105700430) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #5: tid = 0x2903, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline_output> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x00000001057178f0, timeout_usec=0x004c4b40, error_ptr=0x0000000105980a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x00000001057178f0, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105717580, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105717580) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179b0) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #6: tid = 0x2a03, 0x00007fff88a18af2 libsystem_kernel.dylib read + 10, name = <lldb.driver.commandline_io> frame #0: 0x00007fff88a18af2 libsystem_kernel.dylib read + 10 frame #1: 0x0000000100050c3b libedit.3.dylib read_init + 247 frame #2: 0x0000000100050e96 libedit.3.dylib el_wgetc + 155 frame #3: 0x000000010005115d libedit.3.dylib el_wgets + 578 frame #4: 0x000000010005debc libedit.3.dylib el_gets + 37 frame #5: 0x000000010000d409 lldb IOChannel::LibeditGetInput(this=0x0000000105700490, new_line=0x0000000105a03db0) + 89 at IOChannel.cpp:311 frame #6: 0x000000010000d8b6 lldb IOChannel::Run(this=0x0000000105700490) + 806 at IOChannel.cpp:391 frame #7: 0x000000010000d57d lldb IOChannel::IOReadThread(ptr=0x0000000105700490) + 29 at IOChannel.cpp:345 frame #8: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179f0) + 227 at Host.cpp:549 frame #9: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #10: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 (lldb) llvm-svn: 148110
2012-01-13 16:39:16 +08:00
if (open_paren)
s.Write(cstr, open_paren - cstr + 1);
else
{
s.PutCString (cstr);
s.PutChar ('(');
}
Fixed an issue in the debugger format strings that include "${function.name-with-args}" where we grabbed the variable list size from the wrong list (we needed it from "args" and we were getting it from "variable_list_sp"). llvm-svn: 148425
2012-01-19 05:56:18 +08:00
const size_t num_args = args.GetSize();
Added a new thread and frame format that can be used to display a function name + arguments when the data is available. It seems to work really well, but some more testing is needed before we make this on by default. The new function format name is: ${function.name-with-args} To see how to use these formats see the website: http://lldb.llvm.org/formats.html Here is a sample backtrace of debugging LLDB with LLDB using this new format value: (lldb) thread backtrace all * thread #1: tid = 0x2203, 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10, stop reason = signal SIGINT, name = <lldb.driver.main-thread>, queue = com.apple.main-thread frame #0: 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10 frame #1: 0x00007fff884ae274 libsystem_c.dylib _pthread_cond_wait + 840 frame #2: 0x00000001010778ea LLDB lldb_private::Condition::Wait(this=0x0000000104846770, mutex=0x0000000104846730, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 138 at Condition.cpp:92 frame #3: 0x0000000101244c21 LLDB lldb_private::Predicate<bool>::WaitForValueEqualTo(this=0x0000000104846728, value=true, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 209 at Predicate.h:317 frame #4: 0x0000000100f6eeb2 LLDB lldb_private::Listener::WaitForEventsInternal(this=0x0000000104846660, timeout=0x0000000000000000, broadcaster=0x0000000000000000, broadcaster_names=0x0000000000000000, num_broadcaster_names=0x00000000, event_type_mask=0x00000000, event_sp=0x00007fff5fbfe030) + 386 at Listener.cpp:388 frame #5: 0x0000000100f6f231 LLDB lldb_private::Listener::WaitForEvent(this=0x0000000104846660, timeout=0x0000000000000000, event_sp=0x00007fff5fbfe030) + 81 at Listener.cpp:436 frame #6: 0x0000000100098dcd LLDB lldb::SBListener::WaitForEvent(this=0x00007fff5fbff0f0, timeout_secs=0xffffffff, event=0x00007fff5fbfe430) + 685 at SBListener.cpp:181 frame #7: 0x000000010000628c lldb Driver::MainLoop(this=0x00007fff5fbff620) + 5244 at Driver.cpp:1325 frame #8: 0x0000000100006ca3 lldb main(argc=1, argv=0x00007fff5fbff758, envp=0x00007fff5fbff768) + 419 at Driver.cpp:1460 frame #9: 0x0000000100000d54 lldb start + 52 thread #3: tid = 0x2703, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.debugger.input> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x000000010524d040, timeout_usec=0x004c4b40, error_ptr=0x0000000105640a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x000000010524d040, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000104846270, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000104846270) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001045f6650) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #4: tid = 0x2803, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x0000000105700370, timeout_usec=0x004c4b40, error_ptr=0x00000001056c3a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x0000000105700370, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105700000, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105700000) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x0000000105700430) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #5: tid = 0x2903, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline_output> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x00000001057178f0, timeout_usec=0x004c4b40, error_ptr=0x0000000105980a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x00000001057178f0, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105717580, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105717580) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179b0) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #6: tid = 0x2a03, 0x00007fff88a18af2 libsystem_kernel.dylib read + 10, name = <lldb.driver.commandline_io> frame #0: 0x00007fff88a18af2 libsystem_kernel.dylib read + 10 frame #1: 0x0000000100050c3b libedit.3.dylib read_init + 247 frame #2: 0x0000000100050e96 libedit.3.dylib el_wgetc + 155 frame #3: 0x000000010005115d libedit.3.dylib el_wgets + 578 frame #4: 0x000000010005debc libedit.3.dylib el_gets + 37 frame #5: 0x000000010000d409 lldb IOChannel::LibeditGetInput(this=0x0000000105700490, new_line=0x0000000105a03db0) + 89 at IOChannel.cpp:311 frame #6: 0x000000010000d8b6 lldb IOChannel::Run(this=0x0000000105700490) + 806 at IOChannel.cpp:391 frame #7: 0x000000010000d57d lldb IOChannel::IOReadThread(ptr=0x0000000105700490) + 29 at IOChannel.cpp:345 frame #8: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179f0) + 227 at Host.cpp:549 frame #9: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #10: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 (lldb) llvm-svn: 148110
2012-01-13 16:39:16 +08:00
for (size_t arg_idx = 0; arg_idx < num_args; ++arg_idx)
{
<rdar://problem/14862302> For small structs, the frame format now prints them as one-liners This follows the same definition that frame variable does for deciding what a "small struct" is, and as such should be fairly consistent with the variable display in general llvm-svn: 204762
2014-03-26 06:03:52 +08:00
std::string buffer;
Added a new thread and frame format that can be used to display a function name + arguments when the data is available. It seems to work really well, but some more testing is needed before we make this on by default. The new function format name is: ${function.name-with-args} To see how to use these formats see the website: http://lldb.llvm.org/formats.html Here is a sample backtrace of debugging LLDB with LLDB using this new format value: (lldb) thread backtrace all * thread #1: tid = 0x2203, 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10, stop reason = signal SIGINT, name = <lldb.driver.main-thread>, queue = com.apple.main-thread frame #0: 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10 frame #1: 0x00007fff884ae274 libsystem_c.dylib _pthread_cond_wait + 840 frame #2: 0x00000001010778ea LLDB lldb_private::Condition::Wait(this=0x0000000104846770, mutex=0x0000000104846730, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 138 at Condition.cpp:92 frame #3: 0x0000000101244c21 LLDB lldb_private::Predicate<bool>::WaitForValueEqualTo(this=0x0000000104846728, value=true, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 209 at Predicate.h:317 frame #4: 0x0000000100f6eeb2 LLDB lldb_private::Listener::WaitForEventsInternal(this=0x0000000104846660, timeout=0x0000000000000000, broadcaster=0x0000000000000000, broadcaster_names=0x0000000000000000, num_broadcaster_names=0x00000000, event_type_mask=0x00000000, event_sp=0x00007fff5fbfe030) + 386 at Listener.cpp:388 frame #5: 0x0000000100f6f231 LLDB lldb_private::Listener::WaitForEvent(this=0x0000000104846660, timeout=0x0000000000000000, event_sp=0x00007fff5fbfe030) + 81 at Listener.cpp:436 frame #6: 0x0000000100098dcd LLDB lldb::SBListener::WaitForEvent(this=0x00007fff5fbff0f0, timeout_secs=0xffffffff, event=0x00007fff5fbfe430) + 685 at SBListener.cpp:181 frame #7: 0x000000010000628c lldb Driver::MainLoop(this=0x00007fff5fbff620) + 5244 at Driver.cpp:1325 frame #8: 0x0000000100006ca3 lldb main(argc=1, argv=0x00007fff5fbff758, envp=0x00007fff5fbff768) + 419 at Driver.cpp:1460 frame #9: 0x0000000100000d54 lldb start + 52 thread #3: tid = 0x2703, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.debugger.input> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x000000010524d040, timeout_usec=0x004c4b40, error_ptr=0x0000000105640a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x000000010524d040, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000104846270, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000104846270) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001045f6650) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #4: tid = 0x2803, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x0000000105700370, timeout_usec=0x004c4b40, error_ptr=0x00000001056c3a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x0000000105700370, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105700000, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105700000) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x0000000105700430) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #5: tid = 0x2903, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline_output> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x00000001057178f0, timeout_usec=0x004c4b40, error_ptr=0x0000000105980a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x00000001057178f0, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105717580, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105717580) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179b0) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #6: tid = 0x2a03, 0x00007fff88a18af2 libsystem_kernel.dylib read + 10, name = <lldb.driver.commandline_io> frame #0: 0x00007fff88a18af2 libsystem_kernel.dylib read + 10 frame #1: 0x0000000100050c3b libedit.3.dylib read_init + 247 frame #2: 0x0000000100050e96 libedit.3.dylib el_wgetc + 155 frame #3: 0x000000010005115d libedit.3.dylib el_wgets + 578 frame #4: 0x000000010005debc libedit.3.dylib el_gets + 37 frame #5: 0x000000010000d409 lldb IOChannel::LibeditGetInput(this=0x0000000105700490, new_line=0x0000000105a03db0) + 89 at IOChannel.cpp:311 frame #6: 0x000000010000d8b6 lldb IOChannel::Run(this=0x0000000105700490) + 806 at IOChannel.cpp:391 frame #7: 0x000000010000d57d lldb IOChannel::IOReadThread(ptr=0x0000000105700490) + 29 at IOChannel.cpp:345 frame #8: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179f0) + 227 at Host.cpp:549 frame #9: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #10: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 (lldb) llvm-svn: 148110
2012-01-13 16:39:16 +08:00
VariableSP var_sp (args.GetVariableAtIndex (arg_idx));
ValueObjectSP var_value_sp (ValueObjectVariable::Create (exe_scope, var_sp));
<rdar://problem/14862302> For small structs, the frame format now prints them as one-liners This follows the same definition that frame variable does for deciding what a "small struct" is, and as such should be fairly consistent with the variable display in general llvm-svn: 204762
2014-03-26 06:03:52 +08:00
const char *var_representation = nullptr;
Added a new thread and frame format that can be used to display a function name + arguments when the data is available. It seems to work really well, but some more testing is needed before we make this on by default. The new function format name is: ${function.name-with-args} To see how to use these formats see the website: http://lldb.llvm.org/formats.html Here is a sample backtrace of debugging LLDB with LLDB using this new format value: (lldb) thread backtrace all * thread #1: tid = 0x2203, 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10, stop reason = signal SIGINT, name = <lldb.driver.main-thread>, queue = com.apple.main-thread frame #0: 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10 frame #1: 0x00007fff884ae274 libsystem_c.dylib _pthread_cond_wait + 840 frame #2: 0x00000001010778ea LLDB lldb_private::Condition::Wait(this=0x0000000104846770, mutex=0x0000000104846730, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 138 at Condition.cpp:92 frame #3: 0x0000000101244c21 LLDB lldb_private::Predicate<bool>::WaitForValueEqualTo(this=0x0000000104846728, value=true, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 209 at Predicate.h:317 frame #4: 0x0000000100f6eeb2 LLDB lldb_private::Listener::WaitForEventsInternal(this=0x0000000104846660, timeout=0x0000000000000000, broadcaster=0x0000000000000000, broadcaster_names=0x0000000000000000, num_broadcaster_names=0x00000000, event_type_mask=0x00000000, event_sp=0x00007fff5fbfe030) + 386 at Listener.cpp:388 frame #5: 0x0000000100f6f231 LLDB lldb_private::Listener::WaitForEvent(this=0x0000000104846660, timeout=0x0000000000000000, event_sp=0x00007fff5fbfe030) + 81 at Listener.cpp:436 frame #6: 0x0000000100098dcd LLDB lldb::SBListener::WaitForEvent(this=0x00007fff5fbff0f0, timeout_secs=0xffffffff, event=0x00007fff5fbfe430) + 685 at SBListener.cpp:181 frame #7: 0x000000010000628c lldb Driver::MainLoop(this=0x00007fff5fbff620) + 5244 at Driver.cpp:1325 frame #8: 0x0000000100006ca3 lldb main(argc=1, argv=0x00007fff5fbff758, envp=0x00007fff5fbff768) + 419 at Driver.cpp:1460 frame #9: 0x0000000100000d54 lldb start + 52 thread #3: tid = 0x2703, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.debugger.input> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x000000010524d040, timeout_usec=0x004c4b40, error_ptr=0x0000000105640a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x000000010524d040, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000104846270, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000104846270) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001045f6650) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #4: tid = 0x2803, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x0000000105700370, timeout_usec=0x004c4b40, error_ptr=0x00000001056c3a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x0000000105700370, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105700000, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105700000) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x0000000105700430) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #5: tid = 0x2903, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline_output> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x00000001057178f0, timeout_usec=0x004c4b40, error_ptr=0x0000000105980a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x00000001057178f0, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105717580, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105717580) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179b0) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #6: tid = 0x2a03, 0x00007fff88a18af2 libsystem_kernel.dylib read + 10, name = <lldb.driver.commandline_io> frame #0: 0x00007fff88a18af2 libsystem_kernel.dylib read + 10 frame #1: 0x0000000100050c3b libedit.3.dylib read_init + 247 frame #2: 0x0000000100050e96 libedit.3.dylib el_wgetc + 155 frame #3: 0x000000010005115d libedit.3.dylib el_wgets + 578 frame #4: 0x000000010005debc libedit.3.dylib el_gets + 37 frame #5: 0x000000010000d409 lldb IOChannel::LibeditGetInput(this=0x0000000105700490, new_line=0x0000000105a03db0) + 89 at IOChannel.cpp:311 frame #6: 0x000000010000d8b6 lldb IOChannel::Run(this=0x0000000105700490) + 806 at IOChannel.cpp:391 frame #7: 0x000000010000d57d lldb IOChannel::IOReadThread(ptr=0x0000000105700490) + 29 at IOChannel.cpp:345 frame #8: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179f0) + 227 at Host.cpp:549 frame #9: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #10: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 (lldb) llvm-svn: 148110
2012-01-13 16:39:16 +08:00
const char *var_name = var_value_sp->GetName().GetCString();
<rdar://problem/14862302> For small structs, the frame format now prints them as one-liners This follows the same definition that frame variable does for deciding what a "small struct" is, and as such should be fairly consistent with the variable display in general llvm-svn: 204762
2014-03-26 06:03:52 +08:00
if (var_value_sp->GetClangType().IsAggregateType() &&
DataVisualization::ShouldPrintAsOneLiner(*var_value_sp.get()))
{
static StringSummaryFormat format(TypeSummaryImpl::Flags()
.SetHideItemNames(false)
.SetShowMembersOneLiner(true),
"");
format.FormatObject(var_value_sp.get(), buffer);
var_representation = buffer.c_str();
}
else
var_representation = var_value_sp->GetValueAsCString();
<rdar://problem/11844604> When displaying function.name-with-args format will now print "varname=<unavailable>" instead of omitting argument names and values when there is an error reading the value. llvm-svn: 169781
2012-12-11 06:26:34 +08:00
if (arg_idx > 0)
s.PutCString (", ");
Added a new thread and frame format that can be used to display a function name + arguments when the data is available. It seems to work really well, but some more testing is needed before we make this on by default. The new function format name is: ${function.name-with-args} To see how to use these formats see the website: http://lldb.llvm.org/formats.html Here is a sample backtrace of debugging LLDB with LLDB using this new format value: (lldb) thread backtrace all * thread #1: tid = 0x2203, 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10, stop reason = signal SIGINT, name = <lldb.driver.main-thread>, queue = com.apple.main-thread frame #0: 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10 frame #1: 0x00007fff884ae274 libsystem_c.dylib _pthread_cond_wait + 840 frame #2: 0x00000001010778ea LLDB lldb_private::Condition::Wait(this=0x0000000104846770, mutex=0x0000000104846730, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 138 at Condition.cpp:92 frame #3: 0x0000000101244c21 LLDB lldb_private::Predicate<bool>::WaitForValueEqualTo(this=0x0000000104846728, value=true, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 209 at Predicate.h:317 frame #4: 0x0000000100f6eeb2 LLDB lldb_private::Listener::WaitForEventsInternal(this=0x0000000104846660, timeout=0x0000000000000000, broadcaster=0x0000000000000000, broadcaster_names=0x0000000000000000, num_broadcaster_names=0x00000000, event_type_mask=0x00000000, event_sp=0x00007fff5fbfe030) + 386 at Listener.cpp:388 frame #5: 0x0000000100f6f231 LLDB lldb_private::Listener::WaitForEvent(this=0x0000000104846660, timeout=0x0000000000000000, event_sp=0x00007fff5fbfe030) + 81 at Listener.cpp:436 frame #6: 0x0000000100098dcd LLDB lldb::SBListener::WaitForEvent(this=0x00007fff5fbff0f0, timeout_secs=0xffffffff, event=0x00007fff5fbfe430) + 685 at SBListener.cpp:181 frame #7: 0x000000010000628c lldb Driver::MainLoop(this=0x00007fff5fbff620) + 5244 at Driver.cpp:1325 frame #8: 0x0000000100006ca3 lldb main(argc=1, argv=0x00007fff5fbff758, envp=0x00007fff5fbff768) + 419 at Driver.cpp:1460 frame #9: 0x0000000100000d54 lldb start + 52 thread #3: tid = 0x2703, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.debugger.input> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x000000010524d040, timeout_usec=0x004c4b40, error_ptr=0x0000000105640a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x000000010524d040, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000104846270, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000104846270) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001045f6650) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #4: tid = 0x2803, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x0000000105700370, timeout_usec=0x004c4b40, error_ptr=0x00000001056c3a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x0000000105700370, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105700000, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105700000) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x0000000105700430) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #5: tid = 0x2903, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline_output> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x00000001057178f0, timeout_usec=0x004c4b40, error_ptr=0x0000000105980a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x00000001057178f0, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105717580, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105717580) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179b0) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #6: tid = 0x2a03, 0x00007fff88a18af2 libsystem_kernel.dylib read + 10, name = <lldb.driver.commandline_io> frame #0: 0x00007fff88a18af2 libsystem_kernel.dylib read + 10 frame #1: 0x0000000100050c3b libedit.3.dylib read_init + 247 frame #2: 0x0000000100050e96 libedit.3.dylib el_wgetc + 155 frame #3: 0x000000010005115d libedit.3.dylib el_wgets + 578 frame #4: 0x000000010005debc libedit.3.dylib el_gets + 37 frame #5: 0x000000010000d409 lldb IOChannel::LibeditGetInput(this=0x0000000105700490, new_line=0x0000000105a03db0) + 89 at IOChannel.cpp:311 frame #6: 0x000000010000d8b6 lldb IOChannel::Run(this=0x0000000105700490) + 806 at IOChannel.cpp:391 frame #7: 0x000000010000d57d lldb IOChannel::IOReadThread(ptr=0x0000000105700490) + 29 at IOChannel.cpp:345 frame #8: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179f0) + 227 at Host.cpp:549 frame #9: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #10: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 (lldb) llvm-svn: 148110
2012-01-13 16:39:16 +08:00
if (var_value_sp->GetError().Success())
<rdar://problem/13621080> This commit changes the ${function.name-with-args} prompt keyword to also tackle structs Previously, since aggregates have no values, this would show up as foo=(null) This checkin changes that to instead print foo=(Foo at 0x123) (i.e. typename at address) There are other potential choices here (summary, one-liner printout of all members, ...) and I would love to hear feedback about better options, if any llvm-svn: 181462
2013-05-09 04:27:37 +08:00
{
<rdar://problem/14862302> For small structs, the frame format now prints them as one-liners This follows the same definition that frame variable does for deciding what a "small struct" is, and as such should be fairly consistent with the variable display in general llvm-svn: 204762
2014-03-26 06:03:52 +08:00
if (var_representation)
s.Printf ("%s=%s", var_name, var_representation);
<rdar://problem/13621080> This commit changes the ${function.name-with-args} prompt keyword to also tackle structs Previously, since aggregates have no values, this would show up as foo=(null) This checkin changes that to instead print foo=(Foo at 0x123) (i.e. typename at address) There are other potential choices here (summary, one-liner printout of all members, ...) and I would love to hear feedback about better options, if any llvm-svn: 181462
2013-05-09 04:27:37 +08:00
else
s.Printf ("%s=%s at %s", var_name, var_value_sp->GetTypeName().GetCString(), var_value_sp->GetLocationAsCString());
}
<rdar://problem/11844604> When displaying function.name-with-args format will now print "varname=<unavailable>" instead of omitting argument names and values when there is an error reading the value. llvm-svn: 169781
2012-12-11 06:26:34 +08:00
else
s.Printf ("%s=<unavailable>", var_name);
Added a new thread and frame format that can be used to display a function name + arguments when the data is available. It seems to work really well, but some more testing is needed before we make this on by default. The new function format name is: ${function.name-with-args} To see how to use these formats see the website: http://lldb.llvm.org/formats.html Here is a sample backtrace of debugging LLDB with LLDB using this new format value: (lldb) thread backtrace all * thread #1: tid = 0x2203, 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10, stop reason = signal SIGINT, name = <lldb.driver.main-thread>, queue = com.apple.main-thread frame #0: 0x00007fff88a17bca libsystem_kernel.dylib __psynch_cvwait + 10 frame #1: 0x00007fff884ae274 libsystem_c.dylib _pthread_cond_wait + 840 frame #2: 0x00000001010778ea LLDB lldb_private::Condition::Wait(this=0x0000000104846770, mutex=0x0000000104846730, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 138 at Condition.cpp:92 frame #3: 0x0000000101244c21 LLDB lldb_private::Predicate<bool>::WaitForValueEqualTo(this=0x0000000104846728, value=true, abstime=0x0000000000000000, timed_out=0x00007fff5fbfdea7) + 209 at Predicate.h:317 frame #4: 0x0000000100f6eeb2 LLDB lldb_private::Listener::WaitForEventsInternal(this=0x0000000104846660, timeout=0x0000000000000000, broadcaster=0x0000000000000000, broadcaster_names=0x0000000000000000, num_broadcaster_names=0x00000000, event_type_mask=0x00000000, event_sp=0x00007fff5fbfe030) + 386 at Listener.cpp:388 frame #5: 0x0000000100f6f231 LLDB lldb_private::Listener::WaitForEvent(this=0x0000000104846660, timeout=0x0000000000000000, event_sp=0x00007fff5fbfe030) + 81 at Listener.cpp:436 frame #6: 0x0000000100098dcd LLDB lldb::SBListener::WaitForEvent(this=0x00007fff5fbff0f0, timeout_secs=0xffffffff, event=0x00007fff5fbfe430) + 685 at SBListener.cpp:181 frame #7: 0x000000010000628c lldb Driver::MainLoop(this=0x00007fff5fbff620) + 5244 at Driver.cpp:1325 frame #8: 0x0000000100006ca3 lldb main(argc=1, argv=0x00007fff5fbff758, envp=0x00007fff5fbff768) + 419 at Driver.cpp:1460 frame #9: 0x0000000100000d54 lldb start + 52 thread #3: tid = 0x2703, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.debugger.input> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x000000010524d040, timeout_usec=0x004c4b40, error_ptr=0x0000000105640a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x000000010524d040, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000104846270, dst=0x0000000105640a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105640a14, error_ptr=0x0000000105640a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000104846270) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001045f6650) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #4: tid = 0x2803, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x0000000105700370, timeout_usec=0x004c4b40, error_ptr=0x00000001056c3a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x0000000105700370, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105700000, dst=0x00000001056c3a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x00000001056c3a14, error_ptr=0x00000001056c3a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105700000) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x0000000105700430) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #5: tid = 0x2903, 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10, name = <lldb.comm.driver.editline_output> frame #0: 0x00007fff88a17df2 libsystem_kernel.dylib select$DARWIN_EXTSN + 10 frame #1: 0x0000000100f3f072 LLDB lldb_private::ConnectionFileDescriptor::BytesAvailable(this=0x00000001057178f0, timeout_usec=0x004c4b40, error_ptr=0x0000000105980a18) + 722 at ConnectionFileDescriptor.cpp:542 frame #2: 0x0000000100f3e6dd LLDB lldb_private::ConnectionFileDescriptor::Read(this=0x00000001057178f0, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 301 at ConnectionFileDescriptor.cpp:273 frame #3: 0x0000000100f3b8f7 LLDB lldb_private::Communication::ReadFromConnection(this=0x0000000105717580, dst=0x0000000105980a60, dst_len=1024, timeout_usec=0x004c4b40, status=0x0000000105980a14, error_ptr=0x0000000105980a18) + 167 at Communication.cpp:317 frame #4: 0x0000000100f3b197 LLDB lldb_private::Communication::ReadThread(p=0x0000000105717580) + 327 at Communication.cpp:344 frame #5: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179b0) + 227 at Host.cpp:549 frame #6: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #7: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 thread #6: tid = 0x2a03, 0x00007fff88a18af2 libsystem_kernel.dylib read + 10, name = <lldb.driver.commandline_io> frame #0: 0x00007fff88a18af2 libsystem_kernel.dylib read + 10 frame #1: 0x0000000100050c3b libedit.3.dylib read_init + 247 frame #2: 0x0000000100050e96 libedit.3.dylib el_wgetc + 155 frame #3: 0x000000010005115d libedit.3.dylib el_wgets + 578 frame #4: 0x000000010005debc libedit.3.dylib el_gets + 37 frame #5: 0x000000010000d409 lldb IOChannel::LibeditGetInput(this=0x0000000105700490, new_line=0x0000000105a03db0) + 89 at IOChannel.cpp:311 frame #6: 0x000000010000d8b6 lldb IOChannel::Run(this=0x0000000105700490) + 806 at IOChannel.cpp:391 frame #7: 0x000000010000d57d lldb IOChannel::IOReadThread(ptr=0x0000000105700490) + 29 at IOChannel.cpp:345 frame #8: 0x0000000101078923 LLDB ThreadCreateTrampoline(arg=0x00000001057179f0) + 227 at Host.cpp:549 frame #9: 0x00007fff884aa8bf libsystem_c.dylib _pthread_start + 335 frame #10: 0x00007fff884adb75 libsystem_c.dylib thread_start + 13 (lldb) llvm-svn: 148110
2012-01-13 16:39:16 +08:00
}
if (close_paren)
s.PutCString (close_paren);
else
s.PutChar(')');
}
else
{
s.PutCString(cstr);
}
}
}
else if (sc->symbol)
{
cstr = sc->symbol->GetName().AsCString (NULL);
if (cstr)
{
s.PutCString(cstr);
var_success = true;
}
}
}
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
else if (IsToken (var_name_begin, "addr-offset}")
|| IsToken (var_name_begin, "concrete-only-addr-offset-no-padding}"))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
if (IsToken (var_name_begin, "concrete-only-addr-offset-no-padding}"))
{
addr_offset_print_with_no_padding = true;
addr_offset_concrete_func_only = true;
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
var_success = addr != NULL;
if (var_success)
{
format_addr = *addr;
calculate_format_addr_function_offset = true;
}
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "line-offset}"))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
var_success = sc->line_entry.range.GetBaseAddress().IsValid();
if (var_success)
{
format_addr = sc->line_entry.range.GetBaseAddress();
calculate_format_addr_function_offset = true;
}
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "pc-offset}"))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Roll back the changes I made in r193907 which created a new Frame pure virtual base class and made StackFrame a subclass of that. As I started to build on top of that arrangement today, I found that it wasn't working out like I intended. Instead I'll try sticking with the single StackFrame class -- there's too much code duplication to make a more complicated class hierarchy sensible I think. llvm-svn: 193983
2013-11-04 17:33:30 +08:00
StackFrame *frame = exe_ctx->GetFramePtr();
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
var_success = frame != NULL;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
if (var_success)
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
format_addr = frame->GetFrameCodeAddress();
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
calculate_format_addr_function_offset = true;
}
}
}
}
break;
case 'l':
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "line."))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
if (sc && sc->line_entry.IsValid())
{
var_name_begin += ::strlen ("line.");
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "file."))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
var_name_begin += ::strlen ("file.");
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
if (IsToken (var_name_begin, "basename}"))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
format_file_spec.GetFilename() = sc->line_entry.file.GetFilename();
Made all other "operator bool"s explicit and ensured that all clients use them explicitly. This will hopefully prevent any future confusion where things get cast to types we don't expect. <rdar://problem/15146458> llvm-svn: 191984
2013-10-05 05:35:29 +08:00
var_success = (bool)format_file_spec;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsToken (var_name_begin, "fullpath}"))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
format_file_spec = sc->line_entry.file;
Made all other "operator bool"s explicit and ensured that all clients use them explicitly. This will hopefully prevent any future confusion where things get cast to types we don't expect. <rdar://problem/15146458> llvm-svn: 191984
2013-10-05 05:35:29 +08:00
var_success = (bool)format_file_spec;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if (IsTokenWithFormat (var_name_begin, "number", token_format, "%" PRIu64, exe_ctx, sc))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
var_success = true;
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
s.Printf(token_format.c_str(), (uint64_t)sc->line_entry.line);
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
Add format specifiers to various format ids so we can print thread ids in decimal on Linux and FreeBSD. CC: emaste Differential Revision: http://llvm-reviews.chandlerc.com/D1234 llvm-svn: 187425
2013-07-31 00:44:36 +08:00
else if ((IsToken (var_name_begin, "start-addr}")) ||
(IsToken (var_name_begin, "end-addr}")))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
var_success = sc && sc->line_entry.range.GetBaseAddress().IsValid();
if (var_success)
{
format_addr = sc->line_entry.range.GetBaseAddress();
if (var_name_begin[0] == 'e')
format_addr.Slide (sc->line_entry.range.GetByteSize());
}
}
}
}
break;
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
case 'c':
if (IsToken (var_name_begin, "current-pc-arrow"))
{
if (addr && exe_ctx && exe_ctx->GetFramePtr())
{
RegisterContextSP reg_ctx = exe_ctx->GetFramePtr()->GetRegisterContextSP();
if (reg_ctx.get())
{
addr_t pc_loadaddr = reg_ctx->GetPC();
if (pc_loadaddr != LLDB_INVALID_ADDRESS)
{
Address pc;
pc.SetLoadAddress (pc_loadaddr, exe_ctx->GetTargetPtr());
if (pc == *addr)
{
s.Printf ("->");
var_success = true;
}
else
{
s.Printf(" ");
var_success = true;
}
}
}
}
}
break;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
if (var_success)
{
// If format addr is valid, then we need to print an address
if (reg_num != LLDB_INVALID_REGNUM)
{
Roll back the changes I made in r193907 which created a new Frame pure virtual base class and made StackFrame a subclass of that. As I started to build on top of that arrangement today, I found that it wasn't working out like I intended. Instead I'll try sticking with the single StackFrame class -- there's too much code duplication to make a more complicated class hierarchy sensible I think. llvm-svn: 193983
2013-11-04 17:33:30 +08:00
StackFrame *frame = exe_ctx->GetFramePtr();
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
// We have a register value to display...
if (reg_num == LLDB_REGNUM_GENERIC_PC && reg_kind == eRegisterKindGeneric)
{
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
format_addr = frame->GetFrameCodeAddress();
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
else
{
if (reg_ctx == NULL)
Converted the lldb_private::Process over to use the intrusive shared pointers. Changed the ExecutionContext over to use shared pointers for the target, process, thread and frame since these objects can easily go away at any time and any object that was holding onto an ExecutionContext was running the risk of using a bad object. Now that the shared pointers for target, process, thread and frame are just a single pointer (they all use the instrusive shared pointers) the execution context is much safer and still the same size. Made the shared pointers in the the ExecutionContext class protected and made accessors for all of the various ways to get at the pointers, references, and shared pointers. llvm-svn: 140298
2011-09-22 12:58:26 +08:00
reg_ctx = frame->GetRegisterContext().get();
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
if (reg_ctx)
{
if (reg_kind != kNumRegisterKinds)
reg_num = reg_ctx->ConvertRegisterKindToRegisterNumber(reg_kind, reg_num);
reg_info = reg_ctx->GetRegisterInfoAtIndex (reg_num);
var_success = reg_info != NULL;
}
}
}
if (reg_info != NULL)
{
While implementing unwind information using UnwindAssemblyInstEmulation I ran into some cleanup I have been wanting to do when reading/writing registers. Previously all RegisterContext subclasses would need to implement: virtual bool ReadRegisterBytes (uint32_t reg, DataExtractor &data); virtual bool WriteRegisterBytes (uint32_t reg, DataExtractor &data, uint32_t data_offset = 0); There is now a new class specifically designed to hold register values: lldb_private::RegisterValue The new register context calls that subclasses must implement are: virtual bool ReadRegister (const RegisterInfo *reg_info, RegisterValue &reg_value) = 0; virtual bool WriteRegister (const RegisterInfo *reg_info, const RegisterValue &reg_value) = 0; The RegisterValue class must be big enough to handle any register value. The class contains an enumeration for the value type, and then a union for the data value. Any integer/float values are stored directly in an appropriate host integer/float. Anything bigger is stored in a byte buffer that has a length and byte order. The RegisterValue class also knows how to copy register value bytes into in a buffer with a specified byte order which can be used to write the register value down into memory, and this does the right thing when not all bytes from the register values are needed (getting a uint8 from a uint32 register value..). All RegiterContext and other sources have been switched over to using the new regiter value class. llvm-svn: 131096
2011-05-10 04:18:18 +08:00
RegisterValue reg_value;
var_success = reg_ctx->ReadRegister (reg_info, reg_value);
if (var_success)
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Added generic register numbers for simple ABI argument registers and defined the appropriate registers for arm and x86_64. The register names for the arguments that are the size of a pointer or less are all named "arg1", "arg2", etc. This allows you to read these registers by name: (lldb) register read arg1 arg2 arg3 ... You can also now specify you want to see alternate register names when executing the read register command: (lldb) register read --alternate (lldb) register read -A llvm-svn: 131376
2011-05-15 12:12:07 +08:00
reg_value.Dump(&s, reg_info, false, false, eFormatDefault);
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
}
if (format_file_spec)
{
s << format_file_spec;
}
// If format addr is valid, then we need to print an address
if (format_addr.IsValid())
{
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
var_success = false;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
if (calculate_format_addr_function_offset)
{
Address func_addr;
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
if (sc)
{
if (sc->function)
Fixed and issue where we weren't seeing inlined functions anymore. We also now show the correct pc-offset within the inlined function. llvm-svn: 115522
2010-10-05 01:26:49 +08:00
{
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
func_addr = sc->function->GetAddressRange().GetBaseAddress();
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
if (sc->block && addr_offset_concrete_func_only == false)
Fixed and issue where we weren't seeing inlined functions anymore. We also now show the correct pc-offset within the inlined function. llvm-svn: 115522
2010-10-05 01:26:49 +08:00
{
// Check to make sure we aren't in an inline
// function. If we are, use the inline block
// range that contains "format_addr" since
// blocks can be discontiguous.
Block *inline_block = sc->block->GetContainingInlinedBlock ();
AddressRange inline_range;
if (inline_block && inline_block->GetRangeContainingAddress (format_addr, inline_range))
func_addr = inline_range.GetBaseAddress();
}
}
<rdar://problem/10997402> This fix really needed to happen as a previous fix I had submitted for calculating symbol sizes made many symbols appear to have zero size since the function that was calculating the symbol size was calling another function that would cause the calculation to happen again. This resulted in some symbols having zero size when they shouldn't. This could then cause infinite stack traces and many other side affects. llvm-svn: 152244
2012-03-08 05:03:09 +08:00
else if (sc->symbol && sc->symbol->ValueIsAddress())
func_addr = sc->symbol->GetAddress();
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
}
if (func_addr.IsValid())
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
const char *addr_offset_padding = " ";
if (addr_offset_print_with_no_padding)
{
addr_offset_padding = "";
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
if (func_addr.GetSection() == format_addr.GetSection())
{
addr_t func_file_addr = func_addr.GetFileAddress();
addr_t addr_file_addr = format_addr.GetFileAddress();
if (addr_file_addr > func_file_addr)
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
s.Printf("%s+%s%" PRIu64, addr_offset_padding, addr_offset_padding, addr_file_addr - func_file_addr);
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
else if (addr_file_addr < func_file_addr)
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
s.Printf("%s-%s%" PRIu64, addr_offset_padding, addr_offset_padding, func_file_addr - addr_file_addr);
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
var_success = true;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
else
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
{
Target *target = Target::GetTargetFromContexts (exe_ctx, sc);
if (target)
{
addr_t func_load_addr = func_addr.GetLoadAddress (target);
addr_t addr_load_addr = format_addr.GetLoadAddress (target);
if (addr_load_addr > func_load_addr)
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
s.Printf("%s+%s%" PRIu64, addr_offset_padding, addr_offset_padding, addr_load_addr - func_load_addr);
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
else if (addr_load_addr < func_load_addr)
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
s.Printf("%s-%s%" PRIu64, addr_offset_padding, addr_offset_padding, func_load_addr - addr_load_addr);
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
var_success = true;
}
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
}
else
{
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
Target *target = Target::GetTargetFromContexts (exe_ctx, sc);
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
addr_t vaddr = LLDB_INVALID_ADDRESS;
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
if (exe_ctx && !target->GetSectionLoadList().IsEmpty())
vaddr = format_addr.GetLoadAddress (target);
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
if (vaddr == LLDB_INVALID_ADDRESS)
vaddr = format_addr.GetFileAddress ();
if (vaddr != LLDB_INVALID_ADDRESS)
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
{
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
int addr_width = 0;
if (exe_ctx && target)
{
Reinstate setting addr_width to the result of the computation, but in the conditional rather than at initialization time. llvm-svn: 219549
2014-10-11 08:04:42 +08:00
addr_width = target->GetArchitecture().GetAddressByteSize() * 2;
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
}
Print out addresses with the correct width for 32 bit programs. llvm-svn: 119786
2010-11-19 12:16:11 +08:00
if (addr_width == 0)
addr_width = 16;
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
if (print_file_addr_or_load_addr)
{
format_addr.Dump (&s, exe_ctx ? exe_ctx->GetBestExecutionContextScope() : NULL, Address::DumpStyleLoadAddress, Address::DumpStyleModuleWithFileAddress, 0);
}
else
{
s.Printf("0x%*.*" PRIx64, addr_width, addr_width, vaddr);
}
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
var_success = true;
}
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
}
}
if (var_success == false)
success = false;
}
p = var_name_end;
}
else
break;
}
else
{
// We got a dollar sign with no '{' after it, it must just be a dollar sign
s.PutChar(*p);
}
}
else if (*p == '\\')
{
++p; // skip the slash
switch (*p)
{
case 'a': s.PutChar ('\a'); break;
case 'b': s.PutChar ('\b'); break;
case 'f': s.PutChar ('\f'); break;
case 'n': s.PutChar ('\n'); break;
case 'r': s.PutChar ('\r'); break;
case 't': s.PutChar ('\t'); break;
case 'v': s.PutChar ('\v'); break;
case '\'': s.PutChar ('\''); break;
case '\\': s.PutChar ('\\'); break;
case '0':
// 1 to 3 octal chars
{
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
// Make a string that can hold onto the initial zero char,
// up to 3 octal digits, and a terminating NULL.
char oct_str[5] = { 0, 0, 0, 0, 0 };
int i;
for (i=0; (p[i] >= '0' && p[i] <= '7') && i<4; ++i)
oct_str[i] = p[i];
// We don't want to consume the last octal character since
// the main for loop will do this for us, so we advance p by
// one less than i (even if i is zero)
p += i - 1;
unsigned long octal_value = ::strtoul (oct_str, NULL, 8);
if (octal_value <= UINT8_MAX)
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
<rdar://problem/13069948> Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary. So I defined a new "lldb::offset_t" which should be used for all file offsets. After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed. Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections. llvm-svn: 173463
2013-01-26 02:06:21 +08:00
s.PutChar((char)octal_value);
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
}
break;
case 'x':
// hex number in the format
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
if (isxdigit(p[1]))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
++p; // Skip the 'x'
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
// Make a string that can hold onto two hex chars plus a
// NULL terminator
char hex_str[3] = { 0,0,0 };
hex_str[0] = *p;
if (isxdigit(p[1]))
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
{
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
++p; // Skip the first of the two hex chars
hex_str[1] = *p;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
unsigned long hex_value = strtoul (hex_str, NULL, 16);
if (hex_value <= UINT8_MAX)
<rdar://problem/13069948> Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary. So I defined a new "lldb::offset_t" which should be used for all file offsets. After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed. Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections. llvm-svn: 173463
2013-01-26 02:06:21 +08:00
s.PutChar ((char)hex_value);
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
}
else
{
s.PutChar('x');
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
}
break;
default:
There are now to new "settings set" variables that live in each debugger instance: settings set frame-format <string> settings set thread-format <string> This allows users to control the information that is seen when dumping threads and frames. The default values are set such that they do what they used to do prior to changing over the the user defined formats. This allows users with terminals that can display color to make different items different colors using the escape control codes. A few alias examples that will colorize your thread and frame prompts are: settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n' settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n' A quick web search for "colorize terminal output" should allow you to see what you can do to make your output look like you want it. The "settings set" commands above can of course be added to your ~/.lldbinit file for permanent use. Changed the pure virtual void ExecutionContextScope::Calculate (ExecutionContext&); To: void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&); I did this because this is a class that anything in the execution context heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell you what it was really trying to do unless you look at the parameter. llvm-svn: 115485
2010-10-04 09:05:56 +08:00
// Just desensitize any other character by just printing what
// came after the '\'
s << *p;
Added code that will allow completely customizable prompts for use in replacing the "(lldb)" prompt, the "frame #1..." displays when doing stack backtracing and the "thread #1....". This will allow you to see exactly the information that you want to see where you want to see it. This currently isn't hookup up to the prompts yet, but it will be soon. So what is the format of the prompts? Prompts can contain variables that have access to the current program state. Variables are text that appears in between a prefix of "${" and ends with a "}". Some of the interesting variables include: // The frame index (0, 1, 2, 3...) ${frame.index} // common frame registers with generic names ${frame.pc} ${frame.sp} ${frame.fp} ${frame.ra} ${frame.flags} // Access to any frame registers by name where REGNAME is any register name: ${frame.reg.REGNAME} // The current compile unit file where the frame is located ${file.basename} ${file.fullpath} // Function information ${function.name} ${function.pc-offset} // Process info ${process.file.basename} ${process.file.fullpath} ${process.id} ${process.name} // Thread info ${thread.id} ${thread.index} ${thread.name} ${thread.queue} ${thread.stop-reason} // Target information ${target.arch} // The current module for the current frame (the shared library or executable // that contains the current frame PC value): ${module.file.basename} ${module.file.fullpath} // Access to the line entry for where the current frame is when your thread // is stopped: ${line.file.basename} ${line.file.fullpath} ${line.number} ${line.start-addr} ${line.end-addr} Many times the information that you might have in your prompt might not be available and you won't want it to print out if it isn't valid. To take care of this you can enclose everything that must resolve into a scope. A scope is starts with '{' and ends with '}'. For example in order to only display the current file and line number when the information is available the format would be: "{ at {$line.file.basename}:${line.number}}" Broken down this is: start the scope: "{" format whose content will only be displayed if all information is available: "at {$line.file.basename}:${line.number}" end the scope: "}" We currently can represent the infomration we see when stopped at a frame: frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19 with the following format: "frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n" This breaks down to always print: "frame #${frame.index}: ${frame.pc} " only print the module followed by a tick if we have a valid module: "{${module.file.basename}`}" print the function name with optional offset: "{${function.name}{${function.pc-offset}}" print the line info if it is available: "{ at ${line.file.basename}:${line.number}}" then finish off with a newline: "\n" Notice you can also put newlines ("\n") and tabs and everything else you are used to putting in a format string when desensitized with the \ character. Cleaned up some of the user settings controller subclasses. All of them do not have any global settings variables and were all implementing stubs for the get/set global settings variable. Now there is a default version in UserSettingsController that will do nothing. llvm-svn: 114306
2010-09-19 10:33:57 +08:00
break;
}
}
}
if (end)
*end = p;
return success;
}
Add ${ansi.XX} parsing to lldb prompt, use-color setting, and -no-use-colors command line options. settings set use-color [false|true] settings set prompt "${ansi.bold}${ansi.fg.green}(lldb)${ansi.normal} " also "--no-use-colors" on the command prompt llvm-svn: 182609
2013-05-24 04:47:45 +08:00
bool
Debugger::FormatPrompt
(
const char *format,
const SymbolContext *sc,
const ExecutionContext *exe_ctx,
const Address *addr,
Stream &s,
ValueObject* valobj
)
{
bool use_color = exe_ctx ? exe_ctx->GetTargetRef().GetDebugger().GetUseColor() : true;
std::string format_str = lldb_utility::ansi::FormatAnsiTerminalCodes (format, use_color);
if (format_str.length())
format = format_str.c_str();
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
return FormatPromptRecurse (format, sc, exe_ctx, addr, s, NULL, valobj, false, false);
}
bool
Debugger::FormatDisassemblerAddress (const char *format,
const SymbolContext *sc,
const SymbolContext *prev_sc,
const ExecutionContext *exe_ctx,
const Address *addr,
Stream &s)
{
if (format == NULL && exe_ctx != NULL && exe_ctx->HasTargetScope())
{
format = exe_ctx->GetTargetRef().GetDebugger().GetDisassemblyFormat();
}
bool function_changed = false;
bool initial_function = false;
if (prev_sc && (prev_sc->function || prev_sc->symbol))
{
if (sc && (sc->function || sc->symbol))
{
if (prev_sc->symbol && sc->symbol)
{
if (!sc->symbol->Compare (prev_sc->symbol->GetName(), prev_sc->symbol->GetType()))
{
function_changed = true;
}
}
else if (prev_sc->function && sc->function)
{
if (prev_sc->function->GetMangled() != sc->function->GetMangled())
{
function_changed = true;
}
}
}
}
// The first context on a list of instructions will have a prev_sc that
// has no Function or Symbol -- if SymbolContext had an IsValid() method, it
// would return false. But we do get a prev_sc pointer.
if ((sc && (sc->function || sc->symbol))
&& prev_sc && (prev_sc->function == NULL && prev_sc->symbol == NULL))
{
initial_function = true;
}
return FormatPromptRecurse (format, sc, exe_ctx, addr, s, NULL, NULL, function_changed, initial_function);
Add ${ansi.XX} parsing to lldb prompt, use-color setting, and -no-use-colors command line options. settings set use-color [false|true] settings set prompt "${ansi.bold}${ansi.fg.green}(lldb)${ansi.normal} " also "--no-use-colors" on the command prompt llvm-svn: 182609
2013-05-24 04:47:45 +08:00
}
Add a new disassembly-format specification so that the disassembler output style can be customized. Change the built-in default to be more similar to gdb's disassembly formatting. The disassembly-format for a gdb-like output is ${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>: The disassembly-format for the lldb style output is {${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}: The two backticks in the lldb style formatter triggers the sub-expression evaluation in CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to use ' characters instead of ` would work around that. <rdar://problem/9885398> llvm-svn: 219544
2014-10-11 07:07:36 +08:00
Add a logging mode that takes a callback and flush'es to that callback. Also add SB API's to set this callback, and to enable the log channels. llvm-svn: 151018
2012-02-21 10:23:08 +08:00
void
Debugger::SetLoggingCallback (lldb::LogOutputCallback log_callback, void *baton)
{
Make Debugger::SetLoggingCallback public, and expose it through the SB API. Sometimes it is not convenient to provide a log callback right when the debugger is created. llvm-svn: 151209
2012-02-23 06:49:20 +08:00
// For simplicity's sake, I am not going to deal with how to close down any
// open logging streams, I just redirect everything from here on out to the
// callback.
Add a logging mode that takes a callback and flush'es to that callback. Also add SB API's to set this callback, and to enable the log channels. llvm-svn: 151018
2012-02-21 10:23:08 +08:00
m_log_callback_stream_sp.reset (new StreamCallback (log_callback, baton));
}
bool
Debugger::EnableLog (const char *channel, const char **categories, const char *log_file, uint32_t log_options, Stream &error_stream)
{
Log::Callbacks log_callbacks;
StreamSP log_stream_sp;
Removed explicit NULL checks for shared pointers and instead made us use implicit casts to bool. This generated a warning in C++11. <rdar://problem/11930775> llvm-svn: 161559
2012-08-09 08:50:26 +08:00
if (m_log_callback_stream_sp)
Add a logging mode that takes a callback and flush'es to that callback. Also add SB API's to set this callback, and to enable the log channels. llvm-svn: 151018
2012-02-21 10:23:08 +08:00
{
log_stream_sp = m_log_callback_stream_sp;
// For now when using the callback mode you always get thread & timestamp.
log_options |= LLDB_LOG_OPTION_PREPEND_TIMESTAMP | LLDB_LOG_OPTION_PREPEND_THREAD_NAME;
}
else if (log_file == NULL || *log_file == '\0')
{
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
log_stream_sp = GetOutputFile();
Add a logging mode that takes a callback and flush'es to that callback. Also add SB API's to set this callback, and to enable the log channels. llvm-svn: 151018
2012-02-21 10:23:08 +08:00
}
else
{
LogStreamMap::iterator pos = m_log_streams.find(log_file);
<rdar://problem/12953853> Setting breakpoints using "breakpoint set --selector <SEL>" previously didn't when there was no dSYM file. Also fixed issues in the test suite that arose after fixing the bug. Also fixed the log channels to properly ref count the log streams using weak pointers to the streams. This fixes a test suite problem that would happen when you specified a full path to the compiler with the "--compiler" option. llvm-svn: 171816
2013-01-08 08:01:36 +08:00
if (pos != m_log_streams.end())
log_stream_sp = pos->second.lock();
if (!log_stream_sp)
Add a logging mode that takes a callback and flush'es to that callback. Also add SB API's to set this callback, and to enable the log channels. llvm-svn: 151018
2012-02-21 10:23:08 +08:00
{
log_stream_sp.reset (new StreamFile (log_file));
m_log_streams[log_file] = log_stream_sp;
}
}
assert (log_stream_sp.get());
if (log_options == 0)
log_options = LLDB_LOG_OPTION_PREPEND_THREAD_NAME | LLDB_LOG_OPTION_THREADSAFE;
<rdar://problem/13854277> <rdar://problem/13594769> Main changes in this patch include: - cleanup plug-in interface and use ConstStrings for plug-in names - Modfiied the BSD Archive plug-in to be able to pick out the correct .o file when .a files contain multiple .o files with the same name by using the timestamp - Modified SymbolFileDWARFDebugMap to properly verify the timestamp on .o files it loads to ensure we don't load updated .o files and cause problems when debugging The plug-in interface changes: Modified the lldb_private::PluginInterface class that all plug-ins inherit from: Changed: virtual const char * GetPluginName() = 0; To: virtual ConstString GetPluginName() = 0; Removed: virtual const char * GetShortPluginName() = 0; - Fixed up all plug-in to adhere to the new interface and to return lldb_private::ConstString values for the plug-in names. - Fixed all plug-ins to return simple names with no prefixes. Some plug-ins had prefixes and most ones didn't, so now they all don't have prefixed names, just simple names like "linux", "gdb-remote", etc. llvm-svn: 181631
2013-05-11 05:47:16 +08:00
if (Log::GetLogChannelCallbacks (ConstString(channel), log_callbacks))
Add a logging mode that takes a callback and flush'es to that callback. Also add SB API's to set this callback, and to enable the log channels. llvm-svn: 151018
2012-02-21 10:23:08 +08:00
{
log_callbacks.enable (log_stream_sp, log_options, categories, &error_stream);
return true;
}
else
{
LogChannelSP log_channel_sp (LogChannel::FindPlugin (channel));
if (log_channel_sp)
{
if (log_channel_sp->Enable (log_stream_sp, log_options, &error_stream, categories))
{
return true;
}
else
{
error_stream.Printf ("Invalid log channel '%s'.\n", channel);
return false;
}
}
else
{
error_stream.Printf ("Invalid log channel '%s'.\n", channel);
return false;
}
}
return false;
}
<rdar://problem/13443931> Fixed a crasher in the SourceManager where it wasn't checking the m_target member variable for NULL. In doing this fix, I hardened this class to have weak pointers to the debugger and target in case they do go away. I also changed SBSourceManager to hold onto weak pointers to the debugger and target so they don't keep objects alive by holding a strong reference to them. llvm-svn: 177365
2013-03-19 08:20:55 +08:00
SourceManager &
Debugger::GetSourceManager ()
{
if (m_source_manager_ap.get() == NULL)
m_source_manager_ap.reset (new SourceManager (shared_from_this()));
return *m_source_manager_ap;
}
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
// This function handles events that were broadcast by the process.
void
Debugger::HandleBreakpointEvent (const EventSP &event_sp)
{
using namespace lldb;
const uint32_t event_type = Breakpoint::BreakpointEventData::GetBreakpointEventTypeFromEvent (event_sp);
// if (event_type & eBreakpointEventTypeAdded
// || event_type & eBreakpointEventTypeRemoved
// || event_type & eBreakpointEventTypeEnabled
// || event_type & eBreakpointEventTypeDisabled
// || event_type & eBreakpointEventTypeCommandChanged
// || event_type & eBreakpointEventTypeConditionChanged
// || event_type & eBreakpointEventTypeIgnoreChanged
// || event_type & eBreakpointEventTypeLocationsResolved)
// {
// // Don't do anything about these events, since the breakpoint commands already echo these actions.
// }
//
if (event_type & eBreakpointEventTypeLocationsAdded)
{
uint32_t num_new_locations = Breakpoint::BreakpointEventData::GetNumBreakpointLocationsFromEvent(event_sp);
if (num_new_locations > 0)
{
BreakpointSP breakpoint = Breakpoint::BreakpointEventData::GetBreakpointFromEvent(event_sp);
StreamFileSP output_sp (GetOutputFile());
if (output_sp)
{
output_sp->Printf("%d location%s added to breakpoint %d\n",
num_new_locations,
num_new_locations == 1 ? "" : "s",
breakpoint->GetID());
RefreshTopIOHandler();
}
}
}
// else if (event_type & eBreakpointEventTypeLocationsRemoved)
// {
// // These locations just get disabled, not sure it is worth spamming folks about this on the command line.
// }
// else if (event_type & eBreakpointEventTypeLocationsResolved)
// {
// // This might be an interesting thing to note, but I'm going to leave it quiet for now, it just looked noisy.
// }
}
size_t
Debugger::GetProcessSTDOUT (Process *process, Stream *stream)
{
size_t total_bytes = 0;
if (stream == NULL)
stream = GetOutputFile().get();
if (stream)
{
// The process has stuff waiting for stdout; get it and write it out to the appropriate place.
if (process == NULL)
{
TargetSP target_sp = GetTargetList().GetSelectedTarget();
if (target_sp)
process = target_sp->GetProcessSP().get();
}
if (process)
{
Error error;
size_t len;
char stdio_buffer[1024];
while ((len = process->GetSTDOUT (stdio_buffer, sizeof (stdio_buffer), error)) > 0)
{
stream->Write(stdio_buffer, len);
total_bytes += len;
}
}
stream->Flush();
}
return total_bytes;
}
size_t
Debugger::GetProcessSTDERR (Process *process, Stream *stream)
{
size_t total_bytes = 0;
if (stream == NULL)
stream = GetOutputFile().get();
if (stream)
{
// The process has stuff waiting for stderr; get it and write it out to the appropriate place.
if (process == NULL)
{
TargetSP target_sp = GetTargetList().GetSelectedTarget();
if (target_sp)
process = target_sp->GetProcessSP().get();
}
if (process)
{
Error error;
size_t len;
char stdio_buffer[1024];
while ((len = process->GetSTDERR (stdio_buffer, sizeof (stdio_buffer), error)) > 0)
{
stream->Write(stdio_buffer, len);
total_bytes += len;
}
}
stream->Flush();
}
return total_bytes;
}
Make the "synchronous" mode actually work without race conditions. There were many issues with synchronous mode that we discovered when started to try and add a "batch" mode. There was a race condition where the event handling thread might consume events when in sync mode and other times the Process::WaitForProcessToStop() would consume them. This also led to places where the Process IO handler might or might not get popped when it needed to be. llvm-svn: 220254
2014-10-21 09:00:42 +08:00
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
// This function handles events that were broadcast by the process.
void
Debugger::HandleProcessEvent (const EventSP &event_sp)
{
using namespace lldb;
const uint32_t event_type = event_sp->GetType();
ProcessSP process_sp = Process::ProcessEventData::GetProcessFromEvent(event_sp.get());
Make the "synchronous" mode actually work without race conditions. There were many issues with synchronous mode that we discovered when started to try and add a "batch" mode. There was a race condition where the event handling thread might consume events when in sync mode and other times the Process::WaitForProcessToStop() would consume them. This also led to places where the Process IO handler might or might not get popped when it needed to be. llvm-svn: 220254
2014-10-21 09:00:42 +08:00
Fixed all overlapping prompt issues. I carefully reviewed exactly how the IOHandlers interact and found places where we weren't properly controlling things. There should be no overlapping prompts and all output should now come out in a controlled fashion. <rdar://problem/16111293> llvm-svn: 202525
2014-03-01 02:22:24 +08:00
StreamString output_stream;
StreamString error_stream;
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
const bool gui_enabled = IsForwardingEvents();
Fixed all overlapping prompt issues. I carefully reviewed exactly how the IOHandlers interact and found places where we weren't properly controlling things. There should be no overlapping prompts and all output should now come out in a controlled fashion. <rdar://problem/16111293> llvm-svn: 202525
2014-03-01 02:22:24 +08:00
if (!gui_enabled)
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
{
Fixed all overlapping prompt issues. I carefully reviewed exactly how the IOHandlers interact and found places where we weren't properly controlling things. There should be no overlapping prompts and all output should now come out in a controlled fashion. <rdar://problem/16111293> llvm-svn: 202525
2014-03-01 02:22:24 +08:00
bool pop_process_io_handler = false;
assert (process_sp);
Make the "synchronous" mode actually work without race conditions. There were many issues with synchronous mode that we discovered when started to try and add a "batch" mode. There was a race condition where the event handling thread might consume events when in sync mode and other times the Process::WaitForProcessToStop() would consume them. This also led to places where the Process IO handler might or might not get popped when it needed to be. llvm-svn: 220254
2014-10-21 09:00:42 +08:00
Fixed all overlapping prompt issues. I carefully reviewed exactly how the IOHandlers interact and found places where we weren't properly controlling things. There should be no overlapping prompts and all output should now come out in a controlled fashion. <rdar://problem/16111293> llvm-svn: 202525
2014-03-01 02:22:24 +08:00
if (event_type & Process::eBroadcastBitSTDOUT || event_type & Process::eBroadcastBitStateChanged)
{
GetProcessSTDOUT (process_sp.get(), &output_stream);
}
Make the "synchronous" mode actually work without race conditions. There were many issues with synchronous mode that we discovered when started to try and add a "batch" mode. There was a race condition where the event handling thread might consume events when in sync mode and other times the Process::WaitForProcessToStop() would consume them. This also led to places where the Process IO handler might or might not get popped when it needed to be. llvm-svn: 220254
2014-10-21 09:00:42 +08:00
Fixed all overlapping prompt issues. I carefully reviewed exactly how the IOHandlers interact and found places where we weren't properly controlling things. There should be no overlapping prompts and all output should now come out in a controlled fashion. <rdar://problem/16111293> llvm-svn: 202525
2014-03-01 02:22:24 +08:00
if (event_type & Process::eBroadcastBitSTDERR || event_type & Process::eBroadcastBitStateChanged)
{
GetProcessSTDERR (process_sp.get(), &error_stream);
}
Make the "synchronous" mode actually work without race conditions. There were many issues with synchronous mode that we discovered when started to try and add a "batch" mode. There was a race condition where the event handling thread might consume events when in sync mode and other times the Process::WaitForProcessToStop() would consume them. This also led to places where the Process IO handler might or might not get popped when it needed to be. llvm-svn: 220254
2014-10-21 09:00:42 +08:00
Fixed all overlapping prompt issues. I carefully reviewed exactly how the IOHandlers interact and found places where we weren't properly controlling things. There should be no overlapping prompts and all output should now come out in a controlled fashion. <rdar://problem/16111293> llvm-svn: 202525
2014-03-01 02:22:24 +08:00
if (event_type & Process::eBroadcastBitStateChanged)
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
{
Make the "synchronous" mode actually work without race conditions. There were many issues with synchronous mode that we discovered when started to try and add a "batch" mode. There was a race condition where the event handling thread might consume events when in sync mode and other times the Process::WaitForProcessToStop() would consume them. This also led to places where the Process IO handler might or might not get popped when it needed to be. llvm-svn: 220254
2014-10-21 09:00:42 +08:00
Process::HandleProcessStateChangedEvent (event_sp, &output_stream, pop_process_io_handler);
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
}
Make the "synchronous" mode actually work without race conditions. There were many issues with synchronous mode that we discovered when started to try and add a "batch" mode. There was a race condition where the event handling thread might consume events when in sync mode and other times the Process::WaitForProcessToStop() would consume them. This also led to places where the Process IO handler might or might not get popped when it needed to be. llvm-svn: 220254
2014-10-21 09:00:42 +08:00
Fixed all overlapping prompt issues. I carefully reviewed exactly how the IOHandlers interact and found places where we weren't properly controlling things. There should be no overlapping prompts and all output should now come out in a controlled fashion. <rdar://problem/16111293> llvm-svn: 202525
2014-03-01 02:22:24 +08:00
if (output_stream.GetSize() || error_stream.GetSize())
{
StreamFileSP error_stream_sp (GetOutputFile());
"size_t" isn't always 64 bit, it is 32 bit on 32 bit systems. All printf style statements that were assuming size_t were 64 bit were changed, and they were also changed to display them as unsigned values as "size_t" isn't signed. If you print anything with 'size_t', please cast it to "uint64_t" in the printf and use PRIu64 or PRIx64. llvm-svn: 202738
2014-03-04 03:15:20 +08:00
bool top_io_handler_hid = false;
Make the "synchronous" mode actually work without race conditions. There were many issues with synchronous mode that we discovered when started to try and add a "batch" mode. There was a race condition where the event handling thread might consume events when in sync mode and other times the Process::WaitForProcessToStop() would consume them. This also led to places where the Process IO handler might or might not get popped when it needed to be. llvm-svn: 220254
2014-10-21 09:00:42 +08:00
"size_t" isn't always 64 bit, it is 32 bit on 32 bit systems. All printf style statements that were assuming size_t were 64 bit were changed, and they were also changed to display them as unsigned values as "size_t" isn't signed. If you print anything with 'size_t', please cast it to "uint64_t" in the printf and use PRIu64 or PRIx64. llvm-svn: 202738
2014-03-04 03:15:20 +08:00
if (process_sp->ProcessIOHandlerIsActive() == false)
top_io_handler_hid = HideTopIOHandler();
Fixed all overlapping prompt issues. I carefully reviewed exactly how the IOHandlers interact and found places where we weren't properly controlling things. There should be no overlapping prompts and all output should now come out in a controlled fashion. <rdar://problem/16111293> llvm-svn: 202525
2014-03-01 02:22:24 +08:00
if (output_stream.GetSize())
{
StreamFileSP output_stream_sp (GetOutputFile());
if (output_stream_sp)
output_stream_sp->Write (output_stream.GetData(), output_stream.GetSize());
}
if (error_stream.GetSize())
{
StreamFileSP error_stream_sp (GetErrorFile());
if (error_stream_sp)
error_stream_sp->Write (error_stream.GetData(), error_stream.GetSize());
}
if (top_io_handler_hid)
RefreshTopIOHandler();
}
if (pop_process_io_handler)
process_sp->PopProcessIOHandler();
}
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
}
void
Debugger::HandleThreadEvent (const EventSP &event_sp)
{
// At present the only thread event we handle is the Frame Changed event,
// and all we do for that is just reprint the thread status for that thread.
using namespace lldb;
const uint32_t event_type = event_sp->GetType();
if (event_type == Thread::eBroadcastBitStackChanged ||
event_type == Thread::eBroadcastBitThreadSelected )
{
ThreadSP thread_sp (Thread::ThreadEventData::GetThreadFromEvent (event_sp.get()));
if (thread_sp)
{
HideTopIOHandler();
StreamFileSP stream_sp (GetOutputFile());
thread_sp->GetStatus(*stream_sp, 0, 1, 1);
RefreshTopIOHandler();
}
}
}
bool
Debugger::IsForwardingEvents ()
{
return (bool)m_forward_listener_sp;
}
void
Debugger::EnableForwardEvents (const ListenerSP &listener_sp)
{
m_forward_listener_sp = listener_sp;
}
void
Debugger::CancelForwardEvents (const ListenerSP &listener_sp)
{
m_forward_listener_sp.reset();
}
void
Debugger::DefaultEventHandler()
{
Listener& listener(GetListener());
ConstString broadcaster_class_target(Target::GetStaticBroadcasterClass());
ConstString broadcaster_class_process(Process::GetStaticBroadcasterClass());
ConstString broadcaster_class_thread(Thread::GetStaticBroadcasterClass());
BroadcastEventSpec target_event_spec (broadcaster_class_target,
Target::eBroadcastBitBreakpointChanged);
BroadcastEventSpec process_event_spec (broadcaster_class_process,
Process::eBroadcastBitStateChanged |
Process::eBroadcastBitSTDOUT |
Process::eBroadcastBitSTDERR);
BroadcastEventSpec thread_event_spec (broadcaster_class_thread,
Thread::eBroadcastBitStackChanged |
Thread::eBroadcastBitThreadSelected );
listener.StartListeningForEventSpec (*this, target_event_spec);
listener.StartListeningForEventSpec (*this, process_event_spec);
listener.StartListeningForEventSpec (*this, thread_event_spec);
listener.StartListeningForEvents (m_command_interpreter_ap.get(),
CommandInterpreter::eBroadcastBitQuitCommandReceived |
CommandInterpreter::eBroadcastBitAsynchronousOutputData |
CommandInterpreter::eBroadcastBitAsynchronousErrorData );
bool done = false;
while (!done)
{
// Mutex::Locker locker;
// if (locker.TryLock(m_input_reader_stack.GetMutex()))
// {
// if (m_input_reader_stack.IsEmpty())
// break;
// }
//
EventSP event_sp;
if (listener.WaitForEvent(NULL, event_sp))
{
if (event_sp)
{
Broadcaster *broadcaster = event_sp->GetBroadcaster();
if (broadcaster)
{
uint32_t event_type = event_sp->GetType();
ConstString broadcaster_class (broadcaster->GetBroadcasterClass());
if (broadcaster_class == broadcaster_class_process)
{
HandleProcessEvent (event_sp);
}
else if (broadcaster_class == broadcaster_class_target)
{
if (Breakpoint::BreakpointEventData::GetEventDataFromEvent(event_sp.get()))
{
HandleBreakpointEvent (event_sp);
}
}
else if (broadcaster_class == broadcaster_class_thread)
{
HandleThreadEvent (event_sp);
}
else if (broadcaster == m_command_interpreter_ap.get())
{
if (event_type & CommandInterpreter::eBroadcastBitQuitCommandReceived)
{
done = true;
}
else if (event_type & CommandInterpreter::eBroadcastBitAsynchronousErrorData)
{
const char *data = reinterpret_cast<const char *>(EventDataBytes::GetBytesFromEvent (event_sp.get()));
if (data && data[0])
{
StreamFileSP error_sp (GetErrorFile());
if (error_sp)
{
HideTopIOHandler();
error_sp->PutCString(data);
error_sp->Flush();
RefreshTopIOHandler();
}
}
}
else if (event_type & CommandInterpreter::eBroadcastBitAsynchronousOutputData)
{
const char *data = reinterpret_cast<const char *>(EventDataBytes::GetBytesFromEvent (event_sp.get()));
if (data && data[0])
{
StreamFileSP output_sp (GetOutputFile());
if (output_sp)
{
HideTopIOHandler();
output_sp->PutCString(data);
output_sp->Flush();
RefreshTopIOHandler();
}
}
}
}
}
if (m_forward_listener_sp)
m_forward_listener_sp->AddEvent(event_sp);
}
}
}
}
lldb::thread_result_t
Debugger::EventHandlerThread (lldb::thread_arg_t arg)
{
((Debugger *)arg)->DefaultEventHandler();
return NULL;
}
bool
Debugger::StartEventHandlerThread()
{
Fix up the HostThread interface, making the interface simpler. Reviewed by: Greg Clayton Differential Revision: http://reviews.llvm.org/D5417 llvm-svn: 218325
2014-09-24 02:32:09 +08:00
if (!m_event_handler_thread.IsJoinable())
Allow ThreadLauncher::LaunchThread() to specify a minimum stack byte size when launching threads. This defaults to zero, which means to use the system default. NOTE: Windows will need to implement this. <rdar://problem/18644448> llvm-svn: 219821
2014-10-16 02:03:59 +08:00
{
m_event_handler_thread = ThreadLauncher::LaunchThread ("lldb.debugger.event-handler",
EventHandlerThread,
this,
NULL,
8*1024*1024); // Use larger 8MB stack for this thread
}
Fix up the HostThread interface, making the interface simpler. Reviewed by: Greg Clayton Differential Revision: http://reviews.llvm.org/D5417 llvm-svn: 218325
2014-09-24 02:32:09 +08:00
return m_event_handler_thread.IsJoinable();
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
}
void
Debugger::StopEventHandlerThread()
{
Fix up the HostThread interface, making the interface simpler. Reviewed by: Greg Clayton Differential Revision: http://reviews.llvm.org/D5417 llvm-svn: 218325
2014-09-24 02:32:09 +08:00
if (m_event_handler_thread.IsJoinable())
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
{
GetCommandInterpreter().BroadcastEvent(CommandInterpreter::eBroadcastBitQuitCommandReceived);
Create a HostThread abstraction. This patch moves creates a thread abstraction that represents a thread running inside the LLDB process. This is a replacement for otherwise using lldb::thread_t, and provides a platform agnostic interface to managing these threads. Differential Revision: http://reviews.llvm.org/D5198 Reviewed by: Jim Ingham llvm-svn: 217460
2014-09-10 04:54:56 +08:00
m_event_handler_thread.Join(nullptr);
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
}
}
lldb::thread_result_t
Debugger::IOHandlerThread (lldb::thread_arg_t arg)
{
Debugger *debugger = (Debugger *)arg;
debugger->ExecuteIOHanders();
debugger->StopEventHandlerThread();
return NULL;
}
bool
Debugger::StartIOHandlerThread()
{
Fix up the HostThread interface, making the interface simpler. Reviewed by: Greg Clayton Differential Revision: http://reviews.llvm.org/D5417 llvm-svn: 218325
2014-09-24 02:32:09 +08:00
if (!m_io_handler_thread.IsJoinable())
Allow ThreadLauncher::LaunchThread() to specify a minimum stack byte size when launching threads. This defaults to zero, which means to use the system default. NOTE: Windows will need to implement this. <rdar://problem/18644448> llvm-svn: 219821
2014-10-16 02:03:59 +08:00
m_io_handler_thread = ThreadLauncher::LaunchThread ("lldb.debugger.io-handler",
IOHandlerThread,
this,
NULL,
8*1024*1024); // Use larger 8MB stack for this thread
Fix up the HostThread interface, making the interface simpler. Reviewed by: Greg Clayton Differential Revision: http://reviews.llvm.org/D5417 llvm-svn: 218325
2014-09-24 02:32:09 +08:00
return m_io_handler_thread.IsJoinable();
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
}
void
Debugger::StopIOHandlerThread()
{
Fix up the HostThread interface, making the interface simpler. Reviewed by: Greg Clayton Differential Revision: http://reviews.llvm.org/D5417 llvm-svn: 218325
2014-09-24 02:32:09 +08:00
if (m_io_handler_thread.IsJoinable())
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
{
if (m_input_file_sp)
m_input_file_sp->GetFile().Close();
Create a HostThread abstraction. This patch moves creates a thread abstraction that represents a thread running inside the LLDB process. This is a replacement for otherwise using lldb::thread_t, and provides a platform agnostic interface to managing these threads. Differential Revision: http://reviews.llvm.org/D5198 Reviewed by: Jim Ingham llvm-svn: 217460
2014-09-10 04:54:56 +08:00
m_io_handler_thread.Join(nullptr);
Merging the iohandler branch back into main. The many many benefits include: 1 - Input/Output/Error streams are now handled as real streams not a push style input 2 - auto completion in python embedded interpreter 3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use 4 - it is now possible to use curses to drive LLDB (please try the "gui" command) We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases. llvm-svn: 200263
2014-01-28 07:43:24 +08:00
}
}